product profile · 2020. 6. 13. · ssw05 ssw07 ssw08 g 220 to 575 supply voltage v g output rated...
TRANSCRIPT
-
CRITICAL POWER
LOW POWER SINGLE-PHASE UPS
HIGH POWER THREE-PHASE UPS (SINGLE AND MODULAR VERSIONS)
VOLTAGE STABILIZER
RECTIFIERSAND INVERTERS
NOBREAKGARAGE
MEDICAL IT SYSTEM
BATTERIES
PRODUCT PROFILE AUTOMATION
MT LINEg 4.3 to 15 inch screeng Real time clockg USB portg Ethernet communication g Free edition software
HUMAN MACHINE INTERFACES (HMI) INDUSTRIAL PLUGS AND SOCKETS
WEG Group - Automation Business UnitJaraguá do Sul - SC - Brazil Phone:+55 47 3276 [email protected] Co
d: 5
004
9853
| R
ev: 1
1 | D
ate
(m/y
): 12
/201
9Th
e va
lues
sho
wn
are
sub
ject
to c
hang
e w
ithou
t prio
r no
tice.
CLIC02g Power supply voltage: 12 V dc,
24 V dc or 110-220 V ac (50/60 Hz)
g Basic units 10, 12 or 20 digital inputs and outputs or 4 analog inputs (0-10 V dc / 12 bits)
g Real time clockg Two quick 1 kHz inputsg Two PWM outputs and 1 kHz
pulse traing Free programming software
Clic02 edit V3
TPW04PLC300g Supply voltage of 100/240 V acg Flexible basic units 10, 20, 30, 40
and 60 I/O pointsg I/O expansion capacityg Real time clockg Incorporated Modbus
communicationg Free programming software
TPWPClink
g Power supply voltage: 24 Vdcg 10 digital inputsg 9 digital outputsg 1 isolated input for encoderg 1 analog input 0-10 V dc / 4-20 mAg Up to 2 expansion modules with digital
and analog I/Og Real time clockg Operation interface (HMI)g 5 inbuilt ports: USB, RS232,
RS485, CANopen e Ethernetg Free WPS Programming Software
PLCS - PROGRAMMABLE LOGIC CONTROLLERS
MOTOR STARTING AND PROTECTION
g Resistant to impacts and corrosiong Protection against indirect contact g Rated currents: 16 A, 32 A, 63 A and 125 Ag Number of poles: 3 (2P+T), 4 (3P+T) and
5 (3P+T+N)g Rated voltages: 110 V ac, 220 V ac
e 380 V acg Degree of protection IP44 and IP67g Available in two lines:
g Standardg Premium
CWC - MINIATURE CONTACTORSg Switching operations in utilization
category AC-3 up to 22 Ag Integrated auxiliary contacts up to 16 Ag Low-consumption DC coils, allowing
direct connection to PLCs
RTW, RPW AND RIEW - ELECTRONIC RELAYSg Timers, voltage and level monitors – 17.5 mm wideg Status indicator LEDsg Simple configuration and operation g Settings via external selectorsg Highly reliable contactsg Excellent precision and repeatabilityg Noise immunity
CWMC - CONTACTORS FOR CAPACITOR SWITCHINGg Available for switching capacitor banks of
up to 61 kvar @ 400/415 Vg Directly mounted on DIN rail 35 mm or
tightened with screws
MPW - MOTOR-PROTECTIVE CIRCUIT-BREAKERSg Motor start and protection up
to 40 cv at 220 V and 75 cv at 380/440 V
g Adjustable thermal releases to protect the motor against overloads up to 100 A
g Wide range of accessories
SRW - SMART RELAYS
CWB AND CWM - CONTACTORSg Complete line from 9 to 800 A (AC-3)g Several coil voltages available in AC
and DCg Complete accessory line
DLW - ENCLOSED STARTERS
g USB port g Communication in Modbus-RTU,
Profibus-DP, DeviceNet, EtherNet/IP, PROFINET IO or Modbus-TCP
g Free parameter setting softwareg Fast and precise fault and alarm
diagnosisg Fault record and statistics g Backup of the original configurationg Possibility to measure current, voltage
and earth leakage
g Models up to 840 Ag Manual or automatic resetg Conventional (RW) versions with
trip class 10g Electronic versions (RW_E) with
selectable trip class: 10, 20 and 30g Protection against phase loss and
phase unbalance in the electronic versions (RW_E)
RW AND RW_E - THERMAL AND ELECTRONIC OVERLOAD RELAYS
VARIABLE SPEED DRIVES
CFW700 g 200-600 V single or three-phase supply
voltageg 2.9 to 211 A rated output currentg Maximum applicable motor 1.5 cv
(1.1 kW) to 175 cv (132 kW)
MW500 - MOTOR DRIVEg Three-phase supply voltage:
380-480 Vg Output rated current: 4.3 to 16 Ag NEMA 4x/IP66 protectiong Dockable on the W22 motor
range or wall mountableg Disconnector (optional)g Free WPS Programming Software
CFW501 - HVACg 200-480 V supply voltageg 1 to 31 A rated output current 0.33 to
20 cvg Low input harmonic distortiong SoftPLCg Operator interface (HMI) with specific
units for HVAC applicationsg BACnet, Metasys N2 and Modbus-RTU
communication protocolsg Free WPS Programming Software
CFW11g 200 to 690 V single or three-phase supply
voltageg Output rated current: 2.7 to 2,850 A
(1.5 to 2,500 cv)g Vector control (sensorless or with encoder)
and WMagnet, VVW
CFW701 - HVACg 200-600 V single or three-phase
supply voltageg Output rated current: 3.6 to 211 A g Power range from 2 HP (1.5 kW) to
175 HP (132 kW)g RFI filter according to the levels of
EN 61800-3 (standard)g Inductor on DC linkg BACnet MS/TP, Metasys N2 and
Modbus-RTU communication protocolsg SoftPLC with free WPS programming softwareg Versions with IP20, NEMA1 or IP55 protection rating
g 100-127 or 200-240 V single-phase supply voltage
g Output rated current: 1.6 to 4.2 Ag Maximum applicable motor 0.25 cv to 1 cv
4.2 A (1 cv)g Vector (VVW) or scalar (V/F) control modesg SoftPLCg Free WPS Programming Software
CFW100 CFW500CFW300g 200-600 V single or three-phase
supply voltageg 1 to 56 A rated output current
(0.25 to 75 cv)g SoftPLC with free WPS programming
softwareg STO and SS1 safety functionsg Versions with IP20 NEMA1 or IP66,
protection ratingg PM motor controlg Vector control (sensorless or with encoder) and VVW
g Single-phase or three-phase supply voltage at 100-127 V, 200-240 V or 380-480 V and three-phase motor power supply at 220 V or 380 V. Direct current power supply is also allowed
g Output rated current: 1.6 to 15.2 Ag Easy installationg Flash memory module (accessory)g Free WPS Programming Softwareg Vector (VVW) or scalar (V/F) control modes
g Direct starters in thermoplastic enclosures:g Three-phase: up to 40 HP at 220 V and
75 HP at 380/440 V (IEC)g Single phase: up to 2 HP at 127/220/254 V
(NEMA) and 12.5 HP at 127/220/440 V (IEC)g Enclosures up to 20 HP at 220 V and 40 cv
at 380/440 V (IEC)
SWA - SERVOMOTORSg Torque of 0.8 at 40 N.m g Sinusoidal FCEMg Protection level IP65g Brushlessg Low inertiag Low maintenanceg Rapid dynamic responseg Low noise and vibration levels
SERVO DRIVES AC/DC CONVERTER
SCA06 - SERVO DRIVE CTW900 g Supply voltage of 220...230 V or
380...480 Vg High performanceg Precise movement control g Operation in closed loopsg Position feedback by means of resolverg Control and power with independent
power supplies
g Supply voltage of 200…500 Vg Output rated current: 20 to 2,000 Ag Current control field up to 25 A g Speed or torque controlg USB Portg SoftPLCg Free software: WLP and Superdrive G2
-
CSW
UCW - SINGLE-PHASE CAPACITIVE UNIT
UCWT - THREE-PHASE CAPACITIVE UNIT
MCW - THREE-PHASE CAPACITOR MODULE
g Power of up to 10 kvar in 535 V size (diameter) from 53 to 75 mm
g Capacitive units for mounting three-phase modules and banks
g Powers up to 60 kvar and 480 V
g Single-phase capacitive units delta connected
g Built-in discharge resistors
g Ideal for localized/ individual motor correction:
g 0.5 to 30 kvar @ 220 V g 0.5 to 50 kvar @
380/440/480/535 Vg Built-in discharge resistors
CAPACITORS AND POWER FACTOR CORRECTION
SOFT-STARTERS
SSW05 SSW07
SSW08
g 220 to 575 supply voltage Vg Output rated current: 3 to 85 Ag Built-in bypassg Remote operating interface (HMI)
(optional)
g 220 to 575 supply voltage Vg Output rated current: 17 to 412 Ag Built-in bypassg 3-phase controlg Built-in motor protections
g 220 to 575 supply voltage Vg Output rated current: 17 to 412 Ag Built-in bypassg Control of 2 phasesg Built-in motor protections
SSW06g 220 to 690 supply voltage V g Output rated current: 10 to 1,400 Ag Built-in bypass up to 820 Ag Torque control g SoftPLCg Motor inside delta connection allowedg Multiple accessory options for network communication
SSW900g 220 to 575 V supply voltageg Rated currents: 10 to 670 Ag Detachable graphic IHM with built-in
USB port and Bluetoothg Built-in bypassg Motor inside delta connection allowedg SoftPLC with free WPS programming software
ELECTRICAL CIRCUIT PROTECTION
DWB AND DWA - MOLDED-CASE CIRCUIT-BREAKERSg Rated currents from 16 to
1,600 Ag Short-circuit breaking
capacity of up to 80 kA (380/415 V)
g Models with fixed, adjustable and electronic thermal and magnetic releases
MDW E MDWH - MINIATURE CIRCUIT BREAKERS 3...10 KA 230/400 V ACg Rated currents from 2 to 125 Ag One, Two, Three and Four Polesg Breaking capacity: g 1.5 kA...10 kA (230/400 V ac)
NBR NM 60898 g 3 kA...10 kA (230/400 V ac)
NBR IEC 60947-2
MSW - SWITCH-DISCONNECTORSg Rated currents from 12 up to 160 A g Mounting option: top and baseg Compliance with the requirements
of NR12 and IEC 60947-3 standards
g Compact and easy installationg Complete range of accessoriesg Terminals with IP20 protection
degreeg Handle with IP65 protection
degree
FSW - FUSE-SWITCH-DISCONNECTORSg According to IEC 60947-3
and IEC 60947-1 standardsg Transparent coverg Arc chuteg Auxiliary contact installed on
the switchg Fast fuse replacementg Safe operation
Available in currents of 100 A, 160 A, 250 A, 400 A and 630 A.Application: NH fuses in the sizes 000, 00, 1, 2 and 3.
FNH / FDW - HIGH SPEED FUSES AND TIME-DELAY FUSESg Manufactured according to
IEC 60269 in currents from 2 to 2,000 A
g aR class, NH and flush-end type: protection against short-circuit in semiconductors/electronic equipment up to 690 V ac
g gL/gG, class NH and D types: protection against short-circuit and overloads for general appliances up to 500 V ac
MACHINE SAFETY SOLUTIONS
g Safety light curtainsg Zero effort electronic switchesg Safety relaysg Safety handle for pressesg Bi-manual commandsg Electronic activation module g Magnetic sensors with safety functions g Interlocking switchesg Emergency safety switch activated by cableg Contactors for safety systems
SAFETY LINEg Pushbuttons, selector switches and
pilot lightsg IP66 protection degreeg Quick and easy assembly systemg High reliability auxiliary contactsg Lighting block with integrated LED
COMMAND AND SIGNALING