product introduction - microsoft · fuse and fault current limiting fuse, it can prevent damage to...

1Pr

oduc

t Int

rodu

ctio

n

PRODUCT INTRODUCTIONInternational Electric

Asea E&TJungwon Electric Systms

Jinkwang E&C

2

PRODUCT INTRODUCTION

Prod

uct I

ntro

duct

ion

Chairman Kim, Bong Hyun

International Electric Co., Ltd. was founded in 1946 and celebrates its 69th corporate anniversary this

year. After developing its first traction transformer in 1979, the company has had an unrivaled advance

in the field of special transformers for trains and has also increased its domestic market share in the

heavy electric machinery field. Not satisfied, however, the company is making efforts to jump into

overseas exports. After acquiring Jin Kwang E&C Co. Ltd. in 2014, 4 companies including ASEA E&T Co.,

Ltd., Jungwon Electric Systems Inc., and International Electric Co., Ltd. have become one family.

Through the acquisition of related companies, it is strengthening not only the field of special trans-

formers, but also other electronic fields such as switches, UPS, inverters, rectifiers, and battery chargers.

As it entered a technology introduction contract with the American firm Emerson in 1984 and became

designated as a systematized enterprise specializing in power plants by the government, it has made

efforts for exportation by obtaining PS and UL marks while bringing in various technologies such as

high pressure generators for electric precipitators, Thyristor digital control method, and high voltage

power source for electric precipitators through a technology agreement with Origin Electric in the 90s.

With the establishment of an enterprise annex research institute in 1994 as a foundation, the company

was designated as a ‘Q-Class’ nuclear power plant firm and grew as a core enterprise of the national

power industry. Also, the company arranged production facilities for molded transformers and started

sales in 2009. It endlessly seeks change and challenges as a transformer manufacturer.

We intend to promote the main products of International Electric and its affiliates through this product

introduction catalogue.

Thank you.

CEO Message

3Pr

oduc

t Int

rodu

ctio

n

Contents

Power Transformers

Power Equipments

Power Electronics

Contact Information

04

09

13

23

Power Transformer, Cast Resin Transformer, Distribution Transformer, Pole Mounted Transformer, PAD Transformer, Main Transformer for Electromotive Car, Dry Type Transformer / Reactor for SIV, Dry Type Neutral Grounding Reactor, Dry Type Transformer (UPS, B/CH, AVR)

Induction Voltage Regulator (IVR), Automatic Step Voltage Regulator (SVR), Gas Insulated Vacuum Recloser, Pole Mounted Epoxy-molded Vacuum Recloser, Gas Insulated Sectionalizer

Uninterruptible Power System (UPS), Automatic Voltage Regulator (AVR), High Voltage Generator for Electrostatic Precipitator (EP), Battery Charger, Inverter, Rectifier (Dry and Oil Type)

International Electric Co., Ltd.Asea E&TJungwon Electric Systems Inc.Jinkwang E&C Corporation


4


Prod

uct I

ntro

duct

ion


Power Transformer

Cast Resin Transformer

Constant : Single-phase, Three-phaseFrequency : 50, 60HzCapacity : 60MVA or lowerVoltage : 69KV or lower


Since epoxy resin is molded in vacuum state, it is very resistant tohumidity and environment-friendly. In addition, it uses specially treated glass for excellent mechanical strength.

It maintains optimal state of insulation thanks to the coil surfacetreated with special finishing work.

Since it is of superior self-extinguishability, there is no risk of fire conduction and poisonous gas during combustion. Its partial discharging value is low due to the latest vacuum casting technology applied (lower than 10pC)

Power transformer is a device to transmit power from power plant to substation. It is widely used in industrial faculties such as substations and factory.

It is manufactured in accordance with international standard and KS Standards. We customize our design of power transformerto customer’s specifications to meet their satisfaction.

Power Transformers

5Pr

oduc

t Int

rodu

ctio

n

Pole Mounted Transformer

Constant : Single-phaseCapacity : 10 - 150KVA Voltage : 36KV or lower Frequency : 50, 60HzType : Oil, Amorphous Core

Pole transformer is installed in the distribution lines of KEPCO. It is usually installed on electric poles to lower high voltage.

Distribution Transformer


Distribution transformer functions to receive high voltage fromdistribution lines and supply necessary voltage to users.

It is divided into indoor and outdoor distribution transformer. We customize production to customers’ order and needs.

6


Prod

uct I

ntro

duct

ion

PurposeIt is a dry type transformer installed in power supply unit for UPS

SpecificationsRated Capacity : 150KVA – 1,000KVAInput/Output Voltage : 220 - 480AC / 216 - 540VACInsulating Class : B, F, H ClassFrequency : 50, 60Hz

Characteristics- Environment-friendly (highly efficient, small in size, light and low noise)- Long life cycle and solid structure Major ClientKEPCO, KHNP, Thermal Power Plant, etc.

Dry Type Transformer for UPS, B/CH, AVR


Power Transformers

Constant : Single-phase, Three-phaseFrequency : 50, 60HzCapacity : Less than 3000KVAVoltage : Less than 36KV

On-ground transformer is designed for underground distribution facility, streetlights, place adjacent to residential area, school, building, hospital and factory. It is possible to install it near downtown load area. Since it is equipped with protection fuse and fault current limiting fuse, it can prevent damage to transformer and error expansion in case of error in transformer. External power connection unit is designed to be completely insulated. It has radian and loop type transformer. In addition, it can be structured in both open and close type.

PAD Transformer

7Pr

oduc

t Int

rodu

ctio

n

PurposeIt receives AC 25K high voltage current from wire (Catenary), changes it to necessary voltage and transmits power to main electric motor through main power converter at secondary (conventional) side or to auxiliary circuit through auxiliary power supply system at the third (tertiary) side.

Specifications1) Rated Capacity : 20KVA – 8900KVA2) Input/Output Voltage : 25000V-840-1548V-221V/25000V-840V-929V AC3) Constant : Single-phase, Three-phase4) Frequency : 50, 60Hz Capacity : Less than 3000KVA Voltage : Less than 36KV

CharacteristicsOur company produced transformer for railway vehicle first in Korea and is currently developing next-generation train main transformer,emerging as market reader in the domestic market.

Major ClientKorea Railroad Corporation, Hyundai Rotem and others.

Main Transformer for Electromotive Car

8


Prod

uct I

ntro

duct

ion


PurposeNGR is a reactor to limit ground fault current at secondary neutron point of power transformer. 3Ø 45/60MVA 154KV/22.9KV, KEPCOApplied standard : IEC60289, IEC60076-11

StandardsReactance : 0.6Ω(60Hz)Continuous current : 300AShort Time Current : 10,000A/10 sec.Insulating Class : H Class (dry type)Peripheral Temperature : -25℃ - 40℃

Characteristics- Independent air core structure supported with base insulator on ground- Strong enough to resist to electron mechanical power in case that current flows in- Highly efficient ventilation structure

PurposeIt is a dry type transformer installed in the auxiliary power supply(APS) of railway vehicle. It adopts APS circuit system : 2 level-voltage type PWM inverter.

Specifications1) Rated Capacity : 125KVA – 160KVA2) Input/Output Voltage : 100-700V/40-100 AC3) Frequency : 50, 60Hz

Characteristics- Environment-friendly (highly efficient, small in size, light and low noise)- Degree of waterproof level: IPX5

Major ClientMELCO (Mitsubishi, Japan), Woojin Industrial Systems Co. and others

Dry Type Transformer/Reactor for SIV

Dry Type Neutral Grounding Reactor

Power Transformers

9Pr

oduc

t Int

rodu

ctio

n


Power Equipments

Induction Voltage Regulator (IVR)

high voltage IVR low voltage IVR

Purpose

Standards

Characteristics

Instrument for various electric testsVariable regulator for industrial voltage and current Industrial machinery and tools and system necessary for various uninterrupted voltage

Type : motor driven voltage stabilizerPhase No : Three-phase and three-wire, Single-phaseFrequency : 50, 60Hz Capacity : 10KVA – 2000KVA (self-cooled type: CNAN)Voltage : 220VAC – 13,200VACControl Range : Out Voltage +/-10% - +/- 100%Efficiency : Above 95%Ambient Temperature : -20℃ - +40℃

On-load Stepless Voltage VariationUsing high-magnetic-inductivity silicon steelMicroprocessor-controlledRemote monitoring function via RS232,485,422

10


Prod

uct I

ntro

duct

ion


Automatic Step Voltage Regulator (SVR)

Power Equipments

PurposeBased on our long-cumulated know-how and experience, PVRis the product that we succeeded in developing first in Koreaunder technology introduction contract with U.S. Cooper Power System.

SpecificationsConstant : Single-phaseVoltage : 11, 22, 33KV±10%Current : Up to 640ABIL : 95, 150, 200Frequency : 50, 60Hz Tank Type : Round, SquareTap Changer : 32 Steps

CharacteristicsThis regulator maintains phase-to-phase voltage within a certainrange and helps motor, lights and machine run properly.

Picture of Installation Case(PVR 7000KVA)

11Pr

oduc

t Int

rodu

ctio

n

Gas Insulated Vacuum Recloser

Pole Mounted Epoxy-Molded Vacuum Recloser

TypeRated voltage(kV)Rated current(A)Rated power frequency withstand voltage(kV)Rated lightning impulse withstand voltage(kV)Rated short-time current(kA, RMS)Rated symmetrical interrupting current(kA, RMS)Rated short circuit making current(kA, peak)

Minimum operating current(A)

Operating MechanismMechanical endurance(times)Weight(kg)Applied Standard

TypeRated voltage(kV)Rated current(A)Rated power frequency withstand voltage(kV)Rated lightning impulse withstand voltage(kV)Rated short-time current(kA, RMS)Rated symmetrical interrupting current(kA, RMS)Rated short circuit making current(kA, peak)

Minimum operating current(A)

Operating MechanismMechanical endurance(times)Weight(kg)Applied Standard

SF6 Gas Insulated Vacuum Recloser

Pole Mounted Epoxy-Molded Vacuum Recloser

JK - REC24(25.8)

630

60

150

12.5/16

12.5/16

32.5/42

10(2) - 900(step: 1A)

5(2) - 900(step: 1A)

Magnetic actuator

10,000

190

ANSI C37.60

JK - MREC24(25.8)

630

60

150

12.5/16

12.5/16

32.5/42

10(2) - 900(step: 1A)

5(2) - 900(step: 1A)

Magnetic actuator

10,000

190

ANSI C37.60

12(15)

630

50

110

160

36(38)

630 / 800

70

170

280

36(38)

630 / 800

70

170

250

PhaseGround

PhaseGround

12(15)

630

50

110

160

12


Prod

uct I

ntro

duct

ion


Gas Insulated SectionalizerSF6 Gas Insulated Sectionalizer

Power Equipments

1s

10s

Phase

Ground

TypeRated voltage(kV)Rated current(A)Rated power frequency withstand voltage(kV)Rated lightning impulse withstand voltage(kV)Rated short circuit making current(kA, peak)

Rated short-time current(kA, RMS)

Minimum actuating current(A)

Inrush restraint multiplierMechanical endurance(times)Weight(kg)Applied Standard

JK - GACSBS24(25.8)

200 / 400 / 630

60

150

25 / 32.5

10 / 12.5

3.5

16, 24, 40, 56, 80, 112, 160, 224, 256,

300, 448, 640, Bypass

3.5, 7, 18, 28, 40, 56, 80, 112, 160,

224, 320, Block

1, 2, 4, 6, 8, Block

5,000

200

ANSI C37.63 / IEC 60265-1 / IEC 60694

12(15)

50

110

180

36(38)

70

170

220

13Pr

oduc

t Int

rodu

ctio

n

Uninterruptible Power System (UPS)

N+1 parallel operation Online double conversion DSP controlInput THDi: <3%Voltage options of storage battery: 16/19/20PCSLoad power factor: 0.9PFInput voltage tolerance range: 120 - 276VacInput frequency tolerance range: 54 - 66HzEnergy-saving ECO modeSelf-monitoring USP startAngular interface (SNMP, Relay Card, Parallel Card

Relay Card

(SNMP)

Parallel Card

Battery Cabinets (Optional)Control Panel Rear Side

ESCORT-2600 Series10 - 20kVA

3:1phase PF:0.9

ESCORT-1600 Series6 - 10kVA

1:1phase PF:0.9


Power Electronics

Characteristics

14


Prod

uct I

ntro

duct

ion


Power Electronics

E1600_6kVA(S) E1600_6kVA(H)6k / 5.4k

220/230/240Vac120~276Vac

50Hz:45~55Hz;60Hz:54~66Hz(auto sensing)>0.99

Max.voltage:220V:+25%(optional+10%,+15%,+20%)230V:+20%(optional+10%,+15%)

240V:+15%(optional+10%)Min.voltage:-45%(optional -20%,-30%)

Same as the bypass<3%(100% Linear load)

Support

220/230/240Vac0.9

±1%±1%/±2%/±4%/±5%/±10% of the rated frequency(optional)

50/60(±0.1)Hz3:1

<2% with Linear Load , <5% with non-linear load>93.5%

±96/108/120Vdc (optional)6~8 hours(to 90% of full capacity)

1A(Standard unit);Long run unit Max.current 10A(charge current can be set according to battery capacity installed)

Mains to Battery:0ms;Mains to Bypass:0msLoad<110%:last 60min, <125%:last 10min,<150%:last 1min, >150% turn to bypass mode immediately

Hold Whole SystemLine Mode: Turn to Bypass; Backup Mode: Shut down UPS immediately

Alarm and Switch offUpon Power On and Software Control

Advanced Battery ManagementLine Failure, Battery Low, Overload, System Fault

Line Mode, Bat. Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS FaultInput Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage,

Inner Temperature & Remaining Battery Backup TimeDry contact, USB, SNMP card(optional), Parallel card(optional), Relay card(optional)

0℃~40℃-25℃~55℃

0~95%(non-condensing)<1500m<55dB

502×250×616

IEC/EN62040-1, IEC/EN60950-1IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8

MP-BT Series2×20pcs/7Ah(9Ah)

597×250×616122/134

ModelCapacity (VA/Watts)INPUTNominal voltageOperating voltage rangeOperating frequency rangePower factor

ECO rangeHarmonic distortion(THDi)Generator inputOUT PUTRated voltagePower factorVoltage regulation

Crest factorHarmonic distortion(THD)EfficiencyBATTERYBattery voltageTypical recharge timeCharge currentSYSTEM FEATURESTransfer time

Short circuitOverheatLow battery voltageSelf-diagnosticsBatteryAudible&Visual alarmsLED&LCD DISPLAY

Communication interfaceENVIRONMENTALOperating temperatureStorage temperatureHumidity rangeAltitudeNoise levelPHYSICALDimension D×W×H(mm)Net weight (kg)STANDARDSSafetyEMCBATTERY BANKModelBattery type&max.quantityPHYSICAL OF BATTERY BANKDimensions D×W×H(mm)Net weight (kg)

10k / 9kE1600_10kVA(S) E1600_10kVA(H)

40A(Breaker)

62 / 18

Line ModeBat. Mode

Line ModeBypass Mode 60A(Breaker)

64 / 20

Technical Specifications

Bypass voltage range

Frequency

Overload

LCD display

Specifications are subject to change without prior notice.

15Pr

oduc

t Int

rodu

ctio

n


380/400/415Vac;(3Ph+N+PE)208~478Vac

50Hz:45~55Hz;60Hz:54~66Hz(auto sensing)>0.99

Max.voltage:220V:+25%(optional+10%,+15%,+20%)230V:+20%(optional+10%,+15%)

240V:+15%(optional+10%)Min.voltage:-45%(optional -20%,-30%)

Frequency protection range: ±10%Same as the bypass

<5%(100% Linear load)Support

220/230/240Vac0.9

±1%±1%/±2%/±4%/±5%/±10% of the rated frequency(optional)

50/60(±0.1)Hz3:1

<2% with Linear Load , <5% with non-linear load

±96/108/120Vdc (optional)12V/7Ah

6~8 hours(to 90% of full capacity)1A(10kVA Standard unit); Max.current 10A(Long run unit)

Mains to Battery:0ms;Mains to Bypass:0msLoad<110%:last 60min, <125%:last 10min,<150%:last 1min, >150% turn to bypass mode immediately

Hold Whole SystemLine Mode: Turn to Bypass; Bat. Mode: Shut down UPS immediately

Alarm and Switch offUpon Power On and Software Control

Advanced Battery ManagementLine Failure, Battery Low, Overload, System Fault

Line Mode, Bat. Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS FaultInput Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage,

Inner Temperature & Remaining Battery Backup TimeDry contact, USB, SNMP card(optional), Parallel board(optional), Relay card(optional)

0℃~40℃-25℃~55℃

0~95%(non-condensing)<1500m

IEC/EN62040-1, IEC/EN60950-1IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,IEC61000-4-5,IEC61000-4-6,IEC61000-4-8

MP-BT Series2×20pcs/7Ah(9Ah)

597×250×616122/134

ModelCapacity (VA/Watts)INPUTNominal voltageOperating voltage rangeOperating frequency rangePower factor

Bypass frequency rangeECO rangeHarmonic distortion(THDi)Generator inputOUT PUTRated voltagePower factorVoltage regulation

Crest factorHarmonic distortion(THD)EfficiencyBATTERYBattery voltageCapacity (standard unit)Typical recharge timeCharge currentSYSTEM FEATURESTransfer time

Short circuitOverheatLow battery voltageSelf-diagnosticsBatteryAudible&Visual alarmsLED&LCD DISPLAY

Communication interfaceENVIRONMENTALOperating temperatureStorage temperatureHumidity rangeAltitudeNoise levelPHYSICALDimension D×W×H(mm)Net weight (kg)STANDARDSSafetyEMCBATTERY BANKModelBattery type&max.quantityPHYSICAL OF BATTERY BANKDimensions D×W×H(mm)Net weight (kg)

E2600_10kVA S/H10k / 9k

63A(Breaker)

E1600_15kVA15k / 13.5k

100A(Breaker)

E1600_20kVA20k / 18k

125A(Breaker)

>93.5%

Line ModeBat. Mode

Line ModeBypass Mode

>94.5%

<55dB

597×250×655(S)/502×250×616(H)76(S)/35(H)

<58dB

502×250×61645 46

Frequency

Overload

LCD display

Bypass voltage range


16


Prod

uct I

ntro

duct

ion


UPS Cabinet Control Panel Module Control Panel

Single module(3U)

6kVA/10kVA 1:1 phase6kVA/10kVA 3:1 phase

10kVA/15kVA/20kVA/25kVA/30kVA/40kVA 3:3 phase

3U Battery Box (Optional)

Uninterruptible Power System (UPS)

Online high frequency switching double conversionAdvanced PFC technology3U frame, lag-mounted typeEPO functionHigh input voltage toleranceDSP controlDistributed parallel controlABM functionProtection from thunderbolt, surge, cut circuit and overloadLCD and LED display in both Korean and EnglishEMI/RFI noise filterSupport RS232 and SNMP

Battery Cabinets(Optional)

ESCORT-3000 Series (6~1560kVA)E1160 / E1110

E3106 / E3110

E3310 / E3315 / E3320 / E3325 / E3330 / E3340 / E3352 / E3380 / E33104 / E33156

1 : 13 : 13 : 3

Power Electronics

Characteristics

17Pr

oduc

t Int

rodu

ctio

n

40~70Hz >0.99

Max.voltage:220V:+25%(optional+10%,+15%,+20%) 230V:+20%(optional+10%,+15%) 240V:+15%(optional+10%)Min.voltage:-45%(optional -20%,-30%)

Frequency protection range: ±10%

Support

±2%

1. Line Mode: ±1%, ±2%, ±4%, ±5%, ±10% of the rated frequency (optional) 2. Battery Mode: (50/60±0.1%)Hz

3:1<2% with linear Load, <5% with non-linear load

6A(Max.)(charge current can be set according to battery capacity installed)Depends on the capacity of external batteries

Utility to Battery: 0ms; Utility to bypass: 0msLoad<110%:last 60min, <125%:last 10min,<150%:last 1min, >150% shut down UPS immediately

Hold Whole SystemComplies with EN62040-2

1. UPS cabinet: RS232, RS485, Dry Contact, Intelligent slot ×2(SNMP card, Relay Card optional)2. UPS module: RS232

0℃~40℃-25℃~55℃


443×580×131 (3U)

IEC/EN62040-1, IEC/EN60950-1IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,

IEC61000-4-5,IEC61000-4-6,IEC61000-4-8


220/230Vac120~276Vac

380/400/415Vac,(3Ph+N+PE)208~478Vac

380/400Vac(3Ph+N+PE) or 220/230Vac208~478Vac or 120VAC-276Vac

2%(100% nonlinear load)5%(100% non-linear load)

380/400/415Vac,(3Ph+N+PE)

0.9/1(Customized)

220/230Vac

0.8

6k / 4.8k, 10k / 8k 10k/9k,15k/13.5k,20k/18k

150138

30A(Max.) 60A(Max.)60A(Max.) 30A(Max.)

840×600×1400

138

840×600×2000

213

840×600×2000

150

840×600×1400 840×600×1400

170

1100×600×2000

270

Load<110%:last 30S,<125%:last 1S,<150%:last 200ms,>150% shut down UPS immediately

Breaker(6kVA:40A / 10kVA:60A)

Load<110%:last 10min, <125%:last 1min, <150%:last 1S,>150% shut

down UPS immediatelyBreaker(10kVA:20A/15kVA:32A/20

kVA:40A)

<55dB

6kVA/23kg; 10kVA/25kg

<65dB

10kVA/26;15kVA/30kg;20kVA/31kg


Model

INPUTRated VoltageInput Voltage Tolerances RangeInput Frequency Tolerances RangeInput Power Factor

Harmonic distortion(THDi)Generator inputOUT PUTOutput voltageVoltage regulationPower factor

Crest factorHarmonic distortion(THD)EfficiencyBATTERY

Battery voltage

Charge currentBackup timeSYSTEM FEATURESTransfer time

Short circuitNose suppression

ENVIRONMENTALOperating temperatureStorage temperatureHumidity rangeAltitudeNoise levelPHYSICALDimension D×W×H(mm)Net weight(kg)STANDARDSSafety

EMC

UPS CabinetModule

UPS CabinetModule

UPS cabinetHPM moduleUPS cabinetHPM module

Line Mode

E1100-30K6~30k/4.8~24k

E3100-50K6~50k/4.8~40k

E1100-50K6~50k/4.8~40k

E3100-100K6~100k/4.8~80k

E3100-30K6~30k/4.8~24k

E3300-100K10~100k/9~90k

E3300-200K10~200k/9~180k

93.5%

±96\±108\±120Vac;Battery quantity(optional)

95.5%

±192\±204\±216\±228\±240Vdc; battery quantity(optional)

30A(Max.) 60A(Max.)

Capacity(VA/Watts)

Bypass Voltage Tolerances Range

Output frequency

Overload

Communication interface

Bat. Mode

Bypass Mode

18


Prod

uct I

ntro

duct

ion


Power Electronics


380/400/415Vac,(3Ph+N+PE)208~478Vac

40~70Hz>0.99

Max.voltage:220V:+25%(optional+10%,+15%,+20%) 230V:+20%(optional+10%,+15%) 240V:+15%(optional+10%)Min.voltage:-45%(optional -20%,-30%)

Frequency protection range: ±10%3%(100% non-linear load)

Support

380/400/415Vac,(3Ph+N+PE)±1%0.9

1. Line Mode: ±1%, ±2%, ±4%, ±5%, ±10% of the rated frequency (optional)2. Battery Mode: (50/60±0.1%)Hz

3:1<2% with linear Load, <5% with non-linear load

95.0%

±192\±204\±216\±228\±240Vdc; battery quantity(optional)

Depends on the capacity of external batteries

Utility to Battery: 0ms; Utility to bypass: 0msLoad<110%:last 60min, <125%:last 10min,<150%:last 1min, >150% shut down UPS immediately

Hold Whole SystemComplies with EN62040-2

1. UPS cabinet: RS232, RS485, Dry Contact, Intelligent slot ×2(SNMP card, Relay Card optional)2. UPS module: RS232

0℃~40℃-25℃~55℃


443×580×131 (3U)

IEC/EN62040-1, IEC/EN60950-1IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,

IEC61000-4-5,IEC61000-4-6,IEC61000-4-8

E3300-520K520k/468k

E3300-250K250k/225k25k/22.5k

E3300-300K300k/270k

30k/27k

E3300-800K800k/720k

E3300-400K400k/360k

E3300-1040K1040k/936k

E3300-1560K1560k/1404k

40k/36k

UPS CabinetModule

200A(Max.)60A(Max.)6A(Max.)

100A(Max.) 260A(Max.)130A(Max.) 390A(Max.)10A(Max.)


29032

31033

750 1600860 1810 2800

<70dB

600×1100×2000W D H W D H W D H W D H

1200×860×2000 3000×860×2000 4800×1100×2000

<73dB

35

Load<110%:last 30S,<125%:last 1S,<150%:last 200ms,>150% shut down UPS immediately

Load<110%:last 10min, <125%:last 1min, <150%:last 1S,>150% shut

down UPS immediately

UPS cabinetModuleUPS cabinetModule

Line Mode

Bat. Mode

Bypass Mode 40A 63A 100A

UPS CabinetModule

Overload

Communication interface

EMC

Output frequency

Bypass Voltage Tolerances Range

Capacity(VA/Watts)

Model

INPUTRated VoltageInput Voltage Tolerances RangeInput Frequency Tolerances RangeInput Power Factor

Harmonic distortion(THDi)Generator inputOUT PUTOutput voltageVoltage regulationPower factor

Crest factorHarmonic distortion(THD)EfficiencyBATTERYBattery voltageCharge currentBackup timeSYSTEM FEATURESTransfer time

Short circuitNose suppression

ENVIRONMENTALOperating temperatureStorage temperatureHumidity rangeAltitudeNoise levelPHYSICALDimension D×W×H(mm)Net weight(kg)STANDARDSSafety

19Pr

oduc

t Int

rodu

ctio

n

Highlights:100 kW rated power module500 kW rated power in single frameExtended power range: from 100 kW to 3MWUnity output power factor (kVA = kW)AC-AC efficiency up to 96 %Efficiency in eco-mode ≥ 99 %Online Swap Modularity (OSM)Online serviceabilityTop or bottom cable entry (standard)Built-in back-feed protection (standard)Graphical display on system levelDPA displays in each moduleMaintenance bypass switch (optional)

True Modularity up to 3MWNow you can have a UPS size to exactly fit your needs: The Concept-power DPA 500 is the only modular UPS on the market that can easily be scaled up to provide 3MW of clean, reliable power.

True Parallel ArchitectureReliability and availability are ensured by the Conceptpower DPA 500’s proven Decentralised Parallel Architecture (DPATM). Each module contains all the hardware and software required for full system operation. They share no common components. Each UPS module has its own independent static bypass, rectifier, inverter, logic control, control panel, battery charger and batteries. With all the critical components duplicated and distributed between individual units, potential single points of failure are eliminated.

Vertical scalability: one to five modules in one single cabinet

Horizontal scalability: cabinets in parallel configuration up to 3MW

ABB’s Conceptpower DPA 500 The UPS for those who need zero downtime

Online-swappable modules

Top cable entry

Bottomcable entry

Smartconnectioninterface

Inbuiltmaintenancebypass switch

Scalable up to 3MW

20


Prod

uct I

ntro

duct

ion


Power Electronics


21Pr

oduc

t Int

rodu

ctio

n

High Voltage Generator for Electrostatic Precipitator (EP)Constant : Single-phaseRectifying Method : Single-phase wave rectifying methodInput Voltage : 220 – 480VControl Power : 110VACOutput Voltage : DC30KV – 120KV / 100-2000mA

Automatic Voltage Regulator (AVR)

Constant : Single-phase, Three-phaseFrequency : 50, 60Hz Voltage - Input : 110VAC - 480VAC±15%- Output : 110VAC - 480VAC±2%Capacity : 500KVA max.

It adopts tap changing regulator that has less wave distortion than existing CVT that uses the magnetic saturation and resonance phenomenon ofmetal pin. It can maintain stable output voltage due to high-speed switching.

Low noise and light weight

Quicker response than existing CVT method in terms of load and inputchange

Major ClientNuclear plant (“Q”, “T”, “R” Class), KEPCO, Thermal Plant, etc.

High voltage generator for electrostatic precipitator (EP) consists of transformer for outdoor rectifier (T/R) and indoor control panel. Transformer for outdoor rectifier supplies high DC voltage and current necessary for electric precipitation. The output voltage of T/R should remain close to ignition point for effective work of electric precipitation.T/R consists of transformer, current limiting reactor and rectifier that is formed by single-phase half wave rectification, including high-speed switching. The parts embedded in oil tank should be completely sealed and painted for outdoor purpose. Control panel contains thyristor elements and all the electric parts necessary to protect and monitor high power units.

Major ClientThermal Power Plant, Chemical Power Plant, District Heating Corp., etc.

22


Prod

uct I

ntro

duct

ion


Power Electronics

Rectifier (Dry and Oil Type)

Composed of diode, SCR and IGBT rectifier element, rectifier receives single-phase or three-phase power and yields direct current. It is being more and more used in special power facility and safety power facility as industrial facility gets more precise and automated.

Major ClientNuclear Plant (“Q”, “T”, “R” Class), Thermal Plant, Chemical Plant, Iron and Steel Plant, etc.

Inverter

Battery Charger

Constant : Single-phaseFrequency : 50, 60Hz Voltage - Input : 120 - 480VAC- Output : 120 - 480VAC

Capacity : 20 - 2000A

Constant : Single-phase, Three-phaseFrequency : 50, 60HzVoltage - Input : 110 - 480VAC- Output : 24 - 200VDC

Capacity : 10 - 20000A

Voltage - Input : 125 - 600VDC- Output : 120 - 480VAC, 50, 60Hz

Capacity : 5 - 400KVA


Composed of diode, SCR and IGBT rectifier element, recharger receives Single-phase or three-phase power and yields direct current. It is be-ing more and more used in special power facility and safety power facility as industrial facility gets more precise and automated.


23Pr

oduc

t Int

rodu

ctio

n


To learn more about our products or to request for a quotation, please visit below websites or send us an e-mail.Thank you.

International Electric Co., Ltd. Main Office and Factory98, Shinkyechun-ro, Kumwang-up, Unsaung-kun, Northern Chungcheong Province, South KoreaTEL +82-43-883-7751 FAX +82-43-883-7773Sales Division3F Iksung Building, 6 Bongeunsa-ro 112-gil, Gangnam-ku, Seoul, KoreaTEL +822-465-7751 FAX +822-465-4809EMAIL [email protected] www.ieckr.com

Asea E&T Main Office and Factory261 Kobul-ro, Kwangju City, Kyunggi Province, South KoreaTEL +82-31-797-7677 FAX +82-31-797-7477EMAIL [email protected] www.aseaent.co.kr

Jungwon Electric Systems Inc. Main Office and Factory91, 101 rd, Kyungchungdae-ro, Konjiam-up, Kwangju City, Kyunggi Province, South KoreaTEL +82-31-767-2845 FAX +82-31-767-2847EMAIL [email protected] http://jungwonco.com

Jinkwang E&C CorporationMain Office and Factory705, Buk-ri, Namsa-myun, Churin-gu, Youngin City, Kyunggi Province, South KoreaTEL +82-31-333-3444 FAX +82-31-332-5300 / 5301WEBSITE www.jinkwang.co.kr

Contact Information

24


Prod

uct I

ntro

duct

ion

Asea E&T Main Office and Factory261 Kobul-ro, Kwangju City, Kyunggi Province, South KoreaTEL +82-31-797-7677 FAX +82-31-797-7477EMAIL [email protected] www.aseaent.co.kr

Jungwon Electric Systems Inc. Main Office and Factory91, 101 rd, Kyungchungdae-ro, Konjiam-up, Kwangju City, Kyunggi Province, South KoreaTEL +82-31-767-2845 FAX +82-31-767-2847EMAIL [email protected] http://jungwonco.com

Jinkwang E&C CorporationMain Office and Factory705, Buk-ri, Namsa-myun, Churin-gu, Youngin City, Kyunggi Province, South KoreaTEL +82-31-333-3444 FAX +82-31-332-5300 / 5301WEBSITE www.jinkwang.co.kr

International Electric Co., Ltd. Main Office and Factory98, Shinkyechun-ro, Kumwang-up, Unsaung-kun, Northern Chungcheong Province, South KoreaTEL +82-43-883-7751 FAX +82-43-883-7773Sales Division3F Iksung Building, 6 Bongeunsa-ro 112-gil, Gangnam-ku, Seoul, KoreaTEL +822-465-7751 FAX +822-465-4809EMAIL [email protected] www.ieckr.com

product introduction - microsoft · fuse and fault current limiting fuse, it can prevent damage to...

Documents