products for the railway industry - brammer - · pdf fileproducts for the railway industry....
TRANSCRIPT
![Page 1: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/1.jpg)
Products for the
Railway Industry
![Page 2: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/2.jpg)
Page 1
Adhesion
Seam sealing of metal sheet overlap joints
Sealing of metal sheet overlap joints and
seams both inside and outside (e.g. door
frames, ventilation holes) as a protection
against edge corrosion. Sealing of gaps
to prevent the penetration of moisture
(corrosion!) and eliminate sharp-edged
transitions. Sealing of the unwelded
sections arising on account of the
employed welding method (stepwise-
performed welding).
Characteristics Terostat-MS 935 Terostat-MS 939 Terostat-90 Terostat-92
Chemical Basis MS-polymer MS-polymer polyurethane polyurethane
Skin formation time (min) 10 - 20 10 - 15 30 - 50 35 - 45
Curing rate (mm/day) 3 3 4 4
Shore-A-hardness 50 60 30 - 40 35
Ability to overpaint yes yes yes yes
UV-resistant yes yes conditional no
Temperature resistant °C -40/+100 -40/+100 -40/+80 -40/+70
Ageing resistance very good very good very good very good
P R O D U C T
Substrates Terostat-MS 935 Terostat-MS 939 Terostat-90 Terostat-92
Steel sheet + + Pr.102 Pr.102
Steel sheet, galvanised + + Pr.102 Pr.102
Steel sheet, painted/primer-coated V V V V V V V V
Stainless steel + + Pr.102 Pr.102
Aluminium, raw + + Pr.102 Pr.102
Aluminium, anodised + + + +
Aluminium, painted/primer-coated V V V V V V V V
P R O D U C T
+ = Adhesion without primer; Pr. = primer; V V = preliminary tests required.
![Page 3: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/3.jpg)
Product description
Page 1/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Terostat-MS 935
Terostat-MS 935 is an elastic, one-component sealant/adhesive based on silane-modified polymer. It displays universaladhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be painted over, curesquickly and has a very low volume shrinkage (100% solid). After having cured completely, Terostat-MS 935 displayshigh abrasion resistance. It is free of solvents, PVC, isocyanates and silicone and is odourless.
Terostat-MS 939
Terostat-MS 939 is an elastic, one-component adhesive/sealant based on silane-modified polymer. It displays universaladhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be painted over, curesquickly and has a very low volume shrinkage (100% solid). Terostat-MS 939 is free of solvents, PVC, isocyanates andsilicone and is odourless.
Terostat-90
Terostat-90 is an pasty, one-component polyurethan-based sealant/adhesive with good adhesion to metals andplastics. It can be painted over wet in wet and can be grinded. Terostat-90 cures quickly, shows conditional resistanceto UV rays and ageing.
Terostat-92
Terostat-92 is an elastic, one-component polyurethan-based sealant/adhesive with good adhesion to metals andplastics. It can be painted over wet in wet, can be applied by means of a spatula and can be grinded. Once curedcompletely, Terostat-92 displays high abrasion resistance. For outside use it must be painted over.
Test certificates
Terostat-MS 935 ■ Sensory test in accordance with DIN 10955Test institute: SKZ, Würzburg
■ Mould fungus resistance in accordance with ISO 849Test institute: BAM, Berlin
■ Low-temperature shock resistance (cold proof) Test institute: AEG Railway vehicles, ZfU
■ Certificate of Type Approval according to IMO A 653 (16)Bureau Veritas, Marine Division, France
Product range
Terostat-MS 935 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 310 ml colours: black■ Wallet 570 ml colours: white, grey, black
Terostat-MS 939 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey, black
Terostat-90 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey
Terostat-92 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey, black
The sealant to be used for specific applications depends on the specific requirements to be met (e.g. UV resistance, ability to overpaint).
![Page 4: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/4.jpg)
Page 2
Sealing of metal sheet overlap joints if mechanical fastening (spot welding,riveting, screwing) is additionally employed
Sealing of metal sheet overlap joints
both inside and outside (e.g. metal
cladding sheets, trapezoidal floor metal
sheets/cappings) against moisture
and/ or as a protection against electro-
chemical corrosion (contact corrosion)
in the event of bonding differing metals.
Reducing structure-borne sound trans-
mission by means of plastic decoupling.
Characteristics Terostat-81 Terostat-7390 Terostat-VII
Chemical Basis butyl hot butyl PIB
Colour black anthracite light grey
Consistency plasto-elastic soft-plastic plastic
Ageing resistance very good good good
Temperature resistant °C -40/+80 -40/+80 -40/+80
Adhesive force strong strong medium
Additional characteristics can be conditionally can be subjected subjected to spot welding to spot welding
Packaging profiled strip hot sprayable profiled strip,round profile
P R O D U C T
Adhesion
Excellent adhesion without adhesion promoter (primer) to all dry and dust-free metallic substrates.
![Page 5: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/5.jpg)
Page 2/05.01
Product description
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Sealants based on butyl/BIP are characterised by excellent material compatibility, very good adhesion andpermanently plastic consistency. They are free of solvents or other contaminants, odourless and providereliable protection against corrosion.
Terostat-81
Terostat-81 is a profiled, black, extremely tacky butyl sealant with firm plastic consistency. Suitably prepared, Terostat-81 can be subjected to spot welding.
Terostat-7390
Terostat-7390 is an anthracite-coloured, sprayable, extremely tacky butyl sealant which is applied hot (approx. 100 °C)and adheres even to slightly oily sheet metal. It can be subjected to spot welding; since it is easily displaced, it can bealso used as a welding paste.
Terostat-VII
Terostat-VII is a profiled, light grey-coloured medium-tacky PIB sealant of plastic consistency.
Product range
Terostat-81 Flat Profile: ■ 15 x 1.5 mm 10 x 2 mm■ 20 x 1.5 mm 15 x 2 mm■ 25 x 1.5 mm 20 x 2 mm■ 40 x 1.5 mm 30 x 2 mm
Terostat-7390 ■ Cartridge 310 ml
Terostat-VII Round profile: ■ 4 mm, 5 mm, 6 mm, 8 mmFlat Profile: ■ 10 x 2 mm
■ 15 x 2 mm■ 20 x 2 mm■ 30 x 2 mm
![Page 6: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/6.jpg)
Page 3
Sealing/bonding of different materials to one another
Sealing and/or bonding of different
materials (plastic/metal, metal/floor
covering, steel/aluminium) both inside
and outside, such as sandwich elements,
butt joints and overlap joints. Applied to
prevent penetration of moisture and as
a protection against contact corrosion.
Reducing structure-borne sound trans-
mission by means of elastic decoupling.
Adhesion
Characteristics Terostat-MS 937 Terostat-MS 939 Terostat-92 Terostat-8590
Chemical Basis MS-polymer MS-polymer polyurethane polyurethane
Consistency pasty, thixotropic pasty pasty pasty, sag resistant
Skin formation time (min) 10 - 20 10 - 15 35 - 45 approx. 25
Curing rate (mm/day) 4 - 5 3 4 4 - 5
Shore-A-hardness 50 60 35 approx. 50
Ability to overpaint yes yes yes yes
UV-resistant yes yes no conditional
Temperature resistant °C -40/+100 -40/+100 -40/+70 -40/+90
Ageing resistance very good very good very good very good
P R O D U C T
Substrates Terostat-MS 937 Terostat-MS 939 Terostat-92 Terostat-8590
Steel sheet + + Pr.102 Pr.8511
Steel sheet, painted/primer-coated V V V V V V V V
Stainless steel + + Pr.102 Pr.8511
Aluminium, raw + + Pr.102 Pr.8511
Aluminium, anodised + + + Pr.8511
Aluminium, painted/primer-coated V V V V V V V V
Derived timber products + + + +
P R O D U C T
+ = Adhesion without primer; Pr. = Primer; V V = preliminary tests required.
![Page 7: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/7.jpg)
Page 3/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terostat-MS 937
Terostat-MS 937 is an elastic, one-component sealant/adhesive based on silane-modified polymer. It displaysuniversal adhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be paintedover, cures quickly and has a very low volume shrinkage (100% solid). Terostat-MS 937 is free of solvents, PVC,isocyanates and silicone and is odourless.
Terostat-MS 939
Terostat-MS 939 is an elastic, one-component adhesive/sealant based on silane-modified polymer. It displaysuniversal adhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be paintedover, cures quickly and has a very low volume shrinkage (100% solid). Terostat-MS 939 is free of solvents, PVC,isocyanates and silicone and is odourless.
Terostat-92
Terostat-92 is an elastic, one-component polyurethane-based sealant/adhesive with good adhesion to metals andplastics. It can be painted over wet in wet, can be applied by means of a spatula and can be grinded. Once curedcompletely, Terostat-92 displays high abrasion resistance. For outside use it must be painted over.
Terostat-8590
Terostat-8590 is a black, highly viscous, sag resistant, one-component polyurethane-based adhesive/sealant with hightensile strength (even aged). It cures quickly. Depending on its area of application, it is available in different types.
Product range
Terostat-MS 937 ■ Cartridge 310 ml colours: white, grey, black
Terostat-MS 939 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours white, grey, black
Terostat-92 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours white, grey, black
Terostat-8590 ■ Cartridge 310 ml■ Wallet 600 ml
The sealant to be used for specific applications depends on the specific requirements to be met(e.g. UV resistance, ability to overpaint).
![Page 8: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/8.jpg)
Page 4
Sealing of breakthroughs/ducts
Sealing of internal breakthroughs/
ducts (e.g. cable breakthroughs/
pipe ducts) to stop the penetration
of moisture and dirt.
Characteristics Terostat-II Terostat-VII Terostat-IX
Chemical Basis PIB PIB PIB
Colour grey light grey light grey
Consistency plastic plastic plastic
Temperature resistant °C -25/+80 -40/+80 -40/+80
Ageing resistance good good good
Adhesive force low medium medium
Packaging flat profile flat profile kneading masssprayable round profile
P R O D U C T
![Page 9: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/9.jpg)
Page 4/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terostat-II
Terostat-II is a solvent-free, odourless, permanently plastic PIB-based sealant which displays low adhesive force andvery good resistance to water and ageing.
Terostat-VII
Terostat-VII is a solvent-free, odourless, permanently plastic PIB-based sealant which displays medium adhesive forceand very good resistance to water and ageing.
Terostat-IX
Terostat-IX is a solvent-free, odourless, permanently plastic PIB-based sealant which displays medium adhesive forceand very good resistance to water and ageing. The product is applied as a kneading mass.
Product range
Terostat-II ■ DK 310 ml, sprayable Flat Profile: ■ 20 x 2 mm
■ 25 x 2 mm■ 40 x 2 mm
Terostat-VII Round profile: ■ 4 mm, 5 mm, 6 mm, 8 mmFlat Profile: ■ 10 x 2 mm
■ 15 x 2 mm■ 20 x 2 mm■ 30 x 2 mm
Terostat-IX ■ Tin 1 kg■ Pail 16 kg
Sealants based on butyl/PIB are characterised by excellent material compatibility, very good adhesion andpermanently plastic consistency. They are free of solvents or other contaminants, odourless and providereliable protection against corrosion.
![Page 10: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/10.jpg)
Page 5
Bonding of floor plates onto the carcass
Bonding of floor plates (e.g. wood
plates/sandwich plates) to
longitudinal and transverse beams
and to supporting elements.
Characteristics Terokal-8597 Terostat-MS 939
Chemical Basis polyurethane MS-polymer
Consistency pasty, sag resistant pasty
Density (g/cm3) approx. 1.2 approx. 1.5
Skin formation time (min) 25 10 - 15
Shore-A-hardness 55 60
Curing rate (mm/day) 4 - 5 3
Ageing resistance very good very good
Temperature resistant (°C) -40/+90 -40/+100
P R O D U K T
Adhesion
Very good adhesion to wood, derived timber products and painted or primer-coated metals.
![Page 11: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/11.jpg)
Page 5/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terostat-8597
Terostat-8597 is a black, highly viscous, extremely sag resistant, one-component polyurethane-based adhesive/sealant with high tensile shear strength (even aged). It cures quickly by reaction with moisture to a soft elastic product.
Terostat-MS 939
Terostat-MS 939 is an elastic, one-component adhesive/sealant based on silane-modified polymer. It displays universaladhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be painted over, curesquickly and has a very low volume shrinkage (100% solid). Terostat-MS 939 is free of solvents, PVC, isocyanates andsilicone and is odourless.
Product range
Terostat-8597 ■ Cartridge 310 ml
Terostat-MS 939 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey, black
![Page 12: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/12.jpg)
Page 6
Bonding of floor coverings
Bonding of floor coverings based on
PVC or rubber (e.g. Norament) onto
wood or metal substrates. Also used
for bonding needled felt coverings.
Adhesion
Macroplast UK 8222: Very good adhesion to wood, derived timber products, steel and aluminium (primer-coated or painted).
Terokal-60/2: Very good adhesion to wood, derived timber products, metals and rubber.
Terokal-2441: Very good adhesion to wood, derived timber products, steel and aluminium (primer-coated or painted).
Macroplast UK 8222Characteristics Terokal-2441 (Terokal-722) Terokal-60/2
Chemical Basis 2-component epoxy resin 2-component PUR polychloroprene (CR)
Consistency viscous/levelling free-flowing/ thixotropic free-flowing
Density (g/cm3) approx. 1.1 approx. 1.5 approx. 1.0
Pot life (min) 180 - 240 approx. 45 -
Temperature resistant (°C) -40/+100 -30/+100 -20/+80
Nonskid after approx. 16 hours approx. 3 hours immediately
Walkable after approx. 72 hours approx. 8 hours approx. 1 hour
P R O D U C T
![Page 13: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/13.jpg)
Page 6/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terokal-2441
Terokal-2441 is a solvent-free, high-quality, two-component adhesive based on epoxy resin. The product may be usedfor most different bonding and sealing jobs. A particular advantage of Terokal-2441 is the variable mixing ratio from 3:1to 2:3. Thus the cured film becomes softer or harder.
Macroplast UK 8222 (Terokal-722)
Macroplast UK 8222 is a solvent-free, two-component polyurethane adhesive for horizontal and inclined adhesivebonding applications. It is applied using spatulas and characterised by low initial and high final strength. It is free-flowingand has a levelling effect. Indentations in the substrate are levelled-out. The thickness of the layer applied is between 1and 2 mm.
Terokal-60/2
Terokal 60/2 is a solvent-containing, one-component polychloroprene (CR)-adhesive with a good initial and a mediumfinal strength. The adhesive is applied unilaterally (in case of sucking substrates) or bilaterally (contact method).
Test certificates
Macroplast UK 8222 ■ Fire behaviour in accordance with DIN 4102 - B1Test certificate Z PA-III 2.796Test institute: FMPA, Stuttgart (external supervision)
Product range
Terokal-2441 ■ Pail 6 kg (component A)■ Pail 2 kg (component B)
Macroplast UK 8222 ■ Pail 5 kg (component A)■ Tin 1 kg (component B)
Terokal-60/2 ■ Pail 10.5 kg
![Page 14: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/14.jpg)
Page 7
Bonding of the floor (wood/metal)
Bonding of different materials
(wood/steel, wood/aluminium) of
the floor structure, such as nonskid
steel/aluminium checker plates onto
laminated wood, also on slightly
uneven substrates.
Macroplast UK 8222 Macroplast UK 8223Characteristics (Terokal-722) (Terokal-723)
Chemical Basis 2-component PUR 2-component PUR
Consistency free-flowing/thixotropic creamy/pasty
Sag resistance (vertical application) approx. 1 mm approx. 10 mm
Density (g/cm3) approx. 1.5 approx. 1.7
Pot life (min) approx. 45 approx. 45
Temperature resistant (°C) -30/+100 -30/+100
Nonskid after approx. 3 hours approx. 3 hours
Walkable after approx. 8 hours approx. 8 hours
P R O D U C T
Adhesion
Very good adhesion to wood, derived timber products, painted or primer-coated metals. For raw steel and rawaluminium we recommend that the parts should be roughened or, if necessary, an adhesive promoter should be used.
![Page 15: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/15.jpg)
Page 7/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Macroplast UK 8222 (Terokal-722)
Macroplast UK 8222 is a solvent-free, two-component polyurethane adhesive for horizontal and inclined adhesivebonding applications. It is applied using spatulas and characterised by low initial and high final strength. It is free-flowingand has a levelling effect. Indentations in the substrate are levelled-out. The thickness of the layer applied is between 1and 2 mm.
Macroplast UK 8223 (Terokal-723)
Macroplast UK 8223 is a solvent-free, two-component polyurethane adhesive for horizontal and vertical adhesivebonding applications. It is applied using spatulas. Owing to its high sag resistance, it can be applied to verticalsurfaces up to a layer thickness of 10 mm. Macroplast UK 8223 is also used for structure-borne sound absorption.
Product range
Macroplast UK 8222 ■ Pail 5 kg (component A)■ Tin 1 kg (component B)
Macroplast UK 8223 ■ Pail 6 kg (component A)■ Tin 2 kg (component B)
Test certificates
Macroplast UK 8222 ■ Fire behaviour in accordance with DIN 4102 - B1Test certificate: Z PA-III 2.796Test institute: FMPA, Stuttgart (external supervision)
Macroplast UK 8223 ■ Fire behaviour in accordance with DIN 4102 - B1Test certificate: Z PA-III 2.797Test institute: FMPA, Stuttgart (external supervision)
![Page 16: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/16.jpg)
Page 8
Bonding of insulating materials
(glass/mineral wool mats,
Resonaflex) onto (primer-)
coated interior walls.
Characteristics Terokal-3958 Adhesin J 1626 Terostat-MS 930
Chemical Basis synthetic rubber (SBR) synthetic resin dispersion MS-polymer
Consistency liquid, applied with a roller medium viscosity creamy, pasty
Density (g/cm3) approx. 0.87 approx. 1.0 approx. 1.5
Solids content (%) approx. 41 approx. 67 approx. 100
Temperature resistant (°C) -30/+80 -20/+80 -30/+80
P R O D U C T
Adhesion
Very good adhesion to dry surfaces which are free of dust and grease.
Bonding of insulating materials/mats
![Page 17: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/17.jpg)
Page 8/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terokal-3958
Terokal-3958 is a solvent-containing contact adhesive based on styrene-butadiene rubber (SBR). It is applied by means of rollers or brushes. It displays very good initial strength and has only a slight tendency to stringing. Terokal-3958 is applied in liquid form.
Adhesin J 1626
Adhesin J 1626 is a solvent- and plasticiser-free pressure-sensitive adhesive based on an acrylic ester dispersion. The product has high cohesion and high surface tack. It cures to a transparent film which is highly ageing resistant.
Terostat-MS 930
Terostat-MS 930 is a soft-elastic, one-component sealant based on silane-modified polymer. It displays universaladhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be painted over, curesquickly and has a very low volume shrinkage (100% solid). Terostat-MS 930 is free of solvents, PVC, isocyanates andsilicone and is odourless.
Test certificates
Terokal-3958 ■ Fire behaviour in accordance with DIN 4102 - B1Test certificate Z PA-III 2.1235Test institute: FMPA, Stuttgart (external supervision)
Product range
Terokal-3958 ■ Pail 9.5 kg
Adhesin J 1626 ■ Hobbock 28 kg
Terostat-MS 930 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey, black■ Hobbock 18 L colours: white, black
![Page 18: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/18.jpg)
Page 9
Sealing between the coach body andthe window rubber seal
Elastic sealing applied between the
window rubber seal and the coach
body to prevent the migration of
moisture and subsequent corrosion.
Characteristics Terodicht-elastik Terostat-2759
Chemical Basis synthetic rubber butyl rubber
Colour black dark grey
Consistency pasty pasty
Density (g/cm3) approx. 1.5 approx. 1.4
Solids content (%) approx. 85 approx. 85
Temperature resistant (°C) -30/+80 -30/+80
Ageing resistance very good very good
P R O D U C T
Adhesion
Rubber parts must be free of talcum and separating agents.
![Page 19: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/19.jpg)
Page 9/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terodicht-elastik
Terodicht-elastik is a one-component sealant based on synthetic rubber. It contains a small amount of solvent.Displaying very good sag resistance, it shows also good resistance to ageing and is heat and cold proof. Variations of temperature cause only slight volume changes. It is easily processed.
Terostat-2759
Terostat-2759 is a high-quality, sprayable, one-component sealant based on butyl rubber. It contains a small amountof solvent. After the solvent's evaporation, the product remains permanently plastic, resistant to ageing and weatheringand provides good sealing. After it is dried, the exceeding material can be dabbed-off with Terostat-IX.
Product range
Terodicht-elastik ■ Cartridge 310 ml
Terostat-2759 ■ Cartridge 310 ml■ Wallet 570 ml
![Page 20: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/20.jpg)
Page 10
Characteristics Terostat-8590 UHV Terostat-8597 Terostat-MS 939 Terostat-MS 9360
Chemical Basis polyurethane polyurethane MS-polymer MS-polymer
Consistency pasty, sag resistant pasty, sag resistant pasty pasty
Density (g/cm3) approx. 1.2 approx. 1.2 approx. 1.5 approx. 1.4
Skin formation time (min) approx. 20 approx. 25 10-15 10 - 15
Curing rate (mm/day) 4 4 - 5 3 3 - 4
Shore-A-hardness approx. 55 approx. 55 60 55
UV-resistant conditional conditional yes yes
Ability to overpaint yes yes yes yes
Ageing resistance very good very good very good very good
Tensile strength (DIN 53 504) approx. 8 MPa approx. 8.5 MPa approx. 3.0 MPa approx. 3.5 MPa
Tension value (DIN 53 504)at 100% elongation approx. 2 MPa approx. 2.5 MPa approx. 1.6 MPa approx. 1.8 MPa
Elongation at break (DIN 53 504) approx. 400% approx. 300% approx. 250% approx. 190%
Direct glazing and sealing of the connection joints
Direct glazing (bonding) of window
panes into railway vehicles and
sealing of the connecting joints
between the coach body and the
window pane/window frame.
Adhesion
Terostat-8590 UHV/Terostat-8597: The substrates' surfaces must be clean, dry and free of anti-adhesivecomponents. Glass shall be pre-treated with the glass primer-8511; paints shallbe pre-treated with the paint primer-8521.
Terostat-MS 939/9360: Good adhesion without primer to almost all substrates.
P R O D U C T
![Page 21: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/21.jpg)
Page 10/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terostat-8597
Terostat-8597 is a black, highly viscous, extremely sag resistant, one-component polyurethane-based adhesive/sealant with high tensile shear strength (even aged). It cures quickly. Depending on its area of application, it is availablein different types.
Terostat-MS 939
Terostat-MS 939 is an elastic, one-component adhesive/sealant based on silane-modified polymer. It displays universaladhesion without primer and shows good resistance to weathering, UV rays and ageing. It can be painted over, curesquickly and has a very low volume shrinkage (100% solid). Terostat-MS 939 is free of solvents, PVC, isocyanates andsilicone and is odourless.
Terostat-MS 9360
Terostat-MS 9360 is a black, elastic, one-component adhesive/sealant based on silane-modified polymer. It displaysmedium strength and universal adhesion without primer and shows good resistance to weathering, UV rays andageing. It can be painted over, cures quickly and has a very low volume shrinkage (100% solid). Once cured com-pletely, Terostat-MS 9360 displays high abrasion resistance. It is odourless, free of solvents, PVC, isocyanates andsilicone.
Product range
Terostat-8590 UHV ■ Cartridge 310 ml■ Wallet 600 g■ Larger packaging units upon request
Terostat-8597 ■ Cartridge 310 ml■ Larger packaging units upon request
Terostat-MS 939 ■ Cartridge 310 ml colours: white, grey, black■ Wallet 570 ml colours: white, grey, black
Terostat-MS 9360 ■ Cartridge 310 ml■ Wallet 310 ml■ Hobbock 25 kg
Terostat-8590 UHV
Terostat-8590 UHV is a black, highly viscous, sag resistant, one-component polyurethane-based adhesive/ sealantwith high tensile shear strength (even aged). It cures quickly. Depending on its area of application, it is available indifferent types.
![Page 22: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/22.jpg)
Page 11
Bonding of rubber elements
Bonding of different rubber
seals/profiles/mats to one another
or to different substrates (such as
primer-coated/painted metals or
derived timer products) e.g. door
frame seals.
Characteristics Terokal-2444 Klebus-Spezial Terostat-MS 9360
Chemical Basis polychloroprene (CR) polychloroprene (CR) MS-polymer
Consistency liquid, applied liquid, applied pastywith a brush with a brush or spatula
Density (g/cm3) approx. 0.91 approx. 0.92 approx. 1.4
Solids content (%) approx. 30 approx. 26 100
Temperature resistant °C -30/+90 -30/+80 -40/+100
Type of bonding contact contact elastic
Consumption (g/m2) approx. 250 - 300 approx. 250 - 300 not defined
P R O D U C T
Adhesion
Very good adhesion to substrates which are dry, clean and free of grease. Rubber parts must be free of talcum andseparating agents.
![Page 23: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/23.jpg)
Page 11/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terokal-2444
Terokal-2444 is a contact adhesive based on polychloroprene (CR) with excellent properties for brush and spatulaapplications. It displays high final strength, but is also characterised by high initial strength and good contact ability.The adhesive bond obtained is flexible, as well as water and heat resistant. Terokal-2444 contains solvents.
Klebus-Spezial
Klebus-Spezial is a contact adhesive based on polychloroprene (CR) with excellent properties for brush and spatulaapplications. It displays final strength, reaching rapidly initial strength. The adhesive bond obtained is flexible, as well aswater and heat resistant. Klebus-Spezial contains solvents.
Terostat-MS 9360
Terostat-MS 9360 is a black, elastic, one-component adhesive/sealant based on silane-modified polymer. It displaysmedium strength, universal adhesion without primer and shows good resistance to weathering, UV rays and ageing.It can be painted over, cures quickly and has a very low volume shrinkage (100% solid). Once cured completely,Terostat-MS 9360 displays high abrasion resistance and is odourless, as well as free of solvents, PVC, isocyanatesand silicone.
Product range
Terokal-2444 ■ Tube 175 g■ Tin 670 g■ Pail 5 kg■ Hobbock 23 kg
Klebus-Spezial ■ Tin 660 g■ Pail 5 kg
Terostat-MS 9360 ■ Cartridge 310 ml■ Wallet 310 ml■ Hobbock 25 kg
![Page 24: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/24.jpg)
Page 12
Characteristics Terophon-112 DB
Chemical Basis synthetic resin dispersion
Application sprayed-on (or applied with a spatula)
Density at 20 °C (g/cm3)- wet approx. 1.4- dry approx. 1.2
Volume shrinkage during the drying process (%) approx. 18
Sag resistance on vertical surfaces (mm) 6 - 8
Ability to overpaint yes
Temperature resistant (°C) -50/+120
Water resistance (permanent exposure) no
Drying time at 20 °C (layer thickness 4 mm, applied wet) approx. 24 hours
Diluent/cleaner water
Structure-borne sound deadening of thecoach body, the side walls and the roof(inside applications)
Sound deadening of the steel or
aluminium walls and roofs. This
helps to reduce the propagation
of structure-borne noise and thus
reduces the noise level inside the
vehicel.
P R O D U C T
Adhesion
Very good adhesion to almost all substrates.
Non-galvanised steel sheet and raw aluminium sheet require preliminarycorrosion protection.
X = relation of coating: substrate thickness.
Loss factor according to EN ISO 6721-3
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1
X=1:1
Steel sheet
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1
X=1:1
Aluminium sheet
Temperature (°C)
Temperature (°C)
![Page 25: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/25.jpg)
Page 12/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terophon-112 DB
Terophon-112 DB was especially developed for the structure-borne sound deadening in roofs and side walls of railwayvehicles. In addition to its high loss factor it displays excellent fire behaviour (see test certificates), is free of halogenand solvents and does not contain other contaminants either.
Owing to its great range of favourable properties, Terophon-112 DB has been globally used for more than 10 yearsnow with success in passenger coaches, metros, tramways or locomotives and is thus the leader among the bitumen-free dispersion products.
Test certificates
■ Fire behaviour in accordance with DIN 5510Combustibility class: S4Smoke generation class: SR 2Dripping class: ST2
■ Aachen Technical University (evaluation of the acute inhalation toxicity)- released smouldering gases are toxically harmless.
■ Republic of France (Police department)- Material fire reaction test
Classification: M1 (record no. 449/99)- Smoke classification - standard NF F 16-101
Category FO (Test certificate no. 449/99)- Smoke opacity determination test
(Test certificate no. 447/99)- Measurement of gases released by pyrolysis and combastion
(Test certificate no. 448/99)
■ EMPAComplies with the supply conditions of the Swiss Federal Railways with regard to paints, sheet 46.41 of October 1986
■ American National Standard NFPA 130ASTM E 662-83: D (4.0) = 86ASTM E 162-83: I = 6.3
■ BS 6853: 1999- Appendix D (warres No. 301581)
Result: Ao (on) = 1.8Ao (off) = 2.3
- BS 476: Part 6 (Warres No. 301252)Result: Fire propagation index I = 5.2/i1 = 0.0
- BS 476: Part 7 (Warres No. 301254)Result: Class 1
Product range
Terophon-112 DB ■ Hobbock 40 kg■ Drum 250 kg
![Page 26: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/26.jpg)
Page 13
Structure-borne sound deadening of the coach body
Sound deadening of the steel or
aluminium rough bodywork. This
helps to reduce the propagation
of structure-borne noise and thus
reduces the noise level inside the
vehicel.
Characteristics Terophon-123 WF
Chemical Basis aqueous synthetic resin dispersion
Application sprayed-on (or applied with a spatula)
Density at 20 °C (g/cm3)
- wet approx. 1.4- dry approx. 1.3
Volume shrinkage during the drying process (%) 20 - 25
Sag resistance on vertical surfaces (mm) 6 - 8
Ability to overpaint yes
Temperature resistant (°C) -50/+120
Water resistance (permanent exposure) yes
Drying time at 20 °C (layer thickness 4 mm, applied wet) approx. 40 hours
Diluent/cleaner water
P R O D U C T
Adhesion
Very good adhesion to almost all substrates.
Non-galvanised steel sheet and raw aluminium sheet require preliminarycorrosion protection.
X = relation of coating: substrate thickness.
Loss factor according to EN ISO 6721-3
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1
X=1:1
Steel sheet
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1
X=1:1
Aluminium sheet
Temperature (°C)
Temperature (°C)
![Page 27: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/27.jpg)
Page 13/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terophon-123 WF
Terophon-123 WF is a sprayable, sound deadening mass based on an aqueous synthetic resin dispersion and othermaterials with a low contaminant content. In addition to its high loss factor, Terophon-123 WF displays excellent fireresistance behaviour. The dried coating can be directly exposed to moisture over a prolonged period without runningthe risk of an adhesion loss. The beginning of a slight plastifying process of the coating is reversible. A permanentexposure to water for more than 3 months must be avoided.
Terophon-123 WF is a further development of Terophon-112 DB. Owing to its increased resistance to water, it can also be applied in floor areas (in addition to the wall and roof areas of application), assuming that appropriate waterdrainage holes be provided. With respect to corrosion protection, the relevant provisions of the German Railways (DB AG) must be adhered to.
Test certificates
■ Fire behaviour in accordance with DIN 5510Combustibility class: S4Smoke generation class: SR 2Dripping class: ST 2
■ BS 6853: 1999- Appendix D (Warres No. 301582)
Result: Ao (on) = 2.6Ao (off) = 3.1
- Annex B.2 Toxic fume (Rapra 36257)Result: R=0.46
- BS 476: Part 6 (Warres No. 301369)Result: Fire Propagation index I = 8.6/i1= 0.1
- BS476: Part 7 (Warres No. 301368)Result: Class 1
Product range
Terophon-123 WF ■ Hobbock 35 kg■ Drum 250 kg
![Page 28: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/28.jpg)
Page 14
Underbody protection and/or sounddeadening of the coach floor
Protection of the underbody against
stone chipping and abrasion due to drift
sand and gravel. This helps to avoid
dotted corrosion.
Owing to its high loss factor,
Terotex-218 is also applied from below
for sound deadening of the coach floor
or the wheel guards.
Characteristics Terotex-218
Chemical Basis aqueous synthetic dispersion
Application sprayed-on (airless)
Density at 20 °C (g/cm3)- wet approx. 1.34- dry approx. 1.55
Volume shrinkage duringthe drying process (%) approx. 33
Sag resistance onvertical surfaces (mm) 4
Ability to overpaint yes
Temperature resistant (°C) -25/+80
Drying time at 20 °C (layer thickness 2 mm, applied wet) approx. 20 - 48 hours
Diluent/cleaner water
P R O D U C T
Adhesion
Very good adhesion to primer-coated metal sheets (two-component epoxyprimer-coatings). For non-galvanised steel sheet and raw aluminium sheetwe recommend preliminary corrosion protection.
X = relation of coating: substrate thickness.
Loss factor according to EN ISO 6721-3
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1X=1:1
Steel sheet
-40 -20 0 20 40 60 800.01
0.1
1
Loss
fact
or a
t 20
0 H
z
X=4:1
X=2:1X=1:1
Aluminium sheet
Temperature (°C)
Temperature (°C)
![Page 29: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/29.jpg)
Page 14/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Terotex-218
Terotex-218 is an airless sprayable coating mass based on an aqueous synthetic resin dispersion with a good fireresistance behaviour and very good adhesion to wood and primer-coated metals (two-component epoxy primercoatings). The dried coating is flexible, UV-proof and highly abrasive resistant. Once dried completely, it can be painted over. It is free of solvents, PVC or isocyanates and is odourless.
Terotex-218 has a good loss factor and can therefore be used for the structure-borne noise absorption of railwayvehicles' exterior, e.g. wheel guards of low-loader wagons.
Test certificates
■ Fire behaviour in accordance with DIN 5510Combustibility class: S3Smoke generation class: SR 2Dripping class: ST 2
Product range
Terotex-218 ■ Hobbock 30 kg■ Drum 200 kg
![Page 30: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/30.jpg)
Page 15
Generation of a jointless insulated "S" type fastening
Joint insulation of rails and point switches
employed for the controlling of the track
circuit and for achieving a welded track
which is free of joints.
Characteristics Metallon E 2602
Chemical basis 2-component epoxy resin
Consistency pasty
Colour grey
Density (g/m3) 1.45
Solids content (%) 100
Temperature resistance (°C) -30/+120
Initial strength (20 °C) 7 hours
Final strength (20 °C) 3 days
Load at rupture under tensile load 140 - 165 t
P R O D U C T
Adhesive bonding of the insulated "S" type rail joint:Generated by using Metallon E 2602 and rigid fabric F from KKV Kassebaum GmbH
![Page 31: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/31.jpg)
Page 15/05.01
Further technical information and instructions may be obtained from the latest edition of the Technical Data Sheet and/or Safety Data Sheet.
Product description
Metallon E 2602
Metallon E 2602 is a high-quality, pasty, solvent-free two-component adhesive based on epoxy resin. It displays a widerange of adhesion. Owing to its high tensile shear strength, this adhesive is often used for metal/metal adhesivebondings.
Metallon E 2602 was especially developed for the generation of glued insulated fastenings created at the DB AG "S"type rails and point switches. The load at rupture under tensile load (140 - 165 t) measured on the test bench isdefinitely above the maximum tensile load of 70 - 90 t, as it occurs for example in the rail S 49 (rail length 120 m).Combined with the specifically modified rigid fabric F from the KKV Kassebaum GmbH company, this insulatedfastening ensures control of the track circuit and guarantees a welded track without joints.
The "S" type insulated fastening generated using Metallon E 2602 is characterised by its high technical performance,long lifetime (approx. 12 to 14 years) and low maintenance costs. This is why it has been employed more than 10million times in every continent since 1964.
Product range
Metallon E 2602 ■ Tin 350 g (component A) ■ Pail: 5 kg■ Tin 350 g (component B) ■ Pail: 5 kg
![Page 32: Products for the Railway Industry - Brammer - · PDF fileProducts for the Railway Industry. Page 1 Adhesion ... Terostat-MS 935 is an elastic, one-component sealant/adhesive based](https://reader034.vdocuments.net/reader034/viewer/2022050801/5aa206777f8b9a80378c6fa0/html5/thumbnails/32.jpg)
Henkel Teroson GmbH · General Industry
69112 Heidelberg · Phone +496221 704490 · Fax +496221 705201