products - gyproc middle east · accessories, and a wide range of ceiling tiles and boards. this...
TRANSCRIPT
www.gyproc.ae
The extensive range of Gyproc boards and skimming plasters is fully supported by high grade metal system components and accessories, and a wide range of ceiling tiles and boards. This unrivalled choice of products enables the designer to specify complete integrated systems with total confidence.
Gyproc Access Panels - non fire-rated 241
Gyproc Access Panels - 60 minutes fire-rated 241
Gyproc Access Panels - 120 minutes fire-rated 241
Access panels
Gyptone Activ’Air boards, tiles and planks 244-247
Rigitone boards 248-249
Acoustic gypsum based ceiling products
Gyproc standard plasterboards 218
Gyproc performance plasterboards 219-222
Specialist boards 223
Boards
Gypframe studs 227
Gypframe channels 227-229
Gypframe accessories 228
Gypframe steel angles 229
Metal components
Gyproc fixing products 231-233
Gypframe fixing products 233
Specialist board fixing products 233
Fixings
Product contents
Product index
Prro
duct
s
Gyproc jointing materials 236
Gyproc miscellaneous accessories 237
Gyproc beads 237
Plasterboard accessories
Skimming plasters 239
Plasters
215
www.gyproc.ae
Gyproc plasterboards are the ultimate lining solution for today's buildings, providing high levels of fire, sound, thermal, moisture and impact resistance to create modern internal environments that offer comfort and safety for occupants. They offer high quality, high performance linings for walls and ceilings, lift shafts and stairwells, corridors and auditoria, in buildings as diverse as houses, schools, hospitals and cinemas.
Gyproc Regular 218
Aquaroc Fibre Cement Board 223
219
219
220
220
221
221
222
222
Gyproc performance plasterboards
Specialist boards
Gyproc standard plasterboards
Gyproc plasterboards
Board product index
Gyproc offers a comprehensive bespoke service for the Gyproc plasterboard and Gypframe metal product ranges. Whether you require a non-standard length, alternative edge profile or other specification change, we will try to provide you with the best solution for your project.
For more information contact the customer service centre on +971 800 GYPROC (497762)
Bespoke products
Plas
terb
oard
s
Gyproc Activ’Air
Gyproc Moisture Resistant
Gyproc M2TECH
Gyproc FireStop
Gyproc FireStop MR
Gyproc DuraLine
Gyproc DuraLine MR
Gyproc CoreBoard
217
www.gyproc.ae
Plas
terb
oard
sGyproc standard plasterboards
Product Characteristics Applications
Board ColourIvory face paperBrown reverse side paper
Gyproc Regular
Manufacturing StandardsBritish Standard BS 1230 – Type 1European Standard EN 520 – Type AAmerican Standard ASTM C1396 – Section 5
Edge TypeWidth (mm)
9mm
* other lengths available on request
12.5mm
12.7mm
15mm
15.9mm
12001220
12001220
12001220
12201200
12201200
Length (mm)*
2400, 30002440
2000, 2400, 2500, 2600, 2700, 2800, 30002440, 3000
2000, 2400, 2500, 2600, 2700, 2800, 30002440, 3000
2440, 30002400, 3000
2440, 30002400, 3000
T/ET/E
T/ET/E
T/ET/E
T/ET/E
T/ET/E
Product Matrix
Gyproc Regular plasterboard consists of an aerated gypsum core encased in, and firmly bonded to, strong paperliners. Gyproc Regular is a plasterboard that is suitable for drylining internal surfaces.
Suitable for most system applications where normal fire, structural and acoustic levels are specified. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
218
www.gyproc.ae
Plas
terb
oard
s
Gyproc performance plasterboards
Edge TypeWidth (mm)
12.5mm1200 T/E
12.7mm1200 T/E
15mm1200 T/E
15.9mm1200
Length (mm)*
2400, 3000
2400, 3000
2400, 3000
2400, 3000 T/E
Product Matrix
* other lengths available on request1 Gyproc Activ’Air is also available in a Moisture Resistant, FireStop, DuraLine and M2TECH variant.
Applications
Board ColourIvory face paper
Gyproc Activ’Air consists of an aerated gypsum core with other additives encased in, and firmly bonded to strong paperliners and is suitable for drylining internal surfaces. Gyproc Activ’Air actively improves indoor air quality by permanently removing 70% of formaldehydes.
Gyproc Activ’Air is suitable for most system applications where normal fire, structural and acoustic levels are specified. Suitable for direct decoration.
Manufacturing StandardsBritish Standard BS 1230 - Type 1
European Standard EN 520 - Type A
American Standard ASTM C1396 - Section 5
NEW
Brown reverse side paper
Product Characteristics
Gyproc Activ'Air1
Product Characteristics
Gyproc Moisture Resistant
Applications
Board ColourGreen face paperGreen reverse side paper
Manufacturing StandardsBritish Standard BS 1230 – Type 3 & 4
European Standard EN 520 – Type A & H1
American Standard ASTM C1396 – Section 7
Edge TypeWidth (mm)
* other lengths available on request
12.5mm
15mm
15.9mm
1200
12201200
12201200
Length (mm)*
2000, 2400, 2500, 2600, 2700, 2800, 3000
2440, 30002400, 3000
2440, 30002400, 3000
T/E
12.7mm1200 2000, 2400, 2500, 2700, 2800, 3000 T/E
T/ET/E
T/ET/E
Product Matrix
Gyproc Moisture Resistant consists of an aerated gypsum core with water repellent additives encased in, and firmly bonded to, strong Moisture Resistant paperliners that are green in colour. Gyproc Moisture Resistant is a plasterboard that is suitable for drylining internal surfaces.
Suitable as a base for tiling wet use areas, such as bathrooms and kitchens. Also used for external soffits in sheltered positions. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
now
available with
also available
219
www.gyproc.ae
Plas
terb
oard
sGyproc performance plasterboards
Applications
Board Colour Manufacturing Standards
NEW
Product Characteristics
Gyproc M2TECH1
Product Characteristics
Gyproc FireStop
Applications
* other lengths available on request
Gyproc FireStop consists of an aerated gypsum core with glass fibre and other additives encased in, and firmly bonded to, strong paperliners that are pink in colour. Gyproc FireStop is a plasterboard that is suitable for drylining internal surfaces.
Used in Gyproc partition, ceiling and shaftwall systems to give increased fire protection. Also used for protection to structural steel. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
Edge TypeWidth (mm)
12.5mm1200 T/E
12.7mm1200 T/E
15mm1200 T/E
15.9mm1200 T/E
Product Matrix
1 Gyproc M2TECH is also available in a FireStop, DuraLine, CoreBoard and Activ’Air variant.2 The boards achieve scores of 10 and 0 as per ASTM D 3273 and ASTM G 21 respectively, the best possible scores for these tests.
The system has been specially developed for high moisture environments, such as kitchens, wet rooms, gym and pool areas etc. It is ideal as a wall and ceiling lining in residential, commercial, educational and healthcare buildings. The boards must be finished using Mold-Resistant Fibre Tape and ready-mixed mold and moisture resistant Jointing Compound offered by Gyproc as part of the complete M2TECH system
Green face paperGreen reverse side paper
British Standard BS 1230 – Type 3 & 4European Standard EN 520 – Type A & H1American Standard ASTM C1396 – Section 7American Standard ASTM D 3273 and ASTM G 212
Gyproc M2TECH board is a high performance board formulated with biocide and other additives in its core, enclosed with 100% recycled back paper, for applications where enhanced mold and moisture resistance is required.
Manufacturing StandardsBritish Standard BS 1230 – Type 5European Standard EN 520 – Type FAmerican Standard ASTM C1396 – Type X
Edge TypeWidth (mm)
9mm
Length (mm)*
T/E12.5mm
12.7mm
15mm
15.9mm
1200
1200
12201200
12201200
Length (mm)*
2400, 3000
2400, 3000
2400, 3000
2400, 3000
2400, 2700, 2800, 3000
2400, 2700, 2800, 3000
2440, 30002400, 3000
2440, 30002400, 3000
T/E
T/ET/E
T/ET/E
Product Matrix
Board ColourPink face paperBrown reverse side paper
also
available with
now
available with
also available
220
www.gyproc.ae
Plas
terb
oard
s
Board ColourPink face paperGreen reverse side paper
Manufacturing StandardsBritish Standard BS 1230 – Type 3, 4 & 5
European Standard EN 520 – Type F & H1
American Standard ASTM C1396 – Type X & Section 7
www.gyproc.ae
Gyproc performance plasterboards
Applications Product Characteristics
Gyproc FireStop MR
Product Characteristics
Gyproc DuraLine1
Applications Gyproc DuraLine consists of an higher density aerated gypsum core with glass fibre and other additives encased in, and firmly bonded to, strong paperliners that are yellow in colour. Gyproc DuraLine is a plasterboard that is suitable for drylining internal surfaces.
Designed for use in the Gyproc GypWall ROBUST system to give greater impact resistance in heavy use areas. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
* other lengths available on request
Used in Gyproc partitions where increased fire protection is required combined with moisture performance. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
Gypsum plasterboard with glass fibre and water repellent additives in the core.
Gyproc FireStop MR consists of an aerated gypsum core with glass fibre and water repellent additives encased in, and firmly bonded to, strong paperliners. Gyproc FireStop MR is a plasterboard that is suitable for drylining internal surfaces.
now
available with
Edge TypeWidth (mm)
12.5mm
15mm
15.9mm
1200
12201200
12201200
Length (mm)*
2440, 30002400, 3000
2440, 30002400, 3000
T/E
12.7mm1200
2400, 2700, 2800, 3000
2400, 2700, 2800, 3000 T/E
T/ET/E
T/ET/E
Product Matrix
Board ColourYellow face paperBrown reverse side paper
Manufacturing StandardsBritish Standard BS 1230 – Type 5European Standard EN 520 – Type D, F, I & RAmerican Standard ASTM C1396 – Type X
Edge TypeWidth (mm)
15mm12001220
Length (mm)*
2400, 30002440, 3000
T/ET/E
Product Matrix
* other lengths available on request
also available
now
available with
221
Product Characteristics
Gyproc DuraLine MR
Applications Gyproc DuraLine MR consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to strong paper liners. Gyproc DuraLine MR is a plasterboard that is suitable for drylining internal surfaces.
Designed for use in the Gyproc GypWall systems to give greater moisture resistance and greater impact resistance in heavy use areas.
Board ColourYellow face paperGrey reverse side paper
Manufacturing StandardsBritish Standard BS 1230 – Type 3, 4 & 5European Standard EN 520 – Type D, F,H1, I & RAmerican Standard ASTM C1396 – Section 7, Type X
Edge TypeWidth (mm)
15mm12001220
Length (mm)*
2400, 30002440, 3000
T/ET/E
Product Matrix
* other lengths available on request
www.gyproc.ae
Plas
terb
oard
sGyproc performance plasterboards
Manufacturing StandardsBritish Standard BS 1230 – Type 3, 4 & 5
European Standard EN 520 – Type D, F, H1
American Standard ASTM C1396 – Section 6, 7 & Type X
Edge TypeWidth (mm)
19mm598
Length (mm)*
3000 S/E
Product Matrix
* other lengths available on request
Applications
Board Colour
Product Characteristics
Gyproc CoreBoard
Used as the main board in the Gyproc ShaftWall system to provide fire protection with temporary moisture protection during construction. Can be finished using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc Jointing Compound. Suitable for direct decoration.
Green face paperGreen reverse side paper
A 19mm thick version of Gyproc FireStop MR board, Gyproc CoreBoard consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to strong moisture resistant paperliners.
now
available with
222
www.gyproc.ae
Light grey colour
Spec
ialis
t B
oard
Gyproc specialist boards
Edge TypeWidth (mm) Length (mm)
6mm1200 S/E2400
9mm1200 2400 S/E
12mm1200 2400 S/E
15mm1200 2400 S/E
Product Matrix
Applications
Board Colour
Aquaroc is an asbestos-free, cellulose fibre reinforced cement board that is very dense with a non-porous surface. The excellent moisture resistant characteristics and mechanical strength of Aquaroc cement board makes it an ideal tile backer board that can be used in wet areas such as kitchens, bathrooms, shower areas and even on spa areas.
Aquaroc Fibre cement board is suitable as a base for tiling in wet areas. It can also be used for external soffits in sheltered positions.
Manufacturing StandardsASTM C1186 - Type B Grade 2
NEW
Product Characteristics
Aquaroc Fibre Cement Board
223
www.gyproc.ae
Met
al c
ompo
nen
ts
Gypframe metal stands for quality, strength and durability through a range of components that provide the backbone for our tested and warranted wall, ceiling, lining and encasement systems.
The unique manufacturing process, including the patented UltraSteel™ double helix work hardening process, means that Gypframe metal components are:
• Precision engineered for premium quality • Lighter to carry and handle • Easier to cut and fit • Rigidised for extra strength • Allow enhanced screw fixing and retention• The only metal components to carry the • SpecSure system performance warranty when installed in our proprietary systems
Gypframe metal components
‘C’ Studs
‘I’ Studs
227
227
Standard Channels
Deep Channels
Extra Deep Channels
MF Ceiling Channels
Fixing Channels
Gypframe Stud & Accessories
ShaftWall Starter & Retaining Channels
Gypframe Angles
227
227
228
228
228
228
229
229
Gypframe channelsGypframe studs
Metal components index
Benefits of Gypframe:• Galvanised steel that will not warp or rust• Easy to cut on site, saving time and creating no mess• Limited waste - any off-cuts can be recycled• Self locking studs and channels, that are quick to install• Improved screw retention and strip out strength• Improved resistance to screw pull-out• Lightweight – easy to move around site and build to greater
height Manufacturing Standards:All Gypframe components are rigourously tested to internationally recognised product standards and conform to.
• British Standard BS 7364• European Standard EN 14195• American Standard ASTM C645
225
Met
al c
ompo
nen
ts
www.gyproc.ae
Gyproc offers a comprehensive bespoke service for the Gyproc plasterboard and Gypframe metal product ranges. Whether you require a non-standard length, alternative gauge or other specification change, we’ll try to provide you with the best solution for your project. Specifying bespoke metal lengths can speed up construction as there is no need to trim them to the correct length, and will save waste on site, helping with site safety and cost reduction.
For more information contact the customer service centre on +971 800 GYPROC (497762)
Bespoke Gypframe
To understand a Gypframe metal product, follow thesesimple steps:
The first 2 or 3 digits refer to the component width
The letter refers to the product type i.e.,S = Stud, C = Channel
The last two digits indicate the metal thickness or gauge inmm i.e., 0.50mmSee example below
Gypframe reference codes and abbreviations
Step 1
Step 2
Step 3
Component width in mmExample = 70mm
Component typeExample = 'I' Stud
Stud gaugeExample = 0.70mm
70 I 70
Flange Dimension
32mm / 34mm
38mm
25mm
50mm
70mm
15mm
30mm
69mm x 22mm
38mm x 12.5mm
25mm x 25mm
38mm x 12.5mm
103/153 x 9mm
Key
S
I
C
DC
EDC
RC
SC
MF5
MF7
GA1
GL1
FC
Gypframe Component
‘C’ Stud
‘I’ Stud
Channel
Deep Channel
Extra Deep Channel
Retaining Channel
Starter Channel
Furring Channel
Main Channel
Wall Angle
GypLyner Channel
Fixing Channel
226
www.gyproc.ae
Met
al c
ompo
nen
ts
Product CharacteristicsUsed as the vertical support in wall framing. A range of widths, lengths and thicknesses depending on requirements for strength, height, impact resistance and sound insulation. Manufactured using patented, UltraSteel™ technology giving a rigidised surface for additional strength. Service cut-outs are also placed along the spine of Gypframe ‘C’ Studs providing easy routing of services through the partition.
^ - Also available in 0.6, 0.7, 0.8 and 0.9 thickness* - Bespoke lengths available on request
Product MatrixComponent^
50 S 5063 S 5070 S 5073 S 5092 S 50100 S 50150 S 50
Length (mm)*
3000300030003000300030003000
Gypframe ‘I’ Studs
Product CharacteristicsThese studs are the strongest available in the Gypframe range. They allow for increased partition height, without increasing the partition width, and provide improved impact resistance. Commonly used in ShaftWall, Gyplyner IWL, GypWall QUIET IWL and other GypWall systems. Service cut-outs are also spaced along the spine of the Gypframe ‘I’ Stud, providing easy routing of services through a partition.
* - Bespoke lengths available on request
Product MatrixComponent
70 I 70100 I 80150 I 90
Length (mm)*
300030003000
Gypframe studs and channels
Gypframe ‘C’ Studs
Gypframe Standard Channels
Product CharacteristicsGypframe channels are used for securing Gypframe ‘C’ Studs at floor and ceiling junctions. Gypframe Channels (C) are used for partition heights of up to 4200mm and are manufactured using the patented UltraSteel™ process giving a rigidised surface for better screw holding and increased tensile strength.
^ - Also available in 0.6, 0.7, 0.8 and 0.9 thickness* - Bespoke lengths available on request
Product MatrixComponent^
52 C 5065 C 5072 C 5075 C 5094 C 50102 C 50152 C 50
Length (mm)*
3000300030003000300030003000
Gypframe Deep Channels
Product CharacteristicsGypframe channels are used for securing Gypframe ‘C’ Studs at floor and ceiling junctions. Gypframe Deep Channels (DC) are used for partition heights between 4200mm and 8000mm or in situations where deflection heads or improved impact resistance are required. Deep Channels are manufactured using the patented UltraSteel™ process giving a rigidised surface for better screw holding and increased tensile strength.
^ - Also available in 0.7, 0.8 and 0.9 thickness* - Bespoke lengths available on request
Product MatrixComponent^
52 DC 6065 DC 6072 DC 6075 DC 6094 DC 60102 DC 60152 DC 60
Length (mm)*
3000300030003000300030003000
227
Met
al c
ompo
nen
ts
www.gyproc.ae
Gypframe MF Ceiling Channels and accessories
Product CharacteristicsGypframe MF Ceiling Channels are used for providing a robust false ceiling system. These sections are manufactured using the patented UltraSteel™ process giving a rigidised surface for better screw holding and increased tensile strength.
^ - Also available in 0.6, 0.7, 0.8 and 0.9 thickness, MF7 is also available in 1.5 thickness.* - Bespoke lengths available on request
Product MatrixComponent
MF5 (Furring) Section
MF7 (Furring) Channel
Soffit Cleat with Nut & Bolt
Thickness (mm)^
0.5
0.5
-
Length (mm)*
3000
3000
Box
Gypframe Extra Deep Channels
Product CharacteristicsGypframe channels are used for securing Gypframe ‘C’ Stud at floor and ceiling junctions. Gypframe Extra Deep Channels (EDC) are used for partition heights over 8000mm or in situations where deflection head details or improved impact resistance is required. Extra Deep Channels are manufactured using the patented UltraSteel™ process giving a rigidised surface for better screw holding and increased tensile strength.
^ - Also available in 0.9 thickness* - Bespoke lengths available on request
Product MatrixComponent^
52 EDC 8065 EDC 8072 EDC 8075 EDC 8094 EDC 80102 EDC 80152 EDC 80
Length (mm)*
3000300030003000300030003000
Gypframe Channels Gypframe Stud and accessories
Gypframe studs, channels and accessories
Product CharacteristicsThese components are designed to aid the installation of plasterboard linings directly to concrete and blockwork walls. They are manufactured using the patented UltraSteel™ process giving a rigidised surface for better screw holding and increased tensile strength.
^ - Also available in 0.6, 0.7 and 0.8 thickness* - Bespoke lengths available on request
Product MatrixComponent
GL1 Stud
GLB85 Bracket
GLB135 Bracket
Thickness (mm)^
0.5
-
-
Length (mm)*
3000
Box
Box
Product CharacteristicsUsed to maintain board fixings along horizontal joints in multi-layer boarded systems and to give added support for fixtures and fittings.
* - Bespoke lengths available on request
Product MatrixComponent
Fixing Channels103 FC 50
103 FC 90
153 FC 90
Service Support Plate
Thickness (mm)^
0.5
0.9
0.9
-
Length (mm)*
2400
2400
2400
92
228
www.gyproc.ae
Met
al c
ompo
nen
ts
ShaftWall Channels
Product CharacteristicsThese products are used for the high performance ShaftWall system used to create lift shaft and service riser linings that can be constructed from one side and provide structural and fire protection applications.
Gypframe channels and angles
* - Bespoke lengths available on request * - GA1 Angle is also available in 0.6, 0.7, 0.8, 0.9 and 1.5mmthickness
Product MatrixComponent
Starter Channels70 SC 70
100 SC 80
150 SC 90
Retaining ChannelsRC 70
RC 100
RC 150
Length (mm)*
3000
3000
3000
3000
3000
3000
Gypframe Angles
Product CharacteristicsGypframe steel angles are widely used in framed construction to provide support, protection, fixing and additional strength to wall, ceiling and encasement framing.
Product MatrixComponent
GA1 Angle (Floor and Ceiling Angle)
GA3 CoreBoard Joint Angle
GA4 Angle
GA6 Splayed Angle
Thickness (mm)
0.5*
0.7
0.7
0.5
Length (mm)
3000
3000
3000
3000
229
www.gyproc.ae
Fixi
ngs
The Gyproc range of fixing products cater for drywall applications, from simple yet secure fixing of plasterboard linings to expansion anchors and sophisticated bonded anchor systems for demanding heavyweight fixing applications.
The Gyproc fixings range includes screws engineered for board-to-metal or metal-to-metal fixing; high performance screws for use with the FireCase encasement system, and special Gypframe fixings for ceiling, lining and floor systems.
Gyproc fixings are designed to deliver optimum performance for all Gyproc systems, and must be specified to ensure compliance with the SpecSure system warranty.
Gyproc, Gypframe and specialist board fixing products
Gyproc Drywall Screws 232
Gyproc Jack-Point Screws 232
Gyproc Wafer Head Drywall Screws 232
Gyproc Wafer Head Jack-Point Screws 232
Aquaroc Screws 233
Specialist board fixing productsGyproc fixing products
Fixings index
231
Fixi
ngs
www.gyproc.ae
Gyproc Jack Point ScrewsGyproc Drywall Screws
Gyproc Wafer Head Screws Gyproc Jack Point Wafer Head Screws
Gyproc fixing products
Product CharacteristicsHigh performance, corrosion resistant self-tapping zinc plated steel screws with countersunk cross-heads. Ideal for fixing plasterboard to light gauge steel framing up to 0.79mm thick. The length of screw selected should be sufficient to give a nominal 10mm penetration into metal framing. Supplied with screwdriver bits.
Manufacturing StandardsEuropean Standard EN14566 - Type A1.
Product MatrixBox QuantityLength (mm)
100010001000500
25354255
Product CharacteristicsCorrosion resistant self-tapping zinc plated steel screws with wafer cross-head. Designed for metal-to-metal fixing of light gauge steel framing up to 0.79mm thick. Supplied with screwdriver bits.
Manufacturing StandardsEuropean Standard EN14566 - Type A1.
Product MatrixBox QuantityLength (mm)
100013
Product CharacteristicsCorrosion resistant self-tapping zinc plated steel screws with wafer cross-head and self-drilling points. Designed for metal-to-metal fixing of light gauge steel framing 0.8mm thick or greater and ‘I’ studs greater than 0.7mm thick. Supplied with screwdriver bits.
Manufacturing StandardsEuropean Standard EN14566 - Type A1.
Product MatrixBox QuantityLength (mm)
100013
Product MatrixBox QuantityLength (mm)
100010001000500
25354255
Product CharacteristicsCorrosion resistant self-tapping zinc plated steel screws with countersunk cross-heads. Ideal for fixing plasterboard to stud framing 0.8mm thick or greater and ‘I’ Studs greater then 0.7mm thick. The length of screw selected should be sufficient to give a nominal 10mm penetration into metal framing. Supplied with screwdriver bits.
Manufacturing StandardsEuropean Standard EN14566 - Type A1.
232
www.gyproc.ae
Fixi
ngs
Aquaroc Screws
Specialist board fixing products
Product CharacteristicsThe screws have a unique head design that countersinks itself into the board allowing easy fixing. Specifically designed for the fixing of Aquaroc Fibre Cement specialist board.
Manufacturing StandardsEuropean Standard EN14566 - Type A1.
Product MatrixBox QuantityLength (mm)
500500500
304662
233
www.gyproc.ae
Plas
terb
oard
acc
esso
ries
To achieve the high performance requirements of a complete Gyproc system solution, a range of superior quality accessories are available. This includes performance tapes, high-strength screws and jointing compounds that achieve seamless joints. Gyproc deliver the very best tried and tested products that adhere to stringent international standards as well as Gyproc’s own rigorous product performance assessment.
Gyproc plasterboard accessories
Gyproc Fibre Tape
Gyproc Paper Tape
Mold Resistant Fibre Tape
236
236
236
Gyproc tapes
Gyproc Jointing Compound
Gyproc M2TECH Jointing Compound
236
236
Gyproc jointing materials
Gyproc FireStrip 237
Gyproc Sealant 237
Gyproc miscellaneous accessories
Gyproc Drywall Metal Corner Bead 237
Gyproc Drywall Metal Edge Bead 237
Gyproc beads
Gyproc accessories index
235
Plas
terb
oard
acc
esso
ries
www.gyproc.ae
Gyproc jointing materials and tapes
Product CharacteristicsA high quality, ready to use, air-drying jointing compound, that can be applied quickly and easily to fill and finish plasterboard joints. A low shrinkage product most commonly hand applied with a working time of approximately 60 minutes, depending upon environmental conditions. For use in all stages of plasterboard jointing to achieve a fine, smooth finish that can be easily sanded as required.
Manufacturing StandardsEuropean Standard EN 13963American Standard ASTM C474/C475
Manufacturing StandardsAmerican Standard ASTM C475
Product MatrixWeight (kg)
28Ready Mixed
Gyproc Jointing CompoundReady Mixed
Product CharacteristicsMoisture & Mold Resistant Compound is a high performance ready mixed joint compound specially developed for high moisture and mold-prone environments.
The ready mixed formulation allows for a quick application and can easily be sanded prior final, direct decoration.
Product MatrixQuantity per Unit
3.5Gal
Gyproc M2TECHJointing Compound
Product Characteristics
Manufacturing Standards
Self-adhesive glass-fibre mesh tape for joint reinforcement in tape and joint situations and also plastered finishes to plasterboard joints. Gyproc Fibre Tape is suitable for flat joints and repairs to small areas of damaged plasterboard. Provides crack resistance.
European Standard EN 13963 - Type T
Gyproc Fibre Tape
Product Characteristics
Manufacturing Standards
A paper tape with added tensile strength to prevent tearing, wrinkling or stretching. The centre crease allows simplified application in corners, whilst chamfered edges and spark perforations prevent bubbling and blistering. Also designed for reinforcing flat joints when finishing plasterboard joints. Provides improved resistance against cracking.
European Standard EN 13963 - Type T
Product MatrixLength (m)
9050
Width (mm)
Product MatrixLength (m)
15050
Width (mm)
Gyproc Paper Tape
Gyproc Mold Resistant Fibre Tape
Product CharacteristicsM2TECH Fibre Tape is a necessary component of the Gyproc M2TECH lining system. It is a high strength, self-adhesive, mold resistant mesh type with an anti-microbial coating that achieves a score of 10 as per ASTM D 3273, the best possible score for this test.
Together with Gyproc Moisture and Mold Resistant board, M2TECH accessories provide the ultimate protection for at-risk areas and buildings.
Manufacturing StandardsEuropean Standard EN 13963 - Type TAmerican Standard ASTM D 3273
Product MatrixLength (m)
9050
Width (mm)
236
www.gyproc.ae
Plas
terb
oard
acc
esso
ries
Product CharacteristicsAn acrylic sealant used for sealing air gaps in Gyproc systems to maintain optimum acoustic performance.
Manufacturing StandardsAmerican Standard ASTM C475/C475MAmerican Standard ASTM C834
Product MatrixQuantity per Unit
30kg
Gyproc SealantGyproc FireStrip
Product MatrixQuantity per Unit
290ml
Product MatrixLength (m)
360025
Width (mm)
Gyproc Drywall Metal Edge Bead
Product CharacteristicsGalvanised steel channel. Asymmetric profile with one perforated leg and pre-formed arris to accommodate jointing material. Used to protect exposed plasterboard edges and form a defined edge to plasterboard area.
Product MatrixLength (mm)*
2400
2400
2400
9.5mm
12.5mm
15mm
* - Bespoke lengths available on request
Product CharacteristicsPerforated galvanised metal bead for reinforcing external 90° angles.
Gyproc Drywall Corner Bead
Product MatrixLength (mm)*
2400
2400
25mm x 25mm
30mm x 30mm
* - Bespoke lengths available on request
Product CharacteristicsA general purpose gypsum-based adhesive for use when using the DriLyner system to direct fix plasterboards to brick, block-work or cementicious backgrounds.
Manufacturing StandardsEuropean Standard EN 14496
Gyproc miscellaneous accessories
Gyproc beads
Product CharacteristicsA soft extruded linear intumescent gap sealer, to maintain fire resistance.
Manufacturing StandardsAmerican Standard ASTM E84British Standard BS 476 - Part 20
Gyproc Plasterboard Adhesive
237
www.gyproc.ae
Plas
ters
Product MatrixQuantity per Unit
25kg
GypFine Plasters
Product CharacteristicsGypFine - Board Skim is a high quality, formulated, gypsum based plaster for skimming pre-jointed plasterboard walls and ceilings. Dries to a white finish, for ease of final decoration.
GypFine - Multi Skim PlasterGypFine - Board Skim Plaster
Manufacturing StandardsASTM C587-04 (2009)EN 13279-1 type B1/20/2
Product MatrixQuantity per Unit
25kg
Product CharacteristicsA premium quality, formulated gypsum based finish plaster, for skimming multiple background types such as pre-levelled cementitious or gypsum based substrates and plasterboard surfaces. Dries to a white finish for ease of final decoration.
GypFine - Ultra Skim Plaster
Manufacturing StandardsASTM C587-04 (2009)EN 13279-1 type B1/20/2
Product MatrixQuantity per Unit
25kg
Product CharacteristicsGypFine - Multi Skim is a high quality, formulated, gypsum based plaster for skimming pre-levelled cementitious or gypsum based substrates. Dries to a white finish, for ease of final decoration.
Manufacturing StandardsASTM C587-04 (2009)EN 13279-1 type B1/20/2
Gyproc's GypFine smoothing plasters offer flexible solutions to a range of site needs with a range of products including GypFine – Board Skim for skimming plasterboard, GypFine – Multi Skim for skimming cement render, fair face concrete and precast panels and GypFine – Ultra Skim for skimming all surfaces without the need for primers.
Gyproc GypFine’s dedicated formulations provide quality skimming plasters for a comprehensive range of internal surfaces such as plasterboard, gypsum based plasters, cement renders, pre cast panels and fair faced concrete. These formulations enable GypFine Plasters to be used in all construction types from high rise offices and apartments to hospitals, schools or villas. They offer an enhanced level of surface uniformity and visual finish to walls and ceilings that are decorated with semi-gloss or high-gloss paints and dark colours, or as a base for wall paper and other decorative finishes. In areas exposed to artificial or critical light the finish provided is flawless.
Plasters
239
www.gyproc.ae
Acc
ess
pan
els
Product CharacteristicsA 60-minute fire rated access panel for application in walls, making access to hidden services quick and easy.
Gyproc Wall Panels comprise of a powder-coated, beaded steel frame and metal door. All panels are fitted with a budget lock as standard and are supplied with an open drive key.
Product MatrixPanel Size (mm)
300 x 300450 x 450550 x 550
Door Type
MetalMetalMetal
Weight (kg)
4.18.013.0
Door Type
Metal
Product MatrixPanel Size (mm)
550 x 550
Weight (kg)
15
Gyproc Fire Rated Access Panels (Wall) - 60 Minute
Product MatrixPanel Size (mm)
300 x 300450 x 450600 x 600300 x 300450 x 450600 x 600
Weight (kg)
4.07.810.83.36.610.0
Door Type
PlasterboardPlasterboardPlasterboardMetalMetalMetal
Product CharacteristicsA 60-minute fire rated access panel for application in walls, making access to hidden services quick and easy.
Gyproc Ceiling Panels comprise of a powder-coated, beaded steel frame with metal or gypsum board door. All panels are fitted with a budget lock as standard and are supplied with an open drive key.
Gyproc Fire Rated Access Panels (Ceiling) - 60 Minute
Product MatrixPanel Size (mm)
300 x 300450 x 450600 x 600
Weight (kg)
1.62.94.5
Door Type
PlasterboardPlasterboardPlasterboard
Product CharacteristicsNon-fire rated access panel for application in walls and ceilings, making access to hidden services quick and easy. Gyproc Standard Access Panels comprise of a powder-coated, aluminium frame and gypsum board door.
All Panels are fitted with a push catch lock and cable and hook safety mechanism. Suitable for non-fire rated system applications where no structural performance levels are specified
Gyproc Standard Access Panels ( Non Fire Rated )
Product CharacteristicsA 120-minute fire rated access panel for application in walls, making access to hidden services quick and easy.
Gyproc Wall Panels comprise of a powder-coated, beaded steel frame and metal door. All panels are fitted with a 3 point lock.
Gyproc Fire Rated Access Panels (Wall) - 120 Minute
Product MatrixPanel Size (mm)
235 x 150300 x 300
Weight (kg)
2.02.16
Door Type
PlasticPlastic
Product CharacteristicsNon-fire rated access panel for application in walls and ceilings, making access to hidden services quick and easy.
Gyproc Handi-Access Panels comprise of an injection moulded plastic frame and door.
Gyproc Handi-Access Panels
Gyproc Access Panels are purpose-designed for use in Gyproc framed systems where there is a requirement to access services for maintenance purposes. Designs are also included for use in masonry backgrounds.
Gyproc Access Panels can be specified in commercial, industrial, public and residential buildings. They are available as wall or ceiling panels, in either standard or a choice of performance options. Panels are available for use in 60 or 120 minute fire-rated constructions. The panels are available in a range of standard sizes with a choice of finishes to suit different applications and with a choice of security locks and catches.
Access panels
241
www.gyproc.ae
Gyproc’s versatile range of ceiling systems combines aesthetic and acoustic performance with the unique environmental properties of gypsum.The Gyproc ceiling range includes lay-in grid tiles, planks and seamless boarded solutions.
Activ’Air Quattro 41
Activ’Air Quattro 42
Activ’Air Quattro 43
Activ’Air Quattro 46
Activ’Air Quattro 47
Activ’Air Sixto 63
Activ’Air Sixto 65
Activ’Air Line 6
244
244
244
244
244
244
244
244
245
245
245
245
245
245
Activ’Air Quattro 20
Activ’Air Quattro 50
Activ’Air Line 4
Activ’Air Sixto 60
Activ’Air Point 11
Activ’Air Base 31
Gyptone tiles
Gyptone boards
246
246
246
Quattro 55
Line 8
Base 33
Gyptone plank
Activ’Air Curve Line 6
Activ’Air Curve Sixto 63
Activ’Air Curve Quattro 41
245
245
245
Gyptone Curve
Perforated boards, ceiling tiles and planks
Ceilings index
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s
Gyptone Trap
Quattro 20 246
Quattro 50 246
Point 11 246
Base 246
Gyptone INSTANT
Quattro 20, Edge B 247
Point 11, Edge B 247
Line 4, Edge B 247
Sixto 60, Edge B 247
Rigitone Range
6/18 248
8/18 248
10/23 248
12/25 248
15/30 248
8-12/50 248
12-20/66 249
8-15-20 Super 249
12-20-35 249
8/18Q 249
12/25Q 249
Edge details
A E15 E24
D1 E15/A Tapered
Gyproc ceiling systems create a new flexibility in design and construction. The wide range of products give fresh and creative freedom for interior designers, enabling them to fully realise the visual and acoustic ambience of their designs. The products are available in six edge profiles as shown below:
243
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s Gyptone Boards
www.gyproc.ae
Product CharacteristicsAchieves high levels of acoustic absorption with a 12mm square cut out design giving a total perforated area of 16%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2400 T/E12.5mm
Activ'Air Quattro 41 now
available with
Product CharacteristicsGood acoustic absorption with a 12mm square cut out design giving a total perforated area of 10%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2400 T/E12.5mm
Activ'Air Quattro 42 now
available with
Product MatrixWidth (mm) Length (mm) Edge Detail
900 2700 T/E12.5mm
Product CharacteristicsAchieves high levels of acoustic absorption with a 12mm cut out design giving a total perforated area of 16%.
Activ'Air Quattro 43 now
available with
Product CharacteristicsGood acoustic absorption with a 12mm square cut out design giving a total perforated area of 10%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2400 T/E12.5mm
Activ'Air Quattro 46 now
available with
Product CharacteristicsComprising 12mm square cut out design with a perforated area of 10% and offering good level of acoustic absorption.
Product MatrixWidth (mm) Length (mm) Edge Detail
900 2700 T/E12.5mm
Activ'Air Quattro 47 now
available with
Product CharacteristicsAn 12mm hexagonal perforation design giving a total perforated area of 15%. Provides good levels of acoustic absorption.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2400 T/E12.5mm
Activ'Air Sixto 63 now
available with
Product CharacteristicsA line cut out design of 6mm x 80mm giving a total perforated area of 13% and high levels of acoustic absorption.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2400 T/E12.5mm
Activ'Air Line 6 now
available with
Product CharacteristicsAn 12mm hexagonal perforation design giving a total perforated area of 17.6%. Provides good levels of acoustic absorption.
Product MatrixWidth (mm) Length (mm) Edge Detail
900 2700 T/E12.5mm
Activ'Air Sixto 65 now
available with
244
www.gyproc.ae
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s
* 10mm tiles incorporate Activ'Air as standard
Gyptone Tiles
Activ'Air Quattro 20
Product CharacteristicsPre-finished white tile with 9mm square perforations, backed by special sound absorbent tissue. A perforated area of 18% provides high levels of acoustic absorption.
Product Matrix
10*/12.5mm
now
available with
Product CharacteristicsPre-finished white tile with 12mm square perforations. Comprises a perforated area of 18%, giving a good level of acoustic absorption performance.
Product Matrix
10*/12.5mm600
Activ'Air Quattro 50 now
available with
Product CharacteristicsPre-finished white tile with 11mm hexagonal and a perforated area of 17% providing high levels of acoustic absorption.
Product Matrix
10*/12.5mm
Activ'Air Sixto 60 now
available with
Gyptone Curve Boards
Product Matrix
Activ'Air Curve Line 6 1200
1200
1200
6.5
6.5
6.5
2400
2400
2400
Width (mm)Thickness (mm) Length (mm) Edge Detail
Tapered
Tapered
Tapered
Product CharacteristicsGyptone Activ’Air Curve provides the opportunity to create curved ceilings with sound absorbing properties.
The large format also enable the possibility to create large unbroken ceiling surfaces without visible joins.
The product range for Gyptone Activ’Air Curve includes 3 perforated standard patterns – Line 6, Sixto 63 and Quattro 41, all with tapered edges on the long sides.
Used Gyptone ceilings can be fully recycled into the manufacturing of new gypsum products.
Activ'Air Curve Board Range now
available with
Activ'Air Curve Sixto 63
Activ'Air Curve Quattro 41
Product CharacteristicsPre-finished white tile with 6mm x 95mm line perforations, backed by special sound absorbent tissue. Achieves high levels of acoustic absorption from an 18% perforated area.
Product Matrix
10*/12.5mm
Activ'Air Line 4 now
available with
Product CharacteristicsPre-finished white tile with 6.5mm diameter round perforations, backed by special sound absorbent tissue. Achieves high levels of acoustic absorption from a 12% perforated area.
Product Matrix
10*/12.5mm
Width (mm)
600
Width (mm)
600
Width (mm)
600
Length (mm)
600
Length (mm)
600
Length (mm)
600
Edge Detail
D1, E15
Edge Detail
E15
Edge Detail
E15
Activ'Air Point 11 now
available with
Product CharacteristicsPre-finished white un-perforated tile. Used in conjunction with Line, Quattro, Sixto and Point tiles to create distinctive ceiling designs. Ideal for use in corridor areas.
Product Matrix
10*/12.5mm
Width (mm)
600
Width (mm)
600
Width (mm)
600
Length (mm)
Length (mm)
600
Length (mm)
600
Edge Detail
E15
Edge Detail
D1, E15
Edge Detail
E15
Activ'Air Base 31 now
available with
245
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s
www.gyproc.ae
Gyptone Plank
Product Matrix
Quattro 55300
300
300
12.5
12.5
12.5
1800, 2100, 2400
1800, 2100, 2400
1800, 2100, 2400
Width (mm)Thickness (mm) Length (mm) Edge Detail
E15/A
E15/A
E15/A
Product CharacteristicsThe product range for Gyptone Plank comprises four standard patterns based on the Line, Point, Quattro and Base pattern types. Plank has recessed long edges and is fixed to reinforced, exposed T-15 sections without hangers.
Gyptone Plank and its supporting sections can be easily demountable making it a suitable choice for corridors where easy access to installations is required.
The planks have perforations which together with acoustic backing tissue gives good acoustic properties
Gyptone Plank Range
Line 8
Base 33
Gyptone Trap
Product Matrix
Quattro 20580
580
580
580
Width (mm)
1160, 1160-1800
1160, 1160-1800
1160, 1160-1800
1160, 1160-1800
Length (mm)
Product CharacteristicsTrap is a system for hinged corridor ceilings where the tiles can be let down on the side of choice. This allows for quick and easy access to installations behind the tiles.
The product range for Gyptone Trap comprises five standard patterns: Trap Line 4, Point 11, Quattro 20, Quattro 50 and Base.
The Gyptone Trap components are supplied with the tiles mounted in frames of lacquered steel which can be let down and hung freely with the aid of special hooks. The Trap components can – with the help of the centre section – also be used in continuation of each other.
The tiles have perforations which together with the acoustic backing tissue gives good acoustic properties.
Gyptone Trap Range
Quattro 50
Point 11
Base
246
www.gyproc.ae
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
sGyptone INSTANT
Product CharacteristicsGyptone INSTANT acoustic panel solutions are designed for acoustic regulation of existing rooms where lower reverberation times and improved speech intelligibility are required. The panel is suitable for class rooms or office rooms and will reduce reverberation time and increase speech intelligibility.
Gyptone INSTANT acoustic panels are very easy to install and have a robust surface with high impact resistance. The panel comes with pre-painted frame and tiles and can be mounted on the wall in 20 minutes. They can be mounted on walls at any angle and are paintable in any colour or pattern
Gyptone INSTANT Range
Product Matrix
Quattro 20, Edge B600
600
600
600
Width (mm)
600, 2400, 3600
2400, 3600
2400, 3600
2400, 3600
Length (mm)
Point 11, Edge B
Line 4, Edge B
Sixto 60, Edge B
247
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s
www.gyproc.ae
Rigitone Boards
Product CharacteristicsAchieves high levels of acoustic absorption with 6mm regular round perforations at 18mm c/c distance giving a total perforated area of 8.7%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1188 1998
12.5mm
Rigitone 6/18
Product CharacteristicsAchieves high levels of acoustic absorption with 8mm regular round perforations at 18mm c/c distance giving a total perforated area of 15.5%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1188 1998
12.5mm
Rigitone 8/18
Product CharacteristicsAchieves high levels of acoustic absorption with 10mm regular round perforations at 23mm c/c distance giving a total perforated area of 14.8%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1196 2001
12.5mm
Rigitone 10/23
Product CharacteristicsAchieves high levels of acoustic absorption with 12mm regular round perforations at 25mm c/c distance giving a total perforated area of 18.1%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2000
12.5mm
Rigitone 12/25
Product CharacteristicsAchieves high levels of acoustic absorption with 15mm regular round perforations at 30mm c/c distance giving a total perforated area of 19.6%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2010
12.5mm
Rigitone 15/30
Product CharacteristicsAchieves high levels of acoustic absorption with 8-12mm dia. regularly staggered round perforations at 50mm c/c distance giving a total perforated area of 13.1%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2000
12.5mm
Rigitone 8-12/50
248
www.gyproc.ae
Perf
orat
ed a
cou
stic
gyp
sum
pro
duct
s
Product CharacteristicsAchieves high levels of acoustic absorption with 12 and 20mm dia. regularly staggered round perforations at 50mm c/c distance giving a total perforated area of 19.6%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1188 1980
12.5mm
Rigitone 12-20/66
Product CharacteristicsAchieves high levels of acoustic absorption with 8, 15 and 20mm dia. irregular scattered round perforations giving a total perforated area of 10%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 1960
12.5mm
Rigitone 8-15-20 Super
Product CharacteristicsAchieves high levels of acoustic absorption with 12, 20 and 35mm dia. irregular scattered round perforations giving a total perforated area of 11%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1200 2000
12.5mm
Rigitone 12-20-35
Product CharacteristicsAchieves high levels of acoustic absorption with 8mm regular square perforations at 18mm c/c distance giving a total perforated area of 19.8%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1188 1998
12.5mm
Rigitone 8/18 Q
Product CharacteristicsAchieves high levels of acoustic absorption with 12mm regular square perforations at 25mm c/c distance giving a total perforated area of 23.0%.
Product MatrixWidth (mm) Length (mm) Edge Detail
1196 2001
12.5mm
Rigitone 12/25 Q
249