prodex total insulation - inicio ad5- ad10 ingles.pdfthe ideal insulation solution our products: w...

The Ideal Insulation Solution

Our products:

NEW

PRODEX AD5 THERMALINSULATION


PRODEX TOTAL INSULATION

Product Characteristics:


Environmental Characteristics:

Re�ects 97% of the radiant heatRepels the heat in warm climateRetains heat in cold areasAllows obtaining energetic saving up to 55%with the use of air-conditioningReduces noise from the falling rainProduct of 100% close cell what allows to be:impermeable, hygienic, and resistant toagro-chemicals, acids, bases, oils and coverings

Our products are free from toxic gasWe do not harm the ozone layerAll product are environmental frendlyDo no develop allegiesWe are members of the united green building CouncilOur packing is made with




Increse R Value, add longitudinal strength, get better installation �nish with our new thermal meld system.

Increse R Value, add longitudinal strength, get better installation �nish with our new thermal meld system.

Radiant barrier, Thermalbreak and Vapor BarrierRadiant barrier, Thermalbreak and Vapor Barrier

This insulation product reduces heating and cooling costs. Re�ective aluminum foil on each side of a 5mm closed-cell polyethylene foam center. Ideal for hot and cold climates.

This insulation product reduces heating and cooling costs. Re�ective aluminum foil on each side of a 10mm closed-cell polyethylene foam center. Ideal for hot and cold climates.

10 mm

AD10

5 mm

AD5

Nominal Thickness:5mm (+ or – 0.5 mm)

Nominal Thickness:10mm (+ or – 0.5 mm)

INSULATION LAYERSAluminium Foil

polyethylene backing Closed-cell Polyethylene foam

polyethylene backing Aluminium Foil

INSULATION LAYERSAluminium Foil

polyethylene backing Closed-cell Polyethylene foam

polyethylene backing Aluminium Foil

NEW


PRODEX AD5 THERMAL INSULATION

INSULATOR AD (double aluminium face - barrier against �re)

3. CHARACTERISTICS OF THE PRODUCTCHARACTERISTICS

STRUCTURE OF THE FOAM CELLAVERAGE WEICHT OF M2DENSITY OF THE INSULATORPERMEABILITYPERMEABILITY TO THE WATER STEAMFLAME RATESMOKE DEVELOPMENTEMITTANCERESISTANCE TO FUNGUSDELAMINATIONOPERATION TEMPERATURETHERMIC RESISTANCE (factor R, hent �or down)BARK ADHESION (fast action)TOTAL THICKNESS OF FAST ACTIONADHESION CAPACITY (fast action)INITIAL STICKING LENGHT (fast action)

Closed0,242kg/m²20-30 kg/m3Impermeable0.033 g/m2hkPa - 0.05 perms (gr/ft²*h*in.hg)0150.03Resistant / Does not promote the growth of fungus – moldDoes not delaminate- 20ºc / 80ºc 15.67 ft2h°f/Btu1,33-1,31 kg/inch0,095 mm24 hr/in²1,5 cm>

Closed0,242kg/m²20-30 kg/m3Impermeable0.033 g/m2hkPa - 0.05 perms (gr/ft²*h*in.hg)0150.03Resistant / Does not promote the growth of fungus – moldDoes not delaminate- 20ºc / 80ºc 21.36 ft2h°f/Btu1,33-1,31 kg/inch0,095 mm24 hr/in²1,5 cm>

- - ASTM 1622 Dir. UEAtc ASTM E 96/IRAM 1735 ASTM E-84 ASTM E-84 ASTM C-1371-98 ASTM C 1338 ASTM C-1224-99 ASTM C-1258 ASTM C-236ASTM D-1000ASTM D-1000PSTC-7PSTC-6

1-PRODUCT

2. MEASUREMENTS AND TOLERANCES OF THE STANDARD PRODUCT

VALUE NORM

THICKNESS 5 ± 0.35 (mm) WIDTH: 1.22 ± 0.01 (m)LENGHT ± 30 cm

Technical speci�cations

PRODEX AD10 THERMAL INSULATION

INSULATOR AD (double aluminium face - barrier against �re)

3. CHARACTERISTICS OF THE PRODUCTCHARACTERISTICS

STRUCTURE OF THE FOAM CELLAVERAGE WEICHT OF M2DENSITY OF THE INSULATORPERMEABILITYPERMEABILITY TO THE WATER STEAMFLAME RATESMOKE DEVELOPMENTEMITTANCERESISTANCE TO FUNGUSDELAMINATIONOPERATION TEMPERATURETHERMIC RESISTANCE (factor R, hent �or down)BARK ADHESION (fast action)TOTAL THICKNESS OF FAST ACTIONADHESION CAPACITY (fast action)INITIAL STICKING LENGHT (fast action)

- - ASTM 1622 Dir. UEAtc ASTM E 96/IRAM 1735 ASTM E-84 ASTM E-84 ASTM C-1371-98 ASTM C 1338 ASTM C-1224-99 ASTM C-1258 ASTM C-236ASTM D-1000ASTM D-1000PSTC-7PSTC-6

1-PRODUCT

2. MEASUREMENTS AND TOLERANCES OF THE STANDARD PRODUCT

VALUE NORM

THICKNESS 10 ± 0.70 (mm) WIDTH: 1.22 ± 0.01 (m)LENGHT ± 30 cm

Technical speci�cations


Our re�ective insulations are used in:

Homes, Metal buildings, Pole barns Commercial buildings

Applications include:

Prodex Total is the recommended product for these applications. It represents 81% of our sales, receives the highest customer reviews and most stringent testing.

Prodex Total is the recommended product for these applications. It represents 81% of our sales, receives the highest customer reviews and most stringent testing.

RoofAtticCeilingWallGarageCrawlspaceFloorDuctworkUnder-concrete...


MAIN ADDED VALUES

BEST METAL BUILDING INSULATION!

Improve the tearing resistanceGet a constant R ValueReduce condensation riskThermal weld overlap

1.THERMAL WELDING METHOD2.VAPOR BARRIER 3.ONE LAYER R VALUES AT DIFERENT TEMPERATURES4.RESISTANCE TO GROWD OF FUNGI

The AD10 insulation is our higher quality product,It allows you to get the best installation look

The AD10 insulation is our higher quality product,It allows you to get the best installation look

PRODEX AD10 THERMAL INSULATION NEW


1.Thermal Welding Method

Prodex AD 10 material has cuts at the edge to overlap the rolls, a hot air gun is apply this melts the polyethylene foam at both rolls, then a little hand pressure is require to complete the welding process. Thermal welding allows Prodex AD 10 to get a totally impermeable overlapping and mechanical seal between installed rolls


3. One layer R Values at diferent temperatures

R value AD 10 Air chamber (in) Foam thickness (mm) Foam R value ft2 h°F/Btu

Rafter tem (˚F) ft2 h °F/Btu 3.5 10 1.7600176

-25 25.5600176

0 24.5100176

25 23.1100176

50 22.4100176

75 21.3600176

100 20.6600176

125 19.9600176


4. Resistance to growd of fungi

Asperillus nigerAspergillus �avus.Aspergillus versicolor.Penicillium funiculosum.Chaetomium globosum.

Prodex re�ective insulation has been tested for resistance to the growd of fungi in accordance with the ASTM C 1338.

Against all the followin fungal spices:


InstallationABOVE RAFTERS INSTALLATION

Set the Prodex AD 10 at the eaves and unroll parallel to the eaves.As the Prodex AD 10 is unrolled across rafters �xit using nails or staples of at least ½ “ length.The next roll must overlap the preceding layer by using our Thermal welding system this will guide the roll and seal the overlap along the entire length.

Prodex Ad 10 should be permanently �xed in place by using wooden battens parallel to the rafters, held in place with nails.When the top layer has been battened, any excess material may be cut by running a sharp knife along the edge of the batten.As soon the Prodex AD 10 is set and tight, roof installation can take place as a normal procedure.



INSTALLATION METHOD R 22

INSTALLATION METHOD R 30

Air chamber #1

Air chamber #2So�t

Ad10

Ad10Roof cover

Battens

AD10

Rafter

Roof coverBattens

Air chamber2.6”





U.S

.GREEN BUILDING CO

UN

CIL

U S G B C

Best InsulationLowest PriceFastest Delivery

ENVIROMENTAL MANAGEMENT SYSTEMS CERTIFICATION

prodex total insulation - inicio ad5- ad10 ingles.pdfthe ideal insulation solution our products: w...

Documents