process technology inc
TRANSCRIPT
flowing rinses inside a barrel in a single rinse station, using very little water. Also shown will be the Evapora- tive Tank atmospheric evaporator and the new ET-Companion Condenser. The ET-Companion removes emis- sions concerns by closing the loop on the evaporator’s air stream.
CirCb723OfllWdWintormatiOnd
Precious Metals Processing Consultants Inc. Palisades Park, NJ.
PMPC will display its Ionnet, Gold Bug, and X-Metal Bug, all electrolytic recovery systems for both heavy and precious metals. Employing expanded surface area cathodes, which are dis- posable, these systems have proved to be an extremely cost-effective means of complying with environmental reg- ulations as well as turning effluent into saleable scrap.
citi724onmaderi-card
Process Electronics Corp. Gasfonia, N. C.
PEC offers three rectifiers ideally suited for automated plating applica- tions. The Miniverter is a single-phase, air-cooled power supply capable of up to 300 A and 18 V in a small footprint cabinet. The MACC is a three-phase
air-cooled line of rectifiers supplying up to 12,000 A and 60 V. The SASSC is a three-phase completely sealed liquid-cooled line featuring small size and maximum reliability. All rectifiers can be supplied with interfaces for PLCs, computers, and remote opera- tion systems. Parameters include moni- tor and control of output voltage and current and all rectifier operational conditions.
cilcle725onmaderl&mlatbncad
Process Technology Inc. Men tar, Ohio
Process Technology will feature the Hzot Shot Electric Instantaneous Heater, designed for instant heating to suitable processing temperatures. The unit can be used in corrosive as well as water service. It is available from 3-48 kW, 240 or 480 V, three-phase stan- dard (other voltages also available).
St. Louis, Missouri ??Denver, Colorado ??Dallas, Texas ??Overland Park, Kansas 4800 East 63rd Street ??Kansas City, Missauri 64130 ??(816) 333-4375
Modem plating shop design calls for expertise that blends requirements for waste minimization, resource recovery, increased production, worker safety and quality control.
Bums & McDonnell’s comprehensive experience with new shops, expansions and modernizations results in facilities that optimize operations while meeting environmental and safety requirements.
For more information on services for plating shops and related industrial facilities, call Woody Allen or Chris Baxter
Circle 026 on reader information card
68 METAL FINISHING . JUNE 1995
Important features of the H,ot Shot include its corrosion-resistant design; spacesaving, energy-efficient point-of- use service; GFCI for safety; a supervi- sory circuit that monitors flow, fluid, and element temperature; and easy installation.
ckle726ollmllderrnforrrmtkncsNi Production Concepts Inc. lMJo&t0&, 111.
PC1 will introduce the Enercon Sys- tern, a permanent replacement for the traditional steam trap system. Individ- ual Enercon assemblies include a stain- less steel condensate removal unit with no moving parts to fail, a Y-strainer, and a blowdown valve. The Enercon System cuts start-up time, improves process efficiency, lowers fuel costs, and eliminates steam trap repairs. This technology paired with Scale Control provides a total plant improvement in the efficiency of steam and water systems. The Scale Control System is a nonchemical, electrostatic water treat- ment that removes and prevents scale
build-up, thereby increasing fuel and equipment efficiency and reducing chemical use.
ollcle727onfeaderilMolm&ncerd
Prominent Fluid Controls Inc. Pittsburgh
Prominent Fluid Controls will ex- hibit chemical feel systems, ‘including metering pumps, sensors, and control- lers for automatic bath replenishment, chromium reduction, cyanide oxida- tion, and wastewater treatment. Sen- sors/controllers for pH, ORP, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid, and conductivity will also be shown.
CifCb728OIllWdWinfom\atknC8rd
Prosys Corp. Chelmsford, Mass.
Prosys will present turnkey microfil- tration systems for the removal of toxic heavy metals, the Prosys RRS system for the recycle of rinsewaters, and the Prosys ACRU system for the treatment
and reuse of alkaline cleaner solutions. Prosys Corp. provides membrane- based solutions to process water recy- cle, aqueous cleaner recycle, and in- dustrial wastewater treatment needs.
CllCle729LWfW&Wi~~
Rapid Power Technologies Inc. Brookfield, Conn.
Rapid Power Technologies Inc. will display the transistor switch mode DC power supplies, thyristor SCR DC units, polarity reversing switches, and amp-hour meters.
CilW73oWlreederMOlllWhCard
FIFE Industries Inc. Keasbey, N.J.
RFE Industries manufactures pure silver anodes and will be displaying their new Oxy-Free silver popcorn anodes as well as Oxy-Free silver slab anodes and silver salts. RFE will introduce their new Quantum additives for tin and tin/lead plating baths, which complement their line of tin and tin- lead anodes including the new Hyper-
Attention Cyanide Platers: Are you troubled by.. . ??carbonate build-up ??poor efficiency ??reduced brightness ??slow plating rates . production rejects?
Try CARB-OUT and Make Your Life Easier! Freezing out carbonates is difficult-often impossible -
and most chemical treatments have their own problems. But CARB-OUT was developed specifically for cyanide baths. BARB-our offala these benefits:
?? Contains No Caustic or Cyanide - Bath balance is maintained
?? Liquid System - Easy to control and mix ?? Highly Effective - Removes carbonates even from
potassium-based solutions. BARB-OUT is considered non-hazardous, and shipment is
not regulated by the Department of Transportation.Yet, as with all chemical products, reasonable care should be taken.
CYANIDES PROPRIETARY Copper Cyanide CHEMICALS
Potassium Cyanide WDL #512 - produces in- Sodium Cyanide visible, corrosion resistant
Zinc Cvanide coating to prevent staining,
COPPER and tarnishing and finger-prints-
BRASS ANODES CLEANER #I105 - alkaline cleaner for soak, electrolytic,
HYDROXIDES or tumble cleaning on cop- per, brass, steel and zinc
Potassium Hydroxide Sodium Hydroxide
base die castings. Can condi- tion copper, brass, steel and
ROCHELLE sALTs zinc base,die castings for unrform, blrster-free platmg.
For a FREE product data sheet call:
ACCUf?ATE LABS.
DIVISION OF R I N. I N C.
2707 W. Chicago Ave., Chicago, IL 60622 Phone: (312) 384-4522 ??Fax: (312) 384-8681
Complete Stock of Raw Chemicals Used Specifically in the Metal Finishing Industry.
FUN, tNC. 4831 S. Whipple St., Chicago, IL 60632
Phone: (312) 523-0784 ??Fax: (312) 523-7838
Circle 003 on reader information card
METAL FINISHING . JUNE 1995 69