product catalogue - eltelnetworks.com · installed on existing ladder with vertical profile b 14...

PRODUCTCATALOGUE

2017

2 3Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi

Product Catalogue

Table of contents

For further information, inquiries and offers,

E-mail: [email protected]

www.turvatikas.fi

Eltel Networks CorporationLaturinkuja 802650 Espoo,FINLAND Tel. +358 20 411 211 Fax: +358 20 411 3200

Tabl

e of

Con

tent

s

Vertical Profile B 06Cleat Ladder TBA-I 07Cleat Ladder TBA-I with Releasable steps 08Cleat Ladder TBA-II 09Flange Ladder PTBJ 10Flange Ladder PTBR 11End Bow B 50 12Side-End Bow B 50 SR/SL 13End Bow PTBK 59 14

Horizontal Profile B 18Releasable Horizontal Carriage Stopper no. 86 19Horizontal Carriage Lead-in no.88 20Horizontal Carriage no. 951 21

Anti-Climb Device no.25 24Sleeve Joint no.70 25Cable Support no.72/74 26Top Cover no.80 27Vertical Carriage Lead-in no.82 28Carriage Guide no.84 29Releasable Vertical Carriage Stopper no.85 30Output Set no.87 31Carriage Stopper no.89 32Releasable Vertical Carriage Stopper no.851 33Landing no.104 34Landing no.105 35

Rung Fastener no. 10 38Basic Clamp no.15 39Universal Fasteners no. 20/21/22 40Pylon Fastener no. 31 41Level Fastener no. 32 42Steel Structure Fastener no. 33 43Angle Iron Fastener no. 34 44Wall Fastener no. 35 45Mast Fastener no.41/42 46Angle Iron Fastener no. 44 47Pole Fastener no. 45 48Pole Fastener no. 50/51/52 49OPGW Fastener no. 79 50Wall Mounts no. 114...119 51Flange Fastener no.461/462/463 52

Climbing Carriage no. 932 56Horizontal Carriage no. 951 57

Notes 58

PROFILES AND LADDERS

HORIZONTAL PROFILES

ACCESSORIES

FASTENERS

CARRIAGES

NOTES

Turvatikas Safety Ladder is an EN353-1:2014 Certified Safety System to prevent climbing accidents and provide work efficiency.

Zero severe accidents ever occurred with Turvatikas Safety Ladder. The system is reliable in all conditions as sand, dirt, snow or ice do not hamper the system.


Vertical Profile B 06Cleat Ladder TBA-I 07Cleat Ladder TBA-I with Releasable steps 08Cleat Ladder TBA-II 09Flange Ladder PTBJ 10Flange Ladder PTBR 11End Bow B 50 12Side-End Bow B 50 SR/SL 13End Bow PTBK 59 14

Turvatikas Safety Ladder provides reliable solutions for climbing high structures.

Page

s 06

-14PROFILES AND LADDERS


Vertical Profile BTo be installed on existing ladders or structures

ProductVertical Profile B

FeaturesDelivery lengths 3, 5 and 6 m,

holes for extension joints in both ends of profile.

Weight4,5 kg/m

Notes

MaterialHot-dip galvanized steel or

acid-proof stainless steel

MaterialHot-dip galvanized steel

ProductCleat Ladder TBA-1

FeaturesDelivery length 3m, holes for

extension joints in both ends of profile.

Welded U-profile rungs.

Weight5,5 kg/m

Notes

Cleat Ladder TBA-IComplete ladder structure.

For poles, masts and chimneys

Profi

les

and

Ladd

ers


ProductCleat Ladder TBA-1



Weight5,5 kg/m

Notes



MaterialHot-dip galvanized steel or acid-

proof stainless steel

ProductCleat Ladder TBA-II



Welded U-profile rungs

Weight6,2 kg/m

Notes

Cleat Ladder TBA-I with Releasable stepsSteps can be removed to prevent climbing

Cleat Ladder TBA-IIComplete ladder structure.

For poles, masts and chimneys

Profi

les

and

Ladd

ers


ProductFlange Ladder PTBR

FeaturesDelivery length 5,7m, holes for extension joints in both ends of

profile. Welded U-profile rungs.

Flanges with sleeve joints.

Weight12,7 kg/m

Notes

MaterialHot-dip galvanized steel

Flange Ladder PTBRComplete ladder structure.

Flange Ladder PTBJComplete ladder structure.

ProductFlange Ladder PTBJ



Welded U-profile rungs.Flanges with sleeve joints.

Weight7,7 kg/m

Notes



Profi

les

and

Ladd

ers


End Bow B 50Installed on existing ladder with Vertical Profile B



ProductEnd Bow B 50

FeaturesStraight section 1,65 m.

Weight15 kg

Notes

Profi

les

and

Ladd

ers

MaterialHot-dip galvanized steel or acid-

proof stainless steel

ProductSide-End Bow B 50 SR/SL

FeaturesAfter straight section 1,65 m

to right (SR) or to left (SL).

Weight15 kg

Notes

Side-End Bow B 50 SR/SLInstalled on existing ladder with Vertical Profile B


End Bow PTBJ 59Used with Flange Ladder PTBJ.

ProductEnd Bow PTBJ 59

FeaturesAt the straight part are six (6) rungs.

Bending radius: appr. 665 mm.Hand rails can only to be used to-gether with Flange Ladder PTBK.Highest part of the hand rails will

be appr. 980 mm from the roof level.

Hand rails can be mounted to the roof top.

Weight30 kg

Notes



Profi

les

and

Ladd

ers


HORIZONTAL PROFILES

Horizontal Profile B 18Releasable Horizontal Carriage Stopper no.86 19Horizontal Carriage Lead-in no.88 20Horizontal Carriage no. 951 21

Ultimate safety for horizontal levels

Page

s 18

-21


ProductHorizontal Profile B

FeaturesSee above.

Weight4,5 kg/m

NotesMaterial and measurements simi-lar to the Vertical Profile B but wit-hout locking fins on the bottom. Fixing with Basic Clamps no 15

which are not included.

Materialhot-dip galvanized steel or


Horizontal Profile BUsed with horizontal carriage on safety platforms.

Hor

izon

tal P

orfil

esH

oriz

onta

l Por

files



ProductReleasable Horizontal Carriage

Stop no.86

FeaturesSee above.

Weight1,0 kg

NotesCompatible with Horizontal Profile VB based products.Also suitable for platforms.

Releasable Horizontal Carriage Stopper no.86To stop the Carriage at the end of the profile or at desired spots


ProductHorizontal Carriage Lead-in no.88

FeaturesSee above.

Weight5,3 kg

NotesCompatible with Horizontal Profile VB based products.

Used e.g. along with smoke exhaust hatches or roof ladders.



Horizontal Carriage Lead-in no.88Used with Vertical Profile VB to get Horizontal Carriage no.151 in or out of the profile at desired spots

Hor

izon

tal P

rofil

esH

oriz

onta

l Por

files

MaterialAcid-proof stainless steel

ProductHorizontal Carriage no.951

FeaturesSee above.

Weight0,7 kg

NotesSlides easily with moderate load.

Carriage is equipped with snap-hook.

Horizontal Carriage no.951Safety Carriage for use in horizontal movement only.


ACCESSORIES

FLEXIBILITY

Turvatikas products are used on more than 40 countries by over 700 companies

Turvatikas products have evolved and adjusted to diverse customer need for over four decades.

Solutions for every need!

QUALITY

The safety carriage and rail combination is tested according to standard EN353-1:2014.

The production process conforms to quality management standards ISO9001:2015 and ISO14001:2015.

EASY ASSEMBLY

We provide fastening solutions to any target and offer design services for special fasteners. Our complete installation manuals and technical support offer help to any issue

at site.

Page

s 24

-35

Anti-Climb Device no.25 24Sleeve Joint no.70 25Cable Support no.72/74 26Top Cover no.80 27Vertical Carriage Lead-in no.82 28Carriage Guide no.84 29Releasable Vertical Carriage Stopper no.85 30Output Set no.87 31Carriage Stopper no.89 32Releasable Vertical Carriage Stopper no.851 33Landing no.104 34Landing no.105 35


Anti-Climb Device no.25Prevent unauthorized climbing on the ladders.

ProductAnti-Climb Device no.25

FeaturesPrevent unauthorized climbing to

the Safety Ladders.Compatible with Safety Ladders

PTBJ, PTBK, TBA-1 and TBA-2.Locked with padlock (does not

include to the delivery)Available also with hinges.

Weight12,4 kg

NotesCompatible with Flange Ladders

PTBJ and PTBK and Cleat Lad-ders TBA-I and TBA-II.Locked with padlocks.

Padlocks are not included in delivery.



Sleeve Joint no.70For connecting profile or ladder sections together

ProductSleeve joint no.70

FeaturesFor joining Profile and Safety Lad-

der sections together

Weight0,18 kg/pc

NotesCompatible with all

Vertical Profile B and Horizontal Profile VB based products.

Bolts, nuts and washers are included.


acid-steel stainless steel

Acce

ssor

ies


Cable Support no.72/74Cable support is used with Flange Ladder PTBJ or PTBK.



ProductCable Support no.72/74

FeaturesCompatible with Safety Ladder

PTBJ ja PTBK.For mounting cable to the left side

of the Safety Ladders.Cables to be mounted with cable

clamps (clamps are not included in the delivery)

Weight0,35 kg.

NotesCompatible with Flange Ladders

PTBJ and PTBK. It is attached to cross section of

rung and flange. Locked by hammering a lip on the support in, under the rung. Cable

is attached with clamp.

Acce

ssor

ies

Top Cover no. 80Used with Weather Protection no.60.



ProductTop Cover no.80

FeaturesTo be always used together with

Carriage Stopper 89.Suitable for vertical and horizontal

installed profiles

Weight0,5 kg.




Acce

ssor

ies

Vertical Carriage Lead-in no.82Used if carriage needs to be inserted or pulled out in the middle of profile.

ProductVertical Carriage Lead-in no.82

FeaturesSuitable for vertical profile.

For attach/detach carriage in midd-le of profile.

Available also as a retofit kit that could be installed to the existing

profile.

Weight1,2 kg.

NotesCompatible with Vertical Profile B

based products.



Carriage Guide no. 84To prevent incorrect insertion of the climbing carriage.

ProductCarriage Guide no.84

FeaturesTo prevent incorrect insertion of

the climbing carriage.To be used always at lower end of vertical profile together with verti-

cal carriage stopper no 851.To be used always at higher end of the vertical profile together with vertical carriage stopper no 85.

Weight0,45 kg.



Bolt is included. To be used with Releasable

Vertical Carriage Stopper no 85.




Acce

ssor

ies

Output Set no. 87Used if carriage needs to be guided into a Horizontal Profile VB in the

middle of the profile.



ProductOutput Set no.87

FeaturesFor turn carriage from vertical

profile to horizontal profile and vice versa

Weight7,0 kg.

NotesCompatible with Vertical Profile B

and ladders: TBA-I, TBA-II, PTBJ and PTBK.

Releasable Vertical Carriage Stopper no. 85Prevents carriage from slipping out unintended.



ProductReleasable Vertical Carriage

Stopper no.85

FeaturesReleasable carriage stopper to be installed on the holes for sleeve

joints at upper end of vertical profi-le to preven carriage from slipping

out unintended.To be always used with Carraige

Guide no 84

Weight0,25 kg.


Vertical Profile B based products. To be used with Carriage Guide

no.84.


Carriage Stopper no.89Permanent carriage stopper to prevent the carriage from slipping out uninten-ded.



ProductCarriage Stopper no.89

FeaturesPermanent carriage stopper that

is installed to prevent carriage from slipping out from profile

unintended. To be installed on upper end of vertical profile or at the end of

horizontal profile.

Weight0,4 kg.



Acce

ssor

ies

Releasable Vertical Carriage Stopper no.851Installed on lower end of vertical profile extension hoes to prevent carriage from

slipping out unintended.

ProductReleasable Vertical Carriage

Stopper no.851

FeaturesReleasable carriage stopper to be installed at lower end of vertical profile to prevent carriage from

slipping out unintended.To be always used with Carriage

Guide no 84.

Weight1,2 kg.


wVertical Profile B based pro-ducts.




Acce

ssor

ies

Landing no.104Resting platform for standing.

ProductLanding no.104

FeaturesFor rest on the feets during clim-

bing.Folds away to not disturb climber when passing the LandingLevel.

Fits to Profile and all type of Safety Ladders.

Weight4,5 kg.

NotesLanding no 104 folds away and

allows easy access for the climber.Compatible with all

Vertical Profile B based products.



Landing no. 105Seat platform for resting.



ProductLanding no.105

FeaturesSeat platform for resting.

Does not prevent climbing.Fits to Profile and all type of Safety

ladders.

Weight4,5 kg.

NotesDoes not prevent climbing.

Compatible with all

Vertical profile B based products.


FASTENERSThere is always a solution how the components can be installed, otherwise we will design it!

QUALITY

Continuous product development and a long history, this is why we can guaran-tee our products carefree, simplicity and security. Products last in rugged arctic, barren islands as well in wilderness wi-thstanding challenging circumstances.

EASY ASSEMBLY

All of our parts are made compatible and easy to install. Every part includes a user-friendly guide, and remember to look at the fascinating installation videos on our website!

FLEXIBILITY

Our products are designed in a way that we can ensure their compatibility, but still easy and simple to use.

Page

s 38

-52

Rung Fastener no. 10 38Basic Clamp no.15 39Universal Fasteners no. 20/21/22 30Pylon Fastener no. 31 41Level Fastener no. 32 42Steel Structure Fastener no. 33 43Angle Iron Fastener no. 34 44Wall Fastener no. 35 45Mast Fastener no.41/42 47Angle Iron Fastener no. 44 48Pole Fastener no. 45 46Pole Fastener no. 50/51/52 49OPGW Fastener no. 79 50Wall Mounts no. 114...119 51Flange Fastener no.461/462/463 52


Rung Fastener no. 10For mounting Vertical Profile B existing ladders.

ProductRung Fastener no.10

FeaturesApplicable for rung diameters

16mm…25mm.

Weight0,5 kg.





Fast

ener

s

Basic Clamp no. 15For mounting profiles and ladders.

ProductBasic Clamp no.15

FeaturesTo mount profile or safetyladder to

the client’s own fastener Delivery includes bolts for locking

and mounting

Weight0,3 kg.


Vertical Profile B and Horizontal Profile VB based products .




Fast

ener

sFa

sten

ers

Universal Fastener 20/21/22For mounting profiles and ladders to different kinds of steel structures.



ProductUniversal Fasteners 20/21/22

FeaturesSee above.

Weight0,9/1,1/1,6 kg.



Pylon Fastener no. 31Used for fastening ladders to pylons.



ProductPylon Fastener no.31

FeaturesMaximum pylon diameter 800

mm. Free back clearance 120 mm.

Weight1,3 kg.



Basic Clamp no 15 is included.


Fast

ener

s

Level Fastener no. 32Mainly used with Horizontal Profile VB.

ProductLevel Fastener no.32

FeaturesSee above.

Weight0,7 kg.





Steel Structure Fastener no. 33Used with different kinds of steel structures.

ProductSteel Structure Fastener no.33

FeaturesSee above.

Weight0,6 kg

.






Fast

ener

s

Angle Iron Fastener no. 34Suitable for L-profile structures.

ProductAngle Iron Fastener no. 34

FeaturesSuitable for L-profiles L80-200.

Weight1,5 kg.





Wall Fastener no. 35Used for fastening ladders to walls.

MaterialHot-dip galvanized steel or wacid-proof stainless steel

ProductWall Fastener no.35

FeaturesFree back clearance 200 mm.

Weight2,0 kg.



Basic Clamp no 15 is included.


Fast

ener

s

Mast Fastener no. 41/42For mounting profiles and ladders to tower members.



ProductMast Fastener no.41/42

FeaturesSee above.

Weight0,8 kg / 1,1 kg


Vertical Profile B.

Angle Iron Fastener no. 44Suitable for L-profile structures.

Weight2,8; 3,2; 6,2 kg





ProductAngle Iron Fastener no.44 /1, 44/2, 44/3

FeaturesSee above.


Fast

ener

s

Pole Fastener no. 50/51/52Used with ladders with specified diameters.



ProductPole Fastener no.50/51/52

FeaturesSuitable pole diameters are

219,9 mm, 273 mm and 323,9 mm.

Weightapprox. 3 kg



Pole Fastener no. 45Used for installing ladders to various kinds of poles.

ProductPole Fastener no. 45

FeaturesFits to the poles diameter 88 - 219

mm.Distance between Safety Ladder

and the pole is adjustable between 120 - 170 mm.

The bolts in the delivery fits for the pole with diameter 130 - 180 mm.

Different length og the bolts will be delivered if requested

Weight5 kg





1 2 3 4

1 4

A

B

C

D

E

F

D

C

B

A

F

E

Osanumero / Part number

Pintakäsittely - Surface Finishing Väri - ColorToleranssit - Tolerances MassaWeight

MittakaavaScale

Suun. - Drawn by

Hyväk. - Approved by

OsaPart

OsanumeroPart number

Osan tai kokoonpanoryhmän nimitysDescription

Mitat, muoto, malliDimensions, shape, model

MateriaaliMaterial

Massa/kgWeight/kg

KplReg'd

Piirustusnumero / DWG.NO

Tässä oleva informaatio on Salomaan Konepaja Oy:n omaisuutta, eikä sitä saa jäljentää, näyttää kolmannelle osapuolelle tai käyttäämillään tavalla ilman Salomaan Konepaja Oy:n tai sen asianmukaisesti valtuuttaman edustajan nimenomaista kirjallista lupaa.

The information contained herein is proprietary to Salomaan Konepaja Oy and is not to be reproduced, communicated to a third person or usedin any manner whatsoever without the express written permission of Salomaan Konepaja Oy or a duly authorized representative thereof.

FITT2400/D88-D219KN 2.5.2017

3,049 kg

LS 28.4.2017

Putkikiinnike no 40 Ø88-Ø219 H=130-175Salomaan Konepaja Oy

LAIROLANTIE 1, 24910 HALIKKO ASPuh. (02) 7372 300 - Fax (02) 7372 301

www.salomaankonepaja.fi

Materiaali - Material

Ø88...Ø219

130...175


Fast

ener

s

Wall Mounts no. 114...119For mounting ladders to wall.

ProductWall Mounts no.114...119

FeaturesSee above.

Weight2,0-3,0 kg.

NotesCompatible with Flange Ladder

PTBK based products.



OPGW Fastener no. 79Used with optical ground wire.



ProductOPGW Fastener no.79

FeaturesCoupler made of aluminum

Applicable for optical ground wire diameters 11mm…19mm.

Weight0,5 kg.




Fast

ener

s

Flange Fastener no. 461/462/463For mounting ladders PTBJ to masts’ diagonals.

ProductFlange Fastener no.461/462/463

FeaturesSuitable profiles:

461: L35-70 462: L80-120 463: L130-150

Weight0,7 kg /0,9 kg /1,1 kg

NotesCompatible with Flange Ladder

PTBJ based products.




CARRIAGESPPE that ensures your safety.

Page

s 56

-59

Climbing Carriage no.932 56Horizontal Carriage no.951 57Notes 58Fact Sheet 59


ProductClimbing Carriage no.932

FeaturesSee above.

Horizontal Carriage no. 951Safety Carriage for use in horizontal movement only.

Climbing Carriage no. 932Used with Vertical Profile B based products. Shock absorber with snap-hook in carriage.

Weight1,0 kg


Vertical Profile B based products.Tested in accordance with the

applied methods EN 353-1:2014, prEN 353-1:2008 and

CNB/P/11.073.



ProductHorizontal Carriage no.951

FeaturesSuitable only for horizontal profile.

Comes with a carabiner

Weight0,7 kg.

NotesSlides easily with moderate load.

Carriage is equipped with snap-hook.

Carr

iage

s

Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi58 59

Not

es &

Fac

ts

Notes Fact Sheet

PRODUC T INFORMATION Produc t t ypeGuided t ype fa l l ar rester inc luding a r igid anchor l ine

Brand name Tur vat ik as Safet y Ladder

Provider Elte l Net works O y

CE number 0403

Mater ia lHot- dip galvanized steel , Acid proof steel - AIS I 316

Zink c lass M inimum layer thick ness 55µm

Zink corros iv i t y cate -gor y

C4 (EN 12944-2 and EN ISO 14713-1)

Appl icat ionsH igh struc tures, hor izontal levels and pre - exist ing ladders

CompatibleAl l Tur vat ik as Safet y Ladder compo -nents

Stopper tooth distance 15 cent imetres

Steel mater ia l S355MC/JJA EN 10149-2:2013

Del iver y lenghts3m (Al l produc ts) , 5m (Prof i le -B) , 5 .7m (PTBR, Prof i le -B) , 6m (Prof i le -B)

Warrant y per iod 36 months

Countr y of or igin Finland

PRODUC T CER TIFICATES EU EN353-1:2014

Germany DIN 5U001 ( TBA-2)

PRODUC TION CER TIFICATES Qual i t y ISO9001

Responsibi l i t y ISO14001

Qual i t y EN1090-1:2009+A1:2011

G alvanizat ion standard EN ISO 1461

product catalogue - eltelnetworks.com · installed on existing ladder with vertical profile b 14...

Documents