product catalogue edition 2018building · thickness approx. 5 mm impact sound insulation Δl w =...

PRODUCT CATALOGUEBUILDINGedition 2018

Real solutions for real issues.

Isolmant’s mission is to provide construction companies with a range of innovative solutions for acoustic and thermal insulation.Its focus is on energy saving, compliance with acoustic and thermal insulation regulations as well as with sustainability protocols. All the Isolmant’s functions - Manufacturing, Sales, Marketing, Research, & Development - are committed to fulfil this mission: sustainability.That also means to manufacture products in line with the highest standards of construction.Isolmant releases its products only after strict quality controls, laboratory tests and installation tests.Thanks to this process, our products are suitable for their applications and the on-site performances confirming their lab results.Great attention also goes to the range of accessories, specifically designed for the usage. The accessories alsoallow a state of the art installation and time saving. Moreover, our accessories enhance each range best performances.

CONTENTSAPPLICATION PRODUCT PAG

IMPACT SOUND INSULATION

Underscreed insulation Isolmant Special 6Isolmant Special 5 Renovation 7Isolmant UnderPlusBlack.E 8Isolmant Monoplus 9Isolmant Radiante 10Isolmant UnderSpecial 11Isolmant UnderSpecial EVO 12Isolmant BiPlus 13Isolmant Super BiPlus 14Isolmant IsolTile 15Isolmant Fibra HD 16Isolmant D311 17

Accessories Isolmant Fascia Perimetrale Stacca/Attacca 18Isolmant Fascia Perimetrale Tecnica Reticolata 19Isolmant Fascia Perimetrale Tecnica Radiante 20Isolmant Fascia Perimetrale Tecnica Doppio Spessore 21Isolmant Fascia Perimetrale 6.E 22Isolmant Fascia Perimetrale 10.E 23Isolmant Fascia Nastro 24

Staircase insulation Kit Scale 25

AIRBORNE SOUND INSULATION

Cavity wall insulation Isolmant Polimuro 26Isolmant Perfetto TR 27Isolmant Perfetto Special 28Isolmant Fibra LC 29Isolmant Fascia Tagliamuro Standard/Strong 30

False wall insulation Isolmant Perfetto CG 31Isolmant Nastro Orditura Cartongesso 32

OUTDOOR SOUND INSULATION

Rolling shutter box insulation Isolmant Telogomma Cassonetti 33

EQUIPMENTS NOISE INSULATION

Installations noise insulation Isolmant Telogomma Tubi 34

VISCO-ELASTIC MASS

Isolmant Telogomma 35Isolmant Telogomma E+45 36Isolmant Telogomma TT 37

SPECIAL PRODUCTS

Isolmant Cemento Armato 38Isolmant Damp 39Isolmant Strong 40

Full technical specifications at www.isolmant.com6

> ISOLMANT SPECIAL

IMPACT SOUND INSULATION > UNDERSCREED INSULATION

> To be installed with the embossed and screen printed side facing upwards.

THICKNESS Approx. 3 - 5 - 10 - 15 mm


ΔLw = 19 dB (3 mm version) Value calculated according to EN ISO 12354-2 and UNI/TR 11175ΔLw = 25.5 dB (5 mm version) Certified valueΔLw = 28 dB (10 mm version) Certified value

DYNAMIC STIFFNESSs’ = 80 MN/m3 (3 mm version)s’ = 60 MN/m3 (5 mm version)s’ = 32 MN/m3 (10 mm version)

THERMAL CHARACTERISTICSλ = 0.035 W/mKc = 2100 J/kgKμ = 3600

SIZE

Rolls of:1.50 m x 5 0 m (h x L) = 150 m2 (3 mm version)1.50 m x 50 m (h x L) = 75 m2 (5 mm and 10 mm version)1.50 m x 30 m (h x L) = 45 m2 (15 mm version)Product with overlaps (10 and 15 mm version)

PACKAGING Single rolls

Innovative Isolmant with embossed and screen printed upper side.This product is made of high quality expanded closed-cell physicallycross-linked polyethylene.

Isolmant Special, upon request, it is available covered with a special tissue anti-tearing. Production cost 0,86 €/m2 (only versions h.1,50)

> Conditions of useIsolmant Special is recommended for impact sound insulations of horizontal partitions. This product is suitable for applications between the levelling substrate and the screed in double-layer flooring. It ensures performance and quality over the time thanks to its physical characteristics. The finishing screed should be at least 5 cm (for Isolmant Special 3 and 5 mm) or at least 7 cm (for Isolmant Special 10 mm). Screeds with lower thickness should be reinforced by means of a suitable metal mesh or fibres.

> Item specificationsThe resilient layer is made of second-generation expanded closed-cell physically cross-linked polyethylene. This product ensures an even performance and high compressive strength over the time (type Isolmant Special). The company logo should be placed in a visible position. Product with overlaps (10 and 15 mm version).Density 30 kg/m3. Thickness ... mm (3 - 5 - 10 - 15 mm). Dynamic stiffness MN/m3 (80 - 60 - 32 MN/m3 for the 3 - 5 - 10mm versions respectively).

Rt = 0.086 m2K/W (3 mm version)Rt = 0.142 m2K/W (5 mm version)Rt = 0.284 m2K/W (10 mm version)Rt = 0.426 m2K/W (15 mm version)

Full technical specifications at www.isolmant.com 7

> ISOLMANT SPECIAL 5 RENOVATION


> To be installed with the embossed and screen printed side facing upwards.

THICKNESS Approx. 5 mm

IMPACT SOUND INSULATION ΔLw = 25.5 dB Certified value

DYNAMIC STIFFNESS s’ = 60 MN/m3

THERMAL CHARACTERISTICSλ = 0.035 W/mKc = 2100 J/kgKμ = 3600

SIZE Rolls of:1.00 m x 15 m (h x L) = 15 m2


Innovative Isolmant with embossed and screen printed upper side. This product is made of high quality expanded closed-cell physically cross-linked polyethylene.

> Conditions of use

Isolmant Special is recommended for impact sound insulations of horizontal partitions. This product is suitable for applications between the levelling substrate and the screed in double-layer flooring. It ensures performance and quality over the time thanks to its physical characteristics. The finishing screed should be at least 5 cm (Isolmant Special 5 mm). Screeds with lower thickness should be reinforced by means of a suitable metal mesh or fibres.

> Item specifications

The resilient layer is made of second-generation expanded closed-cell physically cross-linked polyethylene. This product ensures an even performance and high compressive strength over the time (type Isolmant Special). The company logo should be placed in a visible position. Product with overlaps (10 and 15 mm version).Density 30 kg/m3. Thickness 5 mm. Dynamic stiffness MN/m3 60 MN/m3

Rt = 0.142 m2K/W



> ISOLMANT UNDERPLUSBLACK.E

> To be laid with the fibre facing down.


IMPACT SOUND INSULATION ΔLw = 26 dB Value certified according to UNI EN ISO 10140

DYNAMIC STIFFNESS s’ = 17 MN/m3 Tested value according to EN 29052-1

THERMAL RESISTANCE Rt = 0,171 m2K/W

SIZE

Rolls of:1,50 m x 50 m (h x L) = 75 m2

Product with overlaps.Once overlapped, the sheets should be sealed by means of Isolmant Nastro Telato or Isolmant Fascia Nastro


Product comprising crosslinked closed-cell polyethylene foam, about 3 mm thick, joined on the underside to FIBTEC XF1 (special needled fibre produced to specifications designed to provide optimum noise reduction).

> Conditions of use

Isolmant UnderPlusBlack.E guarantees high impact noise insulation and also better airborne noise reduction.Isolmant UnderPlusBlack.E is particularly suitable for two-layer structure, with the floating screed installed on the leveling layer. It requires finishing screed thickness of at least 5 cm; for lower thickness it is recommended to reinforce the screed with suitable metal mesh or fibre. Care must be taken when applying ceramic tiles on fresh screed.


Resilient layer of 3 mm crosslinked closed-cell polyethylene foam, joined on the underside to a needled fibre to improve soundproofing (such as Isolmant UnderPlus Black.E). To be laid with the fibre facing down.Product with overlaps. Thickness approximately 7 mm. Dynamic stiffness 17 MN/m3.


> ISOLMANT MONOPLUS

> To be positioned with the screen-printed fabric facing upwards.


IMPACT SOUND INSULATION ΔLw = 26 dB Value calculated according to EN ISO 12354/-2 and UNI/TR 11175


THERMAL RESISTANCE Rt = 0.171 m2K/W

SIZE

Rolls of:1.50 m x 50 m (h x L) = 75 m2

This product comes with adhesive flap to seal the overlappingfabric


Product made of 3 mm Isolmant with the upper side bonded to FIBTEC XT2 (screen printed anti-tearing fleece) and the lower side to FIBTEC XS1 (special needle-punched fibre produced according to specifications designed to provide a better impact sound insulation).

> Conditions of use

Isolmant MonoPlus is recommended for impact sound insulations with floating screed. It is also suitable for single-layer application in which the direct installation of building plants on the resilient layer requires tear resistance and protection to avoid damaging the insulating material. The product can be installed with low thickness screed (at least 5 cm).


The resilient layer is made of expanded closed-cell physically cross-linked polyethylene bonded, on the lower side, to a special needle-punched white fibre that is conceived to enhance the acoustic performance. On the upper side, it is bonded to a screen-printed anti-tearing fibre (type Isolmant MonoPlus). The product comes with adhesive overlapping flap. Thickness approx. 7 mm. Dynamic stiffness 19 MN/m3.



> ISOLMANT RADIANTE

> To be installed with the aluminate-coated side facing upwards.

THICKNESS Approx. 6 - 8 mm

IMPACT SOUND INSULATIONΔLw = 25 dB (6 mm version) Value certified according to the EN ISO 140/8ΔLw = 30 dB (8 mm version) Value calculated according to EN ISO 12354-2 and UNI/TR 11175

DYNAMIC STIFFNESSs’ = 21 MN/m3 (6 mm version)s’ = 15 MN/m3 (8 mm version)

THERMAL RESISTANCERt = 0.168 m2K/W (6 mm version)Rt = 0.254 m2K/W (8 mm version)

SIZE

Rolls of:1.50 m x 50 m (h x L) = 75 m2 (6 mm version)1.50 m x 25 m (h x L) = 37.5 m2 (6 mm version)1.50 m x 25 m (h x L) = 37.5 m2 (8 mm version)Product with overlaps. Once overlapped, the sheets should be sealed by means of Isolmant Nastro Telato or Isolmant Fascia Nastro


Product made of HD 3 mm Isolmant Special or 5 mm Isolmant withthe upper side bonded to a radiant, embossed aluminate coated film and the lower side bonded to FIBTEC XF2 (special needle-punchedfibre produced according to specifications designed to provide a better noise reduction).

> Conditions of use

Isolmant Radiante is specific for applications with underfloor heating or cooling system. Thanks to its aluminate reflective film, it can block any downward loss of heat. This product fits for low thickness screed installations with thin thermal insulation panels. An acoustic resilient layer is always required, because thermal panels do not provide acoustic insulation (except in specific cases).


Resilient layer made of 3 or 5 mm crosslinked closed-cell polyethylene foam with the upper side bonded to a radiant, embossed aluminate coated film and the lower side bonded to FIBTEC XF2 (special needle-punched fibre produced according to specifications designed to provide a better noise reduction). To be installed with the aluminate-coated side facing upwards. Product with overlaps. Thickness approx. 6 or 8 mm. Dynamic stiffness 21 MN/m3 or 15 MN/m3 respectively for 6 or 8 mm versions.



> ISOLMANT UNDERSPECIAL

Product made of 5 to 10 mm Isolmant Special with the lower side bonded to FIBTEC XF1 (special needle-punched fibre produced according to specifications conceived to provide a better noise reduction).

> Conditions of use

Isolmant UnderSpecial ensures high impact sound insulation in floating screed application. It is suitable when a higher air-born sound insulation is required. In particular, this product is recommended in double-layer application. It needs 6 cm (for Isolmant Underspecial 8 mm) or 7 cm (for Isolmant Underspecial 13 mm) screeds. Screeds with lower thickness should be reinforced by means of a suitable metal mesh or fibres. Attention must be paid in case of dry shake installation of ceramic tiles.


The resilient layer is made of expanded closed-cell physically cross-linked polyethylene. The upper side is embossed and screen-printed. The lower side is bonded to a special needle-punched fibre that is conceived to enhance the acoustic performance (Isolmant UnderSpecial). This product should be positioned with the fibre side facing down.Product with overlaps. Thickness in mm (approx. 8 or 13 mm). Dynamic stiffness MN/m3 (respectively 11 MN/m3 or 9 MN/m3 for 8 or 13 mm version).


>To be positioned with the fibre side facing down.


IMPACT SOUND INSULATION ΔLw = 34 dB (for both types) Certified value



SIZE

Rolls of:1,50 m x 25 m (h x L) = 37,5 m2 (versione 8 mm)1,50 m x 50 m (h x L) = 75 m2 (versione 8 mm)1,50 m x 25 m (h x L) = 37,5 m2 (versione 13 mm)Product with overlaps.Once overlapped, the sheets should be sealed by means of Isolmant Fascia Nastro or Isolmant Nastro Telato.



> ISOLMANT UNDERSPECIAL EVO

IMPACT SOUND INSULATION ΔLw = 24 dB (according to official test report)



SIZE

Rolls of 1 m x 20 m (h x L) = 20 m2

Once overlapped, the sheets should be sealed by means of Isolmant Nastro Telato. Isolmant UnderSpecial EVO_BV comes with adhesive overlapping flap to connect and seal the sheets.

THICKNESS 4 mm approx.


Product made of 1,5 mm High Density Isolmant with the lower side bonded to FIBTEC XF2 (special needle-punched fibre produced according to specifications conceived to provide a better noise reduction).Isolmant Underspecial EVO_BV bonded to a HDPE vapour barrier available on request (version BV).

To be positioned with the fibre side facing down.

> Conditions of use

Isolmant UnderSpecial EVO is specifically conceived to optimise the acoustic performance of floating screed made of self-levelling compound. The density and the low thickness of these screeds (no less than 3 cm) cause vibration phenomena at high frequencies and Isolmant UnderSpecial EVO is designed to avoid this effect. In addition, thanks to its top adhesive fabric, Isolmant UnderSpecial EVO provides a perfect sealing for fluid castings screed.


The resilient layer is made of HD expanded closed-cell cross-linked polyethylene bonded to a special needle-punched fibre that is conceived to enhance the acoustic performance (type Isolmant UnderSpecial EVO). This product should be positioned with the fibre side facing down. Thickness approx. 4 mm. Dynamic stiffness 55 MN/m3.



> ISOLMANT UNDERSLIM

> Conditions of use

Isolmant UnderSlim is recommended for floating flooring with reduced thickness screeds (not less than 5 cm). In fact, finishing screeds with reduced thickness show a very high risk of cracking. Thanks to its special fibre and its high density Isolmant Special layer, this product provides a high level of impact sound performance and reduced risks of cracks.


The resilient layer is made of HD expanded closed-cell physically cross-linked polyethylene (approx. 50 kg/m3). The upper side is embossed and screen-printed. Its lower side is bonded to a special needle-punched fibre that is conceived to enhance the acoustic performance (Isolmant UnderSlim). This product should be positioned with the fibre side facing down. Product with overlaps. Thickness approx. 5 mm. Dynamic stiffness 21 MN/m3.


> ISOLMANT BIPLUS



IMPACT SOUND INSULATION ΔLw = 34 dB (for both types) Certified value



SIZE

Rolls of:1.50 m x 50 m (h x L) = 75 m2 (9 mm version)1.50 m x 25 m (h x L) = 37.5 m2 (14 mm version)This product comes with a top adhesive profile to seal theoverlapping flaps


Product made of 5 mm or 10 mm Isolmant with the upper side bonded to FIBTEC XT1 (screen-printed anti-tearing fibre) and the lower side to FIBTEC XF1 (special needle-punched fibre produced according to specifications conceived to provide a better noise reduction).

> Conditions of use

Isolmant BiPlus is recommended for high impact sound insulations with floating screed. It is also suitable for single layer application in which the direct installation of building plants on the resilient layer requires tear resistance fleece to avoid damaging the insulating material. It needs at least a 6 cm (for BiPlus 9 mm) or 7 cm (for BiPlus 14 mm) screeds. Screeds with lower thickness should be reinforced by means of a suitable metal mesh or fibres. Attention must be paid in case of dry shake installation of ceramic tiles.


The resilient layer is made of expanded closed-cell physically cross-linked polyethylene with the lower side bonded to a special needle-punched fibre that is conceived to enhance the acoustic performance, and the upper side to an anti-tearing fleece (Isolmant BiPlus type). This product should be installed with the screen-printed fleece facing upwards. The product comes with adhesive overlapping flap. Density approx. 30 kg/m3. Thickness approx. 9 or 14 mm. Dynamic stiffness 11 MN/m3 or 9 MN/m3 respectively for 9 or 14 mm versions.



> ISOLMANT SUPER BIPLUS



IMPACT SOUND INSULATION ΔLw = 34 dB Value calculated according to EN ISO 12354-2 and UNI/TR 11175



COMPRESSION CLASS CP 2

SIZE

Rolls of 1,00 m x 10 m (h x L) = 10 m2

Product without overlaps. After coupled, the sheets should be sealed by means of Isolmant Nastro Telato or Isolmant Fascia Nastro.


Product made of 5 mm Isolmant with the lower side bonded to FIBTEC XF1-EL (high performance elastic needle-punched fibre) and the upper side bonded to Isolmant TeloGomma (special viscoelastic mass) which is coated with an anti-tearing TNT fleece.

> Conditions of use

Isolmant Super BiPlus ensures high levels of impact sound insulation for horizontal partitions. In particular, it is conceived for light structures as wooden flooring. It also provides a high airborne insulation. It is recommended for single or double layer floor installations. It needs a finishing screed of at least 5 cm.


The resilient layer is made of expanded closed-cell physically cross-linked polyethylene bonded, on the lower side, to an elastic needle-punched fibre that is conceived to enhance the acoustic performance and, special viscoelastic EPDM rubber which is coated with a TNT fleece (type Isolmant Super BiPlus). Thickness approx. 10 mm. This product should be positioned with the rubber side facing upwards. Dynamic stiffness 10 MN/m3.



> ISOLTILE

IsolTile is a low thickness undertile acoustic layer, designed to the acoustic refurbishment of new or existing floor. This product can bedirectly laid under ceramic or wooden flooring. IsolTile is made of HD expanded polypropylene (77 kg/m3), calendered-coated by FIBTEC XP1 on both sides. FIBTEC XP1 is non-woven, embossed, black polypropylene.



IMPACT SOUND INSULATION ΔLw = 16 dB Certified value

THERMAL CONDUCTIVITY λ = 0.037 W/mK


EQUIVALENT AIR LAYER THICKNESS Sd = 30 m

COMPRESSIVE STRENGTH

10% compressive deformation at 151 kPa25% compressive deformation at 180 kPa40% compressive deformation at 222 kPa50% compressive deformation at 274 kPa

SIZE Rolls of: 1 m x 20 m = 20 m2

PACKAGING Single rolls with accessories (sealing tape and flanking strip)

ACCESSORIES Sealing strip: h 7,5 cm x L 20 mFlanking strip: h 3 cm x L 20 m

> Conditions of useIsolTile can be installed directly on the existing flooring where acoustic bridges and flanking paths are critical in terms of compliance with the standards in force. It ensures a significant improvement of impact sound insulation with ceramic tiles and wooden flooring as well. It could be also installed on floating screed to enhance acoustic performances. IsolTile uncouples the floor covering from the substrate and neutralizes tensions between the substrate and the tile covering. Furthermore directly transfers the load impact on the tile covering to the substrate avoiding point load concentration and tile cracking. These product installation does not modify the standard procedure to lay the flooring. Isoltile does not need any special adhesive that could be selected referring to the installation surface and finishing type. For instance, IsolTile could be laid by means of C2 class tiles adhesive or bi-component epoxypolyurethane glues for wooden flooring. This product is also suitable for hot water underfloor heating. Check: Rt (finishing + Isolmant layer) ≤ 0,15 m2K/W in case of wooden flooring.

> Item specificationsIsolTile is a low thickness uncoupling membrane and an undertile resilient layer, designed to the acoustic retrofitting of new or existing floor. It is made of closed-cell physically cross-linked polypropylene foam that is calendered-coated with non-woven, embossed, screenprinted polypropylene (Isolmant IsolTile type). A removable adhesive layer is provided on the bottom side of IsolTile AD. Thickness approx. 2 mm, density approx. 77 kg/m3, thermal conductivity 0.037 W/mK, Sd = 30 m. It ensures 16 dB reduction of impact sound noise as per EN-ISO 140-8.


> ISOLMANT FIBRA HD

u ENHANCED PERFORMANCES t


DENSITY Approx. 140 kg/m3

IMPACT SOUND INSULATIONDRY SCREED

ΔLw = 22 dB Value calculated 33 mm thin system gypsum fibre board 23 mm (28 kg/m2), 10 mm Isolmant Fibra HD, standard concrete slab

IMPACT SOUND INSULATIONPOURED SCREED

ΔLw = 27 dB Value calculated according to UNI EN ISO 12354-2 and UNI/TR 11175

EFFECTIVE DYNAMIC s’ = 13 MN/m3




SPECIFIC HEAT CAPACITY cP = 1200 J/kgK

VAPOUR RESISTANCE μ = 3

SIZE Panels of 1.00 m x 1.20 m = 1.20 m2

PACKAGING Packs 15 panels (equal to 18 m2)

Acoustic resilient panel, made of HD (140 kg/m3) FIBTEC PHD, 70% recycled post-consumer material suitable for impact sound insulation especially with dry screed system. Non-toxic, ecological,with unlimited duration. Isolmant Fibra HD provides credits for green buildings certifications according to LEED or ITACA rating systems.

> Conditions of useIsolmant Fibra HD is suitable for impact sound insulation. In particular, it is recommended for creating dry floating screed made of gypsum fibre boards, fibre cement or wood base panels. Its thin thickness allows the installation of systems with reduced height. If used for standard screed, made of sand and cement (minimum 5 cm thickness), a protective PE film should be laid before installation. The screed should ensure adequate mechanical resistance depending on the effective load and laying conditions (specifications given by screed supplier).

> Item specificationsResilient panels made of HD polyester fibre FIBTEC PHD (140 kg/m3), with high acoustic and thermal characteristics. Product made of 70% recycled fibre from post-consumer material. Non-toxic, ecological, with unlimited duration. Dynamic stiffness: s’ = 13 MN/m3 according to UNI EN 29052-1. Panel thermal resistance: Rt = 0.313 m2K/W. Approx. 1.00 x 1.20 m panels.




> ISOLMANT D311




SPECIFIC HEAT CAPACITY c = 2100 J/kgK



UNDER LOAD DEFLECTION 4.6% at 2 kPa


IMPACT SOUND INSULATION ΔLw = 26 dB Value calculated according to UNI EN ISO 12354 and UNI/TR 11175


SIZEPanels of 1.0 m x 1.5 m = 1.5 m2

Once laid close, the panels should be sealed by means of Isolmant Nastro Telato or Isolmant Fascia Nastro

PACKAGING Packs of 15 panels (equal to 22.5 m2)

Product made of a double-layer Isolmant with the upper side bonded to a high resistance aluminate embossed anti-tearing film. To be installed with the aluminate-coated side facing upwards

> Conditions of use

Isolmant D311 is recommended for under screed installation in single layer applications. Its application ensures highlevels of thermal and impact sound insulation of the partition floor. It needs a finishing screed of at least 7 cm. The screed should be suitably reinforced or reinforced by means of a suitable fibre. It is also raccomanded for acoustic and thermal isolation on pilotis floor.


The resilient layer is made of expanded closed-cell cross-linked polyethylene bonded to an embossed aluminatecoatedanti-tearing film (Isolmant D311 type). This product should be installed with the aluminate-coated side facing upwards. Density approx. 30 kg/m3. Thickness approx. 22 mm. Dynamic stiffness 37 MN/m3.


> ISOLMANT FASCIA PERIMETRALE STACCA/ATTACCA


FLANKING PATH NOISE REDUCTIONThe non-use of Isolmant Fascia Perimetrale causes an acousticbridge and a consequent decibel loss

INSTALLATION

• Use this adhesive side to connect the strips to wall, floor orinsulating layer

• Trim the extra length only after laying and grouting tile flooringand before installing the skirting boards

SIZE Strips of 15 cm x 100 m

PACKAGING 10 rolls equal to 1000 m

15 cm height adhesive strips made of 3 mm expanded closed-cell cross-linked polyethylene with reusable adhesive side.


> Conditions of use

Isolmant Fascia Perimetrale avoids flanking noise and vibration transmission from floating screed to the partitionwall. To ensure the proper functioning of the floating floor it is necessary that the whole system resting on the resilient layer can move freely. Flanking strips avoid any rigid contacts between screed and walls, pillars and façades. It can substitute the elastic material used for expansion joints.


Adhesive strip for the perimeter acoustic insulation made of expanded closed-cell cross-linked polyethylene with approx. 30 density kg/m3. Height 15 cm. It is provided in boxes of 10 elements of 100 m each. Thickness approx. 3 mm.


> ISOLMANT FASCIA PERIMETRALE TECNICA RETICOLATA



INSTALLATION

• After removing the protection film of the adhesive side, IsolmantFascia Perimetrale can be installed on the floor (or the resilient layer already positioned) and then to the wall

• The extra length could be trimmed with “snap-off blade” utilityknife after completing flooring installation and finishing

SIZE 18.5 - 25 cm x 50 m strips

PACKAGING Version h 18.5 cm: 8 rolls equal to 400 mVersion h 25 cm: 6 rolls equal to 300 m

Expanded cross-linked closed-cell polyethylene strips designed foreasy installation. These strips come with a screen-printed side withthe installation instructions.This product is available in three versions:- h 18.5 cm (11 cm wall + 7.5 cm floor);- h 25 cm (17.5 cm wall + 7.5 cm floor).

> Conditions of use

Isolmant Fascia Perimetrale avoids flanking noise and vibration transmission from floating screed to the partition wall. To ensure the proper functioning of the floating floor it is necessary that the whole system resting on the resilient layer can move freely. Flanking strips avoid any rigid contacts between screed and walls, pillars and façades. In addition, as an alternative to turn up and bend the resilient layer along the edges of the floating screed (which is sometimes difficult during installation), it is possible to apply Isolmant flanking strips along the room perimeter. It can substitute the elastic material used for expansion joints. Designed for easy installation, this flanking strip ensures an high-level of acoustic performance.


Perimeter flanking strip made of expanded closed-cell cross-linked polyethylene with approx. 30 density kg/m3. This product is designed for easy installation. These strips come with a screen-printed side with installation instructions (Isolmant Fascia Perimetrale Tecnica Reticoalta type). Height 18.5 cm or 25 cm, pack of 8 or 6 rolls of 50 m/each. Thickness approx. 5 mm.



> ISOLMANT FASCIA PERIMETRALE TECNICA RADIANTE

THICKNESS 8 mm

FLANKING PATH NOISE REDUCTIONThe non-use of Isolmant Fascia Perimetrale Radiante causes, athermal and acoustic bridge which can affect the acoustic andthermal performances of the radiant panels system

INSTALLATION

• Use the replaceable adhesive side to connect the flanking strip tothe wall• The strip should be very well connected to the acoustic resilientlayer• Use the heating pipes to fix the polyethylene layer, which extendsfrom the strip, to the thermal panel• Lay the thermal panel on the strip avoiding any physical gap inwhich any concrete material could end• Trim the extra length only after laying and grouting the tiles andbefore installing the skirting boards

SIZE Strips of 15 cm x 25 m


Vertical flankinf strips made of expanded closed-cell cross-linked polyethylene with 15 cm height designed for easy installation in case of underfloor heating and cooling systems. These strips have a reusable adhesive flap to overlap the castellated panel. In addition, the strips are screen-printed with installation instructions. The product should be used when Isolmant Radiante is istalled as a resilient layer below a screed.

> Conditions of use

Isolmant Fascia Perimetrale Radiante avoids flanking noise and vibration transmission from floating screed to the partition wall. The product is designed for easy installation in case of underfloor heating and cooling systems. To ensure the proper functioning of the floating floor it is necessary that the whole system resting on the resilient layer could move freely. Flanking strips avoid any rigid contacts between the screed and walls, pillars and façades. In case of underfloor heating systems, Isolmant Fascia Perimetrale Radiante can be used as expansion joint and thermal break.


Fascia Perimetrale Radiante is a flanking strip for the acoustic and thermal insulation of screed in case of underfloor heating and cooling systems. The strip is made of expanded closed-cell cross-linked polyethylene with approx. 30 kg/m3 density. The product comes with a polyethylene flap to overlap the castellated underfloor insulation panels. Height 15 cm. It is provided in boxes with 10 elements of 25 m each. Thickness approx. 8 mm.



THICKNESS Approx. 5 mm (vertical part) - approx. 0.1 mm (horizontal part)


INSTALLATION

Isolmant Fascia Perimetrale Tecnica doppio spessore is suitable for installation over the resilient layer due to its silicone adhesive paper film on the bottom sides. Trim the extra length only after laying and grouting tiles and before installing the skirting boards.

SIZE 28 cm x 50 m strips


> Conditions of useIsolmant Fascia Perimetrale avoids flanking noise and vibration transmission from floating screed to the partition wall. To ensure the proper functioning of the floating floor it is necessary that the whole system resting on the resilient layer can move freely. Flanking strips avoid any rigid contacts between screed and walls, pillars and façades. In addition, as an alternative to turn up and bend the resilient layer along the edges of the floating screed (which is sometimes difficult during installation), it is possible to apply Isolmant flanking strips along the room perimeter. It can substitute the elastic material used for expansion joints. Designed for easy installation, this flanking strip ensures an high-level of acoustic performance.


Adhesive double thickness perimeter strips designed for easy installation, which consist of a vertical side made of expanded cross-linked polyethylene with 5 mm thickness. This side is partially adhesive and it is conceived to be installed on the wall. The horizontal part is made of an HDPE film with 0.1 mm thickness and silicone adhesive paper on the lower sides for installation over the resilient layer (Isolmant Fascia Perimetrale Tecnica Doppio Spessore type). Height 28 cm high strips packed in 4 rolls box of 200 m each.

> ISOLMANT FASCIA PERIMETRALE TECNICA DOPPIO SPESSORE

Adhesive perimeter strips designed for an easy installation. They have a vertical part made of expanded cross-linked polyethylene with 5 mm thickness. This side is partially adhesive and it is conceived to be installed on the wall. The horizontal part is made of an HDPE film with 0.1 mm thickness and silicone adhesive paper on one sides. These strips come with a screen-printed side with installation instructions. This product is available: h 28 cm (18 cm wall + 10 cm floor);



> ISOLMANT FASCIA PERIMETRALE 6.E

Flanking strips made of 6 mm Isolmant Strong (high density 70 kg/m3 expanded closed-cell physically crosslinked polyethylene) available in two version:- adhesive with tree different high 10, 15 and 30 cm- not adhesive with tree different high 10, 15 and 30 cm



SIZE

strips h 10 cm by 50 m in lengthstrips h 15 cm by 50 m in lengthstrips h 30 cm by 50 m in length(not adhesive and adhesive version)

PACKAGING

h 10 cm 15 strips = 750 m (1 roll)h 15 cm 10 strips = 500 m (1 roll)h 30 cm 5 strips = 250 m (1 roll)minimum amount: at least 2 rolls of adhesiveproduct (different strip high can be chosen)

FLANKINGPATH NOISEREDUCTION

The acoustic efficiency of floating floor with air cavity will be adversely affected if acoustic bridging between the floating layer and the surrounding structure should occur. When installed around the floor perimeter eliminates acoustic flanking with the wall and the treatments.

INSTALLATION

- Use adhesive or metal staplers to attach the strips to the wall and to plinth base structures;- Strips must be placed in the joint between the screed (wet or dry laid) and the surrounding walls, trapped to the wall;- Before pouring concrete screes, seal the joint between the flanking strip and the Isolmant sheetwith Isolmant Nastro Telato;- Cut off the excess part only after laying the flooring, before applying the baseboard.

> Conditions of use

Flankin strips are essential when to prevent vibration transmission from floating floor to the partition wall or plinth base structures. It is particularly recommended with floating floor with air cavity.


Flanking strips made of 6 mm high density (70 kg/m3) expanded closed-cell physically cross-linked polyethylene. Available in adhesive and not adhesive versions with tree different high 10, 15 and 30 cm.



> ISOLMANT FASCIA PERIMETRALE 10.E

Flanking strips made of 10 mm high quality expanded closed-cell cross-linked polyethylene available in two version:- adhesive with four different high 10, 15, 20 and 30 cm- not adhesive with four different high 10, 15, 20 and 30 cm


SIZE

strips h 10 cm by 60 m in lengthstrips h 15 cm by 60 m in lengthstrips h 20 cm by 60 m in lengthstrips h 30 cm by 60 m in length(not adhesive and adhesive version)

PACKAGING

h 10 cm 12 strips = 720 m (1 roll)h 15 cm 8 strips = 480 m (1 roll)h 20 cm 6 strips = 360 m (1 roll)h 30 cm 4 strips = 240 m (1 roll)minimum amount: at least 2 rolls of adhesiveproduct (different strip high can be chosen)

FLANKING PATH NOISE REDUCTION

The acoustic efficiency of floating floor with air cavity will be adversely affected if acoustic bridging between the floating layer and the surrounding structure should occur. When installed around the floor perimeter eliminates acoustic flanking with the wall and the treatments.

INSTALLATION

- Use adhesive or metal staplers to attach the strips to the wall and to plinth base structures;- Strips must be placed in the joint between the screed (wet or dry laid) and the surrounding walls, trapped to the wall;- Before pouring concrete screes, seal the joint between the flanking strip and the Isolmant sheetwith Isolmant Nastro Telato;- Cut off the excess part only after laying the flooring, before applying the baseboard.

> Conditions of use

Flankin strips are essential when to prevent vibration transmission from floating floor to the partition wall or plinth base structures. It is particularly recommended with floating floor with air cavity.


Flanking strips made of 10 mm expanded closedcell cross-linked polyethylene (30 kg/m3). Available in adhesive and not adhesive versions with four different high 10, 15, 20 and 30 cm.


> ISOLMANT FASCIA NASTRO

Adhesive strip made of 7.5 cm high Isolmant, suitable for sealing together the sheets of Isolmant.

> Conditions of use

Ideal for sealing together the sheets of resilient under screed material (especially if they have no adhesive overlapping flaps), thus preventing the passage of noise and humidity. Isolmant Fascia Nastro ensures the continuity of the resilient materirial: all openings and joints should be suitably sealed to prevent screed material escaping expecailly in case of self-compacting free flowing floor screed. It can be also useful to repair the insulating layer in case of damages.


Adhesive sealing strip made of expanded closed-cell cross-linked polyethylene (approx. 30 kg/m3) provided in rolls of7.5 cm height. Thickness approx. 3 mm.



IMPACT SOUND INSULATIONThe non-use of Isolmant Fascia Nastro causes a decibel loss thatoccurs when the Isolmant sheets are not properly sealed

INSTALLATION Install Isolmant Fascia Nastro after trimming it using a cutter

SIZE Strips of 7.5 cm x 50 m



IMPACT SOUND INSULATION > STAIRCASE INSULATION

> ISOLMANT KIT SCALE


INSTALLATION

Check the surface that should be planar and moisturise the stair-case concrete before laying the adhesive. - Cut Isoltile sheets and install them by means of the C2 class adhesive. Isolmant IsolTile should be installed also on the landings between a flight of steps and the following one. - Once installed Isolmant IsolTile, seal the sheets that have been laid on each step by means of the IsolTile strip. - Install Isolmant Isoltile lateral strip on the vertical partition to disconnect the step and the staircase wall. - By means of Isoltile sealing tape seal the connection line betwe-en Isoltile lateral strip and Isolmant IsolTile that is installed on the step and on the landing. Lay the mortar bed on the IsolTile sheet installed on step and landing. - Install the marble tile by means of mortar or adhesive. Cut the extra length of IsolTile lateral strip after installing the flooring. - Then lay the skirting boards sealing the clearance between the base and the marble.

SIZE

Isolmant IsolTile treads sheet: h 33 for 125 cmIsolmant IsolTile risers sheet: h 20 for 125 cmIsolmant IsolTile landing sheet: h 50 for 125 cmIsolmant IsolTile sealing tape: h 7.5 cm for 20 mIsolmant IsolTile lateral strip: h 18.5 cm per 25 mIsolmant Fascia Tagliabattiscopa: h 3 cm per 15 m

PACKAGING

Note: one Kit to insulate a standard stair-case (two half-stairs and one landing).

Isolmant IsolTile treads sheet: 22 elementsIsolmant IsolTile risers sheet: 22 elementsIsolmant IsolTile landing sheet: 4 elementsIsolmant IsolTile sealing tape: 5 elementsIsolmant IsolTile lateral strip: 1 elementIsolmant Fascia Tagliabattiscopa: 2 element

IsolTile is a low thickness uncoupling membrane and an undertile resilient layer, designed to the acoustic retrofitting of new or existing floor. it is made of HD expanded polypropylene which is calendered-coated by FIBTEC XP1 on both sides. FIBTEC-XP1 is non-woven, embossed, screen-printed black polypropylene fibre, designed for the acoustic insulation of finishings. Isolmant Kit Scale comes with standards shapes sheets of IsolTile that could be cut according to the actual size of treads and risers and stairs landings. This kit includes all the necessary accessories as adhesive tape to seal the sheet and flanking strips for disconnecting wall and stairs both fundamental to perform the acoustic insulation of stairs.


> ISOLMANT POLIMURO

AIRBORNE SOUND INSULATION > CAVITY WALL INSULATION



Rw = 54 dB Value certifiedCavity wall with 8 cm hollow brick and 12 cm poroton block (3 plasters)

Rw = 54 dB Value certifiedCavity wall with 12 cm hollow brick and 12 cm poroton block (2 plasters)


VAPOUR RESISTANCE μ = 3600 (this value refers to the polyethylene layer)



SIZE

Rolls of 1.50 m x 25 m (h x L) = 37.5 m2 (Isolmant Polimuro ristrutturazione version)

Rolls of 1.50 m x 50 m (h x L) = 75 m2

Product with overlaps


Product made of 5 mm Isolmant with both sides bonded to FIBTECXF3 (special needle-punched fibre produced according to the specifications designed to provide a better noise reduction).

> Conditions of use

Isolmant Polimuro is recommended for small cavities insulation (2 to 4 cm air gap). Soundproofing product that enhances airborne sound insulation (internal anti-vibration element) and acts as a sound absorber of cavity resonan-ce. Isolmant Polimuro should be fixed to the wall by means of nylon mechanical fasteners or by means of by a nailed wooden batten on the top. Install Isolmant Polimuro by using the overlaps to get a uninterrupted layer, thus, it is pos-sible to achieve a perfect acoustic insulation.


Isolmant Polimuro is an unfaced roll made of expanded reticulated closed-cell polyethylene with both sides bonded to a needle-punched fibre that is conceived to enhance the acoustic performance (Isolmant Polimuro type). Product with overlaps. Density approx. 30 kg/m3. Thickness approx. 12 mm.


> ISOLMANT PERFETTO TR


THICKNESSApprox. 30 - 50 mm (stored)Upon request (at least 500 m2 and within 20 working days in advance),it is alsopossible to have products with no standard thickness and height

AIRBORNE SOUND INSULATIONRw = 58 dB Value certifiedCavity wall with 8 cm and 12 cm Poroton blocks (3 plasters) and Isolmant Perfetto TR of 50 mm in the air gap


THERMAL RESISTANCE Rt = 0.858 m2K/W (30 mm version)Rt = 1.429 m2K/W (50 mm version)


VAPOUR RESISTANCE μ = approx. 2

EQUIVALENT AIR LAYER THICKNESS Sd = 0.06 - 0.10 m (30 and 50 mm versions respectively)

REACTION TO FIRE Euroclass B-s2,d0

SIZEPanels of 1.00 m x 2.85 m = 2.85 m2

Upon request (at least 500 m2 and within 20 working days in advance), it is also possible to have products with no standard thickness and height

PACKAGING Packs of 10 - 7 panels (equal to 28.5 - 19.95 m2 each pack)for 30 - 50 mm versions respectively

Insulating panel made of IsolFIBTEC PFT (recycled fibre of polyester for technical application with increasing density along the thickness). This fibre has high thermal and acoustic performance. Non-toxic, ecological, with unlimited duration. Full height panel for an easy installation. B-s2, d0 reaction to fire performance.Isolmant Perfetto TR provides credits for green buildings certifications according to LEED or ITACA rating systems.

> Conditions of use

Isolmant Perfetto TR is a versatile product. It is recommended for acoustic and thermal insulation cavity wall both perimeter partition and between different dwelling units. Isolmant Perfetto TR can be dry laid between the two leaf wall (if necessary it can be glued or screwed). No sealing is required between panels.


Insulating layer made of big-size panels (1.00 x 2.85 m). The panels are made of recycled fibre of polyester for technical application whose density increase along the thickness. These panels provide a high sound and thermal insulation (type Isolmant Perfetto TR). Thickness 30 o 50 mm. Panel thermal resistance equal to 0.858 - 1.429 m2K/W for 30 and 50 mm versions respectively. B-s2, d0 reaction to fire performance.


> ISOLMANT PERFETTO SPECIAL


> To be positioned with the screen-printed side (logo Isolmant) invisible position and facing the heated room.

THICKNESS Approx. 30 - 50 mm (stored)

AIRBORNE SOUND INSULATIONRw = 54 dB Value certifiedCavity wall with 8 cm and 12 cm hollow bricks (3 plasters) and Isolmant Perfetto Specail of 30 mm in the air gap.

THERMAL CONDUCTIVITY λ = 0.035 W/mK (this value refers to the IsolFIBTEC PFT panel)λ = 0.035 W/mK (this value refers to Isolmant layer)


SPECIFIC HEAT CAPACITY c = 1200 J/kgK (30 mm version)c = 1200 J/kgK (50 mm version)

VAPOUR RESISTANCE μ = 3600 (this value refers to Isolmant Layer)μ = 2 approx. (this value refers to IsolFIBTEC PFT panel)



PACKAGING Packs of 10 - 7 panels (equal to 28.5 - 19.95 m2 each pack)for 30 - 50 mm versions respectively

Insulating panel made of IsolFIBTEC PFT (recycled fibre of polyester for technical application with increasing density along the thickness) bonded to 5 mm Isolmant Special. This fibre has high thermal and acoustic performance, non-toxic, ecological, with unlimited duration. Full height panel for an easy installation. This product comes with overlaps. Isolmant Perfetto BV provides credits for green buildings certifications according to LEED or ITACA rating systems.

> Conditions of use

Isolmant Perfetto Special is a versatile product. It is recommended for acoustic and thermal insulation of cavity wall both perimeter walls and partitions between different dwelling units. Isolmant Perfetto Special can be dry laid between the two leaf wall (if necessary it can be glued or screwed).


Insulating layer made of big-size panels (1.00 x 2.85 m). The panels are made of recycled polyester fibre with increasing density along the thickness bonded to a layer of expanded closed-cell physically cross-linked polyethylene. This product provides a high airborne and thermal insulation (Isolmant Perfetto Special type). Full height panel for an easy installation. The product comes with overlaps. Thickness 30 o 50 mm approx. Panel thermal resistance equal to 0.857 m2K/W or 1.429 m2K/W for 30 and 50 mm versions respectively.


> ISOLMANT FIBRA LC


LCF I B R A

THICKNESS Approx. 40 - 60 - 80 mm


THERMAL RESISTANCERt = 1.026 m2K/W (40 mm version)Rt = 1.538 m2K/W (60 mm version)Rt = 2.052 m2K/W (80 mm version)



EQUIVALENT AIR LAYER THICKNESS Sd = 0.08 - 0.12 - 0.16 m (respectively for 40 - 60 - 80 mm versions)

AIRBORNE SOUND INSULATION Rw> 50 dBCavity wall made of standard bricks without evident acoustic bridges

REACTION TO FIRE Class 1


PACKAGING Packs of 30 - 20 - 15 panels (equal to 27 - 18 - 13,5 m2 each pack)for 40 - 60 - 80 mm versions respectively

Insulating panel made of IsolFIBTEC FLC fibre (recycled and thermo-bonded fibre of polyester for technical application). These panels provide high sound and thermal performances/insulation.Non-toxic, ecological, with unlimited duration.Isolmant Fibra LC provides credits for green buildings certifications according to LEED or ITACA rating systems.

> Conditions of use

Isolmant Fibra LC is a versatile product. It is recommended for acoustic and thermal insulation of masonry cavity wall or drywall that are perimeter partition and between different dwelling units. Isolmant Fibra LC is conceived for applications inside cavity walls that are made of standard blocks and without evident acoustic bridges, to provide a better airborne sound insulation (higher than 50 dB).


Insulating panel (0.6 x 1.50 m) made of recycled and thermo-bonded fibre of polyester. Reaction to fire class 1.Thickness ... mm (40 - 60 - 80 mm).


> ISOLMANT FASCIA TAGLIAMURO STANDARD/STRONG


THICKNESS Approx. 4 mm (Standard version)Approx. 6 mm (Strong version)

FLANKING PATH NOISE REDUCTION Enhance the impact sound insulation of the wall reducion flanking transmission

MECHANICAL FEATURES

Standard 50 kg/m3 Strong 70 kg/m3

TENSILE STRENGTH:Longitudinal: 675 kPa 835 kPaCross: 465 kPa 735 kPaCOMPRESSIVE STRENGTH:10% compression: 30 kPa 85 kPa25% compression: 55 kPa 115 kPa50% compression: 125 kPa 185 kPaCOMPRESSION SET:0,5 h. after discharge 16% 8%25h. after discharge 7% 3%22h. load, 23°C, compression at 25%

SIZE 10 - 15 - 30 cm x 50 m strips

PACKAGINGVersion h 10 cm: 15 rolls equal to 750 mVersion h 15 cm: 10 rolls equal to 500 mVersion h 30 cm: 5 rolls equal to 250 m

10/15/30 cm underwall bearing strips made of HD Isolmant for the acoustic insulation of hollow brick masonry. This product is available as Standard (density approx. 50 kg/m3, suitable for light hollow brick masonry) and Strong version (density approx. 70 kg/m3

suitable for heavy hollow brick masonry).

> Conditions of use

Isolmant Fascia Tagliamuro is recommended to disconnect the vertical partitions, including the internal partition of the perimeter wall to avoid rigid connections between the building elements. Thanks to its balanced density, Isolmant Fascia Tagliamuro ensures the right mechanical strength (to avoid the cracking of partitions) and the anti-vibrations isolation, which is necessary to avoid acoustic bridges.


HD expanded closed-cell physically cross-linked polyethylene strips (Standard approx. 50 kg/m3 or Strong approx. 70 kg/ m3) for the acoustic insulation of brick masonry with height 10/15/30 cm based to the masonry thickness. 4 mm (Standard) or 6 mm thickness (Strong).


> ISOLMANT PERFETTO CG

AIRBORNE SOUND INSULATION > FALSE WALL INSULATION

THICKNESSApprox. 25 - 45 mmUpon request (at least 500 m2 and within 20 working days in advance), it is also possible to have products with no standard thickness and height

AIRBORNE SOUND INSULATIONRw = 55 dB Value certifiedFalse wall with 8 cm hollow brick and metal structure, double plaster boardand 45 cm Perfetto CG in the cavity





EQUIVALENT AIR LAYER THICKNESS Sd = 0.05 - 0.09 m (25 and 45 mm versions respectively)

REACTION TO FIRE Euroclass B-s2,d0


PACKAGING Packs of 30 - 20 panels (equal to 18 - 12 m2 each pack)for 25 - 45 mm versions respectively

Insulating panel made of IsolFIBTEC PFT fibre (recycled fibre of polyester for technical application with increasing density along the thickness). These panels provide a high sound and thermal insulation. Non-toxic, ecological, with unlimited duration.Isolmant Perfetto CG provides credits for green building certifications according to LEED or ITACA rating systems.

> Conditions of use

Isolmant Perfetto CG is a versatile product. It is recommended for acoustic and thermal insulation of light partition, drywall, false ceiling and wall. It should be installed into stud spacing and it is suitable to fill partition cavity. Isolmant Perfetto CG provides the partition with a high airborne insulation and a low thermal transmittance.


Insulating panels (0.6 x 1.00 m) made of recycled fibre of polyester for technical application whose density increase along the thickness. This product provides a high airborne insulation performance and thermal resistance as well. (Isolmant Perfetto CG type). Thickness approx. 25 or 45 mm). Panel thermal resistance equal to respectively 0.658 - 1.184 m2K/W for 25 and 45 mm versions.


> ISOLMANT NASTRO ORDITURA CARTONGESSO

AIRBORNE SOUND INSULATION > FALSE WALL INSULATION

THICKNESS Approx. 3.5 mm


In the event that Isolmant Nastro Orditura Cartongesso is not used a decibel loss could be caused by rigid connections between metal frame and adjoining building elements (wall and floor) and by acoustic bridges between metal frame and plasterboard panels

INSTALLATION The size of Isolmant Nastro Orditura Cartongesso should beselected according to the web and flange depth size

SIZE

Length 30 m / width 30 - 50 - 70 - 95 mm (single adhesive sideversion)

Length 20 m / width 30 - 50 - 75 - 100 mm (double adhesive sideversion)

PACKAGING 30 - 18 - 12 - 10 rolls each paper box (single adhesive)20 - 12 - 8 - 6 rolls each paper box (double adhesive)

Expanded cross-linked polyethylene strip to disconnect the metal structure of the drywall. This accessory is available as single adhesive side (width 30 - 50 - 70 and 95 mm) and double adhesive as well (width 30 - 50 - 75 and 100 mm).

> Conditions of use

This product is suitable for disconnecting the metal structure of drywall or false wall from adjoining building elements (wall and floor) and to reduce the acoustic bridge between metal frame and plasterboard panels. The strips should be joined to webs and flanges of studs and runners.


Expanded cross-linked polyethylene strip to disconnect the metal structure of drywalls. Width approx. 30 - 50 - 70 and 95 mm for the single adhesive version and width approx. 30 - 50 - 75 and 100 mm for the double adhesive version. Thickness 3.5 mm. Density approx. 30 kg/m3.


> ISOLMANT TELOGOMMA CASSONETTI

OUTDOOR SOUND INSULATION > ROLLING SHUTTER BOX INSULATION


AIRBORNE SOUND INSULATION Rw = 26.5 dB Certified valueWindow test on the TeloGomma and Isolmant

SIZE Rolls of 1 m x 10 m = 10 m2

PACKAGING 6 rolls pallet (equal to 60 m2)

Product made of Isolmant Telogomma with the lower side bonded to 3 mm Isolmant ant the upper side to 5 mm polyurethane for sound absorption. The product has one side with adhesive.

> Conditions of use

Isolmant Telogomma Cassonetti is a visco-elastic mass product (special blend of EPDM rubber with mineral fillers) with airborne sound insulation and sound absorbing characteristics. Due to the mass of Telogomma, the airborne sound insulation increases, while the sound absorbing polyurethane improves the acoustic absorption and Isolmant acts as a sound dampening element. These characteristics make Isolmant Telogomma Cassonetti suitable for isolating windowshutter boxes. The sheets should be also fixed mechanically to ensure a long-term resistance as the adhesive side is designed only for installation.


Insulating material made a visco-elastic mass (special blend of EPDM rubber with mineral filler) with the lower side bonded to 3 mm layer of expanded physically cross-linked polyethylene and the upper side to to a 5 mm polyurethane. Total thickness approx. 10 mm. The product has one side with adhesive.


> ISOLMANT TELOGOMMA TUBI


AIRBORNE SOUND INSULATION Rw= 29 dB Certified valueNormal incidence sound transmission loss test with Telogomma of 4 kg/m2



SIZE Rolls of 1 m x 3 m (h x L) = 3 m2

On request it is available with pre-cut every 20 cm


Flexible noise barrier made of special Isolmant Telogomma bonded to 10 mm closed-cell expanded rubber combined with elastic polio-lefinas. Product with one adhesive side.

>To be positioned with the rubber side facing upwards.

> Condition of use

Isolmant Telogomma Tubi is wrapped around the outside of duct or pipe to reduce the radiated noise. Provides high performances as anti-vibration and anti-condensation system for the acoustic insualtion of ductwork or piping as air or other contents move through it. Thanks to its conformability and to the adhesive side the product can be easily applied on non-planar surfaces. It is used to wrap noisy pipes, ducts, valves and fan housings.

Item specifications

Noise barrier made visco-elastic mass (special blend of EPDM rubber with mineral fillers) bonded to 10 mm closed-cell expanded rubber combined with elastic poliolefinas. Product with one adhesive side. Total thickness approx. 12 mm.

EQUIPMENTS NOISE INSULATION > INSTALLATIONS NOISE INSULATION


VISCO-ELASTIC MASS

> ISOLMANT TELOGOMMA

THICKNESS Approx. 2 mmApprox. 2.5 mm

WEIGHT Approx. 4 kg/m2 (2 mm version)Approx. 5 kg/m2 (2.5 mm version)


Rw= 29 dB Certified value (4kg/m2 version)Normal incidence sound transmission loss test with rubber of 4 kg/m2

Rw = 31 dB Certified value (5kg/m2 version)Normal incidence sound transmission loss test of Telogomma 5 kg/m2

VAPOUR RESISTANCE μ = approx. 7000



Visco-elastic mass made of a special blend of EPDM rubber with mineral fillers (surface density 4 kg/m2 or 5 kg/m2). This acoustic membrane is coated on both sides with non-sticky non-woven fabric. Isolmant Telogomma is recommended for the airborne sound insulation and vibration isolation of drywalls, masonry walls, plates, fibreglass, plastics and plywood. Upon request, it is possible to have this product with one adhesive side.

> Conditions of use

Isolmant telogomma is a visco-elastic mass suitable for increasing the acoustic insulation of drywall, and as noise barrier for the airborne sound insulation of plate roofs and, in general, as damping product for mechanical elements. This flexible membrane can be used also on non-planar surfaces and it can be die cut and trimmed.


Acoustic Insulating material made of EPDM polymer-based, mineral fillers, free bitumen and non-halogen rubber with 2 mm thickness and surface density of 4 kg/m2 (or 2.5 mm thickness and density 5 kg/m2) coated on both sides with non-sticky non-woven fabric (Isolmant Telogomma type). Normal incidence sound transmission loss Rw= 29 dB for version 4 kg/m2 or Rw = 31 dB for 5 kg/m2 version.


VISCO-ELASTIC MASS

> ISOLMANT TELOGOMMA E+45


WEIGHT 4 kg/m2

AIRBORNE SOUND INSULATION Rw = 29 dB Certified valueNormal incidence sound transmission loss test with rubber of 4 kg/m2

IMPACT SOUND INSULATION ΔLw= 24 dB Certified value


PACKAGING Single roll

Product made of Isolmant Telogomma (visco-elastic mass approx. 4 kg/m2) with both sides bonded to Isolmant 3 mm.Suitable for increasing sound insulation and vibration isolation of wood structural floor.

> Conditions of use

Isolmant TeloGomma E+45 can increase the airborne and impact sound insulation of wood structural floor. This flexible visco-elastic mass can be use on non-planar surfaces to wrap noisy pipes, air ducts, valves and fan housings.


Acoustic Insulating material made of EPDM polymer-based, mineral fillers, free bitumen and non-halogen rubber with 2 mm thickness and surface density of 4 kg/m2 with both sides bonded to 3 mm layer of expanded cross-linked polyethylene (Isolmant TeloGomma E+45 type). Total thickness approx. 8 mm.


VISCO-ELASTIC MASS

> ISOLMANT TELOGOMMA TT

THICKNESS Approx. 5.5 mm

WEIGHT Approx. 5 kg/m2

IMPACT SOUND INSULATION ΔLw= 26.5 dB Certified value


AIRBORNE SOUND INSULATION Rw = 26.5 dB Certified value(Window test)



Product made of Isolmant Telogomma (5 kg/m2 surface density) with the lower side bonded to 3 mm Isolmant and the upper side coated with non-sticky non-woven fabric. The product is recommended for the airborne sound insulation and vibration isolation of light weight floor or wall. Upon request, it is possible to have this product with one adhesive side.To be installed with the rubber side facing upwards (or visible in wall applications).

> Conditions of use

Isolmant Telogomma TT is highly recommended as under screed sound-damping element in case of heavy loads (like industrial equipment or bathrooms, lift shafts, thermal equipment room etc..). It is also suitable to disconnect plasterboard panels in case of dry or false wall with metal structure. Suitable also for shower trays insualtion.


Visco-elastic mass made of a special blend of EPDM rubber with mineral fillers (free bitumen and non-halogen rubber with 2.5 mm thicknes) with the lower side bonded to 3 mm Isolmant and the upper side coated with non-sticky non-woven fabric (Isolmant Telogomma TT type). Total thickness approx. 5.5 mm. 5 kg/m2 surface density. Dynamic stiffness 58 MN/m3.


SPECIAL PRODUCTS

> ISOLMANT CEMENTO ARMATO




EQUIVALENT AIR LAYER THICKNESS Sd = 18 - 36 m (5 and 10 mm versions respectively)

INSTALLATION

Isolmant Cemento Armato has an adhesive side that makes this product suitable to coat reinforced concrete structures as stair-cases, lift-shafts and pillars. After wrapping the aforementioned structures, it is recommended to install hollow tiles with plasterfinish of at least 4 cm or alternatively install the suitable mesh(Nervometal type) to fix the plaster.

SIZE 1.50 m x 100 m (h x L) = 150 m2 (5 mm version)1.20 m x 60 m (h x L) = 72 m2 (10 mm version)


Isolmant with an adhesive side. Its closed-cell structure provides high and long-term acoustic and thermal insulation performances.

> Conditions of use

Isolmant Cemento Armato is suitable to insulate vertical reinforced concrete structures, in particular to carry out thevibration isolation of structures such as staircases, lift shafts, pillars. The sheets should be also fixed mechanically to ensure a long-term resistance as the adhesive side is designed only to position the material.


Expanded cross-linked closed cell polyethylene with an adhesive side (Isolmant Cemento Armato type). Density 30 kg/m3. Thickness appro. 5 or 10 mm.


SPECIAL PRODUCTS

> ISOLMANT DAMP

THICKNESS Approx. 5 - 10 - 20 mm



COMPRESSIVE STRENGTH Compressive deformation: 5% with 50 kPa, 10% with 100 kPa

SIZERolls of 1 m x 10 m = 10 m2 (5 mm version)Panels of 1 m x 1.20 m = 1.20 m2 (10 mm version)Panels of 1 m x 1.20 m = 1.20 m2 (20 mm version)

PACKAGINGSingle rolls equal to 15 - 10 m2 (for 5 mm version)50-100 panels pallet equal to 120-60 m2 (respectively for 10-20 mm versions)

Sound dampening element made of vulcanised granules rubber to be installed under heavy loads.Density approx. 700 kg/m3.

> Conditions of use

Isolmant Damp is a sound dampening product suitable for vibration isolation of horizontal structures to be installed under heavy loads.


Sound dampening and anti-vibration product made of agglomerate of SBR rubber granules to be installed under heavy loads. (Isolmant Damp type). Thickness approx. 5 - 10 - 20 mm. Density approx. 700 kg/m3.


SPECIAL PRODUCTS

> ISOLMANT STRONG



COMPRESSIVE STRENGTHdeformation 10%: 85 kPadeformation 25%: 120 kPadeformation 50%: 185 kPa

COMPRESSION SET0,5 h after discharge, 23°C: 8%24 h after discharge, 23°C: 3%after 22 h load causing 25% deflection






SIZE Rolls of 1.50 m x 50 m (h x L) = 75 m2


Acoustic resilient layer made of high-density Isolmant (approx. 70 kg/m3). It is suitable for impact sound insulation and vibration isolation in case of heavy loads.

> Conditions of use

Isolmant Strong is recommended for impact sound insulation and vibrations isolation in case of very heavy loads. In non-residential structures, when live loads exceed 5 kN/m2, it can be used also by overlapping some layers on each other.


The resilient layer is made of high density physically cross-linked polyethylene foam for impact sound insulation and vibrations isolation with high compressive strength under heavy loads (live loads exceeding 5 kN/m2) (Isolmant Strongtype). Thickness 6 mm, density 70 kg/m3. 10% compressive deformation with 85 kPa. 3% residual deflection after 24 h (after 22 h load causing 25% deflection).

WARNING

Although, these instructions are the result of our best expertise they are indicative. The user should establish whether the product is suitable for its intended application. The user will be also in charge of all the responsibility for the use of the product itself. The technical information in this catalogue replaces the previous one. Tecnasfalti reserves to change without notice product size and packaging.

For further information, please refer to the website www.isolmant.com

ATTENTION:Do not expose to direct sun or severe weather conditions.Temperatures below 10° C could reduce the adhesive properties of some products. Please, do not expose the materials to lower temperatures except for the installation (please refer to the icons on technical specifications and packages). Do not use on cold and / or humid surfaces since the presence of water reduces irremediably the adhesive characteristics of the product.

for purchase orders, please contact: [email protected]

for commercial information: [email protected]

for technical information: [email protected]

for general requests: [email protected]

Follow us on

cod. Articolo D001 SALE ENG is a Tecnasfalti srl registered brand. All brands in the catalogue are protected © TECNASFALTI All rights reserved - Any reproduction, even partial, is prohibited - In force as of 1 May, 2018. Replaces and supersedes all previous editions

TECNASFALTI Srl | Via dell’Industria, 12 Loc. Francolino 20080 Carpiano (Milan)

Tel +39 02 9885701 | Fax +39 02 98855702 | [email protected] | www.isolmant.com

product catalogue edition 2018building · thickness approx. 5 mm impact sound insulation Δl w =...

Documents