In the inspector window we can see that the data source is internal we need to change this to control

In the inspector window we can see that the data source is internal we need to change this to control

Change data source to control

Change data source to control

Help on data source in companion

Help on data source in companion

Control I/O iconControl I/O icon

Select ethernetSelect ethernet

Configure I/O set IP address

Configure I/O set IP address

Add number of slots

Add number of slots

Add modules to slot

Add modules to slot

From the tools folder we need to use the set IP address utility

From the tools folder we need to use the set IP address utility

We will now create a new Target that will hold our NIU configuration.

We will now create a new Target that will hold our NIU configuration.

Configure the IP address we have already set and add the required modules

Configure the IP address we have already set and add the required modules

Right click hereRight click here

Right click and configure the EBI

Right click and configure the EBI

Double click here and enter IP address

Double click here and enter IP address

Match these settings to your PC

Match these settings to your PC

Red crosses mean we still have discrepancies and will not be able to download

Red crosses mean we still have discrepancies and will not be able to download

Set to 1Set to 1

Set to 1Set to 1

Download configuration to NIU and power cycle the NIU

Download configuration to NIU and power cycle the NIU

Drag from hereDrag from here

To hereTo here

Map our variables to our hardware

Map our variables to our hardware

Select hereSelect here

Drag to here to include all new rungs

Drag to here to include all new rungs

Add a little more logic

Add a little more logic

Drop the highlighted logic to directly over the ladder element of our class

Drop the highlighted logic to directly over the ladder element of our class

Download ProjectDownload Project

Check feedback zone for download progress

Check feedback zone for download progress

We can see “Latch1” now reflects our changes

We can see “Latch1” now reflects our changes

Grab parts from toolchestGrab parts from toolchest

See a preview of the part you want

See a preview of the part you want

Graphics may need transparency setting changed

Graphics may need transparency setting changed

Look into the property inspector

Look into the property inspector

All navy elements are now transparent

All navy elements are now transparent

Duplicate these pipes(right click)

Duplicate these pipes(right click)

Drag and drop hereDrag and drop here

Double click rectangle set properties

Double click rectangle set properties

Drag and drop all elements over the graphic in our toolchest

Drag and drop all elements over the graphic in our toolchest

When we bring in a linked copy we are prompted for a name of our existing logic with which to associate it

When we bring in a linked copy we are prompted for a name of our existing logic with which to associate it

Each tank is completely independent of the others

Each tank is completely independent of the others