product catalog - straumann · even more simply doing more than you expect patients are expecting...

Product Catalog2016

Straumann International Edition

NoteA list of abbreviations can be found on the reverse of this fold-out page.

-04 Pack of 4

ABS Acrylonitrile butadiene styrene

Al Aluminum

BL Bone Level

EDTA Ethylenediaminetetraacetic acid

EMD Enamel matrix derivative

LDPE Low-density polyethylene

MO 0 Medium Opacity 0

MO 1 Medium Opacity 1

NC Narrow CrossFit® = implant diameter 3.3 mm, BL implants

NN Narrow Neck = implant shoulder diameter 3.5 mm, SP implants

NNC Narrow Neck CrossFit® = implant shoulder diameter 3.5 mm, SP implants

PA Polyamide

PC Polycarbonate

PEEK Polyetheretherketone

PMMA Polymethylmethacrylate

POM Polyoxymethylene

PPS Polyphenylene sulfide

PS Polystyrene

PSU Polysulfone

RC Regular CrossFit® = implant diameter 4.1 and 4.8 mm, BL implants

RN Regular Neck = implant shoulder diameter 4.8 mm, S/SP/TE implants

S Standard

SCS Screw Carrying System

SP Standard Plus

TAN Titanium-aluminum-niobium alloy

TAV Titanium-aluminum-vanadium alloy

TE Tapered Effect

Ti Titanium

TiN Titanium nitride

TiZr Titanium-zirconium alloy (Roxolid®)

V2 Pack of 2

V4 Pack of 4

V20 Pack of 20

WN Wide Neck = implant shoulder diameter 6.5 mm, S/SP/TE implants

ZrO2 Zirconium dioxide

List of abbreviations

Valid from January 01, 2016, until publication of the new catalog.

Trademarksbonebuilder®, cerabone®, collacone®, collprotect®, Jason®, mucoderm®, maxgraft®, maxresorb® are registered trademarks of botiss Medical AG, Germany. Ceramicor®, Dalbo®-Rotex® Matrix, Elitor®, Esteticor® and Pekkton® are registered trademarks of Cendres & Métaux SA, Switzerland.CEREC® is a registered trademark of Sirona Dental Systems GmbH, Germany.Cronidur® 30 is a registered trademark of Energietechnik Essen GmbH, Germany.Dolder® is a registered trademark of Prof. Eugen Dolder, exclusively licensed to Cendres + Metaux Holding SA, Switzerland.IPS e.max® is a registered trademark of Ivoclar Vivadent AG, Liechtenstein.LOCATOR® is a registered trademark of Zest IP Holdings LLC, USA.VITA CAD-Temp® is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Germany.

Even more simply doing more than you expect

Patients are expecting more and more from their dentists. Every patient is different, and every treatment is individual. Straumann stands for variety and innovation. This means that we offer the perfect component for each and every specific case, while a constant growth in new total solutions en-sures that you benefit from less complexity and a simplified and more effi-cient working process. This ensures that you are equipped to face the grow-ing demands on you and your practice.

“Simply doing more” is also reflected in our new product catalog. And “more” is definitely what it has to offer – more structure and more color, making it easier to navigate and allowing you to select suitable products for each avail-able indication. The individual areas are set up based on clear and logical criteria, with our trusted system overviews which are, as always, enclosed.

Bear in mind, too, that Straumann original components also offer “more” in terms of safety for you and your patients. We know everything there is to know about our products, down to the smallest detail. The design of our implant and prosthetic components is therefore fine-tuned with millimeter precision.

I would like to draw your attention to two new products in particular: We have designed the new Straumann® Bone Level Tapered Implant to do no less than set a new gold standard for conical implants. And Biomaterials@Straumann® now offers a unique and diverse portfolio of regenerative prod-ucts from Straumann and botiss – because only having one option is not enough.

And don’t forget: All our products are available 24/7 in our convenient and modern Straumann® eShop, featuring all the flexibility and benefits eCom-merce has to offer.

Sincerely

Marco GadolaChief Executive Officer

6

Product Catalog Highlights

The demand for metal-free implant treatments is constantly rising among patients. The Straumann® PURE Ceramic Implant (monotype) offers a unique esthetic solution for the treatment of patients with special requirements. Available in diameters of 3.3 mm and 4.1 mm.

With the new Straumann® Bone Level Tapered Implant, high primary stability and efficacy is ensured due to the combina-tion of an apical conical design, Roxolid® material and the SLAc-tive® surface.

The Straumann® Standard Plus Short Implant with a length of 4 mm is our shortest implant. It is especially suitable for pa-tients with a low vertical bone volume and allows treatment without complex vertical bone restructuring.

The Straumann® Variobase® Abutment is a strong base for a high degree of flexibility. The new screw-retained abutments (straight and angled) for Straumann® Bone Level Implants open up a range of new treatment options.

The Biomaterials@Straumann® portfolio features a unique range of regenerative solutions to support implant and peri-odontal procedures. This continuously growing product range allows for flexible and reliable treatment of soft and hard tis-sue defects with the function and esthetic results patients are now demanding.*

* Straumann supplies a range of regenerative products and those of botiss biomaterials GmbH in D-15806 Zossen in selected countries under the name “Biomaterials@Strau-mann®”. Please contact your local Straumann sales representative for further information.

7

Product Catalog Highlights

The demand for metal-free implant treatments is constantly rising among patients. The Straumann® PURE Ceramic Implant (monotype) offers a unique esthetic solution for the treatment of patients with special requirements. Available in diameters of 3.3 mm and 4.1 mm.

With the new Straumann® Bone Level Tapered Implant, high primary stability and efficacy is ensured due to the combina-tion of an apical conical design, Roxolid® material and the SLAc-tive® surface.

The Straumann® Standard Plus Short Implant with a length of 4 mm is our shortest implant. It is especially suitable for pa-tients with a low vertical bone volume and allows treatment without complex vertical bone restructuring.

The Straumann® Variobase® Abutment is a strong base for a high degree of flexibility. The new screw-retained abutments (straight and angled) for Straumann® Bone Level Implants open up a range of new treatment options.

The Biomaterials@Straumann® portfolio features a unique range of regenerative solutions to support implant and peri-odontal procedures. This continuously growing product range allows for flexible and reliable treatment of soft and hard tis-sue defects with the function and esthetic results patients are now demanding.*

* Straumann supplies a range of regenerative products and those of botiss biomaterials GmbH in D-15806 Zossen in selected countries under the name “Biomaterials@Strau-mann®”. Please contact your local Straumann sales representative for further information.

Table of Contents

Surg

ery

Surgery 9Implants Overview 10

Explanation of Color Coding 15

Tissue Level Implants 17

Bone Level Implants 27

Straumann® PURE Ceramic Implants 35

TempImplants 41

Pros

thet

ics

Prosthetics 45Tissue Level NNC 47

Tissue Level RN 57

Tissue Level WN 77

Bone Level NC 93

Bone Level RC 113

Straumann® Classic 137

Biom

ater

ials

Biomaterials 145Bone Substitutes 146

Collagen Products 150

Biologics 153

Instruments 154

CAD

CAM

CADCAM 157CADCAM 158

Inst

rum

ents

and

Ac

cess

orie

s

Instruments and Accessories 163Surgery 164

Prosthetics 184

Info

rmat

ion

and

Inde

x

Information and Index 195The Straumann® eShop 196

The Straumann Guarantee 197

Important Information 198

Material Information 199

Index 202

8

When searching the "Implants" chapter, first select the type of im-plant – Tissue Level, Bone Level or Ceramic. Then specify the desired implant diameter.These are marked by colored rec-tangles on the side tabs of each page. Instruments and accessories can be found in the corresponding chapter.

More than just an implant: a sense of trust

Every patient is different, every treatment is individualized – Straumann reflects this individuality in its implant products. Whether you choose a Soft Tissue Level, Bone Level or Ceramic implant, all implants of-fer you, the dentist, a wide range of options, simple handling, reliability and safety.

Simplicity as guiding principle – with the Straumann® Dental Implant System, you can cover a wide range of treatment options.

• A system including Soft Tissue Level and Bone Level Implants to offer maximum choice• SLActive® and SLA® surface technologies for reliable predictability of treatment results• Choice of Ceramic and Roxolid® – Roxolid® was developed by Straumann specifically for use in implant

dentistry and improves safety• More than 15 million Straumann implants have been implanted worldwide

9

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Surgery

Implants Overview 10

Explanation of Color Coding 15

Tissue Level Implants 17Implants ∅ 3.3 mm 18

Implants 18

Closure Caps and Healing Caps 20

Implants ∅ 4.1 mm 21

Implants 21



Implants 24


Bone Level Implants 27Implants ∅ 3.3 mm 28

Implants 28

Closure Caps and Healing Abutments 29


Implants 30



Implants 32


Straumann® PURE Ceramic Implants 35Implants ∅ 3.3 mm 36

Implants 36

Components 37


Implants 38

Components 39

TempImplants 41Implants and Accessories 42

10

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Implants Overview

Roxolid® SLActive® ImplantsRoxolid® SLActive® Implants

Standard Implants RN RN RN WN

∅ 4.8 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm ∅ 4.8 mm

SLActive® S ∅ 3.3 RN S ∅ 4.1 RN S ∅ 4.8 RN S ∅ 4.8 WN

6 mm8 mm10 mm12 mm14 mm16 mm

–033.501S033.502S033.503S033.504S033.505S

033.530S033.531S033.532S033.533S033.534S033.535S

033. 580S033. 581S033. 582S033. 583S033. 584S

–

033.600S033.601S033.602S033.603S

––

Standard Plus Implants NNC RN RN RN WN

∅ 3.5 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm ∅ 4.8 mm

SLActive® SP ∅ 3.3 NNC SP ∅ 3.3 RN SP ∅ 4.1 RN SP ∅ 4.8 RN SP ∅ 4.8 WN


––

033.416S033.417S033.418S033.419S

––

033.511S033.512S033.513S033.514S

033.043S033.560S033.561S033.562S033.563S033.564S

033.044S033.590S033.591S033.592S033.593S033.594S

033.045S033.610S033.611S033.612S033.613S

–

Tapered Effect Implants RN RN WN

∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLActive® TE ∅ 3.3 RN TE ∅ 4.1 RN TE ∅ 4.8 WN

8 mm10 mm12 mm14 mm

033. 521S033. 522S033. 523S033. 524S

033. 571S033. 572S033. 573S033. 574S

–033.622S033.623S033.624S

NNC = Narrow Neck CrossFit®, RN = Regular Neck, S = Standard, SP = Standard Plus, TE = Tapered Effect, WN = Wide Neck

2.8 mm

1.8 mm

1.8 mm

11

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Implants Overview

Roxolid® SLActive® ImplantsRoxolid® SLActive® Implants

Bone Level Implants NC RC RC

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLActive® BL ∅ 3.3 NC BL ∅ 4.1 RC BL ∅ 4.8 RC

8 mm10 mm12 mm14 mm

021.2308021.2310021.2312021.2314

021.4308021.4310021.4312021.4314

021.6308021.6310021.6312021.6314

Bone Level Tapered Implants NC RC RC

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLActive® BLT ∅ 3.3 NC BLT ∅ 4.1 RC BLT ∅ 4.8 RC

8 mm10 mm12 mm14 mm16 mm

021.3308021.3310021.3312021.3314021.3316

021.5308021.5310021.5312021.5314021.5316

021.7308021.7310021.7312021.7314 021.7316

BL = Bone Level, BLT = Bone Level Tapered, NC = Narrow CrossFit®, RC = Regular CrossFit®

12

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Implants Overview

Roxolid® SLA® ImplantsRoxolid® SLA® Implants

Standard Implants RN RN RN WN

∅ 4.8 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm ∅ 4.8 mm

SLA® S ∅ 3.3 RN S ∅ 4.1 RN S ∅ 4.8 RN S ∅ 4.8 WN


–043.255S043.256S043.257S043.258S043.259S

043.155S043.156S043.157S043.158S043.159S043.160S

043.061S043.062S043.063S043.064S043.065S

–

043.606S043.607S043.608S043.609S

––

Standard Plus Implants NNC RN RN RN WN

∅ 3.5 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm ∅ 4.8 mm

SLA® SP ∅ 3.3 NNC SP ∅ 3.3 RN SP ∅ 4.1 RN SP ∅ 4.8 RN SP ∅ 4.8 WN


–043.416S043.417S043.418S043.419S

–043.260S043.261S043.262S043.263S

043.161S043.162S043.163S043.164S043.165S

043.066S043.067S043.068S043.069S043.070S

043.655S043.656S043.657S043.658S

–

Tapered Effect Implants RN RN WN

∅ 4.8 mm ∅ 4.8 mm ∅ 6.5 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLA® TE ∅ 3.3 RN TE ∅ 4.1 RN TE ∅ 4.8 WN

8 mm10 mm12 mm14 mm

043.264S043.265S043.266S043.267S

043.166S043.167S043.168S043.169S

–043.660S043.661S043.662S

NNC = Narrow Neck CrossFit®, RN = Regular Neck, S = Standard, SP = Standard Plus, TE = Tapered Effect, WN = Wide Neck

2.8 mm

1.8 mm

1.8 mm

13

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Implants Overview

Roxolid® SLA® ImplantsRoxolid® SLA® Implants

Bone Level Implants NC RC RC

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLA® BL ∅ 3.3 NC BL ∅ 4.1 RC BL ∅ 4.8 RC

8 mm10 mm12 mm14 mm

021.2508021.2510021.2512021.2514

021.4508021.4510021.4512021.4514

021.6508021.6510021.6512021.6514

BL = Bone Level, BLT = Bone Level Tapered, NC = Narrow CrossFit®, RC = Regular CrossFit®

Bone Level Tapered Implants NC RC RC

∅ 3.3 mm ∅ 4.1 mm ∅ 4.8 mm

SLA® BLT ∅ 3.3 NC BLT ∅ 4.1 RC BLT ∅ 4.8 RC


021.3508021.3510021.3512021.3514021.3516

021.5508021.5510021.5512021.5514021.5516

021.7508021.7510021.7512021.7514021.7516

14

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Implants Overview

Straumann® PURE Ceramic ImplantsStraumann® PURE Ceramic Implants

Straumann® PURE Ceramic implants ND RD

Level of the implant post AH 4.0 mm AH 5.5 mm AH 4.0 mm AH 5.5 mm

∅ 3.5 mm ∅ 3.5 mm ∅ 4.8 mm ∅ 4.8 mm

∅ 3.3 mm ∅ 3.3 mm ∅ 4.1 mm ∅ 4.1 mm

ZLA® Ø 3.3 ND Ø 3.3 ND Ø 4.1 RD Ø 4.1 RD

8 mm10 mm12 mm14 mm

031.001S031.002S031.003S031.004S

031.011S031.012S031.013S031.014S

031.021S031.022S031.023S031.024S

031.031S031.032S031.033S031.034S

1.8 mm

15

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Explanation of Color Coding

Explanation of coding and typesExplanation of coding and types

Color coding

yellow Endosteal implant diameter 3.3 mm

red Endosteal implant diameter 4.1 mm

green Endosteal implant diameter 4.8 mm

Implant types

TL

S Standard Implant

SP Standard Plus Implant

TE Tapered Effect Implant

BLBL Bone Level Implant

BLT Bone Level Tapered Implant

Connection types

NNC: Narrow Neck CrossFit® ∅ 3.5 mm

∅ 3.5 mm

RN: Regular Neck ∅ 4.8 mm

∅ 4.8 mm

WN: Wide Neck ∅ 6.5 mm

∅ 6.5 mm

NC: Narrow CrossFit® ∅ 3.3 mm

∅ 3.3 mm

RC: Regular CrossFit® ∅ 4.1 and ∅ 4.8 mm

∅ 4.1 mm ∅ 4.8 mm

16

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

17

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

eryTissue Level Implants

18

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Tissue Level ImplantsImplants ∅ 3.3 mm

3.3

Implants

Roxolid® SLActive®

Product Platform Image Material Length Art.-No.

Standard PlusNNC∅ 3.3

NNC – Narrow Neck CrossFit® ∅ 3.5 mm Roxolid® 8 mm 033.416S

10 mm 033.417S

12 mm 033.418S

14 mm 033.419S

Standard Plus∅ 3.3

RN – Regular Neck ∅ 4.8 mm 8 mm 033.511S

10 mm 033.512S

12 mm 033.513S

14 mm 033.514S

Standard∅ 3.3

8 mm 033.501S

10 mm 033.502S

12 mm 033.503S

14 mm 033.504S

16 mm 033.505S

Tapered Effect∅ 3.3

8 mm 033.521S

10 mm 033.522S

12 mm 033.523S

14 mm 033.524S

SLActive®, Guided


RN – Regular Neck ∅ 4.8 mm Roxolid® 8 mm 033.451G

10 mm 033.452G

12 mm 033.453G

Standard∅ 3.3

8 mm 033.431G

10 mm 033.432G

12 mm 033.433G

Roxolid® SLActive® Due to the combination of its surface and material:• Roxolid® Implants demonstrate higher fatigue resistance than titanium implants• smaller implants can be used for less invasive treatment options• safer and faster treatment in 3 – 4 weeks for all indications with SLActive® surfaces compared

with SLA®• sophisticated treatment protocols ensure more predictable outcomes with SLActive® surfaces

than with SLA®For further information and references, please visit www.straumann.com/science

19

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


3.3

Implants

Roxolid® SLA®


Standard PlusNNC∅ 3.3

NNC – Narrow Neck CrossFit® ∅ 3.5 mm Roxolid® 8 mm 043.416S

10 mm 043.417S

12 mm 043.418S

14 mm 043.419S


RN – Regular Neck ∅ 4.8 mm 8 mm 043.260S

10 mm 043.261S

12 mm 043.262S

14 mm 043.263S

Standard∅ 3.3

8 mm 043.255S

10 mm 043.256S

12 mm 043.257S

14 mm 043.258S

16 mm 043.259S


8 mm 043.264S

10 mm 043.265S

12 mm 043.266S

14 mm 043.267S

20

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


3.3

Closure Caps and Healing Caps

NNC Closure Caps and Healing Caps

Product Image Description Height Material Art.-No.

Closure Caps

Sterile NNC Closure Cap ∅ 2.6 mm, small 0 mm Ti 048.324S

∅ 2.6 mm, small, packa-ging 4 pieces

048.324SV4

∅ 4 mm, large 1.5 mm 048.325S

∅ 4 mm, large, packaging 4 pieces 048.325SV4

Healing Caps

Sterile NNC Healing Cap ∅ 4 mm, reduced height 3 mm Ti 048.071S

∅ 4 mm, regular height 4.5 mm 048.074S

∅ 4 mm, labial bevel 2 mm Ti/TAN 048.082S

RN Closure Caps and Healing Caps


Closure Caps

Sterile RN Closure Cap ∅ 3.5 mm, small 0 mm Ti 048.371S


048.371SV4

∅ 6 mm, large 1.5 mm 048.373S


Healing Caps

Sterile RN Healing Cap ∅ 5.5 mm 2 mm Ti 048.033S

3 mm 048.034S

4.5 mm 048.037S

∅ 5.5 mm, labial bevel, small 2 mm 048.028S

∅ 5.5 mm, labial bevel, large 3.5 mm 048.029S

21

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1

Implants




RN – Regular Neck ∅ 4.8 mm Roxolid® 4 mm 033.043SThe 4 mm Implant has a separate surgical protocol.

6 mm 033.560S

8 mm 033.561S

10 mm 033.562S

12 mm 033.563S

14 mm 033.564S

Standard∅ 4.1

6 mm 033.530S

8 mm 033.531S

10 mm 033.532S

12 mm 033.533S

14 mm 033.534S

16 mm 033.535S


8 mm 033.571S

10 mm 033.572S

12 mm 033.573S

14 mm 033.574S

SLActive®, Guided



10 mm 033.562G

12 mm 033.563G

Standard∅ 4.1

8 mm 033.531G

10 mm 033.532G

12 mm 033.533G


8 mm 033.571G

10 mm 033.572G

12 mm 033.573G

Roxolid® SLActive®Due to the combination of its surface and material:• Roxolid® Implants demonstrate higher fatigue resistance than titanium implants• smaller implants can be used for less invasive treatment options• safer and faster treatment in 3 – 4 weeks for all indications with SLActive® surfaces compared



22

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1

Implants

Roxolid® SLA®



RN – Regular Neck ∅ 4.8 mm Roxolid® 6 mm 043.161S

8 mm 043.162S

10 mm 043.163S

12 mm 043.164S

14 mm 043.165S

Standard∅ 4.1

6 mm 043.155S

8 mm 043.156S

10 mm 043.157S

12 mm 043.158S

14 mm 043.159S

16 mm 043.160S


8 mm 043.166S

10 mm 043.167S

12 mm 043.168S

14 mm 043.169S

23

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1




Closure Caps



048.371SV4

∅ 6 mm, large 1.5 mm 048.373S


Healing Caps


3 mm 048.034S

4.5 mm 048.037S



24

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.8

Implants




RN – Regular Neck ∅ 4.8 mm Roxolid® 4 mm 033.044SThe 4 mm Implant has a separate surgical protocol.

6 mm 033.590S

8 mm 033.591S

10 mm 033.592S

12 mm 033.593S

14 mm 033.594S

Standard∅ 4.8

6 mm 033.580S

8 mm 033.581S

10 mm 033.582S

12 mm 033.583S

14 mm 033.584S


WN – Wide Neck ∅ 6.5 mm 4 mm 033.045SThe 4 mm Implant has a separate surgical protocol.

6 mm 033.610S

8 mm 033.611S

10 mm 033.612S

12 mm 033.613S

Standard∅ 4.8

6 mm 033.600S

8 mm 033.601S

10 mm 033.602S

12 mm 033.603S


10 mm 033.622S

12 mm 033.623S

14 mm 033.624S

SLActive®, Guided



10 mm 033.592G

12 mm 033.593G




25

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.8

Implants

Roxolid® SLA®



RN – Regular Neck ∅ 4.8 mm Roxolid® 6 mm 043.066S

8 mm 043.067S

10 mm 043.068S

12 mm 043.069S

14 mm 043.070S

Standard∅ 4.8

6 mm 043.061S

8 mm 043.062S

10 mm 043.063S

12 mm 043.064S

14 mm 043.065S


WN – Wide Neck ∅ 6.5 mm 6 mm 043.655S

8 mm 043.656S

10 mm 043.657S

12 mm 043.658S

Standard∅ 4.8

6 mm 043.606S

8 mm 043.607S

10 mm 043.608S

12 mm 043.609S


10 mm 043.660S

12 mm 043.661S

14 mm 043.662S

26

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.8




Closure Caps



048.371SV4

∅ 6 mm, large 1.5 mm 048.373S


Healing Caps


3 mm 048.034S

4.5 mm 048.037S



WN Closure Caps and Healing Caps


Closure Caps

Sterile WN Closure Cap ∅ 4.3 mm 0 mm Ti 048.375S

Healing Caps

Sterile WN Healing Cap ∅ 7.2 mm 2 mm Ti 048.038S

3 mm 048.039S

4.5 mm 048.053S

∅ 7.2 mm, labial bevel 2 mm 048.030S

27

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

eryBone Level Implants

28

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Bone Level ImplantsImplants ∅ 3.3 mm

3.3

Implants



Bone Level∅ 3.3

NC – Narrow CrossFit® Roxolid® 8 mm 021.2308

10 mm 021.2310

12 mm 021.2312

14 mm 021.2314

Bone LevelTapered∅ 3.3

8 mm 021.3308

10 mm 021.3310

12 mm 021.3312

14 mm 021.3314

16 mm 021.3316

SLActive®, Guided

Bone Level∅ 3.3

NC – Narrow CrossFit® Roxolid® 8 mm 021.2208G

10 mm 021.2210G

12 mm 021.2212G




Roxolid® SLA®


Bone Level∅ 3.3

NC – Narrow CrossFit® Roxolid® 8 mm 021.2508

10 mm 021.2510

12 mm 021.2512

14 mm 021.2514


8 mm 021.3508

10 mm 021.3510

12 mm 021.3512

14 mm 021.3514

16 mm 021.3516

29

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


3.3

Closure Caps and Healing Abutments

NC Closure Caps and Healing Abutments


NC Closure Caps

Sterile NC Closure Cap small 0 mm Ti 024.2100S

packaging 4 pieces 024.2100S-04

large 0.5 mm 024.2105S


NC Healing Abutments

Sterile NC Healing Abutment

∅ 3.6 mm, conical 2 mm Ti 024.2222S

3.5 mm 024.2224S

5 mm 024.2226S

∅ 4.8 mm, conical 2 mm 024.2242S

3.5 mm 024.2244S

5 mm 024.2246S

∅ 3.3 mm, bottle-shaped 3.5 mm 024.2234S

5 mm 024.2236S

∅ 5 mm, customizable 7 mm PEEK 024.2270S

30

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1

Implants



Bone Level∅ 4.1

RC – Regular CrossFit® Roxolid® 8 mm 021.4308

10 mm 021.4310

12 mm 021.4312

14 mm 021.4314


8 mm 021.5308

10 mm 021.5310

12 mm 021.5312

14 mm 021.5314

16 mm 021.5316

SLActive®, Guided

Bone Level∅ 4.1

RC – Regular CrossFit® Roxolid® 8 mm 021.4308G

10 mm 021.4310G

12 mm 021.4312G




Roxolid® SLA®


Bone Level∅ 4.1


10 mm 021.4510

12 mm 021.4512

14 mm 021.4514


8 mm 021.5508

10 mm 021.5510

12 mm 021.5512

14 mm 021.5514

16 mm 021.5516

31

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1


RC Closure Caps and Healing Abutments


RC Closure Caps

Sterile RC Closure Cap small 0 mm Ti 024.4100S


large 0.5 mm 024.4105S


RC Healing Abutments

Sterile RC Healing Abutment


4 mm 024.0001S

6 mm 024.0002S

∅ 6 mm, conical 2 mm 024.0003S

4 mm 024.0004S

6 mm 024.0005S


4 mm 024.4224S

6 mm 024.4226S

∅ 6.5 mm, conical 2 mm 024.4242S

4 mm 024.4244S

6 mm 024.4246S

∅ 4.4 mm, bottle-shaped 4 mm 024.4234S



32

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.8

Implants



Bone Level∅ 4.8


10 mm 021.6310

12 mm 021.6312

14 mm 021.6314


8 mm 021.7308

10 mm 021.7310

12 mm 021.7312

14 mm 021.7314

16 mm 021.7316

SLActive®, Guided

Bone Level∅ 4.8

RC – Regular CrossFit® Roxolid® 8 mm 021.6308G

10 mm 021.6310G

12 mm 021.6312G




Roxolid® SLA®


Bone Level∅ 4.8


10 mm 021.6510

12 mm 021.6512

14 mm 021.6514


8 mm 021.7508

10 mm 021.7510

12 mm 021.7512

14 mm 021.7514

16 mm 021.7516

33

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.8


RC Closure Caps and Healing Abutments


RC Closure Caps

Sterile RC Closure Cap small 0 mm Ti 024.4100S


large 0.5 mm 024.4105S


RC Healing Abutments

Sterile RC Healing Abutment


4 mm 024.0001S

6 mm 024.0002S


4 mm 024.0004S

6 mm 024.0005S


4 mm 024.4224S

6 mm 024.4226S

∅ 6.5 mm, conical 2 mm 024.4242S

4 mm 024.4244S

6 mm 024.4246S




34

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

35

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

eryStraumann® PURE Ceramic Implants

36

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

Straumann® PURE Ceramic ImplantsImplants ∅ 3.3 mm

3.3

Implants

Straumann® PURE Ceramic Implants, ZLA®


Straumann®PURE CeramicImplants ∅ 3.3

ND – Abutment height 4 mm ZrO2 8 mm 031.001S

10 mm 031.002S

12 mm 031.003S

14 mm 031.004S

ND – Abutment height 5.5 mm 8 mm 031.011S

10 mm 031.012S

12 mm 031.013S

14 mm 031.014S

37

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


3.3

Components

Components for Straumann® PURE Ceramic Implants

Product Image Description Material Art.-No.

Impression-taking/Master Cast Fabrication

ND Impression Cap abutment height 4 mm POM 031.250

abutment height 5.5 mm 031.251

ND Implant Analog abutment height 4 mm TAN 031.200


Temporary Restoration

ND Temporary Coping for crowns PMMA 031.300

for bridges 031.301

Protective Caps

ND Protective Cap abutment height 4 mm PEEK 031.320


Position Indicators

ND Position Indicator length 8 mm, ∅ 2.2 mm, abutment height 4 mm Ti 031.102

length 8 mm, ∅ 2.8 mm, abutment height 4 mm 031.103

length 8 mm, ∅ 2.2 mm, abutment height 5.5 mm 031.112


38

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1

Implants

Straumann® PURE Ceramic Implants, ZLA®


Straumann®PURECeramicImplants ∅ 4.1

RD – Abutment height 4 mm ZrO2 8 mm 031.021S

10 mm 031.022S

12 mm 031.023S

14 mm 031.024S

RD – Abutment height 5.5 mm 8 mm 031.031S

10 mm 031.032S

12 mm 031.033S

14 mm 031.034S

39

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery


4.1

Components

Components for Straumann® PURE Ceramic Implants



RD Impression Cap abutment height 4 mm POM 031.260


RD Analog abutment height 4 mm TAN 031.210



RD Temporary Coping for crowns PMMA 031.310

for bridges 031.311

Protective Caps

RD Protective Cap abutment height 4 mm PEEK 031.330


Position Indicators

RD Position Indicator length 8 mm, ∅ 2.2 mm, abutment height 4 mm Ti 031.123

length 8 mm, ∅ 3.5 mm, abutment height 4 mm 031.125



40

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

41

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

eryTempImplants

42

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

TempImplantsImplants and Accessories

Implants


TempImplant length 10 mm, ∅ 2 mm, packaging 4 pieces TAN 80371SV4

length 12 mm, ∅ 2 mm, packaging 4 pieces 80372SV4

Accessories


Tool and Drills

Drill length 37 mm, ∅ 1.5 mm Stainless steel 80381

TempImplant InsertingDevice

mechanical, length 21.5 mm 80363

manual, length 19 mm 80398

TempImplant Bending Tool length 82 mm, height 21 mm 80356

Auxiliary Parts

Transfer Pin for retentive anchor, length 18 mm Stainless steel 048.109

Dalbo®-Rotex® Matrix packaging 4 pieces PA 80399V4

43

HQ

/ 26

.12.

2015

/ En

glis

h

Surg

ery

44

When searching for prosthetic components, first specify Tissue Level or Bone Level, and then search by prosthetic platform. These are marked by colored rec-tangles on the side tabs of each page. You will find the correspond-ing components, ranging from sin-gle crown to hybrid restoration. In-struments and accessories can be found in the "Instruments and Ac-cessories" chapter.

More than just highest precision: a perfectly adjusted system

Straumann offers a wide variety of implant-borne prosthetic solutions for all indications – ranging from single tooth restorations to edentulous solutions. Our high-quality connection solutions, Straumann® synOcta® and CrossFit®, ensure safe positioning of the abutment on the implant and therefore long-last-ing stability. A broad range of materials combined with a choice of screw-retained, cemented and hybrid restorations complete our portfolio.

Original on originalStraumann knows all dimensions, tolerances and materials of all Straumann implants. With this knowl-edge we tune the design of implants and prosthetic components perfectly to each other. High precision in manufacturing and thorough testing processes ensure the consistent quality of all original Straumann components. Straumann® CARES® for individual CADCAM prosthetics Straumann® CARES® offers you prosthetic solutions from single tooth restorations to tooth-borne dental bridges, all the way to implant-borne restorations. This is complemented by a comprehensive choice of materials and simple processes. This means precision, a high degree of efficiency and highly aesthetic re-sults in every single product.

45

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Prosthetics

Tissue Level NNC 47Narrow Neck CrossFit® (NNC) 48

Crowns and Bridges 48

Solid Abutments 52

Hybrid 53

Tissue Level RN 57Regular Neck (RN) synOcta® 58


Solid Abutments 65

Hybrid 68

Tissue Level WN 77Wide Neck (WN) synOcta® 78


Solid Abutments 85

Hybrid 87

Prosthetic Planning Aids (NNC, RN, WN) 90

PLAN abutments 90

Bone Level NC 93Narrow CrossFit® (NC) 94


Hybrid 107

Bone Level RC 113Regular CrossFit® (RC) 114


Hybrid 127

Prosthetic Planning Aids (NC, RC) 133

PLAN Abutments 133

Straumann® Classic 137Classic Sets 139

Components 140

Components and Tools 141

46

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

47

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsTissue Level NNC

Narrow Neck CrossFit®

48

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Tissue Level NNCNarrow Neck CrossFit® (NNC)

NNC

Crowns and Bridges



Impression Posts

NNC Impression Post screw-retained, for open-tray impression, height 10.1 mm

TAN 048.128

screw-retained, for closed-tray impression, height 10.9 mm

POM/TAN 048.134

NNC Implant Analog length 12.5 mm Ti 048.127

Digital Impression

CARES® NNCMono Scanbody

including Fixation Screw ∅ 3.5 mm, height 10 mm PEEK/TAN 048.173

Bite Registration Aid

NNC Bite Registration Aid short, height 8 mm, packaging 4 pieces POM 048.960V4

NNC Bite Registration Aid long, height 12 mm, packaging 4 pieces 048.961V4



VITA CAD-Temp®

NNCTemporary AbutmentVITA CAD-Temp®

including screw 048.314, height 10 mm, ∅ 5 mm PMMA/TAN 048.699

Replacement Screw

NNC Basal Screw for NNC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.1 mm

TAN 048.314

Temporary Abutments

NNC Post for temporary restorations, for crowns including screw 048.313, height 10.3 mm

TAN 048.501

for temporary restorations, for bridges including screw 048.313, height 10.3 mm

048.502

Replacement Screw

NNC Basal Screw for NNC Titanium Alloy Temporary Abutments, Gold Abutments and Variobase®, length 7.1 mm

TAN 048.313

49

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Crowns and Bridges

Cement-Retained Restoration, Cementable Abutments


Cementable Abutment, 0°

NNC CementableAbutment

straight, for crowns and bridges, including screw 048.314, height 5.7 mm

Ti 048.598

Cementable Abutments, 15°

NNC CementableAbutment

angled, angle 15°, type A, including screw 048.314, height 5.9 mm

Ti 048.621

angled, angle 15°, type B, including screw 048.314, height 5.9 mm

048.622

Burn-out Copings

NNC Plastic Coping for Cementable Abutment, straight, for crowns, height 7 mm

POM 048.256

for Cementable Abutment, straight, for bridges, height 7 mm

048.257

for Cementable Abutment, angled, angle 15°, for crowns and bridges, height 7.2 mm

048.258

Replacement Screw

NNC Basal Screw for NNC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.1 mm

TAN 048.314

50

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Crowns and Bridges


NNC

Crowns and Bridges

Cement or Screw-Retained Restoration, CADCAM


Variobase® Abutments

NNC Variobase®for Crown

including screw 048.313, ∅ 3.9 mm, height 3.75 mm TAN 048.709

including screw 048.313, ∅ 3.9 mm, height 5.75 mm 022.0021

NNC Variobase®for Bridge/Bar


CADCAM, Wax-up

NNC Wax-up Sleeve length 12.75 mm PEEK 048.137

packaging 4 pieces 048.137V4

Replacement Screw


TAN 048.313

NC/RC SRBB Bone LevelScrew

for CADCAM CARES® Screw-retained Bridges/Bars, for Variobase® for Bridge/Bar, length 7.9 mm

025.2926

Straumann® CARES® CADCAM• customized solutions ranging from individual tooth restorations to tooth-borne bridges to

implant-borne restorations• wide range of applications and choice of materials• access to premium customized genuine Straumann® CARES® abutments through Straumann®

CARES® Scan & Shape, without additional hardware and software investments• customized solutions for all indications• you can find additional information at www.straumann.com

Cement or Screw-Retained Restoration, Gold Abutments


Gold Abutment

NNC Gold Abutment for crowns, including screw 048.313, height 3.6 mm Ceramicor®/TAN/POM

048.592

for bridges, including screw 048.313, height 3.6 mm 048.593

Replacement Screw


TAN 048.313

Ceramicor® is a non-oxidizing precious metal alloy forcasting on precious metal alloys.

51

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Crowns and Bridges

Cement or Screw-retained Restoration, Variobase®



NNC Variobase®for Crown

including screw 048.313, ∅ 3.9 mm, height 3.75 mm TAN 048.709


NNC Variobase®for Bridge/Bar


Burn-out Copings

NNC Burn-out Coping for Variobase® for Crown with height 3.75, ∅ 3.9 mm, height 11.1 mm

POM 048.267


for Variobase® for Crown with height 5.75 mm, ∅ 3.9 mm, height 11.1 mm

023.0014


for Variobase® for Bridge/Bar with height 3.5 mm, ∅ 5.4 mm, height 11.4 mm

023.0008


Replacement Screw


TAN 048.313



025.2926

52

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Solid Abutments

Impression-taking/Master Cast Fabrication for Solid Abutments



NNC Impression Cap height 8 mm POM 048.579

NNCPositioning Cylinder

for 048.547, yellow, height 10.2 mm 048.587

for 048.548, gray, height 10.2 mm 048.588

for 048.549, blue, height 10.2 mm 048.589

NNC Implant Analog for Solid Abutment 048.547, yellow, height 14.3 mm TAN 048.527

for Solid Abutment 048.548, gray, height 15.8 mm 048.528

for Solid Abutment 048.549, blue, height 17.3 mm 048.529


NNC Temporary Coping for Solid Abutment, for crowns, height 8.5 mm PMMA 048.658

for Solid Abutment, for bridges, height 8.5 mm 048.659

Protective Caps

NNC Protective Cap for Solid Abutment 048.547, height 5.6 mm PEEK 048.700

for Solid Abutment 048.548, height 7.1 mm 048.701

for Solid Abutment 048.549, height 8.6 mm 048.702

Cement-Retained Restoration, Solid Abutments


Solid Abutments

NNC Solid Abutment yellow, height 4 mm Ti 048.547

gray, height 5.5 mm 048.548

blue, height 7 mm 048.549

Burn-out Copings

NNC Plastic Coping for Solid Abutment, for crowns, height 10.2 mm POM 048.263

for Solid Abutment, for bridges, height 10.2 mm 048.264

Tools and Auxiliary Parts

NNC Solid AbutmentDriver

short, length 13 mm Stainless steel

048.155

long, length 19 mm 048.156

53

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Hybrid

LOCATOR®



LOCATOR®Impression Coping

height 4 mm, packaging 4 pieces Al housing with LDPE insert 048.197V4

LOCATOR®Female Analog

length 10 mm, ∅ 4 mm, packa-ging 4 pieces

Al 025.0120-04

Titanium Abutments

NNC LOCATOR®Abutment

height 1 mm TAV 048.581

height 2 mm 048.582

height 3 mm 048.583

height 4 mm 048.584

height 5 mm 048.585

height 6 mm 048.586

Manufacturer Zest Anchors, Inc.Escondido, CA 92029USA

54

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NNC

Hybrid


NNC

Hybrid

LOCATOR®


Lab Set, up to 20° Divergence Compensation

LOCATOR® Male Processing Package

includes: Denture Cap (∅ 5.5 mm, height 2.5 mm) with black Processing Male (height 1.9 mm), Block-out Spacer (048.196), clear Replacement Male (048.190), pink Replacement Male (048.191), blue Replacement Male (048.192), packaging 2 pieces

Ti/Nylon/LDPE

048.189V2

LOCATOR®Replacement Male

clear, angle 0°–10°, height 1.7 mm, packaging 4 pieces Nylon 048.190V4

pink, light retention, angle 0°–10°, height 1.7 mm, packa-ging 4 pieces

048.191V4

blue, extra-light retention, angle 0°–10°, height 1.7 mm, packaging 4 pieces

048.192V4



extended range, includes: Denture Cap (∅ 5.5 mm, height 2.5 mm) with black Processing Male (height 1.9 mm), Block-out Spacer (048.196), green Replacement Male (048.193), orange Replacement Male (048.188), red Replacement Male (048.194), packaging 2 pieces

Ti/Nylon/LDPE

048.182V2


green, extended range, angle 10°–20°, height 1.7 mm, packa-ging 4 pieces

Nylon 048.193V4

orange, light retention, extended range, angle 10°–20°, height 1.7 mm, packaging 4 pieces

048.188V4

red, extra-light retention, extended range, angle 10°–20°, height 1.7 mm, packaging 4 pieces

048.194V4

gray, extended range, zero retention, height 1.7 mm, packa-ging 4 pieces

048.181V4


55

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

LOCATOR® Components


LOCATOR®Parallel Post

length 8 mm, packaging 4 pieces LDPE 048.199V4

LOCATOR®Processing Male, black

height 1.9 mm, packaging 4 pieces 048.195V4

LOCATOR®Block-out Spacer

thickness 0.4 mm, packaging 20 pieces Silicone rubber

048.196V20

LOCATOR®Processing Spacer

packaging 4 pieces POM 048.218V4

LOCATOR®AbutmentHolder Sleeve

to fasten abutment to the tool, packaging 4 pieces PSU 046.413V4


NNC

Hybrid


LOCATOR® Core Tool three-part, length 100 mm Stainless steel

046.415

LOCATOR® Screwdriver for Ratchet, short, length 15 mm 046.416

for Ratchet, long, length 21 mm 046.417

LOCATOR®Angle Measurement Guide

length 50 mm, width 15 mm 048.200


56

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

57

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsTissue Level RN

Regular Neck

58

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Tissue Level RNRegular Neck (RN) synOcta®

RN

Crowns and Bridges




RN synOcta®Impression Post

screw-retained, for open-tray impression, height 10 mm

Al/Ti 048.010


048.090

RN Impression Cap white, for closed-tray impression, height 8 mm, packaging 4 pieces

POM 048.017V4

RN synOcta®Positioning Cylinder

red, for closed-tray impression, height 12 mm 048.070V4

RN synOcta®Analog

gray with red stripe, length 12 mm Stainless steel

048.124

Digital Impression

CARES® RNMono Scanbody

including Fixation Screw, ∅ 4.8 mm, height 10 mm PEEK/TAN 048.168

RN Straumann®Scanbody

including Fixation Screw, for Straumann® CARES® es1 Scanner and Straumann® CARES® Scan CS2 Scanner, for software version CARES® Visual 6.2 and lower, length 8.5 mm

PEEK/Ti 048.068

RC RepositionableImplant Analog

for fully digital and conventional workflow, length 17.6 mm

Stainless steel

048.129


Bite Registration Aid short, height 8 mm, ∅ 5 mm, packaging 4 pieces POM 048.940V4

long, height 12 mm, ∅ 5 mm, packaging 4 pieces 048.941V4

59

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics



VITA CAD-Temp®

RNTemporary AbutmentVITA CAD-Temp®


Replacement Screw

synOcta®Basal Screw for RN/WN Variobase®, Gold Abutments and Tempo-rary Abutments VITA CAD-Temp® and customized Titanium Abutment and Screw-retained Bridges and Bars, CARES®, CADCAM, length 6.7 mm

TAN 048.356

Temporary Abutments

RN synOcta® Post for temporary restorations, for crowns, including screw 049.181, height 9 mm

Ti 048.715

for temporary restorations, for bridges, including screw 049.181, height 9 mm

048.716


RN

Crowns and Bridges

Replacement Screw

SCS Occlusal Screw for RN/WN Titanium Alloy Temporary Abutment, length 7.6 mm

TAN 049.181

Cement-Retained Restoration, Cementable Abutment


Cementable Abutment

RN synOcta®CementableAbutment

straight, with integral basal screw, height 5.5 mm Ti 048.605

Burn-out Copings

RN synOcta®Plastic Coping

for RN synOcta® Cementable Abutment 048.605, for crowns, height 7 mm

POM 048.663

for RN synOcta® Cementable Abutment 048.605, for bridges, height 7 mm

048.662

Auxiliary Parts

Transfer Aid RN synOcta® Cementable Abutment 048.605, height 6.5 mm, packaging 4 pieces

PC 048.059V4

60

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Crowns and Bridges


RN

Crowns and Bridges

Cement or Screw-Retained Restoration, Angled Abutments


Angled Abutments, 15°

RN synOcta®AngledAbutment, 15°

short, type A, height 5.7 mm, with integral basal screw Ti/TAN 048.612

long, type A, height 6.7 mm, with integral basal screw 048.610

short, type B, height 5.7 mm, with integral basal screw 048.613

long, type B, height 6.7 mm, with integral basal screw 048.611


RN synOcta®AngledAbutment, 20°

short, type A, height 5.7 mm, with integral basal screw Ti/TAN 048.617

long, type A, height 6.7 mm, with integral basal screw 048.615

short, type B, height 5.7 mm, with integral basal screw 048.618

long, type B, height 6.7 mm, with integral basal screw 048.616

Burn-out Copings

Extension Shell for synOcta® Angled Abutment, short and long 15° and 20°, height 5.5 mm

POM 048.670

Plastic Shoulder for synOcta® Angled Abutment, short and long 15° and 20°, height 4 mm, packaging 4 pieces

048.676V4

Auxiliary Parts and Screws

SCS Occlusal Screw for occlusal screw-retained RN/WN Caps and Copings, length 4.4 mm

Ti 048.350


Transfer Aid for RN synOcta® 15° and 20° Angled Abutments, short, height 5.5 mm, packaging 4 pieces

PC 048.000V4

for RN synOcta® 15° and 20° Angled Abutments, long, height 5.5 mm, packaging 4 pieces

048.002V4

61

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics




RN Variobase®for Crown

including screw 048.356, ∅ 5.05 mm, height 4 mm TAN 048.710

including screw 048.356, ∅ 5.05 mm, height 6 mm 022.0022

RN Variobase® for CEREC® including screw 022.0045, ∅ 5 mm, height 7.7 mm 022.0019

RN Variobase®for Bridge/Bar



RN

Crowns and Bridges

CADCAM, Wax-up

RN Wax-up Sleeve for single use, length 19.3 mm PEEK 048.088

packaging 4 pieces 048.088-04

Customized CARES® Abutments

CADCAM RN Abutment, Ceramic

including synOcta® 1.5, available via CARES® scanner system or Scan & Shape Service

Zirconia n/a

CADCAM RN Abutment, Titanium

available via CARES® scanner system or Scan & Shape Service

Ti

LOCATOR® for Bars

LOCATOR® Bar Abutment M2 Thread (2.0 mm), height 1.78 mm, packa-ging 10 pieces

TAV 048.804V10

M2 Thread (2.0 mm), height 1.78 mm, packa-ging 2 pieces

048.804V2

LOCATOR® Bar Male Processing Package

includes: Denture Cap (∅ 5.5 mm, height 2.5 mm) with yellow Processing Male, Block-out Spacer (048.196), clear Replacement Male (048.190), pink Replacement Male (048.191), blue Replacement Male (048.192), packaging 10 pieces

Ti/Nylon/LDPE

048.805V10


048.805V2

62

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Crowns and Bridges



Replacement Screws

RN Occlusal Screw for customized RN Zirconia Abutments, CARES®, CADCAM, length 5 mm

TAN 048.354

packaging 4 pieces TAN 048.354V4


TAN 048.356

Basal Screw RN/WN Variobase®

for RN/WN Variobase® for CEREC®, length 7.2 mm 022.0045




Cement or Screw-Retained Restoration, Gold Abutment


Gold Abutment

RN synOcta® Gold Abutment

for crowns, including screw 048.356, height 4.3 mm Ceramicor®/POM

048.642


Replacement Screw


TAN 048.356

Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.

63

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Crowns and Bridges

Cement or Screw-Retained Restoration, Variobase®



RN Variobase®for Crown

including screw 048.356, ∅ 5.05 mm, height 4 mm TAN 048.710

including screw 048.356, ∅ 5.05 mm, height 6 mm 022.0022

RN Variobase®for Bridge/Bar


Burn-out Copings

RN Burn-outCoping

for Variobase® Abutment, ∅ 5.05 mm, height 11.1 mm POM 048.268


for Variobase® for Crown with height 6 mm, ∅ 5 mm, height 11.1 mm

023.0015



023.0009


Replacement Screw


TAN 048.356



64

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Crowns and Bridges

Screw-Retained Restoration, synOcta® 1.5


Abutment

RN synOcta® 1.5Screw-retainedAbutment

with integral basal screw, height 1.5 mm TAN 048.601

Gold Copings

RN synOcta®Gold Coping

for synOcta® 1.5 (including modeling aid), for crowns, height 4.25/12 mm

Ceramicor®/POM

048.633

for synOcta® 1.5 (including modeling aid), for bridges, height 4.25/12 mm

048.632

Burn-out Copings


for synOcta® 1.5, for crowns, height 10 mm POM 048.229

for synOcta® 1.5, for bridges and bars, height 10 mm 048.227

Titanium Milling Cylinder

RN synOcta®Meso Milling Cylinder

for synOcta® 1.5, for crowns, height 10 mm, ∅ 8 mm Ti 048.571

RN synOcta®Milling Cylinder

for synOcta® 1.5, for crowns, height 8 mm, ∅ 6 mm 048.240

for synOcta® 1.5, for bridges, height 8 mm, ∅ 6 mm 048.241



Ti 048.350


SCS Guide Screw for occlusal screw-retained RN/WN Copings, cannot be shortened, length 8 mm, packaging 4 pieces

048.362V4

for occlusal screw-retained RN/WN Copings, can be shortened by 2 mm, length 8 mm, packaging 4 pieces

048.363V4

Polishing Protector for RN synOcta® Copings, transocclusal screw-retained, length 15 mm

Stainless steel

046.245


65

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Solid Abutments




RN Impression Cap white, for closed-tray impression, height 8 mm, packaging 4 pieces

POM 048.017V4

Positioning Cylinder for 048.540, yellow, height 10.2 mm, packa-ging 4 pieces

048.060V4

for 048.541, gray, height 10.2 mm, packaging 4 pieces 048.061V4

for 048.542, blue, height 10.2 mm, packaging 4 pieces 048.062V4

Implant Analog for 048.540, yellow, length 14.3 mm Al 048.160

for 048.541, gray, length 15.8 mm 048.161

for 048.542, blue, length 17.3 mm 048.162

Shoulder Analog for RN Solid Abutments, with Reinforcement Pin, length 10 mm, Length 17 mm, packaging 4 pieces

PPS/Brass 048.117V4


RN Temporary Coping for RN Solid Abutment, for crowns, height 8.5 mm PMMA 048.655

for RN Solid Abutment, for bridges, height 8.5 mm 048.654

Protective Caps

RN Protective Cap for 048.540, cementable, height 5.8 mm, packa-ging 4 pieces

PEEK 048.047V4

for 048.541, cementable, height 7.3 mm, packa-ging 4 pieces

048.048V4

for 048.542, cementable, height 8.8 mm, packa-ging 4 pieces

048.049V4

66

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Solid Abutments



Solid Abutments

RN Solid Abutment 6° yellow, height 4 mm Ti 048.540

gray, height 5.5 mm 048.541

blue, height 7 mm 048.542

Burn-out Copings

Plastic Coping for RN Solid Abutment, for crowns, height 10 mm POM 048.245

for RN Solid Abutment, for bridges, height 10 mm 048.246

All-in-One Set

RN Solid All-in-One Set for crowns, height 4 mm 040.740

for crowns, height 5.5 mm 040.741

for crowns, height 7 mm 040.742

for bridges, height 4 mm 040.840

for bridges, height 5.5 mm 040.841


67

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Solid Abutments




Inserting Device for RN Solid Abutment, 6°, short, length 13 mm Stainless steel

046.067

for RN Solid Abutment, 6°, long, length 19 mm 046.068

68

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid

Bar Construction, Gold


Abutment



Bar Gold Coping

RN synOcta® Gold Coping for synOcta® 1.5, for bar, height 5.8 mm, alloy weight 0.789 g

Ceramicor® 048.204



Ti 048.350


Bar Profiles

Dolder® Bar, Gold egg-shaped cross-section, mini, length 25 mm, height 2.3 mm, width 1.6 mm

Elitor® 048.411

egg-shaped cross-section, regular, length 25 mm, height 3 mm, width 2.2 mm

048.412

Bar Matrices

Dolder® Bar Matrix, Gold including spacer, mini, length 25 mm, height 2.75 mm, width 3.6 mm

Elitor®/Brass 048.413

including spacer, regular, length 25 mm, height 3.5 mm, width 4.6 mm

048.414

Bar Set (Gold)

Bar Set Gold Includes: 2 x RN synOcta® 1.5 Abutment, 048.601, 2 x RN synOcta® Analogs, 048.124, 2 x RN synOcta® Gold Coping, Bar, 048.204, 4 x SCS Occlusal Screw, 048.350

040.195


69

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid

Bar Construction, Titanium


Abutment



Bar Titanium Coping

RN synOcta® Titanium Coping

for synOcta® 1.5, for bars, height 6 mm Ti 048.214



Ti 048.350


Bar Profiles

Dolder® Bar, Titanium egg-shaped cross-section, mini, length 50 mm, height 2.3 mm, width 1.6 mm

Ti 048.466


048.465

Bar Matrices

Dolder® Bar Matrix, Titanium

includes spacer, mini, length 50 mm, height 3.5 mm, width 2.8 mm

Ti/Brass 048.471

includes spacer, standard, length 50 mm, height 4.5 mm, width 3.6 mm

048.470

Bar Set (Titanium)

Bar Set Titanium Includes: 2 x RN synOcta® 1.5 Abutment, screw-re-tained, 048.601, 2 x RN synOcta® Analogs, 048.124, 2 x RN synOcta® Titanium Coping, Bar, 048.214, 2 x SCS Occlusal Screw, 048.350

040.196

70

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid

Bar Construction, Plastic


Abutment



Bar Burn-out Copings


for synOcta® 1.5, for bridges and bars, height 10 mm POM 048.227



Ti 048.350


Bar Profiles

Dolder® Bar, Plastic egg-shaped cross-section, mini, length 80 mm, height 2.3 mm, width 1.6 mm

PMMA 048.461


048.460

Bar Matrices



Ti/Brass 048.471


048.470

Bar Set (Plastic)

Bar Set Plastic Includes: 2 x RN synOcta® 1.5 Abutment, screw-re-tained, 048.601, 2 x RN synOcta® Analogs, 048.124, 2 x RN synOcta® Plastic Coping, Bar, 048.227, 2 x SCS Occlusal Screw, 048.350

040.197

71

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Tools and Auxiliary Parts for Bar


RN synOcta®Impression Cap

for bars with 048.601, one-part, gray, height 5 mm, packaging 4 pieces

POM 048.093V4

RN synOcta®Analog

for bars with 048.601, one-part, length 11.5 mm Stainless steel

048.108

Polishing Protector for RN synOcta® Copings, transocclusal screw-retained, length 15 mm

046.245

Stabilization Pin for RN synOcta® Gold Copings, length 11 mm, packaging 4 pieces

048.208V4

Fixation Pin for bars with 048.601, gray, length 5 mm, packa-ging 4 pieces

POM 048.073V4

Activator Set for all bar matrices, three-part, length 50 mm Stainless steel

046.150

Deactivator for Dolder® Bar Matrix, mini, length 66 mm Grilon BS/Brass

046.151

for Dolder® Bar Matrix, standard, length 66 mm 046.152


RN

Hybrid

72

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid


RN

Hybrid

Retentive Anchor Abutment



Transfer Pin for retentive anchor, length 18 mm Stainless steel

048.109

Titanium Abutments

Retentive Anchor Abutment height 3.4 mm, spherical head ∅ 2.25 mm Ti 048.439

Elliptical Matrix and Accessories

Elliptical Matrix for Retentive Anchor including Lamella Retention Insert, height 3.2 mm, ∅ 3.6 mm

Elitor®/Ti 048.456

Spare Lamella Retention Insert

for Elliptical Matrix, height 2.6 mm Elitor® 048.457

Screwdriver for Lamella Retention Insert, length 37 mm Stainless steel

046.154

Titanium Matrix and Accessories

Titanium Matrix for Retentive Anchor, height 3.1 mm Ti alloy 048.450

Spring for 048.450, packaging 4 pieces Stainless steel

048.455V4

Screwdriver for Titanium Matrix, length 50 mm 048.452

Extractor for Titanium Matrix, length 100 mm 048.453

Spacer for Titanium Matrix, height 3.5 mm, packaging 4 pieces POM 048.451V4

Threaded Mounting Ring for Titanium Matrix, height 2.2 mm, packaging 4 pieces 048.454V4


Retentive AnchorDriver

length 19 mm Stainless steel

046.069

73

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid


RN

Hybrid

LOCATOR®







Al 048.198V4

Titanium Abutments

RN LOCATOR®Abutment


height 2 mm 048.176

height 3 mm 048.177

height 4 mm 048.178

height 5 mm 048.179

height 6 mm 048.180


74

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RN

Hybrid


RN

Hybrid

LOCATOR®





Ti/Nylon/LDPE

048.189V2



pink, light retention, angle 0°–10°, height 1.7 mm, packaging 4 pieces

048.191V4


048.192V4



extended range, includes: Denture Cap (∅ 5.5 mm, height 2.5 mm) with black Processing Male (height 1.9 mm), Block-out Spacer (048.196), green Replace-ment Male (048.193), orange Replacement Male (048.188), red Replacement Male (048.194), packa-ging 2 pieces

Ti/Nylon/LDPE

048.182V2


green, extended range, angle 10°–20°, height 1.7 mm, packaging 4 pieces

Nylon 048.193V4


048.188V4


048.194V4

gray, extended range, zero retention, height 1.7 mm, packaging 4 pieces

048.181V4


75

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics









048.196V20






RN

Hybrid



046.415






76

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

77

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsTissue Level WN

Wide Neck

78

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Tissue Level WNWide Neck (WN) synOcta®

WN

Crowns and Bridges




WN synOcta®Impression Post


Al/Ti 048.091

WN Impression Cap white, for closed-tray impression, height 8 mm POM 048.013

WN synOcta®Positioning Cylinder

white, for closed-tray impression, height 12 mm 048.095

WN synOcta®Analog

gray, length 12 mm Stainless steel

048.171

Digital Impression

CARES® WNMono Scanbody

including Fixation Screw, ∅ 6.5 mm, height 10 mm PEEK/TAN 048.169

WN Straumann®Scanbody


PEEK/Ti 048.069

WN RepositionableImplant Analog

for fully digital and conventional workflow, length 17.8 mm

Stainless steel

048.172


Bite Registration Aid short, height 8 mm, ∅ 5 mm, packaging 4 pieces POM 048.940V4

long, height 12 mm, ∅ 5 mm, packaging 4 pieces 048.941V4

79

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics



VITA CAD-Temp®

WN Temporary AbutmentVITA CAD-Temp®


Replacement Screw


TAN 048.356

Temporary Abutments

WN synOcta® Post for temporary restorations, for crowns, including screw 049.181, height 9 mm

Ti 048.717

for temporary restorations, for bridges, including screw 049.181, height 9 mm

048.718


WN

Crowns and Bridges

Replacement Screw


TAN 049.181

Cement-Retained Restoration, Straight Abutment


Cementable Abutment

WN synOcta®CementableAbutment

with integral basal screw, height 5.5 mm Ti 048.606

Burn-out Copings

WN synOcta®Plastic Coping

for 048.606, for crowns, height 7.35 mm POM 048.243

for 048.606, for bridges, height 7.35 mm 048.244

Auxiliary Parts

Transfer Aid for 048.606, height 6.5 mm, packaging 4 pieces PC 048.054V4

80

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Crowns and Bridges

Cement-Retained Restoration, Angled Abutment



WN synOcta®AngledAbutment, 15°

type A, with integral basal screw, height 5.5 mm Ti/TAN 048.608

type B, with integral basal screw, height 5.5 mm 048.609

Plastic Shoulder for WN synOcta® 15° Angled Abutments, angle 15°, height 4 mm

POM 048.678

Transfer Aid for WN synOcta® Angled Abutments, angle 15°, height 5 mm

PC 048.032




WN Variobase®for Crown

including screw 048.356, ∅ 7 mm, height 4.5 mm TAN 048.711

including screw 048.356, ∅ 7 mm, height 6.5 mm 022.0023

WN Variobase® for CEREC® including screw 022.0045, ∅ 6.7 mm, height 8.2 mm 022.0020

WN Variobase®for Bridge/Bar


CADCAM, Wax-up

WN Wax-up Sleeve for single use, length 16.4 mm PEEK 048.089


Customized CARES® Titanium Abutment

CADCAM WN Abutment, Titanium

available via CARES® scanner system orScan & Shape Service

Ti n/a

LOCATOR® for Bars


TAV 048.804V10


048.804V2



Ti/Nylon/LDPE

048.805V10


048.805V2

81

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Crowns and Bridges



Replacement Screws


TAN 048.356






Not all abutments are available via CARES® CADCAM

82

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Crowns and Bridges

Cement or Screw-Retained Restoration, Gold Abutment


Gold Abutment

WN synOcta® Gold Abutment

for crowns, including screw 048.356, height 14.1 mm Ceramicor®/POM

048.644


Replacement Screw


TAN 048.356


83

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Crowns and Bridges




WN Variobase®for Crown

including screw 048.356, ∅ 7 mm, height 4.5 mm TAN 048.711


WN Variobase®for Bridge/Bar


Burn-out Copings

WN Burn-outCoping

for Variobase®, ∅ 7 mm, height 11.1 mm POM 048.269


for Variobase® for Crown with height 6.5 mm, ∅ 7 mm, height 11.1 mm

023.0016


for Variobase® for Bridge/Bar with height 5.2 mm, ∅ 7.8 mm, height 11 mm

023.0010


Replacement Screw


TAN 048.356



84

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Crowns and Bridges

Screw-Retained Restoration, synOcta® 1.5


Abutment

WN synOcta® 1.5Screw-retainedAbutment


Gold Copings

WN synOcta®Gold Coping

for synOcta® 1.5 (including modeling aid), for crowns, height 4.75/12 mm, alloy weight 0.898 g

Ceramicor®/POM

048.639

for synOcta® 1.5 (including modeling aid), for bridges, height 4.75/12 mm, alloy weight 0.879 g

048.638

Burn-out Copings

WN synOcta®Plastic Coping

for crowns, height 10 mm POM 048.667


Meso Milling Cylinder

WN synOcta®Meso Milling Cylinder

for synOcta® 1.5, for crowns, height 10 mm, ∅ 10 mm Ti 048.573

Screws


Ti 048.350



85

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Solid Abutments




WN Impression Cap white, for closed-tray impression, height 8 mm POM 048.013

Positioning Cylinder for 048.545, green, height 10 mm 048.065

for 048.546, brown, height 10 mm 048.066

Implant Analog for 048.545, length 16 mm Al 048.165

for 048.546, length 17.5 mm 048.166

Shoulder Analog for WN Solid Abutment, length 10 mm 048.140


WN Temporary Coping for WN Solid Abutment, for crowns, height 7.3 mm PMMA 048.657

for WN Solid Abutment, for bridges, height 7.3 mm 048.656

Protective Caps

WN Protective Cap for 048.545, height 6 mm PEEK 048.051

for 048.546, height 7.5 mm 048.052

86

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Solid Abutments


WN

Solid Abutments



Solid Abutments

WN Solid Abutment 6° green, height 4 mm Ti 048.545

brown, height 5.5 mm 048.546

Burn-out Copings

Plastic Coping for WN Solid Abutment, for crowns, height 7 mm POM 048.247

for WN Solid Abutment, for bridges, height 7 mm 048.248

All-in-One Set

WN Solid All-in-One Set for crowns, height 4 mm 040.745

for crowns, height 5.5 mm 040.746


for bridges, height 5.5 mm 040.846


SCS Screwdriver for Ratchet, extra short, length 15 mm Stainless steel

046.400

for Ratchet, short, length 21 mm 046.401


87

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Hybrid

LOCATOR®







Al 048.198V4

Titanium Abutments

WN LOCATOR®Abutment


height 2 mm 048.184

height 3 mm 048.185

height 4 mm 048.186

height 5 mm 048.187


88

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


WN

Hybrid


WN

Hybrid

LOCATOR®





Ti/Nylon/LDPE

048.189V2




048.191V4


048.192V4




Ti/Nylon/LDPE

048.182V2



Nylon 048.193V4


048.188V4


048.194V4


048.181V4


89

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics









048.196V20






WN

Hybrid



046.415






90

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Tissue Level WNProsthetic Planning Aids (NNC, RN, WN)

PLAN abutments

PLAN Abutments


Prosthetic Planning Kit

Soft Tissue LevelPLAN-Set

Includes: all PLAN Abutments for Tissue Level, length 278 mm, width 124 mm, height 33 mm

PC 048.904

Soft Tissue LevelPLAN Cassette

empty, length 278 mm, width 124 mm, height 33 mm 048.905

NNC PLAN Abutments

NNC PLAN Cementable Abutment, straight

for crowns and bridges, height 5.7 mm, packaging 4 pieces POM 048.943V4

NNC PLAN Cementable Abutment, angled 15°

type A, height 5.9 mm, packaging 4 pieces 048.944V4

type B, height 5.9 mm, packaging 4 pieces 048.945V4

NNC PLAN Locator® Abutment

height 1 mm, packaging 4 pieces 048.946V4






NNC PLAN Solid Abutment




91

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


PLAN abutments

PLAN Abutments


RN PLAN Abutments

RN synOcta® 1.5 PLAN Abutment

height 1.5 mm, packaging 4 pieces POM 048.929V4

RN synOcta®CementablePLAN Abutment


RN synOcta® Transversal PLAN Abutment


RN synOcta®AngledPLAN Abutment, 15°

type A, short, height 5.7 mm, packaging 4 pieces 048.916V4

type B, short, height 5.7 mm, packaging 4 pieces 048.917V4


type A, short, height 5.7 mm, packaging 4 pieces 048.918V4

type B, short, height 5.7 mm, packaging 4 pieces 048.919V4


type A, long, height 6.7 mm, packaging 4 pieces 048.922V4

type B, long, height 6.7 mm, packaging 4 pieces 048.923V4


type A, long, height 6.7 mm, packaging 4 pieces 048.924V4

type B, long, height 6.7 mm, packaging 4 pieces 048.925V4

RN PLAN LOCATOR® Abutment







RN PLAN Solid Abutment




92

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


PLAN abutments

PLAN Abutments


WN PLAN Abutments

WN synOcta® 1.5 PLAN Abutment

height 1.5 mm, packaging 4 pieces POM 048.931V4

WN synOcta® Cementable PLAN Abutment


WN synOcta® 15° Angled PLAN Abutment

type A, height 5.5 mm, packaging 4 pieces 048.933V4

type B, height 5.5 mm, packaging 4 pieces 048.934V4

WN PLAN LOCATOR® Abutment






WN PLAN Solid Abutment 6°



93

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsBone Level NC

Narrow CrossFit®

94

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Bone Level NCNarrow CrossFit® (NC)

NC

Crowns and Bridges



Impression Posts and Analog

NC Impression Post screw-retained, for open-tray impression, short, length 16.5 mm

TAN 025.2202

screw-retained, for open-tray impression, long, length 24 mm

025.2205

screw-retained, for closed-tray impression, includes 2 caps, length 12.3 mm

TAN/POM 025.2201

NC Implant Analog length 12 mm Ti 025.2101

Digital Impression

CARES® NC Mono Scanbody including Fixation Screw, ∅ 3.5 mm, height 10 mm PEEK/TAN 025.2915

NC Straumann®Scanbody


025.2905

NC RepositionableImplant Analog

for fully digital and conventional workflow, length 17 mm

Stainless steel

025.2102


NCBite Registration Aid

short, height 8 mm, packaging 4 pieces POM 025.2208-04

long, height 12 mm, packaging 4 pieces 025.2212-04



VITA CAD-Temp®

NCTemporary AbutmentVITA CAD-Temp®


Replacement Screw

NC Basal Screw for NC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.9 mm

TAN 025.2908

Temporary Abutments

NC Temporary Abutment for crowns, including screw 025.2900, height 11 mm, ∅ 3.5 mm

TAN 024.2371

for bridges, including screw 025.2900, height 11 mm, ∅ 3.5 mm

024.2375

Replacement Screw

NC Basal Screw for NC Anatomic Abutments, NC Variobase® for Crown and CEREC®, NC Gold Abutments and NC Gold and Titanium Abutments for bars, length 7.9 mm

TAN 025.2900

95

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges

Cement-Retained Restoration, Anatomic Abutments


Anatomic Abutments, Titanium

NC AnatomicAbutment

straight, including screw 025.2900, gingiva height 2 mm

Ti 022.2102

straight, including screw 025.2900, gingiva height 3.5 mm

022.2104

angled, angle 15°, including screw 025.2900, gingiva height 2 mm

022.2152

angled, angle 15°, including screw 025.2900, gingiva height 3.5 mm

022.2154

Replacement Screw


TAN 025.2900

Cement or Screw-Retained Restorations, Anatomic Abutments


IPS e.max® Zirconia Abutment, MO 0

NC Straumann®AnatomicIPS e.max®Abutment


ZrO2 022.2812


022.2814


022.2822


022.2824


NC Straumann®AnatomicIPS e.max®Abutment


ZrO2 022.2832


022.2834


022.2842


022.2844

Replacement Screw

NC Basal Screw for NC IPS e.max® Anatomic Abutments and CARES® Zirconia Abutments, length 8.9 mm

TAN 025.2906

96

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges



Impression Caps (at abutment level) for Single Crown Restoration (engaging)

NC Impression Cap for Cementable Abutments, ∅ 3.5 mm, abutment height 4 mm, packaging 4 pieces

POM 025.2203-04

for Cementable Abutments, ∅ 5 mm, abutment height 4 mm, packaging 4 pieces

025.2204-04

for Cementable Abutments, ∅ 5 mm, abutment height 5.5 mm, packaging 4 pieces

025.2220-04

Analogs

NC Implant Analog for Cementable Abutments, ∅ 3.5 mm, abutment height 4 mm

TAN 025.2112

for Cementable Abutments, ∅ 3.5 mm, abutment height 5.5 mm

025.2116

for Cementable Abutments, ∅ 5 mm, abutment height 4 mm

025.2122

for Cementable Abutments, ∅ 5 mm, abutment height 5.5 mm

025.2126


NC Temporary Coping for Cementable Abutments, ∅ 3.5 mm PMMA 024.2346

for Cementable Abutments, ∅ 5 mm 024.2356

Protective Caps

NC Protective Cap for Cementable Abutments, ∅ 3.5 mm, abutment height 4 mm, packaging 4 pieces

PEEK 024.2312-04

for Cementable Abutments, ∅ 3.5 mm, abutment height 5.5 mm, packaging 4 pieces

024.2316-04

for Cementable Abutments, ∅ 5 mm, abutment height 4 mm, packaging 4 pieces

024.2322-04


024.2326-04

Transfer Aid

NC Transfer Aid for Cementable Abutments, ∅ 3.5 mm, packa-ging 4 pieces

PC 025.2911-04

for Cementable Abutments, ∅ 5 mm, packa-ging 4 pieces

025.2912-04

97

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges



Cementable Abutments with Emergence Profile ∅ 3.5 mm

NC CementableAbutment

including screw 025.2908, ∅ 3.5 mm, gingiva height 1 mm, abutment height 4 mm

Ti 022.2311


022.2312


022.2313

including screw 025.2908, ∅ 3.5 mm, gingiva height 1 mm, abutment height 5.5 mm

022.2315


022.2316


022.2317

Cementable Abutments with Emergence Profile ∅ 5 mm

NC CementableAbutment

including screw 025.2908, ∅ 5 mm, gingiva height 1 mm, abutment height 4 mm

Ti 022.2321


022.2322


022.2323

including screw 025.2908, ∅ 5 mm, gingiva height 1 mm, abutment height 5.5 mm

022.2325


022.2326


022.2327

Replacement Screw

NC Basal Screw for NC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.9 mm

TAN 025.2908

Burn-out Copings, Emergence Profile ∅ 3.5 mm

NC Coping for crowns on Cementable Abutments, ∅ 3.5 mm POM 023.2316

for bridges on Cementable Abutments, ∅ 3.5 mm 023.2310

Burn-out Copings, Emergence Profile ∅ 5 mm

NC Coping for crowns on Cementable Abutments, ∅ 5 mm POM 023.2326

for bridges on Cementable Abutments, ∅ 5 mm 023.2320

98

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges


NC

Crowns and Bridges

Cement-Retained Restoration, All-in-One Set


All-in-One Sets for Emergence Profile ∅ 3.5 mm

NC CementableAll-in-One Setfor Crowns

∅ 3.5 mm, gingiva height 1 mm, abutment height 4 mm

027.4301


027.4302


027.4303

99

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges



All-in-One Sets for Emergence Profile ∅ 5 mm

NC CementableAll-in-One Setfor Crowns

∅ 5 mm, gingiva height 1 mm, abutment height 4 mm 027.4307



∅ 5 mm, gingiva height 1 mm, abutment height 5.5 mm

027.4310


027.4311


027.4312

100

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges




NC Variobase® for Crown including screw 025.2900, ∅ 3.8 mm, height 3.5 mm TAN 025.2921


NC Variobase® for CEREC® including screw 025.2900, ∅ 4.5 mm, height 4.7 mm 022.0025

NC Variobase®for Bridge/Bar


NC Variobase® Copingfor Bridge/Bar

for Screw-retained Abutments, including screw 023.4763, ∅ 4.2 mm, height 3.5 mm

023.0000

NC/RC Variobase® Coping for Bridge/Bar


023.0001

CADCAM, Wax-up

NC Wax-up Sleeve for single use, length 15.2 mm PEEK 025.2903


Customized CARES® Zirconium Dioxide Abutment

CADCAM NC Abutment, Ceramic


Zirconia n/a


CADCAM NC Abutment, Titanium


Ti n/a

LOCATOR® for Bars


TAV 048.804V2


048.804V10



Ti/Nylon/LDPE

048.805V2


048.805V10

101

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges



Replacement Screws


TAN 025.2900


025.2906



025.2926

NC/RC Occlusal Screw for NC/RC Titanium, Gold, Burn-Out and Variobase® Coping for Screw-retained Abutments, length 3.7 mm

023.4763




Cement or Screw-retained Restoration, Gold Abutment


Gold Abutment

NC Gold Abutment for crowns, including screw 025.2900, height 3.7 mm, alloy weight 0.313 g

Ceramicor®/POM

022.2410

Replacement Screw


TAN 025.2900

Polishing Aid

NC Polishing Aid length 16 mm Stainless steel

025.2920

length 16 mm, packaging 4 pieces 025.2920-04


102

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges




NC Variobase® for Crown including screw 025.2900, ∅ 3.8 mm, height 3.5 mm TAN 025.2921


NC Variobase®for Bridge/Bar


NC Variobase® Copingfor Bridge/Bar


023.0000



023.0001

Burn-out Copings

NC Burn-out Coping for Variobase® for Crown with height 3.5 mm, ∅ 3.8 mm, height 12 mm

POM 023.2756


for Variobase® for Crown with height 5.5 mm, ∅ 3.8 mm, height 12 mm

023.0018



023.0006


for Variobase® Coping for Screw-retained Abutment with ∅ 3.5 mm, ∅ 5.3 mm, height 11.4 mm

023.0004


NC/RC Burn-out Coping for NC/RC Variobase® Coping for Screw-retained Abutment with ∅ 4.6 mm, ∅ 6.1 mm, height 11.4 mm

023.0005


Replacement Screw


TAN 025.2900


025.2906



025.2926


023.4763

103

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges

Screw-Retained Restoration with Screw-Retained Abutment


Impression Posts (at abutment level) for Single Crown Restoration (engaging)

Impression Posts for Open-tray Impression

for Screw-retained Abutments, abutment level, ∅ 3.5 mm

TAN 025.2243


025.2244

Impression Posts for Closed-tray Impression


TAN/POM 025.2245


025.2246

Impression Posts (at abutment level) for Multi-Unit Restorations (non engaging)



TAN 025.0011


025.0012



TAN/POM 025.0013


025.0014

Digital Impression

CARES® Mono Scanbody for Screw-retained Abutments, abutment level, including Fixation Screw, ∅ 3.5 mm

PEEK 025.0000

for Screw-retained Abutments, abutment level, including Fixation Screw, ∅ 4.6 mm

025.0001

Repositionable Analog for Screw-retained Abutments, ∅ 3.5 mm Stainless steel

025.0007

for Screw-retained Abutments, ∅ 4.6 mm 025.0008

Analogs

NC Analog for Screw-retained Abutments, straight, ∅ 3.5 mm TAN 023.2754

NC/RC Analog for Screw-retained Abutments, straight, ∅ 4.6 mm 023.4756

for Screw-retained Abutments, angled, angle 17°/30°, ∅ 4.6 mm

023.4757

Lab Auxiliaries

Polishing Aid for Screw-retained Abutments, ∅ 3.5 mm TAN 025.0004


for Screw-retained Abutments, ∅ 4.6 mm 025.0005


Lab Processing Screw for Screw-retained Abutments Stainless steel

025.0006

104

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges



Protective Caps

NC Protective Cap for Screw-retained Abutments, including screw 023.4763, ∅ 3.5 mm, height 5 mm, packaging 4 pieces

PEEK 024.2323-04

for Screw-retained Abutments, including screw 023.4763, ∅ 3.5 mm, height 6.5 mm, packa-ging 4 pieces

024.2324-04

for Screw-retained Abutments, including screw 023.4763, ∅ 3.5 mm, height 8 mm, packaging 4 pieces

024.2325-04

NC/RC Protective Cap for Screw-retained Abutments, including screw 023.4763, ∅ 4.6 mm, height 5.1 mm, packa-ging 4 pieces

024.4323-04


024.4324-04


024.4325-04

Auxiliary Part

Straumann®Planning Template

visual guide for tilted implant placement in Strau-mann® Pro Arch cases

026.0016

Transfer And Alignment Pin for Screw-retained Abutments TAN 025.0009

Screw-Retained Restoration with Screw-Retained Abutment, Abutments


Screw-retained Abutments 0°

NC Screw-retainedAbutment

straight, including pin 025.0009 and screw 023.4749, ∅ 3.5 mm, gingiva height 1 mm

TAN 022.2745P

straight, including pin 025.0009 and screw 023.4750, ∅ 3.5 mm, gingiva height 2.5 mm

022.2746P


022.2753P




TAN 022.2747P


022.2748P


022.2754P

105

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics



angled, angle 17°, type A, including pin 025.0009 and screw 025.0002, ∅ 4.6 mm, gingiva height 2.5 mm

TAN 022.2749P

angled, angle 17°, type B, including pin 025.0009 and screw 025.0002, ∅ 4.6 mm, gingiva height 2.5 mm

022.2750P

angled, angle 17°, type A, including pin 025.0009 and screw 025.0002, ∅ 4.6 mm, gingiva height 4 mm

022.2755P

angled, angle 17°, type B, including pin 025.0009 and screw 025.0002, ∅ 4.6 mm, gingiva height 4 mm

022.2756P


022.0010P


022.0011P


NC

Crowns and Bridges






TAN 022.2751P


022.2752P


022.2757P


022.2758P


022.0012P


022.0013P

Replacement Screws

NC/RC Screw for NC/RC Screw-retained Abutments 0°, gingiva height 1 mm, length 8.8 mm

TAN 023.4749

for NC/RC Screw-retained Abutments 0°, gingiva height 2.5 mm, length 10.3 mm

023.4750

for NC/RC Screw-retained Abutments 0°, gingiva height 4 mm, length 11.8 mm

023.4760

for NC/RC Screw-retained Abutments 17° and 30°, length 7.2 mm

025.0002

106

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Crowns and Bridges

Screw-Retained Restoration with Screw-Retained Abutment, Copings


Titanium Copings

NC Coping for Screw-retained Abutments, for crowns, including screw 023.4763, ∅ 3.5 mm, height 11 mm

Ti 023.2747

for Screw-retained Abutments, for bridges, including screw 023.4763, ∅ 3.5 mm, height 11 mm

023.2749

NC/RC Coping for Screw-retained Abutments, for crowns, including screw 023.4763, ∅ 4.6 mm, height 11 mm

023.4747


023.4751

Gold Copings

NC/RC Coping for Screw-retained Abutments, for crowns, including screw 023.4763, alloy weight 0.359 g, ∅ 3.5 mm

Ceramicor®/POM

023.2751

for Screw-retained Abutments, for bridges, including screw 023.4763, alloy weight 0.356 g, ∅ 3.5 mm

023.2752

for Screw-retained Abutments, for crowns, including screw 023.4763, alloy weight 0.440 g, ∅ 4.6 mm

023.4753


023.4754

Burn-out Copings

NC Burn-outCoping

for Screw-retained Abutments, for crowns, including screw 023.4763, ∅ 3.5 mm, height 11 mm

POM 023.2748

for Screw-retained Abutments, for bridges and bars, including screw 023.4763, ∅ 3.5 mm, height 11 mm

023.2755

NC/RC Burn-outCoping


023.4748


023.4758

Replacement Screw


TAN 023.4763


107

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Hybrid

Bar Construction on Screw-Retained Abutments, Gold


Bar Gold Coping ∅ 3.5 mm

NC Coping for Screw-retained Abutments, for bars, including screw 023.4763, alloy weight 0.681 g, ∅ 3.5 mm

Ceramicor® 023.2753

Bar Gold Coping ∅ 4.6 mm

NC/RC Coping for Screw-retained Abutments, for bars, including screw 023.4763, alloy weight 0.744 g, ∅ 4.6 mm


Replacement Screw


TAN 023.4763

Bar Profile


Elitor® 048.411


048.412

Bar Matrices




048.414

Bar Construction Alternative with Gold Abutment


NC Abutment, one-part for bars, gold, including screw 025.2900, height 10 mm, alloy weight 1.5 g


Replacement Screw


TAN 025.2900


108

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Hybrid

Bar Construction on Screw-Retained Abutments, Titanium


Bar Titanium Coping ∅ 3.5 mm

NC Coping for Screw-retained Abutments, including screw 023.4763, ∅ 3.5 mm, height 5.5 mm

Ti 023.2750

Bar Titanium Coping ∅ 4.6 mm

NC/RC Coping for Screw-retained Abutments, including screw 023.4763, ∅ 4.6 mm, height 5.5 mm

Ti 023.4752

Replacement Screw


TAN 023.4763

Bar Profile


Ti 048.466


048.465

Bar Matrices



Ti/Brass 048.471


048.470

Bar Construction Alternative with Titanium Abutment


NC Abutment for bars, including screw 025.2900, height 10 mm Ti 022.2702


TAN 025.2900

109

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Bar Construction on Screw-Retained Abutments, Plastic


Bar Burn-out Coping for ∅ 3.5 mm

NC Burn-outCoping


POM 023.2755


NC

Hybrid

Bar Burn-out Coping for ∅ 4.6 mm



POM 023.4758

Replacement Screw


TAN 023.4763

Bar Profile


PMMA 048.461


048.460

Bar Matrices



Ti/Brass 048.471


048.470

Tools, Auxiliary Parts for Bar



046.150


046.151


110

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Hybrid

LOCATOR®







Al 025.0120-04

Titanium Abutments

NC LOCATOR®Abutment


height 3 mm 022.2503





111

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Hybrid


NC

Hybrid

LOCATOR®





Ti/Nylon/LDPE

048.189V2




048.191V4


048.192V4




Ti/Nylon/LDPE

048.182V2



Nylon 048.193V4


048.188V4


048.194V4


048.181V4


112

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


NC

Hybrid









048.196V20







046.415






113

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsBone Level RC

Regular CrossFit®

114

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Bone Level RCRegular CrossFit® (RC)

RC

Crowns and Bridges



Impression Posts and Analog

RC Impression Post screw-retained, for open-tray impression, short, length 16.5 mm

TAN 025.4202

screw-retained, for open-tray impression, long, length 24 mm

025.4205

screw-retained, for closed-tray impression, includes 2 caps, length 12.3 mm

TAN/POM 025.4201

RC Implant Analog length 12 mm Ti 025.4101

Digital Impression

CARES® RC Mono Scanbody including Fixation Screw, ∅ 4.1 mm, height 10 mm PEEK/TAN 025.4915

RC Straumann® Scanbody for Straumann® CARES® es1 Scanner and Straumann® CARES® Scan CS2 Scanner, for software version CARES® Visual 6.2 and lower, including Fixation Screw, length 13.4 mm

025.4905

RC RepositionableImplant Analog

for fully digital and conventional workflow, length 17 mm

Stainless steel

025.4102


RC Bite Registration Aid short, height 8 mm, packaging 4 pieces POM 025.4208-04

long, height 12 mm, packaging 4 pieces 025.4212-04



VITA CAD-Temp®

RC Temporary Abutment VITA CAD-Temp®


Replacement Screw

RC Basal Screw for RC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, for Cementable Abut-ments only, length 7.9 mm

TAN 025.4908

Temporary Abutments

RC Temporary Abutment for crowns, including screw 025.4900, height 11 mm, ∅ 4.5 mm

TAN 024.4371

for bridges, including screw 025.4900, height 11 mm, ∅ 4.5 mm

024.4375

Replacement Screw

RC Basal Screw for RC Anatomic Abutments, RC Variobase® for Crown and CEREC®, RC Gold Abutments for Crown and RC Gold and Titanium Abutments for bars, length 7.9 mm

TAN 025.4900

115

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges

Cement-Retained, Anatomic Abutments


Anatomic Abutments, Titanium

RC AnatomicAbutment


Ti 022.4102


022.4104


022.4152


022.4154

Replacement Screw


TAN 025.4900

Cement or Screw-Retained Restorations, Anatomic Abutments



RC Straumann®AnatomicIPS e.max®Abutment


ZrO2 022.4812


022.4814


022.4822


022.4824


RC Straumann®AnatomicIPS e.max®Abutment


ZrO2 022.4832


022.4834


022.4842


022.4844

Replacement Screw

RC Basal Screw for RC IPS e.max® Anatomic Abutments and CARES® Zirconia Abutments, length 8.2 mm

TAN 025.4906

116

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges



Impression Caps (at abutment level) for Single Crown Restoration (engaging)

RC Impression Cap for Cementable Abutments, ∅ 5 mm, abutment height 4 mm, packaging 4 pieces

POM 025.4203-04


025.4220-04

for Cementable Abutments, ∅ 6.5 mm, abutment height 4 mm, packaging 4 pieces

025.4204-04


025.4230-04

Analogs

RC Implant Analog for Cementable Abutments, ∅ 5 mm, abutment height 4 mm

TAN 025.4132

for Cementable Abutments, ∅ 5 mm, abutment height 5.5 mm

025.4136

for Cementable Abutments, ∅ 6.5 mm, abutment height 4 mm

025.4122

for Cementable Abutments, ∅ 6.5 mm, abutment height 5.5 mm

025.4126


RC Temporary Coping for Cementable Abutments, ∅ 5 mm PMMA 024.4356

for Cementable Abutments, ∅ 6.5 mm 024.4366

Protective Caps

RC Protective Cap for Cementable Abutments, ∅ 5 mm, abutment height 4 mm, packaging 4 pieces

PEEK 024.4322-04

RC Protective Cap for Cementable Abutments, ∅ 6.5 mm, abutment height 4 mm, packaging 4 pieces

024.4332-04


024.4326-04


024.4336-04

Transfer Aid

RC Transfer Aid for Cementable Abutments, ∅ 5 mm, packa-ging 4 pieces

PC 025.4912-04

for Cementable Abutments, ∅ 6.5 mm, packa-ging 4 pieces

025.4913-04

117

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Cementable Abutments with Emergence Profile ∅ 5 mm

RC CementableAbutment


Ti 022.4321


022.4322


022.4323


022.4325


022.4326


022.4327


RC

Crowns and Bridges



Cementable Abutments with Emergence Profile ∅ 6.5 mm

RC CementableAbutment


Ti 022.4331


022.4332


022.4333


022.4335


022.4336


022.4337

Replacement Screw

RC Basal Screw for RC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, for Cementable Abut-ments only, length 7.9 mm

TAN 025.4908

Burn-out Copings, Emergence Profile ∅ 5 mm

RC Coping for crowns on Cementable Abutments, ∅ 5 mm POM 023.4326

for bridges on Cementable Abutments, ∅ 5 mm 023.4320

Burn-out Copings, Emergence Profile ∅ 6.5 mm

RC Coping for crowns on Cementable Abutments, ∅ 6.5 mm POM 023.4336

for bridges on Cementable Abutments, ∅ 6.5 mm 023.4330

118

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges



All-in-One Sets for Emergence Profile ∅ 5 mm

RC CementableAll-in-One Setfor Crowns





027.4316


027.4317


027.4318

119

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

All-in-One Sets for Emergence Profile ∅ 6.5 mm

RC CementableAll-in-One Setfor Crowns


027.4319


027.4320


027.4321

∅ 6.5 mm, gingiva height 1 mm, abutment height 5.5 mm

027.4322


027.4323


027.4324


RC

Crowns and Bridges



120

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges




RC Variobase® for Crown including screw 025.4900, ∅ 4.5 mm, height 3.5 mm TAN 025.4921


RC Variobase® for CEREC® including screw 025.4900, ∅ 4.5 mm, height 4.7 mm 022.0024

RC Variobase® forBridge/Bar




023.0001

CADCAM, Wax-up

RC Wax-up Sleeve for single use, length 18.8 mm PEEK 025.4903


Customized CARES® Zirconium Dioxide Abutment

CADCAM RC Abutment, Ceramic


Zirconia n/a


CADCAM RC Abutment, Titanium


Ti n/a

LOCATOR® for Bars


TAV 048.804V2


048.804V10



Ti/Nylon/LDPE

048.805V2


048.805V10

121

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges



Replacement Screws


TAN 025.4900

for RC IPS e.max® Anatomic Abutments and CARES® Zirconia Abutments, length 8.2 mm

025.4906



025.2926


023.4763




122

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges


RC

Crowns and Bridges

Cement or Screw-Retained Restoration, Gold Abutments


Gold Abutment

RC Gold Abutment for crowns, including screw 025.4900, height 3.8 mm, alloy weight 0.562 g

Ceramicor®/POM

022.4410

for bridges, including screw 025.4902, height 5.2 mm, alloy weight 0.551 g

022.4430

Auxiliary Parts and Replacement Screws


TAN 025.4900

for RC Gold Abutments, for bridges, length 8.3 mm 025.4902

Polishing Aid

RC Polishing Aid length 16 mm Stainless steel

025.4920



123

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges


RC

Crowns and Bridges



Abutment

RC Variobase® for Crown including screw 025.4900, ∅ 4.5 mm, height 3.5 mm TAN 025.4921


RC Variobase® forBridge/Bar




023.0001

Burn-out Copings

RC Burn-out Coping for Variobase® Abutments, ∅ 4.5 mm, height 12 mm POM 023.4759


for Variobase® for Crown with height 5.5 mm, ∅ 4.5 mm, height 12 mm

023.0017



023.0007


NC/RC Burn-out Coping for NC/RC Variobase® Coping for Screw-retained Abutment with ∅ 4.6 mm, ∅ 6.1 mm, height 11.4 mm

023.0005


Replacement Screw


TAN 025.4900


023.4763



025.2926

124

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges



Impression Posts (at abutment level) for Single Crown Restoration (engaging)



TAN 025.2244


TAN/POM 025.2246

Impression Posts (at abutment level) for Multi-Unit Restorations (non engaging)



TAN 025.0012


TAN/POM 025.0014

Digital Impression

CARES® Mono Scanbody for Screw-retained Abutments, abutment level, including Fixation Screw, ∅ 4.6 mm

PEEK 025.0001

Repositionable Analog for Screw-retained Abutments, ∅ 4.6 mm Stainless steel

025.0008

Analogs

NC/RC Analog for Screw-retained Abutments, straight, ∅ 4.6 mm TAN 023.4756

for Screw-retained Abutments, angled, angle 17°/30°, ∅ 4.6 mm

023.4757

Lab Auxiliaries

Polishing Aid for Screw-retained Abutments, ∅ 4.6 mm TAN 025.0005


Lab Processing Screw for Screw-retained Abutments Stainless steel

025.0006

Protective Caps

NC/RC Protective Cap for Screw-retained Abutments, including screw 023.4763, ∅ 4.6 mm, height 5.1 mm, packa-ging 4 pieces

PEEK 024.4323-04


024.4324-04


024.4325-04

Auxiliary Part

Straumann®Planning Template

visual guide for tilted implant placement in Strau-mann® Pro Arch cases

026.0016

Transfer And Alignment Pin for Screw-retained Abutments TAN 025.0009

125

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges




RC Screw-retainedAbutment


TAN 022.4745P


022.4746P


022.4751P




TAN 022.4747P


022.4748P


022.4752P


022.4753P


022.0014P


022.0015P




TAN 022.4749P


022.4750P


022.4754P


022.4755P


022.0016P


022.0017P

Replacement Screws


TAN 023.4749


023.4750


023.4760

for NC/RC Screw-retained Abutments 17° and 30°, length 7.2 mm

025.0002

126

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Crowns and Bridges

Screw-Retained Restoration with Screw-Retained Abutment, Copings


Titanium Copings

NC/RC Coping for Screw-retained Abutments, for crowns, including screw 023.4763, ∅ 4.6 mm, height 11 mm

Ti 023.4747


023.4751

Gold Copings

NC/RC Coping for Screw-retained Abutments, for crowns, including screw 023.4763, alloy weight 0.440 g, ∅ 4.6 mm

Ceramicor®/POM

023.4753


023.4754

Burn-out Copings



POM 023.4748


023.4758

Replacement Screw


TAN 023.4763


127

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Hybrid

Bar Construction on Screw-Retained Abutments, Gold


Bar Gold Coping

NC/RC Coping for Screw-retained Abutments, for bars, including screw 023.4763, alloy weight 0.744 g, ∅ 4.6 mm


Replacement Screw


TAN 023.4763

Bar Profile


Elitor® 048.411


048.412

Bar Matrices




048.414

Bar Construction Alternative with Gold Abutment


RC Abutment for bars, gold, including screw 025.4900, height 10 mm, alloy weight 1.9 g


Replacement Screw


TAN 025.4900


128

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Hybrid

Bar Construction on Screw-Retained Abutments, Titanium


Bar Titanium Coping

NC/RC Coping for Screw-retained Abutments, including screw 023.4763, ∅ 4.6 mm, height 5.5 mm

Ti 023.4752

Replacement Screw


TAN 023.4763

Bar Profile


Ti 048.466


048.465

Bar Matrices



Ti/Brass 048.471


048.470

Bar Construction Alternative with Titanium Abutment


RC Abutment for bars, including screw 025.4900, height 10 mm Ti 022.4702

Replacement Screw


TAN 025.4900

129

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Bar Construction on Screw-Retained Abutments, Plastic


Bar Burn-out Coping



POM 023.4758


RC

Hybrid

Replacement Screw


TAN 023.4763

Bar Profile


PMMA 048.461


048.460

Bar Matrices



Ti/Brass 048.471


048.470

Tools, Auxiliary Parts for Bar



046.150


046.151


130

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Hybrid

LOCATOR®







Al 025.0120-04

Titanium Abutments

RC LOCATOR®Abutment








131

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Hybrid


RC

Hybrid

LOCATOR®





Ti/Nylon/LDPE

048.189V2




048.191V4


048.192V4




Ti/Nylon/LDPE

048.182V2



Nylon 048.193V4


048.188V4


048.194V4


048.181V4


132

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


RC

Hybrid









048.196V20







046.415






133

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Bone Level RCProsthetic Planning Aids (NC, RC)

PLAN Abutments

PLAN Abutments


Prosthetic Planning Kit

Bone Level PLAN Set

length 278 mm, width 124 mm, height 33 mm POM 026.0902

Bone Level PLAN Cassette

empty, length 278 mm, width 124 mm, height 33 mm PC 026.0000

NC PLAN Abutments

NC PLANAnatomicAbutment

straight, gingiva height 2 mm, packaging 4 pieces POM 025.2601-04

straight, gingiva height 3.5 mm, packaging 4 pieces 025.2602-04

angled, angle 15°, gingiva height 2 mm, packaging 4 pieces 025.2603-04

angled, angle 15°, gingiva height 3.5 mm, packaging 4 pieces 025.2604-04

NC PLANGold Abutment

for crowns, height 3.2 mm, packaging 4 pieces 025.2610-04

NC PLANCementableAbutment

∅ 3.5 mm, gingiva height 1 mm, abutment height 4 mm, packaging 4 pieces

025.2611-04


025.2612-04


025.2613-04

∅ 3.5 mm, gingiva height 1 mm, abutment height 5.5 mm, packaging 4 pieces

025.2615-04


025.2616-04


025.2617-04

∅ 5 mm, gingiva height 1 mm, abutment height 4 mm, packaging 4 pieces

025.2621-04


025.2622-04


025.2623-04

∅ 5 mm, gingiva height 1 mm, abutment height 5.5 mm, packaging 4 pieces

025.2625-04


025.2626-04


025.2627-04

134

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


PLAN Abutments

PLAN Abutments


NC PLAN LOCATOR®Abutment

height 2 mm, packaging 4 pieces POM 025.2642-04

height 3 mm, packaging 4 pieces 025.2643-04




NC PLAN Screw-retainedAbutment

straight, ∅ 3.5 mm, gingiva height 2.5 mm, packaging 4 pieces 025.2648-04


angled, angle 17°, type A, ∅ 4.6 mm, gingiva height 2.5 mm, packaging 4 pieces

025.2655-04

angled, angle 17°, type B, ∅ 4.6 mm, gingiva height 2.5 mm, packaging 4 pieces

025.2658-04


025.2653-04


025.2660-04

RC PLAN Abutments

RC PLANAnatomicAbutment

straight, gingiva height 2 mm, packaging 4 pieces POM 025.4601-04

straight, gingiva height 3.5 mm, packaging 4 pieces 025.4602-04

angled, angle 15°, gingiva height 2 mm, packaging 4 pieces 025.4603-04

angled, angle 15°, gingiva height 3.5 mm, packaging 4 pieces 025.4604-04

RC PLANGold Abutment

for crowns, height 3.3 mm, packaging 4 pieces 025.4610-04

RC PLANCementableAbutment


025.4621-04


025.4622-04


025.4623-04


025.4625-04


025.4626-04


025.4627-04

RC PLANGold Abutment

for bridges, height 5.2 mm, packaging 4 pieces 025.4630-04

135

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


PLAN Abutments

PLAN Abutments


RC PLANCementableAbutment


POM 025.4631-04


025.4632-04


025.4633-04


025.4635-04


025.4636-04


025.4637-04

RC PLANLOCATOR®Abutment







RC PLANScrew-retainedAbutment



025.4649-04


025.4650-04


025.4653-04


025.4660-04

136

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

137

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

icsStraumann® Classic

138

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Straumann® Classic

Straumann® ClassicStraumann® Classic

Warranty and customer service increase the value of a product and strengthen the level of trust.

This is why we give you and your patients a lifelong guarantee on all our implants, providing they are used in combination with other original Straumann components.

And that‘s not all; our „Straumann® Classic“ program gives you security in being able to access spare parts for older implant restorations. You can reorder prosthetic components for all Straumann implants manufactured after 1974.

Straumann® Classic components are indicated by a “C” at the end of the article number.

Straumann® Classic is not available in all countries. Please contact your official local Straumann distributor for more information about this service.

139

1250

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

Straumann® ClassicClassic Sets

Classic Sets


Classic Set for Implant Types C,E,F,H and K, used approx. between 1974 and 1980

Classic Set, type C, E, F, H and K

Set includes: Implant Analog, Occlusal Screw, 9° Impression Cap, Gold Coping

Stainless steel/Ti/Al/Ceramicor®

040.919C

Classic Set for TPS Implants (Ledermann Screw), used approx. between 1975 and 1986

Classic Set,Implant Type TPS

Set includes:TPS Implant Analog, TPS Occlusal Screw, length 4 mm, TPS Impression Cap, TPS Gold Coping

Stainless steel/Ti/Al/Elitor® 040.920C

Classic Set for Bonefit Implants with Internal Cone and 45° Shoulder, used approx. between 1991 and 1999

Classic Set, Octa Type Set includes:RN Implant Analog, SCS Guide Screw, Octa Impression Cap

Stainless steel/Ti/Al 040.922C

Classic Set for Type Octa, single part, used approx. between 1995 and 2004

Classic Set, Octa Type Set includes:RN Implant Analog, SCS Guide Screw, Octa Impression Cap

Stainless steel/Ti/Al 040.922C

Classic Set for Type 8° (later also Monotype), used approx. between 1994 and 2009

Classic Set, 8° type Set includes:Implant Analog for 8° Bar Head, SCS Occlusal Screw, length 4 mm, Impression Cap for 8° Bar Head, Implant Protective Cap for 8° Bar Head, Gold Coping

Stainless steel/Ti/Al/PEEK/Ceramicor®

040.921C

Manufacturer Diener AG Precision MachiningCH-8424 EmbrachSwitzerlandExclusively distributed by Institut Straumann AG, CH-4002 Basel, Switzerland


140

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


Components

Implant Type Narrow Neck (NN), in use approx. between 1998 and 2012



NN Impression Cap screw-retained, for open-tray impression, length 17.5 mm

Al/TAN 048.016

NNImplant Analog


048.130

Temporary Abutment

NN Temporary Coping including NN Occlusal Screw, height 10 mm PEEK/Ti 048.669

Gold Abutment

NN Gold Coping castable, without screw, height 10 mm, alloy weight 0.286 g

Ceramicor®/POM

048.635

Titanium Abutments

NN Post polishable, without screw, height 9 mm Ti 048.505

angled, angle 15°, without screw, height 8.8 mm 048.550

angled, angle 20°, without screw, height 8.8 mm 048.551

Protective Cap

NN Protective Cap with integral Occlusal Screw, height 3.4 mm PEEK/TAN 048.050

Screw

NN Occlusal Screw yellow, length 5 mm, threaded ∅ 1.8 mm TAN 049.177


141

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


Components and Tools

Additional Components for Straumann® Classic


Octa Abutment with integral Basal Screw, height 1.5 mm Ti 048.404C

Abutment, angled 15° with integral Basal Screw 048.483C

Abutment, angled 20° 048.484C

Plastic Coping for Abut-ment 8°

POM 048.220C

TS Gold Coping for Octa alloy weight 0.757 g Ceramicor® 048.232C

Transversal Screw for RN Transversal Screw Retention, length 3 mm, ∅ 2 mm

TAV 049.154

Occlusal Screw length 15 mm Ti 048.304C

TPS Occlusal Screw length 8 mm 048.312C

Pin Abutment castable Ceramicor® 048.424C

TS Posts for Octa Ti 048.448C


142

1250

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics


Components and Tools

Tools for Straumann® Classic

Product Image Material Art.-No.

Driver forOcta Abutments

Stainless steel 046.045C

Cross-tip Screwdriver 046.114C


143

HQ

/ 26

.12.

2015

/ En

glis

h

Pros

thet

ics

144

In the field of biomaterials, Strau-mann, in cooperation with botiss, offers a uniquely comprehensive portfolio for any possible indica-tion.

Biomaterials@Straumann® – when one option is not enough

The right solution in implantology and periodontology is designed to fit the individual. Predictable long-term results and perfect esthetic outcomes require adequate hard and soft tissue management – and the right product.Straumann offers an exceptional range of biomaterials to support implant and periodontal procedures, such as:• Bone substitute materials (xenografts, allografts, alloplasts/synthetics)• Collagen barrier membranes with different barrier functions• Soft tissue grafts• Haemostyptic collagen cones and fleeces• Enamel Matrix Derivatives (Straumann® Emdogain®)

145

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Biomaterials

Bone Substitutes 146Allografts 146

Synthetics 148

Xenografts 149

Collagen Products 150Membranes 150

Soft Tissue Grafts 151

Fleeces and Cones 152

Biologics 153Emdogain® 153

Instruments 154

146

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Bone SubstitutesAllografts

Allografts


Granules

maxgraft® cancellous donor: human, granule size: 500-2000 µm, unit size: 0.5 cc

Cancellous bone

BO-30005

donor: human, granule size: 500-2000 µm, unit size: 1.0 cc

BO-30010


BO-30020


BO-30040

maxgraft® corticocancellous


Cortical bone/Cancellous bone

BO-31005


BO-31010


BO-31020


BO-31040

Blocks

maxgraft® cancellous donor: human, block size: 10x10x10 mm Cancellous bone

BO-32111

donor: human, block size: 20x10x10 mm BO-32112

maxgraft® unicortical cancellous

donor: human, block size: 10x10x10 mm Cortical bone/Cancellous bone

BO-31111

donor: human, block size: 20x10x10 mm BO-31112

Rings

maxgraft® bonering donor: human, outer-∅ 6 mm, inner-∅ 3.3 mm, height 10 mm

Cancellous bone

BO-33160

donor: human, outer-∅ 7 mm, inner-∅ 3.3 mm, height 10 mm

BO-33170

donor: human, outer-∅ 7 mm, inner-∅ 4.1 mm, height 10 mm

BO-33174

147

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Bone SubstitutesAllografts

Allografts


Individualized Block

maxgraft® bonebuilder® individual planning and production of a bone transplant, max. dimension 23x13x13 mm, donor: hu-man

Cancellous bone

BO-PMIa

How to order a maxgraft® bonebuilder maxgraft® bonebuilder is an allogenic bone block which is individually designed for the patient’s bone defect. Our partner company, botiss, virtually designs the maxgraft® bonebuilder bone block using a CT/DVT-scan of the bone defect. The design of the bone block is only released for production after final inspection and approval of the clinician. The manufacturing site, Cells +Tissuebank Austria (C+TBA), receives the design file and the bone block is produced under cleanroom conditions. To place an order for maxgraft® bonebuilder, please log in at the botiss biomaterials homepage here. There you will get further instructions on how to upload your data, the order process and the expected delivery time. Your maxgraft® bonebuilder block will then be delivered to you and invoiced directly by botiss, on behalf of Straumann.

148

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Bone SubstitutesSynthetics

Synthetics


Granules

Straumann® BoneCeramic™ source: synthetic, granule size: 400-700 µm, unit size: 0.3 cc, 0.25 g

HA / β-TCP 070.203

source: synthetic, granule size: 500-1000 µm, unit size: 1.0 cc, 0.5 g

070.204

source: synthetic, granule size: 500-1000 µm, unit size: 1.9 cc, 1.0 g

070.205

Small Granules

maxresorb® source: synthetic, granule size: 500-1000 µm, unit size: 0.5 cc

HA / β-TCP BO-20005

source: synthetic, granule size: 500-1000 µm, unit size: 1.0 cc

BO-20010

Large Granules

maxresorb® source: synthetic, granule size: 800-1500 µm, unit size: 0.5 cc

HA / β-TCP BO-20105

source: synthetic, granule size: 800-1500 µm, unit size: 2.0 cc

BO-20120

Blocks

maxresorb® source: synthetic, block size: 20x10x10 mm HA / β-TCP BO-21211

source: synthetic, block size: 20x20x10 mm BO-21221

Paste

maxresorb® inject source: synthetic, unit size: 0.5 cc HA / β-TCP BO-22005

source: synthetic, unit size: 1.0 cc BO-22010

source: synthetic, unit size: 2.5 cc BO-22025

149

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Bone SubstitutesXenografts

Xenografts


Small Granules

cerabone® source: bovine, granule size: 500-1000 µm, unit size: 0.5 cc

HA BO-1510

source: bovine, granule size: 500-1000 µm, unit size: 1.0 cc

BO-1511


BO-1512


BO-1515

Large Granules

cerabone® source: bovine, granule size: 1000-2000 µm, unit size: 0.5 cc

HA BO-1520


BO-1521


BO-1522


BO-1525

Blocks

cerabone® source: bovine, block size: 20x20x10 mm HA BO-1720

150

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Collagen ProductsMembranes

Membranes


Membranes

Jason® membrane source: porcine pericard, membrane size: 15 x 20 mm, membrane thickness: 0.1 – 0.25 mm

Collagen BO-681520

source: porcine pericard, membrane size: 20 x 30 mm, membrane thickness: 0.1 – 0.25 mm

BO-682030

source: porcine pericard, membrane size: 30 x 40 mm, membrane thickness: 0.1 – 0.25 mm

BO-683040

Membranes

collprotect® membrane source: porcine dermis, membrane size: 15 x 20 mm, membrane thickness: 0.4 – 0.6 mm

Collagen BO-601520

source: porcine dermis, membrane size: 20 x 30 mm, membrane thickness: 0.4 – 0.6 mm

BO-602030

source: porcine dermis, membrane size: 30 x 40 mm, membrane thickness: 0.4 – 0.6 mm

BO-603040

151

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Collagen ProductsSoft Tissue Grafts

Soft Tissue Grafts


Soft Tissue Grafts

mucoderm® source: porcine dermis, size: 15 x 20 mm, thick-ness: 1.2 - 1.7 mm

Collagen BO-701520

source: porcine dermis, size: 20 x 30 mm, thick-ness: 1.2 - 1.7 mm

BO-702030

source: porcine dermis, size: 30 x 40 mm, thick-ness: 1.2 - 1.7 mm

BO-703040

152

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Collagen ProductsFleeces and Cones

Fleeces and Cones


Fleeces

Jason® fleece source: porcine dermis, size: 20 x 20 mm, thick-ness: 2.0 mm, resorption time: 2-4 weeks, packa-ging 12 pieces

Collagen BO-690412

source: porcine dermis, size: 50 x 50 mm, thick-ness: 2.0 mm, resorption time: 2-4 weeks, packa-ging 10 pieces

BO-692510

Jason® G fleece source: porcine dermis, size: 25 x 25 mm, thick-ness: 2.2 mm, resorption time: 2-4 weeks, packa-ging 12 pieces

Collagen/Gentamicin

BO-600612

Cones

collacone® source: porcine dermis, resorption time: 2-4 weeks, packaging 12 pieces

Collagen BO-511112

153

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

BiologicsEmdogain®

Emdogain®


Emdogain®

Straumann® Emdogain® 0.3 ml

1 x Straumann® Emdogain® 0.3 ml Enamel Matrix Derivative (EMD)

075.101


1 x Straumann® Emdogain® 0.7 ml 075.102

Emdogain® Multipack


5 x Straumann® Emdogain® 0.15 ml Enamel Matrix Derivative (EMD)

075.098

Straumann® Emdogain®0.3 ml Multipack

3 x Straumann® Emdogain® 0.3 ml3 x Straumann® PrefGel® 0.6 ml

Enamel Matrix Derivative (EMD)/Ethylenedia-minetetraa-cetic acid (EDTA)

075.114

Straumann® Emdogain®0.7 ml Multipack

3 x Straumann® Emdogain® 0.7 ml3 x Straumann® PrefGel® 0.6 ml

075.116

Emdogain® PLUS

Straumann® Emdogain® PLUS

1 x Straumann® Emdogain® 0.7 ml1 x Straumann® BoneCeramic™400 – 700 μm, 0.25 g1 x Straumann® PrefGel® 0.6 ml

Enamel Matrix Derivative (EMD)/Ethylenedia-minetetraa-cetic acid (EDTA)/HA / β-TCP

075.117

PrefGel®

Straumann® PrefGel®0.6 ml

5 x Straumann® PrefGel® 0.6 ml Ethylenedia-minetetraa-cetic acid (EDTA)

075.203

154

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Instruments

Bone Block Fixation Instruments


Basic Set

Straumann® Bone BlockFixation Cassette

cassette for Drills, Mini-screws and Screwdriver for Bone Block Fixation, length 130 mm, width 118 mm, height 25 mm

Thermopla-stic

041.032

Glide Hole Drill length 37 mm, stop 20 mm, ∅ 1.5 mm Stainless steel

044.125

Residual Ridge Drill length 37 mm, stop 16 mm, ∅ 1.25 mm 044.126

Crosshead Implant Screw length 8 mm, ∅ 1.5 mm, packaging 5 pieces Ti 042.700V5

Crosshead Implant Screw length 10 mm, ∅ 1.5 mm, packaging 5 pieces 042.701V5



Screwdriver complete, with Screwdriver Blade and Screw-holding Device for Implant Screws, crosshead ∅ 1.5 mm, length 160 mm

Al/Stainless steel

040.360

Spare Parts

Screwdriver Blade for Implant Screws, crosshead ∅ 1.5 mm, length 69 mm

Stainless steel

046.256

Screw-holding Device for Screwdriver Blade 046.256, length 45 mm 046.257

Screwdriver Handle for Screwdriver Blade 046.256, length 100 mm Al/Stainless steel

046.258

155

HQ

/ 26

.12.

2015

/ En

glis

h

Biom

ater

ials

Instruments

Bonering Surgical Instruments


Surgical Kit

maxgraft® bonering surgical kit

instrument tray complete with all instruments for the bonering surgical technique

Stainless steel

BO-33000

Instruments for Surgical Kit

Pilot Drill ∅ 2 mm outer-∅ 2 mm Stainless steel

BO-33001

Trephine 6 mm outer-∅ 6 mm BO-33002

Trephine 7 mm outer-∅ 7 mm BO-33003

Planator 6 mm outer-∅ 6 mm BO-33006

Planator 7 mm outer-∅ 7 mm BO-33007

Diamond Tulip BO-33004

Diamond Disc BO-33005

bonering Fix BO-33010

Instrument Tray and Rack

Instrument Tray maxgraft® bonering

tray for maxgraft® bonering instruments, empty, length 135 mm, width 177 mm, height 39 mm

Stainless steel

BO-33009

Instrument Rack rack for maxgraft® bonering instruments for 12 instruments with shaft, length 25 mm, height 51 mm, width 60 mm

BO-33008

156

Straumann® CARES® encompasses hardware, software and services for high-quality, customized CAD-CAM prosthetics – offering a wide range of materials and applica-tions. Connectivity between surgi-cal planning CADCAM software opens new design opportunities for customized esthetics.

The digital workflow: Streamline your workflow and improve the predictability of your results

Digitalization is having a major impact on the world of dentistry and dental technology, bringing with it a host of new applications and processes that are fundamentally changing the way treatment is designed. New software and hardware products can increase innovation and efficiency in dental laboratories, while the production of laboratory products can become increasingly decentralized. These trends call for busi-ness models to be adjusted to meet growing patient expectations.

Note:* Straumann® CARES® solutions are available in selected countries. Please contact your local Straumann sales representative for further information.

157

HQ

/ 26

.12.

2015

/ En

glis

h

CAD

CAM

CADCAM

CADCAM 158

158

HQ

/ 26

.12.

2015

/ En

glis

h

CAD

CAM

CADCAM

Straumann® CARES® SystemStraumann® CARES® System

The new Straumann® CARES® CADCAM Scanner portfolio com-bines the well-established technology of previous models with key improvements in ergonomics and function. Designed for re-liability and to meet production demands in high-throughput environments, our scanners offer exceptional versatility, speed and precision. The integrated processing unit ensures that all programs involved communicate seamlessly and fluidly with each other.

The Straumann® CARES® Visual Design software is a complete CADCAM software system that allows access to a wide range of services and solutions. For instance, Straumann® CARES® X-Stream™ enables an optimized workflow for prosthetic treat-ments with Straumann implants. This „1 scan – 1 design“ solu-tion not only significantly reduces the time required, but also the associated costs – individual esthetics in a single step.

In 2016 you can look forward to new milestones in scanning, milling and the choice of materials. Discover n!ce™, the newly developed glass ceramic material from Straumann. Its final, ful-ly-crystallized material properties allow it to be easily and conve-niently milled and polished. It is then ready for „n!ce“ and easy application. Straumann® CARES® – more flexible than ever!

159

HQ

/ 26

.12.

2015

/ En

glis

h

CAD

CAM

CADCAM

Straumann® CARES® Individualized ProstheticsStraumann® CARES® Individualized Prosthetics

* Straumann® CARES® solutions are available in selected countries. Please contact your local Strau-mann sales representative for further information.

With Straumann® CARES® CADCAM you can scan, design and or-der customized prosthetics directly from our milling centers. If you do not have access to the necessary hardware, you can also order your customized prosthetics at our Straumann® CARES® Scan & Shape Service.

Comprehensive product portfolioOur comprehensive portfolio has a suitable solution for every case – including single step treatments, customized secondary parts, screw-retained bridges and bars and full-contour crowns and bridges.

Leading range of materials and applicationsStraumann® CARES® CADCAM has an extensive material port-

folio to offer patients and the treatment team a wide range of options. All dental material types can be processed and give you the flexibility you need to meet customer demands.

Precision, implant-bearing treatments with original connectionsImplant-borne treatments from Straumann, used in combina-tion with original Straumann implants, are designed to demon-strate the best possible properties at the implant-to-abutment interface – and thus the entire treatment.

Straumann abutment connections and implants are designed and constructed to ensure the harmonized interaction of de-sign (shape and properties), tolerances, surface qualities and materials.

160

HQ

/ 26

.12.

2015

/ En

glis

h

CAD

CAM

CADCAM

ConnectivityConnectivity

Reduce complexity – through connectivityStraumann offers further connectivity for guided surgery and CADCAM systems – as well as the necessary equipment, mate-rials and services.

Customized esthetics in a single stepThe synergies between the planning software coDiagnostiX® and CARES® Visual open a whole new world of opportunities in prosthetically driven implant treatments.

Straumann® CARES®• Innovative, flexible and sustainable solutions• Access to the entire digital workflow• Increased efficiency with fewer process steps, shorter turn-

over time and thus reduced associated costs

1.DVT image without

X-ray template → first intraoral scan

3.Guided surgery → second intraoral

scan and immediate, provisional CADCAM

treatment

5.Final prosthetic

CADCAM rehabili-tation

2.Surgical and prosthetic

planning in 3D → printing the drilling

template and produc-ing the immediate,

provisional CADCAM treatment

4.Planning the final

prosthetic CADCAM rehabilitation

161

HQ

/ 26

.12.

2015

/ En

glis

h

CAD

CAM

162

In this chapter you will find a com-prehensive list of instruments and accessories for implants and pros-thetic treatments.

More than just accessories: the basis of flawless execution

On the following pages, you will find all the important instruments and demonstration materials that complement the Straumann surgical and prosthetics portfolio, from drills and surgical cassettes to pros-thetic auxiliary parts, screws and storage systems.

163

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

Instruments and Accessories

Surgery 164Planning Aids 164

Implant Bed Preparation Instruments 165

Instruments and Tools 171

Guided Surgery 173

Explantation 177

Bone Block Fixation 1.5 mm 180

Osteotomes 181

Storage Systems 183

Prosthetics 184Prosthetic Tools 184

Storage Systems and Cassettes 187

Prosthetic Planning Aids 189

Screws for Prosthetics 190

Demonstration Materials 192

164

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryPlanning Aids

Planning Aids


X-ray Reference Sphere

X-ray Reference Sphere ∅ 5 mm, packaging 4 pieces, for single use Stainless steel

049.076V4

X-ray Templates

X-ray Templates for Standard, Standard Plus and Straumann® PURE Ceramic Implants

Plastic 150.215

for Tapered Effect Implants 150.230

for Bone Level Implants 150.216

Instruments and Distance Indicators

Diagnostic T auxiliary instrument for diagnosis, length 65 mm, width 33 mm

Ti 046.147

ImplantDistance Indicator forStandard, Standard Plusand Tapered Effect

length 100 mm Ti/Stainless steel

046.148

Bone Level ImplantDistance Indicator

026.0901

165

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryImplant Bed Preparation Instruments

Single-Patient Drills (Drill-stop Incompatible)


Single-patient Drills

Drill Set short, incompatible with Drill Stop, for ∅ 3.3 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8 mm

Stainless steel

040.400S

long, incompatible with Drill Stop, for ∅ 3.3 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8 mm

040.401S

short, incompatible with Drill Stop, for ∅ 4.1 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8/3.5 mm

040.403S

long, incompatible with Drill Stop, for ∅ 4.1 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8/3.5 mm

040.404S

short, incompatible with Drill Stop, for ∅ 4.8 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8/3.5/4.2 mm

040.406S

long, incompatible with Drill Stop, for ∅ 4.8 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8/3.5/4.2 mm

040.407S

Single-Patient Drills (Drill-stop Compatible)


Single-patient Drills

Drill Set short, Drill Stop compatible, for ∅ 3.3 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8 mm

Stainless steel

040.440S

long, Drill Stop compatible, for ∅ 3.3 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8 mm

040.441S

short, Drill Stop compatible, for ∅ 4.1 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8/3.5 mm

040.443S

long, Drill Stop compatible, for ∅ 4.1 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8/3.5 mm

040.444S

short, Drill Stop compatible, for ∅ 4.8 mm Implants, single-patient use, sterile, length 33 mm, ∅ 2.2/2.8/3.5/4.2 mm

040.446S

long, Drill Stop compatible, for ∅ 4.8 mm Implants, single-patient use, sterile, length 41 mm, ∅ 2.2/2.8/3.5/4.2 mm

040.447S

166

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryImplant Bed Preparation Instruments

Drill Stop Kit


Drill Stop Kit 3 x Drill Stop Set, type A,3 x Drill Stop Set, type B,3 x Drill Stop Set, type C,3 x Drill Stop Set, type D,1 x Drill Stop Aid

Plastic 040.460

Refill package:Drill Stop Kit

type A, for short Drill 12 mm/long Drill 16 mm, ∅ 3.3/4.1/4.8 mm Implants

040.454S

type B, for short Drill 10 mm/long Drill 14 mm, ∅ 3.3/4.1/4.8 mm Implants

040.455S

type C, for short Drill 8 mm/long Drill 12 mm, ∅ 3.3/4.1/4.8 mm Implants

040.456S

type D, for short Drill 6 mm/long Drill 10 mm, ∅ 3.3/4.1/4.8 mm Implants

040.457S

Drill Stop Aid Drill Stop Aid 040.461

167

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s



Burs


Round Burs

Round Bur ∅ 1.4 mm Stainless steel

044.022

∅ 2.3 mm 044.003

∅ 3.1 mm 044.004

Pilot Drills


Pilot Drills

Pilot Drill 1 short, length 33 mm, ∅ 2.2 mm Stainless steel

044.210

long, length 41 mm, ∅ 2.2 mm 044.211

Pilot Drill 2 short, length 33 mm, ∅ 2.8 mm 044.214

long, length 41 mm, ∅ 2.8 mm 044.215

Pilot Drills for Bone Level Tapered

BLT Pilot Drill short, length 33 mm, ∅ 2.2 mm Stainless steel

026.0001

BLT Pilot Drill long, length 41 mm, ∅ 2.2 mm 026.0002

Twist Drills


Twist Drills

Twist Drill PRO short, length 33 mm, ∅ 3.5 mm Stainless steel

044.250

long, length 41 mm, ∅ 3.5 mm 044.251

short, length 33 mm, ∅ 4.2 mm 044.254

long, length 41 mm, ∅ 4.2 mm 044.255

168

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie


BLT Drills


Drill for Bone Level Tapered

BLT Drill short, length 33 mm, ∅ 2.8 mm Stainless steel

026.2200

long, length 41 mm, ∅ 2.8 mm 026.2201


long, length 41 mm, ∅ 3.5 mm 026.4201

BLT Drill short, length 33 mm, ∅ 4.2 mm Stainless steel

026.6200

long, length 41 mm, ∅ 4.2 mm 026.6201

Profile Drills


Profile Drills for Standard Plus

SP Profile Drill short, length 25 mm, ∅ 2.8 mm Stainless steel

044.086

long, length 34 mm, ∅ 2.8 mm 044.087


long, length 34 mm, ∅ 3.5 mm 044.089


long, length 34 mm, ∅ 4.2 mm 044.085

Profile Drills for Tapered Effect

TE Profile Drill short, length 28 mm, ∅ 2.8 mm Stainless steel

044.701

long, length 37 mm, ∅ 2.8 mm 044.708


long, length 37 mm, ∅ 3.5 mm 044.712


long, length 37 mm, ∅ 4.2 mm 044.710

Profile Drills for Bone Level, NNC and Straumann® PURE Ceramic Implants

BL/NNC Profile Drill short, length 26 mm, ∅ 3.3 mm Stainless steel

026.2303

long, length 35 mm, ∅ 3.3 mm 026.2306

BL Profile Drill short, length 26 mm, ∅ 4.1 mm 026.4303

long, length 35 mm, ∅ 4.1 mm 026.4306


long, length 35 mm, ∅ 4.8 mm 026.6306

169

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s


Profile Drills


Profile Drills for Bone Level Tapered

BLT Profile Drill short, length 25 mm, ∅ 3.3 mm Stainless steel

026.0003

long, length 33 mm, ∅ 3.3 mm 026.0004


long, length 33 mm, ∅ 4.1 mm 026.0006


long, length 33 mm, ∅ 4.8 mm 026.0008

Taps


Taps for Narrow Neck CrossFit®

BL/TE/NNC Tap for Adapter, length 23 mm, ∅ 3.3 mm Stainless steel/TAN

026.2310

Taps for Standard/Standard Plus

S/SP Tap for Adapter, length 23 mm, ∅ 3.3 mm Stainless steel/TAN

044.575

S/SP Tap for Adapter, length 23 mm, ∅ 4.1 mm 044.577

S/SP Tap for Adapter, length 23 mm, ∅ 4.8 mm 044.579

Taps for Bone Level, Tapered Effect and Straumann® PURE Ceramic Implants

BL/TE/NNC Tap for Adapter, length 23 mm, ∅ 3.3 mm Stainless steel/TAN

026.2310

BL/TE Tap for Adapter, length 23 mm, ∅ 4.1 mm 026.4310

for Adapter, length 23 mm, ∅ 4.8 mm 026.6310

Taps for Bone Level Tapered

BLT Tap length 25 mm, ∅ 3.3 mm Stainless steel/TAN

026.0009

length 25 mm, ∅ 4.1 mm 026.0010

length 25 mm, ∅ 4.8 mm 026.0011

170

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie


Alignment Pins and Depth Gauges


Alignment Pins and Depth Gauges for Bone Level Tapered

BLT Alignment Pin length 27 mm, ∅ 2.2 mm Ti 046.703

BLT Depth Gauge with Distance Indicator

length 27 mm, ∅ 2.2/2.8 mm 046.704

BLT Depth Gauge length 27 mm, ∅ 2.8 mm 046.705

length 27 mm, ∅ 3.5 mm 046.706

length 27 mm, ∅ 4.2 mm 046.707

Bone Profilers


Bone Profilers for Tissue Level

RN Bone Profiler for use with 049.082, inner-∅ 3.6/4.8 mm, ou-ter-∅ 5.4 mm, length 28 mm

Stainless steel

044.304

WN Bone Profiler for use with 049.082, inner-∅ 3.6/6.5 mm, ou-ter-∅ 7.2 mm, length 25 mm

044.305

SCS Guiding Cylinder for Implants ∅ 3.3 mm, length 10.5 mm, ∅ 3.6 mm 049.082

Bone Profilers for Bone Level

BL Bone Profiler 1 length 23 mm, ∅ 5.2 mm Stainless steel

026.0022

BL Bone Profiler 2 length 23 mm, ∅ 6.6 mm 026.0023

BL Bone Profiler 3 length 23 mm, ∅ 6 mm 026.0024

NC Guiding Cylinder for BL Bone Profiler, length 12.5 mm, ∅ 3.25 mm TAN 026.0025S

RC Guiding Cylinder for BL Bone Profiler, length 12.5 mm, ∅ 3.7 mm 026.0026S

171

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryInstruments and Tools

Surgical Cassettes


Straumann® SurgicalCassette

length 290 mm, width 175 mm, height 62 mm Plastic 040.165

Straumann® BasicSurgical Cassette

040.564

Auxiliary Instruments


Tweezers

Instrument Tweezers length 140 mm Stainless steel

046.110

Tweezers with titanium plasma-coated tips, length 105 mm Stainless steel/Ti

046.095

without titanium plasma-coated tips, length 105 mm Stainless steel

046.057

Instruments

Ratchet including Service Instruments, length 84 mm Stainless steel

046.119

Torque Control Device for Ratchet, length 82 mm 046.049

Holding Key length 85 mm 046.064

Service Instrument for Ratchet, length 50 mm 046.108

Cleaning Brush for Ratchet, length 100 mm, ∅ 4.5 mm, packa-ging 4 pieces

Stainless steel/Nylon

045.111V4

Release Aid N forLoxim™

for platforms NC and NNC, length 90 mm Stainless steel

026.2558

Release Aid R/W forLoxim™

for platforms RC, RN and WN, length 90 mm 026.4558

172

0086H

Q /

26.1

2.20

15 /

Engl

ish

Inst

rum

ents

and

Ac

cess

orie

sSurgeryInstruments and Tools



Adapters

Adapter for Ratchet, extra short, length 11 mm Stainless steel

046.460



for handpiece, extra short, length 19 mm 046.470

for handpiece, short, length 26 mm 046.471

for handpiece, long, length 34 mm 046.472

Screwdrivers


046.400



for handpiece, extra-short, length 20 mm 046.410



Hexagonal Screwdriver length 30 mm 046.421

Miscellaneous Auxiliary Instruments

Light Curette forImplants

packaging 5 pieces Plastic 045.921

Manufacturer Kerr Hawe SAZona StrecceCH-6934 BioggioSwitzerland

173

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryGuided Surgery

Guided Surgery Templates


Sleeves for Straumann® Guided Surgery

T-Sleeve guided, height 5 mm, ∅ 5 mm, packaging 4 pieces Stainless steel

034.053V4

guided, height 6 mm, ∅ 2.8 mm, packaging 4 pieces 034.055V4

Implant Bed Preparation Instruments


Guided Mucosa Punches

Mucosa Punch guided, length 30 mm, ∅ 3.4 mm Stainless steel

034.010

guided, length 30 mm, ∅ 4 mm 034.011

guided, length 30 mm, ∅ 4.7 mm 034.012

Guided Milling Cutters

Milling Cutter guided, length 32.5 mm, ∅ 2.8 mm Stainless steel

034.215

guided, length 32.5 mm, ∅ 3.5 mm 034.415

guided, length 32.5 mm, ∅ 4.2 mm 034.615

Guided Pilot Drills

Pilot Drill short, guided, length 32 mm, ∅ 2.2 mm Stainless steel

034.123

long, guided, length 36 mm, ∅ 2.2 mm 034.126

extra-long, guided, length 40 mm, ∅ 2.2 mm 034.129

BLT Pilot Drill short, guided, length 33.4 mm, ∅ 2.2 mm 034.257

medium, guided, length 37.4 mm, ∅ 2.2 mm 034.258

long, guided, length 41.4 mm, ∅ 2.2 mm 034.259

Guided Twist Drills

Twist Drill PRO short, guided, length 32 mm, ∅ 2.8 mm Stainless steel

034.223



short, guided, length 32 mm, ∅ 3.5 mm 034.423



short, guided, length 32 mm, ∅ 4.2 mm 034.623



174

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryGuided Surgery

Implant Bed Preparation Instruments


Guided BLT Drills

BLT Drill short, guided, length 33.4 mm, ∅ 2.8 mm Stainless steel

034.260



short, guided, length 33.4 mm, ∅ 3.5 mm 034.263



short, guided, length 33.4 mm, ∅ 4.2 mm 034.266



Guided Profile Drills

SP Profile Drill guided, length 35 mm, ∅ 3.3 mm Stainless steel

034.235

TE Profile Drill guided, length 37 mm, ∅ 3.3 mm 034.237

BL/NNC Profile Drill 026.2503

SP Profile Drill guided, length 35 mm, ∅ 4.1 mm 034.435

TE Profile Drill guided, length 37 mm, ∅ 4.1 mm 034.437

BL Profile Drill 026.4503


BLT Profile Drill guided, length 36 mm, ∅ 3.3 mm 034.269



Guided Taps

S/SP Tap for handpiece, guided, length 42 mm, ∅ 3.3 mm Stainless steel

034.245

BL/TE/NNC Tap 026.2510

S/SP Tap for handpiece, guided, length 42 mm, ∅ 4.1 mm 034.445

BL/TE Tap 026.4510

S/SP Tap for handpiece, guided, length 42 mm, ∅ 4.8 mm 034.645

BL/TE Tap 026.6510

BLT Tap guided, length 42 mm, ∅ 3.3 mm 034.272



175

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s





Drill Handle

Drill Handle Stop 1/3 mm, ∅ 2.2 mm, length 104 mm Stainless steel

034.150

Stop 1/3 mm, ∅ 2.8 mm, length 104 mm 034.250



C-Handle H2 Stop 6 mm, length 89 mm 034.750



Template Fixation Pin guided, ∅ 2.8/2.8 mm 034.256

guided, ∅ 5/2.8 mm 034.255

guided, ∅ 5/3.5 mm 034.455

guided, ∅ 5/4.2 mm 034.655

Connector for Ratchet, length 14 mm 034.005

Stop Key

Stop Key Stainless steel

034.006

176

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryGuided Surgery

Guided Surgery Cassette


Straumann® Guided Surgery Cassette

for Straumann® Guided Surgery, length 290 mm, width 175 mm, height 62 mm

Plastic 034.001

Straumann® Basic Guided Surgery Cassette

034.281

177

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryExplantation

Explantation Drills


Explantation Drill for Implant ∅ 3.3

Explantation Drill short, for Implants ∅ 3.3 mm and ∅ 3.5 mm, length 32 mm, inner-∅ 3.6 mm, outer-∅ 4.2 mm

Stainless steel

044.330

medium, for Implants ∅ 3.3 mm and ∅ 3.5 mm, length 37.5 mm, inner-∅ 3.6 mm, outer-∅ 4.2 mm

044.331

long, for Implants ∅ 3.3 mm and ∅ 3.5 mm, length 40.5 mm, inner-∅ 3.6 mm, outer-∅ 4.2 mm

044.332


Explantation Drill short, for Implants ∅ 4.1 mm, length 32 mm, inner-∅ 4.2 mm, outer-∅ 4.8 mm

Stainless steel

044.340

medium, for Implants ∅ 4.1 mm, length 37.5 mm, inner-∅ 4.2 mm, outer-∅ 4.8 mm

044.341

long, for Implants ∅ 4.1 mm, length 40.5 mm, inner-∅ 4.2 mm, outer-∅ 4.8 mm

044.342


Explantation Drill short, for Implants ∅ 4.8 mm, length 32 mm, inner-∅ 4.9 mm, outer-∅ 5.5 mm

Stainless steel

044.344

medium, for Implants ∅ 4.8 mm, length 37.5 mm, inner-∅ 4.9 mm, outer-∅ 5.5 mm

044.345

long, for Implants ∅ 4.8 mm, length 40.5 mm, inner-∅ 4.9 mm, outer-∅ 5.5 mm

044.346

178

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryExplantation

Explantation Aids


Explantation of Bone Level Implants without Abutment

NC Guiding Cylinder for explantation of ∅ 3.3 mm Bone Level Implants, length 10.7 mm, ∅ 3.6 mm

Stainless steel

026.2801

RC Guiding Cylinder for explantation of ∅ 4.1 mm Bone Level Implants, length 10.9 mm, ∅ 4.2 mm

026.4801

for explantation of ∅ 4.8 mm Bone Level Implants, length 10.9 mm, ∅ 4.9 mm

026.6801

Explantation of S/SP/TE Implants without Abutment

SCS Guiding Cylinder for Implants ∅ 3.3 mm Narrow Neck, length 5 mm, ∅ 3.6 mm

Ti/Stainless steel

049.182

for Implants ∅ 3.3 mm Narrow Neck CrossFit®, length 10.1 mm, ∅ 3.6 mm

Stainless steel

049.360

for Implants ∅ 3.3 mm, length 10.5 mm, ∅ 3.6 mm 049.082



Explantation of S/SP/TE Implants with Abutment

RN Guiding Sleeve for Implants ∅ 3.3 mm, cement-retained and screw-retained, without matching screw 048.350, length 4.5 mm, ∅ 3.6 mm

Stainless steel

049.850

for Implants ∅ 4.1 mm and ∅ 3.5 mm, cement-re-tained and screw-retained, without matching screw 048.350, length 5.6 mm, ∅ 4.2 mm

049.071

for Implants ∅ 4.8 mm, cement-retained and screw-retained, without matching screw 049.181, length 6.4 mm, ∅ 4.9 mm

049.851


Ti 048.350

for RN/WN Titanium Alloy Temporary Abutment, length 7.6 mm

TAN 049.181

179

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryExplantation

SurgeryExplantation

Explantation Devices


48hExplantation Device

for Bone Level NC Implants, length 31.4 mm, ∅ 8 mm Stainless steel

026.2048

for Bone Level RC Implants, length 31.2 mm, ∅ 8 mm 026.4048

for Soft Tissue Level NNC Implants, length 31.4 mm, ∅ 8 mm

049.361

for Soft Tissue Level RN/WN synOcta® Implants, short, length 20.6 mm, ∅ 8 mm

80103

for Soft Tissue Level RN/WN synOcta® Implants, long, length 26.6 mm, ∅ 8 mm

80087

48hExplantation Device

for RD Straumann® PURE Ceramic Implant (Monotype), length 19.7 mm

031.080

for ND Straumann® PURE Ceramic Implant (Monoty-pe), length 19.8 mm

031.081

180

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryBone Block Fixation 1.5 mm

Bone Block Fixation


Basic Set

Straumann® Bone BlockFixation Cassette

cassette for Drills, Mini-screws and Screwdriver for Bone Block Fixation, length 130 mm, width 118 mm, height 25 mm

Thermopla-stic

041.032

Glide Hole Drill length 37 mm, stop 20 mm, ∅ 1.5 mm Stainless steel

044.125

Residual Ridge Drill length 37 mm, stop 16 mm, ∅ 1.25 mm 044.126

Crosshead Implant Screw length 8 mm, ∅ 1.5 mm, packaging 5 pieces Ti 042.700V5




Screwdriver complete, with Screwdriver Blade and Screw-holding Device for Implant Screws, crosshead ∅ 1.5 mm, length 160 mm

Al/Stainless steel

040.360

Spare Parts

Screwdriver Blade for Implant Screws, crosshead ∅ 1.5 mm, length 69 mm

Stainless steel

046.256

Screw-holding Device for Screwdriver Blade 046.256, length 45 mm 046.257

Screwdriver Handle for Screwdriver Blade 046.256, length 100 mm Al/Stainless steel

046.258

181

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryOsteotomes

Osteotome for Bone Condensation


Osteotome Instrument Kit for Bone Condensation

with content Stainless steel/Plastic

040.500

Cassette for Bone Condensation Osteotomes

without content 040.550

Osteotome straight, for bone condensation, ∅ 2.2 mm Stainless steel

046.500

straight, for bone condensation, ∅ 2.8 mm 046.501



angled, for bone condensation, ∅ 2.2 mm 046.510




Depth Stop for Osteotomes, ∅ 2.2 mm Ti/Stainless steel

046.550

for Osteotomes, ∅ 2.8 mm 046.551




Ti 048.350


182

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sSurgeryOsteotomes

Osteotome for Sinus Floor Elevation


Osteotome Instrument Kit for partial sinus floor elevation Stainless steel/Plastic

040.501

Cassette for Sinus FloorElevation Osteotomes

without content 040.560

Osteotome straight, for sinus floor elevation, ∅ 2.8 mm Stainless steel

046.521

straight, for sinus floor elevation, ∅ 3.5 mm 046.522

straight, for sinus floor elevation, ∅ 4.2 mm 046.523

angled, for sinus floor elevation, ∅ 2.8 mm 046.531



Depth Stop for Osteotomes, ∅ 2.8 mm Ti/Stainless steel

046.551




Ti 048.350


183

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

SurgeryStorage Systems

Storage System


Storage System

Storage System for implantology, including drawers and dividers, length 226 mm, width 280 mm, height 248 mm

PS 041.500

Replacement Drawers and Divider

Drawer forStorage System

high, without separator, length 282 mm, width 220 mm

Plastic 041.520

Divider Panel Set separators for implantology, length 184 mm, height 44 mm, packaging 5 pieces

041.530V5

Cassettes


Ultrasonic CleaningCassette

Ultrasonic Cleaning Cassette, length 150 mm, width 65 mm, height 25 mm

Plastic/Silicone

040.175

184

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sProstheticsProsthetic Tools

Prosthetic Tools


Tool

Ratchet including Service Instruments, length 84 mm Stainless steel

046.119

Torque Control Device for Ratchet, length 82 mm 046.049

Service Instrument for Ratchet, length 50 mm 046.108

Cleaning Brush for Ratchet, length 100 mm, ∅ 4.5 mm, packa-ging 4 pieces

Stainless steel/Nylon

045.111V4

SCS Screwdriver


046.400



for handpiece, extra-short, length 20 mm 046.410



Screwdriver Handle for 046.410/411/412, length 109 mm Stainless steel/PEEK

046.085

Tool for Anchor

Retentive AnchorDriver


046.069

Screwdriver for Lamella Retention Insert, length 37 mm 046.154

for Titanium Matrix, length 50 mm 048.452

Driver for Solid Abutments

NNC Solid AbutmentDriver

short, length 13 mm Stainless steel

048.155

long, length 19 mm 048.156

Inserting Device for RN Solid Abutment, 6°, short, length 13 mm 046.067

for RN Solid Abutment, 6°, long, length 19 mm 046.068

Tool for LOCATOR®


046.415



185

0086

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

ProstheticsProsthetic Tools

Prosthetic Tools


Reamer

NNC Reamer for 45° shoulder, length 17 mm, ∅ 8 mm Stainless steel/Ti-N

046.237

RN/WN Reamer for 45° shoulder, ∅ 8 mm 046.243

Guide Pin for Reamer 046.243, for RN, synOcta® 048.605, length 50 mm

Stainless steel

046.246

for Reamer 046.243, for RN/WN synOcta® 1.5 Abutments, length 50 mm

046.241

for Reamer 046.243, for WN synOcta® 048.606, length 50 mm

046.247

for Reamer 046.243, for RN, Solid Abutments, length 50 mm

046.242

for Reamer 046.243, for WN Solid Abutments, length 50 mm

046.244

NNC Guide Pin for Reamer 046.237, for Solid Abutments, length 53 mm

046.249

Handle for Reamers and Tap for TS, length 65 mm Steel/Brass 046.240


186

1250

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sProstheticsProsthetic ToolsProstheticsProsthetic Tools

Prosthetic Tools


Taps

Taps for TS Screw Retention M2 x 0.25 mm Stainless steel

044.570

Tools for Straumann® Classic

Driver forOcta Abutments

Stainless steel

046.045C

Cross-tip Screwdriver 046.114C

Tool for Bar


046.150


046.151


Handle

Analog Holder length 105 mm Al/Steel 046.239


187

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

ProstheticsStorage Systems and Cassettes

Storage System


Storage System

Storage System for prosthetics including drawers and dividers, length 226 mm, width 280 mm, height 248 mm

PS 041.501

Replacement Drawers and Divider

Drawer forStorage System

Organization, length 282 mm, width 220 mm Plastic 041.522

deep, without separators, length 282 mm, width 220 mm

041.521

high, without separator, length 282 mm, width 220 mm

041.520

Divider Panel separators for prosthetics, length 249 mm, height 30 mm

041.531

188

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sProstheticsStorage Systems and Cassettes

Cassettes


Prosthetic Cassette for instruments and auxiliary components, complete (without dividers), length 224 mm, width 115 mm, height 20 mm

Anodized Al 040.185

for instruments and auxiliary components, length 224 mm, width 115 mm, height 20 mm

041.022

Tray for 041.022, length 218 mm, width 109 mm, height 16 mm

041.211

Divider Panel large, for 041.440, length 47.5 mm, width 9.5 mm, height 1 mm

041.612

small, for 041.440, length 27.5 mm, width 9.5 mm, height 1 mm

041.615

Dish for 041.211, length 56 mm, width 31 mm, height 11 mm

041.440

Calibration Cup yellow, ∅ 80 mm 041.412

Plexiglass Cassette/Membranette

length 150 mm, width 100 mm Plastic 140.055

189

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

ProstheticsProsthetic Planning Aids

Prosthetic Planning Aids


X-ray Reference Sphere

X-ray Reference Sphere ∅ 5 mm, packaging 4 pieces, for single use Stainless steel

049.076V4

Components for Fabricating an Individual Drill Template

Drill Sleeve with Collar length 10 mm, inner-∅ 2.4 mm, outer-∅ 3.5 mm, packaging 4 pieces

Ti 049.810V4

Stepped Pin for 049.810V4, length 16 mm, ∅ 2.2/3.5 mm, packaging 4 pieces

049.818V4

Pin for 049.810V4, length 16 mm, ∅ 2.2 mm, packa-ging 4 pieces

049.816V4

for 049.810V4, length 10 mm, ∅ 2.2 mm, packa-ging 4 pieces

049.817V4

for 049.810V4, length 16 mm, ∅ 3.5 mm, packa-ging 4 pieces

049.819V4

190

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sProstheticsScrews for Prosthetics

Screws for Prosthetics


NNC


TAN 048.313

for NNC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.1 mm

048.314

RN and WN


Ti 048.350


RN Occlusal Screw for customized RN Zirconia Abutments, CARES®, CADCAM, length 5 mm

TAN 048.354

packaging 4 pieces TAN 048.354V4


TAN 048.356


049.181

SCS Guide Screw for occlusal screw-retained RN/WN Copings, cannot be shortened, length 6 mm, packaging 4 pieces

Ti 048.360V4

for occlusal screw-retained RN/WN Copings, can be shortened by 1.6 mm, length 6 mm, packaging 4 pieces

048.361V4

for occlusal screw-retained RN/WN Copings, cannot be shortened, length 8 mm, packaging 4 pieces

048.362V4


048.363V4


048.364V4


048.365V4


048.366V4

191

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

ProstheticsScrews for Prosthetics

Screws for Prosthetics


NC and RC


TAN 025.2900


025.2906

for NC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, length 7.9 mm

025.2908


025.4900

for RC IPS e.max® Anatomic Abutments and CARES® Zirconia Abutments, length 8.2 mm

025.4906

for RC Gold Abutments, for bridges, length 8.3 mm 025.4902

for RC Cementable Abutments and Temporary Abutment VITA CAD-Temp®, for Cementable Abut-ments only, length 7.9 mm

025.4908



025.2926


023.4749


023.4750


023.4760


023.4763

NC/RC Screw for NC/RC Screw-retained Abutments 17° and 30°, length 7.2 mm

025.0002

192

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

sProstheticsDemonstration Materials

Models at Scale 5:1

Product Image Description Art.-No.

Straumann® Standard Plus NNC Implant

includes: NNC Standard Plus Implant, NNC Healing Cap with labial bevel, NNC Impression Post for open tray, NNC Implant Analog, NNC Cementable Angled Abutment, NNC Solid Abutment, NNC Impression Cap for Solid Abutment, NNC Positioning Cylinder, SCS Screwdriver, Plastic Box

140.122

synOcta® System includes: Standard Plus Implant, RN Impression Cap, RN synOcta® Positioning Cylinder, RN synOcta® Analog, RN synOcta® Abutment, SCS Screwdriver, RN synOcta® Gold Coping with plastic crown, SCS Occlusal Screw, Plastic Box

140.024

Straumann® Bone Level Implant

includes: RC Implant, RC Healing Abutment, bottle shape, RC Impressi-on Post for open tray, RC Analog, RC Anatomic Abutment, angled 15°, Occlusal Screw, SCS Screwdriver, Plastic Box

120.0033

Straumann® Tapered Effect Implant

RN, SLA® 10 mm, cardboard box 140.062

193

HQ

/ 26

.12.

2015

/ En

glis

h

Inst

rum

ents

and

Ac

cess

orie

s

Models at Scale 1:1

Product Image Description Art.-No.

Lower Jaw edentulous, with 2 implants, (S ∅ 4.1 mm, RN) 140.032

edentulous, with 4 implants, (S ∅ 4.1 mm, RN) 140.049

Upper Jaw two single-tooth gaps and unilateral free-end saddle, with 4 implants 1 x Standard Plus Implant ∅ 3.3 mm, NN 1 x Standard Implant ∅ 4.8 mm, WN 1 x Standard Implant ∅ 4.1 mm, RN 1 x Standard Implant ∅ 4.8 mm, RN

140.033

ProstheticsDemonstration Materials

194

Information and Index:For a quick and easy overview, you can find all Straumann products listed alphabetically and by item number with the corresponding page numbers. Furthermore, you can find important advice, tem-plates and additional information on Straumann and Straumann products.

195

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

Information and Index

The Straumann® eShop 196

The Straumann Guarantee 197

Important Information 198

Material Information 199

Index 202

196

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

xThe Straumann® eShop

The Straumann® eShopThe Straumann® eShop.

Advantages:• Flexible payment options• Simplified ordering and navigation• Optimized search function• Modern user interface• Exclusive online offers• “Self Service” page

“Self Service” allows you to manage your orders clearly and conveniently.

You can:• View your order history• Create order templates• Print invoices.

Discover eShop for yourself and take advantage of exclusive offers:

www.straumann.com/eshopor scan the QR code with your smart phone or tablet.

Fast. Simple. Click!We put our customers first, which is why we blend service and design in the Straumann eShop: the logical product naviga-tion and search function; the intuitive operation; and the “Self Service” page with your order history and templates. You can

find your products quickly and conveniently in the Straumann® eShop. Place your orders 24/7 and take advantage of exclusive online offers.

197

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

The Straumann Guarantee

The Straumann GuaranteeThe Straumann Guarantee

The Straumann Guarantee applies if Straumann products are used in combination with other original Straumann products. Provided that the conditions of the Straumann Guarantee are fulfilled, the following guarantee periods are covered:

5-year guarantee period: for ceramic restorationsReplacement with an equivalent ceramic abutment (attached to a Straumann Implant) or with an equivalent ceramic crown, coping or bridge restoration (for tooth and implant-supported restorations).

10-year guarantee period: for metal restorationsReplacement with an equivalent metal abutment (attached to a Straumann Implant) or with an equivalent metal restoration (for tooth and implant-supported restoration).

Lifetime guarantee period: for implantsReplacement with an equivalent implant and an equivalent abutment, if necessary.

New: Roxolid® Lifetime Plus GuaranteeIn addition to the lifetime guarantee for implants, an extended warranty is provided in certain countries for Roxolid® Implants, should an implant break.

NoteFor applicable terms and conditions of the Straumann Guaran-tee (including the Guarantee territory), please refer to the Strau-mann Guarantee brochure (152.360/en).

Straumann®

Lifeti

me Guarantee

Dental Implant S

ystem

198

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

xImportant Information

Important InformationImportant Information

Use of Straumann ProductsDental professionals must have appropriate knowledge and instruction in the handling of the Straumann dental implants, Straumann CADCAM products, Straumann biomaterials or oth-er Straumann products (“Straumann Products”) in order to use Straumann Products safely and in accordance with the Instruc-tions for Use.

Straumann Products must be used in accordance with the in-structions for use provided by the manufacturer. It is the den-tal professional‘s responsibility to use the device in accordance with these Instructions for Use and to determine if the device is suitable for the individual patient‘s situation. The electronic In-structions for Use for our products are available on the website ifu.straumann.com.

Straumann Products are part of an overall concept and must be used only in conjunction with the corresponding original compo-nents and instruments distributed by Institut Straumann AG, its ultimate parent company and all affiliates or subsidiaries of such parent company (“Straumann”) or third party distributors. Use of products made by third parties not distributed by Straumann, or whose use is not expressly approved in the Instructions for Use or other instructions issued by Straumann, will void any warran-ty or other obligation, express or implied, by Straumann.

AvailabilitySome of the Straumann Products listed in this document may not be available in all countries.

CautionIn addition to the caution notes in this document, our products must be secured against aspiration when used intraorally.

ValidityUpon publication of this document, all previous versions are su-perseded.

DocumentationFor further information on Straumann Products, contact your Straumann representative.

Copyright and TrademarksStraumann documents may not be reprinted or published, in whole or in part, without the written authorization of Strau-mann. Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates.

General Terms and ConditionsAll offers, sales, deliveries and other services provided directly by a company within the Straumann Group are provided sole-ly on the basis of the general terms and conditions applicable in the specific country. These locally applicable general terms and conditions can be viewed on the following website: http://agb.straumann.com

199

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

Material Information

Material InformationMaterial Information

The properties of unalloyed grade 4 titanium for implants and abutments

a) Chemical composition

O0.40 % max.

Fe0.50 % max.

C0.10 % max.

N0.05 % max.

H0.012 % max.

TiBalance

The properties of Straumann® Roxolid® implantsRoxolid® is an alloy made of titanium and zirconium.

Mechanical properties

Strength Elongation Modulus of elasticity

Roxolid® 850 MPa min. 12 % min. 98 GPa

Straumann® PURE Ceramic Implant

Mechanical properties

Property Unit Titanium grade 4 Y-TZP

Density g/cm3 4.5 6.05

Hardness HV 250 1100 – 1500

Strength MPa 680 (tensile) ≥ 1200 (4-point bending strength)

Mod. of elasticity GPa 110 200 – 220

b) Mechanical properties

Strength Elongation Modulus of elasticity

Forged / annealed 550 MPa min. 15 % min. 110 GPa

Cold-worked 680 MPa min. 10 % min. 110 GPa

Ti-N = titanium nitride-coating Process: Layer thickness: Color:

PVD (physical vapor deposition) 3 – 12 μm golden yellow

c) Technical information

Grade 4 titanium conforms to the ISO 5832-2 standard

200

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

xMaterial Information


The properties of the alloy Titanium Aluminium-6 Niobium-7 (TAN) for Straumann® abutments

a) Chemical Composition

Al5.5 – 6.5%

Nb6.5 – 7.5%

Ta0.50 % max.

Fe0.25 % max.

O0.20 % max.

C0.08 % max.

N0.05 % max.

H0.009 % max.

TiBalance

b) Mechanical properties

Strenght Elongation Modulus of elasticity

Annealed 900 MPa min. 10 % min. 110 GPa

Alloys Ceramicor® Elitor®

Color white yellowish

Composition Au Pt Pd Ag Cu Ir Others

%%%%%%

+ = <1%

60,019.020.0

1.0

68.62.54.0

11.810.6

+Zn 2.5

Melting range °C°F

1400–1490 2552–2714

880–9401616–1724

Coefficient of thermal expansion

CTE °C

CTE °F

25–500 °C = 11.9 µm/m X °C25–600 °C = 12.2 µm/m X °C77–932 °F = 11.9 µm/m X °F

77–1112 °F = 12.2 µm/m X °F

Hardness in as-delivered condition HV5 >215 260

Hardness after casting-on or soldering HV5 205self-hardening

>260self-hardening

Hardened HV5 205 275

0.2 % Proof stress (Rp 0.2 %) as-delivered condition

N/mm2 >750 780

0.2 % Proof stress (Rp 0.2 %) after casting-on or soldering

N/mm2 >650 655

Possibilities for metallic bonding

casting-on or soldering soldering

Technical information Applications

Non-oxidizing alloy for casting-on with precious metal

alloys or for soldering with precious metal or

non-precious metal alloys

Alloy for construction elements attachments

c) Technical information

The alloy Titanium Aluminium-6 Niobium-7 (TAN) conforms to the ISO 5832-11 standard

201

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



Alloys Esteticor® Cosmor H

Color pale yellow

Composition Au+Pt-MetalsAu PtPd In Ir

%%%%%%

96.578.510.0

7.83.50.2

Melting range °C°F

1120–1280 2048–2336

Coefficient of thermal expansion

CTE °C

CTE °F

25–500 °C = 13.8 µm/m X °C25–600 °C = 14.0 µm/m X °C77–932 °F = 13.8 µm/m X °F

77–1112 °F = 14.0 µm/m X °F

ISO 9693 pos. 6.3.3.3 positive

Hardness after firing HV5 215

Tensile strength (Rm) after firing N/mm2 705

0.2% Proof stress (Rp 0.2%) after firing N/mm2 565

Elongation at break (A5) after firing % 13

Density g/cm2 18.2

Technical informationApplications

Low oxidationAlloy corresponds to

ISO 9693 standard

202

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

203

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

IndexAlphabetical index

Alphabetical index

Product texts Art.No. Page

48h Explantation device for BL Implant NC, L 31.4mm, stainless steel 026.2048 179

48h Explantation device for BL Implant RC, L 31.2mm, stainless steel 026.4048 179

48h Explantation device for STL implant NNC, L 31.4mm, stainless steel 049.361 179

48h Explantation Device, L 19.7mm, stainless steel, for RD Straumann® PURE Ceramic Implant (Monotype) 031.080 179

48h Explantation Device, L 19.8mm, stainless steel, for ND Straumann® PURE Ceramic Implant (Monotype) 031.081 179

5:1 Model, ITI® synOcta®system, plastic case 140.024 192

Abutment, 15° angled 048.483C 141

Abutment, 20° angled 048.484C 141

Activator set, for all bar matrices, three-part, stainless steel 046.150 71, 109, 129, 186

Adapter for handpiece, long, L 34mm, stainless steel 046.472 172

Adapter for handpiece, short, L 26mm, stainless steel 046.471 172

Adapter for handpiece, x-short, L 19mm, stainless steel 046.470 171

Adapter for ratchet, long, L 28mm, stainless steel 046.462 171

Adapter for ratchet, short, L 18mm, stainless steel 046.461 171

Adapter for ratchet, x-short, L 11mm, stainless steel 046.460 171

Alignment Pin, Ø 2.2mm, L 27mm, Ti 046.703 170

Analog for individualized RN Solid Abutments, 2 pieces, PPS/brass 048.117V4 65

Analog for RN Bar constructions, w. synOcta® 1.5, L 11.5mm, stainless steel 048.108 71

Analog for RN synOcta®, L 12mm, grey w. red stripe, stainless steel 048.124 58

Analog holder, length 205.0 mm, steel, anodized aluminium 046.239 186

Bar set, gold, 2x048.601, 2x048.124, 2x048.204, 4x048.350 040.195 68

Bar set, plastic, 2x048.601, 2x048.124, 2x048.227, 2x048.350 040.197 70

Bar set, titanium, 2x048.601, 2x048.124, 2x048.214, 2x048.350 040.196 69

Basal Screw RN/WN Variobase®, TAN 022.0045 62, 63, 81, 83

Bite registration aid, long, D 5 mm, H 12 mm, POM 048.941V4 58, 78

Bite registration aid, short, D 5 mm, H 8 mm, POM 048.940V4 58, 78

BL Bone Profiler 1, Ø 5.2mm, L 23mm, stainless steel 026.0022 170

BL Bone Profiler 2, Ø 6.6mm, L 23mm, stainless steel 026.0023 170

BL Bone Profiler 3, Ø 6mm, L 23mm, stainless steel 026.0024 170

BL Profile drill, Ø 4.1mm, guided, L 37mm, stainless steel 026.4503 174

BL/NNC Implant profile drill, Ø 3.3mm, long, stainless steel 026.2306 168

BL/NNC Implant profile drill, Ø 3.3mm, short, stainless steel 026.2303 168

BL/NNC Profile drill, Ø 3.3mm, guided, L 37mm, stainless steel 026.2503 174

BL/TE Tap f. adapter, f. Ø 4.1mm implants, L 23mm, polymer/stainless steel 026.4310 169

BL/TE Tap f. adapter, f. Ø 4.8mm implants, L 23mm, polymer/stainless steel 026.6310 169

BL/TE Tap f. handpiece, Ø 4.1mm, guided, L 42mm, stainless steel 026.4510 174

BL/TE Tap f. handpiece, Ø 4.8mm, guided, L 42mm, stainless steel 026.6510 174

BL/TE/NNC Tap f. adapter, f. Ø 3.3mm implants, L 23mm, PEEK/stainless steel 026.2310 169, 169

BL/TE/NNC Tap f. handpiece, Ø 3.3mm, guided, L 42mm, stainless steel 026.2510 174

BLT Drill, guided, Ø 2.8mm, long, stainless steel 034.262 174

BLT Drill, guided, Ø 2.8mm, medium, stainless steel 034.261 174

BLT Drill, guided, Ø 2.8mm, short, stainless steel 034.260 174







BLT Drill, long, Ø 2.8mm, L 41mm, stainless steel 026.2201 168



BLT Drill, short, Ø 2.8mm, L 33mm, stainless steel 026.2200 168



BLT Pilot Drill, guided, Ø 2.2mm, long, stainless steel 034.259 173

BLT Pilot Drill, guided, Ø 2.2mm, medium, stainless steel 034.258 173

BLT Pilot Drill, guided, Ø 2.2mm, short, stainless steel 034.257 173

BLT Pilot Drill, long, Ø 2.2mm, L 41mm, stainless steel 026.0002 167

BLT Pilot Drill, short, Ø 2.2mm, L 33mm, stainless steel 026.0001 167

BLT Profile Drill, guided, Ø 3.3mm, L 36mm, stainless steel 034.269 174



BLT Profile Drill, long, Ø 3.3mm, L 33mm, stainless steel 026.0004 169



204

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

xIndexAlphabetical index


BLT Profile Drill, short, Ø 3.3mm, L 25mm, stainless steel 026.0003 169



BLT Tap, guided, Ø 3.3mm, L 42mm, stainless steel 034.272 174



BLT Tap, Ø 3.3mm, L 25mm, stainless steel/TAN 026.0009 169



Bone Block Fixation cassette for sterilization and storage of drills,mini-screws, screwdriver, 130mmx118mmx25mm 041.032 154, 180

Bone Level implant distance indicator, L 100mm, Ti/stainless steel 026.0901 164

Bone Level Implant Ø 3.3mm NC, SLActive® 10mm, Roxolid® Loxim™ 021.2310 28




Bone Level Implant Ø 4.1mm RC, SLActive® 10mm, Roxolid® Loxim™ 021.4310 30

Bone Level Implant Ø 4.1mm RC, SLActive® 12mm, Roxolid® Loxim® 021.4312 30







Bone Level Implant profile drill, Ø 4.1mm, long, stainless steel 026.4306 168

Bone Level Implant profile drill, Ø 4.1mm, short, stainless steel 026.4303 168

Bone Level Implant profile drill, Ø 4.8mm, long, stainless steel 026.6306 168

Bone Level Implant profile drill, Ø 4.8mm, short, stainless steel 026.6303 168

Bone Level Implant, Ø 3.3 mm, NC, SLActive 10 mm, Roxolid, guided 021.2210G 28



Bone Level Implant, Ø 3.3mm NC, SLA® 10mm, Roxolid®, Loxim™ 021.2510 28




Bone Level Implant, Ø 4.1mm RC SLActive® 10mm, Roxolid®, guided 021.4310G 30



Bone Level Implant, Ø 4.1mm RC, SLA® 10mm, Roxolid®, Loxim™ 021.4510 30











Bone Level profile drill, Ø 4.8mm, guided, L 37mm, stainless steel 026.6503 174

Bone Level Tapered Implant, Ø 3.3mm NC, SLA® 10mm, Roxolid®, Loxim™ 021.3510 28





Bone Level Tapered Implant, Ø 3.3mm NC, SLActive® 10mm, Roxolid®, Loxim™ 021.3310 28





Bone Level Tapered Implant, Ø 4.1mm RC, SLA® 10mm, Roxolid®, Loxim™ 021.5510 30





Bone Level Tapered Implant, Ø 4.1mm RC, SLActive® 10mm, Roxolid®, Loxim™ 021.5310 30

205

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

















Bone profiler for RN, L 28mm, stainless steel, needed guiding cylinder: 049.082 044.304 170

Bone profiler for WN, L 25mm, stainless steel, needed guiding cylinder: 049.082 044.305 170

bonering fix BO-33010 155

botiss bonering®, Ø 6mm/3.3mm (outer/inner diameter), H 10mm, not slotted BO-33160 146

botiss bonering®, Ø 7mm/3.3mm (outer/inner diameter), H10mm, not slotted BO-33170 146

Calibration cup, yellow, Ø 80mm, anodized aluminium 041.412 188

CARES® Mono Scanbody for screw-retained abutment, abutment level, Ø 3.5mm, PEEK/TAN 025.0000 103

CARES® Mono Scanbody for screw-retained abutment, abutment level, Ø 4.6mm, PEEK/TAN 025.0001 103, 124

CARES® NC Mono Scanbody, D 3.5 mm, H 10 mm, PEEK, TAN 025.2915 94

CARES® NNC Mono Scanbody, D 3.5 mm, H 10 mm, PEEK, TAN 048.173 48

CARES® RC Mono Scanbody, D 4.1 mm, H 10 mm, PEEK, TAN 025.4915 114

CARES® RN Mono Scanbody, D 4.8 mm, H 10 mm, PEEK, TAN 048.168 58

CARES® WN Mono Scanbody, D 6.5 mm, H 10 mm, PEEK, TAN 048.169 78

Cassette without content, for bone condensation 040.550 181

Cassette without content, for sinus floor elevation 040.560 182

cerabone® Block 20x20x10mm, 1 piece/box BO-1720 149

cerabone® granules 0.5-1.0mm, natural bovine bone, 1x0.5cc(ml)/box BO-1510 149








C-handle H2, 6mm stop height, L 89mm, stainless steel 034.750 175



Classic Set, type 8° 040.921C 139

Classic Set, type F, K and H 040.919C 139

Classic Set, type Octa 040.922C 139, 139

Classic Set, type TPS Screwed implant 040.920C 139

Cleaning brush for ratchet, L 100mm, Ø 4.5mm, nylon/stainless steel 045.111V4 171, 184

Clear model mandible 140.032 193

Clear model mandible, with 4 implants 140.049 193

Clear model maxilla 140.033 193

collacone®, native collagen alveo cone, 12 pieces/box BO-511112 152

collprotect® membrane 15x20mm, 1 piece/box BO-601520 150



Connector for ratchet, L 14mm, stainless steel 034.005 175

CrossFit® Plan Cassette, empty, PC 026.0000 133

CrossFit® Plan Set, POM 026.0902 133

Crosshead mini-screws, Ø 1.5mm, L 10.0mm 042.701V5 154, 180




Cross-tip screwdriver 046.114C 142, 186

Dalbo®-Rotex® Matrix, PA 80399V4 42

Deactivator for Dolder® Bar matrices, mini, L 66mm, Grilon BS/brass 046.151 71, 109, 129, 186

Deactivator for Dolder® Bar matrices, regular, L 66mm, Grilon BS/brass 046.152 71, 109, 129, 186

Depth Gauge, Ø 2.8mm, L 27mm, Ti 046.705 170

Alphabetical index






206

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



Depth Gauge, Ø 3.5mm, L 27mm, Ti 046.706 170

Depth Gauge, Ø 4.2 mm, L 27mm, Ti 046.707 170

Depth Gauge, with distance indicator, Ø 2.2/2.8mm, L 27mm, Ti 046.704 170

Depth stop for osteotomes, Ø 2.2mm, Ti/stainless steel 046.550 181

Depth stop for osteotomes, Ø 2.8mm, Ti/stainless steel 046.551 181, 182



Diagnostic T, L 65mm, W 33mm, Ti 046.147 164

Diamond disc BO-33005 155

Diamond tulip BO-33004 155

Dish for tray 041.211, 56x31x11 mm, Al 041.440 188

Divider set, flat, for implants, 190 x 45 mm, plastic 041.530V5 183

Divider, large, for tray 041.211, 47.5 x 9.5 x 1mm, anodized aluminium 041.612 188

Divider, prostethics, 249 x 30mm, plastic 041.531 187

Divider, small, for dish 041.440, 27.5 x 9.5 x 1mm, anodized aluminium 041.615 188

Dolder® bar matrix includes spacer, mini, H 2.75 mm, L 25 mm, Elitor®/brass 048.413 68, 107, 127

Dolder® bar matrix includes spacer, regular, H 3.5mm, L 25mm, Elitor®/brass 048.414 68, 107, 127

Dolder® bar, egg-shaped cross-section, mini, H 2.3 mm, L 25 mm, Elitor® 048.411 68, 107, 127

Dolder® bar, egg-shaped cross-section, regular, H 3 mm, L 25 mm, Elitor® 048.412 68, 107, 127

Drawer for storage system, high, 282 x 220 x 47 mm, plastic 041.520 183, 187

Drawer for storage system, low, 282 x 220 x 32mm, plastic 041.521 187

Drawer for storage system, organisation, 282 x 220 x 32mm, plastic 041.522 187

Drill handle, Ø 2.2mm, 1mm/3mm stop, L 104mm, stainless steel 034.150 175




Drill Ø 1.5mm, L 37.0 mm, stainless steel 80381 42

Drill set, long, drill stop compatible for D 3.3mm implant, D 2.2, 2.8mm, length 41mm, stainless steel 040.441S 165

Drill set, long, drill stop compatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 41mm, stainless steel 040.444S 165

Drill set, long, drill stop compatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 41mm, stainless steel 040.447S 165

Drill set, long, drill stop incompatible for D 3.3mm implant, D 2.2, 2.8mm, length 41mm, stainless steel 040.401S 165

Drill set, long, drill stop incompatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 41mm, stainless steel 040.404S 165

Drill set, long, drill stop incompatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 41mm, stainless steel 040.407S 165

Drill set, short, drill stop compatible for D 3.3mm implant, D 2.2, 2.8mm, length 33mm, stainless steel 040.440S 165

Drill set, short, drill stop compatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 33mm, stainless steel 040.443S 165

Drill set, short, drill stop compatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 33mm, stainless steel 040.446S 165

Drill set, short, drill stop incompatible for D 3.3mm implant, D 2.2, 2.8mm, length 33mm, stainless steel 040.400S 165

Drill set, short, drill stop incompatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 33mm, stainless steel 040.403S 165

Drill set, short, drill stop incompatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 33mm, stainless steel 040.406S 165

Drill sleeve with collar, inner Ø 2.4mm, outer Ø 3.5mm, L 10mm, Ti 049.810V4 189

Drill stop aid, polymer 040.461 166

Drill Stop Kit, incl. single-patient drill stop sets, type A, B, C, D, incl. non-sterile Drill Stop Aid 040.460 166

Driver for Octa abutment 046.045C 142, 186

Dummy for titanium matrix, H 3.5mm, POM 048.451V4 72

Elliptical matrix, D 3.6mm, H 3.2mm, Elitor®/Ti 048.456 72

Explantation drill, long, for Ø 3.3mm, Ø 3.5mm, L 40.5mm, stainless steel 044.332 177

Explantation drill, long, for Ø 4.1mm, L 40.5mm, stainless steel 044.342 177

Explantation drill, long, for Ø 4.8mm, L 40.5mm, stainless steel 044.346 177

Explantation drill, medium, for Ø 3.3mm, Ø 3.5mm, L 37.5mm, stainless steel 044.331 177

Explantation drill, medium, for Ø 4.1mm, L 37.5mm, stainless steel 044.341 177

Explantation drill, medium, for Ø 4.8mm, L 37.5mm, stainless steel 044.345 177

Explantation drill, short, for Ø 3.3mm, Ø 3.5mm, L 32mm, stainless steel 044.330 177

Explantation drill, short, for Ø 4.1mm, L 32mm, stainless steel 044.340 177

Explantation drill, short, for Ø 4.8mm, L 32mm, stainless steel 044.344 177

Explantation instrument for synOcta® implants, long, L 26.6mm, stainless steel 80087 179

Explantation instrument for synOcta® implants, short, L 20.6mm, stainless steel 80103 179

Extension shell for angled RN synOcta® Abutm., H 5.5mm, POM 048.670 60

Extractor for titanium matrix, L 100mm, stainless steel 048.453 72

Fixation pin, for bar constructions, with synOcta® 1.5, gray, L 5mm, POM 048.073V4 71

Glide Hole Drill, Ø 1.5mm, stop = 20mm, L 37.0mm 044.125 154, 180

Guide cylinder for implant Ø 4.8mm, Ø 4.9mm, L 10.5mm, stainless steel 049.167 178

Guide cylinder for implants Ø 3.3mm & Ø 3.5mm, Ø 3.6mm, L 10.5mm, stainless steel 049.082 170, 178

Guide cylinder for implants Ø 4.1mm, Ø 4.2mm, L 10.5mm, stainless steel 049.083 178

Guide pin for reamer, for 048.540-542, L 50mm, stainless steel 046.242 185

Guide pin for reamer, for 048.545-546, L 50mm, stainless steel 046.244 185

207

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



Guide pin for reamer, for 048.605, L 50mm, stainless steel 046.246 185

Guide pin for reamer, for 048.606, L 50mm, stainless steel 046.247 185

Guide pin for reamer, for synOcta®, L 50mm, stainless steel 046.241 185

Guide sleeve for implants Ø 3.3mm, Ø 3.6mm, L 4.5mm, stainless steel 049.850 178

Guide sleeve for implants Ø 4.1mm & Ø 3.5mm, Ø 4.2mm, L 5.6mm, stainless steel 049.071 178

Guide sleeve for implants Ø 4.8mm, Ø 4.9mm, L 6.4mm, stainless steel 049.851 178

Handle for reamers and Tap for TS, L 65mm, steel/brass 046.240 185

Hexagonal screwdriver, L 30mm, stainless steel 046.421 172

Holding key, L 85mm, stainless steel 046.064 171

Implant distance indicator, L 100mm, Ti/stainless steel 046.148 164

Impression Post f. closed tray f. screw-ret. abut., abut. level, Ø 3.5mm, non-engaging, TAN/POM 025.0013 103

Impression Post f. closed tray f. screw-ret. abut., abut. level, Ø 4.6mm, non-engaging, TAN/POM 025.0014 103, 124

Impression Post f. open tray f. screw-ret. abut., abut. level, Ø 3.5mm, non-engaging, TAN 025.0011 103

Impression Post f. open tray f. screw-ret. abut., abut. level, Ø 4.6mm, non-engaging, TAN 025.0012 103, 124

Impression post for closed tray, abutment level, for screw-retained abutment, D 3.5mm, TAN/POM 025.2245 103

Impression post for closed tray, abutment level, for screw-retained abutment, D 4.6mm, TAN/POM 025.2246 103, 124

Impression post for open tray, TAN, for screw-ret. abut., abut. level, 0°, D 3.5mm 025.2243 103

Impression post for open tray, TAN, for screw-ret. abut., abut. level, 0°, D 4.6mm 025.2244 103, 124

Instrument rack BO-33008 155

Instrument tray maxgraft® bonering BO-33009 155

Instrument tweezers, L 140mm, stainless steel 046.110 171

Jason® collagen fleece 2x2cm, native collagen fleece, 12 pieces/box BO-690412 152

Jason® collagen fleece 5x5cm, native collagen fleece, 10 pieces/box BO-692510 152

Jason® G fleece 2.5x2.5cm, with Gentamicin, pH-neutral, 12 pieces/box BO-600612 152

Jason® membrane 15x20mm, Pericardium Collagene Membrane, 1 piece/box BO-681520 150



Lab Processing Screw, for Screw-retained Abutments, stainless steel 025.0006 103, 124

Light curette (pack of 5 pcs) 045.921 172

LOCATOR® abutment holder sleeve 046.413V4 55, 75, 89, 112, 132

Locator® angle measurement guide, stainless steal 048.200 55, 75, 89, 112, 132

LOCATOR® Bar Abutment, Pack of 10 048.804V10 61, 80, 100, 120

LOCATOR® Bar Abutment, Pack of 2 048.804V2 61, 80, 100, 120

LOCATOR® Bar Male Processing Package, Pack of 10 048.805V10 61, 80, 100, 120

LOCATOR® Bar Male Processing Package, Pack of 2 048.805V2 61, 80, 100, 120

LOCATOR® black processing male 048.195V4 55, 75, 89, 112, 132

Locator® block-out spacer, silicon 048.196V20 55, 75, 89, 112, 132

Locator® core tool, stainless steel with Au 046.415 55, 75, 89, 112, 132, 184

Locator® female analog, ø 5.0 mm, aluminium 048.198V4 73, 87

LOCATOR® Female Implant Analog, Ø 4.0 mm 025.0120-04 53, 110, 130

Locator® impression coping, aluminium housing with black male LDPE 048.197V4 53, 73, 87, 110, 130

LOCATOR® Male processing package, extended range, titanium/nylon 048.182V2 54, 74, 88, 111, 131

Locator® male processing package, titanium/nylon 048.189V2 54, 74, 88, 111, 131

Locator® parallel post, LDPE 048.199V4 55, 75, 89, 112, 132

LOCATOR® processing spacer 048.218V4 55, 75, 89, 112, 132

LOCATOR® replacement male, clear, 0°–10°, 5 lbs, 2.27 kg,H 1.7mm, nylon 048.190V4 54, 74, 88, 111, 131

Locator® replacement male, extended range, green, height 1.7 mm, nylon 048.193V4 54, 74, 88, 111, 131

LOCATOR® Replacement male, extended range, orange, height 1.7 mm, nylon 048.188V4 54, 74, 88, 111, 131

Locator® replacement male, extra light retention, blue, height 1.7 mm,nylon 048.192V4 54, 74, 88, 111, 131

Locator® replacement male, extra light retention, ext. range, red,height 1.7 mm, nylon 048.194V4 54, 74, 88, 111, 131

Locator® replacement male, light retention, pink, height 1.7 mm, nylon 048.191V4 54, 74, 88, 111, 131

LOCATOR® screwdriver for ratchet, length 21.0 mm 046.417 55, 75, 89, 112, 132, 184

Locator® screwdriver for ratchet, short, length 15.0 mm, stainless steel 046.416 55, 75, 89, 112, 132, 184

LOCATOR® zero retention ext range, gray 048.181V4 54, 74, 88, 111, 131

maxgraft® Block cancellous 10x10x10mm, 1 block/box BO-32111 146

maxgraft® Block cancellous 10x10x20mm, 1 block/box BO-32112 146

maxgraft® Block unicortical cancellous 10x10x10mm, 1 block/box BO-31111 146

maxgraft® Block unicortical cancellous 10x10x20mm, 1 block/box BO-31112 146

maxgraft® bonering 4.1 L: 10 mm, D: 7 mm BO-33174 146

maxgraft® bonering surgical kit, Trephine with Pin OD 6mm; Trephine with Pin AD 7mm; Planator with Pin AD 7mm; Pilot Drill Ø BO-33000 155

maxgraft® cortico-cancellous granules 0.5-2.0mm, processed human allograft, 1x0.5cc(ml)/box BO-31005 146




maxgraft® granules 0.5-2.0mm, processed human allograft, 1x0.5cc(ml)/box BO-30005 146

Alphabetical index






208

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde






maxresorb® block 20x10x10mm, synthetic bi-phasic calcium phosphate, 1 piece/box BO-21211 148

maxresorb® block 20x20x10mm, synthetic bi-phasic calcium phosphate, 1 piece/box BO-21221 148

maxresorb® granules 0.5-1.0mm, synthetic bi-phasic calcium phosphate, 1x0.5cc(ml)/box BO-20005 148




maxresorb® inject 0.5cc, synthetic injectable bone paste, 1 syringe/box BO-22005 148



Membranette 140.055 188

Milling cutter, Ø 2.8mm, guided, L 32.5mm, stainless steel 034.215 173



mucoderm® 15x20mm, 1 piece/box BO-701520 151



Mucosa punch Ø 3.4mm, guided, L 30mm, stainless steel 034.010 173



NC Abutment for bars, gold, H 10mm, Ceramicor® 022.2701 107

NC Abutment, for bars, Ti 022.2702 108

NC Analog for screw-retained abutment, TAN, straight 0°, D 3.5mm 023.2754 103

NC Anatomic Abutment, angled 15°, GH 2mm, Ti 022.2152 95

NC Anatomic Abutment, angled 15°, GH 3.5mm, Ti 022.2154 95

NC Anatomic Abutment, straight, GH 2mm, Ti 022.2102 95

NC Anatomic Abutment, straight, GH 3.5mm, Ti 022.2104 95

NC Basal Screw, for Cementable Abutment only, TAN 025.2908 94, 97, 191

NC Basal screw, for ceramic abutment only, TAN 025.2906 95, 101, 102, 191

NC Basal Screw, TAN 025.2900 94, 95, 101, 102, 107, 108, 191

NC Bite Registration Aid, H 12mm, POM 025.2212-04 94

NC Bite Registration Aid, H 8mm, POM 025.2208-04 94

NC Bone Level Implant Analog, L 12mm, Ti 025.2101 94

NC Burn-out coping f. screw-retained abut., POM, Bridge/Bar, D 3.5mm 023.2755 106, 109

NC Burn-out coping for screw-retained abutment, POM, Crown, D 3.5mm 023.2748 106

NC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 3.5mm, POM 023.0004 102

NC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 3.5mm, POM 023.0004V4 102

NC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0006 102

NC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0006V4 102

NC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 023.0018 102

NC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 023.0018V4 102

NC Burn-out coping, for Variobase™ Abutment, POM 023.2756 102

NC Burn-out coping, for Variobase™ Abutment, POM 023.2756-04 102

NC Cementable Abutment, D 3.5mm, GH 1mm, AH 4mm, Ti 022.2311 97

NC Cementable Abutment, D 3.5mm, GH 1mm, AH 5.5mm, Ti 022.2315 97





NC Cementable Abutment, D 5mm, GH 1mm, AH 4mm, Ti 022.2321 97

NC Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, Ti 022.2325 97





NC Cementable All-In-One Set, for crown, D 3.5mm, AH 4mm, GH 1mm 027.4301 98



NC Cementable All-In-One Set, for crown, D 5mm, AH 4mm, GH 1mm 027.4307 99



NC Cementable All-In-One Set, for crown, D 5mm, AH 5.5mm, GH 1mm 027.4310 99


209

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x




NC Closure cap, Ø 2.8mm, H 0mm, Ti 024.2100S 29

NC Closure cap, Ø 2.8mm, H 0mm, Ti 024.2100S-04 29

NC Closure cap, Ø 3.1mm, H 0.5mm, Ti 024.2105S 29

NC Closure cap, Ø 3.1mm, H 0.5mm, Ti 024.2105S-04 29

NC Coping for screw-retained abutment, Bar, Ø 3.5mm, Ceramicor® 023.2753 107

NC Coping for screw-retained abutment, Bridge, Ø 3.5mm, Ceramicor®/POM 023.2752 106

NC Coping for screw-retained abutment, Crown, Ø 3.5mm, Ceramicor®/POM 023.2751 106

NC Coping for screw-retained abutment, Ti, Bar, D 3.5mm 023.2750 108

NC Coping for screw-retained abutment, Ti, Bridge, D 3.5mm 023.2749 106

NC Coping for screw-retained abutment, Ti, Crown, D 3.5mm 023.2747 106

NC Coping, for bridge on Cementable Abutment, D 3.5mm, POM 023.2310 97

NC Coping, for bridge on Cementable Abutment, D 5mm, POM 023.2320 97

NC Coping, for crown on Cementable Abutment, D 3.5mm, POM 023.2316 97

NC Coping, for crown on Cementable Abutment, D 5mm, POM 023.2326 97

NC Gold Abutment, for crown, H 3.7mm, Ceramicor®/POM 022.2410 101

NC Guiding Cylinder for BL Bone Profiler, Ø 3.25mm, L 12.5mm, TAN 026.0025S 170

NC Guiding cylinder for Ø 3.3mm, BL Implant explantation, stainless steel 026.2801 178

NC Healing abutment, bottle shape, Ø 3.3mm, H 3.5mm, Ti 024.2234S 29

NC Healing abutment, bottle shape, Ø 3.3mm, H 5mm, Ti 024.2236S 29

NC Healing abutment, conical shape, Ø 3.6mm, H 2mm, Ti 024.2222S 29

NC Healing abutment, conical shape, Ø 3.6mm, H 3.5mm, Ti 024.2224S 29



NC Healing abutment, conical shape, Ø 4.8mm, H 3.5mm, Ti 024.2244S 29


NC Healing abutment, customizable, Ø 5mm, H 7mm, PEEK 024.2270S 29

NC Implant Analog, for Cementable Abutment, D 3.5mm, AH 4mm, TAN 025.2112 96

NC Implant Analog, for Cementable Abutment, D 3.5mm, AH 5.5mm, TAN 025.2116 96

NC Implant Analog, for Cementable Abutment, D 5mm, AH 4mm, TAN 025.2122 96

NC Implant Analog, for Cementable Abutment, D 5mm, AH 5.5mm, TAN 025.2126 96

NC Impression Cap, for Cementable Abutment, D 3.5mm, AH 4mm, POM 025.2203-04 96

NC Impression Cap, for Cementable Abutment, D 5mm, AH 4mm, POM 025.2204-04 96

NC Impression Cap, for Cementable Abutment, D 5mm, AH 5.5mm, POM 025.2220-04 96

NC Impression Post Closed Tray, with 1 guide screw & 2 caps, TAN/POM 025.2201 94

NC Impression Post Open Tray, short, with guide screw, L 16.5mm, TAN 025.2202 94

NC Impression post, for open tray, with guide screw, L 30mm, TAN 025.2205 94

NC LOCATOR® Abutment, height 2 mm, Ti alloy with TiN coating 022.2502 110





NC PLAN Anatomic Abutment, angled 15°, GH 2mm, POM 025.2603-04 133

NC PLAN Anatomic Abutment, angled 15°, GH 3.5mm, POM 025.2604-04 133

NC PLAN Anatomic Abutment, straight, GH 2mm, POM 025.2601-04 133

NC PLAN Anatomic Abutment, straight, GH 3.5mm, POM 025.2602-04 133

NC PLAN Cementable Abutment, D 3.5mm, GH 1mm, AH 4mm, POM 025.2611-04 133

NC PLAN Cementable Abutment, D 3.5mm, GH 1mm, AH 5.5mm, POM 025.2615-04 133





NC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 4mm, POM 025.2621-04 133

NC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, POM 025.2625-04 133





NC PLAN Gold Abutment, for crown, POM 025.2610-04 133

NC PLAN LOCATOR® Abutment, H 2mm, POM 025.2642-04 134





NC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type A 025.2655-04 134

Alphabetical index






210

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



NC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type B 025.2658-04 134

NC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type A 025.2653-04 134

NC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type B 025.2660-04 134

NC Plan screw-retained abutment, POM, straight 0°, D 3.5mm, GH 2.5mm 025.2648-04 134

NC Plan screw-retained abutment, POM, straight 0°, D 4.6mm, GH 2.5mm 025.2650-04 134

NC Polishing Aid, stainless steel 025.2920 101

NC Polishing Aid, stainless steel 025.2920-04 101

NC Protective cap for screw-retained abutment, Ø 3.5mm, H 5mm, PEEK/TAN 024.2323-04 103

NC Protective cap for screw-retained abutment, Ø 3.5mm, H 6.5mm, PEEK/TAN 024.2324-04 103

NC Protective cap for screw-retained abutment, Ø 3.5mm, H 8mm, PEEK/TAN 024.2325-04 103

NC Protective Cap, for Cementable Abutment, D 3.5mm, AH 4mm, PEEK 024.2312-04 96

NC Protective Cap, for Cementable Abutment, D 3.5mm, AH 5.5mm, PEEK 024.2316-04 96

NC Protective Cap, for Cementable Abutment, D 5mm, AH 4mm, PEEK 024.2322-04 96

NC Protective Cap, for Cementable Abutment, D 5mm, AH 5.5mm, PEEK 024.2326-04 96

NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 2.5mm, Type A, Pin 022.2749P 104

NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 2.5mm, Type B, Pin 022.2750P 104

NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type A, Pin 022.2755P 104

NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type B, Pin 022.2756P 105





NC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type A, Pin 022.2757P 105

NC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type B, Pin 022.2758P 105



NC Screw-retained Abutment, TAN, straight 0°, Ø 3.5mm, GH 1mm, Pin 022.2745P 104

NC Screw-retained Abutment, TAN, straight 0°, Ø 3.5mm, GH 2.5mm, Pin 022.2746P 104



NC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 2.5mm, Pin 022.2748P 104


NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 2mm, MO 0, ZrO2 022.2822 95

NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 2mm, MO 1, ZrO2 022.2842 95

NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 3.5mm, MO 0, ZrO2 022.2824 95

NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 3.5mm, MO 1, ZrO2 022.2844 95

NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 0, ZrO2 022.2812 95

NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 1, ZrO2 022.2832 95

NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 0, ZrO2 022.2814 95

NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 1, ZrO2 022.2834 95

NC Straumann® Scanbody, PEEK/TAN 025.2905 94

NC Straumann® Variobase® for CEREC®, TAN 022.0025 100

NC Temporary Abutment, Bridge, D 3.5mm, H 11mm, TAN 024.2375 94

NC Temporary Abutment, Crown, D 3.5mm, H 11mm, TAN 024.2371 94

NC Temporary abutment, D 5mm, H 12mm, VITA CAD-Temp® 024.2372 94

NC Temporary Coping, for Cementable Abutment, D 3.5mm, PMMA 024.2346 96

NC Temporary Coping, for Cementable Abutment, D 5mm, PMMA 024.2356 96

NC Transfer Aid, for Cementable Abutment, D 3.5mm, PC 025.2911-04 96

NC Transfer Aid, for Cementable Abutment, D 5mm, PC 025.2912-04 96

NC Variobase® Abutment, with screw, D 3.8mm, H 3.5mm, TAN 025.2921 100, 102

NC Variobase®, for crown, with screw, Ø 3.8mm, H 5.5mm, TAN 022.0027 100, 102

NC Variobase™ Coping,f.Scr.-ret.Abt.Ø3.5mm, with screw, Ø 4.2mm, H 3.5mm, TAN 023.0000 100, 102

NC Variobase™, for bridge/bar, with screw, Ø 4.5mm, H 3.5mm, TAN 022.0000 100, 102

NC Wax-up sleeve, L 15.1 mm, PEEK 025.2903 100

NC Wax-up sleeve, L 15.1 mm, PEEK 025.2903-04 100

NC/RC Analog for screw-retained abutment, TAN, angled 17°/30°, D 4.6mm 023.4757 103, 124

NC/RC Analog for screw-retained abutment, TAN, straight 0°, D 4.6mm 023.4756 103, 124

NC/RC Burn-out coping f. screw-retained abut., POM, Bridge/Bar, D 4.6mm 023.4758 106, 109, 126, 129

NC/RC Burn-out coping for screw-retained abutment, POM, Crown, D 4.6mm 023.4748 106, 126

NC/RC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 4.6mm, POM 023.0005 102, 123

NC/RC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 4.6mm, POM 023.0005V4 102, 123

NC/RC Coping for screw-retained abutment, Bar, Ø 4.6mm, Ceramicor® 023.4755 107, 127

NC/RC Coping for screw-retained abutment, Bridge, Ø 4.6mm, Ceramicor®/POM 023.4754 106, 126

NC/RC Coping for screw-retained abutment, Crown, Ø 4.6mm, Ceramicor®/POM 023.4753 106, 126

NC/RC Coping for screw-retained abutment, Ti, Bar, D 4.6mm 023.4752 108, 128

211

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



NC/RC Coping for screw-retained abutment, Ti, Bridge, D 4.6mm 023.4751 106, 126

NC/RC Coping for screw-retained abutment, Ti, Crown, D 4.6mm 023.4747 106, 126

NC/RC Occlusal screw, TAN, for coping, screw-retained abutment 023.4763 101, 102, 106, 107, 108, 109,

121, 123, 126, 127, 128, 129,

191

NC/RC Protective cap for screw-retained abutment, Ø 4.6mm, H 5.1mm, PEEK/TAN 024.4323-04 103, 124



NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 1mm 023.4749 105, 125, 191

NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 2.5mm 023.4750 105, 125, 191

NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 4mm 023.4760 105, 125, 191

NC/RC Screw, for screw-retained abutment 17°/30°, TAN 025.0002 105, 125, 191

NC/RC SRBB Bone Level screw, TAN 025.2926 50, 51, 101, 102, 121, 123, 191

NC/RC Variobase™ Cop.,f.Scr.-ret.Abt.Ø4.6mm, with screw, Ø 5.1mm, H 3.5mm, TAN 023.0001 100, 102, 120, 123

ND Implant Analog, AH 4mm, TAN 031.200 37

ND Implant Analog, AH 5.5mm, TAN 031.201 37

ND Impression Cap, AH 4mm, POM 031.250 37

ND Impression Cap, AH 5.5mm, POM 031.251 37

ND Position Indicator, Ø 2.2mm, AH 4mm, L 8mm, Ti 031.102 37

ND Position Indicator, Ø 2.2mm, AH 5.5mm, L 8mm, Ti 031.112 37

ND Position Indicator, Ø 2.8mm, AH 4mm, L 8mm, Ti 031.103 37

ND Position Indicator, Ø 2.8mm, AH 5.5mm, L 8mm, Ti 031.113 37

ND Protective Cap, AH 4mm, PEEK 031.320 37

ND Protective Cap, AH 5.5mm, PEEK 031.321 37

ND Temporary Coping, for bridge, PMMA 031.301 37

ND Temporary Coping, for crown, PMMA 031.300 37

NN Analog, L 14mm, stainless steel 048.130 140

NN Coping 15° angled, H 8,8 mm, Ti 048.550 140

NN Coping 20° angled, H 8,8 mm, Ti 048.551 140

NN Coping, H 9mm, Ti 048.505 140

NN Gold coping, cast-on, H 10mm, Ceramicor®/POM 048.635 140

NN Impression cap with integral guide screw, L 17,5 mm, Al/TAN 048.016 140

NN Occlusal screw, L 5mm, D 1.8mm, TAN 049.177 140

NN Protective cap with integr.occlusal screw, D 4mm, H 3.4mm, PEEK/TAN 048.050 140

NN Temporary Coping, H 10mm, PEEK/TAN 048.669 140

NNC Analog for Solid abutment, for 048.547, H 14.3mm, TAN 048.527 52



NNC Basal Screw, for cementable abutments, L 7.1mm, TAN 048.314 48, 49, 190

NNC Basal screw, L 7.1mm, TAN 048.313 48, 50, 51, 190

NNC Bite registration aid, H 12mm, POM 048.961V4 48

NNC Bite registration aid, H 8mm, POM 048.960V4 48

NNC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0008 51

NNC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0008V4 51

NNC Burn-out Coping, for Variobase®, for crown, AH 5.75mm, POM 023.0014 51

NNC Burn-out Coping, for Variobase®, for crown, AH 5.75mm, POM 023.0014V4 51

NNC Burn-out coping, for Variobase™ Abutment, POM 048.267 51

NNC Burn-out coping, for Variobase™ Abutment, POM 048.267V4 51

NNC Cementable abutment, angled 15°, type A, H 5.9mm, Ti 048.621 49

NNC Cementable abutment, angled 15°, type B, H 5.9mm, Ti 048.622 49

NNC Cementable abutment, straight, for crowns/bridges, H 5.7mm, Ti 048.598 49

NNC Closure cap, Ø 2.6mm, H 0mm, Ti 048.324S 20

NNC Closure cap, Ø 2.6mm, H 0mm, Ti 048.324SV4 20

NNC Closure cap, Ø 4mm, H 1.5mm, Ti 048.325S 20

NNC Closure cap, Ø 4mm, H 1.5mm, Ti 048.325SV4 20

NNC Gold abutment, bridge, H 3.6mm, Ceramicor®/ TAN / POM 048.593 50

NNC Gold abutment, crown, H 3.6mm, Ceramicor® / TAN / POM 048.592 50

NNC Guide pin for reamer 046.237, for Solid abutments, L 52.9mm, stainl. steel 046.249 185

NNC Healing cap, labial bevel, Ø 4mm, H 2mm, Ti 048.082S 20

NNC Healing cap, Ø 4mm, H 3mm, Ti 048.071S 20

NNC Healing cap, Ø 4mm, H 4.5mm, Ti 048.074S 20

NNC Implant analog, L 12.5mm, Ti 048.127 48

NNC Impression cap, H 8mm, POM 048.579 52

NNC Impression post, closed tray, H 10.9mm, TAN/POM 048.134 48

NNC Impression post, for open tray, H 10.1mm, TAN 048.128 48

Alphabetical index






212

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



NNC Locator® Abutment, H 1mm, Ti alloy with TiN coating 048.581 53






NNC PLAN Cementable abutment, angled 15°, type A, H 5.9mm, POM 048.944V4 90

NNC PLAN Cementable abutment, angled 15°, type B, H 5.9mm, POM 048.945V4 90

NNC PLAN Cementable abutment, straight, for crown/bridge, H 5.7mm, POM 048.943V4 90

NNC PLAN Locator® abutment, H 1mm, POM 048.946V4 90






NNC PLAN Solid Abutment, H 4mm, POM 048.952V4 90

NNC PLAN Solid Abutment, H 5.5mm, POM 048.953V4 90

NNC PLAN Solid Abutment, H 7mm, POM 048.954V4 90

NNC Plastic coping for Solid abutment, for bridge, H 10.2mm, POM 048.264 52

NNC Plastic coping for Solid abutment, for crown, H 10.2mm, POM 048.263 52

NNC Plastic coping, for 048.598, for bridge, H 7mm, POM 048.257 49

NNC Plastic coping, for 048.598, for crown, H 7mm, POM 048.256 49

NNC Plastic coping, for 048.621/ 048.622, for crowns & bridges, H 7.2mm, POM 048.258 49

NNC Positioning cylinder for 048.547, H 10.2mm, POM 048.587 52



NNC Post for temporary restoration, bridge, H 10.3mm, TAN 048.502 48

NNC Post for temporary restoration, crown, H 10.3mm, TAN 048.501 48

NNC Protective cap for Solid abutment, for 048.547, H 5.6mm, PEEK 048.700 52



NNC Reamer for 45° shoulder, L 17mm, stainless steel / Ti-N 046.237 185

NNC Solid abutment driver, long, L 19mm, stainless steel 048.156 52, 184

NNC Solid abutment driver, short, L 13mm, stainless steel 048.155 52, 184

NNC Solid abutment, H 4mm, yellow, Ti 048.547 52

NNC Solid abutment, H 5.5mm, gray, Ti 048.548 52

NNC Solid abutment, H 7mm, blue, Ti 048.549 52

NNC Temporary abutment, D 5mm, H 10mm, VITA CAD-Temp® 048.699 48

NNC Temporary coping for Solid abutment, for bridge, H 8.5mm, PMMA 048.659 52

NNC Temporary coping for Solid abutment, for crown, H 8.5mm, PMMA 048.658 52

NNC Variobase® Abutment, with screw, D 3.9mm, H 3.75mm, TAN 048.709 50, 51

NNC Variobase®, for crown, with screw, Ø 3.9mm, H 5.75mm, TAN 022.0021 50, 51

NNC Variobase™, for bridge/bar, with screw, Ø 4.2mm, H 3.5mm, TAN 022.0002 50, 51

NNC Wax-up sleeve, L 12.75 mm, PEEK 048.137 50

NNC Wax-up sleeve, L 12.75 mm, PEEK 048.137V4 50

Occlusal screw, L 15 mm 048.304C 141

Octa Abutment, H 1.5 mm 048.404C 141

Osteotome angled, for bone condensation, Ø 2.2mm, stainless steel 046.510 181




Osteotome angled, for sinus floor elevation, Ø 2.8mm, stainless steel 046.531 182



Osteotome instrument kit, for bone condensation, stainless steel 040.500 181

Osteotome instrument kit, for sinus floor elevation, stainless steel 040.501 182

Osteotome straight, for bone condensation, Ø 2.2mm, stainless steel 046.500 181




Osteotome straight, for sinus floor elevation, Ø 2.8mm, stainless steel 046.521 182



Patient matched allogenic implant, botiss bonebuilder® BO-PMIa 147

Pilot drill 1, long, Ø 2.2mm, L 41mm, stainless steel 044.211 167

213

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



Pilot drill 1, short, Ø 2.2mm, L 33mm, stainless steel 044.210 167

Pilot drill 2, long, Ø 2.8mm, L 41mm, stainless steel 044.215 167

Pilot drill 2, short, Ø 2.8mm, L 33mm, stainless steel 044.214 167

Pilot drill Ø 2mm BO-33001 155

Pilot drill, Ø 2.2mm, long, 20mm, guided, L 36mm, stainless steel 034.126 173

Pilot drill, Ø 2.2mm, short, 16mm, guided, L 32mm, stainless steel 034.123 173

Pilot drill, Ø 2.2mm, x-long, 24mm, guided, L 40mm, stainless steel 034.129 173

Pin abutment 048.424C 141

Pin for 049.810, Ø 2.2mm, L 10mm, Ti 049.817V4 189



Planator 7mm BO-33007 155

Planator, 6mm BO-33006 155

Plastic bar, egg-shaped cross-section, mini, H 2.3mm, L 80mm, PMMA 048.461 70, 109, 129

Plastic bar, egg-shaped cross-section, regular, H 3mm, L 80mm, PMMA 048.460 70, 109, 129

Plastic coping for abutment 8º 048.220C 141

Plastic shoulder for RN synOcta® angled, angled 15° or 20°, H 4mm, POM 048.676V4 60

Plastic shoulder for WN synOcta® angled, angled 15°, H 4mm, POM 048.678 80

Polishing Aid, for Screw-retained Abutments Ø 3.5mm, TAN 025.0004 103

Polishing Aid, for Screw-retained Abutments Ø 3.5mm, TAN 025.0004V4 103

Polishing Aid, for Screw-retained Abutments Ø 4.6mm, TAN 025.0005 103, 124

Polishing Aid, for Screw-retained Abutments Ø 4.6mm, TAN 025.0005V4 103, 124

Polishing protector for RN synOcta® Coping, L 15 mm, stainless steel 046.245 64, 71

Prosthetic cassette for instruments, 224 x 115 x 20 mm, anodized aluminium 041.022 188

Prosthetic cassette for instruments, complete, 224 x 115 x 20 mm, anodized aluminium 040.185 188

Ratchet, including service instrument, L 84mm, stainless steel 046.119 171, 184

RC Abutment for bars, gold, H 10mm, Ceramicor® 022.4701 127

RC Abutment, for bars, Ti 022.4702 128

RC Anatomic Abutment, angled 15°, GH 2mm, Ti 022.4152 115

RC Anatomic Abutment, angled 15°, GH 3.5mm, Ti 022.4154 115

RC Anatomic Abutment, straight, GH 2mm, Ti 022.4102 115

RC Anatomic Abutment, straight, GH 3.5mm, Ti 022.4104 115

RC Basal Screw, for Cementable Abutment only, TAN 025.4908 114, 117, 191

RC Basal screw, for ceramic abutment only, TAN 025.4906 115, 121, 191

RC Basal Screw, for Gold Abutment bridge only, TAN 025.4902 122, 191

RC Basal Screw, TAN 025.4900 114, 115, 121, 122, 123, 127,

128, 191

RC Bite Registration Aid, H 12mm, POM 025.4212-04 114

RC Bite Registration Aid, H 8mm, POM 025.4208-04 114

RC Bone Level Implant Analog, L 12mm, Ti 025.4101 114

RC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0007 123

RC Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0007V4 123

RC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 023.0017 123

RC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 023.0017V4 123

RC Burn-out coping, for Variobase™ Abutment, POM 023.4759 123

RC Burn-out coping, for Variobase™ Abutment, POM 023.4759-04 123

RC Cementable Abutment, D 5mm, GH 1mm, AH 4mm, Ti 022.4321 116

RC Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, Ti 022.4325 117





RC Cementable Abutment, D 6.5mm, GH 1mm, AH 4mm, Ti 022.4331 117

RC Cementable Abutment, D 6.5mm, GH 1mm, AH 5.5mm, Ti 022.4335 117





RC Cementable All-In-One Set, for crown, D 5mm, AH 4mm, GH 1mm 027.4313 118



RC Cementable All-In-One Set, for crown, D 5mm, AH 5.5mm, GH 1mm 027.4316 118



RC Cementable All-In-One Set, for crown, D 6.5mm, AH 4mm, GH 1mm 027.4319 118

Alphabetical index






214

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde





RC Cementable All-In-One Set, for crown, D 6.5mm, AH 5.5mm, GH 1mm 027.4322 119



RC Closure cap, Ø 3.3mm, H 0mm, Ti 024.4100S 31, 33

RC Closure cap, Ø 3.3mm, H 0mm, Ti 024.4100S-04 31, 33

RC Closure cap, Ø 3.5mm, H 0.5mm, Ti 024.4105S 31, 33

RC Closure cap, Ø 3.5mm, H 0.5mm, Ti 024.4105S-04 31, 33

RC Coping, for bridge on Cementable Abutment, D 5mm, POM 023.4320 117

RC Coping, for bridge on Cementable Abutment, D 6.5mm, POM 023.4330 117

RC Coping, for crown on Cementable Abutment, D 5mm, POM 023.4326 117

RC Coping, for crown on Cementable Abutment, D 6.5mm, POM 023.4336 117

RC Gold Abutment, for bridge, H 5.4mm, Ceramicor®/POM 022.4430 122

RC Gold Abutment, for crown, H 3.8mm, Ceramicor®/POM 022.4410 122

RC Guiding Cylinder for BL Bone Profiler, Ø 3.7mm, L 12.5mm, TAN 026.0026S 170

RC Guiding cylinder for Ø 4.1mm, BL Implant explantation, stainless steel 026.4801 178

RC Guiding cylinder for Ø 4.8mm, BL Implant explantation, stainless steel 026.6801 178

RC Healing abutment, bottle shape, Ø 4.4mm, H 4mm, Ti 024.4234S 31, 33

RC Healing abutment, bottle shape, Ø 4.7mm, H 6mm, Ti 024.4236S 31, 33

RC Healing abutment, conical shape, Ø 4.5mm, H 2mm, Ti 024.0000S 31, 33



RC Healing abutment, conical shape, Ø 5mm, H 2mm, Ti 024.4222S 31, 33









RC Healing abutment, customizable, Ø 7mm, H 7mm, PEEK 024.4270S 31, 33

RC Implant Analog, for Cementable Abutment, D 5mm, AH 4mm, TAN 025.4132 116

RC Implant Analog, for Cementable Abutment, D 5mm, AH 5.5mm, TAN 025.4136 116

RC Implant Analog, for Cementable Abutment, D 6.5mm, AH 4mm, TAN 025.4122 116

RC Implant Analog, for Cementable Abutment, D 6.5mm, AH 5.5mm, TAN 025.4126 116

RC Impression Cap, for Cementable Abutment, D 5mm, AH 4mm, POM 025.4203-04 116

RC Impression Cap, for Cementable Abutment, D 5mm, AH 5.5mm, POM 025.4220-04 116

RC Impression Cap, for Cementable Abutment, D 6.5mm, AH 4mm, POM 025.4204-04 116

RC Impression Cap, for Cementable Abutment, D 6.5mm, AH 5.5mm, POM 025.4230-04 116

RC Impression Post Closed Tray, with 1 guide screw & 2 caps, TAN/POM 025.4201 114

RC Impression Post Open Tray, short, with guide screw, L 16.5mm, TAN 025.4202 114

RC Impression post, for open tray, with guide screw, L 30mm, TAN 025.4205 114

RC LOCATOR® Abutment, height 1 mm, Ti alloy with TiN coating 022.4501 130






RC PLAN Anatomic Abutment, angled 15°, GH 2mm, POM 025.4603-04 134

RC PLAN Anatomic Abutment, angled 15°, GH 3.5mm, POM 025.4604-04 134

RC PLAN Anatomic Abutment, straight, GH 2mm, POM 025.4601-04 134

RC PLAN Anatomic Abutment, straight, GH 3.5mm, POM 025.4602-04 134

RC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 4mm, POM 025.4621-04 134

RC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, POM 025.4625-04 134





RC PLAN Cementable Abutment, D 6.5mm, GH 1mm, AH 4mm, POM 025.4631-04 135

RC PLAN Cementable Abutment, D 6.5mm, GH 1mm, AH 5.5mm, POM 025.4635-04 135




215

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x




RC PLAN Gold Abutment for bridge, POM 025.4630-04 134

RC PLAN Gold Abutment for crown, POM 025.4610-04 134

RC PLAN LOCATOR® Abutment, H 1mm, POM 025.4641-04 135






RC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type A 025.4649-04 135

RC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type B 025.4650-04 135

RC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type A 025.4653-04 135

RC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type B 025.4660-04 135

RC Plan screw-retained abutment, POM, straight 0°, D 4.6mm, GH 2.5mm 025.4648-04 135

RC Polishing Aid, stainless steel 025.4920 122

RC Polishing Aid, stainless steel 025.4920-04 122

RC Protective Cap, for Cementable Abutment, D 5mm, AH 4mm, PEEK 024.4322-04 116

RC Protective Cap, for Cementable Abutment, D 5mm, AH 5.5mm, PEEK 024.4326-04 116

RC Protective Cap, for Cementable Abutment, D 6.5mm, AH 4mm, PEEK 024.4332-04 116

RC Protective Cap, for Cementable Abutment, D 6.5mm, AH 5.5mm, PEEK 024.4336-04 116

RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 2.5mm, Type A, Pin 022.4747P 125

RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 2.5mm, Type B, Pin 022.4748P 125

RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type A, Pin 022.4752P 125

RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type B, Pin 022.4753P 125



RC Screw-retained Abutment, TAN, angled 30°, D 4.6mm, GH 5.5mm, Type B, Pin 022.0017P 125



RC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type A, Pin 022.4754P 125

RC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type B, Pin 022.4755P 125


RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 1mm, Pin 022.4745P 125

RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 2.5mm, Pin 022.4746P 125

RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 4mm, Pin 022.4751P 125

RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 2mm, MO 0, ZrO2 022.4822 115

RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 2mm, MO 1, ZrO2 022.4842 115

RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 3.5mm, MO 0, ZrO2 022.4824 115

RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 3.5mm, MO 1, ZrO2 022.4844 115

RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 0, ZrO2 022.4812 115

RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 1, ZrO2 022.4832 115

RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 0, ZrO2 022.4814 115

RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 1, ZrO2 022.4834 115

RC Straumann® Scanbody, PEEK/TAN 025.4905 114

RC Straumann® Variobase® for CEREC®, TAN 022.0024 120

RC Temporary Abutment, Bridge, D 4.5mm, H 11mm, TAN 024.4375 114

RC Temporary Abutment, Crown, D 4.5mm, H 11mm, TAN 024.4371 114

RC Temporary abutment, D 7mm, H 12mm, VITA CAD-Temp® 024.4372 114

RC Temporary Coping, for Cementable Abutment, D 5mm, PMMA 024.4356 116

RC Temporary Coping, for Cementable Abutment, D 6.5mm, PMMA 024.4366 116

RC Transfer Aid, for Cementable Abutment, D 5mm, PC 025.4912-04 116

RC Transfer Aid, for Cementable Abutment, D 6.5mm, PC 025.4913-04 116

RC Variobase® Abutment, with screw, D 4.5mm, H 3.5mm, TAN 025.4921 120, 123

RC Variobase®, for crown, with screw, Ø 4.5mm, H 5.5mm, TAN 022.0026 120, 123

RC Variobase™, for bridge/bar, with screw, Ø 4.5mm, H 3.5mm, TAN 022.0001 120, 123

RC Wax-up sleeve, L 18.8mm, PEEK 025.4903 120

RC Wax-up sleeve, L 18.8mm, PEEK 025.4903-04 120

RD Implant Analog, AH 4mm, TAN 031.210 39

RD Implant Analog, AH 5.5mm, TAN 031.211 39

RD Impression Cap, AH 4mm, POM 031.260 39

RD Impression Cap, AH 5.5mm, POM 031.261 39

RD Position Indicator, Ø 2.2mm, AH 4mm, L 8mm, Ti 031.123 39

RD Position Indicator, Ø 2.2mm, AH 5.5mm, L 8mm, Ti 031.143 39

RD Position Indicator, Ø 3.5mm, AH 4mm, L 8mm, Ti 031.125 39

RD Position Indicator, Ø 3.5mm, AH 5.5mm, L 8mm, Ti 031.145 39

Alphabetical index






216

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



RD Protective Cap, AH 4mm, PEEK 031.330 39

RD Protective Cap, AH 5.5mm, PEEK 031.331 39

RD Temporary Coping, for bridge, PMMA 031.311 39

RD Temporary Coping, for crown, PMMA 031.310 39

Reamer for 45° shoulder, Ø 8.0mm, Ti-N/stainless steel 046.243 185

Refill Package, f. Drill Stop Set, type A, f.drill short 12 mm/long 16 mm, for Ø 3.3 – 4.8 implants, contents 040.450S 040.454S 166

Refill Package, f. Drill Stop Set, type B, f.drill short 10 mm/long 14 mm, for Ø 3.3 – 4.8 implants, contents 040.451S 040.455S 166

Refill Package, f. Drill Stop Set, type C, f.drill short 8 mm/long 12 mm, for Ø 3.3 – 4.8 implants, contents 040.452S 040.456S 166

Refill Package, f. Drill Stop Set, type D, f.drill short 6 mm/long 10 mm, for Ø 3.3 – 4.8 implants, contents 040.453S 040.457S 166

Release aid N for Loxim™ 026.2558 171

Release aid R/W for Loxim™ 026.4558 171

Repositionable Analog, stainless steel, for Screw-retained Abutments Ø 3.5 mm 025.0007 103

Repositionable Analog, stainless steel, for Screw-retained Abutments Ø 4.6 mm 025.0008 103, 124

Repositionable Implant Analog NC 025.2102 94

Repositionable Implant Analog RC 025.4102 114

Repositionable Implant Analog RN 048.129 58

Repositionable Implant Analog WN 048.172 78

Residual Ridge Drill, Ø 1.25mm, stop = 16mm, L 37.0mm 044.126 154, 180

Retentive anchor driver, L 19mm, stainless steel 046.069 72, 184

Retentive anchor, H 3.4mm, Ti 048.439 72

RN Analog for Solid Abutment 048.540, L 14.3mm, yellow, Al 048.160 65

RN Analog for Solid Abutment 048.541, L 15.8mm, grey, Al 048.161 65

RN Analog for Solid Abutment 048.542, L 17.3mm, blue, Al 048.162 65

RN Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0009 63

RN Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0009V4 63

RN Burn-out Coping, for Variobase®, for crown, AH 6mm, POM 023.0015 63

RN Burn-out Coping, for Variobase®, for crown, AH 6mm, POM 023.0015V4 63

RN Burn-out coping, for Variobase™ Abutment, POM 048.268 63

RN Burn-out coping, for Variobase™ Abutment, POM 048.268V4 63

RN Closure cap, Ø 3.5mm, H 0mm, Ti 048.371S 20, 23, 26

RN Closure cap, Ø 3.5mm, H 0mm, Ti 048.371SV4 20, 23, 26

RN Closure cap, Ø 6mm, H 1.5mm, Ti 048.373S 20, 23, 26

RN Closure cap, Ø 6mm, H 1.5mm, Ti 048.373SV4 20, 23, 26

RN Gold Abutment, for bridge, H 12.3mm, Ceramicor®/POM/TAN 048.802 62

RN Healing cap, labial bevel, Ø 5.5mm, H 2mm, Ti 048.028S 20, 23, 26

RN Healing cap, labial bevel, Ø 5.5mm, H 3.5mm, Ti 048.029S 20, 23, 26

RN Healing cap, Ø 5.5mm, H 2mm, Ti 048.033S 20, 23, 26

RN Healing cap, Ø 5.5mm, H 3mm, Ti 048.034S 20, 23, 26

RN Healing cap, Ø 5.5mm, H 4.5mm, Ti 048.037S 20, 23, 26

RN Impression Cap, H 8mm, POM 048.017V4 58, 65

RN Locator® abutment, height 1.0 mm, titanium alloy, TiN coating 048.175 73






RN Occlusal screw, for ceramic only, L 5 mm, TAN 048.354 62, 190

RN Occlusal screw, for ceramic only, L 5 mm, TAN 048.354V4 62, 190

RN PLAN LOCATOR® Abutment, H 1mm, POM 048.275V4 91






RN PLAN Solid Abutment, H 4mm, POM 048.926V4 91

RN PLAN Solid Abutment, H 5.5mm, POM 048.927V4 91

RN PLAN Solid Abutment, H 7mm, POM 048.928V4 91

RN Plastic coping for Solid Abutment, bridge, H 10mm, POM 048.246 66

RN Plastic coping for Solid Abutment, crown, H 10mm, POM 048.245 66

RN Positioning Cylinder for Solid Abutment, for 048.540, H 10.2mm, POM 048.060V4 65



RN Protective Cap for Solid Abutment 048.540, H 5.8mm, PEEK 048.047V4 65



217

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



RN Solid Abutment 6°, H 4mm, yellow, Ti 048.540 66

RN Solid Abutment 6°, H 5.5mm, grey, Ti 048.541 66

RN Solid Abutment 6°, H 7mm, blue, Ti 048.542 66

RN Solid All-In-One Set, blue, H 7mm, for bridge 040.842 66

RN Solid All-In-One Set, blue, H 7mm, for crown 040.742 66

RN Solid All-In-One Set, gray, H 5.5mm, for bridge 040.841 66

RN Solid All-In-One Set, gray, H 5.5mm, for crown 040.741 66

RN Solid All-In-One Set, yellow, H 4mm, for bridge 040.840 66

RN Solid All-In-One Set, yellow, H 4mm, for crown 040.740 66

RN Straumann® Scanbody, PEEK/ Ti 048.068 58

RN Straumann® Variobase® for CEREC®, TAN 022.0019 61

RN synOcta® 1.5 screw-retained Abutment, H 1.5mm, TAN 048.601 64, 68, 69, 70

RN synOcta® 1.5 screw-retained PLAN Abutment, POM 048.929V4 91

RN synOcta® angled Abutment, long, Type A, angled 15°, H 6.7mm, Ti 048.610 60

RN synOcta® angled Abutment, long, Type A, angled 20°, H 6.7mm, Ti 048.615 60

RN synOcta® angled Abutment, long, Type B, angled 15°, H 6.7mm, Ti 048.611 60

RN synOcta® angled Abutment, long, Type B, angled 20°, H 6.7mm, Ti 048.616 60

RN synOcta® angled Abutment, short, Type A, angled 15°, H 5.7mm, Ti 048.612 60

RN synOcta® angled Abutment, short, Type A, angled 20°, H 5.7mm, Ti 048.617 60

RN synOcta® angled Abutment, short, Type B, angled 15°, H 5.7mm, Ti 048.613 60

RN synOcta® angled Abutment, short, Type B, angled 20°, H 5.7mm, Ti 048.618 60

RN synOcta® angled PLAN Abutment, short, Type A, angled 15°, POM 048.916V4 91

RN synOcta® angled PLAN Abutment, short, Type A, angled 20°, POM 048.918V4 91

RN synOcta® angled PLAN Abutment, short, Type B, angled 15°, POM 048.917V4 91

RN synOcta® angled PLAN Abutment, short, Type B, angled 20°, POM 048.919V4 91

RN synOcta® angled PLAN Abutment, Type A, angled 15°, POM 048.922V4 91

RN synOcta® angled PLAN Abutment, Type A, angled 20°, POM 048.924V4 91

RN synOcta® angled PLAN Abutment, Type B, angled 15°, POM 048.923V4 91

RN synOcta® angled PLAN Abutment, Type B, angled 20°, POM 048.925V4 91

RN synOcta® Cementable Abutment, for crowns/bridges, H 5.5mm, Ti 048.605 59

RN synOcta® Cementable PLAN Abutment, POM 048.930V4 91

RN synOcta® gold Abutment, crown, H 14.1mm, Ceramicor®/POM 048.642 62

RN synOcta® gold coping, bar, for synOcta 1.5, H 5.8mm, Ceramicor® 048.204 68

RN synOcta® gold coping, bridge, for synOcta 1.5, H 4.25mm, Ceramicor®/POM 048.632 64

RN synOcta® gold coping, crown, for synOcta 1.5, H 4.25mm, Ceramicor®/POM 048.633 64

RN synOcta® Impression Cap, one-part, for bar with synOcta® 1.5, H 5mm, POM 048.093V4 71

RN synOcta® impression cap, screw-retained, with integral guide screw, H 10.1mm, Al/Ti 048.010 58

RN synOcta® Impression post, with integral guide screw, H 21.0 mm, Al/Ti 048.090 58

RN synOcta® Meso Milling Cylinder, for synOcta® 1.5, crown, H 10mm, D 8mm, Ti 048.571 64

RN synOcta® Milling Cylinder, Bridge, for synOcta® 1.5, D 6mm, H 8mm, Ti 048.241 64

RN synOcta® Milling Cylinder, Crown, for synOcta® 1.5, D 6mm, H 8mm, Ti 048.240 64

RN synOcta® Plastic Coping for 048.605, for bridge, H 7mm, POM 048.662 59

RN synOcta® Plastic Coping for 048.605, for crown, H 7mm, POM 048.663 59

RN synOcta® Plastic Coping for synOcta® 1.5, for bridge/bar, H 10mm, POM 048.227 64, 70

RN synOcta® Plastic Coping for synOcta® 1.5, for crown, H 10mm, POM 048.229 64

RN synOcta® Positioning Cylinder, H 12mm, POM 048.070V4 58

RN synOcta® Post for temporary restorations, for bridge, H 9mm, Ti 048.716 59

RN synOcta® Post for temporary restorations, for crown, H 9mm, Ti 048.715 59

RN synOcta® Ti Coping, Bar for synOcta® 1.5, H 6mm, Ti 048.214 69

RN synOcta® Transversal PLAN Abutment, POM 048.921V4 91

RN Temporary abutment, D 7mm, H 10mm, VITA CAD-Temp® 048.664 59

RN Temporary Coping for Solid Abutment, bridge, H 8.5mm, PMMA 048.654 65

RN Temporary Coping for Solid Abutment, crown, H 8.5mm, PMMA 048.655 65

RN Variobase® Abutment, with screw, D 5.05mm, H 4mm, TAN 048.710 61, 63

RN Variobase®, for crown, with screw, Ø 5.05mm, H 6mm, TAN 022.0022 61, 63

RN Variobase™, for bridge/bar, with screw, Ø 5.5mm, H 3.5mm, TAN 022.0003 61, 63

RN Wax-up Hülse, L 16.3 mm, PEEK 048.088-04 61

RN Wax-up sleeve, L 16.3 mm, PEEK 048.088 61

Round bur, Ø 1.4mm, stainless steel 044.022 167



S/SP Tap f. handpiece, Ø 3.3mm, guided, L 42mm, stainless steel 034.245 174



S/SP Tap for adapter, Ø 3.3mm, L 23mm, PEEK/stainless steel 044.575 169

Alphabetical index






218

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde





Screwdriver blade 1.5 for screw-holding device 1.5 046.256 154, 180

Screwdriver for titanium matrix, L 50mm, stainless steel 048.452 72, 184

Screwdriver handle 1.5 046.258 154, 180

Screwdriver handle 1.5 with blade and, screw-holding dev. for crosshead screws 040.360 154, 180

Screwdriver handle for 046.410/411/412, L 109mm, stainless steel 046.085 184

Screwdriver, L 37mm, stainless steel 046.154 72, 184

Screw-holding device 1.5 046.257 154, 180

SCS Guide screw for 048.240/241, can be shortened by 2 mm, L 8 mm, Ti 048.363V4 64, 190

SCS Guide screw for 048.240/241, cannot be shortened, L 8 mm, Ti 048.362V4 64, 190

SCS Guide screw for RN synOcta® Bar coping, can be shortened by 1.6 mm, L 6 mm, Ti 048.361V4 190

SCS Guide screw for RN synOcta® Bar coping, cannot be shortened, L 6 mm, Ti 048.360V4 190

SCS Guide screw, can be shortened by 2 mm, L 10 mm, Ti 048.364V4 190



SCS Guiding cylinder for NN implant Ø 3.3mm, L 5mm, Ti/stainless steel 049.182 178

SCS Guiding cylinder for NNC implant Ø 3.3mm, L 10.1mm, stainless steel 049.360 178

SCS Occlusal screw for guiding sleeve, and post for temp. restorations, L 7.6 mm, TAN 049.181 59, 79, 178, 190

SCS Occlusal screw, L 4.4mm, Ti 048.350 60, 64, 68, 69, 70, 84, 178, 181,

182, 190

SCS Occlusal screw, L 4.4mm, Ti 048.350V4 60, 64, 68, 69, 70, 84, 181, 182,

190

SCS Screwdriver for handpiece, long, L 32mm, stainless steel 046.412 172, 184

SCS Screwdriver for handpiece, short, L 26mm, stainless steel 046.411 172, 184

SCS Screwdriver for handpiece, x-short, L 20mm, stainless steel 046.410 172, 184

SCS Screwdriver, for ratchet, long, L 27mm, stainless steel 046.402 86, 172, 184

SCS Screwdriver, for ratchet, short, L 21mm, stainless steel 046.401 86, 172, 184

SCS Screwdriver, for ratchet, x-short, L 15mm, stainless steel 046.400 86, 172, 184

Service instrument for ratchet, L 50mm, stainless steel 046.108 171, 184

Set 5:1 Bone Level Implant 120.0033 192

Shoulder Analog for WN Solid Abutment, L 10mm, Al 048.140 85

Solid abut.driver, long, f. RN solid abut.6°, L 19mm, stainless steel 046.068 67, 184

Solid abut.driver, short, f. RN solid abut.6°, L 13mm, stainless steel 046.067 67, 184

SP Profile drill, Ø 3.3mm, RN, guided, L 35mm, stainless steel 034.235 174

SP Profile drill, Ø 4.1mm, RN, guided, L 35mm, stainless steel 034.435 174

SP Profile drill, RN, long, Ø 2.8mm, L 34mm, stainless steel 044.087 168

SP Profile drill, RN, long, Ø 3.5mm, L 34mm, stainless steel 044.089 168

SP Profile drill, RN, short, Ø 2.8mm, L 25mm, stainless steel 044.086 168

SP Profile drill, RN, short, Ø 3.5mm, L 25mm, stainless steel 044.088 168

SP Profile drill, WN, long, Ø 4.2mm, L 34mm, stainless steel 044.085 168

SP Profile drill, WN, short, Ø 4.2mm, L 25mm, stainless steel 044.084 168

Spare lamella retention insert, H 2.6mm, Elitor® 048.457 72

Spring for titanium matrix, stainless steel 048.455V4 72

Stabilization pin, f.RN synOcta® gold copings, L 11mm, stainless steel 048.208V4 71

Standard Implant Ø 3.3mm RN, SLActive® 10mm, Roxolid® guided 033.432G 18



Standard Implant, Ø 3.3mm RN, SLA® 10mm, Roxolid®, Loxim™ 043.256S 19





Standard Implant, Ø 3.3mm RN, SLActive® 10mm, Roxolid®, Loxim™ 033.502S 18





Standard Implant, Ø 4.1 RN, SLActive® 10mm, Roxolid®, guided 033.532G 21



Standard Implant, Ø 4.1mm RN, SLA® 10mm, Roxolid® Loxim™ 043.157S 22




219

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x





















Standard Implant, Ø 4.8mm WN, SLA® 10mm, Roxolid®, Loxim™ 043.608S 25




Standard Implant, Ø 4.8mm WN, SLActive® 10mm, Roxolid®, Loxim™ 033.602S 24




Standard Plus Implant Ø 3.3mm RN, SLActive® 10mm, Roxolid® guided 033.452G 18



Standard Plus Implant, Ø 3.3mm NNC, SLA® 10mm, Roxolid®, Loxim™ 043.417S 19




Standard Plus Implant, Ø 3.3mm NNC, SLActive® 10mm, Roxolid® 033.417S 18




Standard Plus Implant, Ø 3.3mm RN, SLA® 10mm, Roxolid®, Loxim™ 043.261S 19




Standard Plus Implant, Ø 3.3mm RN, SLActive® 10mm, Roxolid®, Loxim™ 033.512S 18




Standard Plus Implant, Ø 4.1 RN, SLActive® 10mm, Roxolid®, guided 033.562G 21




















Alphabetical index






220

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde











Standard Plus Implant, Ø 4.8mm WN, SLA® 10mm, Roxolid®, Loxim™ 043.657S 25




Standard Plus Implant, Ø 4.8mm WN, SLActive® 10mm, Roxolid®, Loxim™ 033.612S 24





Stepped pin for 049.810, Ø 2.2mm/3.5mm, L 16mm, Ti 049.818V4 189

Stop key for guided implants, S/SP/TE/BL, stainless steel 034.006 175

Storage System for implants (SLA & SLActive), 280 x 226 x 248 mm, plastic 041.500 183

Storage System for Prosthetics, 280 x 226 x 248mm, plastic 041.501 187

Straumann® Basic Surgical Cassette 040.564 171

Straumann® Basic Surgical Cassette, guided 034.281 176

Straumann® BoneCeramic™ 400-700 µm, 0.25 g 070.203 148



Straumann® Emdogain® 0.15 ml 075.098 153


Straumann® Emdogain® 0.3 ml Multipack 075.114 153


Straumann® Emdogain® 0.7 ml Multipack 075.116 153

Straumann® Emdogain® PLUS 075.117 153

Straumann® Planning Guide 026.0016 104, 124

Straumann® PrefGel® 5 x 0.6 ml, syringe 075.203 153

Straumann® PURE Ceramic Implant (Monotype), Ø 3.3mm ND, ZLA™ 10mm, AH 4mm, ZrO2 031.002S 36

Straumann® PURE Ceramic Implant (Monotype), Ø 3.3mm ND, ZLA™ 10mm, AH 5.5mm, ZrO2 031.012S 36







Straumann® PURE Ceramic Implant (Monotype), Ø 4.1mm RD, ZLA™ 10mm, AH 4mm, ZrO2 031.022S 38

Straumann® PURE Ceramic Implant (Monotype), Ø 4.1mm RD, ZLA™ 10mm, AH 5.5mm, ZrO2 031.032S 38







Straumann® Standard Plus NNC implant, 5:1 Model Box 140.122 192

Straumann® surgical cassette 040.165 171

Surgical cassette, for guided surgery 034.001 176

synOcta® Basal screw, L 6,7 mm, TAN 048.356 59, 62, 63, 79, 81, 82, 83, 190

Tap for transversal screw retention, M2 x 0.25mm, stainless steel 044.570 186

Tapered Effect Implant, Ø 3.3mm RN, SLA® 10mm, Roxolid®, Loxim™ 043.265S 19

Tapered Effect Implant, Ø 3.3mm RN, SLA® 12mm, Roxolid®,Loxim™ 043.266S 19



Tapered Effect Implant, Ø 3.3mm RN, SLActive® 10mm, Roxolid®, Loxim™ 033.522S 18




Tapered Effect Implant, Ø 4.1 mm, RN, SLA 10.0 mm, steel, cardboard 140.062 192

Tapered Effect Implant, Ø 4.1 RN, SLActive® 10mm, Roxolid®, guided 033.572G 21

221

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x













Tapered Effect Implant, Ø 4.8mm WN, SLA® 10mm, Roxolid®, Loxim™ 043.660S 25



Tapered Effect Implant, Ø 4.8mm WN, SLActive® 10mm, Roxolid®, Loxim™ 033.622S 24



TE Profile drill, Ø 3.3mm, RN, guided, L 37mm, stainless steel 034.237 174

TE Profile drill, Ø 4.1mm, RN, guided, L 37mm, stainless steel 034.437 174

TE Profile drill, RN, long, Ø 2.8mm, L 37mm, stainless steel 044.708 168

TE Profile drill, RN, long, Ø 3.5mm, L 37mm, stainless steel 044.712 168

TE Profile drill, RN, short, Ø 2.8mm, L 28mm, stainless steel 044.701 168

TE Profile drill, RN, short, Ø 3.5mm, L 28mm, stainless steel 044.705 168

TE Profile drill, WN, long, Ø 4.2mm, L 37mm, stainless steel 044.710 168

TE Profile drill, WN, short, Ø 4.2mm, L 28mm, stainless steel 044.703 168

TempImplant Bendingtool, L 82.0 mm, H 21.0 mm, stainless steel 80356 42

TempImplant Inserting device, manual, L 19mm, stainless steel 80398 42

TempImplant Inserting device, mechanical, L 21.5mm, stainless steel 80363 42

TempImplant, Ø 2.0mm, L 10.0mm, Ti-6AI-7Nb 80371SV4 42

TempImplant, Ø 2.0mm, L 12.0mm, Ti-6AI-7Nb 80372SV4 42

Template fixation pin, Ø 2.8mm/2.8mm, guided, L 25mm, stainless steel 034.256 175



Template fixation pin, Ø 5mm/4.2mm, guided, L 24mm, stainless steel 034.655 175

Threaded sleeve for mounting part for 048.450, H 2.2mm, POM 048.454V4 72

Tissue Level PLAN cassette, empty, 278x124x33mm, polymer 048.905 90

Tissue Level PLAN Set, 278x124x33 mm, PC 048.904 90

Titanium bar matrix incl. spacer, mini, H 3.5 mm, L 50 mm, Ti/brass 048.471 69, 70, 108, 109, 128, 129

Titanium bar matrix, incl. spacer, regular, H 4.5 mm, L 50 mm, Ti/brass 048.470 69, 70, 108, 109, 128, 129

Titanium bar, egg-shaped cross-section, mini, H 2,3 mm, L 50 mm, Ti 048.466 69, 108, 128

Titanium bar, egg-shaped cross-section, regular, H 3 mm, L 50 mm, Ti 048.465 69, 108, 128

Titanium matrix for retentive anchor, H 3.1mm, Ti 048.450 72

Torque control device for ratchet, stainless steel 046.049 171, 184

TPS Occlusal screw, L 8 mm 048.312C 141

Transfer aid for 048.605, H 6,5 mm, PC 048.059V4 59

Transfer aid for 048.606, H 6,5 mm, PC 048.054V4 79

Transfer aid for RN synOcta®, angled, long, H 4 mm, PC 048.002V4 60

Transfer aid for RN synOcta®, angled, short, H 5.5 mm, PC 048.000V4 60

Transfer aid for WN synOcta®, angled, H 5 mm, PC 048.032 80

Transfer and Alignment Pin, for Screw-retained Abutments, TAN 025.0009 104, 124

Transfer pin for retentive anchor, L 18mm, stainless steel 048.109 42, 72

Transversal screw for 048.620, D 2 mm, L 3 mm, TAV 049.154 141

Tray for cassette 041.022, 218x109x16 mm, Al 041.211 188

Trephine 6mm BO-33002 155

Trephine 7mm BO-33003 155

TS Gold coping for Octa 048.232C 141

TS Superstructure for Octa 048.448C 141

T-sleeve, Ø 2.8mm, H 6mm, guided, stainless steel 034.055V4 173

T-sleeve, Ø 5mm, H 5mm, guided, stainless steel 034.053V4 173

Tweezers with titanium plasma-coated tips, L 105mm, Ti/stainless steel 046.095 171

Tweezers without titanium plasma-coated tips, L 105mm, stainless steel 046.057 171

Twist drill PRO, long, Ø 3.5mm, L 41mm, stainless steel 044.251 167

Twist drill PRO, long, Ø 4.2mm, L 41mm, stainless steel 044.255 167

Twist drill PRO, Ø 2.8mm, long, 20mm, guided, L 36mm, stainless steel 034.226 173

Twist drill PRO, Ø 2.8mm, short, 16mm, guided, L 32mm, stainless steel 034.223 173

Twist drill PRO, Ø 2.8mm, x-long, 24mm, guided, L 40mm, stainless steel 034.229 173

Alphabetical index






222

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde





Twist drill PRO, Ø 3.5mm,x-long, 24mm, guided, L 40mm, stainless steel 034.429 173



Twist drill PRO, Ø 4.2mm,x-long, 24mm, guided, L 40mm, stainless steel 034.629 173

Twist drill PRO, short, Ø 3.5mm, L 33mm, stainless steel 044.250 167

Twist drill PRO, short, Ø 4.2mm, L 33mm, stainless steel 044.254 167

Ultrasonic Cleaning Cassette, 150 x 65 x 25 mm, plastic/silicone 040.175 183

WN Analog for Solid Abutment 048.545, L 16mm, green, Al 048.165 85

WN Analog for Solid Abutment 048.546, L 17.5mm, brown, Al 048.166 85

WN Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0010 83

WN Burn-out Coping, for Variobase® for Bridge/Bar, POM 023.0010V4 83

WN Burn-out Coping, for Variobase®, for crown, AH 6.5mm, POM 023.0016 83

WN Burn-out Coping, for Variobase®, for crown, AH 6.5mm, POM 023.0016V4 83

WN Burn-out coping, for Variobase™ Abutment, POM 048.269 83

WN Burn-out coping, for Variobase™ Abutment, POM 048.269V4 83

WN Closure cap, Ø 4.3mm, H 0mm, Ti 048.375S 26

WN Gold Abutment, for bridge, H 12.5mm, Ceramicor®/POM/TAN 048.803 82

WN Healing cap, labial bevel, Ø 7.2mm, H 2mm, Ti 048.030S 26

WN Healing cap, Ø 7.2mm, H 2mm, Ti 048.038S 26

WN Healing cap, Ø 7.2mm, H 3mm, Ti 048.039S 26

WN Healing cap, Ø 7.2mm, H 4.5mm, Ti 048.053S 26

WN Impression Cap, H 8mm, POM 048.013 78, 85

WN Locator®, abutment, tissue cuff height 4.0 mm, titanium alloy, TiNcoating 048.186 87

WN Locator®, abutment, tissue cuff height 5.0 mm, titanium alloy, TiNcoating 048.187 87

WN Locator®, solid abutment, tissue cuff height 1.0 mm, titanium alloy,TiN coating 048.183 87

WN Locator®, solid abutment, tissue cuff height 3.0 mm, titanium alloy,TiN coating 048.185 87

WN Locator®, solid abutment, tissue cuff, height 2.0mm, titanium alloy,TiN coating 048.184 87

WN PLAN LOCATOR® Abutment, H 1mm, POM 048.283V4 92





WN PLAN Solid Abutment 6°, H 4mm, green, POM 048.938V4 92

WN PLAN Solid Abutment 6°, H 5.5mm, brown, POM 048.939V4 92

WN Plastic coping for Solid Abutment, bridge, H 7mm, POM 048.248 86

WN Plastic coping for Solid Abutment, crown, H 7mm, POM 048.247 86

WN Positioning Cylinder for Solid Abutment, for 048.545, H 10mm, POM 048.065 85

WN Positioning Cylinder for Solid Abutment, for 048.546, H 10mm, POM 048.066 85

WN Protective Cap for Solid Abutment 048.545, H 6mm, PEEK 048.051 85

WN Protective Cap for Solid Abutment 048.546, H 7.5mm, PEEK 048.052 85

WN Solid Abutment 6°, H 4mm, green, Ti 048.545 86

WN Solid Abutment 6°, H 5.5mm, brown, Ti 048.546 86

WN Solid All-In-One Set, brown, H 5.5mm, for bridge 040.846 86

WN Solid All-In-One Set, brown, H 5.5mm, for crown 040.746 86

WN Solid All-In-One Set, green, H 4mm, for bridge 040.845 86

WN Solid All-In-One Set, green, H 4mm, for crown 040.745 86

WN Straumann® Scanbody, PEEK/ Ti 048.069 78

WN Straumann® Variobase® for CEREC®, TAN 022.0020 80

WN synOcta® 1.5 screw-retained Abutment, H 1.5mm, TAN 048.603 84

WN synOcta® 1.5 screw-retained PLAN Abutment, POM 048.931V4 91

WN synOcta® Analog, L 12mm, stainless steel 048.171 78

WN synOcta® angled Abutment, Type A, angled 15°, H 5.5mm, Ti 048.608 80

WN synOcta® angled Abutment, Type B, angled 15°, H 5.5mm, Ti 048.609 80

WN synOcta® angled PLAN Abutment, Type A, angled 15°, POM 048.933V4 91

WN synOcta® angled PLAN Abutment, Type B, angled 15°, POM 048.934V4 91

WN synOcta® Cementable Abutment, H 5.5mm, Ti 048.606 79

WN synOcta® Cementable PLAN Abutment, POM 048.932V4 91

WN synOcta® gold Abutment, crown, H 14.1mm, Ceramicor®/POM 048.644 82

WN synOcta® gold coping, bridge, for synOcta 1.5, H 4.75mm, Ceramicor®/POM 048.638 84

WN synOcta® gold coping, crown, for synOcta 1.5, H 4.75mm, Ceramicor®/POM 048.639 84

WN synOcta® impression cap, screw-retained, with integral guide screw, H 10mm, Al 048.091 78

WN synOcta® Meso Milling Cylinder, for synOcta® 1.5, crown, H 10mm, D 10mm, Ti 048.573 84

WN synOcta® Plastic Coping for 048.606, for bridge, H 7.35mm, POM 048.244 79

223

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



WN synOcta® Plastic Coping for 048.606, for crown, H 7.35mm, POM 048.243 79

WN synOcta® Plastic Coping, Bridge, H 10mm, POM 048.666 84

WN synOcta® Plastic Coping, Crown, H 10mm, POM 048.667 84

WN synOcta® Positioning Cylinder, H 12mm, POM 048.095 78

WN synOcta® Post for temporary restorations, for bridge, H 9mm, Ti 048.718 79

WN synOcta® Post for temporary restorations, for crown, H 9mm, Ti 048.717 79

WN Temporary abutment, D 10mm, H 10mm, VITA CAD-Temp® 048.242 79

WN Temporary Coping for Solid Abutment, bridge, H 7.3mm, PMMA 048.656 85

WN Temporary Coping for Solid Abutment, crown, H 7.3mm, PMMA 048.657 85

WN Variobase® Abutment, with screw, D 7mm, H 4.5mm, TAN 048.711 80, 83

WN Variobase®, for crown, with screw, Ø 7mm, H 6.5mm, TAN 022.0023 80, 83

WN Variobase™, for bridge/bar, with screw, Ø 7mm, H 4.8mm, TAN 022.0004 80, 83

WN Wax-up Hülse, L 16.4 mm, PEEK 048.089-04 80

WN Wax-up sleeve, L 16.4 mm, PEEK 048.089 80

X-ray reference sphere, Ø 5.0mm, stainless steel 049.076V4 164, 189

x-ray template for Bone Level Implants 150.216 164

x-ray template for Standard and Standard Plus Implants 150.215 164

X-ray templates for Tapered Effect Implant 150.230 164

Alphabetical index






224

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

xIndexIndex by item number

Index by item number

Art.No. Product texts Page

021.2208G Bone Level Implant, Ø 3.3 mm, NC, SLActive 8 mm, Roxolid, guided 28



021.2308 Bone Level Implant Ø 3.3mm NC, SLActive® 8mm, Roxolid® Loxim™ 28




021.2508 Bone Level Implant, Ø 3.3mm NC, SLA® 8mm, Roxolid®, Loxim™ 28




021.3308 Bone Level Tapered Implant, Ø 3.3mm NC, SLActive® 8mm, Roxolid®, Loxim™ 28





021.3508 Bone Level Tapered Implant, Ø 3.3mm NC, SLA® 8mm, Roxolid®, Loxim™ 28





021.4308 Bone Level Implant Ø 4.1mm RC, SLActive® 8mm, Roxolid® Loxim™ 30

021.4308G Bone Level Implant, Ø 4.1mm RC SLActive® 8mm, Roxolid®, guided 30



021.4312 Bone Level Implant Ø 4.1mm RC, SLActive® 12mm, Roxolid® Loxim® 30



021.4508 Bone Level Implant, Ø 4.1mm RC, SLA® 8mm, Roxolid®, Loxim™ 30




021.5308 Bone Level Tapered Implant, Ø 4.1mm RC, SLActive® 8mm, Roxolid®, Loxim™ 30





021.5508 Bone Level Tapered Implant, Ø 4.1mm RC, SLA® 8mm, Roxolid®, Loxim™ 30


























022.0000 NC Variobase™, for bridge/bar, with screw, Ø 4.5mm, H 3.5mm, TAN 100, 102

022.0001 RC Variobase™, for bridge/bar, with screw, Ø 4.5mm, H 3.5mm, TAN 120, 123

022.0002 NNC Variobase™, for bridge/bar, with screw, Ø 4.2mm, H 3.5mm, TAN 50, 51

225

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

IndexIndex by item number


022.0003 RN Variobase™, for bridge/bar, with screw, Ø 5.5mm, H 3.5mm, TAN 61, 63

022.0004 WN Variobase™, for bridge/bar, with screw, Ø 7mm, H 4.8mm, TAN 80, 83

022.0010P NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 5.5mm, Type A, Pin 105

022.0011P NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 5.5mm, Type B, Pin 105



022.0014P RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 5.5mm, Type A, Pin 125

022.0015P RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 5.5mm, Type B, Pin 125


022.0017P RC Screw-retained Abutment, TAN, angled 30°, D 4.6mm, GH 5.5mm, Type B, Pin 125

022.0019 RN Straumann® Variobase® for CEREC®, TAN 61

022.0020 WN Straumann® Variobase® for CEREC®, TAN 80

022.0021 NNC Variobase®, for crown, with screw, Ø 3.9mm, H 5.75mm, TAN 50, 51

022.0022 RN Variobase®, for crown, with screw, Ø 5.05mm, H 6mm, TAN 61, 63

022.0023 WN Variobase®, for crown, with screw, Ø 7mm, H 6.5mm, TAN 80, 83

022.0024 RC Straumann® Variobase® for CEREC®, TAN 120

022.0025 NC Straumann® Variobase® for CEREC®, TAN 100

022.0026 RC Variobase®, for crown, with screw, Ø 4.5mm, H 5.5mm, TAN 120, 123

022.0027 NC Variobase®, for crown, with screw, Ø 3.8mm, H 5.5mm, TAN 100, 102

022.0045 Basal Screw RN/WN Variobase®, TAN 62, 63, 81, 83

022.2102 NC Anatomic Abutment, straight, GH 2mm, Ti 95

022.2104 NC Anatomic Abutment, straight, GH 3.5mm, Ti 95

022.2152 NC Anatomic Abutment, angled 15°, GH 2mm, Ti 95

022.2154 NC Anatomic Abutment, angled 15°, GH 3.5mm, Ti 95

022.2311 NC Cementable Abutment, D 3.5mm, GH 1mm, AH 4mm, Ti 97



022.2315 NC Cementable Abutment, D 3.5mm, GH 1mm, AH 5.5mm, Ti 97



022.2321 NC Cementable Abutment, D 5mm, GH 1mm, AH 4mm, Ti 97



022.2325 NC Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, Ti 97



022.2410 NC Gold Abutment, for crown, H 3.7mm, Ceramicor®/POM 101

022.2502 NC LOCATOR® Abutment, height 2 mm, Ti alloy with TiN coating 110





022.2701 NC Abutment for bars, gold, H 10mm, Ceramicor® 107

022.2702 NC Abutment, for bars, Ti 108

022.2745P NC Screw-retained Abutment, TAN, straight 0°, Ø 3.5mm, GH 1mm, Pin 104

022.2746P NC Screw-retained Abutment, TAN, straight 0°, Ø 3.5mm, GH 2.5mm, Pin 104


022.2748P NC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 2.5mm, Pin 104







022.2755P NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type A, Pin 104

022.2756P NC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type B, Pin 105

022.2757P NC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type A, Pin 105

022.2758P NC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type B, Pin 105

022.2812 NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 0, ZrO2 95

022.2814 NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 0, ZrO2 95

022.2822 NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 2mm, MO 0, ZrO2 95

022.2824 NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 3.5mm, MO 0, ZrO2 95

022.2832 NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 1, ZrO2 95

022.2834 NC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 1, ZrO2 95

022.2842 NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 2mm, MO 1, ZrO2 95

022.2844 NC Straumann® Anatomic IPS e.max® Abutment, angled 15°, GH 3.5mm, MO 1, ZrO2 95


226

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



022.4102 RC Anatomic Abutment, straight, GH 2mm, Ti 115

022.4104 RC Anatomic Abutment, straight, GH 3.5mm, Ti 115

022.4152 RC Anatomic Abutment, angled 15°, GH 2mm, Ti 115

022.4154 RC Anatomic Abutment, angled 15°, GH 3.5mm, Ti 115

022.4321 RC Cementable Abutment, D 5mm, GH 1mm, AH 4mm, Ti 116



022.4325 RC Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, Ti 117



022.4331 RC Cementable Abutment, D 6.5mm, GH 1mm, AH 4mm, Ti 117



022.4335 RC Cementable Abutment, D 6.5mm, GH 1mm, AH 5.5mm, Ti 117



022.4410 RC Gold Abutment, for crown, H 3.8mm, Ceramicor®/POM 122

022.4430 RC Gold Abutment, for bridge, H 5.4mm, Ceramicor®/POM 122

022.4501 RC LOCATOR® Abutment, height 1 mm, Ti alloy with TiN coating 130






022.4701 RC Abutment for bars, gold, H 10mm, Ceramicor® 127

022.4702 RC Abutment, for bars, Ti 128

022.4745P RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 1mm, Pin 125

022.4746P RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 2.5mm, Pin 125





022.4751P RC Screw-retained Abutment, TAN, straight 0°, Ø 4.6mm, GH 4mm, Pin 125

022.4752P RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type A, Pin 125

022.4753P RC Screw-retained Abutment, TAN, angled 17°, Ø 4.6mm, GH 4mm, Type B, Pin 125

022.4754P RC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type A, Pin 125

022.4755P RC Screw-retained Abutment, TAN, angled 30°, Ø 4.6mm, GH 4mm, Type B, Pin 125

022.4812 RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 0, ZrO2 115

022.4814 RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 0, ZrO2 115

022.4822 RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 2mm, MO 0, ZrO2 115

022.4824 RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 3.5mm, MO 0, ZrO2 115

022.4832 RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 2mm, MO 1, ZrO2 115

022.4834 RC Straumann® Anatomic IPS e.max® Abutment, straight, GH 3.5mm, MO 1, ZrO2 115

022.4842 RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 2mm, MO 1, ZrO2 115

022.4844 RC Straumann® Anatomic IPS e.max® Abutment, angled, 15°, GH 3.5mm, MO 1, ZrO2 115

023.0000 NC Variobase™ Coping,f.Scr.-ret.Abt.Ø3.5mm, with screw, Ø 4.2mm, H 3.5mm, TAN 100, 102

023.0001 NC/RC Variobase™ Cop.,f.Scr.-ret.Abt.Ø4.6mm, with screw, Ø 5.1mm, H 3.5mm, TAN 100, 102, 120, 123

023.0004 NC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 3.5mm, POM 102

023.0004V4 NC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 3.5mm, POM 102

023.0005 NC/RC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 4.6mm, POM 102, 123

023.0005V4 NC/RC Burn-out Coping for Variobase® Coping, for Screw-retained Abutment Ø 4.6mm, POM 102, 123

023.0006 NC Burn-out Coping, for Variobase® for Bridge/Bar, POM 102

023.0006V4 NC Burn-out Coping, for Variobase® for Bridge/Bar, POM 102

023.0007 RC Burn-out Coping, for Variobase® for Bridge/Bar, POM 123

023.0007V4 RC Burn-out Coping, for Variobase® for Bridge/Bar, POM 123

023.0008 NNC Burn-out Coping, for Variobase® for Bridge/Bar, POM 51

023.0008V4 NNC Burn-out Coping, for Variobase® for Bridge/Bar, POM 51

023.0009 RN Burn-out Coping, for Variobase® for Bridge/Bar, POM 63

023.0009V4 RN Burn-out Coping, for Variobase® for Bridge/Bar, POM 63

023.0010 WN Burn-out Coping, for Variobase® for Bridge/Bar, POM 83

023.0010V4 WN Burn-out Coping, for Variobase® for Bridge/Bar, POM 83

023.0014 NNC Burn-out Coping, for Variobase®, for crown, AH 5.75mm, POM 51

023.0014V4 NNC Burn-out Coping, for Variobase®, for crown, AH 5.75mm, POM 51

023.0015 RN Burn-out Coping, for Variobase®, for crown, AH 6mm, POM 63

023.0015V4 RN Burn-out Coping, for Variobase®, for crown, AH 6mm, POM 63

023.0016 WN Burn-out Coping, for Variobase®, for crown, AH 6.5mm, POM 83


227

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



023.0016V4 WN Burn-out Coping, for Variobase®, for crown, AH 6.5mm, POM 83

023.0017 RC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 123

023.0017V4 RC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 123

023.0018 NC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 102

023.0018V4 NC Burn-out Coping, for Variobase®, for crown, AH 5.5mm, POM 102

023.2310 NC Coping, for bridge on Cementable Abutment, D 3.5mm, POM 97

023.2316 NC Coping, for crown on Cementable Abutment, D 3.5mm, POM 97

023.2320 NC Coping, for bridge on Cementable Abutment, D 5mm, POM 97

023.2326 NC Coping, for crown on Cementable Abutment, D 5mm, POM 97

023.2747 NC Coping for screw-retained abutment, Ti, Crown, D 3.5mm 106

023.2748 NC Burn-out coping for screw-retained abutment, POM, Crown, D 3.5mm 106

023.2749 NC Coping for screw-retained abutment, Ti, Bridge, D 3.5mm 106

023.2750 NC Coping for screw-retained abutment, Ti, Bar, D 3.5mm 108

023.2751 NC Coping for screw-retained abutment, Crown, Ø 3.5mm, Ceramicor®/POM 106

023.2752 NC Coping for screw-retained abutment, Bridge, Ø 3.5mm, Ceramicor®/POM 106

023.2753 NC Coping for screw-retained abutment, Bar, Ø 3.5mm, Ceramicor® 107

023.2754 NC Analog for screw-retained abutment, TAN, straight 0°, D 3.5mm 103

023.2755 NC Burn-out coping f. screw-retained abut., POM, Bridge/Bar, D 3.5mm 106, 109

023.2756 NC Burn-out coping, for Variobase™ Abutment, POM 102

023.2756-04 NC Burn-out coping, for Variobase™ Abutment, POM 102

023.4320 RC Coping, for bridge on Cementable Abutment, D 5mm, POM 117

023.4326 RC Coping, for crown on Cementable Abutment, D 5mm, POM 117

023.4330 RC Coping, for bridge on Cementable Abutment, D 6.5mm, POM 117

023.4336 RC Coping, for crown on Cementable Abutment, D 6.5mm, POM 117

023.4747 NC/RC Coping for screw-retained abutment, Ti, Crown, D 4.6mm 106, 126

023.4748 NC/RC Burn-out coping for screw-retained abutment, POM, Crown, D 4.6mm 106, 126

023.4749 NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 1mm 105, 125, 191

023.4750 NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 2.5mm 105, 125, 191

023.4751 NC/RC Coping for screw-retained abutment, Ti, Bridge, D 4.6mm 106, 126

023.4752 NC/RC Coping for screw-retained abutment, Ti, Bar, D 4.6mm 108, 128

023.4753 NC/RC Coping for screw-retained abutment, Crown, Ø 4.6mm, Ceramicor®/POM 106, 126

023.4754 NC/RC Coping for screw-retained abutment, Bridge, Ø 4.6mm, Ceramicor®/POM 106, 126

023.4755 NC/RC Coping for screw-retained abutment, Bar, Ø 4.6mm, Ceramicor® 107, 127

023.4756 NC/RC Analog for screw-retained abutment, TAN, straight 0°, D 4.6mm 103, 124

023.4757 NC/RC Analog for screw-retained abutment, TAN, angled 17°/30°, D 4.6mm 103, 124

023.4758 NC/RC Burn-out coping f. screw-retained abut., POM, Bridge/Bar, D 4.6mm 106, 109, 126, 129

023.4759 RC Burn-out coping, for Variobase™ Abutment, POM 123

023.4759-04 RC Burn-out coping, for Variobase™ Abutment, POM 123

023.4760 NC/RC Screw for screw-retained abutment, TAN, straight 0°, GH 4mm 105, 125, 191

023.4763 NC/RC Occlusal screw, TAN, for coping, screw-retained abutment 101, 102, 106, 107, 108, 109,

121, 123, 126, 127, 128, 129,

191

024.0000S RC Healing abutment, conical shape, Ø 4.5mm, H 2mm, Ti 31, 33



024.0003S RC Healing abutment, conical shape, Ø 6mm, H 2mm, Ti 31, 33



024.2100S NC Closure cap, Ø 2.8mm, H 0mm, Ti 29

024.2100S-04 NC Closure cap, Ø 2.8mm, H 0mm, Ti 29

024.2105S NC Closure cap, Ø 3.1mm, H 0.5mm, Ti 29

024.2105S-04 NC Closure cap, Ø 3.1mm, H 0.5mm, Ti 29

024.2222S NC Healing abutment, conical shape, Ø 3.6mm, H 2mm, Ti 29

024.2224S NC Healing abutment, conical shape, Ø 3.6mm, H 3.5mm, Ti 29


024.2234S NC Healing abutment, bottle shape, Ø 3.3mm, H 3.5mm, Ti 29

024.2236S NC Healing abutment, bottle shape, Ø 3.3mm, H 5mm, Ti 29


024.2244S NC Healing abutment, conical shape, Ø 4.8mm, H 3.5mm, Ti 29


024.2270S NC Healing abutment, customizable, Ø 5mm, H 7mm, PEEK 29

024.2312-04 NC Protective Cap, for Cementable Abutment, D 3.5mm, AH 4mm, PEEK 96

024.2316-04 NC Protective Cap, for Cementable Abutment, D 3.5mm, AH 5.5mm, PEEK 96

024.2322-04 NC Protective Cap, for Cementable Abutment, D 5mm, AH 4mm, PEEK 96

024.2323-04 NC Protective cap for screw-retained abutment, Ø 3.5mm, H 5mm, PEEK/TAN 103

024.2324-04 NC Protective cap for screw-retained abutment, Ø 3.5mm, H 6.5mm, PEEK/TAN 103


228

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



024.2325-04 NC Protective cap for screw-retained abutment, Ø 3.5mm, H 8mm, PEEK/TAN 103

024.2326-04 NC Protective Cap, for Cementable Abutment, D 5mm, AH 5.5mm, PEEK 96

024.2346 NC Temporary Coping, for Cementable Abutment, D 3.5mm, PMMA 96

024.2356 NC Temporary Coping, for Cementable Abutment, D 5mm, PMMA 96

024.2371 NC Temporary Abutment, Crown, D 3.5mm, H 11mm, TAN 94

024.2372 NC Temporary abutment, D 5mm, H 12mm, VITA CAD-Temp® 94

024.2375 NC Temporary Abutment, Bridge, D 3.5mm, H 11mm, TAN 94

024.4100S RC Closure cap, Ø 3.3mm, H 0mm, Ti 31, 33

024.4100S-04 RC Closure cap, Ø 3.3mm, H 0mm, Ti 31, 33

024.4105S RC Closure cap, Ø 3.5mm, H 0.5mm, Ti 31, 33

024.4105S-04 RC Closure cap, Ø 3.5mm, H 0.5mm, Ti 31, 33




024.4234S RC Healing abutment, bottle shape, Ø 4.4mm, H 4mm, Ti 31, 33

024.4236S RC Healing abutment, bottle shape, Ø 4.7mm, H 6mm, Ti 31, 33




024.4270S RC Healing abutment, customizable, Ø 7mm, H 7mm, PEEK 31, 33

024.4322-04 RC Protective Cap, for Cementable Abutment, D 5mm, AH 4mm, PEEK 116

024.4323-04 NC/RC Protective cap for screw-retained abutment, Ø 4.6mm, H 5.1mm, PEEK/TAN 103, 124



024.4326-04 RC Protective Cap, for Cementable Abutment, D 5mm, AH 5.5mm, PEEK 116

024.4332-04 RC Protective Cap, for Cementable Abutment, D 6.5mm, AH 4mm, PEEK 116

024.4336-04 RC Protective Cap, for Cementable Abutment, D 6.5mm, AH 5.5mm, PEEK 116

024.4356 RC Temporary Coping, for Cementable Abutment, D 5mm, PMMA 116

024.4366 RC Temporary Coping, for Cementable Abutment, D 6.5mm, PMMA 116

024.4371 RC Temporary Abutment, Crown, D 4.5mm, H 11mm, TAN 114

024.4372 RC Temporary abutment, D 7mm, H 12mm, VITA CAD-Temp® 114

024.4375 RC Temporary Abutment, Bridge, D 4.5mm, H 11mm, TAN 114

025.0000 CARES® Mono Scanbody for screw-retained abutment, abutment level, Ø 3.5mm, PEEK/TAN 103

025.0001 CARES® Mono Scanbody for screw-retained abutment, abutment level, Ø 4.6mm, PEEK/TAN 103, 124

025.0002 NC/RC Screw, for screw-retained abutment 17°/30°, TAN 105, 125, 191

025.0004 Polishing Aid, for Screw-retained Abutments Ø 3.5mm, TAN 103

025.0004V4 Polishing Aid, for Screw-retained Abutments Ø 3.5mm, TAN 103

025.0005 Polishing Aid, for Screw-retained Abutments Ø 4.6mm, TAN 103, 124

025.0005V4 Polishing Aid, for Screw-retained Abutments Ø 4.6mm, TAN 103, 124

025.0006 Lab Processing Screw, for Screw-retained Abutments, stainless steel 103, 124

025.0007 Repositionable Analog, stainless steel, for Screw-retained Abutments Ø 3.5 mm 103

025.0008 Repositionable Analog, stainless steel, for Screw-retained Abutments Ø 4.6 mm 103, 124

025.0009 Transfer and Alignment Pin, for Screw-retained Abutments, TAN 104, 124

025.0011 Impression Post f. open tray f. screw-ret. abut., abut. level, Ø 3.5mm, non-engaging, TAN 103

025.0012 Impression Post f. open tray f. screw-ret. abut., abut. level, Ø 4.6mm, non-engaging, TAN 103, 124

025.0013 Impression Post f. closed tray f. screw-ret. abut., abut. level, Ø 3.5mm, non-engaging, TAN/POM 103

025.0014 Impression Post f. closed tray f. screw-ret. abut., abut. level, Ø 4.6mm, non-engaging, TAN/POM 103, 124

025.0120-04 LOCATOR® Female Implant Analog, Ø 4.0 mm 53, 110, 130

025.2101 NC Bone Level Implant Analog, L 12mm, Ti 94

025.2102 Repositionable Implant Analog NC 94

025.2112 NC Implant Analog, for Cementable Abutment, D 3.5mm, AH 4mm, TAN 96

025.2116 NC Implant Analog, for Cementable Abutment, D 3.5mm, AH 5.5mm, TAN 96

025.2122 NC Implant Analog, for Cementable Abutment, D 5mm, AH 4mm, TAN 96

025.2126 NC Implant Analog, for Cementable Abutment, D 5mm, AH 5.5mm, TAN 96

025.2201 NC Impression Post Closed Tray, with 1 guide screw & 2 caps, TAN/POM 94

025.2202 NC Impression Post Open Tray, short, with guide screw, L 16.5mm, TAN 94

025.2203-04 NC Impression Cap, for Cementable Abutment, D 3.5mm, AH 4mm, POM 96

025.2204-04 NC Impression Cap, for Cementable Abutment, D 5mm, AH 4mm, POM 96

025.2205 NC Impression post, for open tray, with guide screw, L 30mm, TAN 94

025.2208-04 NC Bite Registration Aid, H 8mm, POM 94

025.2212-04 NC Bite Registration Aid, H 12mm, POM 94

025.2220-04 NC Impression Cap, for Cementable Abutment, D 5mm, AH 5.5mm, POM 96

025.2243 Impression post for open tray, TAN, for screw-ret. abut., abut. level, 0°, D 3.5mm 103

025.2244 Impression post for open tray, TAN, for screw-ret. abut., abut. level, 0°, D 4.6mm 103, 124

025.2245 Impression post for closed tray, abutment level, for screw-retained abutment, D 3.5mm, TAN/POM 103

025.2246 Impression post for closed tray, abutment level, for screw-retained abutment, D 4.6mm, TAN/POM 103, 124


229

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



025.2601-04 NC PLAN Anatomic Abutment, straight, GH 2mm, POM 133

025.2602-04 NC PLAN Anatomic Abutment, straight, GH 3.5mm, POM 133

025.2603-04 NC PLAN Anatomic Abutment, angled 15°, GH 2mm, POM 133

025.2604-04 NC PLAN Anatomic Abutment, angled 15°, GH 3.5mm, POM 133

025.2610-04 NC PLAN Gold Abutment, for crown, POM 133

025.2611-04 NC PLAN Cementable Abutment, D 3.5mm, GH 1mm, AH 4mm, POM 133



025.2615-04 NC PLAN Cementable Abutment, D 3.5mm, GH 1mm, AH 5.5mm, POM 133



025.2621-04 NC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 4mm, POM 133



025.2625-04 NC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, POM 133



025.2642-04 NC PLAN LOCATOR® Abutment, H 2mm, POM 134





025.2648-04 NC Plan screw-retained abutment, POM, straight 0°, D 3.5mm, GH 2.5mm 134

025.2650-04 NC Plan screw-retained abutment, POM, straight 0°, D 4.6mm, GH 2.5mm 134

025.2653-04 NC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type A 134

025.2655-04 NC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type A 134

025.2658-04 NC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type B 134

025.2660-04 NC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type B 134

025.2900 NC Basal Screw, TAN 94, 95, 101, 102, 107, 108, 191

025.2903 NC Wax-up sleeve, L 15.1 mm, PEEK 100

025.2903-04 NC Wax-up sleeve, L 15.1 mm, PEEK 100

025.2905 NC Straumann® Scanbody, PEEK/TAN 94

025.2906 NC Basal screw, for ceramic abutment only, TAN 95, 101, 102, 191

025.2908 NC Basal Screw, for Cementable Abutment only, TAN 94, 97, 191

025.2911-04 NC Transfer Aid, for Cementable Abutment, D 3.5mm, PC 96

025.2912-04 NC Transfer Aid, for Cementable Abutment, D 5mm, PC 96

025.2915 CARES® NC Mono Scanbody, D 3.5 mm, H 10 mm, PEEK, TAN 94

025.2920 NC Polishing Aid, stainless steel 101

025.2920-04 NC Polishing Aid, stainless steel 101

025.2921 NC Variobase® Abutment, with screw, D 3.8mm, H 3.5mm, TAN 100, 102

025.2926 NC/RC SRBB Bone Level screw, TAN 50, 51, 101, 102, 121, 123, 191

025.4101 RC Bone Level Implant Analog, L 12mm, Ti 114

025.4102 Repositionable Implant Analog RC 114

025.4122 RC Implant Analog, for Cementable Abutment, D 6.5mm, AH 4mm, TAN 116

025.4126 RC Implant Analog, for Cementable Abutment, D 6.5mm, AH 5.5mm, TAN 116

025.4132 RC Implant Analog, for Cementable Abutment, D 5mm, AH 4mm, TAN 116

025.4136 RC Implant Analog, for Cementable Abutment, D 5mm, AH 5.5mm, TAN 116

025.4201 RC Impression Post Closed Tray, with 1 guide screw & 2 caps, TAN/POM 114

025.4202 RC Impression Post Open Tray, short, with guide screw, L 16.5mm, TAN 114

025.4203-04 RC Impression Cap, for Cementable Abutment, D 5mm, AH 4mm, POM 116

025.4204-04 RC Impression Cap, for Cementable Abutment, D 6.5mm, AH 4mm, POM 116

025.4205 RC Impression post, for open tray, with guide screw, L 30mm, TAN 114

025.4208-04 RC Bite Registration Aid, H 8mm, POM 114

025.4212-04 RC Bite Registration Aid, H 12mm, POM 114

025.4220-04 RC Impression Cap, for Cementable Abutment, D 5mm, AH 5.5mm, POM 116

025.4230-04 RC Impression Cap, for Cementable Abutment, D 6.5mm, AH 5.5mm, POM 116

025.4601-04 RC PLAN Anatomic Abutment, straight, GH 2mm, POM 134

025.4602-04 RC PLAN Anatomic Abutment, straight, GH 3.5mm, POM 134

025.4603-04 RC PLAN Anatomic Abutment, angled 15°, GH 2mm, POM 134

025.4604-04 RC PLAN Anatomic Abutment, angled 15°, GH 3.5mm, POM 134

025.4610-04 RC PLAN Gold Abutment for crown, POM 134

025.4621-04 RC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 4mm, POM 134



025.4625-04 RC PLAN Cementable Abutment, D 5mm, GH 1mm, AH 5.5mm, POM 134



230

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde




025.4630-04 RC PLAN Gold Abutment for bridge, POM 134

025.4631-04 RC PLAN Cementable Abutment, D 6.5mm, GH 1mm, AH 4mm, POM 135



025.4635-04 RC PLAN Cementable Abutment, D 6.5mm, GH 1mm, AH 5.5mm, POM 135



025.4641-04 RC PLAN LOCATOR® Abutment, H 1mm, POM 135






025.4648-04 RC Plan screw-retained abutment, POM, straight 0°, D 4.6mm, GH 2.5mm 135

025.4649-04 RC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type A 135

025.4650-04 RC Plan screw-retained abutment, POM, angled 17°, D 4.6mm, GH 2.5mm, Type B 135

025.4653-04 RC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type A 135

025.4660-04 RC Plan screw-retained abutment, POM, angled 30°, D 4.6mm, GH 2.5mm, Type B 135

025.4900 RC Basal Screw, TAN 114, 115, 121, 122, 123, 127,

128, 191

025.4902 RC Basal Screw, for Gold Abutment bridge only, TAN 122, 191

025.4903 RC Wax-up sleeve, L 18.8mm, PEEK 120

025.4903-04 RC Wax-up sleeve, L 18.8mm, PEEK 120

025.4905 RC Straumann® Scanbody, PEEK/TAN 114

025.4906 RC Basal screw, for ceramic abutment only, TAN 115, 121, 191

025.4908 RC Basal Screw, for Cementable Abutment only, TAN 114, 117, 191

025.4912-04 RC Transfer Aid, for Cementable Abutment, D 5mm, PC 116

025.4913-04 RC Transfer Aid, for Cementable Abutment, D 6.5mm, PC 116

025.4915 CARES® RC Mono Scanbody, D 4.1 mm, H 10 mm, PEEK, TAN 114

025.4920 RC Polishing Aid, stainless steel 122

025.4920-04 RC Polishing Aid, stainless steel 122

025.4921 RC Variobase® Abutment, with screw, D 4.5mm, H 3.5mm, TAN 120, 123

026.0000 CrossFit® Plan Cassette, empty, PC 133

026.0001 BLT Pilot Drill, short, Ø 2.2mm, L 33mm, stainless steel 167

026.0002 BLT Pilot Drill, long, Ø 2.2mm, L 41mm, stainless steel 167

026.0003 BLT Profile Drill, short, Ø 3.3mm, L 25mm, stainless steel 169

026.0004 BLT Profile Drill, long, Ø 3.3mm, L 33mm, stainless steel 169





026.0009 BLT Tap, Ø 3.3mm, L 25mm, stainless steel/TAN 169



026.0016 Straumann® Planning Guide 104, 124

026.0022 BL Bone Profiler 1, Ø 5.2mm, L 23mm, stainless steel 170

026.0023 BL Bone Profiler 2, Ø 6.6mm, L 23mm, stainless steel 170

026.0024 BL Bone Profiler 3, Ø 6mm, L 23mm, stainless steel 170

026.0025S NC Guiding Cylinder for BL Bone Profiler, Ø 3.25mm, L 12.5mm, TAN 170

026.0026S RC Guiding Cylinder for BL Bone Profiler, Ø 3.7mm, L 12.5mm, TAN 170

026.0901 Bone Level implant distance indicator, L 100mm, Ti/stainless steel 164

026.0902 CrossFit® Plan Set, POM 133

026.2048 48h Explantation device for BL Implant NC, L 31.4mm, stainless steel 179

026.2200 BLT Drill, short, Ø 2.8mm, L 33mm, stainless steel 168

026.2201 BLT Drill, long, Ø 2.8mm, L 41mm, stainless steel 168

026.2303 BL/NNC Implant profile drill, Ø 3.3mm, short, stainless steel 168

026.2306 BL/NNC Implant profile drill, Ø 3.3mm, long, stainless steel 168

026.2310 BL/TE/NNC Tap f. adapter, f. Ø 3.3mm implants, L 23mm, PEEK/stainless steel 169, 169

026.2503 BL/NNC Profile drill, Ø 3.3mm, guided, L 37mm, stainless steel 174

026.2510 BL/TE/NNC Tap f. handpiece, Ø 3.3mm, guided, L 42mm, stainless steel 174

026.2558 Release aid N for Loxim™ 171

026.2801 NC Guiding cylinder for Ø 3.3mm, BL Implant explantation, stainless steel 178

026.4048 48h Explantation device for BL Implant RC, L 31.2mm, stainless steel 179




231

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



026.4303 Bone Level Implant profile drill, Ø 4.1mm, short, stainless steel 168

026.4306 Bone Level Implant profile drill, Ø 4.1mm, long, stainless steel 168

026.4310 BL/TE Tap f. adapter, f. Ø 4.1mm implants, L 23mm, polymer/stainless steel 169

026.4503 BL Profile drill, Ø 4.1mm, guided, L 37mm, stainless steel 174

026.4510 BL/TE Tap f. handpiece, Ø 4.1mm, guided, L 42mm, stainless steel 174

026.4558 Release aid R/W for Loxim™ 171

026.4801 RC Guiding cylinder for Ø 4.1mm, BL Implant explantation, stainless steel 178



026.6303 Bone Level Implant profile drill, Ø 4.8mm, short, stainless steel 168

026.6306 Bone Level Implant profile drill, Ø 4.8mm, long, stainless steel 168

026.6310 BL/TE Tap f. adapter, f. Ø 4.8mm implants, L 23mm, polymer/stainless steel 169

026.6503 Bone Level profile drill, Ø 4.8mm, guided, L 37mm, stainless steel 174

026.6510 BL/TE Tap f. handpiece, Ø 4.8mm, guided, L 42mm, stainless steel 174

026.6801 RC Guiding cylinder for Ø 4.8mm, BL Implant explantation, stainless steel 178

027.4301 NC Cementable All-In-One Set, for crown, D 3.5mm, AH 4mm, GH 1mm 98



027.4307 NC Cementable All-In-One Set, for crown, D 5mm, AH 4mm, GH 1mm 99



027.4310 NC Cementable All-In-One Set, for crown, D 5mm, AH 5.5mm, GH 1mm 99



027.4313 RC Cementable All-In-One Set, for crown, D 5mm, AH 4mm, GH 1mm 118



027.4316 RC Cementable All-In-One Set, for crown, D 5mm, AH 5.5mm, GH 1mm 118



027.4319 RC Cementable All-In-One Set, for crown, D 6.5mm, AH 4mm, GH 1mm 118



027.4322 RC Cementable All-In-One Set, for crown, D 6.5mm, AH 5.5mm, GH 1mm 119



031.001S Straumann® PURE Ceramic Implant (Monotype), Ø 3.3mm ND, ZLA™ 8mm, AH 4mm, ZrO2 36




031.011S Straumann® PURE Ceramic Implant (Monotype), Ø 3.3mm ND, ZLA™ 8mm, AH 5.5mm, ZrO2 36




031.021S Straumann® PURE Ceramic Implant (Monotype), Ø 4.1mm RD, ZLA™ 8mm, AH 4mm, ZrO2 38




031.031S Straumann® PURE Ceramic Implant (Monotype), Ø 4.1mm RD, ZLA™ 8mm, AH 5.5mm, ZrO2 38




031.080 48h Explantation Device, L 19.7mm, stainless steel, for RD Straumann® PURE Ceramic Implant (Monotype) 179

031.081 48h Explantation Device, L 19.8mm, stainless steel, for ND Straumann® PURE Ceramic Implant (Monotype) 179

031.102 ND Position Indicator, Ø 2.2mm, AH 4mm, L 8mm, Ti 37

031.103 ND Position Indicator, Ø 2.8mm, AH 4mm, L 8mm, Ti 37

031.112 ND Position Indicator, Ø 2.2mm, AH 5.5mm, L 8mm, Ti 37

031.113 ND Position Indicator, Ø 2.8mm, AH 5.5mm, L 8mm, Ti 37

031.123 RD Position Indicator, Ø 2.2mm, AH 4mm, L 8mm, Ti 39

031.125 RD Position Indicator, Ø 3.5mm, AH 4mm, L 8mm, Ti 39

031.143 RD Position Indicator, Ø 2.2mm, AH 5.5mm, L 8mm, Ti 39

031.145 RD Position Indicator, Ø 3.5mm, AH 5.5mm, L 8mm, Ti 39

031.200 ND Implant Analog, AH 4mm, TAN 37

031.201 ND Implant Analog, AH 5.5mm, TAN 37

031.210 RD Implant Analog, AH 4mm, TAN 39

031.211 RD Implant Analog, AH 5.5mm, TAN 39


232

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



031.250 ND Impression Cap, AH 4mm, POM 37

031.251 ND Impression Cap, AH 5.5mm, POM 37

031.260 RD Impression Cap, AH 4mm, POM 39

031.261 RD Impression Cap, AH 5.5mm, POM 39

031.300 ND Temporary Coping, for crown, PMMA 37

031.301 ND Temporary Coping, for bridge, PMMA 37

031.310 RD Temporary Coping, for crown, PMMA 39

031.311 RD Temporary Coping, for bridge, PMMA 39

031.320 ND Protective Cap, AH 4mm, PEEK 37

031.321 ND Protective Cap, AH 5.5mm, PEEK 37

031.330 RD Protective Cap, AH 4mm, PEEK 39

031.331 RD Protective Cap, AH 5.5mm, PEEK 39

033.043S Standard Plus Implant, Ø 4.1mm RN, SLActive® 4mm, Roxolid®, Loxim™ 21


033.045S Standard Plus Implant, Ø 4.8mm WN, SLActive® 4mm, Roxolid®, Loxim™ 24

033.416S Standard Plus Implant, Ø 3.3mm NNC, SLActive® 8mm, Roxolid® 18




033.431G Standard Implant Ø 3.3mm RN, SLActive® 8mm, Roxolid® guided 18



033.451G Standard Plus Implant Ø 3.3mm RN, SLActive® 8mm, Roxolid® guided 18



033.501S Standard Implant, Ø 3.3mm RN, SLActive® 8mm, Roxolid®, Loxim™ 18









033.521S Tapered Effect Implant, Ø 3.3mm RN, SLActive® 8mm, Roxolid®, Loxim™ 18





033.531G Standard Implant, Ø 4.1 RN, SLActive® 8mm, Roxolid®, guided 21









033.561G Standard Plus Implant, Ø 4.1 RN, SLActive® 8mm, Roxolid®, guided 21







033.571G Tapered Effect Implant, Ø 4.1 RN, SLActive® 8mm, Roxolid®, guided 21












233

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x












033.600S Standard Implant, Ø 4.8mm WN, SLActive® 6mm, Roxolid®, Loxim™ 24








033.622S Tapered Effect Implant, Ø 4.8mm WN, SLActive® 10mm, Roxolid®, Loxim™ 24



034.001 Surgical cassette, for guided surgery 176

034.005 Connector for ratchet, L 14mm, stainless steel 175

034.006 Stop key for guided implants, S/SP/TE/BL, stainless steel 175

034.010 Mucosa punch Ø 3.4mm, guided, L 30mm, stainless steel 173



034.053V4 T-sleeve, Ø 5mm, H 5mm, guided, stainless steel 173

034.055V4 T-sleeve, Ø 2.8mm, H 6mm, guided, stainless steel 173

034.123 Pilot drill, Ø 2.2mm, short, 16mm, guided, L 32mm, stainless steel 173

034.126 Pilot drill, Ø 2.2mm, long, 20mm, guided, L 36mm, stainless steel 173

034.129 Pilot drill, Ø 2.2mm, x-long, 24mm, guided, L 40mm, stainless steel 173

034.150 Drill handle, Ø 2.2mm, 1mm/3mm stop, L 104mm, stainless steel 175

034.215 Milling cutter, Ø 2.8mm, guided, L 32.5mm, stainless steel 173

034.223 Twist drill PRO, Ø 2.8mm, short, 16mm, guided, L 32mm, stainless steel 173

034.226 Twist drill PRO, Ø 2.8mm, long, 20mm, guided, L 36mm, stainless steel 173

034.229 Twist drill PRO, Ø 2.8mm, x-long, 24mm, guided, L 40mm, stainless steel 173

034.235 SP Profile drill, Ø 3.3mm, RN, guided, L 35mm, stainless steel 174

034.237 TE Profile drill, Ø 3.3mm, RN, guided, L 37mm, stainless steel 174

034.245 S/SP Tap f. handpiece, Ø 3.3mm, guided, L 42mm, stainless steel 174


034.255 Template fixation pin, Ø 5.0mm/2.8mm, guided, L 24mm, stainless steel 175


034.257 BLT Pilot Drill, guided, Ø 2.2mm, short, stainless steel 173

034.258 BLT Pilot Drill, guided, Ø 2.2mm, medium, stainless steel 173

034.259 BLT Pilot Drill, guided, Ø 2.2mm, long, stainless steel 173

034.260 BLT Drill, guided, Ø 2.8mm, short, stainless steel 174

034.261 BLT Drill, guided, Ø 2.8mm, medium, stainless steel 174

034.262 BLT Drill, guided, Ø 2.8mm, long, stainless steel 174







034.269 BLT Profile Drill, guided, Ø 3.3mm, L 36mm, stainless steel 174



034.272 BLT Tap, guided, Ø 3.3mm, L 42mm, stainless steel 174



034.281 Straumann® Basic Surgical Cassette, guided 176




034.429 Twist drill PRO, Ø 3.5mm,x-long, 24mm, guided, L 40mm, stainless steel 173

034.435 SP Profile drill, Ø 4.1mm, RN, guided, L 35mm, stainless steel 174


234

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



034.437 TE Profile drill, Ø 4.1mm, RN, guided, L 37mm, stainless steel 174







034.629 Twist drill PRO, Ø 4.2mm,x-long, 24mm, guided, L 40mm, stainless steel 173



034.655 Template fixation pin, Ø 5mm/4.2mm, guided, L 24mm, stainless steel 175

034.750 C-handle H2, 6mm stop height, L 89mm, stainless steel 175



040.165 Straumann® surgical cassette 171

040.175 Ultrasonic Cleaning Cassette, 150 x 65 x 25 mm, plastic/silicone 183

040.185 Prosthetic cassette for instruments, complete, 224 x 115 x 20 mm, anodized aluminium 188

040.195 Bar set, gold, 2x048.601, 2x048.124, 2x048.204, 4x048.350 68

040.196 Bar set, titanium, 2x048.601, 2x048.124, 2x048.214, 2x048.350 69

040.197 Bar set, plastic, 2x048.601, 2x048.124, 2x048.227, 2x048.350 70

040.360 Screwdriver handle 1.5 with blade and, screw-holding dev. for crosshead screws 154, 180

040.400S Drill set, short, drill stop incompatible for D 3.3mm implant, D 2.2, 2.8mm, length 33mm, stainless steel 165

040.401S Drill set, long, drill stop incompatible for D 3.3mm implant, D 2.2, 2.8mm, length 41mm, stainless steel 165

040.403S Drill set, short, drill stop incompatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 33mm, stainless steel 165

040.404S Drill set, long, drill stop incompatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 41mm, stainless steel 165

040.406S Drill set, short, drill stop incompatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 33mm, stainless steel 165

040.407S Drill set, long, drill stop incompatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 41mm, stainless steel 165

040.440S Drill set, short, drill stop compatible for D 3.3mm implant, D 2.2, 2.8mm, length 33mm, stainless steel 165

040.441S Drill set, long, drill stop compatible for D 3.3mm implant, D 2.2, 2.8mm, length 41mm, stainless steel 165

040.443S Drill set, short, drill stop compatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 33mm, stainless steel 165

040.444S Drill set, long, drill stop compatible for D 4.1mm implant, D 2.2, 2.8, 3.5mm, length 41mm, stainless steel 165

040.446S Drill set, short, drill stop compatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 33mm, stainless steel 165

040.447S Drill set, long, drill stop compatible for D 4.8mm implant, D 2.2, 2.8, 3.5, 4.2mm, length 41mm, stainless steel 165

040.454S Refill Package, f. Drill Stop Set, type A, f.drill short 12 mm/long 16 mm, for Ø 3.3 – 4.8 implants, contents 040.450S 166

040.455S Refill Package, f. Drill Stop Set, type B, f.drill short 10 mm/long 14 mm, for Ø 3.3 – 4.8 implants, contents 040.451S 166

040.456S Refill Package, f. Drill Stop Set, type C, f.drill short 8 mm/long 12 mm, for Ø 3.3 – 4.8 implants, contents 040.452S 166

040.457S Refill Package, f. Drill Stop Set, type D, f.drill short 6 mm/long 10 mm, for Ø 3.3 – 4.8 implants, contents 040.453S 166

040.460 Drill Stop Kit, incl. single-patient drill stop sets, type A, B, C, D, incl. non-sterile Drill Stop Aid 166

040.461 Drill stop aid, polymer 166

040.500 Osteotome instrument kit, for bone condensation, stainless steel 181

040.501 Osteotome instrument kit, for sinus floor elevation, stainless steel 182

040.550 Cassette without content, for bone condensation 181

040.560 Cassette without content, for sinus floor elevation 182

040.564 Straumann® Basic Surgical Cassette 171

040.740 RN Solid All-In-One Set, yellow, H 4mm, for crown 66

040.741 RN Solid All-In-One Set, gray, H 5.5mm, for crown 66

040.742 RN Solid All-In-One Set, blue, H 7mm, for crown 66

040.745 WN Solid All-In-One Set, green, H 4mm, for crown 86

040.746 WN Solid All-In-One Set, brown, H 5.5mm, for crown 86

040.840 RN Solid All-In-One Set, yellow, H 4mm, for bridge 66

040.841 RN Solid All-In-One Set, gray, H 5.5mm, for bridge 66

040.842 RN Solid All-In-One Set, blue, H 7mm, for bridge 66

040.845 WN Solid All-In-One Set, green, H 4mm, for bridge 86

040.846 WN Solid All-In-One Set, brown, H 5.5mm, for bridge 86

040.919C Classic Set, type F, K and H 139

040.920C Classic Set, type TPS Screwed implant 139

040.921C Classic Set, type 8° 139

040.922C Classic Set, type Octa 139, 139

041.022 Prosthetic cassette for instruments, 224 x 115 x 20 mm, anodized aluminium 188

041.032 Bone Block Fixation cassette for sterilization and storage of drills,mini-screws, screwdriver, 130mmx118mmx25mm 154, 180

041.211 Tray for cassette 041.022, 218x109x16 mm, Al 188

041.412 Calibration cup, yellow, Ø 80mm, anodized aluminium 188

041.440 Dish for tray 041.211, 56x31x11 mm, Al 188

041.500 Storage System for implants (SLA & SLActive), 280 x 226 x 248 mm, plastic 183

041.501 Storage System for Prosthetics, 280 x 226 x 248mm, plastic 187

041.520 Drawer for storage system, high, 282 x 220 x 47 mm, plastic 183, 187


235

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



041.521 Drawer for storage system, low, 282 x 220 x 32mm, plastic 187

041.522 Drawer for storage system, organisation, 282 x 220 x 32mm, plastic 187

041.530V5 Divider set, flat, for implants, 190 x 45 mm, plastic 183

041.531 Divider, prostethics, 249 x 30mm, plastic 187

041.612 Divider, large, for tray 041.211, 47.5 x 9.5 x 1mm, anodized aluminium 188

041.615 Divider, small, for dish 041.440, 27.5 x 9.5 x 1mm, anodized aluminium 188

042.700V5 Crosshead mini-screws, Ø 1.5mm, L 8.0mm 154, 180




043.061S Standard Implant, Ø 4.8mm RN, SLA® 6mm, Roxolid®, Loxim™ 25





043.066S Standard Plus Implant, Ø 4.8mm RN, SLA® 6mm, Roxolid®, Loxim™ 25





043.155S Standard Implant, Ø 4.1mm RN, SLA® 6mm, Roxolid® Loxim™ 22











043.166S Tapered Effect Implant, Ø 4.1mm RN, SLA® 8mm, Roxolid®, Loxim™ 22















043.266S Tapered Effect Implant, Ø 3.3mm RN, SLA® 12mm, Roxolid®,Loxim™ 19


043.416S Standard Plus Implant, Ø 3.3mm NNC, SLA® 8mm, Roxolid®, Loxim™ 19




043.606S Standard Implant, Ø 4.8mm WN, SLA® 6mm, Roxolid®, Loxim™ 25




043.655S Standard Plus Implant, Ø 4.8mm WN, SLA® 6mm, Roxolid®, Loxim™ 25




043.660S Tapered Effect Implant, Ø 4.8mm WN, SLA® 10mm, Roxolid®, Loxim™ 25



044.003 Round bur, Ø 2.3mm, stainless steel 167




236

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



044.084 SP Profile drill, WN, short, Ø 4.2mm, L 25mm, stainless steel 168

044.085 SP Profile drill, WN, long, Ø 4.2mm, L 34mm, stainless steel 168

044.086 SP Profile drill, RN, short, Ø 2.8mm, L 25mm, stainless steel 168

044.087 SP Profile drill, RN, long, Ø 2.8mm, L 34mm, stainless steel 168

044.088 SP Profile drill, RN, short, Ø 3.5mm, L 25mm, stainless steel 168

044.089 SP Profile drill, RN, long, Ø 3.5mm, L 34mm, stainless steel 168

044.125 Glide Hole Drill, Ø 1.5mm, stop = 20mm, L 37.0mm 154, 180

044.126 Residual Ridge Drill, Ø 1.25mm, stop = 16mm, L 37.0mm 154, 180

044.210 Pilot drill 1, short, Ø 2.2mm, L 33mm, stainless steel 167

044.211 Pilot drill 1, long, Ø 2.2mm, L 41mm, stainless steel 167

044.214 Pilot drill 2, short, Ø 2.8mm, L 33mm, stainless steel 167

044.215 Pilot drill 2, long, Ø 2.8mm, L 41mm, stainless steel 167

044.250 Twist drill PRO, short, Ø 3.5mm, L 33mm, stainless steel 167

044.251 Twist drill PRO, long, Ø 3.5mm, L 41mm, stainless steel 167

044.254 Twist drill PRO, short, Ø 4.2mm, L 33mm, stainless steel 167

044.255 Twist drill PRO, long, Ø 4.2mm, L 41mm, stainless steel 167

044.304 Bone profiler for RN, L 28mm, stainless steel, needed guiding cylinder: 049.082 170

044.305 Bone profiler for WN, L 25mm, stainless steel, needed guiding cylinder: 049.082 170

044.330 Explantation drill, short, for Ø 3.3mm, Ø 3.5mm, L 32mm, stainless steel 177

044.331 Explantation drill, medium, for Ø 3.3mm, Ø 3.5mm, L 37.5mm, stainless steel 177

044.332 Explantation drill, long, for Ø 3.3mm, Ø 3.5mm, L 40.5mm, stainless steel 177

044.340 Explantation drill, short, for Ø 4.1mm, L 32mm, stainless steel 177

044.341 Explantation drill, medium, for Ø 4.1mm, L 37.5mm, stainless steel 177

044.342 Explantation drill, long, for Ø 4.1mm, L 40.5mm, stainless steel 177

044.344 Explantation drill, short, for Ø 4.8mm, L 32mm, stainless steel 177

044.345 Explantation drill, medium, for Ø 4.8mm, L 37.5mm, stainless steel 177

044.346 Explantation drill, long, for Ø 4.8mm, L 40.5mm, stainless steel 177

044.570 Tap for transversal screw retention, M2 x 0.25mm, stainless steel 186

044.575 S/SP Tap for adapter, Ø 3.3mm, L 23mm, PEEK/stainless steel 169



044.701 TE Profile drill, RN, short, Ø 2.8mm, L 28mm, stainless steel 168

044.703 TE Profile drill, WN, short, Ø 4.2mm, L 28mm, stainless steel 168

044.705 TE Profile drill, RN, short, Ø 3.5mm, L 28mm, stainless steel 168

044.708 TE Profile drill, RN, long, Ø 2.8mm, L 37mm, stainless steel 168

044.710 TE Profile drill, WN, long, Ø 4.2mm, L 37mm, stainless steel 168

044.712 TE Profile drill, RN, long, Ø 3.5mm, L 37mm, stainless steel 168

045.111V4 Cleaning brush for ratchet, L 100mm, Ø 4.5mm, nylon/stainless steel 171, 184

045.921 Light curette (pack of 5 pcs) 172

046.045C Driver for Octa abutment 142, 186

046.049 Torque control device for ratchet, stainless steel 171, 184

046.057 Tweezers without titanium plasma-coated tips, L 105mm, stainless steel 171

046.064 Holding key, L 85mm, stainless steel 171

046.067 Solid abut.driver, short, f. RN solid abut.6°, L 13mm, stainless steel 67, 184

046.068 Solid abut.driver, long, f. RN solid abut.6°, L 19mm, stainless steel 67, 184

046.069 Retentive anchor driver, L 19mm, stainless steel 72, 184

046.085 Screwdriver handle for 046.410/411/412, L 109mm, stainless steel 184

046.095 Tweezers with titanium plasma-coated tips, L 105mm, Ti/stainless steel 171

046.108 Service instrument for ratchet, L 50mm, stainless steel 171, 184

046.110 Instrument tweezers, L 140mm, stainless steel 171

046.114C Cross-tip screwdriver 142, 186

046.119 Ratchet, including service instrument, L 84mm, stainless steel 171, 184

046.147 Diagnostic T, L 65mm, W 33mm, Ti 164

046.148 Implant distance indicator, L 100mm, Ti/stainless steel 164

046.150 Activator set, for all bar matrices, three-part, stainless steel 71, 109, 129, 186

046.151 Deactivator for Dolder® Bar matrices, mini, L 66mm, Grilon BS/brass 71, 109, 129, 186

046.152 Deactivator for Dolder® Bar matrices, regular, L 66mm, Grilon BS/brass 71, 109, 129, 186

046.154 Screwdriver, L 37mm, stainless steel 72, 184

046.237 NNC Reamer for 45° shoulder, L 17mm, stainless steel / Ti-N 185

046.239 Analog holder, length 205.0 mm, steel, anodized aluminium 186

046.240 Handle for reamers and Tap for TS, L 65mm, steel/brass 185

046.241 Guide pin for reamer, for synOcta®, L 50mm, stainless steel 185

046.242 Guide pin for reamer, for 048.540-542, L 50mm, stainless steel 185

046.243 Reamer for 45° shoulder, Ø 8.0mm, Ti-N/stainless steel 185

046.244 Guide pin for reamer, for 048.545-546, L 50mm, stainless steel 185

046.245 Polishing protector for RN synOcta® Coping, L 15 mm, stainless steel 64, 71


237

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



046.246 Guide pin for reamer, for 048.605, L 50mm, stainless steel 185

046.247 Guide pin for reamer, for 048.606, L 50mm, stainless steel 185

046.249 NNC Guide pin for reamer 046.237, for Solid abutments, L 52.9mm, stainl. steel 185

046.256 Screwdriver blade 1.5 for screw-holding device 1.5 154, 180

046.257 Screw-holding device 1.5 154, 180

046.258 Screwdriver handle 1.5 154, 180

046.400 SCS Screwdriver, for ratchet, x-short, L 15mm, stainless steel 86, 172, 184

046.401 SCS Screwdriver, for ratchet, short, L 21mm, stainless steel 86, 172, 184

046.402 SCS Screwdriver, for ratchet, long, L 27mm, stainless steel 86, 172, 184

046.410 SCS Screwdriver for handpiece, x-short, L 20mm, stainless steel 172, 184

046.411 SCS Screwdriver for handpiece, short, L 26mm, stainless steel 172, 184

046.412 SCS Screwdriver for handpiece, long, L 32mm, stainless steel 172, 184

046.413V4 LOCATOR® abutment holder sleeve 55, 75, 89, 112, 132

046.415 Locator® core tool, stainless steel with Au 55, 75, 89, 112, 132, 184

046.416 Locator® screwdriver for ratchet, short, length 15.0 mm, stainless steel 55, 75, 89, 112, 132, 184

046.417 LOCATOR® screwdriver for ratchet, length 21.0 mm 55, 75, 89, 112, 132, 184

046.421 Hexagonal screwdriver, L 30mm, stainless steel 172

046.460 Adapter for ratchet, x-short, L 11mm, stainless steel 171

046.461 Adapter for ratchet, short, L 18mm, stainless steel 171

046.462 Adapter for ratchet, long, L 28mm, stainless steel 171

046.470 Adapter for handpiece, x-short, L 19mm, stainless steel 171

046.471 Adapter for handpiece, short, L 26mm, stainless steel 172

046.472 Adapter for handpiece, long, L 34mm, stainless steel 172

046.500 Osteotome straight, for bone condensation, Ø 2.2mm, stainless steel 181




046.510 Osteotome angled, for bone condensation, Ø 2.2mm, stainless steel 181




046.521 Osteotome straight, for sinus floor elevation, Ø 2.8mm, stainless steel 182



046.531 Osteotome angled, for sinus floor elevation, Ø 2.8mm, stainless steel 182



046.550 Depth stop for osteotomes, Ø 2.2mm, Ti/stainless steel 181

046.551 Depth stop for osteotomes, Ø 2.8mm, Ti/stainless steel 181, 182



046.703 Alignment Pin, Ø 2.2mm, L 27mm, Ti 170

046.704 Depth Gauge, with distance indicator, Ø 2.2/2.8mm, L 27mm, Ti 170

046.705 Depth Gauge, Ø 2.8mm, L 27mm, Ti 170

046.706 Depth Gauge, Ø 3.5mm, L 27mm, Ti 170

046.707 Depth Gauge, Ø 4.2 mm, L 27mm, Ti 170

048.000V4 Transfer aid for RN synOcta®, angled, short, H 5.5 mm, PC 60

048.002V4 Transfer aid for RN synOcta®, angled, long, H 4 mm, PC 60

048.010 RN synOcta® impression cap, screw-retained, with integral guide screw, H 10.1mm, Al/Ti 58

048.013 WN Impression Cap, H 8mm, POM 78, 85

048.016 NN Impression cap with integral guide screw, L 17,5 mm, Al/TAN 140

048.017V4 RN Impression Cap, H 8mm, POM 58, 65

048.028S RN Healing cap, labial bevel, Ø 5.5mm, H 2mm, Ti 20, 23, 26

048.029S RN Healing cap, labial bevel, Ø 5.5mm, H 3.5mm, Ti 20, 23, 26

048.030S WN Healing cap, labial bevel, Ø 7.2mm, H 2mm, Ti 26

048.032 Transfer aid for WN synOcta®, angled, H 5 mm, PC 80

048.033S RN Healing cap, Ø 5.5mm, H 2mm, Ti 20, 23, 26

048.034S RN Healing cap, Ø 5.5mm, H 3mm, Ti 20, 23, 26

048.037S RN Healing cap, Ø 5.5mm, H 4.5mm, Ti 20, 23, 26

048.038S WN Healing cap, Ø 7.2mm, H 2mm, Ti 26

048.039S WN Healing cap, Ø 7.2mm, H 3mm, Ti 26

048.047V4 RN Protective Cap for Solid Abutment 048.540, H 5.8mm, PEEK 65



048.050 NN Protective cap with integr.occlusal screw, D 4mm, H 3.4mm, PEEK/TAN 140

048.051 WN Protective Cap for Solid Abutment 048.545, H 6mm, PEEK 85


238

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



048.052 WN Protective Cap for Solid Abutment 048.546, H 7.5mm, PEEK 85

048.053S WN Healing cap, Ø 7.2mm, H 4.5mm, Ti 26

048.054V4 Transfer aid for 048.606, H 6,5 mm, PC 79

048.059V4 Transfer aid for 048.605, H 6,5 mm, PC 59

048.060V4 RN Positioning Cylinder for Solid Abutment, for 048.540, H 10.2mm, POM 65



048.065 WN Positioning Cylinder for Solid Abutment, for 048.545, H 10mm, POM 85

048.066 WN Positioning Cylinder for Solid Abutment, for 048.546, H 10mm, POM 85

048.068 RN Straumann® Scanbody, PEEK/ Ti 58

048.069 WN Straumann® Scanbody, PEEK/ Ti 78

048.070V4 RN synOcta® Positioning Cylinder, H 12mm, POM 58

048.071S NNC Healing cap, Ø 4mm, H 3mm, Ti 20

048.073V4 Fixation pin, for bar constructions, with synOcta® 1.5, gray, L 5mm, POM 71

048.074S NNC Healing cap, Ø 4mm, H 4.5mm, Ti 20

048.082S NNC Healing cap, labial bevel, Ø 4mm, H 2mm, Ti 20

048.088 RN Wax-up sleeve, L 16.3 mm, PEEK 61

048.088-04 RN Wax-up Hülse, L 16.3 mm, PEEK 61

048.089 WN Wax-up sleeve, L 16.4 mm, PEEK 80

048.089-04 WN Wax-up Hülse, L 16.4 mm, PEEK 80

048.090 RN synOcta® Impression post, with integral guide screw, H 21.0 mm, Al/Ti 58

048.091 WN synOcta® impression cap, screw-retained, with integral guide screw, H 10mm, Al 78

048.093V4 RN synOcta® Impression Cap, one-part, for bar with synOcta® 1.5, H 5mm, POM 71

048.095 WN synOcta® Positioning Cylinder, H 12mm, POM 78

048.108 Analog for RN Bar constructions, w. synOcta® 1.5, L 11.5mm, stainless steel 71

048.109 Transfer pin for retentive anchor, L 18mm, stainless steel 42, 72

048.117V4 Analog for individualized RN Solid Abutments, 2 pieces, PPS/brass 65

048.124 Analog for RN synOcta®, L 12mm, grey w. red stripe, stainless steel 58

048.127 NNC Implant analog, L 12.5mm, Ti 48

048.128 NNC Impression post, for open tray, H 10.1mm, TAN 48

048.129 Repositionable Implant Analog RN 58

048.130 NN Analog, L 14mm, stainless steel 140

048.134 NNC Impression post, closed tray, H 10.9mm, TAN/POM 48

048.137 NNC Wax-up sleeve, L 12.75 mm, PEEK 50

048.137V4 NNC Wax-up sleeve, L 12.75 mm, PEEK 50

048.140 Shoulder Analog for WN Solid Abutment, L 10mm, Al 85

048.155 NNC Solid abutment driver, short, L 13mm, stainless steel 52, 184

048.156 NNC Solid abutment driver, long, L 19mm, stainless steel 52, 184

048.160 RN Analog for Solid Abutment 048.540, L 14.3mm, yellow, Al 65

048.161 RN Analog for Solid Abutment 048.541, L 15.8mm, grey, Al 65

048.162 RN Analog for Solid Abutment 048.542, L 17.3mm, blue, Al 65

048.165 WN Analog for Solid Abutment 048.545, L 16mm, green, Al 85

048.166 WN Analog for Solid Abutment 048.546, L 17.5mm, brown, Al 85

048.168 CARES® RN Mono Scanbody, D 4.8 mm, H 10 mm, PEEK, TAN 58

048.169 CARES® WN Mono Scanbody, D 6.5 mm, H 10 mm, PEEK, TAN 78

048.171 WN synOcta® Analog, L 12mm, stainless steel 78

048.172 Repositionable Implant Analog WN 78

048.173 CARES® NNC Mono Scanbody, D 3.5 mm, H 10 mm, PEEK, TAN 48

048.175 RN Locator® abutment, height 1.0 mm, titanium alloy, TiN coating 73






048.181V4 LOCATOR® zero retention ext range, gray 54, 74, 88, 111, 131

048.182V2 LOCATOR® Male processing package, extended range, titanium/nylon 54, 74, 88, 111, 131

048.183 WN Locator®, solid abutment, tissue cuff height 1.0 mm, titanium alloy,TiN coating 87

048.184 WN Locator®, solid abutment, tissue cuff, height 2.0mm, titanium alloy,TiN coating 87

048.185 WN Locator®, solid abutment, tissue cuff height 3.0 mm, titanium alloy,TiN coating 87

048.186 WN Locator®, abutment, tissue cuff height 4.0 mm, titanium alloy, TiNcoating 87

048.187 WN Locator®, abutment, tissue cuff height 5.0 mm, titanium alloy, TiNcoating 87

048.188V4 LOCATOR® Replacement male, extended range, orange, height 1.7 mm, nylon 54, 74, 88, 111, 131

048.189V2 Locator® male processing package, titanium/nylon 54, 74, 88, 111, 131

048.190V4 LOCATOR® replacement male, clear, 0°–10°, 5 lbs, 2.27 kg,H 1.7mm, nylon 54, 74, 88, 111, 131

048.191V4 Locator® replacement male, light retention, pink, height 1.7 mm, nylon 54, 74, 88, 111, 131

048.192V4 Locator® replacement male, extra light retention, blue, height 1.7 mm,nylon 54, 74, 88, 111, 131


239

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



048.193V4 Locator® replacement male, extended range, green, height 1.7 mm, nylon 54, 74, 88, 111, 131

048.194V4 Locator® replacement male, extra light retention, ext. range, red,height 1.7 mm, nylon 54, 74, 88, 111, 131

048.195V4 LOCATOR® black processing male 55, 75, 89, 112, 132

048.196V20 Locator® block-out spacer, silicon 55, 75, 89, 112, 132

048.197V4 Locator® impression coping, aluminium housing with black male LDPE 53, 73, 87, 110, 130

048.198V4 Locator® female analog, ø 5.0 mm, aluminium 73, 87

048.199V4 Locator® parallel post, LDPE 55, 75, 89, 112, 132

048.200 Locator® angle measurement guide, stainless steal 55, 75, 89, 112, 132

048.204 RN synOcta® gold coping, bar, for synOcta 1.5, H 5.8mm, Ceramicor® 68

048.208V4 Stabilization pin, f.RN synOcta® gold copings, L 11mm, stainless steel 71

048.214 RN synOcta® Ti Coping, Bar for synOcta® 1.5, H 6mm, Ti 69

048.218V4 LOCATOR® processing spacer 55, 75, 89, 112, 132

048.220C Plastic coping for abutment 8º 141

048.227 RN synOcta® Plastic Coping for synOcta® 1.5, for bridge/bar, H 10mm, POM 64, 70

048.229 RN synOcta® Plastic Coping for synOcta® 1.5, for crown, H 10mm, POM 64

048.232C TS Gold coping for Octa 141

048.240 RN synOcta® Milling Cylinder, Crown, for synOcta® 1.5, D 6mm, H 8mm, Ti 64

048.241 RN synOcta® Milling Cylinder, Bridge, for synOcta® 1.5, D 6mm, H 8mm, Ti 64

048.242 WN Temporary abutment, D 10mm, H 10mm, VITA CAD-Temp® 79

048.243 WN synOcta® Plastic Coping for 048.606, for crown, H 7.35mm, POM 79

048.244 WN synOcta® Plastic Coping for 048.606, for bridge, H 7.35mm, POM 79

048.245 RN Plastic coping for Solid Abutment, crown, H 10mm, POM 66

048.246 RN Plastic coping for Solid Abutment, bridge, H 10mm, POM 66

048.247 WN Plastic coping for Solid Abutment, crown, H 7mm, POM 86

048.248 WN Plastic coping for Solid Abutment, bridge, H 7mm, POM 86

048.256 NNC Plastic coping, for 048.598, for crown, H 7mm, POM 49

048.257 NNC Plastic coping, for 048.598, for bridge, H 7mm, POM 49

048.258 NNC Plastic coping, for 048.621/ 048.622, for crowns & bridges, H 7.2mm, POM 49

048.263 NNC Plastic coping for Solid abutment, for crown, H 10.2mm, POM 52

048.264 NNC Plastic coping for Solid abutment, for bridge, H 10.2mm, POM 52

048.267 NNC Burn-out coping, for Variobase™ Abutment, POM 51

048.267V4 NNC Burn-out coping, for Variobase™ Abutment, POM 51

048.268 RN Burn-out coping, for Variobase™ Abutment, POM 63

048.268V4 RN Burn-out coping, for Variobase™ Abutment, POM 63

048.269 WN Burn-out coping, for Variobase™ Abutment, POM 83

048.269V4 WN Burn-out coping, for Variobase™ Abutment, POM 83

048.275V4 RN PLAN LOCATOR® Abutment, H 1mm, POM 91






048.283V4 WN PLAN LOCATOR® Abutment, H 1mm, POM 92





048.304C Occlusal screw, L 15 mm 141

048.312C TPS Occlusal screw, L 8 mm 141

048.313 NNC Basal screw, L 7.1mm, TAN 48, 50, 51, 190

048.314 NNC Basal Screw, for cementable abutments, L 7.1mm, TAN 48, 49, 190

048.324S NNC Closure cap, Ø 2.6mm, H 0mm, Ti 20

048.324SV4 NNC Closure cap, Ø 2.6mm, H 0mm, Ti 20

048.325S NNC Closure cap, Ø 4mm, H 1.5mm, Ti 20

048.325SV4 NNC Closure cap, Ø 4mm, H 1.5mm, Ti 20

048.350 SCS Occlusal screw, L 4.4mm, Ti 60, 64, 68, 69, 70, 84, 178, 181,

182, 190

048.350V4 SCS Occlusal screw, L 4.4mm, Ti 60, 64, 68, 69, 70, 84, 181, 182,

190

048.354 RN Occlusal screw, for ceramic only, L 5 mm, TAN 62, 190

048.354V4 RN Occlusal screw, for ceramic only, L 5 mm, TAN 62, 190

048.356 synOcta® Basal screw, L 6,7 mm, TAN 59, 62,+C25 63, 79, 81, 82, 83,

190

048.360V4 SCS Guide screw for RN synOcta® Bar coping, cannot be shortened, L 6 mm, Ti 190

048.361V4 SCS Guide screw for RN synOcta® Bar coping, can be shortened by 1.6 mm, L 6 mm, Ti 190

048.362V4 SCS Guide screw for 048.240/241, cannot be shortened, L 8 mm, Ti 64, 190


240

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



048.363V4 SCS Guide screw for 048.240/241, can be shortened by 2 mm, L 8 mm, Ti 64, 190

048.364V4 SCS Guide screw, can be shortened by 2 mm, L 10 mm, Ti 190



048.371S RN Closure cap, Ø 3.5mm, H 0mm, Ti 20, 23, 26

048.371SV4 RN Closure cap, Ø 3.5mm, H 0mm, Ti 20, 23, 26

048.373S RN Closure cap, Ø 6mm, H 1.5mm, Ti 20, 23, 26

048.373SV4 RN Closure cap, Ø 6mm, H 1.5mm, Ti 20, 23, 26

048.375S WN Closure cap, Ø 4.3mm, H 0mm, Ti 26

048.404C Octa Abutment, H 1.5 mm 141

048.411 Dolder® bar, egg-shaped cross-section, mini, H 2.3 mm, L 25 mm, Elitor® 68, 107, 127

048.412 Dolder® bar, egg-shaped cross-section, regular, H 3 mm, L 25 mm, Elitor® 68, 107, 127

048.413 Dolder® bar matrix includes spacer, mini, H 2.75 mm, L 25 mm, Elitor®/brass 68, 107, 127

048.414 Dolder® bar matrix includes spacer, regular, H 3.5mm, L 25mm, Elitor®/brass 68, 107, 127

048.424C Pin abutment 141

048.439 Retentive anchor, H 3.4mm, Ti 72

048.448C TS Superstructure for Octa 141

048.450 Titanium matrix for retentive anchor, H 3.1mm, Ti 72

048.451V4 Dummy for titanium matrix, H 3.5mm, POM 72

048.452 Screwdriver for titanium matrix, L 50mm, stainless steel 72, 184

048.453 Extractor for titanium matrix, L 100mm, stainless steel 72

048.454V4 Threaded sleeve for mounting part for 048.450, H 2.2mm, POM 72

048.455V4 Spring for titanium matrix, stainless steel 72

048.456 Elliptical matrix, D 3.6mm, H 3.2mm, Elitor®/Ti 72

048.457 Spare lamella retention insert, H 2.6mm, Elitor® 72

048.460 Plastic bar, egg-shaped cross-section, regular, H 3mm, L 80mm, PMMA 70, 109, 129

048.461 Plastic bar, egg-shaped cross-section, mini, H 2.3mm, L 80mm, PMMA 70, 109, 129

048.465 Titanium bar, egg-shaped cross-section, regular, H 3 mm, L 50 mm, Ti 69, 108, 128

048.466 Titanium bar, egg-shaped cross-section, mini, H 2,3 mm, L 50 mm, Ti 69, 108, 128

048.470 Titanium bar matrix, incl. spacer, regular, H 4.5 mm, L 50 mm, Ti/brass 69, 70, 108, 109, 128, 129

048.471 Titanium bar matrix incl. spacer, mini, H 3.5 mm, L 50 mm, Ti/brass 69, 70, 108, 109, 128, 129

048.483C Abutment, 15° angled 141

048.484C Abutment, 20° angled 141

048.501 NNC Post for temporary restoration, crown, H 10.3mm, TAN 48

048.502 NNC Post for temporary restoration, bridge, H 10.3mm, TAN 48

048.505 NN Coping, H 9mm, Ti 140

048.527 NNC Analog for Solid abutment, for 048.547, H 14.3mm, TAN 52



048.540 RN Solid Abutment 6°, H 4mm, yellow, Ti 66

048.541 RN Solid Abutment 6°, H 5.5mm, grey, Ti 66

048.542 RN Solid Abutment 6°, H 7mm, blue, Ti 66

048.545 WN Solid Abutment 6°, H 4mm, green, Ti 86

048.546 WN Solid Abutment 6°, H 5.5mm, brown, Ti 86

048.547 NNC Solid abutment, H 4mm, yellow, Ti 52

048.548 NNC Solid abutment, H 5.5mm, gray, Ti 52

048.549 NNC Solid abutment, H 7mm, blue, Ti 52

048.550 NN Coping 15° angled, H 8,8 mm, Ti 140

048.551 NN Coping 20° angled, H 8,8 mm, Ti 140

048.571 RN synOcta® Meso Milling Cylinder, for synOcta® 1.5, crown, H 10mm, D 8mm, Ti 64

048.573 WN synOcta® Meso Milling Cylinder, for synOcta® 1.5, crown, H 10mm, D 10mm, Ti 84

048.579 NNC Impression cap, H 8mm, POM 52

048.581 NNC Locator® Abutment, H 1mm, Ti alloy with TiN coating 53






048.587 NNC Positioning cylinder for 048.547, H 10.2mm, POM 52



048.592 NNC Gold abutment, crown, H 3.6mm, Ceramicor® / TAN / POM 50

048.593 NNC Gold abutment, bridge, H 3.6mm, Ceramicor®/ TAN / POM 50

048.598 NNC Cementable abutment, straight, for crowns/bridges, H 5.7mm, Ti 49

048.601 RN synOcta® 1.5 screw-retained Abutment, H 1.5mm, TAN 64, 68, 69, 70

048.603 WN synOcta® 1.5 screw-retained Abutment, H 1.5mm, TAN 84


241

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



048.605 RN synOcta® Cementable Abutment, for crowns/bridges, H 5.5mm, Ti 59

048.606 WN synOcta® Cementable Abutment, H 5.5mm, Ti 79

048.608 WN synOcta® angled Abutment, Type A, angled 15°, H 5.5mm, Ti 80

048.609 WN synOcta® angled Abutment, Type B, angled 15°, H 5.5mm, Ti 80

048.610 RN synOcta® angled Abutment, long, Type A, angled 15°, H 6.7mm, Ti 60

048.611 RN synOcta® angled Abutment, long, Type B, angled 15°, H 6.7mm, Ti 60

048.612 RN synOcta® angled Abutment, short, Type A, angled 15°, H 5.7mm, Ti 60

048.613 RN synOcta® angled Abutment, short, Type B, angled 15°, H 5.7mm, Ti 60

048.615 RN synOcta® angled Abutment, long, Type A, angled 20°, H 6.7mm, Ti 60

048.616 RN synOcta® angled Abutment, long, Type B, angled 20°, H 6.7mm, Ti 60

048.617 RN synOcta® angled Abutment, short, Type A, angled 20°, H 5.7mm, Ti 60

048.618 RN synOcta® angled Abutment, short, Type B, angled 20°, H 5.7mm, Ti 60

048.621 NNC Cementable abutment, angled 15°, type A, H 5.9mm, Ti 49

048.622 NNC Cementable abutment, angled 15°, type B, H 5.9mm, Ti 49

048.632 RN synOcta® gold coping, bridge, for synOcta 1.5, H 4.25mm, Ceramicor®/POM 64

048.633 RN synOcta® gold coping, crown, for synOcta 1.5, H 4.25mm, Ceramicor®/POM 64

048.635 NN Gold coping, cast-on, H 10mm, Ceramicor®/POM 140

048.638 WN synOcta® gold coping, bridge, for synOcta 1.5, H 4.75mm, Ceramicor®/POM 84

048.639 WN synOcta® gold coping, crown, for synOcta 1.5, H 4.75mm, Ceramicor®/POM 84

048.642 RN synOcta® gold Abutment, crown, H 14.1mm, Ceramicor®/POM 62

048.644 WN synOcta® gold Abutment, crown, H 14.1mm, Ceramicor®/POM 82

048.654 RN Temporary Coping for Solid Abutment, bridge, H 8.5mm, PMMA 65

048.655 RN Temporary Coping for Solid Abutment, crown, H 8.5mm, PMMA 65

048.656 WN Temporary Coping for Solid Abutment, bridge, H 7.3mm, PMMA 85

048.657 WN Temporary Coping for Solid Abutment, crown, H 7.3mm, PMMA 85

048.658 NNC Temporary coping for Solid abutment, for crown, H 8.5mm, PMMA 52

048.659 NNC Temporary coping for Solid abutment, for bridge, H 8.5mm, PMMA 52

048.662 RN synOcta® Plastic Coping for 048.605, for bridge, H 7mm, POM 59

048.663 RN synOcta® Plastic Coping for 048.605, for crown, H 7mm, POM 59

048.664 RN Temporary abutment, D 7mm, H 10mm, VITA CAD-Temp® 59

048.666 WN synOcta® Plastic Coping, Bridge, H 10mm, POM 84

048.667 WN synOcta® Plastic Coping, Crown, H 10mm, POM 84

048.669 NN Temporary Coping, H 10mm, PEEK/TAN 140

048.670 Extension shell for angled RN synOcta® Abutm., H 5.5mm, POM 60

048.676V4 Plastic shoulder for RN synOcta® angled, angled 15° or 20°, H 4mm, POM 60

048.678 Plastic shoulder for WN synOcta® angled, angled 15°, H 4mm, POM 80

048.699 NNC Temporary abutment, D 5mm, H 10mm, VITA CAD-Temp® 48

048.700 NNC Protective cap for Solid abutment, for 048.547, H 5.6mm, PEEK 52



048.709 NNC Variobase® Abutment, with screw, D 3.9mm, H 3.75mm, TAN 50, 51

048.710 RN Variobase® Abutment, with screw, D 5.05mm, H 4mm, TAN 61, 63

048.711 WN Variobase® Abutment, with screw, D 7mm, H 4.5mm, TAN 80, 83

048.715 RN synOcta® Post for temporary restorations, for crown, H 9mm, Ti 59

048.716 RN synOcta® Post for temporary restorations, for bridge, H 9mm, Ti 59

048.717 WN synOcta® Post for temporary restorations, for crown, H 9mm, Ti 79

048.718 WN synOcta® Post for temporary restorations, for bridge, H 9mm, Ti 79

048.802 RN Gold Abutment, for bridge, H 12.3mm, Ceramicor®/POM/TAN 62

048.803 WN Gold Abutment, for bridge, H 12.5mm, Ceramicor®/POM/TAN 82

048.804V10 LOCATOR® Bar Abutment, Pack of 10 61, 80, 100, 120

048.804V2 LOCATOR® Bar Abutment, Pack of 2 61, 80, 100, 120

048.805V10 LOCATOR® Bar Male Processing Package, Pack of 10 61, 80, 100, 120

048.805V2 LOCATOR® Bar Male Processing Package, Pack of 2 61, 80, 100, 120

048.904 Tissue Level PLAN Set, 278x124x33 mm, PC 90

048.905 Tissue Level PLAN cassette, empty, 278x124x33mm, polymer 90

048.916V4 RN synOcta® angled PLAN Abutment, short, Type A, angled 15°, POM 91

048.917V4 RN synOcta® angled PLAN Abutment, short, Type B, angled 15°, POM 91

048.918V4 RN synOcta® angled PLAN Abutment, short, Type A, angled 20°, POM 91

048.919V4 RN synOcta® angled PLAN Abutment, short, Type B, angled 20°, POM 91

048.921V4 RN synOcta® Transversal PLAN Abutment, POM 91

048.922V4 RN synOcta® angled PLAN Abutment, Type A, angled 15°, POM 91

048.923V4 RN synOcta® angled PLAN Abutment, Type B, angled 15°, POM 91

048.924V4 RN synOcta® angled PLAN Abutment, Type A, angled 20°, POM 91

048.925V4 RN synOcta® angled PLAN Abutment, Type B, angled 20°, POM 91

048.926V4 RN PLAN Solid Abutment, H 4mm, POM 91

048.927V4 RN PLAN Solid Abutment, H 5.5mm, POM 91


242

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde



048.928V4 RN PLAN Solid Abutment, H 7mm, POM 91

048.929V4 RN synOcta® 1.5 screw-retained PLAN Abutment, POM 91

048.930V4 RN synOcta® Cementable PLAN Abutment, POM 91

048.931V4 WN synOcta® 1.5 screw-retained PLAN Abutment, POM 91

048.932V4 WN synOcta® Cementable PLAN Abutment, POM 91

048.933V4 WN synOcta® angled PLAN Abutment, Type A, angled 15°, POM 91

048.934V4 WN synOcta® angled PLAN Abutment, Type B, angled 15°, POM 91

048.938V4 WN PLAN Solid Abutment 6°, H 4mm, green, POM 92

048.939V4 WN PLAN Solid Abutment 6°, H 5.5mm, brown, POM 92

048.940V4 Bite registration aid, short, D 5 mm, H 8 mm, POM 58, 78

048.941V4 Bite registration aid, long, D 5 mm, H 12 mm, POM 58, 78

048.943V4 NNC PLAN Cementable abutment, straight, for crown/bridge, H 5.7mm, POM 90

048.944V4 NNC PLAN Cementable abutment, angled 15°, type A, H 5.9mm, POM 90

048.945V4 NNC PLAN Cementable abutment, angled 15°, type B, H 5.9mm, POM 90

048.946V4 NNC PLAN Locator® abutment, H 1mm, POM 90






048.952V4 NNC PLAN Solid Abutment, H 4mm, POM 90

048.953V4 NNC PLAN Solid Abutment, H 5.5mm, POM 90

048.954V4 NNC PLAN Solid Abutment, H 7mm, POM 90

048.960V4 NNC Bite registration aid, H 8mm, POM 48

048.961V4 NNC Bite registration aid, H 12mm, POM 48

049.071 Guide sleeve for implants Ø 4.1mm & Ø 3.5mm, Ø 4.2mm, L 5.6mm, stainless steel 178

049.076V4 X-ray reference sphere, Ø 5.0mm, stainless steel 164, 189

049.082 Guide cylinder for implants Ø 3.3mm & Ø 3.5mm, Ø 3.6mm, L 10.5mm, stainless steel 170, 178

049.083 Guide cylinder for implants Ø 4.1mm, Ø 4.2mm, L 10.5mm, stainless steel 178

049.154 Transversal screw for 048.620, D 2 mm, L 3 mm, TAV 141

049.167 Guide cylinder for implant Ø 4.8mm, Ø 4.9mm, L 10.5mm, stainless steel 178

049.177 NN Occlusal screw, L 5mm, D 1.8mm, TAN 140

049.181 SCS Occlusal screw for guiding sleeve, and post for temp. restorations, L 7.6 mm, TAN 59, 79, 178, 190

049.182 SCS Guiding cylinder for NN implant Ø 3.3mm, L 5mm, Ti/stainless steel 178

049.360 SCS Guiding cylinder for NNC implant Ø 3.3mm, L 10.1mm, stainless steel 178

049.361 48h Explantation device for STL implant NNC, L 31.4mm, stainless steel 179

049.810V4 Drill sleeve with collar, inner Ø 2.4mm, outer Ø 3.5mm, L 10mm, Ti 189

049.816V4 Pin for 049.810, Ø 2.2mm, L 16mm, Ti 189


049.818V4 Stepped pin for 049.810, Ø 2.2mm/3.5mm, L 16mm, Ti 189


049.850 Guide sleeve for implants Ø 3.3mm, Ø 3.6mm, L 4.5mm, stainless steel 178

049.851 Guide sleeve for implants Ø 4.8mm, Ø 4.9mm, L 6.4mm, stainless steel 178

070.203 Straumann® BoneCeramic™ 400-700 µm, 0.25 g 148



075.098 Straumann® Emdogain® 0.15 ml 153



075.114 Straumann® Emdogain® 0.3 ml Multipack 153

075.116 Straumann® Emdogain® 0.7 ml Multipack 153

075.117 Straumann® Emdogain® PLUS 153

075.203 Straumann® PrefGel® 5 x 0.6 ml, syringe 153

120.0033 Set 5:1 Bone Level Implant 192

140.024 5:1 Model, ITI® synOcta®system, plastic case 192

140.032 Clear model mandible 193

140.033 Clear model maxilla 193

140.049 Clear model mandible, with 4 implants 193

140.055 Membranette 188

140.062 Tapered Effect Implant, Ø 4.1 mm, RN, SLA 10.0 mm, steel, cardboard 192

140.122 Straumann® Standard Plus NNC implant, 5:1 Model Box 192

150.215 x-ray template for Standard and Standard Plus Implants 164

150.216 x-ray template for Bone Level Implants 164

150.230 X-ray templates for Tapered Effect Implant 164

80087 Explantation instrument for synOcta® implants, long, L 26.6mm, stainless steel 179

80103 Explantation instrument for synOcta® implants, short, L 20.6mm, stainless steel 179


243

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x



80356 TempImplant Bendingtool, L 82.0 mm, H 21.0 mm, stainless steel 42

80363 TempImplant Inserting device, mechanical, L 21.5mm, stainless steel 42

80371SV4 TempImplant, Ø 2.0mm, L 10.0mm, Ti-6AI-7Nb 42

80372SV4 TempImplant, Ø 2.0mm, L 12.0mm, Ti-6AI-7Nb 42

80381 Drill Ø 1.5mm, L 37.0 mm, stainless steel 42

80398 TempImplant Inserting device, manual, L 19mm, stainless steel 42

80399V4 Dalbo®-Rotex® Matrix, PA 42

BO-1510 cerabone® granules 0.5-1.0mm, natural bovine bone, 1x0.5cc(ml)/box 149








BO-1720 cerabone® Block 20x20x10mm, 1 piece/box 149

BO-20005 maxresorb® granules 0.5-1.0mm, synthetic bi-phasic calcium phosphate, 1x0.5cc(ml)/box 148




BO-21211 maxresorb® block 20x10x10mm, synthetic bi-phasic calcium phosphate, 1 piece/box 148

BO-21221 maxresorb® block 20x20x10mm, synthetic bi-phasic calcium phosphate, 1 piece/box 148

BO-22005 maxresorb® inject 0.5cc, synthetic injectable bone paste, 1 syringe/box 148



BO-30005 maxgraft® granules 0.5-2.0mm, processed human allograft, 1x0.5cc(ml)/box 146




BO-31005 maxgraft® cortico-cancellous granules 0.5-2.0mm, processed human allograft, 1x0.5cc(ml)/box 146




BO-31111 maxgraft® Block unicortical cancellous 10x10x10mm, 1 block/box 146

BO-31112 maxgraft® Block unicortical cancellous 10x10x20mm, 1 block/box 146

BO-32111 maxgraft® Block cancellous 10x10x10mm, 1 block/box 146

BO-32112 maxgraft® Block cancellous 10x10x20mm, 1 block/box 146

BO-33000 maxgraft® bonering surgical kit, Trephine with Pin OD 6mm; Trephine with Pin AD 7mm; Planator with Pin AD 7mm; Pilot Drill Ø 155

BO-33001 Pilot drill Ø 2mm 155

BO-33002 Trephine 6mm 155

BO-33003 Trephine 7mm 155

BO-33004 Diamond tulip 155

BO-33005 Diamond disc 155

BO-33006 Planator, 6mm 155

BO-33007 Planator 7mm 155

BO-33008 Instrument rack 155

BO-33009 Instrument tray maxgraft® bonering 155

BO-33010 bonering fix 155

BO-33160 botiss bonering®, Ø 6mm/3.3mm (outer/inner diameter), H 10mm, not slotted 146

BO-33170 botiss bonering®, Ø 7mm/3.3mm (outer/inner diameter), H10mm, not slotted 146

BO-33174 maxgraft® bonering 4.1 L: 10 mm, D: 7 mm 146

BO-511112 collacone®, native collagen alveo cone, 12 pieces/box 152

BO-600612 Jason® G fleece 2.5x2.5cm, with Gentamicin, pH-neutral, 12 pieces/box 152

BO-601520 collprotect® membrane 15x20mm, 1 piece/box 150



BO-681520 Jason® membrane 15x20mm, Pericardium Collagene Membrane, 1 piece/box 150



BO-690412 Jason® collagen fleece 2x2cm, native collagen fleece, 12 pieces/box 152

BO-692510 Jason® collagen fleece 5x5cm, native collagen fleece, 10 pieces/box 152

BO-701520 mucoderm® 15x20mm, 1 piece/box 151



BO-PMIa Patient matched allogenic implant, botiss bonebuilder® 147


244

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

245

HQ

/ 26

.12.

2015

/ En

glis

h

Info

rmat

ion

and

Inde

x

Contacts

Algeria EURL ImplantomedRue du 11 Décembre 1960 No. 78Ouled Chebel, BirtoutaDZ-AlgerPhone: +213 2128 3255Fax: +213 2129 3255E-mail: [email protected]

Argentina Manohay Argentina S.A.Av Juana Manso 555, „7 E“AR-C1107CBK, Buenos AiresPhone: +54 11 2150 6540E-mail: [email protected]

Syncrotech SRLJerónimo Salguero 1575 3°pisoAR-1177AFC, Buenos AiresPhone: +54 11 4511 9520Fax: +54 11 4511 9524E-mail: [email protected]

Armenia K & A STUDIOAbovyan str. build 66/13AM-0025 YerevanPhone: +374 10 563 282E-mail: [email protected]

AustraliaStraumann Australia P/L7 Gateway CrtAU-Port Melbourne 3207, VictoriaPhone: +61 3 9621 1300Fax: +61 3 9646 7232Phone: 1800 660 330(toll free for Australia)Phone: 0800 408 370(toll free for New Zealand)E-mail: [email protected]

Austria Straumann GmbHFlorido TowerFloridsdorfer Hauptstrasse 1AT-1210 ViennaPhone: +968 241 27491Fax: +968 241 27492E-mail: [email protected]

Bahrain Gulf PharmacyBldg No. 2038, Road No. 4156, Block 341P.O. Box 2576BH-Al JuffairPhone: +973 1723 9399Fax: +973 1723 2230E-mail: [email protected]

Belgium Straumann NV/SABelgicastraat 3/Building 503BE-1930 ZaventemPhone: +32 2 790 1000Fax: +32 2 790 1020E-mail: [email protected]

Brazil JJGC SAAv. Visconde de Guarapuava, 3832BR-80250-220 Curitiba (PR)Phone: 0800 770-6683Phone: +55 11 3058-6888E-mail: [email protected]

Bulgaria Ultradental Ltd.Kniaz Boris I St., No. 10, ground floorBG-1463 SofiaPhone: +359 2 953 3557Fax: +359 2 953 3559E-mail: [email protected]

Canada Straumann Canada Limited3375 North Service Road, Unit B12-14CA-Burlington, Ontario L7N 3G2Phone: 800/363 4024Fax: 866/524 6752E-mail: [email protected]

Chile Syncrotech SpAAv. Nueva Providencia 2155 Torre C of. 902CL-7500000, Santiago de ChilePhone: +56 990 234 928E-mail: [email protected]

China Straumann (Beijing) MedicalDeviceConsulting Co. Ltd.3Fl, Tower B, Jiaming Centre27#, Dongsanhuan BeiluChaoyang DistrictCN-Beijing 100020Phone: +86 10 5775 6555Fax: +86 10 5775 6556E-mail: [email protected]

Colombia Manohay Colombia SASCarrera 9 #115-06 18th floor Room 1806Edificio Tierra FirmeCO-Bogotá – ColombiaPhone: +57 (1) 756-2962Fax: +57 (1) 756-3002E-mail: [email protected]

Croatia Sanitaria Dental d.o.o.Korculanska 4-6HR-1000 ZagrebPhone: +385 1618 1178Fax: +385 1618 3059E-mail: [email protected]

Czech Republic Straumann s.r.o.Na _ertvách 2196/34CZ-180 00 Prague 8Phone: +420 2 8409 4650Fax: +420 2 8409 4659E-mail: [email protected]

Denmark Straumann Danmark ApSNygårds Plads 21.1DK-2605 BrøndbyPhone: +45 4616 0666Fax: +45 4361 2581E-mail: [email protected]

Finland Straumann OyFredrikinkatu 48 A 7 krsFI-00100 HelsinkiPhone: +358 9694 2877Fax: +358 9694 0695E-mail: [email protected]

Contacts

AlgeriaEURL ImplantomedRue du 11 Décembre 1960 No. 78Ouled Chebel, BirtoutaDZ-AlgerPhone: +213 2128 3255Fax: +213 2129 3255E-mail: [email protected]

ArgentinaManohay Argentina S.A.Av Juana Manso 555, „7 E“AR-C1107CBK, Buenos AiresPhone: +54 11 2150 6540E-mail: [email protected]

Syncrotech SRLJerónimo Salguero 1575 3°pisoAR-1177AFC, Buenos AiresPhone: +54 11 4511 9520Fax: +54 11 4511 9524E-mail: [email protected]

ArmeniaK & A STUDIOAbovyan str. build 66/13AM-0025 YerevanPhone: +374 10 563 282E-mail: [email protected]

AustraliaStraumann Australia P/L7 Gateway CrtAU-Port Melbourne 3207, VictoriaPhone: +61 3 9621 1300Fax: +61 3 9646 7232Phone: 1800 660 330(toll free for Australia)Phone: 0800 408 370(toll free for New Zealand)E-mail: [email protected]

AustriaStraumann GmbHFlorido TowerFloridsdorfer Hauptstrasse 1AT-1210 ViennaPhone: +968 241 27491Fax: +968 241 27492E-mail: [email protected]

BahrainGulf PharmacyBldg No. 2038, Road No. 4156, Block 341P.O. Box 2576BH-Al JuffairPhone: +973 1723 9399Fax: +973 1723 2230E-mail: [email protected]

BelgiumStraumann NV/SABelgicastraat 3/Building 503BE-1930 ZaventemPhone: +32 2 790 1000Fax: +32 2 790 1020E-mail: [email protected]

BrazilJJGC SAAv. Visconde de Guarapuava, 3832BR-80250-220 Curitiba (PR)Phone: 0800 770-6683Phone: +55 11 3058-6888E-mail: [email protected]

BulgariaUltradental Ltd.Kniaz Boris I St., No. 10, ground floorBG-1463 SofiaPhone: +359 2 953 3557Fax: +359 2 953 3559E-mail: [email protected]

CanadaStraumann Canada Limited3375 North Service Road, Unit B12-14CA-Burlington, Ontario L7N 3G2Phone: 800/363 4024Fax: 866/524 6752E-mail: [email protected]

ChileSyncrotech SpAAv. Nueva Providencia 2155 Torre C of. 902CL-7500000, Santiago de ChilePhone: +56 990 234 928E-mail: [email protected]

ChinaStraumann (Beijing) MedicalDeviceConsulting Co. Ltd.3Fl, Tower B, Jiaming Centre27#, Dongsanhuan BeiluChaoyang DistrictCN-Beijing 100020Phone: +86 10 5775 6555Fax: +86 10 5775 6556E-mail: [email protected]

ColombiaManohay Colombia SASCarrera 9 #115-06 18th floor Room 1806Edificio Tierra FirmeCO-Bogotá – ColombiaPhone: +57 (1) 756-2962Fax: +57 (1) 756-3002E-mail: [email protected]

CroatiaSanitaria Dental d.o.o.Korculanska 4-6HR-1000 ZagrebPhone: +385 1618 1178Fax: +385 1618 3059E-mail: [email protected]

Czech RepublicStraumann s.r.o.Na _ertvách 2196/34CZ-180 00 Prague 8Phone: +420 2 8409 4650Fax: +420 2 8409 4659E-mail: [email protected]

DenmarkStraumann Danmark ApSNygårds Plads 21.1DK-2605 BrøndbyPhone: +45 4616 0666Fax: +45 4361 2581E-mail: [email protected]

FinlandStraumann OyFredrikinkatu 48 A 7 krsFI-00100 HelsinkiPhone: +358 9694 2877Fax: +358 9694 0695E-mail: [email protected]

France Straumann S.à.r.l.3, rue de Galmy-ChessyFR-77701 Marne-la-Vallée, Cedex 4Phone: +33 1 6417 3000Fax: +33 1 6417 3010E-mail: [email protected]

Germany Straumann GmbHJechtinger Strasse 9DE-79111 FreiburgPhone: +49 761 4501 0Fax: +49 761 4501 149E-mail: [email protected]

Greece Denco Dental SA15 Mesogion AvenueGR-11526 AthensPhone: +30 210 777 0670Fax: +30 210 748 6002E-mail: [email protected]

Hong Kong Advance Dental ConsultingRoom 1303-05, Wing Kwok Centre182 Woo Sung StreetJordan, KowloonHK-Hong KongPhone: +852 2384 7666Fax: +852 2388 0960E-mail: [email protected]

Hungary Straumann GmbHMagyarországi FióktelepeM3 Business CenterHungária körút 179-187HU-1146 BudapestPhone: +36 1 787 1095Fax: +36 1 787 1096E-mail: [email protected]

Iceland E. Bridde ehfSudurladsbraut 32IS-108 ReykjavikPhone: +354 577 1215Fax: +354 577 1216E-mail: [email protected]

Indonesia FondacoAPL Tower, Podomoro City27th Floor, Suite 2Jl. Letjen S. Parman Kav. 28Grogol PetamburanID-Jakarta Barat 11470Phone: +62 21 2903 4388Fax: +62 21 2903 4391E-mail: [email protected]

Iran Mehrarabon Co. - NorouziBorjsaz Bld, Azadi St1st Floor, Block 1IR-1313654913 TeheranPhone: +9821 66 43 98 17-9Fax: +9821 66 58 09 35

Israel Dentorient Fuss28, Hagdud Haivri StreetP.O. Box 2232IL-Tel Aviv 61021Phone: +972 3 6393640Fax: +972 3 6393645E-mail: [email protected]

Israel For regenerative productsH.A. Systems Ltd.32 Tuval StreetIL-5252243 Ramat-GanPhone: +972 3 6138777Fax: +972 3 6138778E-mail: [email protected]

Italy Straumann Italia srlViale Bodio 37IT-20158 MilanoPhone: +39 02 3932 831Fax: +39 02 3932 8365E-mail: [email protected]

Japan For Straumann® Dental Implant System andCARES® Digital SolutionsStraumann Japan K.K.Mita Bellju Bldg. 6F5-36-7 Shiba, Minato-ku,JP-Tokyo 108-0014Phone: +81 3 6858 1188Fax: +81 3 6858 4945E-mail: [email protected]

Jordan Arab Medical & Scientific Alliance A.M.S.A.P.O. Box 2509, 11953 Tela’ Al-AliJO-AmmanPhone: +962 6 552 8009Fax: +962 6 553 2358E-mail: [email protected]

Kuwait AlphaMedical Co.Bneid Al-Qar, Block 6 - Str. 63Bldg. 15 Floor 13P.O. Box 6267KW-22073 SalmiyaPhone: +965 2 247 8612Fax: +965 2 247 8613E-mail: [email protected]

Lebanon Prodent s.a.l.429, 10th Street BsalimP.O. Box 165 884LB-22439 MetnPhone: +961 4 717 334E-mail: [email protected]

Lithuania UAB “MED GRUPE”Gyneju 14-65LT-01109 VilniusPhone: +370 5 276 1377Fax: +370 5 275 6850E-mail: [email protected]

Macedonia Dentomed-M Ltd.Bojmija Str. 2/2, P.O. BoxMK-1000 SkopjePhone: +389 2 2462 739Fax: +389 2 2462 781E-mail: [email protected]

Malaysia Titleray Dental Implantsc/o Ricerfarma Marketing (M) Sdn BhdA-5-28, Penthouse SuiteIOI Boulevard, Jalan Kenari 5Bandar Puchong JayaMY-47170 Puchong, Selangor DEPhone: +60 3 8075 4644Fax: +60 3 8075 0995E-mail: [email protected]

Malta Bart Enterprises Ltd.42A, Main StreetMT-Balzan BZN 06Phone: +356 2144 7340Fax: +356 2144 7341E-mail: [email protected]

Mexiko Manohay México, S.A. de C.V.Rubén Darío #281-1101 piso 11Col. Bosque de ChapultepecMX-11580 - México, D.F.Phone: +52 55 5282-6262Fax: +52 55 5282-6289E-mail: [email protected]

Morocco Société Academy3, rue Tabit Bnou Korra, (Avenue Driss 1er)Quartier des HôpitauxMA-20360 CasablancaPhone: +212 5 2286 2671Fax: +212 5 2286 2672E-mail: [email protected]

Netherlands Straumann BVEinsteinweg 15NL-3404 LE IJsselsteinPhone: +31 30 604 6611Fax: +31 30 604 6728E-mail: [email protected]

Norway Straumann ASNedre Vollgate 3P.O. Box 1751 VikaNO-0122 OsloPhone: +47 2335 4488Fax: +47 2335 4480E-mail: [email protected]

Oman Ibn Sina Medical Supply LLCP.O. Box 481, Mina Al FahalOM-116 Sultanate of OmanPhone: +968 241 27491Fax: +968 241 27492E-mail: [email protected]

Pakistan Ahmad Enterprises7-B New Muslim TownPK-Lahore, PunjabPhone: +92 42 586 6975Fax: +92 42 586 0945E-mail: [email protected]

Panama Kiss Dental DesignCalle Avenida a Simon Bolivar Edificio PH Tikal, apto. / Local 11Corregimiento de Bella Vista, Urbanización El CarmenPA-Distrito de PanamáPhone: + 507 6911 7421

Philippines DentistreeRm. 206 Philippine College of Surgeons Bldg.992 EDSA, Quezon City, 1105PhilippinesPhone: +63 917 531 0186Fax: +63 2 927 1631E-mail: [email protected]

Poland Schmidt Dental Oliver SchmidtUl. Szymanowskiego 2PL-80-280 GdanskPhone: +48 58 341 45 79E-mail: [email protected]

Portugal Straumann S.A.Lagoas Park, Edificio 11, Piso 3PT-2740-244 Porto SalvoPhone: +351 21 422 9170Fax: +351 21 421 2144E-mail: [email protected]

Qatar Ali Bin Ali303 C, Jaidah Square, #63 Airport RoadUmm Ghuwailina-Zone 27, P.O. Box 75QA-DohaPhone: +974 4479 9000E-mail: [email protected]

Romania Implant Division s.r.l.Str. Dr. Dimitrie Grecescu nr. 18Sector 5RO-050598 BucharestPhone: +40 21 3135 224E-mail: [email protected]

Russia Straumann LLC Leninsky prospect 119A119571 Moscow, RussiaPhone: +7 495 139 74 74Fax: +7 495 139 74 75E-mail: [email protected]

Saudi Arabia Thimar Al Jazirah56 Prince Fawaz Bin Abdul Aziz St.Malaz Dist.SA-11421 RiyadhPhone: +966 1 445 4545Fax: +966 1 493 4568E-mail: [email protected]

Serbia Swissdent dooVojvode Stepe 129YU-11000 BelgradePhone: +381 11 396 2111Fax: +381 11 396 2444E-mail: [email protected]

Singapore Implant FocusNo. 6 Ubi Road 1#3-01/04-01Wintech CentreSG-Singapore 408726Phone: +65 6741 5411Fax: +65 6742 3593E-mail: [email protected]

MalaysiaTitleray Dental Implantsc/o Ricerfarma Marketing (M) Sdn BhdA-5-28, Penthouse SuiteIOI Boulevard, Jalan Kenari 5Bandar Puchong JayaMY-47170 Puchong, Selangor DEPhone: +60 3 8075 4644Fax: +60 3 8075 0995E-mail: [email protected]

MaltaBart Enterprises Ltd.42A, Main StreetMT-Balzan BZN 06Phone: +356 2144 7340Fax: +356 2144 7341E-mail: [email protected]

MexikoManohay México, S.A. de C.V.Rubén Darío #281-1101 piso 11Col. Bosque de ChapultepecMX-11580 - México, D.F.Phone: +52 55 5282-6262Fax: +52 55 5282-6289E-mail: [email protected]

MoroccoSociété Academy3, rue Tabit Bnou Korra, (Avenue Driss 1er)Quartier des HôpitauxMA-20360 CasablancaPhone: +212 5 2286 2671Fax: +212 5 2286 2672E-mail: [email protected]

NetherlandsStraumann BVEinsteinweg 15NL-3404 LE IJsselsteinPhone: +31 30 604 6611Fax: +31 30 604 6728E-mail: [email protected]

NorwayStraumann ASNedre Vollgate 3P.O. Box 1751 VikaNO-0122 OsloPhone: +47 2335 4488Fax: +47 2335 4480E-mail: [email protected]

OmanIbn Sina Medical Supply LLCP.O. Box 481, Mina Al FahalOM-116 Sultanate of OmanPhone: +968 241 27491Fax: +968 241 27492E-mail: [email protected]

PakistanAhmad Enterprises7-B New Muslim TownPK-Lahore, PunjabPhone: +92 42 586 6975Fax: +92 42 586 0945E-mail: [email protected]

PanamaKiss Dental DesignCalle Avenida a Simon Bolivar Edificio PH Tikal, apto. / Local 11Corregimiento de Bella Vista, Urbanización El CarmenPA-Distrito de PanamáPhone: + 507 6911 7421

PhilippinesDentistreeRm. 206 Philippine College of Surgeons Bldg.992 EDSA, Quezon City, 1105PhilippinesPhone: +63 917 531 0186Fax: +63 2 927 1631E-mail: [email protected]

PolandSchmidt Dental Oliver SchmidtUl. Szymanowskiego 2PL-80-280 GdanskPhone: +48 58 341 45 79E-mail: [email protected]

PortugalStraumann S.A.Lagoas Park, Edificio 11, Piso 3PT-2740-244 Porto SalvoPhone: +351 21 422 9170Fax: +351 21 421 2144E-mail: [email protected]

QatarAli Bin Ali303 C, Jaidah Square, #63 Airport RoadUmm Ghuwailina-Zone 27, P.O. Box 75QA-DohaPhone: +974 4479 9000E-mail: [email protected]

RomaniaImplant Division s.r.l.Str. Dr. Dimitrie Grecescu nr. 18Sector 5RO-050598 BucharestPhone: +40 21 3135 224E-mail: [email protected]

RussiaStraumann LLC Leninsky prospect 119A119571 Moscow, RussiaPhone: +7 495 139 74 74Fax: +7 495 139 74 75E-mail: [email protected]

Saudi ArabiaThimar Al Jazirah56 Prince Fawaz Bin Abdul Aziz St.Malaz Dist.SA-11421 RiyadhPhone: +966 1 445 4545Fax: +966 1 493 4568E-mail: [email protected]

SerbiaSwissdent dooVojvode Stepe 129YU-11000 BelgradePhone: +381 11 396 2111Fax: +381 11 396 2444E-mail: [email protected]

SingaporeImplant FocusNo. 6 Ubi Road 1#3-01/04-01Wintech CentreSG-Singapore 408726Phone: +65 6741 5411Fax: +65 6742 3593E-mail: [email protected]

Slovenia Dentalia d.o.o.Celovska 197SI-1000 LjublianaPhone: +386 1 583 7730Fax: +386 1 510 3215E-mail: [email protected]

South Africa ASM Consultants (Pty) Ltd.PO Box 1453Parklands 2121ZA-JohannesburgPhone: +27 11 447 1511Fax: +27 11 880 8694E-mail: [email protected]

South Korea Straumann Dental Korea Inc.1005 Korea Trade TowerSamseong 1-dongGangnam-guKR-Seoul 135-729Phone: +82 2 2149 3800Fax: +82 2 2149 3810E-mail: [email protected]

Spain Straumann S.A.Edificio Arroyo AAvda. Bruselas, 38ES-28108 Alcobendas - MadridPhone: +34 91 344 7700Fax: +34 91 344 9517E-mail: [email protected]

Sweden Straumann ABKrokslätts Fabriker 45SE-431 37 MölndalPhone: +46 31 708 7500Fax: +46 31 708 7529E-mail: [email protected]

Switzerland Straumann SchweizPeter Merian-Weg 12PostfachCH-4002 BaselTel.: 0800 810 812Fax: 0800 810 813E-mail: [email protected]

Taiwan Kingcraft Scientific Inc.3F. No 19 Bao‘an St. Datong DistrictTW-10346 Taipei CityTaiwan R.O.C.Phone: +886 2 2553 5288Fax: +886 2 255 30918E-mail: [email protected]

Thailand DKSH (Thailand) Limited2106 Sukhumvit RoadTH-Bangkok 10260Phone: +66 2220 9000Fax: +66 2225 8992E-mail: [email protected]

Turkey Batı Dental Ic Ve Dis TicaretA.S.Paragon TowerKızılırmak Mah. Ufuk Uni. Cad. 1445.Sk. BBlok No:2 /83-84 16.KatTR-Çukurambar – AnkaraPhone: +90 312 434 2000Fax: +90 312 434 2042E-mail: [email protected]

Ukraine INSPE42, Br. Mikhnovskykh St.UA-79018 LvivPhone: +38 32 240 3705Fax: +38 32 294 8399E-mail: [email protected]

United Arab Emirates Al-Hayat Pharmaceuticals U.A.E.Al Whada StreetP.O. Box 4483AE-SharjahPhone: +971 6 559 2481Fax: +971 6 559 3573E-mail: [email protected]

United Kingdom Straumann Ltd.3 Pegasus PlaceGatwick RoadGB-Crawley RH10 9AY, West SussexPhone: +44 1293 65 1230Fax: +44 1293 65 1239E-mail: [email protected]

Uruguay Syncrotech S.A.Avenida Brasil 2483Oficina 702UY-11300 MontevideoPhone: +598 2 708 3236E-mail: [email protected]

USA Straumann USA, LLCNorth American Headquarters60 Minuteman RoadUS-Andover, MA 01810Phone: 800/448 8168Fax: 978/747 2490E-mail: [email protected]

Vietnam SDI Vina Co. Ltd.389A Cach Mang Thang TamStreetWard 13, District 10VN-Ho Chi Minh CityPhone: +84 989 757 736

International Headquarters Institut Straumann AGPeter Merian-Weg 12CH-4002 Basel, SwitzerlandPhone: +41 (0)61 965 11 11Fax: +41 (0)61 965 11 01E-mail: [email protected]

International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone +41 (0)61 965 11 11 Fax +41 (0)61 965 11 01 www.straumann.com

© Institut Straumann AG, 2016. All rights reserved.Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved. 12

/15

452.

200/

en/A

/00

BH

0011

6

product catalog - straumann · even more simply doing more than you expect patients are expecting...

Documents