product guide - idatalink

Revision Date20151001

Document numbeR

notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

PRoDuct guiDeiDatastart HC

www.idatalink.comAutomotive Data Solutions Inc. © 2015


BOX CONTENTS - 1 OF 1

M3 : 10 PIN WHITE

M2 : 12 PIN BLACK M5 : 6 PIN BLUE

M4 : 20 PIN BLACK

M18 PIN BLACK

HC MODULE

BOX CONTENTS

AFTERMARKET HOOD SWITCH AND CABLE

ANTENNADECODER

[1x] 1-WAY REMOTE [1x] 2-WAY REMOTE

[2x] STICKERS

10 PIN WHITE CONNECTOR

12 PIN BLACK CONNECTOR


BLUE CABLE WITH 4 PIN BLACK CONNECTORS BLACK CABLE WITH 4 PIN BLUE CONNECTORS


4 PIN RED

4 PIN RED

TELEMATIC : 4 PIN BLUE

Included with the HC1, HC2Part Numbers: HC1151AC, HC2351AC, HC2352AC

Included with the HC2Part Number: HC2352AC



Included with the HCFPart Number: HCF900A

Included with the HCF, HCX, HC1, HC2Part Numbers: HCF900A, HC1151AC, HC2351AC, HC2352AC, HCX000A

3 PIN BLACK

PROGRAMMINGBUTTON

ANTENNA BUTTON

USB

LED 2

ANTENNA LED

ANTENNA LED

LED 1

RF/WEBLINK : 4 PIN BLACK

2 PIN BLACK

RF PORT : 4 PIN BLACKRF PORT : 4 PIN BLACK

DECODERRF PORT

ANTENNARF PORT

ANTENNA PORT : 4 PIN WHITE

6 PIN WHITE

MODULERF PORT

MODULERF PORT

[2x] 2-WAY REMOTES

[2x] 1-WAY REMOTES

6 PIN BLUE CONNECTOR

www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

of 17• 20151001


MODULE PINOUT - 1 OF 1

79

3

10864

12

5

79

3

108

1112

64

12

5

79

3

108

111314

12

1517181920

16

64

12

5

453

21

6

M3

M2 M5

M1

M4

4

2

8

1

3

5

7

6

M5

M4

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

- PROG. 1 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. 1 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 EMPTY07 EMPTY

POC 1 - UNLOCK DRIVER (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - UNLOCK DRIVER (-) OUTPUTPOC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT

POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUTPOC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT

12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 NEGATIVE (-) INPUT

01 EMPTY02 EMPTY03 BROWN/RED04 BROWN/YELLOW05 BLUE/RED06 BLUE/YELLOW07 EMPTY08 ORANGE09 YELLOW10 EMPTY11 GRAY/RED12 GRAY/YELLOW13 GREEN/RED14 ORANGE/WHITE15 BROWN16 ORANGE/BLACK17 PINK18 PURPLE19 RED20 BLACK

M3

M2

M1

06 WHITE - PROG. 2 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. 2 (10A) - PARKING LIGHTS (+) (DEFAULT)

02 WHITE/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT

04 WHITE/RED•BLUE DOT03 GRAY/RED•BLUE DOT

06 WHITE•BLUE DOT05 GRAY•BLUE DOT

HC MODULE


of 17• 20151001

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

of 17• 20151001

COMPATIBLE ACCESSORIES - 1 OF 2

MODULETELEMATIC PORT

DRONE

(NC)

TELEMATIC KIT (accessory sold separately)

10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9

WEBLINK MOBILE (required accessory sold separately)

MOBILE DEVICE PORT

OBDII CONNECTOR

4 PIN BLACK CABLEMODULE WEBLINK PORT

OBDII CONNECTOR

WEBLINK CABLE (required accessory sold separately)

WEBLINK CABLE

COMPUTERUSB PORT

4 PIN BLACK CABLE

MODULE WEBLINK PORT

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC

of 17• 20151001

COMPATIBLE ACCESSORIES - 2 OF 2

RF KITDECODER

DECODER (included with the HCF)

ANTENNA

FLASH THE DECODERBEFORE THE INSTALLATION

DECODERBLUE CABLE BLACK CABLE

(NC) RED(NC) BLACK

BLACK

BLUEMODULERF PORT

RF KIT (sold separately)

4 PIN BLACK CABLE

MODULE RF PORT

RF KIT (included with the HC1 & HC2)

ANTENNA


>>

01

02

ENGINESTARTSTOP

OFF ACC ON STARTON

03

04

05

ENGINESTARTSTOP

OFF ACC ON STARTOFF

06

>>

VALET MODE PROGRAMMING PROCEDURE - 1 OF 1

NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.

Time restriction. Complete next step within 7 seconds.

Cycle ignition ON twice [2x OFF/ON] rapidly.

Press and release the BRAKE pedal three times [3x].

Parking Light will fl ash once [1x] then will fl ash twice [2x].

Set ignition to OFF position.

Valet Mode Programming Procedure completed.

To exit valet mode: repeat steps 1 to 5.


of 17• 20151001


>>

01

ENGINESTARTSTOP

OFF ACC ON STARTON

02

03

04

>>

05

06

07

ENGINESTARTSTOP

OFF ACC ON STARTOFF

08

AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.

Set ignition to ON position.

Press and release the antenna button, then press and hold the antenna button. The antenna’s leds will turn solid BLUE.

Parking Light will fl ash once [1x].

Press once [1x] on LOCK button of aftermarket remote. The antenna’s leds will fl ash BLUE once [1x].

To program additional remotes: repeat step 5 using each additional remote.

Release the antenna button. The antenna’s leds will turn OFF.

Wait, Parking Light will fl ash twice [2x].

Set ignition to OFF position.

Aftermarket Remote Programming Procedure completed.


of 17• 20151001


oNLINe MoDULe SeTTINgS - 1 OF 7

oPTIoNS SeTTINgS

01 -

REM

OTE

STAR

TER

OPT

ION

01 ENGINE/WAIT TO START

01 gaS02 DIESEL (GLOW PLUG)03 3 SEC04 5 SEC05 10 SEC06 15 SEC07 25 SEC08 45 SEC

02 ENGINE SENSING

01 TaCH02 TACHLESS03 ASSUME START (2)04 ASSUME START (2.5)05 ASSUME START (3)06 ASSUME START (4)07 ASSUME START (5)

03 RUN TIME

01 3 MIN02 5 MIN03 10 MIN04 15 MIN05 25 MIN06 30 MIN07 35 MIN

04 PROGRAMMABLE 4TH RELAY

01 IgNITIoN02 ACCESSORIES03 STARTER04 TRUNK05 PARKING

05 PROGRAMMABLE 5TH RELAY

01 IGNITION02 ACCESSORIES03 STARTER04 TRUNK05 PaRKINg

06 MT ACTIVATION SEQUENCE01 ReMoTe02 2X EBRAKE03 1X EBRAKE

07 MT SHUTDOWN SEQUENCE01 OPEN/CLOSE DOOR02 10 SEC AFTER OPEN/CLOSE DOOR03 ReMoTe

08 WEATHER MODE 01 DISaBLe

oPTIoNS SeTTINgS

01 -

REM

OTE

STAR

TER

OPT

ION

08 WEATHER MODE

02 EVERY 2 HOUR03 EVERY 3 HOUR04 EVERY 4 HOUR05 WITH TEMP SENSOR

09 TEMP SENSOR FOR COLD WEATHER

01 DISaBLe02 -20C/-4F03 -15C/5F04 -10C/14F05 -5C/23F

10 TEMP SENSOR FOR HOT WEATHER

01 DISaBLe02 25C/77F03 30C/86F04 35C/85F05 40C/104F

11 IDLE MODE01 DISABLE02 eNaBLe

12 TURBO TIMER

01 DISaBLe02 30 SEC03 1 MIN04 2 MIN05 4 MIN

13 TAKE OVER BEHAVIOUR01 eNaBLe02 SHUTDOWN WITH DOOR03 SHUTDOWN WITH UNLOCK

14 SECURE TAKE OVER DELAY

01 45 SeC02 90 SEC03 3 MIN04 4 MIN

15 FACTORY KEYLESS RS SEQUENCE

01 DISABLE02 HOLD LOCK 3 SEC03 LOCK, UNLOCK, LOCK04 LoCK, LoCK, LoCK

16 EXTERNAL RS INPUT TRIGGER (X-TRIG

01 DISaBLe02 SINGLE PULSE (-)03 DOUBLE PULSE (-)(-)04 TRIPLE PULSE (-)(-)(-)

05 ANALOG FACTORY KEYLESS X-TRIGGER =LOCK INPUT DOOR(+) =UNLOCK INPUT

17 VALET MODE01 REMOTE OR 5 X IGNITION ON OR 2 X IGN. ON +

3 BRAKE02 REMOTE OR ANTENNA BUTTON ONLYDefault settings are listed in bold.


of 17• 20151001



oPTIoNS SeTTINgS

01 -

REM

OTE

STAR

TER

OPT

ION

17 VALET MODE

03 REMOTE OR ANTENNA OR 5 X IGN ON OR 2 X IGN ON + 3 BRAKE

04 REMOTE OR 5 X IGN ON

05 aNTeNNa oR ReMoTe oR 2 X IgN oN + 3 BRaKe

06 5 X IGN ON OR 2 X IGN ON + 3 BRAKE07 ANTENNA BUTTON ONLY

08 ANTENNA OR 5 X IGNITION ON OR 2 X IGN ON + 3 BRAKE

18 HEATED ACC CONTROL

01 AUX TRIGGER02 ALWAYS ON03 -10C/14F04 -5C/24F05 0C/32F06 4C/40F07 8C/46F08 12C/54f

19 COOLED SEATS CONTROL

01 AUX TRIGGER02 ALWAYS ON03 20C/68f04 24C/76F05 28C/82F06 32C/90F07 36C/96F

20 RS PARKING LIGHTS CONFIRMATION

01 DISABLE02 CoNSTaNT03 FLASHING

21 CRANK TIME ADJUSTMENT (TACH)

01 DISaBLe02 +0.2 SECOND TO CRANK03 +0.6 SECOND TO CRANK04 -0.2 SECOND TO CRANK

22 REMOTE STARTER01 DISABLE02 eNaBLe

02 -

DO

OR

LOCK

OPT

ION

01 DOORLOCK ANALOG OUTPUT DURATION

01 0.4 SEC 02 0.8 SeC03 2 SEC04 4 SEC

02 TRUNK ANALOG OUTPUT DURATION

01 0.4 SEC 02 0.8 SeC03 2 SEC04 4 SEC

oPTIoNS SeTTINgS

02 -

DO

OR

LOCK

OPT

ION

03 PRIORITY UNLOCK01 DISaBLe02 ENABLE

04 DOUBLE PULSE LOCK01 DISaBLe02 ENABLE

05 DOUBLE PULSE UNLOCK01 DISaBLe02 ENABLE

06 AUTO RE-LOCK01 DISaBLe02 ENABLE

07 UNLOCK BEFORE START01 DISaBLe02 ENABLE

08 RE-LOCK AFTER START01 DISaBLe02 ENABLE03 SMART RE-LOCK

09 RE-LOCK AFTER RS SHUTDOWN01 DISaBLe02 ENABLE03 SMART RE-LOCK

10 LOCK AFTER MT SHUTDOWN SEQUENCE

01 DISaBLe02 ENABLE03 SMART RE-LOCK

11 LOCK AFTER TURBO MODE01 DISaBLe02 ENABLE

12 IGNITION CONTROLLED DOORLOCK

01 DISaBLe02 ENABLE03 ENABLE 2000 RPM

13 IGNITION CONTROLLED DOORLOCK SETTING

01 LoCK + UNLoCK02 LOCK ONLY03 UNLOCK ONLY

14 TRUNK SEQUENCE01 DISaRM, UNLoCK aND TRUNK02 DISARM AND TRUNK03 TRUNK ONLY

15 ANALOG REARM TRIGGER

01 afTeR STaRT, SHUTDoWN aND fIRST LoCK02 AFTER SHUT DOWN AND FIRST LOCK03 AFTER START ONLY04 AFTER SHUTDOWN ONLY

16 ANALOG DISARM SEQUENCE01 DISaRM oNLY02 DISARM WITH IGN CYCLE

17 DL PARKING LIGHTS CONFIRMATION

01 DISABLE02 eNaBLe03 ENABLE WITH IGNITION ONLY04 ENABLE WITHOUT IGNITION

Default settings are listed in bold.


of 17• 20151001



oPTIoNS SeTTINgS

03 -

ALA

RM

/SEC

UR

ITY

OPT

ION

01 ALARM01 DISaBLe02 ENABLE

02 ALARM DURATION01 30 SEC02 60 SeC03 120 SEC

03 ALARM TRIGGERED BEHAVIOR01 No DeLaY02 DELAY WITH PARKING LIGHTS 03 DELAY WITH PARKING LIGHTS AND CHIRPS

04 PASSIVE ALARM/LOCKS

01 ACTIVE ONLY02 ALARM & LOCKS03 aLaRM oNLY04 LOCKS ONLY

05 PASSIVE ALARM/AUTO-RELOCK NOTI

01 DISaBLe02 ALARM & LOCKS03 ALARM ONLY04 LOCKS ONLY

06 PASSIVE ALARM/AUTO-RELOCK TIMING

01 30 SeC02 60 SEC03 5 MIN04 10 MIN

07 PASSIVE OPEN ZONE BYPASS (FORCE

01 DISaBLe02 ENABLE

08 OPEN ZONE NOTIFICATION

01 DISABLE02 eNaBLe03 15 SEC DELAY04 20 SEC DELAY05 25 SEC DELAY06 30 SEC DELAY07 35 SEC DELAY

09 CONFIRMATION CHIRP (HORN OUTPUT)

01 DISABLE02 LOCK ONLY03 DoUBLe LoCK oNLY04 LOCK AND UNLOCK05 UNLOCK ONLY06 LOCK, UNLOCK, START07 DOUBLE LOCK, START

10 CONFIRMATION CHIRP (SIREN OUTPUT)

01 DISABLE02 LOCK ONLY03 DOUBLE LOCK ONLY

oPTIoNS SeTTINgS

03 -

ALA

RM

/SEC

UR

ITY

OPT

ION

10 CONFIRMATION CHIRP (SIREN OUTPUT)

04 LoCK aND UNLoCK05 UNLOCK ONLY06 LOCK, UNLOCK, START07 DOUBLE LOCK, START

11 RESERSED FOR FUTURE USE 01 N/A

12 CHIRP PULSE DURATION (HORN AND

01 20 MS02 30 MS03 40 MS04 45 MS05 50 MS06 60 MS07 100 MS

13 SHOCK SENSOR INPUT BEHAVIOUR

01 DISABLE02 eNaBLe03 WARN AWAY ONLY04 SHOCK ONLY

14 ANALOG SENSOR (-) INPUT BEHAVIOUR

01 DISaBLe02 WARN AWAY ONLY (-)03 SHOCK(-)04 NORMALY CLOSED ALARM(+)05 ZONE 2 PASSIVE 15(-)06 ZONE 2 PASSIVE 30(-)

15 ALARM CONTROL FROM OEM KEYLESS

01 DISABLE02 eNaBLe

16 LED FLASHING01 DISABLE02 eNaBLe (IgNITIoN off oNLY)03 FOLLOW ALARM STATUS

17 ALARM/PANIC WITH PARKING LIGHTS

01 DISABLE02 eNaBLe

18 CAR FINDER DURATION

01 5 SeC02 10 SEC03 15 SEC04 60 SEC

19 STARTER KILL/ANTI-GRIND

01 aNTI-gRIND + aCTIVe SK02 ANTI-GRIND ONLY03 ANTI-GRIND+ PASSIVE SK 30 SECONDS04 ANTI-GRIND+ PASSIVE SK 60 SECONDS



of 17• 20151001



oPTIoNS SeTTINgS

04 -

AU

X O

PTIO

N

01 TRANSMITTER AUX 1

01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTo 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST


01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTO 104 PTo 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST


01 LefT SLIDe DooR02 RIGHT SLIDE DOOR03 PTO 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST

04 TRANSMITTER AUX 4 01 LEFT SLIDE DOOR

oPTIoNS SeTTINgS

04 -

AU

X O

PTIO

N


02 RIgHT SLIDe DooR03 PTO 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST


01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTO 104 PTO 205 PTO 306 PTO 407 CaR fINDeR08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST

05 -

AU

X O

PTIO

N

01 POC 1

01 UNLoCK oTHeRS02 DEFROST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 109 PTO110 PTO211 PTO312 PTO413 ARM14 DISARM15 LOCK



of 17• 20151001



oPTIoNS SeTTINgS

05 -

PO

C O

PTIO

N

01 POC 1

16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER

02 POC 2

01 UNLOCK OTHERS02 DefRoST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 N/A09 PTO110 PTO211 PTO312 PTO413 N/A14 ARM15 DISARM16 LOCK17 UNLOCK18 TRUNK19 GWR20 LSD21 RSD22 RAP SHUTDOWN

03 POC 3

01 UNLOCK OTHERS02 DEFROST03 HoRN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 309 PTO110 PTO2

oPTIoNS SeTTINgS

05 -

PO

C O

PTIO

N

03 POC 3

11 PTO312 PTO413 ARM14 DISARM15 LOCK16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER

04 POC 4 (LOW CURRENT WHEN ACTIVE)

01 STaRTeR KILL02 DEFROST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 409 PTO110 PTO211 PTO312 PTO413 ARM14 DISARM15 LOCK16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER



of 17• 20151001



oPTIoNS SeTTINgS

06 -

PU

LSE

TIM

ER O

UTP

UT

OPT

ION

01 PTO 1 DURATION

01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED 5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH

02 PTO 2 DURATION


03 PTO 3 DURATION


04 PTO 4 DURATION

01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH

oPTIoNS SeTTINgS

07 -

INPU

T SO

UR

CE

01 BRAKE01 ANALOG02 DATA03 aUTo

02 DOOR01 ANALOG02 DATA03 aUTo

03 TACH01 ANALOG02 DATA03 aUTo

04 HOOD

01 ANALOG02 DATA03 aUTo04 ANALOG INVERTED

05 TRUNK01 ANALOG02 DATA03 aUTo

06 GLOW PLUG01 ANALOG02 DATA03 aUTo

07 E-BRAKE01 ANALOG02 DATA03 aUTo

08 TEMPERATURE01 ANALOG (TEMP SENSOR)02 DATA (FROM CAR)03 aUTo

09 VSS01 DISABLE02 aUTo



of 17• 20151001




oPTIoNS SeTTINgS

08 -

OU

TPU

T SO

UR

CE

01 ARM 01 ANALOG02 aNaLog/DaTa

02 DISARM01 ANALOG02 aNaLog/DaTa

03 LOCK01 ANALOG02 aNaLog/DaTa

04 UNLOCK ALL 01 ANALOG02 aNaLog/DaTa

05 UNLOCK DRIVER DOOR01 ANALOG02 aNaLog/DaTa

06 TRUNK01 ANALOG02 aNaLog/DaTa

07 LEFT SLIDING DOOR01 ANALOG02 aNaLog/DaTa

08 RIGHT SLIDING DOOR01 ANALOG02 aNaLog/DaTa

09 PARKING LIGHTS01 ANALOG02 aNaLog/DaTa

10 RAP SHUT DOWN01 ANALOG02 aNaLog/DaTa

11 PANIC01 ANALOG02 aNaLog/DaTa

12 CAR FINDER01 ANALOG02 aNaLog/DaTa

13 DEFROST01 ANALOG02 aNaLog/DaTa

14 HORN 01 ANALOG02 aNaLog/DaTa

15 SLEEP STATUS ON LED01 DISaBLe02 ENABLE


of 17• 20151001


ReMoTe STaRTeR eRRoR CoDeS - 1 OF 1

ReMoTe STaRTeR eRRoR CoDeS:NoTeS

[X] N

UM

BeR

of

PaR

KIN

g LI

gHT

fLaS

HeS

DIa

gNo

STIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine running. 02 Key in ignition at ON position.

II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.

03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.

ReMoTe STaRTeR SHUTDoWN eRRoR CoDeS:NoTeS

[Y] N

UM

BeR

of

PaR

KIN

g LI

gHT

fLaS

HeS

DIa

gNo

STIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine tach signal is lost.02 Emergency brake is lost.

II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.

The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.

03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.


of 17• 20151001


MoDULe DIagNoSTICS - 1 OF 1

TeST MoDULe

LeD

1 S

TaTU

S

DIa

gNo

STIC

I DURING PROGRAMMING

Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.

II DURING REMOTE START

Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.

III WITH IGNITION OFF

Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.


of 17• 20151001


>>

01

02

03

04

05

06

07

08

>>

MODULE RESET PROCEDURE - 1 OF 1

The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.

Disconnect all connectors from module except the BLACK 20-PIN connector.

Disconnect the BLACK 20-PIN connector.

PRESS AND HOLD the module’s programming button while connecting the BLACK 20-PIN connector.

Wait, LED 1 will flash RED. RELEASE programming button.

LED 1 will turn RED for 2 seconds.

Module RESET completed.

Reconnect all connectors.

Repeat programming procedure.

Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.


of 17• 20151001


Document numbeR



install guiDe2000-2006 Mazda MPV STd key aT

haRDwaReadS-HCX

accessoRies adS-USB (OPTIONaL)adS-WLM-aN1/adS-WLM-aP1 (OPTIONaL)dRONe MOBILe dR-2000 (OPTIONaL)COMPaTIBLe RF-kIT (OPTIONaL)

fiRmwaReadS-HCX(RST)-Ma-[adS-HCX]



02A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

BC

D

E

F

www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN

Page 2 of 7• 20151001


M3

M1

M2 M5M4

1

1

1321104115129876

02A_v1_[W]

1

13

2

14

3

15

4

16

5

17

6

18

7

19

8

20

9

21

10

22

11

23

12

24

12

910

3

11

4

12

5

13

6

14

8

16

7

15

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

PARKING LIGHT (-) BROWN/WHITE - 13

12V (+) WHITE/BLACK

ACCESSORY (+) BLACK/RED

ARM/DISARM (MUX) LTGREEN - 14

BRAKE (+) GREEN/YELLOW

TACH (AC) PURPLE/WHITE

IGNITION SWITCH (A)

IMMOBILIZER, NEAR STEERING COLUMN (B)

DOORLOCK MODULE (C)

BRAKE SWITCH (D)

HEADLAMP SWITCH (D)

DIAGNOSTIC CONNECTOR (F)

IMMO. (DATA) BLUE/WHITEOR BLUE/BLACK - 05

STARTER (+) BLUE/YELLOW

IGNITION (+) BLUE

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE06 WHITE

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.

IGNITION (+) BLACK/WHITE - 07

1K


Page 3 of 7• 20151001


01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04OFF

ACC ONSTART

05OFF

ACC ONSTART

06

07

08

09

10

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Insert key into ignition.

Turn key to START position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.


Page 4 of 7• 20151001


>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.


Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.


Page 5 of 7• 20151001


INSTaLLaTIoN CHeCKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?

YES: Go to next step.

¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?



5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.


¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.


8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

¨

Question 6: Does the vehicle remote start?


¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨

Question 7: Does the vehicle shut down?


¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?


¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.


¨


YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

¨ NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.

18 Press brake pedal.

¨



¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHeCKLIST - WITH afTeRMaRKeT KeYfoB


Page 6 of 7• 20151001



CHeCKLIST - WITH oeM KeYfoB



3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

¨



¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨



¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?


¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.



¨




9 Close hood.



12 Wait for the vehicle to start.


¨¨



NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.



Page 7 of 7• 20151001


Document numbeR



install guiDe2001-2004 Mazda Miata Std key at

haRDwaReadS-HCX

accessoRies adS-USB (OPtiONaL)adS-WLM-aN1/adS-WLM-aP1 (OPtiONaL)dRONe MOBiLe dR-2000 (OPtiONaL)COMPatiBLe RF-kit (OPtiONaL)

fiRmwaReadS-HCX(RSt)-Ma-[adS-HCX]



01A_v1_[W]

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

AB

D

C

E


Page 2 of 7• 20151001


M3

M1

M2 M5M4

1

1

1321104115129876

01A_v1_[W]

1

6

2

789

3

10

4

11

5

12

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

M5

M4

M1

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW

12V (+) WHITE/RED

ACCESSORY (+) BLACK/RED

ARM/DISARM (MUX) RED/BLUE - 09

TACH (AC) GREEN/TAN

PARKING LIGHT (+) RED/BLACK

TRUNK RELEASE (-) RED/WHITE

BRAKE (+) GREEN

IGNITION SWITCH (A)

IMMOBILIZER, NEAR STEERING COLUMN (B)

DOORLOCK MODULE (C)

DRIVER KICK PANEL (D)

DIAGNOSTIC CONNECTOR (E)

IMMO. (DATA) RED/BLACK - 05

STARTER (+) WHITE/BLACK

IGNITION (+) BLUE

04 PINK/WHITE

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)

05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND

06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK

01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.

IGNITION (+) BLACK/WHITE - 07

1K


Page 3 of 7• 20151001


01OFF

ACC ONSTART

02OFF

ACC ONSTART

03

04OFF

ACC ONSTART

05OFF

ACC ONSTART

06

07

08

09

10

MODULE PROGRAMMING PROCEDURE - 1 OF 1


Turn key to START position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Turn key to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will fl ash GREEN.

Module Programming Procedure completed.


Page 4 of 7• 20151001


>>

01

02OFF

ACC ONSTART

03OFF

ACC ONSTART

04

05

>>

TAKEOVER PROCEDURE - STD KEY - 1 OF 1

All vehicle doors must be closed and locked prior to remote start sequence.

Press unlock on OEM or aftermarket remote.


Turn key to ON position.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.


Page 5 of 7• 20151001





3 Press the LOCK button once [1x] on the aftermarket keyfob.

¨

Question 1: Do the doors lock?



4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

¨

Question 2: Do the doors unlock?



5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

¨

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.


¨

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.



¨

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.



¨



¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

¨



¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

¨

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?


¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.



¨




14 Close hood.


16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.


¨



¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.


CHeCKLIST - WITH afTeRMaRKeT KeYfoB


Page 6 of 7• 20151001



CHeCKLIST - WITH oeM KeYfoB




¨



¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

¨



¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

¨

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?


¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.



¨




9 Close hood.



12 Wait for the vehicle to start.


¨¨



NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.



Page 7 of 7• 20151001

product guide - idatalink

Documents