product binder registration - .product binder registration please register your binder(s) so we can

Download Product Binder Registration - .Product Binder Registration Please register your binder(s) so we can

Post on 29-Aug-2018

217 views

Category:

Documents

2 download

Embed Size (px)

TRANSCRIPT

  • Product Binder Registration

    Please register your binder(s) so we can keep you updated with new products, general information and technical innovations on Metro roof products and accessories.

    COMPANY _____________________________________________________

    YOUR NAME: _____________________________________________________

    POSITION: _____________________________________________________

    ADDRESS: _____________________________________________________

    _____________________________________________________

    _____________________________________________________

    PHONE NO.: _______________________ FAX NO.: _____________________

    E-MAIL: _____________________________________________________

    BUSINESS TYPE: CONTRACTOR DISTRIBUTOR ARCHITECT CONSULTANT

    NO OF BINDERS TO REGISTER __________

    Fax or E-Mail your registration to:

    Metro Roof Products Attention Binder Registration

    FX: (760) 435-1162 www.smartroofs.com

    Metro Roof Products Iss.:6/26/2001 Rev.11/1/2002 3093 Industry Street, Oceanside CA 92054 PH: (760) 435-9842 E-Mail: info@metroroofproducts.com

  • Discover the Benefits of aStone-Coated Steel Roof!

    50-Year Limited Product & 25-YearAppearance WarrantyUnlimited transfers & a lengthy appearancewarranty.

    High Wind ResistanceTested to uplift forces equivalent to 150-mph.

    Hail Impact ProtectionClass 4 - The highest UL 2218 rating forhail impact.

    Lightweight & StrongLightweight (1.4 lbs/sq.ft.) interlocking roofsystem, with batten grid can provide shearstrength equal to 1/2" plywood.

    3093 A Industry Street, Oceanside, California USA 92054Toll Free: 1-866-METRO-4U (638-7648)Tel: 760-435-9842 Fax: 760-435-1162

    www.smartroofs.com

    Smart Roofs for Smart People.TM

    Class "A" Fire RatedMeets the strictest fire codes across thecountry.

  • .

    HIS

    TO

    RY

    HISTORY

  • WhyMETROtheRealStory122410.doc

    Metro Roof Products 3093 A Industry Street Oceanside CA 92054 Tel: (760) 435-9842 Fax: (760) 435-1162

    Metro Roof Products:

    Metros latest manufacturing facility was commissioned in 1999, in Oceanside, California and was in full production by early 2000. Since that time Metro has grown to one of the leading manufacturers of pressed steel products for the roofing industry in the USA and Canada. We are committed to building a market-leading organization through superior products that offer innovative solutions to residential roof construction. Our technical focus and unique designs have helped propel the company to its leadership position in many markets.

    These new products have been developed in part by listening to local contractors and by a rigorous design & development process within Metro.

    Key milestones achieved are, FIRST to bring a Concealed fastener, Direct-to-deck stone-coated SHINGLE to market 1997 FIRST to offer Rake Channels with an integrated Locator-lip making installation easy with added weather protection 2000 FIRST to bring a Nail-On battenless Direct-to-deck stone-coated SHAKE-II to market 2002 FIRST to bring a Fully integrated stone-coated roof vent Metro SMARTvent panel to market 2003 FIRST to offer the SMARTjack a multi-size stone-coated vent flashing for pipe penetrations 2004 FIRST to offer the SMART-Sleeve a multi-size Pipe-Cover thats stone-coated to match the Metro roof - 2005

    In keeping with Metros theme we are pursuing development of exciting new styles and accessories that will keep Metro at the head of the line in this unique roofing industry.

    Smart Roofs for Smart People

    Metro Roof Products USA Factory

  • FAQs

    Frequently asked questions about Stone-Coated Steel

    METRO FAQ's Page 1 of 2 Iss: 6-1-01 REV: 6/3/2006

    Metro Roof Products 3093 A Industry Street Oceanside CA 92054 Toll Free: (866) METRO-4U Tel: (760) 435-9842 Fax: ORDERS (760) 435-1162 Fax: GENERAL (760 435-9412

    1. How long has Stone-Coated Steel roofing been around? Stone-coated steel roofing occurred during World War II when tar and sand were used to cover galvanized steel bunkers. After the war, the practice was commercialized and the first roofs were produced. Stone coated steel roofs have been protecting buildings for close to 50 years, but the product technology today bears little resemblance to early practices due to advances in the chemistry of coatings.

    2. Will a Steel roof make my home hot?

    No. A properly vented steel roof system moves air both between the shingles and the underlying deck as well as moving air from vents under the decking. Heated air is allowed to dissipate through the ridgeline as cooler is drawn through eave vents. Reduced energy bills can result from airflow both under and over the decking.

    3. Can you walk on a steel roof?

    Yes. Some care must be exercised while walking on the roof, but note that roofers walk all over the shingles during the installation process.

    4. Is a steel roof noisy in the rain? The Metro roofing system is quiet. The combination of dead air space and the stone coating minimize outside sounds. One rural couple standing directly under a stone coated steel roof observed that they could hear the rain striking a metal building about 50 feet from where they were standing, but couldnt hear any noise from the stone/steel roof directly over their heads.

    5. How wind resistant is a steel roof?

    The Metro roofing system has been proven to resist wind speeds in excess of 120-mph. One homeowners roof survived tornado force winds completely intact. We lost 12 large treesthe shingled roof of our garagea 14 X 14 (2 X 6) pump house deck slammed into the house and buckled the brick. You said it would hold up in a tornado. Im writing to tell you it will. Bill Jamieson

    6. How do the granules stay bonded to the steel?

    Specially graded Non-Oiled granite stone chips, produced by ISP Corporation are used for all Metro stone-coated products. The stone granules are embedded in a UV resistant acrylic polymer for a lasting bond to the steel substrate.

    7. Will a steel roof rust? The steel substrate is protected from corrosion by layers of metallic and polymer coatings. Metro utilizes an advanced metal composite developed by BIEC International and introduced in 1973 as aluminum-zinc coated steel. The composite improved earlier metallic coatings by applying an aluminum-zinc alloy to the steel in a continuous hot dip process. The aluminum creates an inert barrier coat while enhancing the long-term performance of zinc and its ability to protect breaks in the coating.

    Galvalume coated steel has repeatedly been shown in industry studies, conducted over the last 20 years, to outperform the corrosion resistance of other coated metals. This is why the Metro roof system is referred to as The final Roofing System, and is backed up with a 50 year limited warranty.

  • FAQs

    Frequently asked questions about Stone-Coated Steel

    METRO FAQ's Page 2 of 2

    Metro Roof Products 3093 A Industry Street Oceanside CA 92054 Toll Free: (866) METRO-4U Tel: (760) 435-9842 Fax: ORDERS (760) 435-1162 Fax: GENERAL (760 435-9412

    8. Does the color fade? Though sized more precisely, Metro uses the same stone granules used by asphalt shingle manufacturers for over 50 years, so history demonstrates that fading is not a problem. Over time, a slight change in color may occur due to settling of airborne contaminants, however periodic rain or washing the roof with a garden hose will keep the roof looking new.

    9. Is a steel roof fire safe? Steel roofing is classified as a noncombustible roofing material (Class A). In new construction and in many re-roofing applications the metal roofing system is a Class A noncombustible roof assembly. In roof-over applications, where Metro panels are installed over old combustible shakes or shingles, the resulting roof assembly can be classified as A, B, or C depending upon the type of underlayment installed between the old and new roof.

    There are many examples of the safe fire performance of stone-coated steel roofs in areas subjected to fire storms. Additionally, the lightweight strength of the steel roofing system precludes it from crashing down on occupants exposed to fire within their residence.

    10. How long does it take to install a steel roof? Usually only a few days. The complexity of the buildings roofscape is the primary factor in determining the time required. Complex roofs require more time than basic designs.

    11. What is the installed weight of a steel roof in comparison to other products?

    PRODUCT WGT. PER SQ. (1-Sq. = 100 Sq.ft)

    Steel Roofing 125 lbs.

    Standard (3-Tab) Asphalt Shingles 190 215 lbs.

    Wood Shake/Shingle* 250 300 lbs.*

    Heavy Weight Laminated Asphalt Shingles 290 430 lbs.

    Clay / Concrete Tiles* 900 1200 lbs.* *Note that the weights for cedar, clay and concrete products are all dry weights. All three-product categories weights increase when wet.

    12. What does hail do to steel roofs? Metro panels received the highest impact resistance rating from Underwriters Laboratories. Except under the most extreme storms, Metro panels show no visible effects from impacting hail stones. Some insurance carriers extend a discount on premiums to homeowners that have a Metro roof.

    13. Are steel roofs more susceptible to lightning strikes?

    Steel roofing is no more susceptible to lightning than other roofing materials. It has been demonstrated that lightning strikes most frequently the highest points of terrain. Where concerns exist, lightning rods can be installed on roofs t

Recommended

View more >