professional reconstructing made of floors and walls...
TRANSCRIPT
madein
Germany
WorkTec
Striking off exterior plaster
Loosening of soft floor coveringsRemoving tiles Removal of plaster - full height of a storey without scaffolding nor bending
Detaching parquet and laminate
Removing bitumen
VOGT Basic Set for painters, plasterers, tillers...
Breaking off tiles and plates Forcing floor pavement openOpening joints in constant depth
Professional rof floors and walls
econstructing
Striking off interior, exterior, plaster surfacesBreaking off glued tiles and tiles in mortar beddingPeeling off all floor coverings and bonding materialsRemoving of coatings and filling compoundVanishing brickwork, concrete and floor pavementRemoving bitumen sheeting and insulationsReconstructing of concrete and sandstone wallsEliminating mortar rests and formwork joints
and fine
VOGT Hammer - powerful and multifunctional
WorkTec
VOGT Baugeräte GmbH
Industriestraße 39 | D-95466 Weidenberg
+49 (0) 92 78 / 774 33-0 774 33-11
[email protected] | www.vogt-tec.de
facebook.com/vogtbaugeraete
youtube.com/c/vogtbaugeraete
The advantages:Easy and fatigueless operation thanks to low weightHigh performance per squaremeter due to high power of impactEnables working on the full height of a storey without stretching nor bending Ergonomic posture by fitting hammer length
Large choice of tools and fast tool changeVarious applicationLow air consumption enables use of mobile 230 V compressors2 years warranty on equipment and tools
- the powerful one- the light one
M 100
M 200
M 200 B
M 340
M 360
M 365
M 380
GA 140 HTA 85 H GA 120 KH
V 1140 H
Tools
Striking off gypsum, lime, and lime-cement plaster, fineplasterTaking off glued tilesRemoving filling compoundsRoughening concrete and sandstoneCleaning of flat formworkGetting off formwork joints, rests ofmortar, sprayed asbestosOpening PCB- and brickwork joints
Removing all kinds of floor coverings(PVC, carpets, parquet, linoleum...)Striking off cement plasterBreaking tiles in mortar beddingRemoving bitumen sheetingDemolition workings, breakthroughsDigging in solid soil (underpinnings, house service connections...)Compacting concrete and clay
Sheet metal chiselSheet metal roofs, oil tanks
Joint chisel on rolls Joints of fair-faced brickwork
Scraper holder M 5000 with special blade Frankenklingeb = 120 mm (B 120 LF) and parquet wedge PK 90Removing PU-elastically glued parquet and laminate
Cross blade holder withcross blade (H 100 B)Detaching and cutting soft floor coverings
Delta-P knife, curvedb = 80 mmb = 100 mmParquet, laminate, bitumen,thick floor tiles, plaster, wooden floor pavement, natural stone plates
Wide chisel b= 80 mmPlaster, tiles
Wide chisel b= 60 mmPlaster, tiles
Wide chisel b= 40 mmPlaster, tiles, floor pavement
Flat chisel curved Pounding breakthroughs lateral
Flat chisel b= 25 mmBrickwork
Moil pointConcrete, sand-lime bricks
Spade chiselb= 65 mm l= 400 Loosening of solid soil
All floor coverings, glued tiles, thin plaster, epoxy resin, 2 components coatings, insulation plates, PCB-joints, rest of bitumen, bonding materials, coatings and compensating layers,concrete nosings
Hollow chiselWide joints
Scraper holder M 5000 forblades as followsb = 100 mm (B 100 S)b = 120 mm (B 120 S)b = 160 mm (B 160 S)b = 200 mm (B 200 S)
Bush hammer 7x7 teethRoughening concrete / sandstone
Tamping
plateshapes:
Compacting soil, clay, concrete
Digging spade
Loosening soil, cutting
roots
Clay spade 85/120 x 260mm
Clay, loam
Short digging spade Underpinnings,
narrow working areas
Further tools deliverable
M 5000
M 5000
M 5000
M 650
M 608 R
M 725
M 408 P
M 410 P
M 5000
S 860 HTechnical Data
for workings on the floor in upright posturee.g. vanishing floor coverings, bitumen sheetings
for workings on the floor, steeper anglee.g. epoxy resin, ceiling plaster
for workings at the walle.g. plaster, full height of a storey
for scaffoldings, bathrooms
e.g. tiles, plaster, coatings
25-70
70 cm
3,2 kg
30-70
70 cm
3,5 kg
50-70.18
70 cm
4,6 kg
60-70
70 cm
5,2 kg
.18
25-110
110 cm
3,8 kg
30-110
110 cm
4,1 kg
50-110
110 cm
5,4 kg
.18
60-110
110 cm
6,0 kg
.18
25-90
90 cm
3,5 kg
30-90
90 cm
3,8 kg
50-90
90 cm
5,0 kg
.18
60-90
90 cm
5,6 kg
.18
25-130
130 cm
4,1 kg
30-130
130 cm
4,4 kg
50-130
130 cm
5,8 kg
.18
60-130
130 cm
6,4 kg
.18
VOGT Hammer VH 25
VOGT Hammer VH 30
VOGT Hammer VH 50.18
VOGT Hammer VH 60.18
3200/min190 l/min / 6,0 bar
3,0 - 6,0 bar
3200/min190 l/min / 6,0 bar
3,0 - 6,0 bar
3200/min190 l/min / 6,0 bar
3,0 - 6,0 bar
3200/min190 l/min / 6,0 bar
3,0 - 6,0 bar
low
vib
rati
on
low
vib
rati
on
Model
Total Length
Weight
Model
Total Length
Weight
Model
Total Length
Weight
Model
Total Length
Weight
Operating pressurePercussion rateAir consumption
Operating pressurePercussion rateAir consumption
Operating pressurePercussion rateAir consumption
Operating pressurePercussion rateAir consumption
H 25 H 50.18H 30 H 60.18/ /
low vibration
Subject to change 04/2016 © VOGT Baugeräte GmbH