product guide - earthworm · 2017. 2. 15. · business operations. auger torque’s six...
TRANSCRIPT
-
ISSUE 12-1AUGER TORQUE EUROPE LTD
www.augertorque.co.nz
PRODUCT GUIDENEW ZEALAND
-
A Customer-DrivenGlobal CompanyEstablished in Europe in 1998, Auger Torque has created a newstandard in the Earth Drill and Trencher Attachment market by putting you, the customer, at the centre of everything we do.
In 2005, after surveying the market carefully, we released a new range of innovative products, designed to provide unrivalled reliability and cost effective operation.
Auger Torque is proud to have become part of the Kinshofer Group ofcompanies in 2015. With the backing of the German attachments giantAuger Torque has since enjoyed even greater growth in all areas of its business operations.
Auger Torque’s six manufacturing bases around the globe are busy satisfying the ever-growing demand for high-quality products in over seventy countries and on all seven continents.
Auger Torque - A manufacturing company with Global distribution and dealer networks.
www.augertorque.co.nz2
Auger Torque Europe
Auger Torque China
Auger Torque Australia
-
INDEX
EARTH DRILLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AUGERS & WEAR PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
TCH AUGER RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
TRUCK CRANES & ROPE WIND HITCH . . . . . . . . . . . . . . . . . . . . . . . . . . 38
XHT SCREW PILE TORQUE HEADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
ALIGNMENT MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
TORQUE MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
TRENCHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SWEEPER BROOMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
HEDGE TRIMMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PALLET FORKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
MIXER BOWLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
STUMP PLANERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
3
-
InnovatioNon-Dislodgement ShaftSECURITY
Unique designSingle piece drive shaft Lifetime warranty against shaft dislodgement
Planetary GearboxPOWER
Designed, manufactured and assembled by Auger TorqueTorque amplifiedHigh efficiency Extreme durability
Innovation and Special Features
Robust ConstructionDURABILITY
Manufactured from high grade materials and precision engineered componentsDesigned to withstand extremeworking conditionsHigh grade synthetic gear oil used for extra protection and long service life
www.augertorque.co.nz4
PilotsTOUGHNESS & ACCURACY
Earth, Tungsten, Extra Dig and Rock PilotsTough forged construction
y gEasy fitting
Pilot ExtensionsACCURACY
Allows an auger to hold its axis accurately in tough ground conditionsImproves performance on sloping groundSimple fitting
Shallow Pitch FlightsEFFICIENCY
Piling industry technologyHolds earth on flights on removalMost efficient ratio between quantity of earth removed and speed of operation
Telescopic ExtensionsADAPTABILITY
Improves efficiency for deep hole drilling Innovative design significantly reduces swap-over timeEasy adjustment to 3 heightsAvailable for S5, S6 and PA augers
Constant Spiral CutIMPROVED PRODUCTIVITY
Fresh cut every revolutionTooth holders angled to direct spoil onto auger flights efficientlySpoil broken up thoroughlyAvoids clogging
-
FeaturesPressure Relief ValveSAFETY
Helps prevent overloading of the hydraulic circuiteesesP h h d li
2 Way Valve KitsFLEXIBILITY
Converts single acting hammer circuit into a2 way auxiliary flow circuit
5
Modular Cradle HitchINGENUITY
2 hitches in 1Unique design converts a eaeaDouble Pin Hitch into a Doubleeeeeaeaee
Sometimes it’s the simple ideas that work best and Auger Torque has always led the industry with creative design. In a world where maximising profit is vital to any business, we believe that our range of high quality attachments will allow you to exploit the full potential of your existing plant.
-
Designed
www.augertorque.co.nz6
Designed for Your Environment
EARTH DRILLS TRENCHERS
Applications include:
Fencing
Landscaping
Tree planting
Well boring
Foundation piles
Screw pile installations
sGround source heat pump
nsPole and mast installation
Road signage
Sound barriers
Exploration and research
Applications include:
Drainage
Irrigation
Ground source heat pumps
Fibre optic installations
Electric cable installations
Narrow strip foundations
Gas and water piping
Quality is at the forefront of our philosophy. All of our gearboxes use precision engineered components.
the latestNew products featuring we are able totechnology ensure that wy.maximise your efficienc
Our R&D Test Facility puts our attachmentsthrough rigorous test procedures thatexceed real-life demands.
Our products incorporate manydevelopment features. The trench cleaner on our Trencher Attachments ensures agood clean cut with no residual spoil.
gngngngngngngngngngngngn. industry world-wide
-
“Don’t leave your teeth
down the hole!”
“Don’t leave your teeth
down the hole!””
Tooth Locking System
7
Recognised as the ONLY tooth locking system that works!Are you tired of losing your teeth down the hole?A
With our patentedW Shock Lock™ Tooth Locking System this is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against Ashock fractures. s
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth willslide out of the pocket with ease. s
Acclaimed as the best system on the market you will never need Ato worry about fitting spare teeth due to loss again.t
International Patents:British Patent: 2404935
European Patent: 1507061
German Patent: 60 2004 009 250-9
Australian Patent: 2004203825
Canadian Patent: 2478443
US Patent: 7383901Patented Design
-
www.augertorque.co.nz
EARTH DRILLSFeatures of our Earth Drills
FORGED HOOD EARS
Standard with all Earth Drills in areasthat we know will take a lot of strain.All hood pins are locked for extra safety making it impossible for thehood to detach from your hitch.
HOSE & COUPLER OPTIONS
All Earth Drills come standard with high quality hoses and couplers(excludes larger units).
HIGH QUALITY HYDRAULIC MOTORS
Auger Torque’s huge buying power means we work closely with high quality suppliers to develop the mostreliable attachments available on the market today.
EPICYCLIC GEARBOX
Torque is amplified by using the unique Auger Torque planetary gearbox. Thissystem allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
NON-DISLODGEMENT SHAFT
Unique to Auger Torque, the Non-Dislodgement Shaft is a single piecedrive shaft assembled top down and locked into the Earth Drill housing.This design guarantees that the shaft will never fall out, making for a saferwork environment, not only for theoperator but also any surroundingworkers, a MUST-HAVE FEATURE for any safety conscious company.
8
-
9
-
www.augertorque.co.nz
MINI EXCAVATORS 1 - 2.5 TS4 AUGERS 100mm-450mm Dia
Torque Range: 639-2,190 NmOil Pressure Range: 70-240 Bar
Oil Flow Range: 25-57 lpmSpeed Range: 43-99 rpm
Unit Height: 585 mmUnit Diameter: 200 mmUnit Weight: 47 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MINI EXCAVATORS 1.5 - 3 TS4 AUGERS 100mm-500mm Dia
Torque Range: 830-2,847 NmOil Pressure Range: 70-240 Bar
Oil Flow Range: 27-65 lpmSpeed Range: 36-87 rpm
Unit Height: 585 mmUnit Diameter: 200 mmUnit Weight: 48 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MINI EXCAVATORS 1 - 2 TS4 AUGERS 100mm-400mm Dia
Torque Range: 511-1,496 NmOil Pressure Range: 70-205 Bar
Oil Flow Range: 20-45 lpmSpeed Range: 44-98 rpm
Unit Height: 585 mmUnit Diameter: 200 mmUnit Weight: 46 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MINI EXCAVATORS 2 - 4 TS4 AUGERS 100mm-600mm Dia
Torque Range: 959-2,877 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 27-75 lpmSpeed Range: 36-100 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 71 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
2” Hex65mm Round
57mmSquare
Double Pin Cradle Hitch
Double Pin Hitch
Single Pin Hitch
2” Hex65mm Round
57mm Square
Double PinCradle Hitch
Double Pin Hitch
Single Pin Hitch
2” Hex65mm Round
57mm Square
Double PinCradle Hitch
Double Pin Hitch
Single Pin Hitch
2” Hex65mmRound
57mm Square
Double Pin Cradle Hitch
Double Pin Hitch
Single Pin Hitch
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
10
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2M 1.8M 1.6M
150 2M 1.8M 1.6M
200 1.8M 1.6M 1.4M
225 1.8M 1.6M 1.4M
250 1.5M 1.4M 1.3M
300 1.5M 1.4M 1.3M
350 1.5M 1.4M 1.3M
375 1.5M 1.4M 1.3M
400 1.2M 1.1M 1M
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2.2M 2M 1.8M
150
200
225
250
300 2.2M 2M 1.8M
350 2M 1.8M 1.6M
375 1.8M 1.6M 1.4M
400 1.5M 1.4M 1.3M
450 1.2M 1.1M 1M
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2.5M 2.3M 2.1M
150
200
225
250
300 2.5M 2.3M 2.1M
350 2.3M 2.1M 1.9M
375 2.1M 1.9M 1.7M
400 1.9M 1.7M 1.5M
450 1.7M 1.5M 1.4M
500 1.5M 1.4M 1.3M
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 3M 2.7M 2.4M
150
200
225
250
300
350
375
400 3M 2.7M 2.4M
450 2.6M 2.3M 2.1M
500 2.3M 2.1M 1.9M
550 2M 1.8M 1.6M
600 1.8M 1.6M 1.4M
-
S4 AUGERSAuger Torque S4 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Extra Dig variations are available.Available in the following diameters:
100mm150mm200mm225mm250mm
300mm350mm375mm400mm450mm
500mm550mm600mm700mm750mm
800mm900mm
SHALLOW PITCH FLIGHTS
EXTRA-LONGFLIGHTLENGTHS
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
SHOWN:S4 100mm Dia,1.2M Length**Shock LockTMkk
SHOWNSHOWN:S4 900mm Dia, 1.2M Length**Shock LockTMkk
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
** Auger lengths stated include fitted wear parts.
S4 EXTENSIONSS4 Auger Extensions are available in thefollowing lengths:
500mm 800mm1M 1.2M
SHOWN:S4 1.2M Extension
11
MINI EXCAVATORS 2.5 - 4.5 TS4 AUGERS 100mm-750mm Dia
Torque Range: 1,205-3,614 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 40-85 lpmSpeed Range: 42-90 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 73 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MINI EXCAVATORS 3 - 5 TS4 AUGERS 100mm-900mm Dia
Torque Range: 1,500-4,499 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 50-95 lpmSpeed Range: 43-81 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 75 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MIN
I EXC
AVAT
OR
S 1
- 5
TON
NES
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
2” Hex65mm Round
57mm SquareDouble Pin Cradle Hitch
Double Pin Hitch
Single Pin Hitch
2” Hex65mmRound
57mmSquareDouble Pin Cradle Hitch
Double Pin Hitch
Single Pin Hitch
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 3M 2.7M 2.4M
150
200
225
250
300
350
375
400
450
500
550 3M 2.7M 2.4M
600 2.9M 2.6M 2.3M
700 2.3M 2.1M 1.9M
750 1.8M 1.6M 1.4M
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 4M 3.6M 3.2M
150
200
225
250
300
350
375
400
450
500
550
600 4M 3.6M 3.2M
700 3M 2.7M 2.4M
750 2.5M 2.3M 2.1M
800 2M 1.8M 1.6M
900 1.5M 1.4M 1.3M
-
MINI LOADERS S4 AUGERS 100mm-400mm Dia
Torque Range: 511-1,496 NmOil Pressure Range: 70-205 Bar
Oil Flow Range: 20-45 lpmSpeed Range: 44-98 rpm
Unit Height: 406 mmUnit Width: 205 mmUnit Weight: 38 kg
Mounting Frame: 2 Way Swing4 Way Swing
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
2” Hex65mm Round
m 57mmreSquar
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2M 1.8M 1.6M
150 2M 1.8M 1.6M
200 1.8M 1.6M 1.4M
225 1.8M 1.6M 1.4M
250 1.5M 1.4M 1.3M
300 1.5M 1.4M 1.3M
350 1.5M 1.4M 1.3M
375 1.5M 1.4M 1.3M
400 1.2M 1.1M 1M
MINI LOADERS S4 AUGERS 100mm-500mm Dia
Torque Range: 830-2,847 NmOil Pressure Range: 70-240 Bar
Oil Flow Range: 27-65 lpmSpeed Range: 36-87 rpm
Unit Height: 465 mmUnit Width: 205 mmUnit Weight: 40 kg
Mounting Frame: 2 Way Swing4 Way Swing
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MINI LOADERS S4 AUGERS 100mm-450mm Dia
Torque Range: 639-2,190 NmOil Pressure Range: 70-240 Bar
Oil Flow Range: 25-57 lpmSpeed Range: 43-99 rpm
Unit Height: 465 mmUnit Width: 205 mmUnit Weight: 40 kg
Mounting Frame: 2 Way Swing4 Way Swing
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
SKIDSTEER LOADERS LOW FLOW UP TO 50 HPS4 AUGERS 100-600mm Dia
Torque Range: 959-2,877 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 27-75 lpmSpeed Range: 36-100 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 71 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
www.augertorque.co.nz*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
2” Hex65mm Round
m 57mmreSquar 2” Hex
65mm Round
m 57mmreSquar
2” Hex65mm Round
m 57mmreSquar
Side Shift Frame
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2.5M 2.3M 2.1M
150
200
225
250
300 2.5M 2.3M 2.1M
350 2.3M 2.1M 1.9M
375 2.1M 1.9M 1.7M
400 1.9M 1.7M 1.5M
450 1.7M 1.5M 1.4M
500 1.5M 1.4M 1.3M
2 Way Swing Frame
4 Way Swing Frame
2 Way Swing Frame
4 Way Swing Frame
2 Way Swing Frame
4 Way Swing Frame
12
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 3M 2.7M 2.4M
150
200
225
250
300
350
375
400 3M 2.7M 2.4M
450 2.6M 2.3M 2.1M
500 2.3M 2.1M 1.9M
550 2M 1.8M 1.6M
600 1.8M 1.6M 1.4M
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 2.2M 2M 1.8M
150
200
225
250
300 2.2M 2M 1.8M
350 2M 1.8M 1.6M
375 1.8M 1.6M 1.4M
400 1.5M 1.4M 1.3M
450 1.2M 1.1M 1M
-
SKIDSTEER LOADERS LOW FLOW UP TO 65 HPS4 AUGERS 100mm-750mm Dia
Torque Range: 1,205-3,614 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 40-85 lpmSpeed Range: 42-90 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 73 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
SKIDSTEER LOADERS LOW FLOW UP TO 80 HPS4 AUGERS 100mm-900mm Dia
Torque Range: 1,500-4,499 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 50-95 lpmSpeed Range: 43-81 rpm
Unit Height: 665mmUnit Diameter: 244mmUnit Weight: 75 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 65mm RoundOutput Shaft Opt: 2” Hex
57mm Square
MIN
I LOA
DER
S &
SK
IDST
EER
LOA
DER
S U
P TO
80H
P
2” Hex65mm Round
57mmeSquare 2” Hex
65mm Round
m 57mmreSquar
S4 AUGERSAuger Torque S4 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Extra Dig variations are available.Available in the following diameters:
100mm150mm200mm225mm250mm
300mm350mm375mm400mm450mm
500mm550mm600mm700mm750mm
800mm900mm
S4 EXTENSIONSS4 Auger Extensions are available in thefollowing lengths:
500mm 800mm1M 1.2M
SHOWN:S4 1.2M Extension
SHALLOW PITCH FLIGHTS
EXTRA-LONGFLIGHTLENGTHS
SHOWN:S4 100mm Dia, 1.2M Length**Shock LockTMkk
SHOWNSHOWN:S4 900mm Dia, 1.2M Length**Shock LockTMkk
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Side Shift Frame Side Shift Frame
** Auger lengths stated include fitted wear parts.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
13
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 4M 3.6M 3.2M
150
200
225
250
300
350
375
400
450
500
550
600 4M 3.6M 3.2M
700 3M 2.7M 2.4M
750 2.5M 2.3M 2.1M
800 2M 1.8M 1.6M
900 1.5M 1.4M 1.3M
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 3M 2.7M 2.4M
150
200
225
250
300
350
375
400
450
500
550 3M 2.7M 2.4M
600 2.9M 2.6M 2.3M
700 2.3M 2.1M 1.9M
750 1.8M 1.6M 1.4M
-
TRUCK CRANES TO15 T / METRES5 AUGERS 150-800mm Dia
Torque Range: 1,685-5,477 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 15-50 lpmSpeed Range: 11-38 rpm
Unit Height: 780 mmUnit Diameter: 269 mm
108 kg
Rope Wind Hitch
Std: 75mm SquareOpt: 2.5” Hex
TRUCK CRANES9-18 T / METRES5 AUGERS 150mm-1M Dia
Torque Range: 2,098-6,819 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 15-50 lpmSpeed Range: 9-30 rpm
Unit Height 780 mmr: 269 mm
110 kg
Rope Wind Hitch
Std: 75mm SquareOpt: 2.5” Hex
TRUCK CRANES TO9 T / METRES4 AUGERS 100mm-600mm Dia
Torque Range: 959-3,116 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 5-35 lpmSpeed Range: 7-46 rpm
Unit Height: 665mmr: 244mm
73 kg
Rope Wind Hitch
Std: 65mm RoundOpt: 2” Hex
57mm Square
www.augertorque.co.nz
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
UniU t DiameterrUniUnit Wt Weigeight:ht:
Hitch:
Output Shaft SOutput Shaft O
Unit DiameterrUniUnit Wt Weigeight:h
Hittch:
Output Shaft SOutput Shaft O
Unit Height: UniUnit Dt DiamiameteeterrUniUnit Wt Weigeight:ht:
Hitch:
Output Shaft SOutput Shaft O
Rope Wind HitchRope Wind Hitch
Rope Wind Hitch
2” Hex65mm Round
m 57mmreSquar
75mm Square
2.5” Hex
75mm Square
2.5” Hex
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
14
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 5M 4.5M 4.1M
200
225
250
300
350
375
400
450
500 5M 4.5M 4.1M
550 4M 3.6M 3.2M
600 4M 3.6M 3.2M
700 4M 3.6M 3.2M
750 3.5M 3.2M 2.9M
800 3M 2.7M 2.4M
900 2.5M 2.3M 2.1M
1000 2M 1.8M 1.6M
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 4M 3.6M 3.2M
200
225
250
300
350
375
400
450
500
550
600 4M 3.6M 3.2M
700 3.5M 3.2M 2.9M
750 3M 2.7M 2.4M
800 2.5M 2.3M 2.1M
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
100 3M 2.7M 2.4M
150
200
225
250
300
350
375
400 3M 2.7M 2.4M
450 2.5M 2.3M 2.1M
500 2M 1.8M 1.6M
550 1.8M 1.6M 1.4M
600 1.5M 1.4M 1.3M
-
S5 AUGERS FOR THE 5500TC AND 7000TCAuger Torque S5 Augers feature extra long flighted sections of shallow pitch flights. Earth, Tungsten and Rock variations are available.Available in the following diameters:
150mm200mm225mm250mm300mm
350mm375mm400mm450mm500mm
550mm600mm700mm750mm800mm
900mm1M
S5 EXTENSIONSAvailable in thefollowing lengths:1M 1.5M2M
S5 TELESCOPICAvailable in thefollowing lengths:1.5M 2M
SHALLOW PITCH FLIGHTS
SHALLOW PITCH FLIGHTS
EXTRA-LONGFLIGHTLENGTHS
TRU
CK C
RAN
ES
S4 AUGERS FOR THE 3000TCAuger Torque S4 Augers feature extra long flighted sections of shallow pitch flights. Earth, Tungsten and Extra Dig variations are available.Available in the following diameters:
100mm150mm200mm225mm250mm
300mm350mm375mm400mm450mm
500mm550mm600mm
S4 EXTENSIONSS4 Auger Extensions are available in thefollowing lengths:
500mm800mm1M1.2M
SHOWN:ExtensionS5 1.5M E
TelescopicS5 1.5M T
SHOWN:S5 150mm Dia, 1.5M LengthShock LockTMkkRock Augers are also available.
SHOWN:S5 1000mm Dia, 1.5M Length Shock LockTMkkRock Augers are also available.
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Augers shown feature Shock LockTM Toothholders. Rock Teeth Augers are also available.
SHOWN:S4 1.2M Extension
SHALLOW PITCH FLIGHTS
EXTRA-LONGFLIGHTLENGTHS
SHOWN:S4 100mm Dia,1.2M Length**Shock LockTMkk
SHOWNSHOWN:S4 900mm Dia,1.2M Length**Shock LockTMkk
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
** Auger lengths statedinclude fitted wear parts.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
15
-
EXCAVATORS 5 - 7 T
BACKHOESS5 AUGERS 150mm-900mm Dia
Torque Range: 2,133-6,931 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 60-135 lpmSpeed Range: 36-81 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 112 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: 2 Way Valve
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
EXCAVATORS 6 - 8 T
BACKHOESS5 AUGERS 150mm-1.2M Dia
Torque Range: 2,717-8,152 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 70-150 lpmSpeed Range: 33-70 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 116 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: 2 Way Valve
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
www.augertorque.co.nz
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
75mm Square
2.5” Hex 75mm Square
2.5” Hex75mm Square
2.5” Hex
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
Cradle Hitch tchSingle Pin Hit
Double Pin Hitch
Cradle Hitch tchSingle Pin Hit
Double Pin Hitch
Cradle Hitch HitchSingle Pin H
Double Pin Hitch
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
EXCAVATORS 4.5 - 6 TS5 AUGERS 150mm-750mm Dia
Torque Range: 1,685-5,477 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 40-115 lpmSpeed Range: 30-87 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 108 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: 2 Way Valve
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
16
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 4M 3.6M 3.2M
200
225
250
300
350
375
400
450
500
550
600 4M 3.6M 3.2M
700 3.5M 3.2M 2.9M
750 3M 2.7M 2.4M
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 5M 4.5M 4.1M
200
225
250
300
350
375
400
450
500 5M 4.5M 4.1M
550 4M 3.6M 3.2M
600 4M 3.6M 3.2M
700 4M 3.6M 3.2M
750 3.5M 3.2M 2.9M
800 3M 2.7M 2.4M
900 2.5M 2.3M 2.1M
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 6M 5.4M 4.9M
200
225
250
300
350
375
400 6M 5.4M 4.9M
450 5M 4.5M 4.1M
500 5M 4.5M 4.1M
550 5M 4.5M 4.1M
600 5M 4.5M 4.1M
700 4.5M 4.1M 3.7M
750 4M 3.6M 3.2M
800 4M 3.6M 3.2M
900 3.5M 3.2M 2.9M
1000 3.5M 3.2M 2.9M
1200 3M 2.7M 2.4M
-
S5 AUGERSAuger Torque S5 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Rock variations are available.Available in the following diameters:
150mm200mm225mm250mm300mm
350mm375mm400mm450mm500mm
550mm600mm700mm750mm800mm
900mm1M1.2M
S5 EXTENSIONSAvailable in the following lengths:1M 1.5M2M
S5 TELESCOPICAvailable in the following lengths:1.5M 2M
SHALLOW PITCH FLIGHTS
SHALLOW PITCH FLIGHTS
EXTRA-LONGFLIGHTLENGTHS
SHOWN:onS5 1.5M Extensio
picS5 1.5M Telescop
SHOWN:S5 150mm Dia,1.5M LengthShock LockTMkkRock Augers aree also available.
SHOWN:S5 1M Dia, 1.5M Length Shock LockTMkkRock Augers are also available.
EXCA
VATO
RS
4.5
- 8
TON
NES
& B
ACK
HO
ES
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Augers shown feature Shock LockTM Toothholders. Rock Teeth Augers are also available.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
17
-
SKIDSTEER LOADERSHIGH FLOWUP TO 135 LPM
TELEHANDLERS5 - 8 TS5 AUGERS 150mm-900mm Dia
Torque Range: 2,133-6,931 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 60-135 lpmSpeed Range: 36-81 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 112 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
SKIDSTEER LOADERSHIGH FLOWUP TO 100 HP
TELEHANDLERS 4.5 - 7 TS5 AUGERS 150mm-750mm Dia
Torque Range: 1,685-5,477 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 40-115 lpmSpeed Range: 30-87 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 108 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
SKIDSTEER LOADERSHIGH FLOWUP TO 150 LPMS5 AUGERS 150mm-1.2M Dia
Torque Range: 2,717-8,152 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 70-150 lpmSpeed Range: 33-70 rpm
Unit Height: 780mmUnit Diameter: 269mmUnit Weight: 116 kg
Mounting Frame: Fixed Centre CradleSide Shift Cradle
Output Shaft Std: 75mm SquareOutput Shaft Opt: 2.5” Hex
www.augertorque.co.nz
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
75mm Square
2.5” Hex 75mm Square
2.5” Hex 75mmSquare
2.5” Hex
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
18
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 4M 3.6M 3.2M
200
225
250
300
350
375
400
450
500
550
600 4M 3.6M 3.2M
700 3.5M 3.2M 2.9M
750 3M 2.7M 2.4M
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 5M 4.5M 4.1M
200
225
250
300
350
375
400
450
500 5M 4.5M 4.1M
550 4M 3.6M 3.2M
600 4M 3.6M 3.2M
700 4M 3.6M 3.2M
750 3.5M 3.2M 2.9M
800 3M 2.7M 2.4M
900 2.5M 2.3M 2.1M
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 6M 5.4M 4.9M
200
225
250
300
350
375
400 6M 5.4M 4.9M
450 5M 4.5M 4.1M
500 5M 4.5M 4.1M
550 5M 4.5M 4.1M
600 5M 4.5M 4.1M
700 4.5M 4.1M 3.7M
750 4M 3.6M 3.2M
800 4M 3.6M 3.2M
900 3.5M 3.2M 2.9M
1000 3.5M 3.2M 2.9M
1200 3M 2.7M 2.4M
-
S5 AUGERSAuger Torque S5 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Rock variations are available.Available in the following diameters:
150mm200mm225mm250mm300mm
350mm375mm400mm450mm500mm
550mm600mm700mm750mm800mm
900mm1M1.2M
S5 EXTENSIONSAvailable in the following lengths:1M 1.5M2M
S5 TELESCOPICAvailable in the following lengths:1.5M 2M
EXTRA-LONGFLIGHTLENGTHS
on
pic
SHOWN:S5 150mm Dia,1.5M LengthShock LockTMkkRock Augers arealso available.
HIG
H F
LOW
SK
IDST
EER
LOA
DER
S &
TEL
EHAN
DLE
RS
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Augers shown feature Shock LockTM Toothholders. Rock Teeth Augers are also available.
SHALLOW PITCH FLIGHTSG
SHOWN:S5 1.5M Extensio
S5 1.5M Telescop
e
SHALLOW PITCH FLIGHTS
SHOWN:S5 1M Dia,1.5M Length Shock LockTMkkRock Augers are also available.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
19
-
EXCAVATORS 10 - 15 TS6 AUGERS 150mm-1.2M Dia
que Range:Torq 5,024-15,071 NmPressure Range: Oil P 80-240 Bar
Flow Range:Oil F 80-170 lpmeed Range: Spe 20-43 rpm
t Height:Unit 930mmt Diameter: Unit 290mmt Weight: Unit 173 kg
ch Options:Hitc Single Pin HitchDouble Pin HitchCradle Hitch
ional Extras:Opti Pressure Relief Valve2 Way Valve
put Shaft Std: Outp 75mm Square
e Pin HitchSingle
75mm Square
Double PinCradle Hitch
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
Bolt On Pressure Relief Valve
Double Pin Hitch
BACKHOESS6 AUGERS 150mm-1.2M Dia
Torque Range: 5,024-15,071 NmOil Pressure Range: 80-240 Bar
Oil Flow Range: 70-150 lpmSpeed Range: 18-38 rpm
Unit Height: 883mmUnit Diameter: 290mmUnit Weight: 165 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: 2 Way Valve
Output Shaft: 75mm Square
BACKHOESS6 AUGERS 150mm-900mm Dia
Torque Range: 3,281-10,662 NmOil Pressure Range: 80-260 Bar
Oil Flow Range: 70-150 lpmSpeed Range: 27-58 rpm
Unit Height: 883mmUnit Diameter: 290mmUnit Weight: 162 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: 2 Way Valve
Output Shaft: 75mm Square
www.augertorque.co.nz
75mm Square
75mm Square
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
2 Way Valve2 W V lConverts single acting hammer
circuit into 2 Way auxiliary flow
Double Pin Hitch
Single Pin Hitch
Double Pin Cradle Hitch
Single Pin Hitch
Double PinCradle Hitch
Double Pin Hitch
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
20
GU
IDE
TOD
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 7.5M 6.8M 6.1M
200
225
250
300
350
375
400 7.5M 6.8M 6.1M
450 7M 6.3M 5.7M
500 7M 6.3M 5.7M
550 7M 6.3M 5.7M
600 7M 6.3M 5.7M
700 6.5M 5.9M 5.3M
750 6M 5.4M 4.9M
800 6M 5.4M 4.9M
900 5.5M 5M 4.5M
1000 5M 4.5M 4.1M
1200 4.5M 4.1M 3.7M
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 6.5M 5.9M 5.3M
200
225
250
300
350
375
400 6.5M 5.9M 5.3M
450 6M 5.4M 4.9M
500 6M 5.4M 4.9M
550 6M 5.4M 4.9M
600 6M 5.4M 4.9M
700 5.5M 5M 4.5M
750 5M 4.5M 4.1M
800 5M 4.5M 4.1M
900 4M 3.6M 3.2M
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 7.5M 6.8M 6.1M
200
225
250
300
350
375
400 7.5M 6.8M 6.1M
450 7M 6.3M 5.7M
500 7M 6.3M 5.7M
550 7M 6.3M 5.7M
600 7M 6.3M 5.7M
700 6.5M 5.9M 5.3M
750 6M 5.4M 4.9M
800 6M 5.4M 4.9M
900 5.5M 5M 4.5M
1000 5M 4.5M 4.1M
1200 4.5M 4.1M 3.7M
-
S6 AUGERSAuger Torque S6 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Rock variations are available.Available in the following diameters:
150mm200mm225mm250mm
300mm350mm375mm400mm
450mm500mm550mm600mm
700mm750mm800mm900mm
1M1.2M
S6 EXTENSIONSAvailable in thefollowing lengths:1.5M 2M 2.5M 3M
EXTRA-LONGFLIGHTLENGTHS
SHOWN:S6 150mm Dia, 1.88M LengthShock LockTMkkRock Augers are also available.
SHALLOW PITCH FLIGHTS
SHOWN:ensionS6 1.5M Exte
SHOWN:S6 1.2M Dia, 1.88M Length Shock LockTMkkRock Augers are also available.
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Augers shown feature Shock LockTM Toothholders. Rock Teeth Augers are also available.
EXCA
VATO
RS
8 -
15
TON
NES
& B
ACK
HO
ES
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
21
-
22
EXCAVATORS 13 - 20 TS6 AUGERS 150mm-1.2M Dia
Torque Range: 13,043-19,564 NmOil Pressure Range: 160-240 Bar
Oil Flow Range: 80-170 lpmSpeed Range: 16-33 rpm
Unit Height: 1130mmUnit Diameter: 345mmUnit Weight: 268 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: Pressure Relief Valve2 Way Valve
Output Shaft: 75mm Square
EXCAVATORS 15 - 22 TS6 AUGERS 150mm-1.5M Dia
Torque Range: 16,503-24,755 NmOil Pressure Range: 160-240 Bar
Oil Flow Range: 80-170 lpmSpeed Range: 12-26 rpm
Unit Height: 1130mmUnit Diameter: 345mmUnit Weight: 269 kg
Hitch Options: Single Pin HitchDouble Pin HitchCradle Hitch
Optional Extras: Pressure Relief Valve2 Way Valve
Output Shaft: 75mm Square
www.augertorque.co.nz
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
Single Pin Hitch Single Pin Hitch
Bolt On Pressure Relief Valve
2 Way Valve2 Way ValveConverts single acting hammer
circuit into 2 Way auxiliary flow
Bolt On Pressure Relief Valve
2 Way Valve2 Way ValveConverts single acting hammer
circuit into 2 Way auxiliary flow
75mm Square
75mmSquare
Double Pin Cradle Hitch
Double Pin Cradle Hitch
Double Pin Hitch Double Pin Hitch
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 8.5M 7.7M 6.9M
200
225
250
300
350
375
400 8.5M 7.7M 6.9M
450 8M 7.2M 6.5M
500 8M 7.2M 6.5M
550 8M 7.2M 6.5M
600 8M 7.2M 6.5M
700 7.5M 6.8M 6.1M
750 7M 6.3M 5.7M
800 7M 6.3M 5.7M
900 6.5M 5.9M 5.3M
1000 6M 5.4M 4.9M
1200 5.5M 5M 4.5M
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
150 9M 8.1M 7.3M
200
225
250
300
350
375
400 9M 8.1M 7.3M
450 8.5M 7.7M 6.9M
500 8.5M 7.7M 6.9M
550 8.5M 7.7M 6.9M
600 8.5M 7.7M 6.9M
700 8M 7.2M 6.5M
750 7.5M 6.8M 6.1M
800 7.5M 6.8M 6.1M
900 7M 6.3M 5.7M
1000 6.5M 5.9M 5.3M
1200 6M 5.4M 4.9M
1500 5M 4.5M 4.1M
-
S6 AUGERSAuger Torque S6 Augers feature extra long flightedsections of shallow pitch flights. Earth, Tungsten and Rock variations are available.Available in the following diameters:
150mm200mm225mm250mm
300mm350mm375mm400mm
450mm500mm550mm600mm
700mm750mm800mm900mm
1M1.2M1.5M
S6 EXTENSIONSAvailable in thefollowing lengths:1.5M 2M 2.5M 3M
23
SHALLOW PITCH FLIGHTS
SHOWN:ionS6 1.5M Extensi
UNIQUE
DON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Augers shown feature Shock LockTM Toothholders. Rock Teeth Augers are also available.
EXCA
VATO
RS
12
- 22
TO
NN
ES
EXTRA-LONGFLIGHTLENGTHS
SHOWN:S6 150mm Dia, 1.888M LengthShoock LockTMkkRocck Augers are alsso available.
SHOWN:S6 1.5M Dia, 1.88M Length Shock LockTMkkRock Augers are also available.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
-
www.augertorque.co.nz
EXCAVATORS 21 - 45 TPA SERIES AUGERS 300mm-2.4M Dia
23,758-47,515 NmOil Pressure Range: 160-320 Bar
Oil Flow Range: 100-280 lpmSpeed Range: 11-30 rpm
Unit Height: 1411mmUnit Diameter: 406mmUnit Weight: 472 kg
Output Shaft Std: 110mm SquareOutput Shaft Opt: 100mm Square
130mm Square
EXCAVATORS 20 - 45 TPA SERIES AUGERS 300mm-1.8M Dia
Torque Range: 24,612-42,387 NmOil Pressure Range: 180-310 Bar
Oil Flow Range: 80-225 lpm Speed Range: 9-26 rpm
Unit Height: 1411mmUnit Diameter: 406mmUnit Weight: 442 kg
Output Shaft Std: 110mm SquareOutput Shaft Opt: 100mm Square
130mm Square
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
0mm 100uareSqu
m 100mmreSquar
110mm Square
110mm Square
130mm Square130mm
Square
2 Way ValveConverts single acting hammer
circuit into 2 Way auxiliary flow
Double Pin Cradle Hitch
Double Pin Cradle Hitch
Single Pin HitchSingle Pin Hitch
2 Way Valve2 Way ValveConverts single acting hammer
circuit into 2 Way auxiliary flow
Adaptor Platefor 42,000MAX
Adaptor Plate for 50,000MAX
AUGER DIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
300 11.5M 9.5M 9.6M
350
375 11.5M 10.5M 9.6M
400 11M 10M 9.1M
450 11M 10M 9.1M
500 10.5M 9.6M 8.7M
550 10.5M 9.6M 8.7M
600 10M 9.1M 8.3M
700 10M 9.6M 8.7M
750 9M 8.1M 7.3M
800 9M 8.1M 7.3M
900 8.5M 7.7M 6.9M
1000 8M 7.2M 6.5M
1200 7.5M 6.8M 6.1M
1500 7M 6.3M 5.7M
1800 6M 5.4M 4.9M
*These charts have been created as a guide only. Actual performance figures may differ.** The data shown has been obtained, by Auger Torque, in a controlled environment. Auger Torque cannot guarantee that this environment can be replicated and as such cannot accept liability if these figures cannot be achieved. ***Any data or specification contained within this documentation may be subject to change without prior notification.For further information please contact your authorised Auger Torque distributor.
EXCAVATORS 20 - 45 TPA SERIES AUGERS 300mm-1.5M Dia
Torque Range: 20,510-35,323 NmOil Pressure Range: 180-310 Bar
Oil Flow Range: 80-225 lpm Speed Range: 11-31 rpm
Unit Height: 1411mmUnit Diameter: 406mmUnit Weight: 442 kg
Output Shaft Std: 110mm SquareOutput Shaft Opt: 100mm Square
130mm Square
GU
IDE
TO D
RIL
LIN
G P
ERFO
RM
AN
CE*
100mm Square
110mm Square
130mmSquare
Double Pin Cradle Hitch
Single Pin Hitch
2 Way Valve2 Way ValveConverts single acting hammer
circuit into 2 Way auxiliary flow
Adaptor Plate for 35,000MAX
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
300 10.5M 9.5M 8.6M
350
375 10.5M 9.5M 8.6M
400 10M 9M 8.1M
450 10M 9M 8.1M
500 9.5M 8.6M 7.7M
550 9.5M 8.6M 7.7M
600 9M 8.1M 7.3M
700 9.5M 8.6M 7.7M
750 9M 8.1M 7.3M
800 9M 8.1M 7.3M
900 8.5M 7.7M 6.9M
1000 8M 7.2M 6.5M
1200 7.5M 6.8M 6.1M
1500 7M 6.3M 5.7M
24
AUGERDIA
(mm)
DRILLING DEPTH IN METRES**
SOFT MEDIUM HARD
300 12M 10.8M 9.7M
350
375
400 12M 10.8M 9.7M
450 11.5M 10.4M 9.4M
500 11.5M 10.4M 9.4M
550 11M 9.9M 8.9M
600 11M 9.9M 8.9M
700 10.5M 9.5M 8.6M
750 10M 9M 8.1M
800 10M 9M 8.1M
900 9.5M 8.6M 7.7M
1000 9M 8.1M 7.3M
1200 8.3M 7.5M 6.8M
1500 7.5M 6.8M 6.1M
1800 6.5M 5.9M 5.3M
2000 5.8M 5.2M 4.7M
2200 5.3M 4.8M 4.3M
2400 4.8M 4.3M 3.9M
-
EXCA
VATO
RS
17
- 45
TO
NN
ES
PA AUGERSAuger Torque PA Augers feature extra long flighted sections of shallow pitch flightsand are available in 2.3M and 3.3M lengths. Earth and Rock variations are available.Available in the following diameters:
300mm350mm400mm
450mm500mm550mm
600mm700mm750mm
800mm900mm1M
1.2M1.5M1.8M
2M2.2M2.4M
For Augers over 1.5 metres diameter please call our sales office for further information.
PA EXTENSIONSd and TelescopicBoth Fixeds are available in Extensioning lengths:the follow
2M 3M
SHOWN:Right: 2MExtensionFar Right: 2M TelescopicExtension
SSHOWN:PPA 300mm Dia22.3M LengthRRock Auger.
SHOWN:PA 1.5M Dia2.3M LengthRock Auger.
AUGER SUMMARY
Full technical details of Augers, Extensions and Wear Parts can be found in the Auger section of this brochure.
25
-
www.augertorque.co.nz
AUGERSFeatures of our Augers
HUB OPTIONS
Augers are available with all major standard hubs on the market, including:2”, 2.5”, 3”and 4” Hex50mm, 2” and 65mm Round57mm, 75mm, 100mm, 110mm and 130mm Square ...to name but a few.
HEAVY DUTY TUBE
We know that our Augers can expect a tough life so we only use the highest grade steel and vary our tube size according to machine size and application. Our Augers have areputation of being the toughest on the market.
SHALLOW PITCH FLIGHTS
By working with and, more importantly,listening to operators feedback we have developed the perfect pitch for our flights. It will cut at its maximum efficiency and, most importantly the spoil will stay on your Auger when you remove it from the hole.
Are you tired of losing your teeth downthe hole? With our patented Shock Lock™ Tooth Locking System loss isnow a thing of the past. The simple but effective locking pin holds teeth secure in both directions.
CONSTANT SPIRAL CUT
Our boring heads are designed with a Constant Spiral Cut. Teeth are located so that each makes its own fresh cut on every revolution and are angled to direct spoil towards the centre of theauger. The tooth cutting angle ensures spoil is broken up thoroughly to avoid any clogging.
PILOT AND TOOTH OPTIONS
Auger Torque Augers are offered withmany different tooth and pilot options to suit your specific need. For examplein the S4 range we offer up to eight different combinations and we have the know-how to help you select the optimal configuration.
Tooth Locking System
26
-
27
100mm 150mm 200mm 225mm 250mm 300mm
All F
ully
Fligh
ted
Over
all L
engt
h 0.
9m
WEAR PARTS FOR GROUND CONDITIONS
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.
HUB OPTIONS
S2 AUGERS
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected againstshock fractures.
Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease.Acclaimed as the best system on the market you will never need to worry about fitting spare teeth due to losing them again.
50mm Round
StihlAttchments
S2/4 Shock LockTM
Earth Tooth33-9121-KIT
S2/4 Earth Pilot33-9203-KIT
S1/2/4 Shock LockTM
Tooth Holder33-1010
Pin & Clip50 Round 42-1055-KIT
EARTH WEAR PARTS EXTRAS
MICRO EXCAVATORS 0.75 - 1 T
-
28 www.augertorque.co.nz
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensuresyour Auger teeth are safely locked in place and protectedagainst shock fractures.
Replacing worn teeth is a breeze with this system, simply knockout the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fitting spareteeth due to loss again.
S4 AUGERS
Earth Drill X2000Earth Drill ML2000
Earth Drill X1500 Earth Drill ML1500
Earth Drill X2500Earth Drill ML2500
Earth Drill 4500MAX
Earth Drill 3000MAXEarth Drill 3000TC
100mm
Fully
Flig
hted
950
mm
780m
m
750m
m
750m
m
700m
m
700m
m
675m
m
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm 600mm
675m
m
625m
m
625m
m
625m
m
600m
m
600m
m
Over
all L
engt
h 1.2
M
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
HUB OPTIONS
2” / 50mm Hex65mm Round
57mm Square
MINI EXCAVATORS 1 - 5 T, MINI LOADERS,SKIDSTEER LOADERS UP TO 80HP ANDTRUCK CRANES UP TO 9 T / METRE
Earth Drill 3500MAX
Full technical details of the Earth Drills can be found in the Earth Drill section.
-
29
WEAR PARTS REQUIRED FOR GROUND CONDITIONS
EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.
FLAT TUNGSTEN (Shock LockTM)Best suited to soft abrasive grounds like sand, to helpreduce wear.
FLAT TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Flat Tungsten Teeth. Improves cutting where low downpressure machines are being used, i.e. Mini Loaders,small Skid Steer Loaders & small Excavators. Must onlybe fitted to the inside tooth holders with standard full width Flat Tungsten Teeth being fitted on the outer most holders.
TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditionswhere floating rocks may be encountered. The perfectall-rounder if you are not sure about what you might encounter.
TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Tungsten Teeth. Improves cutting where low down pressuremachines are being used, i.e. Mini Loaders, small Skid Steer Loaders & small Excavators. Must only be fittedto the inside tooth holders with standard full width Tungsten Teeth being fitted on the outer most holders.
EXTRA DIG PILOTA stronger Pilot for more demanding ground conditions.
800mm750mm700mm 900mm
525m
m
525m
m
525m
m
525m
m
500m
m
800m
m
1M
1.2M
S4 EXTENSIONS
All the Augers above are shown withShock LockTM Tooth Holders.
* Overall Length given includes theauger fitted with wear parts.
S2/4 Shock LockTM
Earth Tooth33-9121-KIT
S2/4Earth Pilot33-9203-KIT
S4 Shock LockTM
Flat Tungsten Tooth33-9124-KIT
S4 Shock LockTM
Flat Tungsten Chisel33-9123-KIT
S4 Shock LockTM
Tungsten Tooth33-9122-KIT
S4 Shock LockTM
Tungsten Chisel33-9125-KIT
S4 Tungsten Pilot33-9204-KIT
S4Flat Tungsten Pilot33-9222-KIT
S1/2/4 Shock LockTM
Tooth Holder33-1010
Pin & Clip65 Round 30-0004-KIT
S4 Extra Dig Pilot33-9212-KIT
S4 Pilot Extension33-4106-KIT
S4 Drive Lugs33-4102 33-410533-4110
EARTH WEAR PARTS TUNGSTEN WEAR PARTS EXTRAS
Pin & Clip2” Hex30-0003-KIT
-
30
1080
mm
977m
m
975m
m
965m
m
900m
m
900m
m
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm
900m
m
875m
m
750m
m
750m
m
750m
m
Over
all L
engt
h 1.5
M*
600mm
750m
m
75mm Square
2.5” / 63.5mm Hex
HUB OPTIONS
S5 AUGERS
Earth Drill 5500MAX
Earth Drill 8000MAX
Earth Drill 7000MAX
Earth Drill 7000TC
Earth Drill 5000TC
www.augertorque.co.nz
EXCAVATORS FROM 4.5 - 8 T, TELEHANDLERS, HIGH FLOW SKIDSTEER LOADERS, BACKHOES AND TRUCK CRANES FROM 9 - 18 T / METRE
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensuresyour Auger teeth are safely locked in place and protectedagainst shock fractures.
Replacing worn teeth is a breeze with this system, simply knockout the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fitting spareteeth due to loss again.
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking System
Full technical details of the Earth Drills can be found in the Earth Drill section.
-
800mm750mm700mm 900mm 1M 1.2M
700m
m
700m
m
700m
m
700m
m
525m
m
525m
m
S5 EXTENSIONS
S5 TELESCOPIC
WEAR PARTS REQUIREDFOR GROUND CONDITIONSEARTH (Shock LockTM)Best suited to soft grounds like earthand clay.TUNGSTEN (Shock LockTM)Best used in dry, hard or mediumground conditions where floatingrocks may be encountered. Theperfect all-rounder if you are not sure about what you might encounter.ROCK (Taper Lock)For very hard ground and tarmacwhere extra cutting is needed andhigh wear is expected. Most effective on machines with high down pressure.
S5/6 Shock LockTM
Earth Tooth33-9126-KIT
S5/6Earth Pilot33-9205-KIT
S5/6 Shock LockTM
Tungsten Tooth33-9127-KIT
S5/6 Rock Tooth33-9107
S5/6 Tungsten Pilot33-9206-KIT
S5/6 Shock LockTM
Tooth Holder33-1011
Pin & Clip57/75 Square30-0002-KIT
S5/6 Rock Pilot33-9207-KIT
S5/6 RockTooth Holder33-1013
S5/6 Drive Socket1 3/4” Hex33-4103
EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS
1M
1.5M
2M
1.5M
2M
31
All the Augers above areshown with Shock LockTM Tooth Holders. Rock Teeth require a Rock Tooth version of the Auger.
* Overall Length given includes the auger fitted with wear parts.
For Augers over 1 metre diameter please call our sales office for further information.
Augers over 1m - special order up to 1.2m
-
32
875m
m
900m
m
1000
mm
700mm
1320
mm
1200
mm
1203
mm
1225
mm
1200
mm
1125m
m
150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 600mm
1125m
m
1000
mm
1000
mm
Over
all L
engt
h 1.8
8M*
S6 AUGERS
Earth Drill 10 000
Earth Drill 25 000MAX
HUB OPTIONS
75mm Square
Earth Drill 15 000 Earth Drill 15 000MAX Earth Drill 20 000MAX
www.augertorque.co.nz
With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensuresyour Auger teeth are safely locked in place and protectedagainst shock fractures.
Replacing worn teeth is a breeze with this system, simply knockout the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fitting spareteeth due to loss again.
UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!
Tooth Locking SystemEXCAVATORS & BACKHOES FROM 8 - 22 T
Full technical details of the Earth Drills can be found in the Earth Drill section.
-
875m
m
800mm750mm 900mm 1M 1.2M 1.5M
700m
m
600m
mAugers of a larger diameter andlength can be manufactured foruse with these Earth Drills, but technical advice is required. Call one of our main offices for more details.
S5/6 Shock LockTM
Earth Tooth33-9126-KIT
S5/6Earth Pilot33-9205-KIT
S5/6 Shock LockTM
Tungsten Tooth33-9127-KIT
S5/6 Rock Tooth33-9107
S5/6 Tungsten Pilot33-9206-KIT
S5/6 Shock LockTM
Tooth Holder33-1011
Pin & Clip57/75 Square30-0002-KIT
S5/6 Rock Pilot33-9207-KIT
S5/6 RockTooth Holder33-1013
S5/6 Drive Socket1 3/4” Hex33-4103
EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS
All the Augers above are shownwith Shock LockTM Tooth Holders. Rock Teeth require a Rock Toothversion of the Auger.
* Overall Length given includes the auger fitted with wear parts.
33
EARTH (Shock LockTM)Best suited to soft groundslike earth and clay.
WEAR PARTS FORGROUND CONDITIONS
TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where floating rocks may beencountered. The perfect all-rounder if you are not sure about what you might encounter.
S6 EXTENSIONS
1.5M
2M
2.5M
3M
ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.
-
34
PA Augers are available in 2.3 metre or 3.3 metre lengths as standard - Please specify when ordering
800mm750mm700mm 900mm
Fully
Flig
hted
1558
mm
1527
mm
300mm 350mm 400mm 450mm 500mm 600mm
1446
mm
1446
mm
1446
mm
1433
mm
1321
mm
1321
mm
1321
mm
1321
mm
Over
all L
engt
h 2.
3M /
3.3M
*
Earth Drill 35 000MAX
Earth Drill 42 000MAX
www.augertorque.co.nz
PA AUGERS The PA Range of Augers are the most heavy-duty units available and are available in 2.3 metre and 3.3 metre lengths as standard. Fully flightedversions are available also.
Our standard PA Auger range has a maximum diameter of 1.5m however Augers with a diameterof up to 2.4m can be manufactured on request. Contact our sales office for further information.
HUB OPTIONS
100mm Square and 130mm Square options are also available.
110mm Square
EXCAVATORS 17 - 45 T
Full technical details of the Earth Drills can be found in the Earth Drill section.
Earth Drill 50 000MAX
-
1M 1.2M 1.5M
971m
m
908m
m
750m
m
PA EXTENSIONS PA TELESCOPIC
2M2M
3M3M
2M
3M3M
WEAR PARTS FOR GROUND CONDITIONS
EARTH (Taper Lock)Best suited to soft grounds like earth and clay.ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective onmachines with high down pressure.
35
PAEarth Tooth33-9108
PA RockTooth Holder33-1012
PARock Tooth33-9109
EARTH WEAR PARTS EXTRASROCK WEAR PARTS
PAEarth Pilot33-9208-KIT
PADrive Socket33-4104
33-9209-1
33-9209-3
33-9209-2PA Rock Pilot33-9209-KIT
Pin & Clip110 Square 23-3900-KIT
ER AUGERLARGE RSs of a largAugers erter and lendiamet ngth cannufacturedbe ma d for use
hese Earthwith th h Drills, but cal advice technic is required. ne of our mCall on main offices ore detailsfor mo .
* Overall Length given includes the auger fitted with wear parts.For Augers over 1.5 metres diameter please call one of our main offices for further information.
The PA Rock Pilot can be purchased in separate sections or as a whole assembly when buying replacement parts.
Augers over 1.5m - special order up to 1.8m
-
TCH Auger RangeFor the most demanding drilling situations
HUB OPTIONS
Tapered Cutting Heads are available in 2 popular sizes; 75mm and 110mm Square.
HEAVY DUTY TUBE
We know that the TCH Auger range will be be used for the toughestapplications so we only use the highest grade steel and vary our tubesize according to machine size and application.
SHALLOW PITCH FLIGHTS
By working with and, more importantly,listening to operators feedback we have developed the perfect pitch for our flights. It will cut at its maximum efficiency and, most importantly the spoil will stay on your cutting head when you remove it from the hole.
TAPERED CUTTING PATH
Our cutting heads are designed with a Constant Spiral Cut. Teeth are located so that each makes its own fresh cut on every revolution and are angled to direct spoil towards the centre of theCutting Head. The tooth cutting angle ensures spoil is broken up thoroughly to avoid any clogging.
ROCK PILOT AND TOOTH
Auger Torque Tapered Cutting Heads are offered with our rugged Rock tooth and pilot options to suit your specific need.
www.augertorque.co.nz36
-
37
FEATURES
Drilling performance is increased due to precisely calculatedtooth positions along the edges of the cutting head
Improved productivity when cutting through hard ground and fractured rock
The positioning of the teeth increases the penetrative forceswhich can be found on the tooth cutting edge
This increase in force fractures the substrate into large piecesbringing them to the surface at an increased rate compared totraditional cutting heads
Patents Pending:British Patent Pending: 1505626
Australia Patent Pending: 2015201716
600MM DIAMETER HOLE INTO SOLID CONCRETE
-
Truck Cranes & The Rope Wind Hitch
BOOM CLAMP
Auger Torque manufactures all hitches in-house, ensuring custom precision fit to any crane*.
Advise our sales team of the make and model of your crane as lots of variations are available prefabricated off the shelf ready for immediate delivery.
ROPE WIND HITCH
A simple but effective solution for transporting an Earth Drill on a Truck Crane. Utilising the rotation of the Earth Drill the unit can be lifted up under the boom of the crane after use and locked into position, making the whole unit secure during travel.
g q*Contact Auger Torque for further details.
Growing in popularity, truck cranes allow a great deal of flexibility when working off site. On-board hydraulics allow trucks to deliver materialswhere no loading facilities are available.
Equally, remote working can be made easy by using the truck craneboom for earth drilling operations. Flat bed trucks equipped with Truck Crane Earth Drills turn telegraph and power pole as well as street light installations into a single man operation and foundation piling can all be
facilitated with the use of one vehicle.
The ingenious Auger Torque Rope Wind Hitch allows for safe and secure storage during transit without the need to
disassemble the unit from the boom.
www.augertorque.co.nz38
-
Our world beating products are now in use on ALL of the world’s continents after one of Auger Torque’s Earth Drills was used to bore through the ice as part of the Lake Ellsworth exploration project in Antarctica.
BBC News showed an Auger Torque 3000TC taking a lead role in what is considered to be the most important geological survey of the sub-continent in decades; unlocking the secrets of the hidden Lake Ellsworth from beneath the polar ice cap.
The 3000TC was chosen by the British Antarctic Survey for its reliability in extremely demanding conditions.
The Earth Drill was used to bore holes in the pack ice for pilot holes. Steve White, the Head of Vehicles Engineering said “Being so remote and having only a narrow window of opportunity to sample the lake means we need to know that the equipmentwill be 100% reliable. Only the best was going to be good enough for hassle free drilling”.
Today, we have equipment working in the full spectrum of temperatures experienced on all seven continents.
The British AntarcticSurvey’s choice confirmsthe confidence we place in our products.
39
-
www.augertorque.co.nz40
XHT Torque HeadsFeatures of our Screw Pile Torque Heads
INTEGRAL GEAR OIL COOLING
Our unique design allows for efficient oil cooling via auto circulation of the fluid without the need for an external mechanicalpump. This system effectively protects yourinvestment during extreme high torquescrew pile applications.
EPICYCLIC GEARBOX
Torque is amplified by using the uniqueAuger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
HIGH QUALITY HYDRAULIC MOTORS
As with our Earth Drill range, we use the highest quality suppliers to develop the most reliable attachments available on the market today.
NON-DISLODGEMENT SHAFT
Unique to Auger Torque, the Non-Dislodgement Shaft is a single piece drive shaft assembled top down and locked into the XHT Torque Head housing. This design guarantees that the shaft will never fallout, making for a safer work environment, not only for the operator but also any surrounding workers, a MUST-HAVE
FEATURE for any safety conscious company.
Auger Torque is proud to announce the release of our brand new XHT Series TorqueHeads. Specifically designed and ideally suited to foundation screw pile applications this series heralds a new era in the world of screw pile torque heads.
The new torque heads are available to suit machines from as little as 24T all the way to 50T and are designed and manufactured in-house at Auger Torque’s UK facility,guaranteeing class leading workmanship and the reliability Auger Torque is famous for.
BENT AXIS PISTON MOTOR
INTEGRAL GEAR OIL COOLING SYSTEM(DESIGNED FOR LONG DUTY CYCLES)
CARRIER RISE SUPPRESSION SYSTEM(CRSS)
MODULAR GEAR CARRIERS
HYBRID OIL CIRCULATION SYSTEM(HOCS)
OVER ENGINEERED BEARINGS
-
41
A new era in the world ofSCREW PILE TORQUE HEADS
-
www.augertorque.co.nz42
EXCAVATORS 24 - 50 T
Torque Range: 64,830-145,868 NmOil Pressure Range: 160-360 Bar
Oil Flow Range: 100-320 lpmSpeed Range: 4-13 rpm
Unit Height: 2166mmUnit Diameter: 825mmUnit Weight: 2400 kg
Hitch Options: Single Pin Hitch
Double Pin Hitch
Double Pin Cradle Hitch
Output Shaft: 180mm Hex
EXCAVATORS 24 - 50 T
Torque Range: 130,798-225,030 NmOil Pressure Range: 180-280 Bar
Oil Flow Range: 80-225 lpmSpeed Range: 1.8-4.9 rpm
Unit Height: 2166mmUnit Diameter: 825mmUnit Weight: 2400 kg
Hitch Options: Single Pin Hitch
Double Pin Hitch
Double Pin Cradle Hitch
Output Shaft: 180mm Hex
180mm Hex 180mm Hex
E
TO
OS
UUU
H
O
E
TO
OS
UUU
H
O
XHT Torque Heads
Double Pin Cradle Hitch
Double PinCradle Hitch
-
43
Many of Auger Torque’s Earth Drills, from therobust Earth Drill 10,000 upwards, are excellenttools for screw pile installation due to their high levels of torque and range of rotational speed.
Couple this with the all new electronic torquemetering linkage block which has an accuracy rating of over 99% and you have all you need forfast and precise Screw Pile installation.
Screw piles can be used as a steel foundation solution for railway and highway installations,masts, towers, cantilever gantries, platforms,lighting columns and sign posts. They support structures in both tension and compression,providing an ideal solution where overturningforces are significant or when ground conditions aren’t suitable for other methods of foundation.
Quick and easy to install, in many cases the piles and associated structures can be installed in a day. Using the torque metering linkage block, applied torques can be displayed and logged for data analysis.
Made from galvanised steel, Screw Piles are alsomaintenance free and reusable after removal from temporary installations.
BENEFITS OF SCREW PILES INCLUDE:
Quick and easy to installNo concrete mixing or curing timeNo excavations needed or spoil to removeSuitable for soft or mixed composite groundInstallations possible in low temperatures and wet conditionsCan be installed around existing underground servicesRemovable and re-useable
Screw Piles can be made to customers ownspecifications - talk to your closest Auger Torque main office for more information.
Screw Pile Installations
-
www.augertorque.co.nz44
Alignment MonitorPerfect for Auger and Screw Pile applications, the Auger Torque Alignment Monitor is the essential tool for ensuring your application is precise and quick.
Not restricted to parent machine size, the Alignment Monitor is easy to install. With universal mounting of both the alignment sensor and LED user display, the sensor is fixed to the top of your existing earth drill. The bright LED display is mounted inside the operators cab in a convenient location. Plug the power lead into the 12/24V power socket, and you’re good to go.
The Alignment Monitor has 4 sensitivity settings from 1 to 5° increments, allowing you to adjust to suit the application.
Now that the operator can see the alignment in all directions, there is no need foradditional operatives. Perfectly aligned installations are now a one man operation.
FEATURES
Plug and play capability
Alignment display easily installed in operator cab
A compact, bright LED interface
Alignment sensor fits to your existing earth drill
Sensitivity adjustment to suit the application
IP54 rated - suitable for use in all weathers
12-24V operating range
One man operation
-
Applying the correct torque during the installation of Screw Piles isparamount to ensure the structure is safely secured.
Receiving data of real-time applied torque which is accurate to 99.7% forthis critical procedure is made easy with this new Auger Torque device.
The Torque Monitor is simply attached between the mounting bracketand the Earth Drill hood pin.* The sophisticated sensors inside sendinstant data to a hand-held PDA, allowing operators to work with ultimate efficiency.
Our Torque Monitor’s are able to measure torque values up to 65,000Nm.The Monitor’s are ideally suited to the Earth Drill range 10,000MAX - 50,000MAX range and our XHT Torque Head range, but will work inconjunction with the majority of our other Earth Drills.
Torque Monitor TM25
TM65
FEATURES
Measure up to 65,000Nm
Quick and easy to install
Correct torque measurement when installing screw anchors to an accuracy of 99.7%
Allows operators to work with ultimate efficiency
Wireless transmission
Real time data transfer
Compatible with Auger Torque and OEM earth drills
*XHT225: mount onto output shaft
45
e:Torque Range 5,000-25,000 Nmnge: Earth Drill Ran 10,000-25,000MAX
Unit Height: 430mmr: Unit Diameter 270mm
Unit Weight: 59kgtion:Hitch Connect Single Pin:Pin Diameter: 45mmas:Optional Extra Handheld PDA
e:Torque Range up to 65,000 Nmnge: Earth Drill Ran 30,000MAX-50,000MAX
Unit Height: 510mmr: Unit Diameter 290mm
Unit Weight: 80kgtion:Hitch Connect Single Pin:Pin Diameter: 60mmas:Optional Extra Handheld PDA
-
g a trench has The laborious task of diggingdvent of thebeen transformed since the a
orque’s range of Trencher Attachment. Auger Toto 1.5 meters andTrenchers cover depths from 0.6
s piled neatly to widths up to 350mm, whilst spoil isl auger.the side of the trench by the integral
how Trencher Experience hcan make lightAttachments construction projectwork of your cour trenching bucket- the days of you
may well be over.
Trencher Attachments
www.augertorque.co.nz46
-
Hydraulic Chain Tensioner
47
A new feature of the Auger Torque Trencher rangeis the Hydraulic Chain Tensioner. When extra chain tension is required, this innovative design feature allows for rapid adjustment of the chainwith minimal tools, and minimal disruption.
3 simple steps to a tensioned Trencher chain:- Remove protective cover- Add grease to hydraulic tensioner- Refit protective cover
CHAINTENSIONEDIN UNDER1 MINUTE!
-
Oil Pressure Range: 160-240 BarOil Flow Range: 35-65 lpmUnit Width: 850mmUnit Height: 736mmUnit Length: 1465mmCutting Width Range: 100-300mm
Technical data may be subjectto change without notice.
EXCAVATORS 2.5 - 4.5 T & SKIDSTEER LOADERSFor Trenches 300-600mm Depth
Tungsten ToothRight Hand44-2001
Tungsten ToothCentre44-2002
Tungsten ToothLeft Hand44-2003
Earth ToothRight Hand44-2010
Earth ToothLeft Hand44-2011
EARTH WEAR PARTS TUNGSTEN WEAR PARTS
48
Nose Roller, Bearing & Circlip Kit42-1900-KIT
MT Sprocket42-1033
BOOM SPARE PARTS
www.augertorque.co.nz
MT Trencher Range
Ground Heat Pump Systems
Drainage & Irrigation
Gas / Water Piping
Electric Cable
Fibre Optic Cable
Hedge & Small Tree Planting
Oil Pressure Range: 180-240 BarOil Flow Range: 45-80 lpmUnit Width: 850mmUnit Height: 736mmUnit Length: 1800mmCutting Width Range: 100-300mm
Technical data may be subjectto change without notice.
EXCAVATORS 3 - 5 T & SKIDSTEER LOADERSFor Trenches 600-900mm Depth
G WIDTH (mm)CUTTING100
2.535
4.5
3.5
75
EXCA
VATO
R (T
ON
NE)
SKID
STE
ER L
OAD
ER (L
PM)
200150
3.0
4.0
3.045
5.0
4.0
75
EXCA
VATO
R (T
ON
NE)
SKID
STE
ER L
OAD
ER (L
PM)
3.5
4.5
G WIDTH (mm)CUTTING100 200 300150 250
IDEALLY SUITED SUITABLE NOT SUITED
-
CHAIN OPTIONS
There are a choice of 3 chain options for each machine to allow for differing ground conditions. Check the chain widths available against Auger Torque charts, price lists and specifications.
TREN
CH
ERS
FOR
LOA
DER
S &
EXC
AVAT
OR
S 2.
5 -
5 TO
NN
ES
100mm 150mm 200mm 250mm 300mm
MT 600 Earth 44-2901 44-2903 44-2905 44-2940 44-2936
MT 600 Combination 44-2902 44-2904 44-2906 44-2919 44-2937
MT 600 Tungsten 44-2918 44-2913 44-2914 44-2945 44-2938
MT 900 Earth 44-2907 44-2909 44-2911 44-2939 44-2933
MT 900 Combination 44-2908 44-2910 44-2912 44-2915 44-2934
MT 900 Tungsten 44-2916 44-2920 44-2921 44-2941 44-2935
TRENCH DEPTH CAPABILITY
Two versions of mounting hitches are available;
SIDE SHIFT FRAME For Skidsteer Loaders
MINI LOADER FRAMEfor Mini Loaders
EXCAVATOR HITCHAvailable in several pin sizes to fit most machines.
Pin diameter options30mm: 15-5300035mm 15-5350040mm 15-5400045mm 15-54500
DEPTH A DEPTH B DEPTH C
MT 600 300mm 450mm 600mmMT 900 600mm 750mm 900mm
49
GROUND CONDITIONSEARTHBest suited to soft grounds like earth and clay.COMBINATIONBest used in dry, hard or mediumground conditions.TUNGSTENBest used in dry, hard groundconditions.
CHAIN WIDTH OPTIONS
EARTHSoft Ground
TTUNGSTENHard Ground / Frozen
COMBINATIONMixed Terrain
Adjustable Depth-control Skid allows for 3 different depth settings
AB
C
FEATURETENSIONCHAIN IN UNDER 1 MINUTE
-
EXCAVATORS 5 - 7.5 T & SKIDSTEER LOADERSFor Trenches 600-900mm Depth
EXCAVATORS 5 - 7.5 T & SKIDSTEER LOADERSFor Trenches 800-1200mm Depth
EXCAVATORS 5 - 10 T & SKIDSTEER LOADERSFor Trenches 1000-1500mm Depth
Tungsten ToothRight Hand44-3005
Tungsten ToothCentre44-3004
Tungsten ToothLeft Hand44-3003
Nose Roller, Bearing & Circlip Kit43-1900-KIT
XHD Sprock43-1019
Earth Tooth Right Hand44-3001
Earth ToothLeft Hand44-3001
EARTH WEAR PARTS TUNGSTEN WEAR PARTS BOOM SPARE PARTS
50
et
www.augertorque.co.nz
XHD TrencherRange
Ground Heat Pump Systems
Drainage & Irrigation
Larger BoreGas / Water Piping
Deep Electric Cable
Fibre Optic Cable
Hedge & Tree Planting
Oil Pressure Range: 180-240 BarOil Flow Range: 60-95 lpmUnit Width: 1018mmUnit Height: 808mmUnit Length 1962mm
150-350mm
be subjectotice.
Oil Pressure Range: 180-240 BarOil Flow Range: 70-115 lpmUnit Width: 1018mmUnit Height: 808mmUnit Length 2262mm
m
t
Pressure: 180-240 BarOil Flow Range: 80-135 lpmUnit Width: 1018mmUnit Height: 808mmUnit Length 2562mm
G WIDTH (mm)CUTTINGG WIDTH (mm)CUTTING150
560SK
I300250200
G WIDTH (mm)CUTTING150
560
9
EXCA
VATO
R (
SKID
STE
ER L
OA
350300250200
mmUnit Length: 2562mmCutting Width Range: 150-200mm
Technical data may be subjectto change without notice.
G WIDTH ( )CUTTING150
775
13115
EXCA
VATO
R (T
ON
NE)
SKID
STE
ER L
OAD
ER (L
PM)
200
mUnit Length: 2262mmCutting Width Range: 150-300
Technical data may be subjecto change without notice.
13
9
115
EXCA
VATO
R (T
ON
NE)
ID S
TEER
LOA
DER
(LPM
)
p
g
le
Unit Length:Cutting Width Range:
Technical data may bto change without no
13115
(TO
NN
E)
ADER
(LPM
)
IDEALLY SUITED SUITABLE NOT SUITED
-
TREN
CH
ERS
FOR
LOA
DER
S &
EXC
AVAT
OR
S 5
- 10
TO
NN
ES
51
CHAIN OPTIONS
There are a choice of 3 chain options for each machine to allow for differing ground conditions. Check the chain widths available against Auger Torque charts, price lists and specifications.
TRENCH DEPTH CAPABILITY
Adjustable Depth-control Skid allows for 3 different depth settings
AB
C
MOUNTING HITCH OPTIONS
Two versions of mounting hitches are available;
SIDE SHIFT FRAME For Skidsteer Loaders
MINI LOADER FRAMEfor Mini Loaders
EXCAVATOR HITCHAvailable in several pin sizes to fit most machines.
Pin diameter options40mm 15-6400045mm 15-6450050mm 15-6500055mm 15-6550060mm 15-6600065mm 15-66500
DEPTH A DEPTH B DEPTH C
XHD 900 600mm 750mm 900mmXHD 1200 800mm 1000mm 1200mmXHD 1500 1000mm 1250mm 1500mm
EARTHSoft Ground
TTUNGSTENHard Ground / Frozen
COMBINATIONMixed Terrain
GROUND CONDITIONSEARTHBest suited to soft grounds like earth and clay.COMBINATIONBest used in dry, hard or mediumground conditions.TUNGSTENBest used in dry, hard ground conditions.
CHAIN WIDTH OPTIONS
150mm 200mm 250mm 300mm 350mm
XHD 900 Earth 44-3904 44-3907 44-3910 44-3913 44-3916
XHD 900 Combination 44-3905 44-3908 44-3911 44-3914 44-3917
XHD 900 Tungsten 44-3906 44-3909 44-3912 44-3915 44-3918
XHD 1200 Earth 44-3922 44-3925 44-3928 44-3931 -
XHD 1200 Combination 44-3923 44-3926 44-3929 44-3932 -
XHD 1200 Tungsten 44-3924 44-3927 44-3930 44-3933 -
XHD 1500 Earth 44-3937 44-3940 - - -
XHD 1500 Combination 44-3938 44-3941 - - -
XHD 1500 Tungsten 44-3939 44-3942 - - -
FEATURETENSIONCHAIN IN UNDER 1 MINUTE
-
Sweeper Broomooms are precision engineered from high grade steel. EasyAuger Torque brople brush replacement, high quality hydraulic motors andadjustment, simpe design are just a few of the features. With the optionallow maintenancew profile water spray system for keeping airborn dust to ahigh capacity, lowrooms really do stand out from the rest.minimum, our br
mber of variations and sizes for Skid Steer Loaders, FrontAvailable in a numd Telehandlers means that we will be able to help you outEnd Loaders, andom for most applications. Call your nearest Auger Torque with the right broformation.office for more inf
FEATURES
ep width1800mm swee
reverse motionForward and r
or fits to left or right side to match hydraulic connectionsModular moto
ket cover for convenient brush accessLockable buck
luminium brush assembly - Easy brush replacementLightweight a
depth adjustmentSimple brush
lt on cutting edgeReversible bo
rubber dust suppression skirtsEasy-change
ystem (optional)Water spray s
heelsSteel guide wh
esign for enhanced operator visibilityLow profile de
ance designLow maintena
SWEEPER 1800Oil Pressure Range: 240 Bar maxOil Flow Range: 65-115 lpmHose Ports: 1/2” BSPSweep Width: 1800mmBrush Diameter: 600mmUnit Width: 2183mmUnit Height: 627mmUnit Depth: 1339mmUnit Weight: 470 kg
Optional Extras: Water Spray System
LOCKABLE BUCKET COVER
USE AS A STANDARD BUCKET
OPTIONAL WATER SPRAY SYSTEM
www.augertorque.co.nz52
-
Hedge TrimmerWe are pleased to announce a new addition to our ever increasing lineof high quality attachments. The Augger Torque T150 Hedge Trimmer isnow available to order.
The Auger Torque Hedge Trimmers are the perfect addition for excavatorsfrom 1.5T - 8T and Skidsteer loaders.. The newly designed mounting frame allows you to quickly switch thee Hedge Trimmer between the left and right hand side of the parent machine. When fitted to a Skid Steer, it can also be used to cut grasss and brush. Attaching the optional tooth extension provides a full 2.5m ccutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.
FEATURES
Suits 1.5 to 8T excavators and Skid Steer Loaders
1.5m cutting length
1m cutting extension (optional)
Quickly switch between left and right side cutting
Cut branches up to 40mm diameter
Replaceable cutting teeth
Neat and accurate cut
High performance
Extreme durability
Low maintenance
Hoses included
Delivered ready to use
1m ExtensionExtends cutting length to 2.5m
T150 EXTENSIONSuitable For: 1.5T - 8T Excavators
Skid Steer LoadersCutting Length: 1500mmMax. Cutting Dia: 40mmUnit Width: 1537mmUnit Height: 292mmUnit Depth: 357mmUnit Weight: 69 kgHitch Options: Double Pin Hitch
Skid Steer FrameHoses Included:Hoses Included: YesYes
Cutting Length: 1000mmUnit Width: 1058mmUnit Height: 120mmUnit Depth: 217mmUnit Weight: 26 kg
53
-
COMPACT AND EASY TO FREO FREIGHT
Ideal for site locations where pallet handling is neededbut the site is unmade or too rough for a fork lift truck.
Skid Steer Loader Pallet Forks
www.augertorque.co.nz54
Assembled Height: 930mmAssembled Width: 1185mmAssembled Length: 1340mmKit Weight: 176kg
Technical data may be subject to change without notice.
Assembled Height: 930mmAssembled Width: 1185mmAssembled Length: 1490mmKit Weight: 196kg
Technical data may be subject to change without notice.
Weight Capacity: 1500kgTine Height: 550mmTine Width: 80mmTine Length: 1070mmTine Thickness: 40mm
Weight Capacity: 1800kgTine Height: 550mmTine W