produc tsheet blowerproof - partel fiche_bplb... · 2018. 6. 6. · resistance to fatigue movement...
TRANSCRIPT
-
Distributed by Partel – [email protected] – www.partel.com - 888 487 1012
APPLY WITH
CERTIFICATE 18/550 5
DESCRIPTION & USE
BLOWERPROOF LIQUID BRUSH is a VOC free, polymer based paste that is applied with a paintbrush
OTHER POSSIBLE USES » » Curtain walls »
APPLICATION METHOD
PREPARATION » »polyurethane foam.
»is allowed.
APPLICATION » » Apply with a fl at paintbrush suitable for water-based paints, in one or two passes. Ensure complete coverage and minimum layer thickness of 0,5 kg/m² (~500micron). Check layer thickness with wet fi lm gauge.
» Clean tools with water. » » Complete drying is required prior to applying another product on BLOWERPROOF LIQUID BRUSH
»
FLOOR/WALL CONNECTION WALL/CEILING CONNECTION WINDOW/WALL CONNECTION PIPE PENETRATION
BRUSHBLOWERPROOF
LIQUIDLIQUIDBLOWERPROOF
PRODUCTSHEET
paintbrush
-
CHARACTERISTICS
TEST INSTITUTE TEST NORM VALUE
EN ISO 12572 (2001) µ = 35967
thickness) (calcul ated values)
Resistance to fatigue movement EO TR008:2004 No cracking or delamination
Elongation BS EN ISO 527-3 264% ( avarage value)
262.7% ( avarage value)Elongation after ageing BS EN ISO 527-3
Flame propagationFire reaction
EN ISO 11925 Passed
Zero VOC (VOC, TVOC, carcinogenics,ammonia, formaldehyde)
EN ISO 16000-9/6EN 717-1EN ISO 16000-28
Free of VOC, TVOC, carcinogenics , ammonia, formaldehyde.
Adhesion on red brick (dry) ISO4624 (2002) 1,9 N/mm² (v)
Adhesion on red brick (moist) ISO4624 (2002) 2,5 N/mm² (v)
Adhesion on concrete brick (dry) ISO4624 (2002) 2,7 N /mm² (v)
Adhesion on concrete brick (moist) ISO4624 (2002) 2,5 N /mm² (v)
Adhesion on Ytong (dry) ISO4624 (2002) Adhesion value exceeding substrate strength: breakingof ytong during adhesion test at 0.44 N/mm² (v);
Adhesion on Ytong (moist) ISO4624 (2002) Adhesion value exceeding substrate strenght: breakingof ytong during adhesion test at 0,44 N /mm² (v);
Adhesion on PVC window profile ISO4624 (2002) 1,5 N /mm² (v)
Adhesion on PVC window profile (smooth) ISO4624 (2002) 0,83 N /mm² (v)
Adhesion on aluminium window profile ISO4624 (2002) 2,5 N /mm² (v)
Adhesion on EPDM (« T ridex ») ISO4624 (2002) 1,5 N /mm² (v)
Adhesion on roofing ISO4624 (2002) Adhesion value exceeding substrate strenght: breaking
Adhesion value exceeding substrate strenght: breaking
of roofing during adhesion test at 0.4 N/mm² (v);
Adhesion of plaster (knauf) on Blowerproof ISO4624 (2002) of plaster during adhesion test at 0.81 N/mm² (v);
UNIVERSITY OF GHENT (BELGIUM)
Airtightness floor/wall after ageing NBN EN 12114:2000Eurocode 7
0,05 M³/H.M (50BAR) (V)
ADITIONAL TESTREPORTS
BCB
BCB
BCB
BCB
OTHER CHARACTERISTICS
»
» Density: +/- 1,15 kg / litre
» Available colours:
»
»original unopened packaging.
PACKAGING
» 5.75L pails – pallet : 60 x 5.75L
SAFETY
DATE OF THIS EDITION: 05/22/2018
Our general conditions of sale apply. This document does not have a contractual value. This technical data sheet replaces and annuls the previous edition. The information given in this sheet has the purpose to inform and advise you. Partel Inc reserve the right to amend or change this informa�on without notice. All information is given in good faith and without any warranty. The application, use and processing of these products are beyond our control and therefore the entire responsibility of the user/client/applicator. The user of the productmust test the product’s suitability and apply for the intended purpose. Established liability if any for any reason is always limited to the value of the goods supplied by Partel Inc.The products and systems are manufactured under total quality management. Partel Inc reserves the right to change the properties of its products. Users must always refer to the most recent issue of the local Product Data Sheet, copies of which will be supplied on request.
1L= 19 sqft (consumption up to 2L/sqft depending on substrate
41˚-68˚F
Perm Vapour permeance ASTM E96 0.12 - 0.24
SD Vapor Variability range EN 1931 0.8 - 21.7
Damp diffusion resistance factor
Distributed by Partel - [email protected] - www.partel.com - 888 487 1012