product specificationproduct specification .no. 01745956 nissan navara np300 (spain built) - arb
Post on 01-Nov-2018
Embed Size (px)
Product development of the ARB Classic canopy to suit the new Nissan Navara NP300 Euro-Spec 2015+ dual cab pick-up utilities has been finalised.
Complementing the design flow of the vehicle and the high sided tub, the ARB cano-py design is available as a standard height roof version in either Smooth or Textured exterior finish. Customers may choose from our side sliding window, lift up window or no side window configuration. Where side windows are optioned, they are posi-tioned low on the canopy shell to maximise the access into the back of the vehicle.
The canopy shell accommodates the protrusion of the vehicles 3rd safety lamp located on the top rear edge of the cabin. Due to the NP300 being slightly narrower in the vehicle cabin design, the front canopy window is offered only in sliding configuration to avoid interference with internal frames where fitted. The window has been designed to offer clear and unobstructed rear vision with the provision to easily clean the vehicle cabin rear glass.
Nissan Navara NP300 (Spain built) - ARB Classic Canopy 1 - 5
Date: May 2016
Description: ARB Classic Canopy
Application: Nissan Navara NP300 Dual Cab (Spain Built)
Part No. & Barcode : See Table Page 3
Product Group: 125 - ARB HD Smooth
Canopies135 - ARB Canopies
Availability Date: June 2016
Company Ident. No. 01745956
With the introduction of Nissans unique tailgate spoiler, ARB have designed a curved glass door manufactured from grey tinted and tempered safety glass to EC43R standards
To help prevent water and dust entry, an additional bracket with foam seal is fitted to both sides of the bed rail against the tail-gate.
Nissan Navara NP300 (Spain built) - ARB Classic Canopy 2 - 5
With the introduction of Nissans unique tailgate spoiler, ARB have designed a curved glass door manufactured from grey tinted and tempered safety glass to EC43R standards, which not only complements the spoiler with its contoured edging, it also includes the addition of a aluminium extrusion which mounts directly to the tailgate spoiler to assist with minimising water and dust ingress. Each rear door is fitted with a high mount LED stop lamp, a forward facing interior light and specially selected gas assist struts with low opening force (160N) suitable for a climate range of -30C to 80C.
ARBs unique laser cut steel mount system is bolted directly into fixed fasteners located at the front and rear of the vehicle tub which also integrate with ute liners (where fitted) with minimal modifications.
ARB canopy shells are made from a special co-extruded ABS plastic for strength and durability. The ABS is inert and with suitable venting is safe for the transportation of animals. As a recyclable material we have the opportunity to reduce the amount of landfill at end of product life. The heavy duty painted smooth canopy blends with the smooth surface of the vehicle whilst the economical alternative is the white textured surface canopy with UV capping where painting is optional. Shell surface configurations are captured in our unique part numbers - Refer to Canopy part number table below
For trade and lifestyle customers, we are thrilled to offer our standard side windows with the large 278mm opening to access the cargo area for a vast array of tools or camping equipment. Window combinations are captured in our unique part numbers - Refer to Canopy part number table below.
Company Ident. No. 01745956
Part # Shell style Window Combination
CPS62A Smooth Canopy 2 sliding side windowsCPS62B Smooth Canopy LH lift up, RH slidingCPS62C Smooth Canopy 2 lift up windows
CPS62D Smooth Canopy RH sliding, LH lift upCPS62E Smooth Canopy No side windows
CPS62CA Smooth Canopy 2 aluminium lift up windowsCP62A Textured Canopy 2 sliding side windowsCP62B Textured Canopy LH lift up, RH slidingCP62C Textured Canopy 2 lift up windowsCP62D Textured Canopy RH sliding, LH lift upCP62E Textured Canopy No side windows
CP62CA Textured Canopy 2 aluminium lift up windows
1Canopy is painted to vehicle manufacturer colour code. Specify at time of or-der
Installation For those familiar with ARB canopies, the Nissan Navara NP300 canopy is fit-ted in the same traditional way along with the inclusion of the tailgate spoiler door stop extrusion and corner tailgate seal assemblies.
Fitment time allocation is 2.5 hours1. Fitting instructions are available via our trade resources website PN 3789364.
1Additional installation time required if sport bars and ute liners are fitted
Canopy AvailabilityOur components will be in stock in June 2016 to enable canopies to be made to ORDER order.
N.B. Due to the style of this vehicle, overall vehicle aesthetics and fitment of roof rack accessories, a high roof canopy has been excluded from the range.
Nissan Navara NP300 (Spain built) - ARB Classic Canopy 3 - 5 Company Ident. No. 01745956
A new internal frame kit has been made specifically to suit the Nissan Navara NP300 Dual Cab canopy. The ARB internal frame kit is rated to carry up to 100kg load evenly spread over the roof bar system (e.g. the roof cage and its contents must not exceed this rating).To accommodate for the OE fitted cabin roof rails found on ST-X models, specific roof rack mounts have been designed to suit. In addition, specific roof racks must be used when being fitted to these ST-X models.
Accessory Description ARB Part Number Standard or OptionCanopy Vent Slimline 4700010 Option
Internal frame set for roof bars/rack 2 3 4138040 Option
Roof rack bracket kit (not ST-X) 4138004 Option
Roof rack mounts ST-X 4 4138014 Option
Canopy roof rack 1850 x 1250 2 ALLOY 4900140M Option
Canopy roof rack 1850 x 1250 2 STEEL 4000020 Option
Canopy roof rack 1850 x 1120 2 ALLOY 4900130M Option
Canopy roof rack 1850 x 1120 2 STEEL 4000010 Option
Canopy roof rack (ST-X) 1850x12502 STEEL 4000050 Option
Canopy roof rack (ST-X) 1850x12502 ALLOY 4000050M Option
Roller for Steel Canopy roof rack 3700300 Option
Roof Bar Mount kit 3 4100320 Option
Fly Screen (suit sliding windows) 6600021L/R Option
Screen - side window slider full width 6600035 Option
Screen - side window slider open section only 6600034 Option
Screen - front window lift up 6600037 Option
2 Components indicated with this reference are required to complete a full canopy roof rack installation.3 Components indicated with this reference are required to complete a full roof bar installation. Roof bars will NOT align with roof bars fitted to OE roof rails.4 Roof rack mount kit compatible with OE vehicle cabin roof rails
Caution: The canopy is NOT rated to carry loads directly on the roof top without an approved rack system. The rear door is recommended to remain in the closed position during transit.
Nissan Navara NP300 (Spain built) - ARB Classic Canopy 4 - 5 Company Ident. No. 01745956
TECHNICAL SPECIFICATIONS:Fitting instructions and spare parts lists are available on www.sellarb.com.au.
Canopy Part Number
Roof A (mm)
C/P/62x Std 1570 1585 390 540
Stated dimensions are external canopy measurements in mm. Acceptable manufacturing variation to these nominal dimensions may occur. Dimension C is the internal measurement. With the door in the OPEN position the height from the bed rail is 420mm.
A B C
Nissan Navara NP300 (Spain built) - ARB Classic Canopy 5 - 5
ARB Europe s.r.o
T +420 323 040 900 F +420 323 910 W arbeurope.com
Na Dlouhem c. 80, DC2, 251 01 Ricany - Jazlovice Czech Republic
Company Ident. No. 01745956