procuct presentation clivetpack2 · 2017. 12. 25. · procuct presentation clivetpack2 packaged air...
TRANSCRIPT
CLIVETPack2 1
Procuct presentation
CLIVETPack2Packaged air conditioner cooling only/heat pump air to air – rooftop type
CLIVETPack2 2
CLIVETPack2: is the state of the art on rooftop
The advanced package
Almost all plant components are packed into the unit
Each CLIVETPACK is factory tested before shipment
On-site operation and first cost are dramatically reduced
Specialised by application
From 0 to 100% fresh air to best serve different applications
Developers and consultants can industrialise HVAC design and realisation
High efficiency and reliability
Low consumption solutions on both thermal energy production and ventilation
De-centralised design to operate only when and where needed
CLIVETPack2 3CLIVETPACK XHE
CLIVETPack2: specialized on application
Fresh air is the driver for different series
MEDIUM ATTENDANCE
Air source
Water source
HIGH ATTENDANCE
FULL FRESH AIR
CLIVETPack2 4CLIVETPACK XHE
CLIVETPACK 2 at a glance
XHE packages:
Are designed for outdoor installation
Perform Ventilation, Filtration, Cooling or Heating
Can do Make-up air and Thermodynamic energy recovery
Fully suit with Commercial and Industrial applications
CLIVETPack2 5
The complete seriesFU
LL
FRES
H A
IR
2000 3000 4000 200009000 25000 60000Supply Airflow m3/h
HIG
H
ATT
END
AN
CE
MID
ATT
END
AN
CE
CLI
VET
PA
CK
2
CSN
X-X
HE2
CKT/
CKN
-XH
E
CLIV
ETPA
CK
2
CSR
N-X
HE2
FFA
CLI
VET
PA
CK
2SM
AR
TPA
CK
CRH
-XH
E2CS
RT/
CSR
N-X
HE2
N ---
N ---
N
T ---
---
--- ---
NHSE
T ---
---
1 CIRCUIT
2 CIRCUITS
2 CIRCUITS
2 CIRCUITS
Feb2016
> 25000 m3/h
Mar2016
CLIVETPack2 6
CLIVETPack2
Medium Attendance application
CLIVETPack2 7
The series for medium attendanceFU
LL
FRES
H A
IR
2000 3000 4000 200009000 25000 60000Supply Airflow m3/h
HIG
H
ATT
END
AN
CE
MID
ATT
END
AN
CE
CLI
VET
PA
CK
2
CSN
X-X
HE2
CKT/
CKN
-XH
E
CLIV
ETPA
CK
2
CSR
N-X
HE2
FFA
CLI
VET
PA
CK
2SM
AR
TPA
CK
CRH
-XH
E2CS
RT/
CSR
N-X
HE2
N ---
N ---
N
T ---
---
--- ---
NHSE
T ---
---
1 CIRCUIT
2 CIRCUITS
2 CIRCUITS
2 CIRCUITS
Feb2016
> 25000 m3/h
Mar2016
CLIVETPack2 8
Main features
Thermodynamic
recovery ThOR
Exhaust
section
Air handling
Electrical panel Double
refrigeration
circuit
High efficiency
supply fans
Fresh air
CLIVETPack2 9
Features: total recirculation, fresh air
Return airFresh air
(optional)
Supply air
CLIVETPack2 10
Features: Freecooling and energy recovery
Return airFresh air
Supply air
Exhaust air
ThOR
(optional)
CLIVETPack2 11
Automatic air management
Main ventilation section
win the pressure drop of supply and return
Fresh air damper + exhaust ventilation section, realize:
• renewal air
• thermal freecooling (enthalpy in option)
CLIVETPack2 12
ThOR Thermodynamic Overboost Recovery
Thermodynamic energy recovery is based on reversible heat pump technology. The
heating and cooling capacity production circuit employs exhaust air as a source of heat,
which is favorable both in the winter and summer operating mode.
For this matter:
• the seasonal efficiency of capacity production is greater than a conventional
refrigeration circuit, which employs outdoor air as a source of heat;
• the capacity output is much more stable compared with passive exchangers as the
outdoor conditions vary,
• does not employ passive exchangers and therefore also eliminates higher
consumption due to ventilation;
• it is integrated in the unit, which has an extremely compact design
12
CLIVETPack2 13
ThOR: benefits
13
Great energy saving
127.78863.198
179.508
111.947
279.110
212.578
0
100.000
200.000
300.000
400.000
500.000
600.000
8.7934.348
12.351
7.703
23.146
14.627
0
5.000
10.000
15.000
20.000
25.000
30.000
35.000
40.000
45.000
50.000
35.757
17.684
50.229
31.325
54.185
59.483
0
20.000
40.000
60.000
80.000
100.000
120.000
140.000
160.000
Il Recupero energetico termodinamico ThOR di CLIVET
This means that during the annual operation cycle, the power absorbed by the thermodynamic recovery unit is
less compared to the rooftop unit with the enthalpy wheel recovery unit based on both selection criteria adopted
(type 1 compact enthalpy wheel and type 2 enthalpy wheel with low front speed).
THERMODYNAMIC CIRCUIT HANDLING FANS
Total electricity absorbed [kWh]
U nit with t yp e 1 enth alp y w he el U nit with t yp e 2 enth alp y w he el U nit with th e rm o dy na m ic r e co ve r y
0
20.000
40.000
60.000
80.000
100.000
120.000
100.782
23.350
77.433 55.876 27.362
23.754
35.736
79.631
63.098
-21%
-32% -37%
CLIVETPack2 14
Ventilation full control
• Plug-fan with electronic control (EC)
• Brushless technology = max efficiency
• Single fan section for air supply and return
• Smaller fan, semplifies maintenance and doesn’t stop
ventilation
• Fan speed control = simple start-up on site
• Costant supply airflow or variable airflow rate
• High static pressure electric fans
Standard High static pressure
CLIVETPack2 15
High efficiency EC brushless plug-fan
Keeping the same airflow / pressure,
the ventilation system saves 30% energy than traditional solutions
Electric motor absorbed capacity, manufacturer data
Example referred to a flow of 7.800 m3/h with external static pressure of 500 Pa
CLIVETPack2 16
Very high efficiency filtrations
1 2 3 4AIR SPEED [m/s]0
100
200
300
PRESSURE DROP ON AIR FILTERS [ Pa ]
DESIGN VALUE
400
TraditionalH10
TraditionalF7
ElectronicH10
310
170
30
Electronic filters =15% of
energy saving for lower drop
pressure than traditional
• G4 filters on first stage
• F7 filters or Electronic filters on second stage
CLIVETPack2 17
Effective air flow rate management
• ECO mode: airflow supply remains constant at varied thermal
loads and is shutdown when the load is fullfilled
• Constant airflow rate: fan varies speed also with progressive
filter clogging
• Variable airflow rate: supply airflow varies depending on the
thermal load up to a minimum compatible value with
distribution system. 40% of Airflow reduction 70% energy
savings100%
AIRFLOW
NOMINAL
MIN
75%50%
25%
COMPRESSOR LOAD
0
100%
AIRFLOW
NOMINAL
75%50%
25%
COMPRESSOR LOAD
0
SETHEAT
SETCOOL
SETHEAT
ECO
SETCOOL
ECO
100%
AIRFLOW
NOMINAL
75%50%
25%
COMPRESSOR LOAD
0
CLIVETPack2 18
High efficiency external axial fans
ECOBREEZE brushless mortor with electronic
commutation. Managed with condensation pressure:
- Increase the efficiency
- Increase the working life
- Reduction in the electrical consumption by the system
Innovative Winglet able to increase
aerodynamic efficiency and reduce
the sound emission than traditional
fans.
CLIVETPack2 19CLIVETPACK XHE
High efficiency on heating
Heat pump is the main solution for heating:
Suitable for cold climates, up to –12°C
Reduced defrosting, thanks to:
Thermodynamic recovery, active where coils would start freezing
Ice protection system / Predictive defrost logic
Optimal energy efficiency
Primary energy consumption is much lower than for gas heaters
Optimal investment
The Heat pump option has a minimum price impact
Operation cost is as lower as COP is higher than 1,9
CLIVETPack2 20CLIVETPACK XHE
High efficiency in defrosting
Heat Pump versions includes:
Ice Protection System and Predictive logic
Optimal defrost, only when needed
Two indipendent circuits for alternate Defrost
1
4
2
3
CLIVETPack2 21CLIVETPACK XHE
High efficiency on heating
Three further options are available for heating
1) Electric heaters
2) Hot water coil with 3-way valve
3) Condensing Gas heater
4) Energy recovery from food refrigeration (water coil)
CLIVETPack2 22CLIVETPACK XHE
High efficiency on heating
Electric heaters
1) Keep the unit packaged (no gas, no water connections)
2) Integrate the HP capacity
3) Can work as pre-heating, before the HP coil
NO GAS
REQUIRED
-12°C
OPERATIONFULL ELECTRIC
PACKAGE
CLIVETPack2 23CLIVETPACK XHE
High efficiency on heating
Hot water coil
1) Provides Integration / Pre-heating
2) Can work as the sole heater below a set temperature
3) Replaces the HP in case of emergency
4) Includes the modulating 3-way valve
ON BOARD
MODULATING
VALVE
-20°C
OPERATION
FOR VERY LOW
AMBIENT
TEMPERATURE
CLIVETPack2 24
High efficiency on heating
Gas heater, condensing type with modulating regulation
1) High efficiency, up to 105%
2) Full package, including valves and cheminy
3) Provides Integration / Full heating / Emergency
4) No water No pumps / No freezing
-30°C
OPERATION
FOR VERY LOW
AMBIENT
TEMPERATURE
CLIVETPack2 25
Heat pump and gas burner module
1. Bivalent function
2. Hybrid function
3. Heat pump
4. Thermal load line
Hibryd or bivalent operation, criteria to determine the capacity:
CLIVETPack2 26
New gas burner
1 Condensation technology with modulating
control
High efficiency > 105% Pci
Accurate control capacity
2 Standard burner with 2-stage control
Robust and low capital cost
Efficiency < 93% PCI
Both with vertical development
CLIVETPack2 27
Application for very cold climate
Besides auxiliary heating options:
A) Heater thermostatically controlled
B) Air damper in special esecution
C) Motorised actuator suitable for low temperature
Out door temperature
from -10°C to -30°C
A B
C
CLIVETPack2 28CLIVETPACK XHE
Winter comfort with humidification
Water to waste evaporating wet-deck humidifier
• Fast and effective humidification
• Continuous renewal of water
• Automatic washing cycle
Immersed electrodes steam humidifier
• Available in various sizes
• Automatic modulating control
• With automatic drain for inactivity
CLIVETPack2 29
More flexibility on air distribution
CLIVETPack2 30
Roofcurb for supply and return on downflow
Simplify the connection to the ducts
and the roof insulation
Adjustable to adapt roof slope
CLIVETPack2 31
Smart electronic control
• Management by microprocessor
• Control development from Clivet
• Remote control is a standard
• Easy to use by not specialized personnel
• Communication protocol: ModBus, Lonworks, BACnet-IP
• Supervisor: Clivet Master System
CLIVETPack2 32
The rooftop range with water source
Wide range of market reference
Ready for WLHP and Geothermal applications Geotermici
Thermodynamic heat recovery available
Specific options (strainer = kit) for water source:
• Hydraulic package for costant water flow
• Hydraulic package for variable water flow
• Hydraulic package for well water
CLIVETPack2 33
CLIVETPack2
High Attendance application
CLIVETPack2 34
The HIGH ATTENDANCE range
Wherever:
• High attendance is the driver (people/sqm)
• It means High fresh air volume (and higher capacity!)
Main applications:
• Cinema
• Theatres
• Restaurants
• Meeting rooms
• Leisure / Disco / Casino
CLIVETPack2 35
CLIVETPACK XHE
The HIGH ATTENDANCE range
Main figures:
CSNX-XHE units, air-to-air heat pump with built-in heat recovery
More than 1.000 units sold
Up to 80% fresh air management
Refrigerant circuit larger than MID ATTENDANCE units
Further options for the specific application
CLIVETPack2 36
The HIGH ATTENDANCE range
Main CSNX-XHE individual standard features:
• Airflow control as standard
Other CSNX-XHE individual optional features:
• Hot-gas reheating for summer humidity control
• Silencers on the return side
• IAQ management (variable fresh air) by either CO2 or VOC control
• Electric heaters / Hot water coil (below –5°C ambient)
• Steam humidification
• Modbus RS485 gateway
CLIVETPack2 37
CLIVETPack2
Full Fresh Air application
CLIVETPack2 38
The FULL FRESH AIR range
Some specific applications need full fresh air HVAC:
• Commercial and Industrial kitchens
• To balance the hood exhaust
• Projection rooms in Multiplex cinemas
• To balance the cooling exhaust fans on projectors
• Smoking rooms and Chemical laboratories
CLIVETPack2 39
The FULL FRESH AIR range
CLIVETPACK2 FFA is the solution:
• Industrialised
• Based on the Heat pump technology, 100% fresh air
• Highly efficient, to reduce running cost and CO2 footprint
• Available in Supply only / Supply and Exhaust versions
Versione per sola immissione Versione per immissione ed espulsione
SUPPLY
ONLY
SUPPLY
AND EXHAUST
CLIVETPack2 40
3
2
1
4
5
67
S
FA
8
CBFFA configuration with air supply only
1. Filtration G4 + F7 or
Electronic
2. Heating with water coil or
electric heaters
3. Exchanger for air handling
4. Hot gas post-heating
5. Supply fan section
6. External exchanger
7. Electrical panel
8. External fan section
FA = fresh air
S = supply air
CLIVETPack2 41
3
2
1
4
5
67
S
FA
EX
EX
8
9 R
CCFFA configuration with air supply and air extraction
1. Filtration G4 + F7 or
Electronic
2. Heating with water coil or
electric heaters
3. Exchanger for air handling
4. Hot gas post-heating
5. Supply fan section
6. External exchanger
7. Electrical panel
8. External fan section
9. Exhaust fan section
FA = fresh air
S = supply air
R = return air
EX = exhaust air
CLIVETPack2 42
Functional features
• Two indipendent refrigeration circuit
• Variable capacity with Digital scroll and on/off compressors (sizes 12.2-
16.2); Tandem Scroll compressors (gr. 20.4-24.4) for seasonal high
efficiency
• Radial plug fan with EC brushless motor
• Electronic expansion valve (EEV)
• Microprocessor management, time scheduling and set point
CLIVETPack2 43
High compactness
CLIVETPack2 FFA - DF15M002I--00
Supply fans
Electrical panel
Filters and air handling
section
External
exchangers
Fresh air damper
Tandem
Compressors
Expulsion fans
External axial fans
CLIVETPack2 44
CLIVET S.p.A.
Via Camp Lonc 25
32032 Feltre, Belluno
ITALY
Tel. + 39 0439 3131
Fax + 39 0439 313300
www.clivet.com