product specification sheetflash point p.m.c.c. astm d93 c min. 140 water content astm d6304 ppm...

Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 of 20

PRODUCT SPECIFICATION SHEET

Website: www.amoceg.com E-mail: [email protected]

(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183

Alexandria Mineral Oils Company (AMOC)

Chemical Laboratory

Products Specifications Sheet

http://www.amoceg.com/

mailto:[email protected]





Index

S.N. Page No. Product

1 3 of 20 FUEL OIL FOR EXPORT

2 4 of 20 STRAIGHT RUN FUEL OIL

3 5 of 20 TRANSFORMER OIL

4 6 of 20 AUTOMATIC TRANSMISSION FLUID ( ATF IID) AMOC POWER (D-21611)

5 7 of 20 AUTOMATIC TRANSMISSION FLUID (ATFIII-G) & AMOC POWER PLUS (DEXRON III-G34291)

6 8 of 20 PARAFFIN WAX UNHYDROTREATED FULLY REFINED AW (520-540-560-580-600)

7 9 of 20 PARAFFIN WAX HYDROTREATED FULLY REFINED AW (520-540-560-580-600)

8 10 of 20 PARAFFIN WAX UNHYDROTREATED FULLY REFINED AWU (540-600)

9 11 of 20 PARAFFIN WAX HYDROTREATED SEMI REFINED AW SRW 600

10 12 of 20 SLACK WAX

11 13 of 20 LIQUIFIED PETROLEUM GAS

12 14 of 20 NAPHTHA

13 15 of 20 LOW POUR POINT GAS OIL

14 16 of 20 GAS OIL, EGYPTIAN STANDARD NO. 16 (2013)

15 17 of 20 EGYPTIAN STANDARD SPECIFICATION FOR FUEL OIL (17 - 2007)

16 18 of 20 BASE OIL SN (150)

17 19 of 20 BASE OIL SN (400/500)

18 20 of 20 BASE OIL SN (600/700)







Product Description:

1 - FUEL OIL FOR EXPORT

Product Characteristics:

Test Method Unit Specification

Density @15°C ASTM D4052 g/ml As agreed with customer

Sulphur ,Total ASTM D2622 % mass As agreed with customer

Flash Point P.M.C.C. ASTM D93 °C As agreed with customer

Pour Point ASTM D97 °C As agreed with customer

Kin. Viscosity @100°C ASTM D445 mm2/s(cSt) As agreed with customer

Conradson Carbon ASTM D189 %mass As agreed with customer

Water Content ASTM D95 %(V/m) As agreed with customer

Heat of combustion ASTM D4868 As agreed with customer

Gross Heat of combustion ASTM D4868 BTU/Ib As agreed with customer

Net Heat of combustion ASTM D4868 BTU/Ib As agreed with customer

Sodium ASTM D5863 ppm As agreed with customer

Nickel ASTM D5863 ppm As agreed with customer

Vanadium ASTM D5863 ppm As agreed with customer








2 - STRAIGHT RUN FUEL OIL



Relative Density @ 60/60 °F

ASTM D1298 - 0.92

Redwood Viscosity 1 @100 °F

IP-70 Sec 850 Approx.

Sulphur ,Total ASTM D4294 % mass Max. 1.00

Water and Sediment ASTM D2709 % Vol Max. 0.10

Carbon Residue ASTM D4530 % mass Max. 8.0

Pour Point ASTM D97 °C 42








3 - TRANSFORMER OIL (UNINHEBITED)



Density @ 15 °C ASTM D4052 g/ml Reported

Kin. viscosity @ 40 °C ASTM D445 mm2/s(cSt) Max. 12.0

Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) Reported

Viscosity Index ASTM D2270 - Reported

Pour Point ASTM D97 °C Reported

Flash Point P.M.C.C. ASTM D93 °C Min. 140

Water Content ASTM D6304 ppm Max. 30

Corrosive Sulphur ASTM D1275 / ISO 5662 Rating Non corrosive

Acid Number ASTM D664 mg KOH/g Max. 0.01

Electric Strength (after treatment)

IEC 156 / BS 5874 KV Min. 50

Appearance Visual Clear & Bright

Crude Origin: Egyptian

Refining Process: Solvent refining, solvent dewaxing & hydro-finishing








4 - AUTOMATIC TRANSMISSION FLUID (ATF IID) AMOC POWER (D-21611)





Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) 6.0 - 8.0

Viscosity Index ASTM D2270 Min. 150

Flash Point C. O. C. ASTM D92 °C Min. 170

Pour Point ASTM D97 °C Max - 39

Colour ASTM ASTM D1500 6 - 8

Acid Number ASTM D664 mg KOH/g Reported

Water Content ASTM D95 %(V/m) Nil

Copper Strip Corrosion (3 hrs @ 150 °C)

ASTM D130 1 b

Brookfield Viscosity @-40 °C

ASTM D2983 c.P. Max. 50000

Foaming Characteristics Sequence I Sequence II Sequence III

ASTM D892 m/s Max. 100/0 Max. 100/0 Max. 100/0

Appearance Visual Red & bright

Approvals & Quality Levels: AMOC Power is approved by ZF TE-ML14A&TE-ML11A &TE-ML04-D and Voith H55.6335.xx for DIWA Transmission.

It also meets the requirements of General Motors, Allison C3, MAN 339-D and DC-236.7.

Miscibility & Compatibility: AMOC Power is completely miscible and compatible with all other already marketed ATF Dexron IID types.

Application: AMOC Power is suitable for all transmission American, European and Japanese power steering boxes and other applications where ATF Dexron IID is recommended. Refining process: Solvent refining, solvent dewaxing & hydro-finishing

*Recommended Drain Interval: 30,000 KM under normal operating conditions.








5 - AUTOMATIC TRANSMISSION FLUID (ATF IIIG) AMOC POWER PLUS (Dexron III-G34291)





Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) 6.8 - 8.4

Viscosity Index ASTM D2270 MIN 160

Brookfield Viscosity @ -40 °C ASTM D-2983 C.P. Max 20000

Flash Point C. O. C. ASTM D92 °C MIN 170

Pour Point ASTM D97 °C Max -42

Colour ASTM ASTM D1500 6 - 8

Acid Number ASTM D664 Mg KOH/g Reported

Water Content ASTM D95 %(V/m) Nil

Copper Strip Corrosion (3 hrs @ 150oC)

ASTM D130 rating max 1b

Foaming Characteristics Sequence I Sequence II Sequence III

ASTM D892 m/s Max. 100/0 Max. 100/0 Max. 100/0

Appearance Visual Red & bright

Approvals & Quality Levels: AMOC Power Plus is approved by ZF TE-ML14A&TE-ML04D and Voith H55.6335.xx for DIWA Transmission.

It also meets the requirements of General Motors G-34291, Allison C4 29521 04, Ford Mercon M030701, MAN 339-

V1and Z1.

AMOC Power Plus IIIG passes all GM performance tests (Oxidation, Cycling, Plate Clutch Friction, Band Clutch tests).

Miscibility & Compatibility: Completely miscible with other approved ATF Dexron III products. Compatible with all types of Rubber and Seals.

Application: AMOC Power is suitable for all transmission American, European, and Japanese power steering boxes and other applications where ATF Dexron III is recommended. Product Origin: Egypt.








6 - PARAFFIN WAX UNHYDROTREATED FULLY REFINED AW (520-540-560-580-600):


Test Method Unit AW 520 AW 540 AW 560 AW 580 AW 600

Density @ 15 ° C ASTM D4052

g/ml Reported Reported Reported Reported Reported

Kin.viscosity@100°C ASTM D445

mm2/s(cSt) Reported Reported Reported Reported Reported

Flash Point C.O.C ASTM D92

°C Reported Reported Reported Reported Reported

Congealing point ASTM D938

°C 52 / 54 54 / 56 56 / 58 58 / 60 60 / 66

Penetration @ 25°C ASTM D1321

mm/10 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20

Oil Content ASTM D721

% Wt Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5

Solvent Content ASTM D4626

ppm Max. 400 Max. 400 Max. 400 Max. 400 Max. 400








7 - PARAFFIN WAX HYDROTREATED FULLY REFINED AW (520-540-560-580-600):


Test Method Unit AW 520 AW 540 AW 560 AW 580 AW 600

Density @ 15 ° C ASTM D4052

g/ml Reported Reported Reported Reported Reported

Kin.viscosity@100°C ASTM D445

mm2/s(cSt) Reported Reported Reported Reported Reported

Flash Point C.O.C ASTM D92

°C Reported Reported Reported Reported Reported

Saybolt Colour ASTM D6045

- Min. +26 Min. +26 Min. +26 Min. +26 Min. +26

Congealing point ASTM D938

°C 52 / 54 54 / 56 56 / 58 58 / 60 60 / 66

Penetration @ 25°C ASTM D1321

mm/10 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20

Oil Content ASTM D721

% Wt Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5

Solvent Content ASTM D4626

ppm Max. 10 Max. 10 Max. 10 Max. 10 Max. 10








8 - PARAFFIN WAX UNHYDROTREATED FULLY REFINED AWU (540-600):


Test Method Unit AW 540 AW 600

Density @ 15 ° C ASTM D4052 g/ml Reported Reported

Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Reported Reported

Flash Point C.O.C ASTM D92 °C Reported Reported

Congealing point ASTM D938 °C 54 / 58 60 / 66

Penetration @ 25°C ASTM D1321 mm/10 Max. 20 Max. 20

Oil Content ASTM D721 % Wt Max. 0.5 Max. 0.5

Solvent Content ASTM D4626 ppm Max. 400 Max. 400








9 - PARAFFIN WAX HYDROTREATED SEMI REFINED AW SRW 600:



Density @ 15 ° C ASTM D4052 g/ml Reported

Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Reported

Flash Point C.O.C ASTM D92 °C Reported

Saybolt Colour ASTM D6045 - Min. +25

Congealing point ASTM D938 °C 60 / 66

Penetration @ 25°C ASTM D1321 mm/10 22 - 28

Oil Content ASTM D721 % Wt Max. 1.5








10 – SLACK WAX:



Density @ 15 ° C ASTM D4052 g/ml Reported

Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Max. 8.0

Flash Point C.O.C ASTM D92 °C Min. 200

ASTM Colour ASTM D1500 - Max. 2

Oil Content ASTM D721 % Wt Max. 18

Congealing point ASTM D938 °C Min. 40








11 – LIQUIFIED PETROLEUM GAS (LPG):



Density @ 15 °C ASTM D1657 kg/cm3 Reported

Reid Vapor Pressure @50 °C ASTM D1267 kg/cm2 MAX.10 (SUMMER) MAX.11.5 (SPRING&AUTUMN) MAX.12.8 (WINTER)

Volatility, 95% vol evaporated

ASTM D1837 °C MAX.17°C(SUMMER) MAX.8°C(SPRING&AUTUMN) MAX.4°C(WINTER)

Hydrogen Sulphide ASTM D2420 %wt Nil

Mercaptan Sulphur IP 272 %wt 0.003-0.008

SUMMER: MAY, JUNE, JULY, AUGUST, SEPTEMBER

SPRING: MARCH, APRIL

AUTUMN: OCTOBER, NOVEMBER

WINTER: DECEMBER, JANUARY, FEBRUARY








12 - NAPHTHA



DENSITY@15 °C ASTM D4052 g/ml 0.680

COLOUR ASTM D6045 Saybolt Min. +25

R.V.P @ 100 OF ASTM D323 Kg/cm2 Max. 0.80

TOTAL SULPHUR ASTM D4294 % Wt Max. 0.03

GUM CONTENT ASTM D381 mg/100ml Max. 1

LEAD CONTENT ASTM D3237 / IP 224 ppb Max. 7

OCTANE NO ASTM D2699 RON Min. 55

DISTILLATION

I. B. P

ASTM D86 °C

35 - 40

10% DISTILLED @ Max. 55



F.B.P. Max. 180

PONA ANALYSIS

OLEFINS

ASTM D6730 % VOL

Max. 1

NAPHTHENES Min. 5

AROMATICS 1 - 4

PARAFFINS Balance








13 – LOW POUR POINT GAS OIL:



DENSITY@15 °C ASTM D4052 g/ml Reported

COLOUR ASTM D1500 - Max. 4.0

SULPHUR, TOTAL ASTM D4294 % Wt Max. 0.15

FLASH POINT ASTM D93 °C Min. 55

POUR POINT

DEC, JAN, FEB, MAR

ASTM D97 °C

Max. 3

APR, MAY, OCT, NOV Max. 9

JUN, JUL, AUG, SEP Max. 15

VISCOSITY R-1 @ 100 °F IP 70 Sec. Max 50

WATER AND SEDIMENT ASTM D2709 % Vol Max. 0.10

DISTILLED @ 350 °C ASTM D86 % Vol Min. 50








14 – GAS OIL, EGYPTIAN STANDARD No. 16 (2013) :



Relative Density @ 60/60 °F D-1298 - Reported

Flash Point P.M.C.C. D-93 °C Min. 55

Kin. vis. @ 40 °C D-445 mm2/s(cSt) 1.60-7.00

Redwood Viscosity 1 @ 40 °C IP-70 Sec 30-43

Colour ASTM D-1500 - Max. 4

Sulphur ,Total D-4294 % mass Max. 1.00

POUR POINT

DEC, JAN, FEB, MAR

ASTM D97 °C

Max. 3

APR, MAY, OCT, NOV Max. 9

JUN, JUL, AUG, SEP Max. 15

WATER AND SEDIMENT ASTM D2709 % Vol Max. 0.10

WATER AND SEDIMENT ASTM D2709 % Wt Max. 0.10

DISTILLED @ 350 °C ASTM D86 % Vol Min. 85

Carbon Residue D-4530 % mass Max. 0.10

Ash Content D-482 % mass Max. 0.01

Corrosion Copper Strip (3 hrs @ 100 °C)

D-130 rating Max. 1

Inorganic Acidity and Bases IP-182 mg KOH/g NIL

Heat of combustion D-4868 MJ/Kg 44.3








15 - FUEL OIL, EGYPTIAN STANDARD No. 17 (2007)



Relative Density @ 60/60°F ASTM D1298 - Max. 0.995

Kin. Viscosity @50°C ( Winter) (Summer)

ASTM D445 mm2/s(cSt) 200.0 * 250.0**

Flash Point P.M.C.C. ASTM D93 °C Min. 65

Viscosity R-1 @100°F ( Winter) ( Summer)

IP 70 Sec 1700*

2200**

Water & Sediment ASTM D4007 %Vol Max. 1.0

Heat of combustion ASTM D4868

Gross Heat of combustion MJ/Kg Min.42

Net Heat of combustion Kcal. /Kg Min. 10000

* Winter: from 1st of November to end of March

** Summer: from 1st of April to end of October

Note: Upper Egypt Region:

Winter from 16th November to 14th March.

Summer from 15th March to 15th November.








16 – BASE OIL SN (150)



Density @ 15 °C D-4052 g/ml Reported

Kin. vis. @ 100 °C D-445 mm2/s(cSt) 4.5 - 5.5

Kin. vis. @ 40 °C D-445 mm2/s(cSt) Reported

Viscosity Index D-2270 Min. 95

Flash Point C. O. C. D-92 °C Min. 200

Pour Point D-97 °C Max. -6

Colour ASTM D-1500 Max. 1.0

Acid Number D-664 mg KOH/g Max. 0.05

Conradson Carbon D-189 %mass Max. 0.05


Sulphur D-4294 % mass Max. 0.2

Aromatics % D-3238 Max. 10

Water Content D-6304 ppm Max. 100

Copper Corrosion (3h@100°C)

D-130 rating Max. 1

Appearance Visual Clear & bright










17 – BASE OIL SN (400/500)




Kin. vis. @ 100 °C D-445 mm2/s(cSt) 9.3 - 10.0



Flash Point C. O. C. D-92 °C Min. 220

Pour Point D-97 °C Max. -3

Colour ASTM D-1500 Max. 2.0

Acid Number D-664 mg KOH/g Max. 0.05

Conradson Carbon D-189 %mass Max. 0.05


Sulphur D-4294 % mass Max. 0.3




D-130 rating Max. 1











18 – BASE OIL SN (600/700)





Kin. vis. @ 40 °C D-445 mm2/s(cSt) 100 - 130


Flash Point C. O. C. D-92 °C Min 230

Pour Point D-97 °C Max -3

Colour ASTM D-1500 Max 2.0

Acid Number D-664 mg KOH/g Max 0.05

Conradson Carbon D-189 %mass Max 0.05

Ash Content D-482 % mass Max 0.05

Sulphur D-4294 % mass Max 0.3




D-130 rating Max. 1






product specification sheetflash point p.m.c.c. astm d93 c min. 140 water content astm d6304 ppm...

Documents