professor shamsuddin bin sulaiman. phd · 4. muhammad yusuf (gs22333) cutting parameter...
TRANSCRIPT
Page 1/62
1. Educational Background 1989 – 1991 University of Wales, Swansea, United Kingdom PhD in Mechanical Engineering Thermal and Flow Analysis of Casting Process: Numerical Simulation and Experimental
Works (Areas of interest: Casting Technology, Metal Forming, Composite Material and Automation)
1987 – 1988 Univeristy of Wales, Swansea, United Kingdom Master of Science (Design and Economic Manufacture)
1982-1986 Universiti Putra Malaysia Bachelor of Engineering (Agricultural) 2. Previous Academic and Other Relevant Appointments
Date
Appointment
Sept 2007-to date Professor Dept. of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia
1July 2011- Jun 2014 Senate Member Universiti Putra Malaysia
April 2008-March 2011 Deputy Dean School of Graduate Studies Universiti Putra Malaysia
PROFESSOR SHAMSUDDIN BIN SULAIMAN. PhD Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA Specialisation: Manufacturing Engineering, Metal Composite Materials
and Casting Technology
Staff card Number: A01312 IC Number: 630104-01-6127 Tel: 603- 89466334 Fax: 603- 86567122 Mob: 6016-2276215 email: [email protected] website:http://www.eng.upm.edu.my Scopus: https://www.scopus.com/authid/detail.url?authorId=12647225400 H-Index: 11
Page 2/62
Sept 2003-Aug 2006 Deputy Dean Faculty of Engineering Universiti Putra Malaysia
Feb. 2001 – Nov 2001 Deputy Director University Research Park/Taman Penyelidikan Universiti (TPU) Universiti Putra Malaysia
August 1998-August 2007
Associate Professor Dept. of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
April’99-Oct’99 College Master/Pengetua Kolej Tun Perak Universiti Putra Malaysia
Jan 1995-August 1998 Head Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
3. Teaching and Supervision
a. Teaching Courses
Code Course Name Institution
KMP 3001/EMM3701 Manufacturing Process I UPM
KMP 3003/EMM3702 Manufacturing Process II UPM
EMM 3008 Powder Metallurgy UPM
KMP 3005 Tool Engineering UPM
EMM 3807 Machine Tool Technology UPM
KMP 3803 Automation II UPM
KMP3508 Robot Dynamic UPM
KS311 Fluid Mechanics 1 UPM
KS 353 Material Engineering UPM
KS 373 Fabrication and Production UPM
KMP 5001/EMM5701 Advanced manufacturing Processes UPM
EMM 5708 Automation and Robotics UPM
EMM5602 Total Quality Management UPM
EMM 5616 Maintenance Management UPM
KCEP 3302 Tools Engineering (Mould and Die) UM
b. Supervision of Students
Level
Graduated / Completed On-going
Chairman/ Supervisor
Committee/ Co-Supervisor
Chairman/ Supervisor
Committee/ Co-Supervisor
PhD 13 18 9 11
MSc 20 16 0 7
Page 3/62
MEng 77 - 9 -
BEng 74 - 3 -
PhD Completed (Supervisor) No. Name Thesis Title
Year
Graduated
1. Rosmamuhamadani bin Ramli (GS34430)
Characterization and mechanical properties of in-situ titanium diboride fibre reinforced aluminium copper alloy composites
2016
2. Jamshid Nemati GS28431
Mechanical properties of ultra-fine grain Aluminium Al6063 and pure copper processed by equal channel angular extrusion method
2015
3. Hani Mizhir GS29903
Improvement of the Mechanical Properties of Aluminium Alloys and Composite Extruded parts
2015
4. Nanang Fatchurohman GS26836
Manufacturing process and material selection using modified multi criteria decision making for brake disc
2014
5. Azhar Abdullah GS19228 Mechanical properties of Tin Mine tailing sand for greensand casting mould
2013
6. Taufik Saroni GS22022 Development of non-linear thermal expansion model for casted Aluminium Silicon Carbide
2012
7. M.Sayuti GS20480 Properties of Titanium carbide reinforced aluminium silicon alloy matrix
2012
8. Daryoush Safarzadeh GS18284
Design an development of a self-propelled hydraulic floor crane
2012
9. Mohamed A.Abdulmawlla Jolgaf GS16483
Optimization of closed die forging process 2011
10. Elfetori F. Abdewi GS13364
Design of composite tube subjected to quasi-static and dynamic impact loadings
2007
11. Thoguluva Raghavan Vijayaram GS13402
Properties of Metal matrix Composite of Aluminium – 11.8% Silicon Reinforced with different particulates
2006
12. Lim Ying Pio GS11777 Effects of grain refinement on the cooling rate, and microstructural and mechanical properties of Al-Si sand casting
2006
13. Rosnah Mohd Yusof Implementation of Advanced Manufacturing Technologies (AMTs) in the Small and Medium Scale Industries (SMIs) of Malaysia
2002
PhD Completed (Co-Supervisor)
Page 4/62
No. Name Thesis Title
Year Graduated
1. Mohd Uzair bin Mohd Rosli (GS30204)
Development of value added engineering concept generation for automotive parts
2015
2. Shahla paslar (GS31529) Development of hybrid dynamic scheduling model for flexible manufacturing system
2015
3. Mohd Azaman Md Deros (GS32933)
Development of Thin wall natural Fibre Composite 2015
4. Muhammad Yusuf (GS22333)
Cutting parameter optimization for aluminium LM6 composite using design of experiment method
2013
5. Amer Najat Najmaldeen Kakahy (GS28436)
Design and development of an integrated slasher (Pulverzer) fro sweet potato harvester
2013
6. Mohammad Reza Shahrak (iGS18304)
Industrial Engineering 2012
7. Ali Hashemi (GS21422) Agricultural Machine design
2012
8. Mohammed Shu'aibu Abubakar (GS21830)
Machine Design 2012
9. Mehrdad Nikbakht Eliaderany (GS21374)
Supply chain Management in Oil Industry 2012
10. Fatai Bukola Akande (GS21068)
Motion resistance analyses of towed narrow wheels 2011
11. M.Akhir (GS15631) Development of Sweet potato harvester
2011
12. Mohammadreza Vasili (GS18909)
Development of load shuffling and travel time model for miniload sutomated storage and retrieval system with open-rack structure temperature for turning operations.
2011
13. Gholamreza Ismailian (GS17989)
Line Balancing of Production line. 2010
14. Suditama (GS05827) Analysis of Thermal Storage Material and Heat Transfer Characteristics
2008
15. Fayiz Yousef Mahmoud Abu Khadra (GS12543)
Metamodelling Technique of metal forming process 2006
16. C.K. Ooi (GS02448) Improving Flexibility in Manufacturing using a Family Ordering System for long lead time components
2005
17. Elnougomi Abd. Elgadir Omer
Design, Fabrication and Performance Test of a Peanut Harvesting Machine
2000
18. Tang Sai Hong Rapid Prototyping using a Precision Robotic Manipulator
2000
19. Faizal Amri The performance of a disk plow combined with a 1997
Page 5/62
rotary blade in wet soil
PhD Progress (Supervisor)
No. Name Thesis Title
Expected Year to be
Graduated
1. Subramaniasarma a/l Sreenivasan (GS31060)
BMC Kenaf Reinforced Polymer 2016
2. Ishak Mohmad Ali (GS32496)
Mechanical Properties of Propeller by vibration casting
2016
3. Zolkarnain bin Marjom (GS41838)
Composite Casting Technology 2018
4. Almukhtar. Ib. A. Aljermi. (GS42636)
Casting: Improvement of Al Cu Composite 2018
5. Zatil Aqmar binti Zulkifli (GS40943)
Wettability in Casting Process 2018
6. Ahmaad Kadmouse Aldeehani (GS43396)
Integrated maintenance management in Sport Facility
2019
7. Abdullah M S M Aladwan (GS43398)
Integrated maintenance management in Halal Food 2019
8. Hamid Nahidi (GS43646)
Metal Matrix Composite 2018
PhD Progress (Co-Supervisor)
No. Name of Students and Title of Thesis/Project
Thesis Title
Year Expected to be
Graduated
1. Mohamed Serdah M
(GS37298) Variable Valve Timing Optimization by Using Electromagnetic Solenoid in the Engine
2016
2. Teo Hiu Hong (GS31074) Industrial Engineering
2017
3. Jethesh Prabhakaran (GS31899)
Manufacturing System Engineering 2018
4. Mehran Tamjidy (GS35754)
Industrial Managemnt system 2018
5. Mageswaran a/l Arunasalam (GS36238)
Manufacturing Engineering 2018
6. Khairul Nizam Md Tohit (GS35798)
Industrial Management System 2018
7. Bala Gambo Jahun (GS37351)
Design and Fabrication of combined harvester 2017
Page 6/62
8. Bt Iskandar Zulkarnain
bin Baharudin (GS37694)
Manufacturing system Engineering 2018
9. Mohd Shahrizan bin Yusoff (GS38448)
Lean Engineering in Automotive Industry 2017
10. Qasim Mhalhal Azpen (GS39560)
Production system in Manufacturing Industry 2018
Master of Science Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Mona Kiaee (GS22043) Development of Squeeze casting
2015
2. Hafizal Abu Bakar (GS12123)
Design and Fabrication of three component balance of wind tunnel
2012
3. Suraya Sulaiman (GS22223)
Metal flow and solidification of casting process 2011
4. Nanang Fatchurohman (GS19360)
Molten metal flow and solidification of casting process 2010
5. Mostafa Badakshan (GS18160)
Optimization of simultaneous scheduling for machines and automated guided vehicles using fuzzy genetic algorithm
2009
6. Ehsaanreza Bagherian (GS 19723),
Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes
2009
7. Poria Matoorian (GS16823)
Development of Super Alloy machining 2008
8. Khairul Nizam Md. Tohit (GS13383)
Improvement of accuracy level of automotive front fender shield assembly using process failure mode and effect analysis and control plan techniques.
2006
9. M. Sayuti (GS12364) Mechanical properties and characterization studies on the ascast quartz particulate reinforced LM6 alloy matrix composites
2006
10. Wong Choon Tat Design and fabrication of plastic injection mould
2004
11. Kader Ibrahim Ab. Wahab
Wafers fabrication of bipolar transistor 2003
12. Mohamad Irwan Yahaya
Reverse Engineering of free-form surfaces 2003
13. Edi Sham Zainudin
Numerical Invesigation of Fibre Reinforced Polymer 2002
14. Azman Senin Optimisation of machining parameters in Wire 2002
Page 7/62
Cutting Process for Cooling Jig
15. Mohd. Razali Samin Robot Manipulation Tracjectory Planning in Complex Position
2002
16. Mohd Khairol Anuar bin Mohd Ariffin
Design, Fabrication and Analysis of Plasting Injection Moulding Mould
2001
17. Alex Lim Kheng Hooi Thermal Analysis of Two and Three-gate Sand Casting Mould
2001
18. Elfetori F. Abdewi Using FEM in Optimisation of Die Casting Design
1999
19. Md Samsul Abedin Computer Aided Engineering in diecasting design
1997
20. Ng Yu Ting Development of Auto Wire Bonder Expert System
1997
Master Completed (Co-Supervisor)
No. Name Thesis Title
Year Graduated
1. Hamdan Yahya Ahmed Al-Ruhaimi (GS27013)
Automated approach for oil palm in vitro shoot sorting
2014
2. Seyed Ehfarzaneh Nojabaei (GS26533)
Development of priority oriented scheduling method to increase the efficiency and reliability of manufacturing system
2009
3. Mohd Fauzi Hashim Rigid Plastics FEA in metal forming processes
2007
4. Mohandas a/l Krisnan Design and development of labour productivity monitoring system in manufacturing
2007
5. Sharifah Imihezri Syed Shaharudin (GS12124)
Clutch pedal design and fabrication for Injection moulding for polyamide-based short fibre reinforced composite
2005
6. Lee Hoo Boon Rapid Prototyping system of composite material products
2003
7. Pitoon Nopnakorn Development of 2D CAD software based on ISO technical drawing standard
2003
8. A.K.M.Parves Iqbal Development of an intelligent painter robot using Cartesian coordinate approach for construction industry
2002
9. Tan Chee Fai Development of hole recognition system using rule-based technique
2001
10. Mohd Ahadlin Mohd Daud
The Evaluation of Mechinablity and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machine
2001
11. Ten Seng Teik Emulation of the Space Robotics System on Earth
2001
Page 8/62
12. Mohamed A.Abdulmawlla
CAD/CAM system for closed die forging Process 2000
13. Elsadiq Mahdi Ahmed Saad
Design and Fabricate filament winding machine and analysis of cotton/epoxy and pandanus/epoxy
1997
14. Mohabatul Zaman Bukhari
Development of no-clean solder for Radio Frequency power module
1996
15. Shafina Sultana Simulation-based analysis of kinematics, dynamics and control of space robots
1995
16. Wan Tarmeze Wan Ariffin
Strength and Stiffness of joints in rattan furniture 1994
Master Completed (Supervisor – Without thesis)
No. Name Thesis Title
Year Graduated
1. Mohd Kamarul Nizam bin Mahmood
Effect of Post Weld Heat Treatment Microstrcuture and Mechanical Properties of Carbon Steel Plate
2015
2. Amjad Ashor Mohamad The Effect of Air Bleed on Jet Engine Performance
2015
3. Khairil Amri bin Kamaruzzaman
Impact of Corrosion Coatings on Exposed Structures
2015
4. Ahmed Ali M. Khan Total Quality Management in Industry
2015
5. Kong Yoke Yoon
A Study of Quality Control as a Competitive Tool for Small Scale Enterprises in Selangor
2015
6. Mohd Shafei San Design and fabrication of food automated system
2014
7. Ismi Aishah Ishak Service Quality/Management Engineering
2014
8. Ili Marini Zainal Abidin Implementing Lean Six Sigma For Process Improvement
2014
9. Masni Ahmad Basri Service Management in MAS
2014
10. Halimaton Nabilah Mohd Husin
Total Quality Management in Food Industry 2014
11. Rami Abdulhakeem
Maintenance Management in SME 2014
12. Mohamad Juraidi Jamal Natural composite material
2014
13. Mohamad Shahidan Machine maintenance
2014
14. Noor Diyana Dahlan Plastic Injection Mould
2014
15. Rosidah Mohd Norsat Computational Analysis in Manufacturing Process
2014
16. Marwan Mat Salleh Analysis of Used Polytops From Schools in Malaysia 2014
Page 9/62
17. Joshua Raj Solar Powered Car Ventilation System
2014
18. Mohd Norhan GS33725
E-Procurement Integration:Impediment Face by Malaysia's Automakers Vendors
2013
19. Safwan Azizi GS34652
Design of Plastic Injection Mould for thick wall product
2013
20. Mohd Firdaus Dzulkafli GS32797
Maintenance Strategy Application in Industry
2013
21. Zatil Hafila Kamaruddin GS33602
Metal Casting Process 2013
22. Emeyusrezal Daud GS34894
The Development of Green Tech in Aotumotive Industry in Malaysia-Development Green Vehicle in Proton
2013
23. Zatil Hazrati Kamaruddin GS33609
Fabrication of Skid Tank
2013
24. Zulkefli Ismail GS34381
Hot Rolled Coil at The Steel Making Plant -The Quality Problems
2013
25. Nazarul Abidin GS32796
Failure Analysis in Manufacturing Machinery / CAD CAM
2013
26. Nasuha Menhat GS32649
Smartphone features among UPM students 2013
27. Nur Atiqah Nik Shamsudin GS32658
Smartphone usage and the implecations among UPM’s students
2013
28. Noor Syarida Abdul Rahman GS32912
Students satisfaction towards service quality of front counter staff in private university
2013
29. Lim Ying Shing GS33076
Brand switching behavior over laptop brands among UPM students
2013
30. Saeid Pourseifaddini GS31290
An approach to long-term recovery procedure as part of local disaster recovery management: A study on earthquakes Zarand, Iran 2005.
2013
31. Alireza Rashidi GS33180
Application of value stream mapping in the furniture company
2013
32. Ong Yu Lee GS33061
Development of a program to calculate plastic material property for non linear FE Analysis
2013
33. Esadig Abdalla Mohammed Bushara GS31345
Fast moving consumer goods productivity improvement
2012
Page 10/62
34. Seyed Sattar Emamian GS30919
Failure Analysis of Welding process
2012
35. Nurul Zanariah Kolan GS31467
Maintenance IT equipment in training institute in Malaysia
2012
36. Mirmani Mehrbakhsh GS29222
casting in jewellery (loss wax investment casting)
2012
37. Amir Sayah Roshan Zamir GS31916
FEA in pressure vessel 2012
38. Farbod Redaei GS29281
Construction project management
2012
39. Sorosh Borozjani GS31299
FEA and improving wind turbine
2012
40. Hamed Niakan GS31711
Supply chain management
2012
41. Murugiah Sivasubramaniam
Back surface scribe ID for 200mm wafer fabrication 2011
42. Megat Mohd Amzari Megat Mohd Aris
Analysis of 2-stroke small engine emission system 2011
43. Firdaus Mohamed Sahid Chips formation and tool wear characteristics of turning operation
2011
44. Syarina Sharuddin
Analysis of plastic Injection moulding process 2011
45. Ishak Mohamad Ali
Integrated Fluid Parametric Analyser 2010
46. Zaidil Abdilla Ahmad Salehuddin
Project management of boat building and repair 2010
47. Noorhazilah Baharin Risk management – irrigation project using pressurized piping system
2010
48. Subramaniasarma a/l Sreenivasan
Simulation of thermoset manufacturing process 2010
49. Muhamad Hasnulhadi Mohamad Jaafar
Optimization of cutting parameter of tungsten carbide tool life turning process
2010
50. Safari Hj Mat Desa Project management in hatchery rainfall building system
2010
51. Zailani Zainal Abidin
Solid lubricant in machining process 2010
52. Nazrol Hj Mait
Comparison of dies to produce similar products 2010
53. Shamsuddin Man
Process parameter for rectangular deep drawing
54. Mohd Zairulnizam Mohd Zawawi
Analysis of an injection moulding parts using MoldFlow (feed system)
2010
55. Roslan Mohamad Sharip Design of single cavity hot runner mould for juice 2010
Page 11/62
cup 56. Farah Zaheeda
Kamaruddin
Diecasting Finishing surface 2010
57. Mahsa Hosseini Risk based maintenance in Unit 4 Steam Generator of Bandar Abbas Power Plant
2010
58. Syahrunizam Buyamin
Inventory Management System 2010
59. Sohaimi Pawanchi Improvement of CAD/CAM CNC process of gasing production
60. Kaveh Faghihi Customer Knowledge Management
2010
61. Abdalsalam I. Fadeel Development hybrid software between visual basic and CAD/CAM for gasing
2010
62. Ahmed Osman Ahmed Babkir
Failure and successful strategic management in business Control and automation of manufacturing system
2010
63. Umar Ali Umar RFID: Control and automation of manufacturing system
2009
64. Mah Way Sheng Quality Management system
2009
65. Ahmad Rosli Abdul Manap
Design of PIM for gasing 2009
66. Zakaria A.Razak Study of 3D mouldflow analysis for plastic spinning top (gasing)
2009
67. Mohamad Oukal Alghali Fundamental characteristics of metal flow in casting mould of aluminium alloys
2008
68. Ahmed Alabedelah Design and development of Keyboardless Book-Style Notebook
2008
69. Mohd. Afandi Six Sigma project of Moulding Defect Reduction
2008
70. Mohammed Omran Wafi
Wettability of MMC 2007
71. Tarek Marwan Development of SiC reinforced MMC
2007
72. Zan Zainudin Die design and fabrication
2007
73. Amizi Noor Job-shop sequencing for small press shop
2007
74. Adel Abulgasm Lahimer Automated system of a Composite product fabrication
2007
75. Yuslan Yasok Design and development of press tool die for sheet metal product
2006
76. Azmi Harun Design and Analysis of mould for Plastic Injection Moulding
2006
77. Nur Elya Total Quality management in Perodua 2005
Page 12/62
Bachelor Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Syed Zaki Ahmed Improvement of metal properties by vibration casting technology
2015
2. Mohammad Afeef RP of polymer based Tops (Gasing)
2015
3. Mustika Ayu Muayanti Design and fabrication of rope machine
2014
4. Mohammad Zafirul Haris
Rice hush reinforced polypropylene composites 2014
5. Shanmugaprian Rajasagaran
Design and Fabrication of sundial 2013
6. Mohamad Asyraf Yusof Fabrication of plastic injection mould
2013
7. Shawali Mechanical properties of Aluminium extruded parts
2012
8. Firdaus Sand mould vibrator
2012
9. Faiz Design and improvement of fuel furnace
2012
10. Kamrul Design and fabrication of fuel furnace 1
2011
11. Azedi Design and fabrication of fuel furnace 2
2011
12. Mohammad Fathullah Proton parts analysis
2010
13. Khairil Hazri Analysis and improvement of proton brake system 1
2010
14. Firdaus Lokman Al Hakim
Analysis and improvement of proton brake system 2
2010
15. Mohd Affindy Application of CAD/CAM in Spinning top (gasing) production
2009
16. Mohd Sharil Production of thermoplastic spinning tops (gasing)
2009
17. Erdy Herwan Design and fabrication of ropes (for spinning tops) machine
2009
18. Mohd Nasrol Design and fabrication of spinning tops (gasing) machine
2009
19. Radha Krishnan a/l Ponnan
Manufacturing of composite corrugated tubes 2008
20. Logeswaran a/l Kuppusamy
Core and pattern making of castings 2008
Page 13/62
21. Fatin Suhana Mohd Ali
Metal flow and solidification of casting process 2008
22. Muhammad Firdaus Hamad
Characteristics of Green sand casting 2007
23. Mohd Azril Affindi Development of Squeeze casting products
2007
24. Karthik Poobalan Squeeze Casting process
2006
25. Weldaud Tulus Fabrication of composite products
2006
26. Lee Chee How Thermal Analysis of Casting process
2006
27. Ardy Affendy Squeeze casting for MMC
2006
28. Loo Boon Kian Experimental studies on bullet-proof vest (Kevlar) with different stitching patterns
2005
29. Mohd Nazarudin Amir Kajian pembentukan vortex dalam pengacuan cecair komposit matrik logam (Study of vortex development in stirring of metal matrix composite)
2005
30. Ilani Yaacob Experimental investigation of 3-Component Balance
2004
31. Harliza Mohd Yusof Fan system of Wind Tunnel
2004
32. Ahmad Mortaza Pattern making using CAD/CAM system
2004
33. Afdiman Anuar Mechanical engineering services in construction industry
2003
34. Mohd Nadzru Abd. Rahman
Development of casting software
2003
35. Mohd Aatif Ali Mokhtar Development of emergency tube for motorcycles 1
2003
36. Mohd Rizal Adnan Development of emergency tube for motorcycles 2
2003
37. Md. Shahril Mohamad Ambia
Kajian Keupayaan relau induksi di Makmal Foundri, (Study of Induction Furnace Performance II)
2002
38. Yusman Suratman Kajian Keupayaan relau induksi di Makmal Foundri (Study of Induction Furnace Performance 1)
2002
39. Hazarudyn Syah Halim Development of three components balance for wind tunnel 1
2002
40. Mohd Aznor Lamat Development of three components balance for wind tunnel 2
2002
41. Khairul Arif Ahmad Mahir
Development of sand casting process 2002
42. Mohamad Zamri Jahaya Emergency Tube System for Motocycles
2001
43. Leong Yew Boon Software Development of Flow Analysis of Casting
2001
Page 14/62
44. Hafizal Abu Bakar Design and Fabrication of Wind Tunnel Instrumentation
2001
45. Liom Hong Seng Software Development of Thermal Analysis of Casting
2001
46. Muhammad Faizal Johan Analisa Aliran Proses Acuan Suntikan Plastik (Analysis of process flow in Plastic Injection Moulding)
2000
47. Tan Chen Loon Eksperimentasi Analisa Haba Dalam Proses Penuangan Pasir (Experimental analysis of heat transfer in sand casting process)
2000
48. Lai Tze Siung Thermal Analysis of Sand Casting
2000
49. Goh Chin Hoi Design and Fabrication of Plastic Injection Mould I
2000
50. Chong Joo Kwong Design and Fabrication of Plastic Injection Mould II
2000
51. Liew Chee Kin Runner system in Plastic Injection Moulding
1999
52. Lim Wei Siang CAD/CAM application in Plastic Injection Moulding 1
1999
53. Mohd Khudzairi Hj Razali CAD/CAM application in Plastic Injection Moulding 2
1999
54. Shahid Sham Md Nor Product development in Plastic injection moulding 1
1999
55. Azaham Mohd Razali Product development in Plastic injection moulding 2
1999
56. Hassan Fahmi Miskam Molten metal flow in casting process
1999
57. Amirudin Abdul Aziz Thermal analysis of sand casting
1999
58. Md. Fauzi Ismail A study on successful certification of ISO 9000 for Manufacturing Companies
1998
59. Mohd Badli Hj Ibrahim Experimental preparation of thermal study in sand casting process
1998
60. Irwan Mohd Amir Design and fabrication of mould for plastic injection moulding 1
1998
61. Yusri Yusoff Design and fabrication of mould for plastic injection moulding 2
1998
62. Aminuddin Abd. Aziz CAD/CAM application in mould making
1998
63. Alias Ahmad An application of robot and conveyor belt for automated handling system
1998
64. Safry Matnor Design, Fabrication and Testing of a weather strip machine
1997
65. Majid Yahya Development of CAD/CAM of casting process
1997
66. Mohd Arifin Samingun Mould testing and investigation of flow characteristics of injection moulding machine
1997
Page 15/62
67. Chin Yong Keong Design and Development of an automated orientation detection system with robot arm and Programmable Logic Control integration
1996
68. Wan Shaifuddin Wan Hashim
Analisa terma pemejalan dalam proses penuangan (Thermal analysis of solidification in casting process)
1996
69. Daniel Sahari Rekabentuk dan pembinaan acuan mesin pengacuan suntikan plastik (Design and fabrication of a mould for plastic injection moulding machine)
1996
70. Abdul Razak Jaafar Analisa aliran logam dan perbandingan dengan eksperimen (Metal flow analysis and comparison with experimental results)
1996
71. Ahmad Rashidi Sabudin Kajian aliran plastik dalam mesin pengacuan suntikan (Study of plastic flow in plastic injection moulding machine)
1995
72. Tang Sai Hong Gating system design in sand casting
1995
73. Tham Chee Keen Computer aided fluid flow analysis of the filling of casting system
1994
74. Saravanan s/o Manickam Analysis of molten metal flow in the feeding system of pressure diecasting
1993
4. Research, Consultancy and Publication
a. Grant
Total Accumulated Funding: RM4,396,247
No Duration Title Funding Amount(RM) Designation
1 Nov 2015-Oct 2017
In-situ Titanium Diboride (TiB2) reinforced by Aluminium Alloy hybrid Metal matrix composites
FRGS RM104,000 PI
2 2014-2015 Mathematical Modelling of Flow and Heat Transfer for Casted Aluminium Silicon Carbide
Research Acculturation Collaborative Effort (RACE)
RM70,000 PI
3 June 2013-Oct 2015
Characterization and development of natural fibre reinforced unsaturated polyester based injection moulding composite material for electrical insulation application
FRGS RM90,500 PI
4 Feb 2011-Dec 2013
Investigation on the tailing sand (pasir bekas lombong) from ex-tin mines in Peninsular Malaysia dor use in making green sand casting mould
FRGS RM52,000 PI
Page 16/62
5 March 2011-Dec 2013
Mecahnical properties of MMC LM6 reinforced titanium carbide using Mechanical vibration mould sand casting.
UPM RUGS RM134,500 PI
6 Oct 2010-June 2013
Aluminium alloy properties improvement in extrusion process
UPM RUGS RM150,000 PI
7 Nov 2007- Oct 2009
Analysis of molten metal, solidification and the effect of vibration of metal matrix composite (MMC) materials in casting process
FRGS RM114,500 PI
8 Oct 2007- Sept 2009
Manufacturing of metal matrix composite by squeeze casting technology for automotive applications
Sciencefund RM154,400 PI
9 July 2007- Jun 2009
Metal flow and Solidification of Casting Process
UPM RUGS RM70,000 PI
10 April 2007-March 2010
Microstructure and mechanical properties of squeeze cast A356 Al-Si alloy inoculated with TiC
ScienceFund RM92,498 PI
11 March 2004- Oct 2005
Study of Lift and Drag Forces of Aerodynamic Shapes in the Low Speed Wind Tunnel
UPM RUGS RM50,000 PI
12 Jan 2002-Dec 2006
Development and Analysis of Casting Product using Network Method of Flow and Solidification Process
IRPA Experimental Applied Research
RM168,000 PI
13 Jun 2002-Jun 2003
Design and Fabrication of Three-Component Balance of Wind Tunnel.
UPM Short Term Research Project
RM15,000 PI
14 Jun 1999- Jun 2000
Design and Fabrication Wind Tunnel Instrumentation
UPM Short Term Research Project
RM10,000 PI
15 Jun 1999- Jun 2000
Design and Fabrication of Plastic Injection Mould
UPM Short Term Research Project
RM15,000 Pi
16 August 1995- Jan 1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources of Malaysia
RM159,471 PI
17 1996-2000 Finite Element Modelling of Casting Process
IRPA -MOSTI RM268,000 PI
18 Oct 1995-March 1996
Pre-stressed Fabrication Process for Filament Winding Tubes
University of Akron and Asian Development Bank
US15,000 PI
Page 17/62
19 1991-1995 Finite Element Analysis for Stress, Thermofluid and Vibrations
IRPA-MOSTI RM550,000 PI
20 2014-2016 Parameters Optimization For Machining CFRP-Aluminum Composite Laminates
Science Fund (MOSTI)
151,000 Co
21 2012-2014 Development of an integrated Value Added Engineering methodology for Automotive Parts
FRGS 68,000 Co
22 July 2007-Jun 2009
Development of Combinatorial Optimisation for Cutting tool path strategy
UPM RUGS RM70,000 Co
23 2010-2012 Development of a Novel Evolutionary Algorithms for AGV Dynamic Routing In FMS Environment
RUGS 55,000 Co
24 2009-2011 Value Engineering link-up with university program Proton saga
PROTON 30,298 Co
25 2007-2009 Development of Combinatorial Optimisation for Cutting tool path strategy
RUGS 70,000 Co
26 2007-2009 Cutting Tool Path Optimisation Using Evolutionary Algorithm
FRGS 100,000 Co
27 2007-2008 Simulation of Cutting Tool Path Strategy for Thin Walled Section Part
NLSG (UPM) 10,000 Co
28 2007-2009 Analysis of flow and solidification of casting process
RUGS 83,000 Co
29 2002-2006 Damage Management of Sheet metal Forming Using Virtual Manufacturing
IRPA - MOSTI RM168,000 Co
30 2002-2006 Development of Artificial Intelligent (AI) Based Expert System for Optimum Turning Process
IRPA - MOSTI RM164,000 Co
31 2002-2006 Concurrent Engineering Manufacturing System of Polymeric – Based Composite Automotive Pedal Box
IRPA - MOSTI RM99,080 Co
32 1991-1995 Computer Integrated Manufacturing (CIM)
IRPA - MOSTI RM1,000,000 Co
b. Fellowship / Travel Grant
Page 18/62
No Duration Title Funding Type Designation
1 Jan 1994-April 1994
Research attachement with Beijing Univesity
UNESCO (USD 20,000)
Travel and other expenditure
Researcher
2 March 1995-May 1995
Research Attachment with Swansea University and Casting Industry
Asian Development Bank (USD15,000)
Travel and other expenditure
Researcher
3 Oct 1995-March 1996
Research Attachemnt with Akron University, Ohio USA
Asian Development Bank (USD25,000)
Travel, research and other expenditure
Researcher
c. Consultancy
No Duration Title Funding Designation
1 2015-2017
Reference Module of Material Science and Enginineeirng
Elsevier Editor/Reviewer
2 2012-2014
Kuantan (Master of Manufacturing System Engineering)
Kuantan Program Expert (Teaching Courses – Advanced Manufacturing Process and Technology and Automation and Robotic)
3 2012-2014
Kuwait (Master of Engineering Program)
Kuwait Program Expert (Teaching Course – Automation and Robotic and Total Quality Management)
4 2002-2014
Evaluation of final exam paper of INTI
INTI University Expert (Engineerring Courses)
5 2010 Engineering Design Course
UPM Education & Training Sdn. Bhd.
Expert (Teaching Courses)
6 1999-2004
Mould and Die Technology German Malaysia Institute
External Verification of the student Project
7 2002 Study of the pump characteristics and performance
PEDECO Management Sdn Bhd
Head (Research Contract)
8 1994-1998
Development of Engineering Curriculum for MSc in Manufacturing Systems Engineering
MOTOROLA Seremban
Expert (Curriculum and Engineering Courses)
9 1995-1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources, Malaysia
Head (Research Contract)
Page 19/62
d. Patent/ Copyright/ Trademark
No Detail
Registration No Year
1 A self-propelled hydraulic floor crane
PI2012001330 2012
2 Plastic Made Gasing Top
PI2012000680 (Malaysia) 2012
3 Apparatus for producing Corrugated Composite Structure and method for making the same
PI 20063841 2006
e. Publications
SCOPUS ID: 12647225400
H-index:11
Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy
1 M.S.J. Hashmi and S.Sulaiman, Material Application, Performance and Life Cycle. In Reference Module on Materials Science and Materials Engineering: Elsevier Ltd, Dec 2015.
2 S. Sulaiman and S.Emamian, Optimum Speed of Friction Stir Welding on 304L Stainless Steel by Finite Element Method. In Comprehensive Materials Processing; Bayraktar, E., Ed.; Elsevier Ltd., 2014; Vol. 6, pp 227–236.
3 M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites, Composites and their properties, Chapter 18, InTech Pub. (2012)
4 Daryoush Safarzadeh and Shamsuddin Sulaiman, “Self-Propelled Hydraulic Floor Crane – Design, Development and Manufacturing”, LAMBERT Academic Publishing, Saarbrucken Germany 2012. ISBN: 978-3-659-18991-3
5 M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012), Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites, Composites and Their Properties, Intech, 978-953-51-0711-8
6 A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 1, SIRIM Press, 1998
7 A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 2, SIRIM Press, 1998
8 Shahnor Basri, Shamsuddin Sulaiman, A. Rahim Md. Amin, “Sistem Pengeluaran - Satu Pengenalan (Production System - An Introduction)”, Book published by Dept. of Mechanical and Systems Engineering UPM 1987
Citation Index/Refereed Journals
Journals
1 J. Nemati, G.H.Majzoobi, S. Sulaiman, B.T.H.T.Baharudin, and M.A.Azmah Hanim, “Effect of equal channel angular extrusion in Al-6063 bending fatique characteristics”,Int. Journal of Minerals, Metallurgy and Materials, April 2015, Vol 22, Issue 4, pp 395-404.
Page 20/62
2 J. Nemati, G.H.Majzoobi, J.Pipelzadeh and S. Sulaiman, “Characterization of mechanical properties of Al-6063 deformed by ECAE”, Int. Journal of Advanced manufacturing Technology, (in press).
3 H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Enhancement and improvement of the mechanical properties of aluminium extruded products by mathematical analysis and simulation process”, AIP (2015), 1660, 070113.
4 B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Design optimization parameters for tractor mounted mulcher blades”, Int. Journal of Applied Engineering Research, 10(23), (2015) pp 43461-43464.
5 S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan, “ Mechanical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC)”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, Vol 1, Issue 1-2, 2015, pp49-55.
6 M.S. Al-Khaldi, M.K.A. Ariffin, S.Sulaiman, B.T.H. Baharudin and N.A. Aziz, “ Improvement in CAM shaft design: An Experimental application and recommendation”, Applied Mechanics and Materials Vol. 780-790 (2015) pp 249-254.
7 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-Walled Parts Formed Using the Injection-Moulding Process”, Int. Journal of Polymer Science, 2015, 659321.
8 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composite via plastic injection molding”, Polymer Engineering and Science,(2015), 11(1), pp. 2531-2540.
9 N.Fachurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharudin, “Analysis of a metal matrix composite automotive component”, Int. Journal of Automotive and Mechanical Engineering, (2015), 11 (1), pp. 2531-2540.
10 Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Shah Ismail, Azmah Hanim Mohamed Arif, and Mahesh Kumar Talari, “Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB2”, Material Science Forum Vol 819 (2015) pp268-273.
11 Hani Mizhir Magid, S.Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Modelling and Simulation of hollow Profile Aluminium Extruded Product”, Applied Mechanics and Materials Vol. 761 (2015) pp 17-21.
12 Ahmad Aizuddin Abd Aziz, Shamsuddin Sulaiman, Aung Lwin Moe and and Aminudin Abu, “Investigation of Plastic Injection Moulding Process Optimization in Complex shape Product”, Applied Mechanics and Materials Vol. 695 (2015) pp 260-264.
13 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-chip interface temperature in an orthogonal turning process”, Applied Mechanics and Materials Vol. 529 (2014) pp 21-26.
14 S.Sulaiman, S. Borazjani and A. Roshan, “Finite Element Analysis of Aluminium-Kevlar/Epoxy Pressure Vessel”, Applied Mechanics and Materials Vol. 529 (2014) pp 27-32
15 M.U.Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Integrated TRIZ-AHP Support System for Conceptual Design”, Applied Mechanics and Materials Vol. 548-549 (2014) pp 1998-2002
16 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical simulation on moulded thin-walled parts via injection moulding process”, Applied Mechanics and Materials Vol. 575 (2014), pp 73-77.
Page 21/62
17 S.H.Tang, Shiva Sadat Moosavipur, S.Sulaiman, M.K.A.M.Ariffin and Morteza Ghobakhloo, “The impact of information technology investment on supply chain capabilities: A review”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp723-726.
18 Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-532.
19 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S.Sulaiman and S.H.Tang, “Managing uncertainty in supply chain management of vessel chatering in Oil and Gas Industry”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp694-699.
20 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Development of microstructure and fracture of Al-6063 alloy using equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp488-494.
21 Muhammad Yusuf, M.K.A.Ariffin, N. Ismail and S.Sulaiman, “Effect of machining process on surface microhardness of Titanium carbide reinforced aluminium LM6 composite”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp495-500.
22 Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-726.
23 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Microharness characteristics of Al-6063 alloy processed by equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014) pp513-518.
24 B.T.H.T.Baharudin, K.P.Ng, S.Sulaiman, R.Samin and M.S.Ismail, “Temperature distribution of micro milling process due to uncut chip thickness”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp 214-221.
25 Mona Kiaee, Shamsuddin Sulaiman and Tang Sai Hong, “Investigation on microstructure and Mechanical Properties of Squeeze Cast Al-Si Alloys by Numerical Simulation”, Advanced Materials Research Vol. 1043 (2014) pp 31-35.
26 H. M. Magid*, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-5), 2014.
27 J.Nemati, S.Sulaiman, G.H.Majzoobi and B.T.H.T. Baharudin, “Finite Element Study of Deformation Behaviour of Al-6063 Alloy Developed by Equal Channel Angular Extrusion”, Advanced Materials Research Vol. 1043 (2014) pp 119-123
28 M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-487.
29 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-500.
Page 22/62
30 J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin and M.A.Azmah Hanim, “Finite Element and metallurgical study of properties of deformed pure copperby ECAE at various strain rates”, Proc ImechE Part C: J Mechanical Engineering Science 2014. Vol 228(9) pp1461-1473.
31 M.D.Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin and A.Khalina, “ Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process”, (2014) Materials and Design 55, pp. 381-386.
32 Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-Based Metal Matrix Composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 145-150.
33 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-699.
34 Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods, Advanced Materials Research Vols. 912-914 (2014) pp 1932-1939.
35 S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-200.
36 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 151-156
37 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-chip interface temperature in an orthogonal turning process”, Advanced Meterials Research, Vol. 903 (2014) pp 21-26.
38 H.M.Magid, S.Sulaiman, M.K.A.M.Ariffin and B.T.H.T. Baharudin, “Stress analysis of forward aluminium extrusion process using finite element method”, Material Research Innovations, 2014.Vol. 18, Suppl 2, S2-1 to S2-6.
39 M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-901, 2014. (ISI, Refereed).
40 M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-347, 2014. (ISI, Refereed).
41 M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical Properties of Al-11.8% Si Matrix Composites”, Materials Science Forum 773, 195-202, 2014. (ISI, Refereed).
42 A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-217, 2014. (ISI, Refereed).
43 S.Sulaiman, A. Roshan and S. Borazjani, “Finite Element of Aluminiu-Kevlar/Epoxy Pressure Vessel”, Advanced Meterials Research, Vol. 903 (2014) pp 27-32.
Page 23/62
44 Suraya Sulaiman, Shamsuddin Sulaiman, Miunira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-Based Metal Matrix Composite”, Advanced Materials Research Vol. 903 (2014) pp 145-150.
45 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Advanced Materials Research Vol. 903 (2014) pp 151-156.
46 M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-774 (2014) pp 841-849.
47 S.Sulaiman, J. Nemati, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Experimental Study of impact strength of Al-6063 alloy Processed by equal channel angular extrusion”, Advanced Materials Research Vol. 911 (2014) pp 158-162.
48 T.R. Sahroni and S.Sulaiman, “Casting quality model for casted aluminium silicon carbide based on non-linear thermal expansion”, Int. J. Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, 2014, pp217-233.
49 Amer N.N.Kakahy, D.Ahmad, Md. Akhir, S.Sulaiman and Ishak A, “Effects of knife shapes and cutting speeds of a mover on the power consumption for pulverizing sweet potato vine”, Key Engineering Materials Vols. 594-595 (2014) pp1126-1130.
50 B.T.H.T. Baharudin, K.P.Ng, S.Sulaiman, R. Samin and M.S.Ismail, “ Temperature distribution of micro milling process due to uncut chop thickness”, Advanced Meterials Research, Vol. 939 (2014) pp 214-221.
51 M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-774 (2014) pp 833-841.
52 Uzair Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Problems evaluation for TRIZ methods using AHP: Case study on car’s dashboard improvement design concepts”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp89-93.
53 C.N.A.Jaafar, I.Zainol, S.Sulaiman and M.I.Ayub, “ Effects of PVA-PEG binder system on microstructure and properties of sintered Alumina”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp355-360.
54 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of feeding angles and cutting speeds of a mower blade with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013), pp260-264.
55 S. Sulaiman, S. Emamian, M. N. Sheikholeslam, and M. Mehrpouya, "Review of the Effects of Friction Stir Welding Speed on Stainless Steel Type 304L," International Journal of Materials, Mechanics and Manufacturing vol. 1, no. 1, pp. 85-87, 2013.
56 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S.Zainudin, K.Abdan and M.R.Mansor, “An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat-thin walled parts by Injection moulding process”, Materials and Design 50 (2013) 451-456.
57 S.Sreenivasan. S.Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin and K. Abdan, “Recent developments of kenaf fibre reinforced thermoset composites: review”, Int. Journal of Maerials Research Innovations, Vol.17, Suppl 2, (2013), pp s2-1 –s2-11.
58 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Pulverization of sweet
Page 24/62
potato vine at different mover speeds”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012022.
59 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of cutting speeds and moisture content on grass chopping (pulverizing)”, Advanced Science letters, Vol 19, No. 9, Sept 2013, pp. 2533-2535.
60 S.Sulaiman, A.Roshan and S.Borazjani, “Finite element modeling and simulation of machining of Titanium alloy and H13 Tool Steel using PCBN Tool”, Applied Mechanics and Materials, Vols. 392 (2013) pp 36-40.
61 S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on cutting temperature of TiAl6V4 Alloy”, Applied Mechanics and Materials, Vols. 392 (2013) pp 68-72.
62 S.Sulaiman, S.Borazjani, A.Roshan and S. Heydaryan, “Failure analysis of aluminium reinforced composite vessel”, Applied Mechanics and Materials, Vols. 392 (2013) pp 178-182.
63 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of feeding angles and cutting speeds of a mover knife with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013) pp 260-264.
64 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of knife shapes and cutting speeds of a mover on the percentage pulverization of sweet potato vine”, Applied Mechanics and Materials, Vols. 421 (2013) pp29-33.
65 R.S.Taufik and S.Sulaiman, “Thermal expansion model for cast aluminium Silicone carbide”, Procedia Engineering 68 (2013) pp. 392-398.
66 Jamshid Nemati, S.Sulaiman, Gholam Hossein Majzoobi, B.T.H.T.Baharudin and Azma Hanim Mohamed Ariff, “Effect of equal channel angular extrusion on fatique life of pure Copper”, Advanced Materials Research Vol. 685 (2013) pp 97-101.
67 S.Sulaiman, S.Borazjani and S.H.Tang, “Finite element analysis of filament-wound composite pressure vessel under internal pressure”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012061.
68 S.Sulaiman and N.A. Ismail, “Analysis of failure in manufacturing machinery”, IOP Conf. Series: Materials Science and Engineering 50 (1) (2013) 012057.
69 D.Ahmad, O.Jamarei, S.Sulaiman, A.B. Fashina and F.B.Akande, “Modelling of motion resistance ratios of pneumatic and rigid bicycle wheel”, Pertanika Journal of Science & Technology, Vol.21(1) Jan 2013, pp. 59-74.
70 A.Abdullah, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin and T.R.Vijayaram, “Green compression strength of tin mine tailing sand for green sand casting mold”, (2013) Pertanika Journal of Science and Technology 21 (2) pp.335-342.
71 T.S. Hong, R. Samin, S. Sulaiman and Weria Khaksar, ‘Development of an Educational Robotic Training Kit”, Int. Journal of Advanced Science Letters (2013) 19 (11) pp. 3304-3306.
72 Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-1284, 2013. (ISI, Refereed)
73 S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-377, 2013 (ISI, Refereed)
Page 25/62
74 Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin,
“Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-108, 2013 (ISI, Refereed)
75 N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-86, 2013 (ISI, Refereed).
76 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-3167, 2013.
77 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-35, 2013. (Refereed)
78 S. Sulaiman, , Umar Ali Umar, S.H. Tang, N. Fatchurrohman, Application of Radio Frequency Identification (RFID) in Manufacturing in Malaysia, Procedia Engineering, Vol. 50(2012), pp. 697-706
79 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012)
80 N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “ Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology 7(2) 2012, pp248-256.
81 Seyedehfarzaneh Nojabaei, Z. Leman, S.H. Tang and S.Sulaiman, “Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing System”, American Journal of Applied Science 9 (9), 2012, pp1435-1442.
82 Shahla Seifi, Norzima Zulkifli, Rosnah Yusuff and Shamsuddin Sulaiman, “Information requirements for sustainable consumption”, Social responsibility Journal, Emerald, Vol. 8 Iss:3 (2012). pp.433-411.
83 Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-39, 2012 (ISI, Refereed)
84 Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Advanced Material Research, 445, 475-480, 2012, (ISI, Refereed)
85 Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-17, 2012 (ISI, Refereed)
86 N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology, 7, 2, 248-256, 2012 (Refereed)
87 N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new
Page 26/62
concurrent engineering - multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-298, 2012 (Refereed)
88 Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, Volume 19, Number 8, pp. 2343-2346(4), impact factor: 1.25 August 2013.
89 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-119, pp 1561-1565, 2012 (ISI, Refereed)
90 Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin, “Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 - 1471, 2012 (ISI, IF 0.52)
91 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012)
92 Ali Hashemi, Desa Ahmad, Jamarei Othman and Shamsuddin Sulaiman, “ Development and testing of a new tillage apparatus”, Journal of Agricultural Science;, Vol. 4. No. 7; (2012), pp. 103-106.
93 M. Nikbakht, N.Zulkifli, N.Ismail, S.Sulaiman, A.Sadrnia and M.Suleiman, “Multi-echelon supply chain design in natural gas Industry”, World Applied Science Journal, 20(1), 2012, pp. 54-63.
94 S.Sulaiman, M.K.A.M.Ariffin and S.Y.Lai, “Springback behaviour in sheet metal forming for automotive door”, AASRI Procedia 3 (2012) pp.224-229.
95 S.H.Tang, N.Hakim, W.Khaksar, S.Sulaiman, M.K.A.Ariffin and R.Samin, “Artificial Neural Network (ANN) approach for predicting friction coefficient of roller Burnishing AL6061”, Int. Journal of Machine Learning and Computing, Vol. 2, No. 6, December 2012, pp. 825-830.
96 T.R.Vijayaram, A.Abdullah and S.Sulaiman, “Determination of green compression strength and permeability of tailing sand for metal casting Industries gathered from ex tin mines in Perak State Malaysia”, Indian Foundry Journal, Vol 58, No.10, October 2012, pp.29-33.
97 M.K.A Ariffin, S.Sulaiman, Tang S.H., M.roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519-524, 2012 (ISI, IF 1.253).
98 M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-15, 2012 (ISI, IF 1.253)
99 A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-23, 2012 (ISI, Refereed)
100 A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-864, 2012 (ISI, Refereed)
101 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A., “Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing)”, Advanced Science Letters, (2012).
Page 27/62
102 S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental
investigation of solidification casting process”, key engineering materials, volume 417-472, pp 601-605, 2011 (ISI, Refereed)
103 S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-3890. 2011 (ISI, Refereed)
104 S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-3895. 2011 (ISI, Refereed)
105 D.Ahmad, S.Shamsuddin, A.B.Fashina and F.B.Akande, “Development of a tractor-pulled motion resistance test rig for traction studies on towed narrow wheels”, Int. J Agric & Biol Eng, Vol.4 No. 4 (Dec 2011) pp21-27.
106 N.Fatchurrohman, S.Sulaiman, M.K.A M Arrifin, A.A Faieza and B.T.H.T. Baharudin, “Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates”, key engineering materials, volume 417-472, pp 1081-1084, 2011 (ISI, Refereed)
107 Mohd Sayuti, S. Suraya, Shamsuddin Sulaiman, T.R. Vijayaram, Mohd Khairol H. Arifin, B.T. Hang Tuah Baharudin, “Thermal Investigation of Aluminium - 11.8% Silicon(LM6) Reinforced SiO2-Particles”, Advance in material and processing technology II, Vol 264-265, pp 620-625, 2011 (ISI, Refereed)
108 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “Influence of cutting parameters on surface roughness for wet and dry turning process”, key engineering materials, volume 417-472, pp 227-232, 2011. (ISI, Refereed)
109 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, T.R. Vijayaram and S.Suraya, “Effect of Quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites”, key engineering materials, volume 417-472, pp 727-732, 2011. (ISI, Refereed)
110 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, S.Suraya and E.Gholamreza, “Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite”, key engineering materials, volume 417-472, pp 721-726, 2011. (ISI, Refereed).
111 M.K.A M Arrifin, S.Sulaiman, B.T.H.T Baharudin, T.S. Hong and S. Sreenivasan, “Simulation of thermoset injection for bulk mulding compounds (BMC)”, key engineering materials, volume 417-472, pp 1101-1106, 2011 (ISI, Refereed).
112 Mohammad Shuaibu Abubakar, Desa Ahamd, Othman Jamarei, Sulaiman Samsuddin and Misron Norhisham, “Evaluation of a dual-purpose chemical applicator for paddy field”, American Journal of Applied Sciences 8 (4):362-367, 2011.
113 Akande, F.B., Ahmad, D., Shamsuddin, S., Jamarei, O.B. and Fashina, A.B. Mathematical modelling of the motion resistance ratio of the pneumatic and rigid bicycle wheels on deformable surfaces. Pertanika Journal of Science and Technology, 2011.
114 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Development of a dual-purpose chemical applicator for paddy fields”, African Journal of Agricultural Research 2011.
115 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Determining the spray droplet size spectrum from a dual-purpose rotary disc chemical applicator”, Int. Journal of Physical Science 2011.
Page 28/62
116 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Distribution pattern assessment of a dual-purpose
rotary disc Chemical applicatior”, Transaction of ASABE 2011.
117 Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahamd and Gholam Hossein Majzoobi, “An approach to determine effect of crane hook on payload sway”, Int. Journal of Mechanics and Applications 2011: 1(1):30-38.
118 D.Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “The design process of a self-propelled floor crane”, 2011 Journal of Terramechanics 48 (2), pp.157-168.
119 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “An investigation into the hook dynamics and effect of hook parameters on the sway angles in hydraulic cranes ”, Scientific Research and Essays Vol. 6(6), pp. 1303-1316, 18 March, 2011.
120 Taufik, S.Sulaiman, T.A.Abdullah adn Sivarao, “Design and Simulation on Compressor Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-265 (2011) pp 403-408.
121 T.R. Sahroni, S. Sulaiman, I. Romli, M.R. Salleh and H.A. Ariff, “Nonlinear Thermal Expansion Model for SiC/Al”, World Academy of Science, Engineering and Technology 78 2011.
122 Taufik, S.Sulaiman, T.A.Abdullah and Sivarao, “Design and Simulation on Cast Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-265 (2011) pp 323-328.
123 Fatai B. AKANDE, Desa AHMAD, Othman JAMAREI, Samsuddin SULAIMAN, l Adepoju B. FASHINA and Hossein SHAMSABADI, “Investigation studies on the effects of tyre inflation pressure on the motion resistance of pneumatic bicycle wheels on hard and deformable surface”, Journal of Agricultural Machinery Science, 2011, 7(3), pp317-323.
124 F.B. Akande, D. Ahamad, S. Sulaiman, O. Jamarei and A.B. Fashina, “ Present state of research on narrow wheels: A prerequisite for traction studies on non-lug narrow wheels”, Leonardo Electronic Journal of Practices and Technologies, Vol 10, Issue 18, January 2011, pp 65-78.
125 Gholam Reza Esmaeilian, Shamsuddin Sulaiman, Napsiah Ismail, Maryam Hamedi, Megat Mohammad Hamdan Megat Ahmad, “ A tabu search approach for mixed-model parallel assembly line balancing problem (type II), Int. Journal of Industrial and Systems Engineering 2011 – Vol 8, No.4 pp407-431.
126 A. A. Faieza, S. Sulaiman and M.Y. Rosnah,“Product Structure Initialization, the Bottleneck of ERP Implementation in Customer Driven Environments: A Case Study”, Pertanika J. Sci. & Technol. 19 (1): 66 – 82 (2011)
127 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “ Influence of cutting parameters on surface roughness for wet and dry turning process”, 2011 Key Engineering Materials 471-472, pp. 233-238.
128 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Mechanical properties of paddy soil in relation to high clearance vehicle mobility”, Australian Journal of Basic and Applied Sciences, 4(5): 2010, pp906-913
129 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “Computer-Aided FEM to Analyze the Composite Materials for Replacing with Steel in Crane Structure”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.3, March 2010, pp233-237.
Page 29/62
130 F.B.Akande, D.Ahmad, O.B.Jamarei, S.Sulaiman, and A.B.Fashina, “ Empirical determination of the motion resistance of pneumatic bicycle wheels for on and off-road performance”, African Journal of Agricultural Research 5(23), pp. 3322-3332.
131 A. Azhar, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, and T.R. Vijayaram, “The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould”, key engineering materials, volume 417-472, pp 769-774, 2011 (ISI, Refereed).
132 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin, A.A. Faieza and S.M. Sapuan, “Coating Performance in High Speed Micro Machining of H13, Tool Steel”, Advanced Materials Research Vols. 83-86 pp 985-992, 2010 (ISI, Refereed)
133 N. Fatchurrohman and S. Sulaiman , “ The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by vortex mixing – sand casting technique”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.1, January 2010, pp12-17.
134 N. Fatchurrohman and S. Sulaiman, “Production and solidification analysis of Titanium carbide particulates reinforced aluminium alloy matrix composite by vortex mixing – sand casting technique”, ICASTOR Journal of Engineering Vol. 3, No. 1 (2010) ,pp 13-20.
135 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Present State on Research on Development of a High Clearance vehicle for Paddy Fields”, Research Journal of Agriculture and Biological Sciences, 5(4): 2009, pp489-497.
136 M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman,”Bead-sort algorithm for load shuffling in miniload ASRS”, Computers and Industrial Engineering, CIE 2009 . art. No 5223906, pp 1781-1786.
137 G.R.Esmaeilian, N.Ismail , S.Sulaiman, , M.M.H.MegatAhmad, & M.Hamedi, “Allocating and balancing of mixed model production through the parallel assembly lines”, 2009, European Journal of Scientific Research 31 (4), pp 616-631.
138 G.R.Esmaeilian, S.Sulaiman, N.Ismail, M.M.H.MegatAhmad, & M.Hamedi. “Application of MATLAB to Create Initial Solution for Tabu Search in Parallel Assembly Lines Balancing”. Int. Journal of Computer Science and Network Security, 8(10), 132-136.
139 Faieza Abdul Aziz, D.T.Pham, Shamsuddin Sulaiman, Napsiah Ismail, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Visual feedback and pseudo-haptic feedback improve manual lifting performance”, Journal of Technology, 49(D) Dec 2008: 157-171.
140 Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-475.
141 Napsiah Ismail, S.Sulaiman, Sai Hong Tang and M.R.Vasili, “A statistical travel time model for miniload automated storage and retrieval systems with open-rack structure”, In. J. IC-AI 2008: 715-721.
142 A.A. Faieza, S. Sulaiman, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Virtual training enhances user performance”, ARCS 2008: 189-195.
143 M. Jolgaf, S.B. Sulaiman, M.K.A. Ariffin and A.A. Faieza, Closed Die Forging Geometrical Parameters Optimization for Al-MMC, American J. of Engineering and Applied Sciences, Vol1, pg 1-6, 2008 (EBSCO, WAD, ASA, DOAJ)
144 M Jolgaf, SB Sulaiman, MKA Ariffin, AA Faieza, Billet shape optimization for minimum forging
Page 30/62
load, European Journal of Scientific Research 24 (3), 420-427, impact factor 0.736, 2008.
145 Faieza, A.A., Sulaiman, S., N. Ismail, Ariffin, M.K.A, B.T.H.T. Baharuddin, Visual Feedback and Pseudo-Haptic Feedback Improve Manual Lifting Performance, Jurnal Teknologi, volume 49, pg10, scopus 2008.
146 S. Sulaiman, M.K.Ariffin, “Design, Analysis and Simulation of Plastic Injection Moulding Product”, Int. Journal of materials and processing technology, (2002), pp.115-120.
147 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, World Journal of Engineering 2008, 5(3): 474-475.
148 G.R.Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, Int. Journal of IEEE 2008, pp1458-1466.
149 M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin and A.A.Faieza, “Closed Die Forging Geometrical Parameters Optimization for Al-MMC”, American J. of Engineering and Applied Sciences 1 (1): 1-6, 2008.
150 M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin and A.A.Faieza, “Billet shape optimization for minimum forging load”, European Journal of Scientific Research, Vol 24 Issue 3 2008, pp420-427.
151 P. Matoorian, S.Sulaiman and M.M.H.M.Ahmad, “An experimental study for optimization of electrical discharge turning (EDT) process”, Int. Journal of Materials and Processing Technology 204 (2008) 350-356.
152 Elfetori F.Abdewi, Shamsudeen Sulaiman, A.M.S.Hamouda and E.Mehdi,”Quasi-static axial and lateral crushing of radial corrugated composite tubes”, Int. Journal of Thin-walled Structures, 46 (2008) 320-332.
153 S.Sulaiman, M.Sayuti and R.Samin,”Mechanical properties of the as-cast quartz particulate reinforced LM6 Alloy matrix composite”, Int. Journal of Materials and Processing Technology 201 (2008) 731-735.
154 S.M.Sapuan, S.S.S.Imihezri, S.Sulaiman, M.Hamdan and E.S.Zainudin, “Comparison of simulated and actual product of polymer composite automotive clutch pedal”, Int. Journal of Mechanical and Materials Engineering (IJMME), Vol 2 (2007) No 1, pp29-39.
155 A.M.S.Hamouda, S.Sulaiman, T.R.Vijayaram, M.Sayuti and M.H.M.Ahmad, “Procssing and characterisation of particulate reinforced aluminium silicon matrix composite”, Int Journal of Achievements in Materials and Manufacturing Engineering, Vol 25 Issue 2 December 2007, pp. 11-16.
156 S.H.Tang, Y.J.Tan, S.M.Sapuan, S. Sulaiman, N.Ismail and R. Samin, “The use of Taguchi method in the design of plastic injection mould for reducing warpage”, Int. Journal of Materials and Processing Technology , Vol 182 (2007), pp 418-426.
157 K.N.M.Tohit, S.Sulaiman, N.Ismail, M.Y.Ismail and S.M.Sapuan, “Improvement of accuracy level using process failure mode and effect analysis and control plan techniques for automotive fender shield assembly”, Journal of Scientific and Industrial Research Vol. 66. October 2007, pp. 811-818.
158 Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman, Megat Mohamad Hamdan Megat Ahmad and Abdel Magid Salem Hamouda, “Processing, Properties and Metallographic Studies of Combined Tungsten Carbide and Alluminium Silicate Particulates Reinforced Aluminium-11.8% Silicon Alloy Matrix Hybrid Composite Castings”, Indian Foundry Journal, Vol. 53 No. 2 February 2007, pp33-41.
Page 31/62
159 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’Bahaviour of axially and laterally crushed corrugated composite tubes’, Int. Journal of Mechanical Engineering Science, JMES435, July 2006.
160 Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Mechanical properties and characterisation studies on the ascast quartz particulate reinforced aluminium- 11% silicon alloy matrix composites”, Journal of Alloys and Compounds Elsevier, UK.
161 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ‘Quasi-Static axial and lateral crushing of radial corrugated composite tubes’, Int. Journal of Thin-Walled Structure, April 2006
162 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Fabrication of fiber reinforced metal matrix composites by squeeze casting technology”, Int. Journal of Materials and Processing Technology , 178 (2006) 34-38.
163 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Int. Journal of Materials and Processing Technology , 172(2006) 394-399.
164 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Numerical simulation of casting solidification in permanent metallic moulds”, Int. Journal of Materials and Processing Technology , 178(2006) 29-33.
165 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries”, Int. Journal of Materials and Processing Technology , Int. Journal of Material Processing Technology, 178 (2006), pp39-43.
166 T.R. Vijayaram and S.Sulaiman, “Quantification and analysis of surface roughness parameters on selected engineering components by mechanical measurement methodology”, Int. Journal of Instrumentation System and Automation (ISA) May 2005.
167 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of shape and geometry on the energy absorption capability of fiberglass composite tubes”, Int. Journal of Composites Science and Technology, August 2005.
168 Hafizal Abu Bakar, Shamsuddin Sulaiman, S.M. Sapuan Salit and T.R. Vijayaram, “Redesigning and construction of three-component balance for low speed wind tunnel”, Asean Journal of Science and Technology for Development July 2005.
169 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Technological advances in squeeze casting technique for processing light metals, alloys and metal matrix composites”, La Metallurgia Italiana Journal, May 2005.
170 C.F.Tan, N. Ismail, S.V.Wong, S.Sulaiman and M.R.Osman, “Development of hole recognition system from step file”, AJSTD Vol. 22 Issue 3, 2005, pp. 285-295.
171 C.K.Ooi, M.M.H.M.Ahmad, S.Sulaiman, “Proposing a non-traditional ordering methodology in achieving optimal flexibility with minimal inventory risk”, Asia Pacific Journal of Marketing and Logistics, Vol. 17, 1 2005, pp 12-18.
172 T.R. Vijayaram and S.Sulaiman, “An experimental investigation to design and from a sand control chart to reduce defects in castings produced by green sand moulding process”, La Metallurgia Italiana Journal, May 2005.
Page 32/62
173 H.B. Lee, S.M.Sapuan, S.Sulaiman and M.H.M.Ahmad, “Design process and rapid prototyping of fibre reinforced composite pedal box”, Int. Journal of Sudan Engineering Society, August 2005, Vol 51 no 44, pp23-32.
174 S.H.Tang, Y.M.Kong, S.M.Sapuan, R.Samin, S.Sulaiman, “Design and thermal analysis of plastic injection moulding”, Int. Journal of Materials and Processing Technology , 171 (2006) pp259-267.
175 S.S.S.Imihezri, S.M.Sapuan, S.Sulaiman, M.M.Hamdan, E.S. Zainudin, M.R.Osman and M.Z.A.Rahman, “Mould flow and component design analysis of polymeric based composite automotive clutch pedals”, Int. Journal of Materials and Processing Technology 171 (2006) 358-365.
176 Y.P.Lim, S. Sulaiman, A.M.Hamouda and M.M.H.M.Ahmad,”Grain refinement of LM6 Al-Si alloy sand castings to enhance mechanical properties”, Int. Journal of Materials and Processing Technology,Vol 162-163 (2005) pp435-441.
177 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman and M.Hamdan, “Simulation of fill time injection moulding process for composite pedals using mould flow analysis software”, Mech. Eng. Res. Journal, Vol. 5 (2005), pp 7-10.
178 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman, M.M.H.M.Ahmad, M.R.Osman and E.S.Zainudin, ‘A simulation work to study the effect of increasing number of gates on air traps and weld line formation in injection moulded composite clutch pedal’, Journal of Applied Technology, vol.2 No. 2 October 2004 , pp 105-109.
179 S.Sulaiman, Y.P.Lim, T.R. Vijayaram, A.M.S. Hamouda and M.M.Hamdan, “An Experimental Investigation on Alumunium-Silicon Alloy Sand Castings to Study the Microstructure-Property Correlation Influenced by Solidifiation Rate”, Int. Journal of Materials and Processing Technology, MSH1750, 2004,pp1-13.
180 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “Design of Composite Clutch Pedal”, Int. Journal Sudan Engineering Society, Issue 42 Vol 50, July 2004, pp15-23.
181 S.H.Tang, S.L.Wong, S.Sulaiman, P.Young and M.S.J. Hashmi, “Computer-Aided Design in Subtractive and Additive Prototyping”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp127-137.
182 S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Int. Journal of Materials and Processing Technology, 155-156 (2004), pp1723-1726.
183 C.F. Tan, N.Ismail, M.R.Osman, S.V Wong and S.Sulaiman,” The Development of Hole Recognition System for Machined parts”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp1-8.
184 M.Y.Rosnah, M.M.H.Megat Ahmad, S.Sulaiman and Z.Mohamad, “Implementation of Computer-Based Technologies for the Small and Medium Scale Industries of Malaysia”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp41-50.
185 E.S. Zainudin, S.M. Sapuan, S. Sulaiman and M.M.H.M. Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites, Ciencia & Tecnologia dos Materiais, 16, no. 4, pp. 57-60, 2004
186 Tang Sai Hong, Wong Su Luan, Paul Young, Shamsuddin Sulaiman and M.S.J.Hashmi, “Hardware design and interfacing of a robot assisted subtractive prototyping system”, Journal Teknologi, 40(A)Jun 2004: 33-50.
Page 33/62
187 E.S.Zainudin, S.M.Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “To explore and confirm the validated experimental results in short fibre reinforced injection moulded polycarbonate composite disc using MPI technique”, Int. Journal of Industrial Technology Vol13 No.2,2004, pp57-63.
188 C.T. Wong, S.Sulaiman, N. Ismail and A.M.S Hamouda, “Design and Simulation of Plastic Injection Moulding Process”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp85-99.
189 Ishak Aris, A.K.M. Parves Iqbal, A.R.Ramli and S.Shamsuddin, “Design and Development of a programmable painting robot for houses and buildings”, Journal Teknologi, UTM, No. 42(A), Jun 2005, pp27-48.
190 N.Ismail, M.R.Osman,C.F.Tan, S.V.Wong and S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Int. Journal of Engineering and Technology, Vol. 1, no. 2, 2004, pp.206-212.
191 Shamsuddin Sulaiman and Lim Ying Pio, “Validation of MAGMAsoft simulation of sand casting process”, Int. Jounal of IEM, Vol. 65 No.1/2, September/December 2004, pp29-38.
192 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A study on comparison of ‘V’ and ‘X’ ribbing in composite pedal using mold flow analysis software”, Int. Journal of Material and Design, Elsevier, 2004, pp78-84.
193 Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail and A.M.S. Hamouda, “Design and Simulation of Plastic Injection Moulding Process, Int. Journal of Plastic Molding Technology 2003, pp.16-20.
194 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman,”A Development and Comparative Study of Two Rapid Prototyping Processes of An Automotive Composite Pedal Box System, Int. Journal of Advanced Manufacturing Technology, Vol 5,2003, pp5-8.
195 M.Y.Rosnah, M.M.H.M. Ahmad, S.Sulaiman and Z.Mohamad, “Increasing competitiveness through advanced manufacturing technologies”, Int. J. Manufacturing Technology and Management, Vol. 5, No. 4, 2003, pp. 371-379.
196 S.Sulaiman, S.H.Tang and M.S.J. Hashmi, “Rapid Prototyping System by Precision Robotic Manipulator”, Journal of Intelligent Manufacturing, (2003). pp56-62.
197 S. Sulaiman, M.K.Ariffin, “Design, Analysis and Simulation of Plastic Injection Moulding Product”, Int. Journal of Plastic Molding Technology, (2003)
198 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites”, Journal of Plastics Rubber and Composites, (2004), pp68-73.
199 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman and S.I.S.Shahruddin, “A development and comparative study of two rapid prototyping processes of an automotive pedal box system”, Int. Journal of Ciencia & Technologia dos Materials, 15, no. 1-2, 2003, pp 5-8.
200 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “A numerical investigation of fibre orientation in injection moulded thermoplastic composites” Advances in Material Processing Journal, Institute of Materials Malaysia, ISBN983-2781-00-0, 2003, pp 1-33.
201 S.Sulaiman, A.M.S. Hamouda, “Solidification Analysis of Sand Casting Process”, Journal of Materials Processing Technology, Casting Technology Special Volume, (2002) pp. 46-52.
Page 34/62
202 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad and M. Hamedullah, “A comparison of computational simulation and experimental results in short fibre reinforced injection molded polycarbonate composites”, Journal of Materials Processing Technology (2002) pp125-130.
203 A.M.S.Hamouda, S.Sulaiman, C.K. Lau “Finite Element Thermal Analysis on the effect of workpiece geometry on the quenching of ST50 steel”, Int. Journal of Material Processing Technology, Vol 119(2001) pp. 354-360.
204 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad “Fiber Orientation of Short Fiber Reinforced Injection Molded Thermoplastic Composites: A Review”, Int. Journal of Plastic Molding Technology, March 2002, Vol 6, No. 1. Pp.1-10.
205 S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental investigation of metal filling system in diecasting process” , Int. Journal of Material Processing Technology, Vol 119 Issue 1 (Dec 2001) pp 268-272.
206 S.Sulaiman, A.M.S.Hamouda, “Modelling of the thermal history of sand casting process”, Int. Journal of Material Processing Technology, Vol 113 Issue 1(June 2001) 245-250.
207 S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Journal of Material Processing Technology, August 2000.
208 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman , M.M.Hamdan, “Development of CAD/CAM system for closed die forging Process”, Vol 138, Int. Journal of Material Processing Technology, pp436-442.
209 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”FE analysis of influence of unequal friction, metal filling and residual stresses in closed die forging processes”, Journal of Mechanics and Materials in Design, Univ. of Toronto, May 2000, p158.
210 A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”Coupled thermo-mechanical finite element analysis of high speed closed-die forging process”, Journal of Mechanics and Materials in Design, Univ. of Toronto, May 2000, p201.
211 S. Sulaiman, A.M.S.Hamouda, S.Abedin, M.R.Osman, “Simulation of metal Filling Progress During the Casting Process”, Int. Journal of Material Processing Technology 100 (2000) 224-229.
212 S. Sulaiman, A.M.S. Hamouda, S. Abedin,” Development of Computer Aided Design System for Casting Process”, Int. Journal of Material Processing Technology, March 1999.
213 Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Int. Journal of Materials Processing Technology, Vol 63 Jan 1997, pp.690-695.
214 S.B.Sulaiman, D.T.Gethin, “Modelling and experimental investigation of heating and shaking subsystem for an oil analysis facility”, Asean Journal of Science and Technology for Development 14(2)(1997) pp 11-26.
215 A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Journal of Materials Processing Tech. Vol PRO060/1-4, pp.723-727.
216 Shamsuddin Sulaiman, D.T. Gethin, “A Network Technique For Analysis Of Thermal Transient Casting Process”, Pertanika Journal of Science & Technology Vol.4 No.2 1996 pp.251-261.
Page 35/62
217 Shamsuddin Sulaiman, D.T.Gethin, “An experimental investigation into the metal filling system of pressure diecasting process”, Journal of Institution of Engineers Malaysia (IEM) March 1996 pp.9-13.
218 Shamsuddin Sulaiman, D.T. Gethin, “Expert System for the Casting Process Selection and Analysis Procedure”, Institution of Engineers Malaysia (IEM) Bulletin April 1995 pp.11-18.
219 Shamsuddin Sulaiman, “Casting Thermal Simulation”, Journal Institution of Engineers Malaysia (IEM) June 1994 (54), pp5-16.
220 S.B. Sulaiman, D.T. Gethin, “A Network Technique for metal flow analysis in the filling system of pressure diecasting and its experimental verification on a cold chamber machine”, Journal Instn Mech Engrs Vol 206 IMechE 1992, pp 261-275.
221
Conference Proceedings
1 J. Nemati, S.Sulaiman, G.H. Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Effect of Equal Channel Angular Extrusion on fatigue life of pure copper. Paper presented at the The 3rd International Conference on Advanced Materials Research(ICAMR 2013), Dubai, UAE.
2 N. Kakahy, D.Ahmad, MD. Akhir, S.Sulaiman and IShak.A. “Pulverizationof sweet potato vine at different mower speed”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
3 J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Development of Microstructure and Fracture Toughness of AL-6063 alloy Using Equal Channel Angular Extrusion Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
4 J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, G.H.Majzoobi, & M.A.Azmah Hanim. (2014). Finite Element Study of Deformation Behaviour of Al- 6063 Alloy Developed by Equal Channel Angular Extrusion. Paper presented at the International conference on engineering and innovate materials (ICEIM), 2014Kuala Lumpur, Malaysia.
5 S.Sulaiman, J. Nemati, B.T.H.T. Baharudin, G.H.Majzoobi,&Hanim, M. A. A. Experimental study of impact strength of Al-6063 alloy processed by Equal Channel Angular Extrusion (ECAE) Paper presented at the International Conference on Key Engineering Materials (ICKEM 2014), Bali, Indonesia.
6 J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, M.A.Azmah Hanim,&G.H.Majzoobi. (2013). Microhardness characteristics of Al-6063 alloy processed by Equal Channel Angular Extrusion. Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
7 S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on Tool-Chip interface temperature in an orthogonal turning process”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-3 July 2013.
8 S.Sulaiman and N. Abidin Ismail, “Analysis of failure in manufacturing machinery”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
9 S.Sulaiman, A.Roshan and M.K.A. Ariffin, “Finite Element modelling of the effect of tool rake
Page 36/62
angle on tool temperature and cutting force during high speed machining of AISI4340 Steel”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
10 S.Sulaiman, S. Borazjani and S.H.Tang, “ Finit e Element anslysis of filament-wound composite pressure vessel under internal stress”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
11 Suraya Sulaiman, Shamsuddin Sulaiman, Najmiah Jaafar and Imrah Yusuff, “Studies of tensile propertiesof Titanium Carbide (TiC) Particulate composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang 1-3 July 2013.
12 N. Fathurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharuddin, “New technique for comceptual selection of manufacturing process and material, case study: metal matrix composite component”, Int. Conference of Quality in Research (QIR 2013), Yogyakarta 25-28 July 2013.
13 Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Aziz, “The effect of TiC particulates on the microstructure and mechanical properties of Aluminium based metal matrix composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-3 July 2013.
14 M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite”, AMPT2012, 23-26 Sept. Wollongong, Australia.
15 M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Chip formation and surface roughness in dry machining of aluminium alloys”, Int. Conference on Mechatronic and applied Mechanics 2011, Guangzhou, 27-28th Dec.
16 M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Optimization of cutting parameters on turning process based on surface roughness using response surface methodology”, Int. Conf. on Applied Mechanics 2011, Shenzhen, China 18-10th November.
17 M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Influence of cutting parameter on surgace roughness for wet and dry turning process”, Int. Conf. on Composite Science and Tech 2011, Kuala Lmpur, Malaysia, 22-24th March.
18 M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, ”Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Int. Conf. on AMPT2011, 13-16 July 2011, Istanbul Turkey.
19 Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites.” Paper presented at the International Conference on advanced design and Manufacturing Engineering (ICADME), September 16-18, 2011, Guangzhou, China.
20 Sayuti, M, Sulaiman, S, B.T.H.T. Baharudin, Arifin, M.K.A, Vijayaram, T.R and Suraya, S.. Effect of Quartz-Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy cast Composites. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-24, 2011.
21 Sayuti, M, Sulaiman,S, B.T.H.T. Baharudin, Arifin, M.K.A, Suraya, S and Gholamreza Esmaeilian. Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala
Page 37/62
Lumpur, Malaysia, March 22-24, 2011.
22 Suraya. S, Sulaiman. S , Ariffin. M.K.A and Sayuti.M. Computer Simulation and Experimental Investigation of Solidification Casting Process. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-24, 2011.
23 Sayuti, M., Sulaiman, S., Baharudin, B. T. H. T., Ariffin, M. K. A. M., Vijayaram, T. R., & Suraya, S. (2011). Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings. Paper presented at International Conference on Mechanical Materials and Manufacturing Engineering (ICMMME 2011) in June 20-22, 2011, Nanchang, China.
24 Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. Manufacturing of TiC Particulate Reinforced Al-11.8%Si Matrix Composites by Mechanical Vibration Mould. Paper Accepted for presented at the 2nd International Symposium on Mechanical Science and Technology (ISMST 2011), December 20-21, 2011, Guangzhou, China.
25 A.Hashemi, D.Ahmad, J.Othman and S.Sulaiman, “Design, development and performance of a disk plow combined with rotary blades”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-7 Dec 2011, Kuantan, Pahang Malaysia, pp11-18.
26 Amer N.N.Kakahy, D.Ahmad, MD Akhir and S.Shamsuddin “Design, development and performance of an integrated slasher for sweet potato harvester: A review”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-7 Dec 2011, Kuantan, Pahang Malaysia, pp37-43.
27 Akande, F.B., Ahmad, D., Jamarei, O.B., Shamsuddin, S. and Fashina, A.B. Investigative Studies on the effects of tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard and Deformable Surfaces. 11th International Congress on Mechanization and Energy in Agriculture Namil Kemal University, Turkey. 2011.
28 M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram,” Mechanical properties of particulate reinforced Alulminium alloy matrix composite”, Int. Conf. on AMPT 2010, Paris 22-24 Oct 2010.
29 Sayuti, M., Suraya, S., Sulaiman, S., M.K.H, Ariffin., and Baharudin, B. T. H. Processing and Characterisation of Particulate Reinforced Aluminium-11,8% Silicon Matrix Composite. Paper presented at Aceh Development International Conference (ADIC2010), Kuala Lumpur, March 26 to 28, 2010.
30 Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. Thermal Investigation of Aluminium - 11.8% Silicon (LM6) Reinforced SiO2-Particles. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-29 October 2009.
31 N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Aluminium alloy reinforced with titanium carbide particules fabricated by sand casting method”, WEC 2010, 2-5 August 2010, Kuching Sarawak.
32 N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Latent heat and solid fraction aspects”, WEC 2010, 2-5 August 2010, Kuching Sarawak.
33
Sayuti. M, S. Sulaiman, Vijayaram T. R., B.T.H.T Baharudin, Ariffin M.K.A and Suraya S., “Manufacturing and mechanical properties of titanium carbide particulate reinforced
Page 38/62
aluminium – 11.8% silicon alloy matrix composite castings”, WEC2010, 2-5 August 2010, Kuching Sarawak.
34 Suraya S, M. Sayuti M, Sulaiman S, and Ariffin. M.K.A. “Tensile properties of titanium carbide particulates composites” , ENCON 2010 14-15 April 2010, Kuching Serawak.
35 Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. Thermal Investigation of Aluminium - 11.8% Silicon (LM6) Reinforced SiO2-Particles. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-29 October 2009.
36 Sayuti, M., Sulaiman, S., Vijayaram, T. R., Baharudin, B. T. H. T., Ariffin, M. K. H., and Suraya, S. Manufacturing and Mechanical Properties of Titanium Carbide Particulate Reinforced Aluminium-11.8% Silicon Alloy Matrix Composite Castings. Paper presented at the World engineering Congress 2010, 2010, Kuching, Sarawak Malaysia, 2-5 August 2010.
37 Suraya, S., Sulaiman, S., Sayuti, M., Ariffin, M. K. H., and Baharudin, B. T. H. T. The Effect of TiC Microstructure and Tensile Properties of Aluminium-11.8% Silicon Alloy. Paper presented at the World Engineering Congress 2010, Kucing, Sarawak, 2-5 August 2010.
38 M.S.Abubakar, D.Ahmad, S.Shamsuddin and M.Norhisham, “Conceptual design of a remote-controlled chemical applicator for flooded paddy fields”, Int. Conf on Sustainable Mobility (ICSM) 2010, 1-3 December, Kuala Lumpur.
39 M.S.Abubakar, D.Ahmad, O.Jamarei, S.Samsuddin and M.Norhisham,”Evaluation of a dual-purpose chemical applicator for paddy fields”, Int. Conference on Mechatronics (ICOM) 2011, 17-19 May, 2011 Kuala Lumpur.
40 Akande, F.B., Ahmad, D., Jamarei, O.B, S. Shamsuddin, S., and Fashina, A.B. (2009). Development of a rolling resistance test rig. Poster presented at the National Conference on Agriculture and food Mechanisation, Renaissance Hotel Melaka, Malaysia. 23-25 June, 2009. Pp 109-112.
41 A.Azhar and S.Shamsuddin, “Preliminary study on tailing sand from ex-tin mine sites in Peninsular Malaysia for use as foundry sand: grain size distribution and average grain size”, Int. Conf. On AMPT 2009, Kuala Lumpur, 26-29th October 2009.
42 M.Sayuti, Suraya S, S. Sulaiman, T.R Vijayaran, M.K.H. Ariffin and B.T.H.T Baharudin, “Thermal investigation of Aluminium – 11.8% silicon (LM6) Reinforced Sio2-Particles”’ AMPT 2009, 26th - 29th October, 2009, Gombak, Selangor, Malaysia.
43 N. Fatchurrohman, S.Sulaiman, M.K.A Ariffin and A.A. Faieza, “The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by sand casting”, ATCI, 3-5 November 2009, PWTC Kuala Lumpur.
44 S.Suraya, S. Sulaiman, S.H. Sheikh Md. Fadzullah, M.sayuti and M.K.A Ariffin, “Mechanical anisotropy ptimiza of fused deposition modeling”’ NSPM 2009, 14-16 December 2009, Bangi Selangor.
45 Akande, F.B., Ahmad, D., Hadi, S. Samsuddin, S., and Fashina, A.B. (2008): Status of research on narrow wheels. Paper presented at the 25th anniversary of the Confederation of the Scientific and Technological Associations in Malaysia (COSTAM), Malaysian Science and Technology Conference, KLCC, Malaysia. MSTC 2008.
46 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, B.T.Tuah and N.Fachurrohman, Optimisation and thermal analysis of casting design”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008,
Page 39/62
pp139.
47 B.T.H.T.Baharudin, S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, and S.M.Sapuan, “Coating performance in high speed micro machining of H13 tool steel”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008, pp274.
48 M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman, “A statistical travel time model for miniload automated storage and retrieval system with open-rack structure”, Proceedings of 2008 Int. Con. On Artificial Intelligence ICAI 2008 and Proceedings of the 2008 Int. Con. On Machine Learning: Models, Technologies and Application, pp 715-721.
49 M.K.A.Ariffin, A.A.Faieza, N.Ismail, B.T.H.T.Baharudin and S.Sulaiman, “Integration of finite element analysis and MATLAB for genetic algorithm optimisation”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008, pp199.
50 Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using overall equipment afficeincy (OEE)”, Proceedings – International Symposium on Infromation Technology 2008, ITSim 4, art. No. 4631974.
51 Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Heuristic model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, 3rd International Symposium on Information Technology Kuala Lumpur 26-29 August 2008.
52 Shahraki, M. R., Ahmad, M. M. H. b. M., N.Ismail, S.Sulaiman, & Esmaeilian, G. R. (2008). Optimal Lot Size of EPQ Model Considering Imperfect and Defective Products. International Conference on Mechanical & Manufacturing Engineering (ICME2008).
53 S.Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and N.Fatchurrohman, “Crushing behaviour of cylindrical and radial corrugated composite tubes”, Proceeding of iC2MS, Melaka, 5-7 August 2008.
54 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, Proceeding of int. Conference ICCE-16, Kunming China 21-25 July 2008,pp663-664.
55 A.A. Faieza, S. Sulaiman, M.K.A. Ariffin, B.T.H.T. Baharuddin, “Virtual Training Enhances User Performance” ARCS 2008, 7-10 July 2008, Orlando, FL, USA.
56 Ariffin, M. K. A.; Badakhshian, M.; Sulaiman, S. B.; Faeiza, A. A. , “Automated Guided Vehicles Scheduling Optimization by Fuzzy Genetic Algorithm” The 12th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI, 29 jun – 2 july 2008, Orlando, Florida, USA.
57 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Coating Performance in High Speed Machining”, AMPT 2008, 2 -5 November 2008 Manama, Bahrain.
58 M.Badakhshian, S. B. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Automated Guided Vehicles using Fuzzy Genetic Algorithm”’ International Conference on Mechanical and Manufacturing Engineering, ICME 2008, 21-23 May 2008, Johor Bahru Malaysia.
59 M.K.A.Ariffin, A.A.Faieza N.Ismail, B.T.H.T Baharudin and S. Sulaiman. “Intergration of finite element analysis and matlab for genetic alagorithm optimization”, AMPT 2008, 2 -5 November 2008, Manama Bahrain.
60 Mostafa badakshian, shamsuddin sulaiman, Mohd khairol anuar mohd Ariffin, “Fuzzy genetic algorithm model for optimization of automated guided vehicle scheduling”, 38th
Page 40/62
Conference on Computer and Industrial Engineering (CIE38), 31 October – 2 November 2008, Beijing, China.
61 S. Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and A.A.Faieza, “Effects of shape and geometry on the energy absorption of fiberglass composite tubes”, International Community for Composites Engineering (ICCE) 16, 20-26 July 2008, Kunming China.
62 S.Sulaiman, M.Sayuti and R.Samin “Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites”, Proceeding of 10th Int. Conf. on Advances in Materials and Processing Technologies AMPT, Korea, 8th – 11th October 2007, pp1733-1742.
63 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line and Effect in Supply Chain Management. International Conference In Supply Chain Management, 118-127.
64 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Using Human-oriented and Process-oriented Strategy for improving implementation of TPM in Food Industries. 4th International Conference In Maintenance Management, Iran.
65 S.Sulaiman, elfetori abdewi, M.K.A. Ariffin and N. Fatchurrohman, “Crushing behaviour of cylindarical and radial corrugated composite tubes”, IC2MS, 5-7 august 2008, Melaka Malaysia.
66 S.Sulaiman, M.K.A Ariffin, A.A. Faieza and Elfetori F. Abdewi, “Effects of shape and geometry of on the energy absorption of fiberglasss composite tubes” ICCE-16, 20-26 July 2008 Kunming China.
67 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Manufacturing of Radial Corrugated Composite Tubes for Crushing Behaviour and Energy Absorption”, AMPT 2008, 2-5 November 2008, Manama, Bahrain.
68 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Optimisation of Die Casting Design”, AMPT 2008, 2 -5 November 2008. Manama, Bahrain.
69 S.Sulaiman, T.R.Vijayaram and R.Samin, “Squeeze casting technique for processing light metals, alloys and metal matrix composites”, Proceeding WEC 2007, 5-9 August 2007, Penang.
70 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008b, 21st – 23rd May, 2008). Heuristic Model for Improving Risk Priority Number by using Overall Equipment Efficiency International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) Johor Bahru, Johor, Malaysia.
71 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008a). Development of traditional assembly line balancing by using new model assembly line balancing. International Conference on Plant Equipment and Reliability - ICPER 2008.
72 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Development of traditional assembly line balancing using new model assembly line balancing. International Conference on Applications and Design in Mechanical Engineering.
73 S.Sulaiman, Y.P.Lim and M.M.H.M.Ahmad, “Combination effect of grain refiner and modifier on the metallurgical properties of LM6 Al.Si sand casting” Proceeding WEC 2007, 5-9 August 2007, Penang.
74 Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line. National Intelligent System and Information Technology Symposium (UPM), 07(2nd), 232-240.
Page 41/62
75 Gholam Reza esmaeilian, M.M.H.M.Ahamd and S.Sulaiman, “ Assembly line and balancing
assembly line”, Proceeding WEC 2007, 5-9 August 2007, Penang.
76 P. Matooriam, S.Sulaiman and MMH. Megat Ahmad, “Using Taguchi quality engineering method to optimize electrical discharge turning”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-26 October 2007 Kangar Perlis, Malaysia, pp472-476.
77 G.R.Esmaeilian, R.Samin, M.M.H.Megat Ahmad, S.Sulaiman and N.Ismail, Development of traditional assembly line balancing using new model assembly line balancing”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-26 October 2007 Kangar Perlis, Malaysia, pp13-17.
78 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’Lateral collapse of composite radial corrugated tubes’, International Conference on Composite Materials and Nano-Structures, iC2MS’06, 25-29 April 2006, Shah Alam Selangor Malaysia.
79 T.R.Vijayarm, S.Sulaiman, A.M.S.Hamouda and M.M.Megat Ahmad, ‘Composite materials characterization using SEM: Current status and future trends’, 13th Int. Scientific Conference of Electron Microcopy, Penang Malaysia, 21-25 Sept 2006.
80 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’An experimental investigation into crushing behaviour of radial corrugated composite tube’, Third Internation Conference on Structural Stability and Dynamics, ICSSD, 19th-22nd June 2005, Florida, USA.
81 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’An experimental investigation of the effect of specimen shape and geometry on the energy absorption of fiber glass composite tubes’, Internation Advanced Technology Congress, IATC 2005 6-8 December 2005, Putrajaya Malaysia, pp238-245.
82 L. Ying Pio, S. Sulaiman, A.M.Hamouda and M.M.M.Ahmad,”Grain refinement of LM6-Si alloy sand casting to enhancement mechanical properties”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.625-629.
83 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.1-4.
84 T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Quality control aspects and prospects to reduce rework and rejection in metallurgical industries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.567-570.
85 T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Computer simulation of solidification of castings processed in metallurgical engineering foundries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp571-577.
86 Lim Ying Pio, Shamsuddin Sulaiman, “The simulation of sand castings process with MAGMASOFT”, Proceeding of the 2nd INTERNATIONAL Conference on Mechatronics, ICOM’05, 10-12 May 2005, Kuala Lumpur, Malaysia, pp789-796.
87 Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Quantification of mechanical properties and characterisation of fracture surfaces on the ascast quartz particulate reinforced aluminium- 11% silicon alloy matrix composites”, Abstract published in ICCE12 Spain International Conference Proceedings, 2005.
Page 42/62
88 N.Ismail, M.R.Osman, C.F.Tan, S.V.Wong, S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Proceeding of Int. Eng. Convention 2004, 22-25 August 2004, Amman Jordan.
89 R. Samin, N.Ismail, S.Sulaiman, R.Ali, M.M.Hassan, “Robot Industry trajectory planning using MSC Visual Nastran”, Proceedings of the 19th International Conference on CAD/CAM, Robotics and Factories of the future (CARS & FOF 2003) 22-24 July 2003 Kuala Lumpur, pp. 911-918.
90 Suditama Sulaiman, M.M.H.Megat Ahmad, S.Sulaiman, N.Adam,”Experiment Analysis of Thermal Storage Material and Heat Transfer Characteristic pipes arrage heated immerse in the material Thermal Storage”, 3rd Int. Conf. On Advances in Strategic Technologies (ICAST 2003) 12-14th August 2003, Kuala Lumpur. Pp1045-1048.
91 S.Sulaiman, A.M.S. Hamouda and M.K.A.Ariffin, “Design and Fabrication of Plastic Injection Mould”, Proceeding of AMPT2003, 8-11 July 2003, Dublin Ireland, pp1603-1605.
92 S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Proceeding of AMPT2003, 8-11 July 2003, Dublin Ireland, pp531-534.
93 Shamsuddin Sulaiman, “Numerical Analysis of Solidification in Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-15 March 2003, Batam Indonesia, pp2.7-2.10.
94 Shamsuddin Sulaiman, “An Application of Network Method in Thermal Transient Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-15 March 2003, Batam Indonesia, pp2.11-2.19.
95 S.Sulaiman, A.M.S Hamouda and M.K.A Ariffin, “Design and fabrication of plastic injection mould”, AMPT 2003, 8-11 July 2003, Dublin Ireland.
96 M.K.A Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman, N Ismail, “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, World Engineering Congress 2002, 22-25 July 2002, Sarawak Malaysia.
97 M.K.A Mohd Ariffin, S. Sulaiman, M.M. H.Megat Ahmad, “Plastic Flow Simulation of Plastic Injection Moluding Process”, The International Conference on Mechatronics, 12-13 February 2001, Kuala Lumpur.
98 Razali Samin, Napsiah Ismail Ismail, Shamsuddin Sulaiman, Roslizah Ali, Md. Mahmud Hasan, “Robot Manipulation Trajectory Planning for Complex Positions”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp425-430.
99 Tang S.H., S.Sulaiman, Chia A.P. “Industrial Robot Selection System – A Preliminary Study”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp416-418.
100 Rosnah Mohd Yusuff, M.M.H.Ahmad, S.Sulaiman, Z.Mohamad, “Implementation of Computer-Based Technologies for the Small and Medium Scales Industries of Malaysia”, Proceding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp102-105.
101 Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The Development of Hole Recognition System for Machined Part”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp19-22.
102 Tang S.H., Sulaiman.S., Hashmi M.S.J, “Computer-Aided Design in Subtractive and Additive Prototyping”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002,
Page 43/62
Kuching Sarawak Malaysia, pp342-346.
103 Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail, A.M.S. Hamouda “ Design and Simulation of Plastic Injection Moulding Process”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp193-198.
104 M.K.A.Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman and N.Ismail “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp329-332.
105 S. Sulaiman, Y.B .Leong, “Development of Thermal Analysis Software of Casting Process, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp189-192.
106 S.Sulaiman, “Modelling of Thermal History of Sand Casting Process”, Int. Conf. Of AMPT01, 19-21 Sept 2001, Madrid Spain.
107 S.Sulaiman, “An experimental investigation of temperature history of sand casting process”, Int. Conf. Of AMPT01, 19-21 Sept 2001, Madrid Spain
108 Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The implemention of feature recognition system for CAD/CAM Integration”, SCORED 2001 UTM.
109 Shamsuddin Sulaiman, “Simulation and verification of thermal transient of sand casting process”, International Conf. On Mechatronic 2001, 13-14 Feb 2001 Kuala Lumpur.
110 M.K.A.Mohd Ariffin, S.Sulaiman, M.M.H.M.Ahmad, ”Plastic Flow Simulation of plastic injection Moulding Process”, International Conf. On Mechatronic 2001, 13-14 Feb 2001 Kuala Lumpur.
111 Tang, S.H, Sulaiman,S. Hashmi, M.S.J. “Precision Robotic Manipulator based Rapid Prototyping System”, Proceeding of the IASTED Int. Conf. Robotics and Automation 2000, August 14-16, 2000, Honolulu, Hawai USA.
112 S.Sulaiman. A.M.S.Hamouda, ”Modelling of thermal history of sand casting process”, 5th Asia Pacific Conference on Material Processing 25-27 June 2001 Seoul, Korea.
113 S.Sulaiman, A.K.H.Lim, C.L.Tan “An experimental investigation of temperature history of sand casting process”, Proceeding of ICAMT2000 UTM, pp299-304.
114 S.Sulaiman, A.K.H.Lim, “Modelling of Thermal Analysis of Sand Casting Process”, Proceeding of ICAMT2000 UTM, pp595-600.
115 S.Sulaiman, A.M.S.Hamouda, “An experimental investigation of temperature history of sand casting process”, Int. Conference on Advances in Strategic Technologies- 2000 UKM Kuala Lumpur 15-17 August 2000.
116 M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Finite Element Simulation And Optimization Of Plan Strain Closed Die Forging Process, International Conference On Advances In Strategic Technology, ICAST 2000, 15-17 August 2000, Malaysia.
117 M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: on the influence of unequal friction into load, metal filling and residual stresses in closed die forging process: finite element approach, 3rd international conference on mechanics and material in design, 29-31 may 2000, Orlando, USA.
118 M. A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Development of
Page 44/62
CAD/CAM System for Closed-Die Forging Process, International Manufacturing Conference in China, (Hong Kong, 16-17 August 2000).
119 C.K.Ooi, M.M.H. Megat Ahmad, M.R.Osman, M.Y.Rosnah, S.Sulaiman, M.Y.Ismail, “The Effectiveness of Managing Long Lead-Time Parts by Family Ordering”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp459-464.
120 M.A.Hossain Mollah, S.M.Sapuan, S.Sulaiman,”Design Aspects of A Composite Material Country Boat”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp429-434.
121 S.Sulaiman, M.R.Osman, Y.K.Chin,”Design and Development of an Automated Orientation Detection System with Robot Arm and PLC Integration”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp363-367.
122 Y.C.Low, M.R. Osman, S.Sulaiman, N.Ismail, “ Investigation Of The Need For Local Plastic Injection Moulding (PIM) Robot”, ”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp357-361.
123 S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental analysis of metal filling in diecasting process”, Proceeding AMPT ’99, 3rd – 6th August ’99, Dublin, Ireland.
124 S.Sulaiman, W.K.Binienda, Y.Wang, “Internal Pressure Effect on Residual Stresses for Filament Wound Composite Tubes”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur., pp51-55.
125 S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-21 May 1999.
126 Elfetori F. Abdewi, S.Sulaiman, A.M.S.Hamouda, “Computational Study on the Effect of Thermal Stresses on Die Casting Design”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp337-343.
127 A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland..
128 S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-21 May 1999.
129 A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland.
130 F.Hassan, S.Sulaiman, A.M.S.Hamouda, “Casting materials: Recent advances and application “, Int. Conf. Of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur, pp134-144.
131 Elfetori F. Abdewi, S.Sulaiman, A.M.S. Hamouda, Megat M.Hamdan,”Finite Element Analysis and Optimization of Die Casting Design”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur,pp1006-1016.
132 S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur, pp1017-1028.
133 S. Sulaiman, A.M.S.Hamouda and S.Abedin, “Development of Computer Aided Design (CAD)
Page 45/62
system for casting process”, Proc. of Int. Conf. on Advences in Materials and Processing Technologies, AMPT-97, Portugal, June 1997.
134 M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Development of a mathematical model for zinc oxide varistor for low weight loss and shrinkage rate”, Proceeding of Int. Conf. on Advances in Materials and Processing Technologies, AMPT-97, Portugal, June 1997.
135 M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Optimization of sintering process for improved electrical characteristics of Zinc Oxide Varistors”, Proc.of Int. Conf. FAIM’96 Georgia USA pp.739-747.
136 Shamsuddin Sulaiman, Tang Sai Hong, “Gating system design in sand casting”, Proceeding of the 7th Int. Conf. on Machine Design and Production, Turkey Sept 11-13 1996.
137 Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Proceeding of Int. Con. on Material Processing, Hong Kong 12-14 Nov. 1996.
138 A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Proc. of the 6th Int. Conference on Metal Forming ’96, Krakow Poland, Jun23-26 1996 pp.723-727.
139 Shamsuddin Sulaiman, “Expert System for Manufacturing Process”, Proc. Pacific Conf. on Manufacturing December 19 - 22, 1994, Jakarta Indonesia pp.339-346.
140 Shamsuddin Sulaiman, Shahnor Basri, “An Application of Expert System in the Casting Process”, 5th International Conf. on Machine Design and Production September 16-18 1992, METU, Ankara-Turkey.
141 S. Sulaiman, D.T. Gethin, “An Application of a Thermal Network Analysis for Casting Simulation”, Proceedings of the 7th International Conference on Numerical Methods in Thermal Problems 1991. (Eds. Lewis, R.W., Chin J.H. and Homsey G.H), pp248-258.
Other Publications (Local/International News Coverage)
NO Title
1 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin, K,Abdan and M.R. Mansor, “Preliinary study the effect of packing pressure on thin-walled parts by injection moulding process”, The 2nd UPM-UniKL Symposium, on Polymeric Materials 2013, 28February 2013
2 M.U. Rosli, M.K.A. Ariffin, S.M. Sapuan and S. Sulaiman, “Material selection of thermoset matrix for natural fiber composites automotive armrest using AHP Method”, The 2nd UPM-UniKL Symposium, on Polymeric Materials 2013, 28February 2013.
3 M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin, A.A.Faieza and BT Hang Tuah Baharudin,’Optimization of plate forming process parameters’, Proceedings of EnCon2010, 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Suatainable Environment, April 14-16, 2010, Kucing Sarawak, Malaysia.
4 G.R.Esmaelian, M.M.H.M.Ahmad, S.Sulaiman, N.Ismail, “Assembly line and balancing assembly line”, Intelligent System and Information Technology Symposium 2007, 30-31 October 2007, ITMA, UPM Serdang Selangor.
5 S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A comparison study on increasing injection location for glass fiber reinforced PA 6,6 composite automotive clutch pedal”, Proceeding of 3rd
Page 46/62
National Technical Postgraduate Symposium 2004 Dec 15th Kuala Lumpur.
6 S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman “Mould Design Consideration for Injection Moulding of Short Glass Fiber Reinforced Polyamide Composite for Clutch Pedal”, Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
7 A. Manaf, N.Ismail, S.Sulaiman "Reverse Engineering Technique for Modelling Free form Feature Surfaces" Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
8 P. Nopnakorn, N.Ismail, MMHM Ahamad, S.Sulaiman "A Prototype 2D Drafting System in ISO Mechanical Engineering Drawing Constraint" Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
9 S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product design consideration for short glass fibre reinforced composite clutch pedal” Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
10 C.F.Tan, N.Ismail, S.V.Wong, S.Sulaiman and M.R.Osman "Development of A knowledge-based Feature Recognition for System for Mechanical Parts" Proceeding of AIAI Conf. 24-25 June 2003, Kuala Lumpur.
11 Ishak bin Aris, A.K.M.Parves iqbal, Shamsuddin Sulaiman, Abd. Rahman Ramli and Md Mahmud Hassan, “Development of a painter robot for construction industry”, Proceeding of AIAI Conf. 24-25 June 2003, Kuala Lumpur.
12 H.B.Lee, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad, ”Design and Rapid Prototyping Process for a Polymeric Based Composite Automotive Pedal Box System”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-based Composite Automotive Components, 25th July 2003, Faculty of Engieering UPM, Editor Mohd Sapuan Salit, pp5-20.
13 S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product Design Consideration for Short Glass Fiber Reinforced Composite Clutch Pedal”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-based Composite Automotive Components, 25th July 2003, Faculty of Engineering UPM, Editor Mohd Sapuan Salit, pp55-63.
14 N. Ismail, C.F.Tan, S.V.Wong, M.R.Osman, S.Sulaiman, “ Rule-Based Feature Extraction and Recognition from STEP File”, 2nd Student Conference on Research and Development (SCOReD2002), July 16-17, 2002, Shah Alam, Malaysia.
15 Shamsuddin Sulaiman, A.K.Lim, Lai Tze Siung, Tan Chen Loon, “ Experimental and Thermal Transient of Sand Casting Process”, MechE Seminar on Information Technology in Mechanical and Manufacturing Engineering, 4th Oct 2001, UPM.
16 S. Sulaiman, Wong Choon Tat, “Mould design and fabrication for plastic injection moulding”, Malaysian Science and Technology Congress (C) 2001, Penang.
17 S. Sulaiman, Wong Choon Tat, “Design, Analysis and Simulation of plastic product”, Malaysian Science and Technology Congress(B) 2001, Melaka.
18 Elnougomi A.O, Desa Ahmad, Azmi Yahya, Shamsuddin S., “Development of tractor mounted peanut harvesting equipment”, UPM Engineering Research Seminar and Exhibition, 2-3 Oct 2001.
19 A.M.S. Hamouda, S. Sulaiman, “The Coming Era of Intelligent Materials: Business Opportunities”, Malaysian Science and Technology Congress ‘97, Genting Highlands, 13 - 15 October 1997.
20 Shamsuddin Sulaiman, “Thermal Network Analysis for Casting Process in High Pressure Die Casting”,
Page 47/62
National Conference on Engineering Education and Research, 15-16 June 1993, UPM.
21 S.Sulaiman, A.M.S.Hamouda and M.H.Megat, “Thermal Network Analysis Software TNAS”, Report and Manual presented in Expo Science and Technology, 2-4 Nov 2002, PWTC Kuala Lumpur.
22 Gasing plastic, Menyusur akar orang kita, 6 februari 2014 (Laporan Khas TV1, 6 Februari 2014: Jam 12:30 – 13:00)
f. Recognition/Awards
No Year
1 2014 Excellent in Service Award 1998-2014
2 2011 2 Bronze medals Research Award
3 2005 Silver Jublee Medal with zirconia, Research Award – Poland May 2005 Silver Medal Research Award (TNAS) – Invention and Research Exhibition Silver Medal Research Award (Corrugated Tubes Machine) Bronze Meal Research Award (Analysis and Fabrication of Injection Molded glass polyamide composite) Bronze Medal Research Award (Development of Intelligent Process Planning system for prismatic parts)
4 2003 Who’s Who in the World 20th Edition 2003
5 2002 Gold Medal Research Award – R&D Exhibition UPM Silver Medal Research Award – Expo S&T 2002 Ministry of Science, Technology and Environment of Malaysia
6 1995 Asian Development Award for training in Akron Ohio USA Felowship program in China- UNESCO 1995
5. Professional Services and Administrative Duties
a. Professional Services
International
No Detail Designation Year
1 2 International Conf. on Design, Materials and
Manufacturing, Kuala Lumpur, 25-27 May 2016.
International Advisory Commettee member
2016
3 2006 International Conference on Mechanical, Manufacturing, Modelling and Mechatronics (IC4M 2016), Kuala Lumpur, 27-29 Feb 2016.
Program Committee Chair 2016
4 International Conf. on Mechanical Automation and Control Engineering, February 27-29, 2016, Phuket, Thailand
Technical Committee member
2016
5 5th International Conf. on Key Engineering Materials (ICKEM 2015), March 21-23, 2015, Singapore.
Honorary Chair 2015
6 Internaational Conf. on Material, Engineering and Technilogy (ICMET 2015), July 1-2, 2015, Bali Indonesia.
Honorable Committee Member
2015
Page 48/62
7 4th International Conf. on Manufacturing and Industrial Engineering (ICMIE 2015), March 21-23, Singapore.
Honorary Chair 2015
8 Jurnal Kejuruteraan UKM International Advisory Board Member
1st Jan 2015 – 31st Dec 2018
9 International Conference on Advanced Material Processing Technology, Madrid, Spain, Dec 14-17 2015.
Steering Committee member 2015
10 Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-18, 2014, Bangkok, Thailand.
Honorary Chair 2014
11 Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-18, 2014, Bangkok, Thailand.
Keynote Speaker 2014
12 CUTSE2014 Curtin University Science and Engineering International Conference, 3-4 December 2014, Kucing, Sarawak, Malaysia.
Scientific Committee Member
2014
13 4th International Conference on Key Engineering Materials (ICKEM2014), March 22-23, 2014, Bali Indonesia.
Honorary Chair 2014
14 International Conference on Advanced Material Processing Technology, Dubai UAE, Nov 16-20, 2014.
Steering Committee member 2014
15 American Journal of Software Engineering and Application
Editorial Board Member 2014 – To date
16 An International Journal of Optimization Control: Theories and Applications
Editorial Board Member 2013 – To date
17 International Conference on Advanced Material Processing Technology, Taipei, Taiwan. Sept 22-26, 2013.
Steering Committee member 2013
18 International Conf. on Advances in Mechanical and Manufacturing Engineering (ICAM2E) 2013, Kuala Lumpur.
Organising Committee Member/ Session Chairman
2013
19 2013 World Congress on Electronics and Electrical Engineering, December 29-30, 2013, Kuala Lumpur.
Program Chair 2013
20 Int. Conf. of Manufacturing Engineering (iMEC) Kuantan Pahang, Malaysia, Sept 21-23, 2013.
International Advisory Committee
2013
21 Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-21, 2013.
Conference Chair 2013
22 Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-21, 2013.
Keynote Speaker 2013
23 International Conference on Advanced Material Steering Committee member 2012
Page 49/62
Processing Technology Wollongong Australia, 23-25 Sept 2012.
24 International Conference on Advanced Material Processing Technology ,Istanbul, Turkey 13-16 July 2011
Steering Committee member 2011
25 International Conference on Advanced Material Processing Technology Paris, France, Oct 2010.
Steering Committee member 2010
26 An International Journal of Optimization and Control: Theories & ApplicationISSN: 2146-0957, eISSN:2146-5703, Dora Co. Ltd, Bursa, Turkey
Editorial Advisory Board 2010-To date
27 International Conference on Advanced Material Processing Technology, Kuala Lumpur, Malaysia, September 2009.
Steering Committee member 2009
28 International Conference on Advanced Material Processing Technology, Manama, Bahrain Oct 2008.
Steering Committee member 2008
29 International Conferences Keynote Address/Speaker
2001-To date
30 International Conference on Advanced Material Processing Technology Seoul, Korea, October 7-10, 2007
Steering Committee member 2007
31 12th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2006, Gliwice, Poland. 27-30 November 2006.
International Programme Committee Member
2006
32 International Conference on Advanced Material Processing Technology Las Vegas, Nevada, USA, July 30-August3, 2006.
Steering Committee member 2006
33 11th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2005, Gliwice, Poland. 6-9 December 2005.
International Programme Committee Member
2005
34 International Conference on Manufacturing and Material Processing, Kuala Lumpur March 2006.
International Committee Member
2006
35 International Conference on Achievements in Mechanical and Material Engineering, Gliwice-Wisla, Poland. 16-19 May 2005
International Committee Member
2005
36 International Conference on Advanced Material Processing Technology Gliwice-Wiala, Poland. 16-19 May 2005
Steering Committee member 2005
37 3rd International Conference on Advanced Manufacturing Technology ICAMT 2004, Kuala Lumpur, 15-18 May 2004
International Committee Member
2004
38 12th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Gliwice-ZaKopane Poland 7-
International Committee Member
2003
Page 50/62
13 Dec 2003
39 11th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Poland 10-13 Dec 2002.
International Committee Member
2002
40 International Conference on Advanced Material Processing Technology 8-11July 2003 Dublin, Ireland
Steering Committee member 2003
41 International Conference on Advanced Material Processing Technology 19-21 Sept 2001 Madrid Spain
Steering Committee member 2001
42 Advances in Material and Mechanical Engineering Conference AMME , Poland, 20-22 Sept 1999.
International Committee Member
1999
43 International Conference on Advanced Material Processing Technology, 2-6 August 1999 Dublin, Ireland.
Steering Committee member 1999
44 10th Jublee International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2001 Cracow, Poland 9-13 Dec 2001
International Committee Member
2001
45 Symposium on Advanced Materials & Design , 29-31 May 1999 Orlando USA.
International Committee Member
1999
46 International Conference on Advanced Material Processing Technology 27-29 August 1998 Kuala Lumpur
Chairman 1998
National
No Detail Designation Duration
1 Infranstructure University Kuala Lumpur Industrial Advisory Panel 2015 2 Board of Study
MSc Eng (Manufacturing Eng) IIUM.
Advisory Panel 2013
3 Board of Study (Bac. Tech. Manufac. Design), IPROM UniKL
Industirial Advisory Panel Member
2013
4 Bac. Sc (Manufacturing Eng) School of Mechanical Eng. USM.
External Assessor 2008/2009
5 B.Eng (Manufacturing) University of Malaya.
Advisory Panel 2014
6 UITM, UTM, UKM, IIUM, UMP, UTeM, UniKL, USM,
External Assessor Panel (Promotion of Professorship)
2005- To date
7 Bac. Sc (Mech). Faculty of Mechanical Engineeirng UMP, Pekan, Pahang.
External Assessor 2012-2013
8 B. Tech (Manufacturing) External Assessor 2014-2015
Page 51/62
B.Tech (Product Design) Dept. of Manufacturing Technology Faculty of Engineering Technology, UTeM.
9 B. Eng Tech (Automotive) MSI, UniKL, Kulim
External Assessor 2013-2014
10 Master of Eng (Manufacturing) School of Manufacturing Engineering, UNIMAP.
External Assessor 2013/2014-2014/2015
11 TATI Univ. College, Kemaman. External Assessor 1st June 2009-30th May 2011
12 Malaysian Qualifications Agency (MQA)
Expert Panel 1998- To date
13 Jabatan Perkihmatan Awam (Federal Training Funds)
Expert Panel/Judge 2013
14 Board of Study (MS Manufac. Eng) International Islamic University Malaysia
Advisory Panel Member 2011-2012
15 Department of Mechanical Engineering University Tenaga Malaysia (UNITEN)
Industirial Advisory Panel Member
1st July 2009-30th June 2011
16 9th National symposium on Polymeric materials 2009 15-16 December 2009, Hotel Residence, UNITEN
Committee Member 2009
17 18 National Vocational Training Council
Ministry of Human Resources, Malaysia
Trade Advisory Committee (Plastic Industry)
1995-1998
19 National Vocational Training Council Ministry of Human Resources, Malaysia
Trade Advisory Committee (Foundry)
1999- to date
20 Advanced Material Working Group Ministry of Science, Technology and the Environment of Malaysia
National Working Committee 1997-2002
21 Japan-Malaysia Technical Institute (JMTI) Ministry of Human Resources, Malaysia
Chairman, National Training Advisory Committee
1999- To date
22 Bhg Pendidikan dan latihan (Kemahiran) MARA
Curriculum Advisory Committee
2005-To Date
23 The Second World Engineering Congress 22-25 July 2002, Kuching Sarawak, Malaysia
Technical Committee (Manufacturing Division)
2002
24 Development of Curriculum for National Occupational Skill Standard, National Vocational Training Council Ministry of Human Resources, Malaysia
Committee Member Oct 1992-1996
25 Grant Evaluation Committee (Manufacturing/Engineering and Technology Division) Ministry of Science, Technology and the Environment /Innovation of Malaysia
Panel Member 2000 – To date
26 National, Conference proceeding 9th National Symposium of Polymeric Materials NSPM 2009
Chief Editor 2009
27 National, National Symposium on Polymeric Advisor 2009
Page 52/62
Materials 2009
28 National, National Symposium on Polymeric Materials 2009
Scientific Committee 2009
29 Kolej Negeri, Seremban Advisory Member 2002-2005 30 Research & Development Exposition 2003
9-12 October 2003 PWTC Kuala Lumpur
Organising Committee Member
2003
31 Lembaga Pengelola Sekolah Menengah Agama MAIWP
Board Member 2014-To date
University
No Detail
Designation Duration
1 Sport and Social Club Faculty of Engineering
President 2012-2014
2 Mentor for New Lecturer (Dr. Siti Azfanizam)
Mentor 2012-2013
3 Panel evaluator for program Bachelor of Wood Science and Technology
Panel 2011-2012
4 Engineering Doctorate Program
Member 2011 - now
5 Institute of Advanced Technology (ITMA - ISRL)
Research Associate 2010 - 2011
6 Institute of Tropical Forestry and Forest Products (INTROP)
Research Associate 2012 -2013
7 ROBOCON, UPM
Team Manager (Mechanical) 2008-2009
8 Inter-institutional race, Eimarace
Director 2009-2010
9 Academic Advisor
Advisor 2006 - present
10 Shell Eco Marathon
Director 2011-2012
11 AUTO-CAD for Undegraduate
Speaker and Demonstrator 2007
12 SAR-EAC Report for Bachelor of Mechanical and Manufacturing Engineering
Member 2009
b. Technical Reviewer (Selected)
No Journal/Conference Designation Duration
1 Materials and Design
Reviewer 2005- to date
2 Material Processing and Technology
Reviewer 2001-To date
3 Alloys and Compound
Reviewer 2014- to date
4 ICAM2E, Conference
Technical Reviewer 2013
5 Ain Shams Engineering Journal Reviewer 2013-to date
Page 53/62
6 Machining Science and Technology
Reviewer 2012- to date
7 Journal of Mechatronics
Reviewer 2008-to date
8 Journal of Petroleum and Gas Engineering
Reviewer 2010- to date
9 Journal of ISSAAS
Reviewer 2011- to date
10 IEM Journal of Institute of Engineer Malaysia
Reviewer 2001-to date
11 Key Engineering Material 2010
Reviewer 2010
12 World Engineering Congress 2010, Serawak
Technical Reviewer 2010
13 NSPM 2009, National Symposium of Polymeric Materials
Technical Reviewer 2009
14 World Engineering Congress 2007, Penang
Technical Reviewer 2007
c. Examiner/ Evaluator
PhD External Examiner (International)
No Title Name Univ. Year
1.
Numerical and experimental investigations on forming limit analysis for AISI 316, 316L and 316LN austenitic stainless steel
Ramados Anna, India
2008
2. Mechanical alloying, spark plasma sintering and characterisation of Fe-Ni nanopowder
T. Ashokkumar Anna, India
2011
3.
Theoretical and experimental studies on evaluation of friction factor in extrusion process of AA6063 and AA6063/SiCp composites
V. Jayaselan Anna, India
2013
4. Experimental Investigation on drilling of polymer matrix composites and GFRP/Aluminium stack
R. Raja Anna, India
2015
5.
Significance of equal channel angular pressing parameters on the structural enhancement of commercial purity copper
A.T. Vijaya Shakrhivel Anna, India
2015
6. Optimization of process parameters of dissimilar aluminum joint by friction stir welding
Sabitha Jannet Anna, India
2016
PhD External Examiner (National)
No Title Name Univ. Year
1.
Microstructures and Mechanical Properties of Aluminium-Silicon Bar Produced by net shape Casting Process
Dodi Proyitno UTM 2001
2. Numerical and Experimental Analysis of Powder Md Mujibur Rahman UKM 2001
Page 54/62
Compaction Process
3. Prehated machining of hardened steel AISI D2 and optimization of parameters
Mohd Amri Lajis IIUM 2009
4. Development of Metal Injection moulding Khairul Rijal Jamaluddin
UKM 2009
5. Effect of Surface roughness on micro-idententation Chuah Hun Guan USM 2012
6. Optimization process on Powder injection Moulding Nur Hafiez Mohamad Nur
UKM 2012
7.
Optimization of machining processes by using criteria of maximum productivity and Mionimujm cost
Aead M. Ahmed UNIMAP 2012
8. Design and Development of impeller Wind Turbine Ahmaed Younus Qasim
UNIMAP 2012
9. Pendekatan kawasan kerja untuk meramalkan pembidas bagi jasad putih automotif bahagian dibentuk
Nagur Aziz Kamal Bashah
UKM 2013
10.
Theoretical modelling of process performance in micro-electro-discharge machining for nonconductive ceramics
Abu Naim Muhammad Abdus Sabur
IIUM 2014
11. Modeling of processing condition for polypropylene-nanaclay integral hinges at high heat exposure,
Mohd Hilmi Othman UTHM 2015
12. Effect of tool path strategies on machining performance
Muhammad Riza IIUM 2015
13. Mahalanobis- Taguchi system as a decision making tool for remanufacturing automotive component
Mohd Yazid Abu UTM 2015
14. Pembangunan Aloi aluminium untuk pemprosesan logam separa pepejal
Mohd Shukur Salleh UKM 2015
15.
Penghasilan kelli tahan karat berbusa melalui kaedah pengisi pemegang ruang-pengacuanan suntkan logam
Tan Koon Tatt UKM 2015
16.
Effect of substrate thickness layer on the mocrostructure , mechanical and wear properties of AlTiN layer coating deposited on Tungsten Carbide insert cathodic arc PVD technique
Kamil Jawad Kadhim UTeM 2015
Master External Examiner (National)
No Title Name Univ. Year
1. Analysis of Flow Phenomena in Metal Injection Moulding Process
Nor Hafiz Mohamad Nor
UKM 2001
Page 55/62
2. Static and Dynamic Analysis of a Drawing Die Sethuraman s/o Vatiapan
UM 2000
3. Evaluation of cost effective of Manufacturing Processes for producing Metal implant
Mohamad Tarmizi Omar
USM 2002
4.
Kajian Eksperimen dan Komputer bagi perolakan tabir di atas permukaan isoterma dan bukan-isoterma pada perbezaan sudut condong
Sii Tuong Ngan USM 2003
5. Effects of induced damages on the flexural fatique behaviour of glass fiber reinforced epoxy (GREs)
Wong Teck Kai UNIMAS 2003
6. Numerical simulation failure of steel plates impated by blunt nose projectiles using pam shock
Faidzuli bin Ismail USM 2004
7. Development of a computer aided die design system (CADDS)
Azuddin Mamat UM 2004
8. Pemprosesan Selari Dalam Simulasi Perambatan Retak Menggunakan Kaedah Induk-Pekerja
Choy Hau Yan UKM 2004
9. Heat transfer of compact heat exchanger Shamsul Bahari bin Azraai
USM 2005
10. Optimal design of femoral hip prosthesis using topology optimisation to reduce stress shielding
Mohamad Ikhwan Zaini bin Ridzwan
USM 2005
11. Failure Analysis of Low-Velocity impact on composite plate
Muhammad Zulkarnain
USM 2005
12. Thermal Management of both component and system levels in Elctronics Packaging
Ong Kean Aik USM 2006
13. Prediction of microelectronics encapsulation process using finite difference method
Mohammad Khalil Abdullah
USM 2006
14. The relationship between the applied torque and stresses in post-tension structures
Liew Fui Kiew UNIMAS 2006
15.
A study on the effect of different solder constitutive models on the life time estimation of Lead-Free Solder joint using finite element method.
Abdullah Aziz Saad USM 2006
16. Kerlakuan aliran dalam process pengacuan suntikan logam.
Norazizah Ma’som USM 2007
17. Kajian eksperimen dan berangka bagi dua pakej PLCC dipasang debaris secara mengufuk.
Sharupuddin Yusoff USM 2008
18. Design and geometric optimization of an axial ventricular assist device for reduced blood shear stress
Dhyaa Hadi Hussein, USM 2009
19. Design and analysia of mechanical mating interfaces for reconfigurable machine tool
Normariah Che Maideen
USM 2010
20. Product design and development
Salina Budin USM 2011
Page 56/62
21. Thermal effect on packaging process
Ahmad Razlee USM 2011
22. Development of tool and jig of machining
Mazlan Mohamed USM 2011
23. Development of packaging device
Khaleed Hussein USM 2011
24. Numerical Method for Chip Flip Packa Mior Firdaus Mior Abdul Majid
USM 2012
25.
Development of multi-component device loads, torque and temperature measurement for Friction Stir Welding Process
Jauhari Tahir Khairudin
USM 2012
26. Effect of moisture on ABS Filament material for FDM Rapid Prototyping
Siti Nur Amalina Mohd Halidi
USM 2013
27. Thermal performance analysis and characterization for mobile radio
Chee Jiunn Shyong USM 2013
28.
Effect of variable helix and pitch tool geometry on the process damping performance in End milling processes
Muhammad Adib Shaharun
UMP 2014
29. Development of Natural fibre composite for engineering application
Nurul Farah Adibah Mohd
UTeM 2014
30.
Experimental and Statistical analysis for surface modification of steel and cast Iron using Nd:YAG Laser
Fazliana Fauzun UMP 2015
31. Surface roughness optimization (Opsurf) in Milling Operation of Polyurethene Block
Louis Denis Kevin UNIKL 2015
32. Effect of injection moulding parameters on warpage deflection
Siti Salamah Mohd Sani
UTeM 2015
33. Thermal response on nanofluids in the presence of magnetic field with variable stream condition.
Vibhu Vignesh Balachandar
UTHM 2015
Examiner of MSc/PhD Universiti Putra Malaysia
No Name Title Type Year
1. Sepide Najafian (GS16329) Productivity of Flexible Manufacturing Cell by Implementing Different Maintenance Policies,.
Internal 2008
2. Maryamalsadat Vafa (GS18176)
Visualing supply chain using social network analysis in project based industry.
Internal 2009
3. Aghdas Naimi Sadigh (GS22476)
Developing a model for supplier selection based on loss functions
Internal 2009
4. Giwa Solomon Olanrewaju (GS19097)
Investigation of the potential of egusi melon (colocynthis Citrullusl.) seed oil as diesel fuel substitute.
Internal 2009
Page 57/62
5. Mahshid Sadat Abtahi Foroushani (GS20207)
Development of an innovative algorithm for the travelling salesman problem (TSP)
Internal 2010
6. Yaaseen Rafeeu (GS20559) Factors of maximizing solar fraction under wet climate environment,
Internal 2010
7. Wang Bin (GS18190) Prediction of Turning machine degradation status based on vibration data using back propagation (BP) Neural Network
Internal 2010
8. Hamidreza panjehfouladgaran (GS 19844)
Development and performance evaluation of mobile traffic infraction registration system,
Internal 2010
9. Reza Raminfar (GS19818) 2010
Development of an integrated model for production planning and cell formation problem in cellular manufacturing system
Internal 2010
10. Taravatsadat nehzati (GS25201)
Production scheduling of reconfigurable manufacturing systems using fuzzy logic technique
Internal 2012
11. Reza Afshar Hosseinabadi (GS20884)
Auto Generation and Auto Adjust of the center of gravity of tabular structure during crush deformation
Chairman 2009
12. Syahrul Azwan bin Sundi @ Suandi (M050810004) - UTHM
Simultaneous Five-Axis Machining on the Wall cutting of curved shape component
External 2010
13. Oon Cheen Sean (KGA 100039) - UM
A Computational simulation of heat transfer to turbulent separation fluid flow in a concentric pipe.
External 2012
14. Nurul Husna binti Mohd Nawawi - UTEM
Optimisation of cutter geometrical feature for machining orthopedic, trauma and spinal biomaterials implant
External 2015
15. W noor Fatihah binti W Mohamad – Unisza (PS0287)
Machining parameters optimization for trimming operation in milling machine using two level full factorial design
External 2015
ACCREDITATION EXERCISE UNDER MALAYSIA QUALIFICATION AGENCY (MQA)
No Institution Level Year Designation
1 City Univ. College of Science and Technology
Bac. Of Engineering Management (Hons) PA0453
Nov 2015 Chairman
2 UMP Master of Industrial Engineering PA5041
June 2014 Panel
3 KDU College Penang Campus E.Eng (Hons) Mech Eng. PA4957 Nov 2014 Panel
4 Lincoln Univ. College Bac. Of Tech. in Mech. Eng PA4387 Dec 2013 Chairman
5 GMI- UMP Bac. Of Eng. Tech (Manufacturing) PA2290
May 2013 Chairman
Page 58/62
6 KOLEJ ANTARABANGSA TEKNOLOGI & PROFESIONAL
Dip. Tech. Mechanical (Gas) PA April 2013 Chairman Panel
7 UNITEN MS Mechanical Eng. PA9733 April 2013 Panel
8 UTHM MS Manuf. Eng PA3097 Dec 2012 Panel
9 UNISZA B. Manuf. Tech (Prod. Design) PA3118
Dec 2012 Panel
10 UNIMAP B. Mech Eng PA2969 Dec 2012 Chairman Panel
11 UNIKL M.Eng Tech (Manuf.) A8065 Sept 2012 Chairman Panel
12 UMP M Mech Eng PA1980 Apr 2012 Panel Member
13 TATI B Manuf. Eng. Tech (Prod. Management PA2033
Apr 2012 Panel Member
14 UTeM MS Mech. Eng (Energy Eng) PA1498
Dec 2011 Chairman
15 UTeM MS Mech. Eng (Energy) PA1495
Dec 2011 Chairman
16 UTeM M Mech. Eng (Product Design) Nov 2011 Panel Member
17 UTP MS Mech. Eng A8048 PhD Mech Eng A8419
July 2011 Chairman
18 TATI B Manuf. Eng. Tech (Tooling) A8985
Jun 2011 Chairman
19 IPROM UNIKL BEngTech Manuf. System A8783 May 2011 Chairman
20 UTeM BTech Manuf. Eng (Product Design) PA0701
May 2011 Panel Member
21 UTeM BTech Manuf. Eng (Process and Tech) PA0700
May 2011 Panel Member
22 IPROM UNIKL BEngTech Tool and Die A10135 Feb 2011 Chairman
23 UTHM BTech Mech. Eng (Manuf) PA0714 April 2011 Panel Member
24 UC Linton BEng Mech. Eng. PA0410 March 2011
Panel Member
Page 59/62
25 UNIMAP MS Manuf. System Eng PA0513 Feb 2011 Panel Member
26 City UC of Science and Tech BEng Management PA0453 Feb. 2011 Panel Member
27 IPROM UNIKL BEngTech Prod. Design A10835 Feb 2011 Chairman
28 MMU MEng. Advanced Manuf. Eng A5835
April 2010 Chairman
29 UC SEGI Subang Jaya BEng Mech Eng collaboration with Univ. of Sunderland A7814
April 2010 Chairman
30 UC SEGI Damansara BEng Mech Eng collaboration with Univ. of Sunderland A7451
July 2010
Chairman
31 UNIMAP BEng (Manuf. Eng) AA0361 BEng (Mech. Eng) AA0365 BEng (Prod. Design) AA0364
May 2010 Panel Member
32 UNIMAP BEng (Metallurgical Eng) AA0363 BEng (Materials Eng) AA0362
May 2010 Chairman
33 Univ. of Nottingham in Malaysia (UNIM)
BEng (Mech Eng) A10469 May 2009 Panel Member
34 UNIKL-MFI BEngTech Mechatronics KR10026 March 2009
Panel Member
35 KLIUC Dip. Mech. Eng A5270 Nov. 2009
Chairman
36 UNITEN MS Mech Eng KA9733 Nov 2008 Panel Member
37 College of WIT HND Mech Eng A3197 Jun2008 Chairman
38 OUM Dip. Mech Eng. A5716 August 2008
Panel Member
39 OUM Bac. Manuf. Management KA9206 Jun2008 Panel Member
40 International UC INTI UK Degree Transfer Programme – Mech Eng A8338
April 2008
Panel Member
Page 60/62
41 Int. UC Tech Twintech M. Mech and Manuf. Eng KA8018 Feb 2007 Panel Member
42 WIT College Dip. Mech Eng. A3037 HND Mech Eng A3197
July 2007 Panel Member
43 UTP PhD Mech Eng KA8419 Aug 2007 Panel Member
44 UniKL-MSI BTech Mech. Eng (Automotive) KA8201
June 2007
Panel Member
45 KLIUC BTech Applied Automotive KA8381 July 2007 Panel Member
46 UNITEN MS Mech Eng. KR8589 Aug 2007 Panel Member
47 UNIKL- Kampus Kota BEng Tech Manuf. System KA8783 Oct 2007 Chairman
48 UNITEN MS Mech. Eng A1186 April 2006
Panel Member
49 SEGI College Subang Jaya B.Eng Mech. Eng. KA7451 June 2006
Panel Member
50 UniKL- MFI Dip. Tech Welding Eng. A1481 May 2006 Chairman
51 PSDC Dip. Mech/Mechatronics Eng. KA5716
Sept 2005 Panel Member
52 Ins. Teknologi Kulim Dip. Design Eng. (Mekanikal) March 2004
Panel Member
53 WIT College Dip. Mech Eng SM3037 May 2004 Panel Member
54 GMI Dip. Prod. Tech KA5787 Dec 2004 Panel Member
55 UniKL - MFI Dip Eng Tech (Welding) KN5139) May 2004 Panel Member
56 TPM Academy BS (Eng) Aug 2004 Panel Member
Page 61/62
57 UNITEN PhD in Engineering 2002 Panel
58 Kolej Tafe Seremban Dip. Electro-Mechanical Eng 2002 Panel
59 Inst Teknology Jaya/Univ. of Wales College Newport
B.Eng (Hons) Integrated Manufacturing Tech
2002 Panel
60 L&G Twintech Ins. Of Technology Dip. Mechanical Eng 2000 Panel
d. Professional Affiliation No Detail
Designation Duration
1 Board of Engineers Malaysia (BEM) Registered Engineer 13986 Since 1989 2 ASME Member Since 2001 3 The Institution of Engineers (IEM) Graduate Member M15210 Since 1992 4 New York Academy of Science Member Since 2001 5 Persatuan Pegawai Akademik Member 1995-Present