product guide - cloud object storagecdncontent2.idatalink.com/corporate/content/manuals/rst... ·...

160
REVISION DATE 20151023 DOCUMENT NUMBER NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. U.S. Patent No. 8,856,780 PRODUCT GUIDE iDatastart HC www.idatalink.com Automotive Data Solutions Inc. © 2015

Upload: others

Post on 17-Apr-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

Revision Date20151023

Document numbeR

notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

PRoDuct guiDeiDatastart HC

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 2: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

GETTING STARTED

WeLcome

neeD HeLP?

Congratulations on the purchase of your iDataStart HC solution. You are now a few simple steps away from enjoying your new remote starter unit with enhanced features. Before starting your installation, please ensure that your iDataStart HC module is programmed with the correct fi rmware for your vehicle and that you care-fully review the install guide.

1 866 427-2999

[email protected]

idatalink.com/supportwww.12voltdata.com/forumwww.facebook.com/groups/idatatech

tabLe oF contents

Box Contents 3

Module Pinout 4

Tach Programming Procedure 5

Remote Programming Procedure 6

Valet Mode Programming Procedure 7

Compatible Accessories 9

Online Module Settings 10

Module Diagnostics 11

Remote Starter Error Codes 12

Module Reset Procedure 13

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 2 of 13• 20151023

Page 3: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

BOX CONTENTS - 1 OF 1

M3 - 10 PIN WHITE

M2 - 12 PIN BLACK

AUTOMATICTRANSMISSION

CUT LOOP

M5 - 6 PIN BLUE

M4 - 20 PIN BLACK

M1 - 8 PIN BLACK

HCF - HCF900A

HC1 - HC1151AC

HC2 - HC2351AC

HC2 - HC2352AC

HCX - HCX000A

BOX CONTENTS

NC - 4 PIN RED

TELEMATIC 2 - 4 PIN RED

TELEMATIC 1 - 4 PIN BLUENC - 3 PIN BLACK

PROGRAMMING BUTTON

ANTENNA BUTTON

USB

LED 2

ANTENNA LED

LED 1

RF PORT/WEBLINK PORT - 4 PIN BLACK

2 PIN BLACKRF PORT - 4 PIN BLACK

RF PORT - 4 PIN BLACK

ANTENNA RF PORT - 4 PIN WHITE6 PIN WHITE OR BLUE

2-WAY REMOTE - TR2350AC

1-WAY REMOTE - TR1150A

RF DECODERCABLE

M1M2M3M4M5HOOD SWITCH

ANTENNACABLE

RF DECODER - FT-D100

STICKERS

ANTENNA - AN2300A

HC MODULE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 3 of 13• 20151023

Page 4: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

MODULE PINOUT - 1 OF 1

79

3

10864

12

5

79

3

108

1112

64

12

5

79

3

108

111314

12

1517181920

16

64

12

5

453

21

6

M3

M2 M5

M1

M4

4

2

8

1

3

5

7

6

AUTOMATICTRANSMISSION

CUT LOOP

M5

M4

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

- PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 EMPTY07 EMPTY

POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUTPOC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT

POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUTPOC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT

12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 EMPTY

FUNCTIONS DEFINED BY FIRMWARE

FUNCTIONS DEFINED BY FIRMWARE

M3

M2

M1

06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)

HC MODULE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 4 of 13• 20151023

Page 5: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01

ENGINESTARTSTOP

OFF ACC ON STARTSTARTSTART

02

03

04

05

06

TACH PROGRAMMING PROCEDURE - 1 OF 1

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)

Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)

Release the brake pedal.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 5 of 13• 20151023

Page 6: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01 [4x]

02

ENGINESTARTSTOP

OFF ACC ON STARTON

03

04

05

06

07

08

ENGINESTARTSTOP

OFF ACC ON STARTOFF

09

_________________________________

>>F

_________________________________

REMOTE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: Complete the module programming procedure and tach programming procedure before programming the remotes. A maximum of four [4x] remotes per system.

Set ignition to ON position.

Press and release the antenna button, then press and hold the antenna button. The antenna’s leds will turn solid BLUE.

Parking Light will fl ash once [1x].

Press once [1x] on the LOCK button of each remote.

The antenna’s leds will fl ash BLUE once [1x] for each successful pairing.

Release the antenna button. The antenna’s leds will turn OFF.

Set ignition to OFF position.

Remote Programming Procedure completed.

To program an additional remote as second vehicle mode: Follow steps 1 to 4. Press twice [2x] on the “F” button then press once [1x] on the LOCK button of the remote. Follow steps 6 to 9.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 6 of 13• 20151023

Page 7: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02

ENGINESTARTSTOP

OFF ACC ON STARTON

03

04

05

ENGINESTARTSTOP

OFF ACC ON STARTOFF

06

>>

VALET MODE PROGRAMMING PROCEDURE - 1 OF 1

NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.

Time restriction. Complete next step within 7 seconds.

Cycle ignition ON twice [2x OFF/ON] rapidly.

Press and release the BRAKE pedal three times [3x].

Parking Light will fl ash once [1x] then will fl ash twice [2x].

Set ignition to OFF position.

Valet Mode Programming Procedure completed.

To exit valet mode: repeat steps 1 to 5.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 7 of 13• 20151023

Page 8: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 8 of 13• 20151023

COMPATIBLE ACCESSORIES - 1 OF 2

MODULETELEMATIC BLUE PORT

*For SmartStart, use the module’s RED Telematic port.

(NC)

TELEMATIC KIT (accessory sold separately)

10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9

WEBLINK MOBILE (accessory sold separately)

MOBILE DEVICE PORT

OBDII CONNECTOR

4 PIN BLACK CABLEMODULE WEBLINK PORT

OBDII CONNECTOR

WEBLINK CABLE (required accessory sold separately)

WEBLINK CABLE

COMPUTERUSB PORT

4 PIN BLACK CABLE

MODULE WEBLINK PORT

Page 9: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 9 of 13• 20151023

COMPATIBLE ACCESSORIES - 2 OF 2

RF KITRF DECODER - FT-D100

RF DECODER (included with the HCF)

ANTENNA

FLASH THE DECODERBEFORE THE INSTALLATION

DECODERBLUE CABLE BLACK CABLE

(NC) RED(NC) BLACK

BLACK

BLUEor

WHITEMODULERF PORT

RF KIT (sold separately)

4 PIN BLACK CABLE

MODULE RF PORT

RF KIT (included with the HC1 & HC2)

ANTENNA

Page 10: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

oNLINe MoDULe SeTTINgS - 1 OF 1

WeB PRogRaMMaBLe MeNUS DeSCRIPTIoNMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog

Programming options are avaible through Weblink and Weblink Mobile only.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 10 of 13• 20151023

Page 11: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

MoDULe DIagNoSTICS - 1 OF 1

TeST MoDULe

LeD

1 S

TaTU

S

DIa

gNo

STIC

I DURING MODULE PROGRAMMING

Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.

II DURING TACH PROGRAMMING

1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required

III DURING REMOTE START

Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.

IV WITH IGNITION OFF

Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 11 of 13• 20151023

Page 12: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

ReMoTe STaRTeR eRRoR CoDeS - 1 OF 1

ReMoTe STaRTeR eRRoR CoDeS:NoTeS

[X] N

UM

BeR

of

PaR

KIN

g LI

gHT

fLaS

HeS

DIa

gNo

STIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine running. 02 Key in ignition at ON position.

II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.

03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.

ReMoTe STaRTeR SHUTDoWN eRRoR CoDeS:NoTeS

[Y] N

UM

BeR

of

PaR

KIN

g LI

gHT

fLaS

HeS

DIa

gNo

STIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine tach signal is lost.02 Emergency brake is lost.

II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.

The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.

03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 12 of 13• 20151023

Page 13: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02

03

04

05

06

07

08

>>

MODULE RESET PROCEDURE - 1 OF 1

The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.

Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

Wait, LED 1 will flash RED. RELEASE programming button.

LED 1 will turn RED for 2 seconds.

Module RESET completed.

Reconnect all connectors.

Repeat programming procedure.

Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

Page 13 of 13• 20151023

Page 14: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2008-2011 Hyundai accent Std key at

HARDWAREadS-HcX

ACCESSORIES adS-uSB (OPtiOnaL)adS-WLM-an1/adS-WLM-aP1 (OPtiOnaL)dROne MOBiLe dR-2000 (OPtiOnaL) cOMPatiBLe RF-kit (OPtiOnaL)

FIRMWAREadS-HcX(RSt)-Hk2-[adS-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 15: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01A_V1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

AD

B

C

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 16: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

10 11 12 1314 15 16 17 18 19 20 21 22 23 24 25 2627 2928 30 31 32 33 34 35 36 37 38 39

1 2 3 4 5 6 7 8 9

1 2 3 48 9 10 11

5 6 716 17 1812 13 14 15

1 2 3

4 5 6

1

101A_V1_[W]

3 4 5 61 2

17 18 19 20

7 8

15 1611 12 13 14

9

10

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) ORANGE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) GREEN - 02

YELLOW/BLACK - 16UNLOCK (-) YELLOW/BLACK - 16

LOCK (-) BLUE - 06LOCK (-) BLUE - 06

ARM (-) YELLOW/ORANGE - 35ARM (-) YELLOW/ORANGE - 35

DISARM (-) WHITE/BLACK - 33DISARM (-) WHITE/BLACK - 33

(-) RED - 10PARKING LIGHT (-) RED - 10

IMMOBILIZER (DATA) BLUE/BLACK - 15

IGNITION SWITCH (A)

I/P JUNCTION BOX (B)

DRIVER KICK PANEL (C)

12V (+) GREEN - 05

IGNITION (+) PINK - 06

TACH (AC) GREEN - 3204 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT- PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT- PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1

3

24

1: BLUE 42 PIN

HEADLAMP SWITCH (D)1: BLUE

1: WHITE 42 PIN

3: BLACK

4: WHITE 16 PIN

2: GRAY

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 17: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 18: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 19: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 20: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 21: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2012-2015 Hyundai accent Std key at

HARDWAREadS-HcX

ACCESSORIES adS-uSB (OPtiOnaL)adS-WLM-an1/adS-WLM-aP1 (OPtiOnaL)dROne MOBiLe dR-2000 (OPtiOnaL) cOMPatiBLe RF-kit (OPtiOnaL)

FIRMWAREadS-HcX(RSt)-Hk2-[adS-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 22: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

02A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

AB

D

E

F

C

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 23: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

3

2

1

2

3

2

1

1 2 3

4 5 6

10111213

1415161718192021

12345

6789

02A_v1_[W]

35 34 33 32 31 3036

22 21 20 19 18 1723

9 8 7 6 5 410

39 38 37

26 25 24

13 12 11

29 28 27

16 15 14

3 2 1

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 03

ACCESSORY (+) ORANGE - 02

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW BRAKE (+) PINK/BLACK - 02

LOCK (-) BROWN - 15

UNLOCK (-) GRAY - 13

DISARM KEY UNLOCK (-) GRAY/ORANGE - 12

UNLOCK DETECTION (-) BLUE/BLACK - 38

DRIVER DOOR PIN (-) BROWN/ORANGE - 02

PARKING LIGHT (-) PINK/BLACK - 07OR ORANGE - 01

IMMOBILIZER (DATA) BLUE/ORANGE - 11

IGNITION SWITCH (A)

I/P JUNCTION BOX (B)

DRIVER KICK PANEL (D)

12V (+) GREEN - 01

IGNITION (+) PINK - 04

TACH (AC) GREEN - 02

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - 12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1

1: WHITE

BRAKE SWITCH (E)1

CAMSHAFT POSITION SENSOR (F)1: BLACK 3 PIN

1: BLACK

I/P JUNCTION BOX (C)1: WHITE 14 PIN2: WHITE 13 PIN

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH BCM ONLY. ON VEHICLES WITHOUT BCM ADD ACTUATOR IN DRIVER DOOR.

WITH AUTOLIGHT ONLY.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 24: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 25: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 26: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 27: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 28: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2007-2010 Hyundai Elantra Std kEy at

HARDWAREadS-HCX

ACCESSORIES adS-uSB (OPtiOnal)adS-WlM-an1/adS-WlM-aP1 (OPtiOnal)drOnE MOBilE dr-2000 (OPtiOnal) COMPatiBlE rF-kit (OPtiOnal)

FIRMWAREadS-HCX(rSt)-Hk2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 29: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

14A_V1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

E

A

B

C

D

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 30: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

3

1

1

14A_V1_[W]

12345678910111213

14151617181920212223242526

39 38 37 36 35 34 33 32 31 30 29 28 27

05

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) ORANGE OR PINK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 01

TRUNK RELEASE (-) WHITE - 05

UNLOCK DETECTION (-) BLACK/ORANGE - 02

DISARM KEY UNLOCK (-) YELLOW/GREENOR YELLOW- 06

ARM (-) GREEN - 23

LOCK (-) GREEN - 25

PARKING LIGHT (-) ORANGE OR BLUE - 08

IMMOBILIZER (DATA) BLUE/BLACK - 15

IGNITION SWITCH (A)

PARKING LIGHT SWITCH (C)

DRIVER KICK PANEL (B)

12V (+) BLACK OR ORANGE - 05

IGNITION (+) BLUE - 06

TACH (AC) BLUE/RED - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE 14 PIN

1

PASSENGER KICK PANEL (E)

BRAKE SWITCH (D)

1: GRAY

1: GRAY 39 PIN

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WIRE MAY BE FOUND ON THE BACKSIDE OF CONNECTOR.

UNLOCK (-) YELLOW - 39

DRIVER DOOR PIN (-) RED - 36

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

1

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 31: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 32: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 33: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 34: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 35: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2010-2011 Hyundai Elantra touring Std kEy at

HARDWAREadS-HCX

ACCESSORIES adS-uSB (oPtional)adS-WlM-an1/adS-WlM-aP1 (oPtional)dronE MoBilE dr-2000 (oPtional) CoMPatiBlE rF-kit (oPtional)

FIRMWAREadS-HCX(rSt)-Hk2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 36: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

14A_V1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

E

A

B

C

D

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 37: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

3

1

1

14A_V1_[W]

12345678910111213

14151617181920212223242526

39 38 37 36 35 34 33 32 31 30 29 28 27

05

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) ORANGE OR PINK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 01

TRUNK RELEASE (-) WHITE - 05

UNLOCK DETECTION (-) BLACK/ORANGE - 02

DISARM KEY UNLOCK (-) YELLOW/GREENOR YELLOW- 06

ARM (-) GREEN - 23

LOCK (-) GREEN - 25

PARKING LIGHT (-) ORANGE OR BLUE - 08

IMMOBILIZER (DATA) BLUE/BLACK - 15

IGNITION SWITCH (A)

PARKING LIGHT SWITCH (C)

DRIVER KICK PANEL (B)

12V (+) BLACK OR ORANGE - 05

IGNITION (+) BLUE - 06

TACH (AC) BLUE/RED - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE 14 PIN

1

PASSENGER KICK PANEL (E)

BRAKE SWITCH (D)

1: GRAY

1: GRAY 39 PIN

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WIRE MAY BE FOUND ON THE BACKSIDE OF CONNECTOR.

UNLOCK (-) YELLOW - 39

DRIVER DOOR PIN (-) RED - 36

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

1

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 38: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 39: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 40: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 41: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 42: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2007-2012 Hyundai Santa Fe Std key at

HARDWAREadS-HCX

ACCESSORIES adS-uSB (OPtiOnaL)adS-WLM-an1/adS-WLM-aP1 (OPtiOnaL)dROne MOBiLe dR-2000 (OPtiOnaL) COMPatiBLe RF-kit (OPtiOnaL)

FIRMWAREadS-HCX(RSt)-Hk2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 43: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

12A_V1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

E

A

B

C

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 44: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

3

3

1

2

2

1

12A_V1_[W]

10 1112 13 14 15 16 17 18 19 20 21 22 23 241 2 3 4 5 6 7 8 9

10 1112 13 14 15 16 17 18 19 20 21 22 23 241 2 3 4 5 6 7 8 9

1

10

2

11

8312

413

514

615

716 17

9

18

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) RED OR BLUE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) GREEN/ORANGE - 21

UNLOCK (-) GRAY/BLACK - 19

DISARM KEY UNLOCK (-) PINK - 06

ARM (-) BROWN/ORANGE - 05

LOCK (-) BLUE/BLACK - 18

PARKING LIGHT (-) BLUE/ORANGE - 14

IMMOBILIZER (DATA) - 19

IGNITION SWITCH (A)

PARKING LIGHT SWITCH (C)

DRIVER KICK PANEL (B)

12V (+) RED - 05

IGNITION (+) ORANGE - 06

TACH (AC)

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT1: WHITE

PASSENGER KICK PANEL (E)

INJECTOR (D)

1: BLUE

1: BROWN

2: HARNESS IN RUNNING BOARD

3: BLUE 22 PIN

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

UNLOCK DETECTION (-) GRAY - 04

DRIVER DOOR PIN (-) GREEN/ORANGE

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

2007-2009: RED OR WHITE2010-2012: WHITE/ORANGE, WHITE OR RED

1

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 45: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 46: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 47: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 48: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 49: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2006-2008 Hyundai Sonata Std key at

HARDWAREadS-HCX

ACCESSORIES adS-uSB (oPtionaL)adS-WLM-an1/adS-WLM-aP1 (oPtionaL)dRone MoBiLe dR-2000 (oPtionaL) CoMPatiBLe RF-kit (oPtionaL)

FIRMWAREadS-HCX(RSt)-Hk2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 50: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

15A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

D

BC

E

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 51: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

2

1

2

1

1 2 3

4 5 6

15A_v1_[W]

10 1112 13 14 15 16 17 18 19 20 21 2223 24 25 26 27 28 29 30 31 32 33

1 2 3 4 5 6 7 8 9

2244

1111133

1132

10

1

18

9

17

8

124

135

146

157

16

1

6

2

7

3

8 9 10

4

11

5

12

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) ORANGE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) GREEN - 01

LOCK (-) YELLOW - 06

TRUNK RELEASE (-) WHITE - 16

DRIVER DOOR PIN (-) WHITE - 11

PARKING LIGHT (-) PINK - 14

IMMOBILIZER (DATA) GREEN - 23

IGNITION SWITCH (A)

HEADLAMP SWITCH (B)

DASH FUSEVOX, REAR (C)

DRIVER KICK PANEL (D)

12V (+) RED - 02

IGNITION (+) BLUE - 06

TACH (AC) WHITE - 28

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - 12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

BRAKE SWITCH (E)

BROWN 18 PIN

GRAY 24 PIN

BLACK 33 PIN

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

UNLOCK DETECTION (-) BROWN - 01

1

1: WHITE

03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 52: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 53: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 54: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 55: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 56: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2009-2010 Hyundai Sonata Std key at

HARDWAREadS-HCX

ACCESSORIES adS-uSB (oPtionaL)adS-WLM-an1/adS-WLM-aP1 (oPtionaL)dRone MoBiLe dR-2000 (oPtionaL) CoMPatiBLe RF-kit (oPtionaL)

FIRMWAREadS-HCX(RSt)-Hk2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 57: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

15A_v2_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

D

BC

E

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 58: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

2

1

2

1

1 2 3

4 5 6

15A_v2_[W]

10 1112 13 14 15 16 17 18 19 20 21 2223 24 25 26 27 28 29 30 31 32 33

1 2 3 4 5 6 7 8 9

2244

1111133

1132

10

1

18

9

17

8

124

135

146

157

16

1

6

2

7

3

8 9 10

4

11

5

12

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) ORANGE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) GREEN - 01

LOCK (-) YELLOW - 06

TRUNK RELEASE (-) WHITE - 16

DRIVER DOOR PIN (-) WHITE - 11

PARKING LIGHT (-) PINK - 14

IMMOBILIZER (DATA) GREEN - 23

IGNITION SWITCH (A)

HEADLAMP SWITCH (B)

DASH FUSEVOX, REAR (C)

DRIVER KICK PANEL (D)

12V (+) RED - 02

IGNITION (+) BLUE - 06

TACH (AC) WHITE - 28

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - 12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

BRAKE SWITCH (E)

BROWN 18 PIN

GRAY 24 PIN

BLACK 33 PIN

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

1

1: WHITE

03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

UNLOCK (-) ORANGE - 03

UNLOCK DETECTION (-) BROWN - 01

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 59: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 60: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 61: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 62: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 63: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2003-2008 Hyundai Tiburon 4 cyl STd key aT

HARDWAREadS-HcX

ACCESSORIES adS-uSb (oPTional)adS-WlM-an1/adS-WlM-aP1 (oPTional)drone Mobile dr-2000 (oPTional) coMPaTible rF-kiT (oPTional)

FIRMWAREadS-HcX(rST)-Hk2-[adS-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 64: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

03A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

AF

B

C

D

E

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 65: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

87A

30

87

8586

2

1

M3

M1

M2 M5M4

1 2 3

4 5 6

3

1011121314151617181920123456789

03A_v1_[W]

1 2 3 4 5 6107 8 9 1211

3

2

1

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

DRIVER DOOR PIN (-) GRAY/BLACK

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

MUST SET PROGRAMMABLE HIGH POWER RELAY #5 IN MENU 1 TO TRUNK RELEASE.

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) PINK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 01

LOCK/UNLOCK (-) YELLOW - 08

PARKING LIGHTS (-) BLUE/ORANGE - 14

DISARM (-) ORANGE

TRUNK (+) BLUE

IMMOBILIZER (DATA) BLUE/ORANGE - 20

IGNITION SWITCH (A)

BCM/DASH FUSEBOX (F)

REAR VIEW

FRONT VIEW

IGNITION COIL (D)

12V (+) RED - 05

IGNITION (+) RED - 06

TACH (AC) GREEN OR BLACK/RED

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - TRUNK RELEASE (+)06 WHITE - TRUNK RELEASE (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

2

HEADLAMP SWITCH (E)1: WHITE 18 PIN

BRAKE SWITCH (C)1

DRIVER KICK PANEL (B)1: HARNESS IN RUNNING BOARD

2: WHITE

1 BCM-EF: WHITE (BOTTOM RIGHT)

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

12 WHITE•BLACK DOT - 12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 66: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 67: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 68: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 69: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 70: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2005-2009 Hyundai Tucson 2.0L sTd key aT

HARDWAREads-HcX

ACCESSORIES ads-usB (oPTionaL)ads-WLM-an1/ads-WLM-aP1 (oPTionaL)dRone MoBiLe dR-2000 (oPTionaL) coMPaTiBLe RF-kiT (oPTionaL)

FIRMWAREads-HcX(RsT)-Hk2-[ads-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 71: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

04A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 72: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1

2

2

2

1

M3

M1

M2 M5M4

1 2 3

4 5 6

3

3

10

11 12 13 14 15 16 17 18 19 20 21 2322

1 2 3 4 5 7 8 996

04A_v1_[W]

1

12

2

13

3

14

4

15

5

16

6

17

7

18

8

19

9

20

10

21

11

22

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

DRIVER DOOR PIN (-) RED - 04

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH OEM ALARM ONLY.

WITH AUTOLIGHT ONLY.

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) PINK - 01

ACCESSORY (+) PINK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 15

UNLOCK (-) YELLOW/ORANGEOR GREEN - 20

LOCK (-) WHITE/BLACKOR GRAY - 19

PARKING LIGHTS (-) BLUE/BLACKOR BLUE

DISARM (-) BROWN - 09

ARM (-) YELLOW - 08

IMMOBILIZER (DATA) BLUE/BLACKOR BROWN/ORANGE - 06

IGNITION SWITCH (A)

HEADLAMP SWITCH (B)

PASSENGER KICK PANEL (C)

12V (+) RED OR ORANGE - 05

IGNITION (+) ORANGE - 06

TACH (AC) BLUE - 09

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1

1

DRIVER KICK PANEL (D)

1: 20 PIN

1: BLUE/BLACK

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 73: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 74: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 75: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 76: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 77: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2010-2013 Kia Forte StD Key at

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (oPtioNaL)aDS-WLM-aN1/aDS-WLM-aP1 (oPtioNaL)DroNe MoBiLe Dr-2000 (oPtioNaL) CoMPatiBLe rF-Kit (oPtioNaL)

FIRMWAREaDS-HCX(rSt)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 78: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

13A_V1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

E

A

B

C

D

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 79: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

1

1

13A_V1_[W]

12345678910111213

14151617181920212223242526

39 38 37 36 35 34 33 32 31 30 29 28 27

05

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) ORANGE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 20

TRUNK RELEASE (-) BLUE/BLACK - 02

UNLOCK DETECTION (-) BLACK/ORANGE - 02

DISARM KEY UNLOCK (-) BLUE/ORANGE - 06

ARM (-) GREEN/ORANGE - 23

LOCK (-) GREEN - 25

PARKING LIGHT (-) ORANGE - 01

IMMOBILIZER (DATA) LTBLUE/BLACKOR YELLOW/ORANGE - 15

IGNITION SWITCH (A)

PARKING LIGHT SWITCH (C)

DRIVER KICK PANEL (B)

12V (+) BLACK - 05

IGNITION (+) BLUE - 06

TACH (AC) BLUE/RED - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE 13 PIN

1: WHITE 18 PIN CONNECTOR

PASSENGER KICK PANEL (E)

DASH FUSE BOX, REAR VIEW (D)

1: GRAY

1: GRAY 39 PIN

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

UNLOCK (-) YELLOW - 39

DRIVER DOOR PIN (-) RED - 36

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

1

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 80: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 81: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 82: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 83: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 84: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2006-2008 Kia Magentis stD Key at

HARDWAREaDs-HCX

ACCESSORIES aDs-UsB (OPtiOnaL)aDs-WLM-an1/aDs-WLM-aP1 (OPtiOnaL)DROne MOBiLe DR-2000 (OPtiOnaL) COMPatiBLe RF-Kit (OPtiOnaL)

FIRMWAREaDs-HCX(Rst)-HK2-[aDs-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 85: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

06A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 86: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

1110

211

312

413

514

615

716

817

918

16

27

38 9 10

411

512

1

1

1213141516171823242526272829

12345671011

19202122

30313233

89

06A_v1_[W]

15

26 9 10 11 12

37

48

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) BLACK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED - 01

TRUNK RELEASE (-) WHITE/BLACK - 06

UNLOCK/DISARM (-) ORANGE - 17

LOCK/ARM (-) GREEN - 12

PARKING LIGHTS (+) RED - 06

IMMOBILIZER (DATA) YELLOW/ORANGE - 21

IGNITION SWITCH (A)

DASH FUSEBOX, REAR VIEW (B)

DRIVER KICK PANEL (C)

12V (+) PINK - 05

IGNITION (+) GREEN - 06

TACH (AC) YELLOW/BLACK - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

2: BROWN

1: WHITE

3: WHITE 33 PIN

4: BLUE 20 PIN

5: BROWN 20 PIN

2: BLACK

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

1

4

DRIVER DOOR PIN (-) ORANGE/BLACK - 10

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 87: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 88: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 89: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 90: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 91: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2009-2010 Kia Magentis stD Key at

HARDWAREaDs-HCX

ACCESSORIES aDs-UsB (OPtiOnaL)aDs-WLM-an1/aDs-WLM-aP1 (OPtiOnaL)DROne MOBiLe DR-2000 (OPtiOnaL) COMPatiBLe RF-Kit (OPtiOnaL)

FIRMWAREaDs-HCX(Rst)-HK2-[aDs-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 92: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

06A_v2_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 93: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

1

1110

211

312

413

514

615

716

817

918

16

27

38 9 10

411

512

1

1213141516171823242526272829

12345671011

19202122

30313233

89

06A_v2_[W]

15

26 9 10 11 12

37

48

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) BLACK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED - 01

TRUNK RELEASE (-) WHITE/BLACK - 06

LOCK/ARM (-) GREEN - 12

PARKING LIGHTS (+) RED - 06

IMMOBILIZER (DATA) YELLOW/ORANGE - 21

IGNITION SWITCH (A)

DASH FUSEBOX, REAR VIEW (B)

DRIVER KICK PANEL (C)

12V (+) PINK - 05

IGNITION (+) GREEN - 06

TACH (AC) YELLOW/BLACK - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

2: BROWN

1: WHITE

3: WHITE 33 PIN

4: BLUE 20 PIN

5: BROWN 20 PIN

2: BLACK

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

1

4

DRIVER DOOR PIN (-) ORANGE/BLACK - 10

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

UNLOCK DETECTION (-) BROWN/ORANGE - 16

UNLOCK/DISARM (-) ORANGE - 17

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 94: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 95: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 96: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 97: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 98: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2006-2008 Kia Optima StD Key at

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (OptiONaL)aDS-WLm-aN1/aDS-WLm-ap1 (OptiONaL)DRONe mOBiLe DR-2000 (OptiONaL) COmpatiBLe RF-Kit (OptiONaL)

FIRMWAREaDS-HCX(RSt)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 99: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

06A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 100: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

1110

211

312

413

514

615

716

817

918

16

27

38 9 10

411

512

1

1

1213141516171823242526272829

12345671011

19202122

30313233

89

06A_v1_[W]

15

26 9 10 11 12

37

48

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) BLACK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED - 01

TRUNK RELEASE (-) WHITE/BLACK - 06

UNLOCK/DISARM (-) ORANGE - 17

LOCK/ARM (-) GREEN - 12

PARKING LIGHTS (+) RED - 06

IMMOBILIZER (DATA) YELLOW/ORANGE - 21

IGNITION SWITCH (A)

DASH FUSEBOX, REAR VIEW (B)

DRIVER KICK PANEL (C)

12V (+) PINK - 05

IGNITION (+) GREEN - 06

TACH (AC) YELLOW/BLACK - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

2: BROWN

1: WHITE

3: WHITE 33 PIN

4: BLUE 20 PIN

5: BROWN 20 PIN

2: BLACK

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

1

4

DRIVER DOOR PIN (-) ORANGE/BLACK - 10

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 101: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 102: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 103: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 104: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 105: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2009-2010 Kia Optima StD Key at

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (OptiONaL)aDS-WLm-aN1/aDS-WLm-ap1 (OptiONaL)DRONe mOBiLe DR-2000 (OptiONaL) COmpatiBLe RF-Kit (OptiONaL)

FIRMWAREaDS-HCX(RSt)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 106: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

06A_v2_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 107: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

1

1110

211

312

413

514

615

716

817

918

16

27

38 9 10

411

512

1

1213141516171823242526272829

12345671011

19202122

30313233

89

06A_v2_[W]

15

26 9 10 11 12

37

48

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) GREEN - 01

ACCESSORY (+) BLACK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED - 01

TRUNK RELEASE (-) WHITE/BLACK - 06

LOCK/ARM (-) GREEN - 12

PARKING LIGHTS (+) RED - 06

IMMOBILIZER (DATA) YELLOW/ORANGE - 21

IGNITION SWITCH (A)

DASH FUSEBOX, REAR VIEW (B)

DRIVER KICK PANEL (C)

12V (+) PINK - 05

IGNITION (+) GREEN - 06

TACH (AC) YELLOW/BLACK - 05

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

2: BROWN

1: WHITE

3: WHITE 33 PIN

4: BLUE 20 PIN

5: BROWN 20 PIN

2: BLACK

1: BLACK

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

1

4

DRIVER DOOR PIN (-) ORANGE/BLACK - 10

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

UNLOCK DETECTION (-) BROWN/ORANGE - 16

UNLOCK/DISARM (-) ORANGE - 17

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 108: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 109: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 110: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 111: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 112: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2005-2011 Kia Rio STD Key aT

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (oPTioNaL)aDS-WLM-aN1/aDS-WLM-aP1 (oPTioNaL)DRoNe MoBiLe DR-2000 (oPTioNaL) CoMPaTiBLe RF-KiT (oPTioNaL)

FIRMWAREaDS-HCX(RST)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 113: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

05A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

AB

C

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 114: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1

1

1

M3

M1

M2 M5M4

1 2 3

4 5 6

2

205A_v1_[W]

3 4 5 61 2

17 18 19 20

7 8

15 1611 12 13 14

9

10

1 2 3 48 9 10 11

5 6 716 17 1812 13 14 15

10 11 12 13

14 15 16 17 18 19 20 21 22 23 24 25 2627 2928 30 31 32 33 34 35 36 37 38 39

1 2 3 4 5 6 7 8 9

17

28

39

413121110 14

515

616

1

15

29

2

16

30

3

17

31

4

18

32

5

19

33

6

20

34

7

21

35

8

22

36

9

23

37

10

24

38

11

25

39

12

26

40

13

27

41

14

28

42

1

15

29

2

16

30

3

17

31

4

18

32

5

19

33

6

20

34

7

21

35

8

22

36

9

23

37

10

24

38

11

25

39

12

26

40

13

27

41

14

28

42

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

WITH OEM ALARM ONLY.

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) WHITE - 01

ACCESSORY (+) ORANGE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED/ORANGE - 02

UNLOCK (-) YELLOW/BLACK - 16

LOCK (-) BLUE - 06

PARKING LIGHTS (-) PINK/BLACK OR RED - 10

DISARM (-) WHITE/BLACK - 33

ARM (-) YELLOW/ORANGE - 35

IMMOBILIZER (DATA) BLUE/BLACK - 15

IGNITION SWITCH (A)

12V (+) GREEN - 05

IGNITION (+) PINK - 06

TACH (AC) GREEN - 32

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE11 GRAY/RED - IMMO. (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE13 GREEN/RED - IMMO. (DATA) CONNECTOR SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

06 WHITE06 WHITE

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

HEADLAMP SWITCH (D)1: BLUE

FUSEBOX (B)

DRIVER KICK PANEL (C)

1: BLUE

2: GRAY

3: GRAY

4: WHITE

1: GREEN

31

24

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 115: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 116: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 117: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 118: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 119: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2007-2012 Kia Rondo STd Key aT

HARDWAREadS-HCX

ACCESSORIES adS-USB (oPTionaL)adS-WLM-an1/adS-WLM-aP1 (oPTionaL)dRone MoBiLe dR-2000 (oPTionaL) CoMPaTiBLe RF-KiT (oPTionaL)

FIRMWAREadS-HCX(RST)-HK2-[adS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 120: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

07A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

BD

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 121: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

M3

M1

M2 M5M4

1 2 3

4 5 6

1

1

1234567891011121314151617181920212223242526

39404142 38 37 36 35 34 33 32 31 30 2928 27

38

07A_v1_[W]

14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39

1 2 3 4 5 6 7 10 11 12 138 9

2143

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) BLACK/YELLOW OR GREEN - 01

ACCESSORY (+) WHITE OR PINK - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) GREEN - 01

UNLOCK (-) WHITE/BLACK - 09

DISARM (-) BROWN - 02DISARM (-) BROWN - 02

ARM (-) GRAY - 03

LOCK (-) WHITE - 08

PARKING LIGHT (+) YELLOW

IMMOBILIZER (DATA) BROWN - 18

IGNITION SWITCH (A)

DIMMER SWITCH (B)

DRIVER KICK PANEL (C)

12V (+) RED OR PINK - 05

IGNITION (+) WHITE/BLUE OR BLUE - 06

TACH (AC) WHITE - 38

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE 6 PIN

BRAKE SWITCH (D)

1: WHITE

1: BLUE

2: GRAY

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

1

2

LOCK DETECTION (-) YELLOW - 01

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 122: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 123: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 124: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 125: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 126: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2007-2009 Kia Sorento StD Key at

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (oPtionaL)aDS-WLM-an1/aDS-WLM-aP1 (oPtionaL)Drone MoBiLe Dr-2000 (oPtionaL) CoMPatiBLe rF-Kit (oPtionaL)

FIRMWAREaDS-HCX(rSt)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 127: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

08A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

E

C

D

F

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 128: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1 2 3

4 5 6

M3

M1

M2 M5M4

2

1

2

1

1

11

2

12

3

13

4

14

5

15

6

16

7

17

8

18

9

19

10

20

1

14

2

15

3

16

4

17

5

18

6

19

7

20

8

21

9

22

10

23

11

24

12

25

13

26

1

14

2

15

3

16

4

17

5

18

6

19

7

20

8

21

9

22

10

23

11

24

12

25

13

26

87

1817

65

161514131211

43

109

21

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

1 2 3 4 5 6 7 8

9

224

13

1

08A_v1_[W]

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) WHITE - 02

LOCK/ARM (-) GREEN - 17

HATCH GLASS (-) RED/ORANGE - 19

UNLOCK/DISARM (-) ORANGE - 01

DRIVER DOOR PIN (-) BLUE - 11

PARKING LIGHT (+) RED/BLACK - 02

IMMOBILIZER (DATA) GREEN/ORANGEOR GREEN - 15

PASSENGER KICK PANEL (B)

INSTRUMENT CLUSTER (D)

DRIVER KICK PANEL (C)

TACH (AC) GREEN/BLACKOR WHITE - 14

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1

1: WHITE

JUNCTION BOX, DRIVER SIDE (E)1: WHITE

2: BLACK

BRAKE SWITCH (F)1

1

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

1

STARTER (+) RED - 01

ACCESSORY (+) ORANGE - 03

IGNITION SWITCH (A)

12V (+) BLUE - 05

IGNITION (+) YELLOW - 06

1: WHITE

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 129: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 130: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 131: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 132: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 133: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2010-2013 Kia Soul STD Key aT

HARDWAREaDS-HCX

ACCESSORIES aDS-uSB (oPTioNal)aDS-WlM-aN1/aDS-WlM-aP1 (oPTioNal)DRoNe MoBile DR-2000 (oPTioNal) CoMPaTiBle RF-KiT (oPTioNal)

FIRMWAREaDS-HCX(RST)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 134: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

09A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

E

B

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 135: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

87A

30

87

8586

M3

M1

M2 M5M4

1 2 3

4 5 6

2

2

10 11 12 132 3 4 5 6 7 8 91

1

2714

2

2815

3

2916

4

3017

5

3118

6

3219

7

3320

8

3421

9

3522

10

3623

11

3724

12

3825

13

3926

1

1

09A_v1_[W]

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

STARTER (+) BLUE - 01

ACCESSORY (+) WHITE - 03

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED/ORANGE - 01 OR 02

LOCK DETECTION (-) YELLOW - 23

DISARM (-) GRAY - 13

LOCK (-) BROWN

ARM (-) BROWN - 24

PARKING LIGHT (-) PINK - 01

IMMOBILIZER (DATA) BLUE/BLACK - 10

IGNITION SWITCH (A)

PARKING LIGHT SWITCH (B)

DRIVER KICK PANEL (C)

12V (+) WHITE - 05

IGNITION (+) PINK - 06

TACH (AC)

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

1: WHITE

BRAKE SWITCH (D)

INJECTOR (E)

1: WHITE 4 PIN

1: HARNESS IN RUNNING BOARD

2: WHITE 26 PIN

3: WHITE 39 PIN ABOVE KICK PANEL

4

1: WHITE

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

UNLOCK (-) GREEN

4

DRIVER DOOR PIN (-) BROWN - 21

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

WITH AUTOLIGHT ONLY.

2

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 136: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 137: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 138: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 139: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 140: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2006 Kia Spectra StD Key at

HARDWAREaDS-HcX

ACCESSORIES aDS-USB (OptiONaL)aDS-WLM-aN1/aDS-WLM-ap1 (OptiONaL)DrONe MOBiLe Dr-2000 (OptiONaL) cOMpatiBLe rF-Kit (OptiONaL)

FIRMWAREaDS-HcX(rSt)-HK2-[aDS-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 141: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

10A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

BD

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 142: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1 2 3

4 5 6

M3

M1

M2 M5M4

2

1

2

1

10 11

12 13 14 15 16 17 18 19 20 21 22

1 2 3 4 5 6 7 8 9

10A_v1_[W]

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED/BLACK - 01

LOCK (-) YELLOW/ORANGE - 10

TRUNK RELEASE (-) BROWN - 06

UNLOCK (-) YELLOW/BLACK - 09

DISARM (-) BLUE/BLACK - 08

DRIVER DOOR PIN (-) GREEN/BLACK - 15

PARKING LIGHT (-) GREEN - 10

IMMOBILIZER (DATA) GREEN - 14

CENTER CONSOLE (B)

TACH (AC) BLUE/ORANGEOR YELLOW/ORANGE - 11

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

BCM/DASH FUSEBOX (C)

BRAKE SWITCH (D)1

1

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

STARTER (+) RED - 01

ACCESSORY (+) YELLOW - 03

IGNITION SWITCH (A)

12V (+) PINK - 05

IGNITION (+) ORANGE - 06

1: WHITE

2: WHITE 22 PIN

2: GREEN 16 PIN

3: BLACK 16 PIN

4: BROWN 16 PIN

1: GRAY 16 PIN

1

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 143: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 144: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 145: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 146: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 147: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2007-2009 Kia Spectra StD Key at

HARDWAREaDS-HcX

ACCESSORIES aDS-USB (OptiONaL)aDS-WLM-aN1/aDS-WLM-ap1 (OptiONaL)DrONe MOBiLe Dr-2000 (OptiONaL) cOMpatiBLe rF-Kit (OptiONaL)

FIRMWAREaDS-HcX(rSt)-HK2-[aDS-HcX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 148: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

10A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

BD

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 149: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1 2 3

4 5 6

M3

M1

M2 M5M4

2

1

2

1

10 11

12 13 14 15 16 17 18 19 20 21 22

1 2 3 4 5 6 7 8 9

10A_v1_[W]

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED/BLACK - 01

LOCK (-) YELLOW/ORANGE - 10

TRUNK RELEASE (-) BROWN - 06

UNLOCK (-) YELLOW/BLACK - 09

DISARM (-) BLUE/BLACK - 08

DRIVER DOOR PIN (-) GREEN/BLACK - 15

PARKING LIGHT (-) GREEN - 10

IMMOBILIZER (DATA) GREEN - 14

CENTER CONSOLE (B)

TACH (AC) BLUE/ORANGEOR YELLOW/ORANGE - 11

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

BCM/DASH FUSEBOX (C)

BRAKE SWITCH (D)1

1

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

STARTER (+) RED - 01

ACCESSORY (+) YELLOW - 03

IGNITION SWITCH (A)

12V (+) PINK - 05

IGNITION (+) ORANGE - 06

1: WHITE

2: WHITE 22 PIN

2: GREEN 16 PIN

3: BLACK 16 PIN

4: BROWN 16 PIN

1: GRAY 16 PIN

1

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 150: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 151: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 152: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 153: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215

Page 154: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

REVISION DATE20151215

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

INSTALL GUIDE2005-2010 Kia Sportage 2.0L StD Key at

HARDWAREaDS-HCX

ACCESSORIES aDS-USB (optioNaL)aDS-WLM-aN1/aDS-WLM-ap1 (optioNaL)DroNe MoBiLe Dr-2000 (optioNaL) CoMpatiBLe rF-Kit (optioNaL)

FIRMWAREaDS-HCX(rSt)-HK2-[aDS-HCX]

www.idatalink.comAutomotive Data Solutions Inc. © 2015

Page 155: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

11A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

FB

E

C

D

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 2 OF 7• 20151215

Page 156: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

!!

1 2 3

4 5 6

M3

M1

M2 M5M4

2

1

2

1

1

10

11 12 13 14 15 16 17 18 19 20 21 22 23

1 2 3 4 5 6 7 8 9

1

24

13

17

28

39 10 11

412

513

614

11A_v1_[W]

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

BRAKE (+) RED - 01

LOCK/ARM (-) BROWN - 14

UNLOCK/DISARM (-) PINK - 07

DRIVER DOOR PIN (-) BLUE

PARKING LIGHTS (-) BROWN - 14

IMMOBILIZER (DATA) BLUE/BLACK - 14

HEADLAMP SWITCH (C)

TACH (AC) BLUE - 66 (4 CYL)OR 17 (6 CYL)

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - AUTOLIGHT OFF (-) OUTPUT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY

12 GRAY/YELLOW12 GRAY/YELLOW

14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

DRIVER KICK PANEL (B)

BRAKE SWITCH (E)1

PASSENGER KICK PANEL (F)1: WHITE

1: WHITE 18 PIN

ECM, ABOVE DRIVER KICK PANEL (D)(OR BEHIND INSTRUMENT CLUSTER)1: 81 PIN

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITH AUTOLIGHT ONLY.

STARTER (+) GREEN - 01

ACCESSORY (+) ORANGE - 03

IGNITION SWITCH (A)

12V (+) WHITE - 05

IGNITION (+) BLUE - 06

1: WHITE

2: HARNESS IN RUNNING BOARD

1: YELLOW

11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE11 GRAY/RED - IMMO. (DATA) CONNECTOR SIDE

13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE13 GREEN/RED - IMMO. (DATA) VEHICLE SIDE

06 WHITE06 WHITE

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 3 OF 7• 20151215

Page 157: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04

05OFF

ACC ONSTART

06OFF

ACC ONSTART

07

08

09

10

11

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to ON position.

Wait, LED 1 will fl ash RED and GREEN. This may take up to 3 minutes.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 4 OF 7• 20151215

Page 158: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.

Insert key into ignition.

Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 5 OF 7• 20151215

Page 159: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?

YES: Go to next step.

¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨

Question 10: Does the vehicle shut down?

YES: Go to next step.

¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 6 OF 7• 20151215

Page 160: PRoDuct guiDe - Cloud Object Storagecdncontent2.idatalink.com/corporate/Content/Manuals/RST... · 2020-02-12 · u.s. patent no. 8,856,780 module pinout - 1 of 1 7 9 3 10 8 6 4 2

U.S. Patent No. 8,856,780

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 1: Does the vehicle remote start?

YES: Go to next step.

¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨

Question 2: Does the vehicle shut down?

YES: Go to next step.

¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

¨¨

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-HK2-[ADS-HCX]-EN

PAGE 7 OF 7• 20151215