PRODUCT DATASHEETRonda serieslast update 19/8/2016

DETAILS

Product Number FCN15621_RONDA-W

Family Ronda

Type Assembly

Color white

Diameter 69,9 mm

Height 14,6 mm

Style round

Optic Material PMMA

Holder Material PC

Fastening

Status production ready

ROHS Comliant Yes

Date Updated 19/08/2016

OPTICAL PROPERTIES Viewing Light Effi-

LED Angle Beam ciency cd/lm Connector

V10 sim: 44 Wide 88 % sim: 0.000 Bender Wirth: 455 Typ L1

CLU710 sim: 44 Wide 89 % sim: 0.000 Bender Wirth: 470 Typ L1

CLL02x/CLU02x (LES10) sim: 42 Wide 88 % sim: 0.000 Bender Wirth: 434 Typ L1

CXA/B 15xx sim: 42 Wide 88 % sim: 0.000 Bender Wirth: 441 Typ L1

CXA/B 1816 & CXA/B 1820 & CXA 1850 sim: 48 Wide 88 % sim: 0.000 Bender Wirth: 437 Typ L1

Mini Zenigata (GW6BM) sim: 40 Wide 89 % sim: 0.000 Bender Wirth: 452 Typ L1

September 13th 2016 16:17 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

Examples

AH BG

DE CF BG AH

33

22

44

11

Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L

SCALE 1:1 WEIGHT - SHEET 1/3

SIZE

A3

DRAWING TITLE

PART NUMBER

-

Ledil OySalorankatu 10FIN 24240 SALOFinland

THIRD ANGLE PROJECTION:

This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.

See more details on page 2 and 3

RONDA-family

Ledil-clamp / TE / Bender-wirth / other twistand lock socket types (holder A)

LES size up to ~14mm, seecompatibility www.ledil.com

D=69.9mm Optic

D=49.9Front plate examples

BJB and Stucchi 50mm (holder B)

Vertical fix: M3 Screw /Twist and lock / SnapRotation fix Horizontal fix: M3 Nut + bolt

AH BG

DE CF BG AH

33

22

44

11

Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L

SCALE 1:1 WEIGHT - SHEET 2/3

SIZE

A3

DRAWING TITLE

RONDA-familyPART NUMBER

-

Ledil OySalorankatu 10FIN 24240 SALOFinland

THIRD ANGLE PROJECTION:

This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.

11.212.7

14.6

7.7

ronda-was

8 .9

4

Front view

Socket

2.4 *

6

3 .5

2.2

64.1

()

59.3

Bottom view

Nut slot

69.9

hold

er

49.9

optic61

3.23.2

3.2

45.8

(

)53.3

Top view

Isometric view

Front panel location suggestion whenseamless look needed

* Ensure from 3d according specific optic version

A

Detail A

AH BG

DE CF BG AH

33

22

44

11

Tolerances if not otherwise shownAccording to DIN ISO 2768-1Linear measures:up to 30mm class M, otherwise class CAccording to DIN ISO 2768-2Form and position: class L

SCALE 1:1 WEIGHT - SHEET 3/3

SIZE

A3

DRAWING TITLE

RONDA-familyPART NUMBER

-

Ledil OySalorankatu 10FIN 24240 SALOFinland

THIRD ANGLE PROJECTION:

This drawing is the propertyof LEDiL Oy. It may not bereproduced, copied orcommunicated without a writtenagreement with LEDiL Oy.

TYPICAL CONNECTOR ASSEMBLY (including solderless BENDER WIRTHas example)

1. Place pin on the side of the lens into relativehole on the holder. B

DET B Pin

Holder hole

2. Press the lens under clips on the holder, ensuring bothclips are fixed.

Clip

Clip

Pin

OPTIC/HOLDER ASSEMBLY

1. Ensure correct relation of clamp andconnector before screwing. Recommendedtorque 0.6Nm.

2. Assemble LED, BENDER&WIRTH connectorand C13658_CLAMP-VERO13-18 clamp onheatsink with M3 screw.

3. Attach optic by aligning the holes inthe holder with hooks and turning theoptic holder clockwise until it locks.

Bender&Wirth model 4xx Typ L1

Align clamp positioning pin with holesin the connector.

NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.GENERAL INFORMATION

- Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible.

Note! Due to use of high power COB's with this product, special attention to proper thermal design is highlyrecommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiLproducts being used outside of the recommended temperature range.