program - insatech€¦ · expanded our program selection to include seminars ... fundamentals of...

Mennesker - Ideer - Løsninger

Insatech A/S • Algade 133 • 4760 Vordingborg • Tlf. +45 5537 2095 • www.insatech.com • [email protected]

PROGRAM2 exciting conference days in Odense Congress Center

18-19 March, 2014

2 3

Each of the 2 days have a program that is specifically targeted to the selected industries.

Proces Dage 2014 www.procesdage.com

• Proces optimisation • Instrumentation • Safety and Environment

18-19th of March, 2014Place: Odense Congress Center Ørbækvej 350, 5220 Odense

Tuesday 18th of March 2014The seminars are tailored to the following industries:

• Pharmaceutical• Biotech• Food & beverages• Grain and foodstuffs • Ingredients

Wednesday 19th of March 2014The seminars are tailored to the following indu-stries:

• Power• Combustion plants• Biofuel• Biological gas• Oil & Gas• Chemistry

We are pleased to bid a warm welcome to our Danish customers during this conference and exhibition in 2014.

All seminars will last for 1 hour and throughout these sessions, we will give you an introduction to the topics and cover the possibilities for optimising the process measurements, calibration procedures, maintenance procedures etc. Many of the topics will require a longer session to cover all details for the specific topic. By subsequently signing up for a general course in pH, conductivity, flow or level measurement or a course specifically designed for your company, it is possible to get a deeper insight into the chosen topic.

Insatech A/S has been in the process instrumentation and technical solutions industry for close to 25 years, and we would like to share our knowledge with our customers. During the last couple of years we have seen a growing interest in the instrumentation courses we offer. We realise that knowledge sharing and supplementary training in the market for instrumentation and measurement technology is increasing in general.

We are convinced that deep insights into applications and measurement solutions are essential to process optimisation and to ensure quality and cost-effectiveness.

Our product portfolio is continuously expanding, and we cooperate with professional and internationally reputable business partners, who complement the existing instrumentation program, to ensure that our customers have the optimal solutions.

During the later years we have expanded our Service- and System Department due to our successful new solutions e.g. accredited calibrations, mobile calibration rigs, bunker systems and other solutions for Danish and foreign customers, where we handle the complete job from the consultancy, design, installation, commissioning and training of the end users.

As you can see from the Process Days 2014 program we have expanded our program selection to include seminars on solutions for power plants as well as the off shore industry in particular.

In the exhibition area you will have the opportunity to talk to our Technical staff from, the Sales-, Service- and System Department and you will have the chance of a direct dialogue with our suppliers, who are experts within their respective product areas.

8:30 Arrival and registration. Coffee in the exhibition area

9:00 Welcome in the exhibition area by Managing Director Alan Christoffersen

Guest Speaker Ernst Madsen Technology Specialist, Automation & Industrial IT

The topic is how poor instrumentation leads to erroneous decisions and how to optimize the process by using the correct equipment.

Price 1.400,- each person/per day (ex VAT)

Including entrance to the exhibition area, up to 4 seminars per day and a light buffet lunch.Registration for the specific seminars is necessary. You will be invoiced upon registration.Late cancellation – 30 days or less prior to the event: No refund.

Participation both days incl. accomodation and meals 4.000.- each person (ex VAT)

Deadline 4th of March 2014.

VEGA – global manufacturer of instruments and solutions for level measurement.

Yokogawa – global manufacturer of flow meters, pressure transmitters,

data acquisition, analysers and DCS systems, MES and safety systems.

GE-Sensing – manufacturer of pressure calibration instruments for use in process

and laboratory.

Optek - manufacturer of in-line sensors for concentration measurement: colour, UV, OD, NIR and turbidity.

Bronkhorst Cori-Tech - manufacturer of massflow meters and dosing systems for liquids.

Hamilton - manufacturer of transmitters and sensors for pH, oxygen

and conductivity measurement.

Bronkhorst – High-Tech - manufacturer of mass-flow meters and controllers for gasses and liquids.

Systech Controls - manufacturer of averaging pitot tubes, and flow computers for flue gas,

gas, liquids and steam.

Aber Instruments - manufacturer of biomass measuring instruments: In-line measurement of viable

cells and cell diameter in the fermentation process. Biotech, Pharmaceutical and Brewery industries.

Flexim - manufacturer of ultrasonic Clamp-On flow meters and refractometers.

TechCare ApS – course and consultancy firm focusing on the ATEX regulations.

Exner Process Equipment - manufacturer of armature og styringer til liquid analysis.

GE Analytical Instruments leading manufacturer of instruments for TOC (Total Organic Carbon)

measurements in ultrapure water.

Insatech – one of the leading suppliers of in the instrumentation and automation

business including complete solutions.

Insacal – accredited laboratory for calibration of conductivity and temperature instruments.

GE Oil & Gas - manufacturer of valves for Oil & Gas and Power Industry.

Binder - manufacturer of flow meters and gas analysers for biological gas.

Insacal – accredited laboratory for calibration of conductivity and temperature instruments.

SensoTech - manufacturer of instruments for in-line measurement of concentration,

crystallisation etc. with sonic velocity.

Develop, apply and communicate research and technology-based knowledge to

the Danish industry.Registration form on page 11

4 5Subject to change Subject to change

Kl. 09.30-10.30 • Seminar TI-01 Kl. 09.30-10.30 • Seminar TI-05


18 MARCH 2014Industries:Pharmaceutical • Biotech • Food & Beverages • Grain & Foodstuffs • Ingredients







Languade: DanishPresenter: Kristian Nielsen, Insatech

Reliable and accurate flow measurement with Clamp-OnSwitch from mechanical to Clamp-On flow measurementWe will cover a long range of applications such as; Discharge water, Power plant applications, Offshore and Refinery. The trend is quite clear; for certain applications, measurement from outside is the preferred option. By using a Clamp-On flow meter device, a high level of accuracy can be reached. Less joints, and no leakage which can prove dangerous to the environment, as well as unwanted holes in the pipes. Furthermore this is a sound economical solution.• No maintenance, no downtime due to installation, assembly can be done

during operation• The solution has low installation cost.• A suitable solution for applications with high pressure .

Language: DanishPresenter: Martin Søvind Jensen and Jacob Steffensen, Insatech

Flow measurements - in generalChoosing the correct measuring principle and subsequent dimensioning is often very challenging.

This seminar will provide a short introduction into the various flow termi-nologies, measuring principles, usability, and pros and cons for each solu-tion.

We will focus on the correct dimensioning, assembly and installation of flow meters.

This seminar will put you in a position to make the right choice when it comes to flow metering!

Language: DanishPresenter: Larry Cottrell and Ruben Falk, Insatech

Calibration in practice - Part IIntroduction to the execution of calibration and choice of reference equip-ment.

This seminar will give you an overview of the various terms of calibration, traceable versus accredited and advice on how to analyse specifications/accuracy.


Calibration in practice - Part IIFundamentals of calibration, set-up of routines

Amongst other things we will cover the following: Quality control related to own routines as well as reference equipment/reference laboratory calibration.

• The environmental influence on calibration• Risk budgeting• Experiences from calibration laboratory at Insatech

Language: DanishPresenter: Sarah Omø Nielsen, Insatech

pH MeasurementspH measurement is well known, but generally considered quite complicated.

This seminar will cover theory as well as the practical challenges in this area.

The most important issue is how to secure correct pH measurement, with a minimal maintenance effort.

Some possibilities are covered in this seminar, so you know what to look out for.

Language: DanishPresenter: Søren Skovhus, Insatech

Instrumentation in practiceThis seminar will provide you with an overview of the typical errors and challenges, which could be encountered during service visits to the process plants.

Often small things can create problems for flow- level or analytical measu-rements, e.g. if the assembly has not been done correctly to begin with.

We will provide examples of solutions to problems encountered on a daily basis, incl. correct assembly as well as preventive maintenance.

Language: DanishPresenter: Sarah Omø Nielsen and Michael Tarby, Insatech

Measuring conductivity in clean and ultrapure waterCorrect measuring of conductivity in ultrapure water can be very challenging. If the measurements fail, great values are at risk (Kettle, combustion plants and costly products) and it is extremely important to choose measuring equipment which has build-in surveillance of error messages.

This seminar will provide you with an overview of the pitfalls you are likely to encounter and put you in a position to better define requirements for any equipment.

Correct assembly and calibration incl. any other challenges you might encounter, will be covered in this seminar as well.

Language: DanishPresenter: Morten Olsen, Insatech

Continuous level measurementIntroduction to the optimal measurement instrument for specific level tasks.Primary focus on radar, ultrasonic and guided microwave. • Which requirements can be defined? • What are my options?• Correct choice of measurement instrument as well as actual placement/as-

sembly, which can lead to significant savings in time and money.

Language: DanishPresenter: Morten Valhøj Kristensen, Insatech

Building dose/blending systemsGas/gas - Gas/LiquidGet a complete overview of the possibilities of building dosing and batch blending systems with more components, and how mass flow meters can aid the process of blending gasses and additives.

The functionality of good mass flow meters with high precision at low flow velocities, has opened up for many new possibilities in the process.

Application examples will be presented within the areas of: Batch /blending systems for liquids with more components and batch/blending systems for gasses as well as blending systems for liquids incl. additives and trace elements.

Language: EnglishPresenter: Achim Kovar, Optek

Process optimisation with inline photometersGet an overview of inline UV, VIS and NIR solutions for optimization of your process. Introduction to the typical process that can be optimized such as phase seperations, filter monitoring, product concentration, product contamination etc.

By implementing simple inline solutions your process can be optimised and provide higher net profit, higher operational reliability as well as higher pro-duct quality.

Language: DanishPresenter: Kenneth Rasmussen and Christian Bach, Insatech

Optimising phase separations and CIP processesThis seminar will give you an insight into possible savings both in use of chemicals as well as lost product by automating the process. Flow meters and time based water flush are still a very common practice, and often results in loss of product. In-Line equipment can secure a stable process with the correct concentra-tion of chemicals, adequate CIP, minimal loss of product and reduced water consumption Focus will be on following measuring principles: • Photometers• Conductivity • Sonic velocity• Refractive index

Language: DanishPresenter: Anders Nielsen, Diploma Master Brewer -

Stud. M.Sc.Eng. Biotechnology and Kenneth Rasmussen, Insatech

Online measurement of viable cell concentrationA presentation consisting of two parts where the first will be an introduction and overview of online measurement of viable cells and OD regarding mammalian cells, yeast and E. coli. This will be followed by a practical study and insight into online yeast monitoring with the ABER Compact by Anders Nielsen, Diploma Master Brewer from the Scandinavian School of Brewing and M.Sc.Eng. Biotech. student. The increasing demand for higher consistency and automation of yeast management has resulted in a significant interest within “Dielectric RF Impedance”. The main focus of the study will be the application of ABER Compact Yeast Monitor for pitching and will include information on the system process economics. Verification will be presented via trend graphs from the online monitoring together with capability assessment, waste yeast investigation etc. The study was a collaboration project between ABER Instruments Ltd and a larger brewing group.

Language: DanishPresenter: Kenneth Rasmussen, Insatech

Moisture measurements with NIR (Near Infrared)This seminar presents an overview of the possibilities available for cost reduction as well as improving product quality by automation in drying processes. By implementing an inline NIR moisture analyzer, your drying process can easily be optimized. The advantages of using an inline NIR analyzer for moisture measurements are as follows: • No sampling required and no time consuming laboratory analysis needed • Avoid excess drying and minimize energy consumption • Achieve consistent product quality • Avoid rejected product and any subsequent processing or re-mixing • Operate close to your limits for moisture content and optimize profit.• For a drying proces the return on investment can be as little as 6-12

months.

Language: DanishPresenter: Erik Fjordside, Insatech

Introduction to DCS systems The Centum VP DCS system from Yokogawa is one of the world leading DCS systems, with thousands of installations and more than 35 years of experience.

We will provide a technical introduction to the Centum VP DCS system by presenting a short case, implementing a small project with 1 project task. • System configuration • Integration • Introduction to programming • Graphical user interface

Language: DanishPresenter: Iben Kyndby, Insatech

Dissolved oxygen Especially in the pharmaceutical industry oxygen is vital for the final result.

Therefore a reliable oxygen measurement is very important to ensure the optimised output of the fermentation.

Introduction to the basic principals including advantages and disadvantages about the measurement principals.

Language: DanishPresenter: Carsten Hounsgaard, Insatech

Data acquisition How to perform stand-alone data collection in the food and pharmaceutical industry.

The requirements for data collection in the food industry are beginning to look similar the ones we have seen in the pharmaceutical industry for many years.

We will evaluate the solutions which are currently available and have a look at the demands required by the authorities.

Knowledge is money for YOUR company.

KL. 12.00-13.00 LUNCH KL. 12.00-13.00 LUNCH KL. 12.00-13.00 LUNCH KL. 12.00-13.00 LUNCH

TUESDAY 18 MARCH 2014Industries:Pharmaceutical • Biotech • Food & Beverages • Grain & Foodstuffs • Ingredients TUESDAY

76 Subject to change

Kl. 09.30-10.30 • Seminar TI-17

Kl. 13.00-14.00 • Seminar TI-19

Kl. 11.00-12.00 • Seminar TI-18

Kl. 14.30-15.30 • Seminar TI-20


On-line Measurement of TOCContinuous TOC (Total Organic Carbon) measurements in ultrapure water, to secure the quality of the water.

Short presentation of theory and measuring principle.

Language: DanishPresenter: Jacob Jensen, Insatech

TOC in practiceThis seminar will cover details regarding the yearly calibration, service and maintenance.

We will go through standards in calibrations, longevity, storage before use as well as spare part replacements.

Finally we will cover handling of raw data from instrument and SL1 data as a unique aid to perfect results.


Calibration of weight scale systems and flow meters for pharmaceutical productionOne of the greatest and more practical challenges in all pharmaceutical productions, is the calibration of weighing systems and flow meters.

We will give you an introduction to practical solutions, experiences and the technology behind.

Language: DanishPresenter: Per Kragh, TechCare

ATEXis an acronym and is derived from “Atmosphère Explosible” (French for explosive atmosphere).

The ATEX regulation is a European directive which requires all heads of organizations to fully understand the risks related to certain explosive environments. The ATEX-regulations protect the employees working with any potentially explosive materials and helps to secure the equipment working in the potentially explosive areas, but only if the regulations are followed. During this seminar you will be given an introduction into the way the ex-zones/plants are classified and how to document and follow the requirements.

KL. 12.00-13.00 LUNCH

18 MARCH 2014Industries:Pharmaceutical • Biotech • Food & Beverages • Grain & Foodstuffs • IngredientsTUESDAY

Exhibition AreaAt the Insatech booth you will meet our Technical staff from the Sales-, Service- and System Department and have the opportunity to have a direct dialogue about the products and complete solutions that we provide. They can also provide advice about the instruments from our suppliers who are not represented at the event. The staff from our Marine Department, Calibration Laboratory and Service-/System Department will be present for a talk about the complete and custom-made solutions that Insatech A/S provide.Feel free to book a meeting with our staff and we will ensure that there is extra time to discuss the right solution for your measurement task. Please contact Dorthe Kronow Trabjerg: [email protected]

We are pleased to bid a warm welcome to you!

Kl. 14.30-15.30 • Seminar TI-21

Language: EnglishPresenter: Jamie Thompson, GE Power & Water

Cleaning ValidationThis seminar will provide guidelines how to use TOC (Total Organic Carbon) for documenting this type of cleaning process control and how to subsequently manage documentation.

8 9Subject to change Subject to change

Kl. 09.30-10.30 • Seminar ON-01 Kl. 09.30-10.30 • Seminar ON-05


19 MARCH 2014Industries: Power • Combustion Plants • Biofuel • Biological Gas • Oil & Gas • Chemistry


Kl. 14.30-15.30 • Seminar ON-04

Language: DanishPresenter: Søren Skovhus, Insatech

Instrumentation in practiceThis seminar will provide you with an overview of the typical errors and challenges, which could be encountered during service visits to the process plants.

Often small things can create problems for flow- level or analytical measu-rements, e.g.. if the assembly has not been done correctly to begin with.

We will provide examples of solutions to problems encountered on a daily basis, incl. correct assembly as well as preventive maintenance.

Language: DanishPresenter: Sarah Omø Nielsen, Insatech

pH MeasurementspH measurement is well known, but generally considered quite complicated.

This seminar will cover theory as well as the practical challenges in this area.

The most important issue is how to secure correct pH measurement, with a minimal maintenance effort. Some possibilities are covered in this seminar, so you know what to look out for.

Language: DanishPresenter: Sarah Omø Nielsen og Michael Tarby, Insatech

Measuring conductivity in clean and ultrapure waterCorrect measuring of conductivity in ultrapure water can be very challenging. If the measurements fail, great values are at risk (Kettle, combustion plants and costly products) and it is extremely important to choose measuring equipment which has build-in surveillance of error messages.

This seminar will provide you with an overview of the pitfalls you are likely to encounter and put you in a position to better define requirements for any equipment.

Correct assembly and calibration incl. any other challenges you might encounter, will be covered in this seminar as well.

Language: EnglishPresenter: Heinz Wöhrle, VEGA

Latest trends in level measurementThis seminar will focus on level measurement primarily within microwave technology, radar and flex radar, where there are a lot of potential and usa-bility within Oil & Gas industry as well as power plants.

Language: DanishPresenter: Lasse Olsen, Insatech

Pressure and differential pressure measurementPressure measurement is one of the most commonly used parameters in the process industry.

It can be used for several types of measurement , i.e. level and flow.

During this seminar we will cover measuring principles, correct assembly as well as usability.

Language: DanishPresenter: Martin Søvind Jensen og Jacob Steffensen, Insatech

Flow measurements - in generalChoosing the correct measuring principle and subsequent dimensioning is often very challenging.

This seminar will provide a short introduction into the various flow terminologies, measuring principles, usability, and pros and cons for each solution.

We will focus on the correct dimensioning, assembly and installation of flow meters.

This seminar will put you in a position to make the right choice when it comes to flow metering!


Non-contact measurement with radiometric measurement such as level and densityDuring this seminar we will go through the possibilities available for the ”impossible tasks” with some of the most reliable radiometric measure-ments in the industry:

• Level measurement• Density measurements• Non contact weight sensors.

The seminar will cover the most reliable measurering options with lowest maintenance effort.

KL. 12.00-13.00 LUNCH KL. 12.00-13.00 LUNCH

WEDNESDAYKl. 09.30-10.30 • Seminar ON-08 Kl. 09.30-10.30 • Seminar ON-12




Language: DanishPresenter: Morten Valhøj Kristensen, Insatech

Building dose/blending systemsGas/Gas - Gas/Liquid

Get a complete overview of the possibilities of building dosing and batch blending systems with more components, and how mass flow meters can aid the process of blending gasses and additives.

The functionality of good mass flow meters with high precision at low flow velocities, has opened up for many new possibilities in the process.

Application examples will be presented within the areas of: Batch /blen-ding systems for liquids with more components and batch/blending sy-stems for gasses as well as blending systems for liquids incl. additives and trace elements.

Language: DanishPresenter: Kenneth Rasmussen, Insatech

Moisture measurements with NIR (Near Infrared)This seminar presents an overview of the possibilities available for cost reduction as well as improving product quality by automation in drying processes. By implementing an inline NIR moisture analyzer, your drying process can easily be optimized. The advantages of using an inline NIR analyzer for moisture measurements are as follows: • No sampling required and no time consuming laboratory analysis needed • Avoid excess drying and minimize energy consumption • Achieve consistent product quality • Avoid rejected product and any subsequent processing or re-mixing • Operate close to your limits for moisture content and optimize profit.• For a drying proces the return on investment can be as little as 6-12

months.


Calibration in practiceIntroduction to the execution of calibration and choice of reference equip-ment.

This seminar will give you an overview of the various terms of calibration, traceable versus accredited and advice on how to analyse specifications/accuracy.

Language: EnglishPresenter: Manuela Charatjan, Binder

Kristian Nielsen, Insatech

Flow and gas analyses of biogas Overview of instrumentation and measuring principles for flow measurement and real on-line biogas analysis.

The seminar will give a detailed introduction to thermal mass flow measurement and how moisture content can be compensated. A gas analyzer, both as a portable version and a fixed version, will also be presented.

Furthermore, applications from biogas production on wastewater treatment plants and from agricultural biogas plants will be presented.

Language: DanishPresenter: John Frederiksen, Teknologisk Institut/

Kristian Nielsen, Insatech

Flow measurement with Clamp-On ultrasonicUltrasound clamp-on flow measurement can be used for both liquid and gas flow measurement and has a huge potential for non-contact, flexible and mobile flow measurement for gas and liquid flow in different installations.

This seminar will cover some of the challenges as well as give examples of how to use the clamp-on flow meter, its reliability and precision and which applications are relevant to be likely to replace a traditional solution.

Furthermore we will cover details on what the user should focus on, such as media parameters, positioning and placement of transducers and pipe material.


Continuous level measurementIntroduction to the optimal measurement instrument for specific level tasks.Primary focus on radar, ultrasonic and guided microwave. • Which requirements can be defined? • What are my options?• Correct choice of measurement instrument as well as actual placement/

assembly, which can lead to significant savings in time and money.


What is SIL? High-end SIL solutions and introduction to functional safety.

Do you have a process plant, where safety is an issue?

Then you should not miss this seminar.

You will get an introduction to the Functional Safety principles and as well as a detailed introduction to the concepts of process safety.

We will present the standards from a practical point of view.

Language: DanishPresenter: Per Kragh, TechCare

ATEXATEX is an acronym and is derived from “Atmosphère Explosible” (French for explosive atmosphere). The ATEX regulation is a European directive which requires all heads of organizations to fully understand the risks related to certain explosive environments.The ATEX-regulations protect the employees working with any potentially explosive materials and helps to secure the equipment working in the potentially explosive areas, but only if the regulations are followed. During this seminar you will be given an introduction into the way the ex-zones/plants are classified and how to document and follow the requirements.

KL. 12.00-13.00 LUNCH KL. 12.00-13.00 LUNCH

19 MARCH 2014Industries:

Power • Combustion Plants • Biofuel • Biological Gas • Oil & Gas • Chemistry WEDNESDAY

1110 Subject to change

Price 1.400,- each person/per day (ex VAT)

Please sign up directly by mail: [email protected] - or copy and send by fax: +45 5537 7018Download program in Danish and English including registration on www.procesdage.com

Including entrance to the exhibition area, up to 4 seminars per day and a light buffet lunch.Registration for the specifi c seminars is necessary. You will be invoiced upon registration.Late cancellation – 30 days or less prior to the event: No refund.

Participation both days incl. accomodation and meals 4.000.- each person (ex VAT)

Deadline 4th of March 2014.

Company:

Address:

Telephone:

Order No.

Participant:

Participant:

Participant:

E-mail:

E-mail:

E-mail:

Participant:

Participant:

E-mail:

E-mail:

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Seminar No.

Tuesday 18.03.2014

Tuesday 18.03.2014

Tuesday 18.03.2014

Tiuesday 18.03.2014

Tuesday 18.03.2014

Wednesday 19.03.2014





Registration for seminars - Proces Days 18-19th March 201419 MARCH 2014Industries: Power • Combustion Plants • Biofuel • Biological Gas • Oil & Gas • ChemistryWEDNESDAY

ØRBÆKVEJ

HAL A

ARENA FYN

HAL C

HAL B

OCC

HOTEL

LILLE TORNBJ.VEJ

PARKERING

PARKERING

PARKERING

PARKERING

PARKERING

PARKERING

INDGANG VEST

INDGANG

NORD 2

INDGANG

SYDINDGANG

ØST 2

INDGANG

NORD 1

INDGANG

ØST 1

LILL

E TO

RNBJ

.VEJ

RING 3

INDKØRSEL SYD

INDKØRSEL NORD

LILL

E TO

RNBJ

.VEJ

MOTORVEJSKRYDSODENSE

OCC-facts:• 5 minutter til motorvej• 15 minutter til hovedbanegården• Gratis P-pladser• 4-stjernet hotel med 102 enkelt/dobbeltværelser og 7 store suiter• Moderne AV-udstyr• Enestående køkken

* 1. og 2. sal

* 1. sal *

*

Trap pe

Trappe

TrappeOp-/nedga

ng

TrappeOp-/nedgang

Trappe

Danmark

HOTEL

NOIT

PECE

R

V

Café

Info

Hal A

V

V

2 3 54 6

7

8

9

10

11

tnar

uats

eR

t eni

baC

SjællandGalleri Jylland Fyn

Port A

Porte

Port

H D

Bar

INDGANGVEST

INDGANGSYD

INDGANG

ØST 1 ØST 2INDGANG

INDGANG

TekniskInformation

AB

CD

Trappe

Trappe

Trappe

Trappe

Trappe

Trappe

T r a p p eT r a p p e

T r a p p e

T r a p p e

T r a p p e

T r a p p e



T r a p p e

T r a p p e

EE

FG

HI

K K

22

23

21

26

Foyer

24

H

Svendborg Bogense

HOdense

Middelfart Assens Fåborg Nyborg Rudkøbing

”Tankeplads og råderum i hjertet af Danmark” Odense Congress Center tilbyder et unikt totalkoncept. Vi er det eneste sted i Danmark, hvor konference, messe, hotel og restaurant er samlet på ét sted. Det giver såvel arrangører som gæster flere udfoldelsesmuligheder – og et større totaludbytte.

RESTAURANT

HOTEL OG RECEPTION

MESSEHALLER

KONFERENCE- OG

MØDELOKALER

Trap pe

Trappe

TrappeOp-/nedga

ng

TrappeOp-/nedgang

Trappe

Danmark

HOTEL

NOIT

PECE

R

V

Café

Info

Hal A

V

V

2 3 54 6

7

8

9

10

11

tnar

uats

eR

t eni

baC


Port A

Porte

Port

H D

Bar

INDGANGVEST

INDGANGSYD

INDGANG


INDGANG

TekniskInformation

AB

CD

Trappe

Trappe

Trappe

Trappe

Trappe

Trappe


T r a p p e

T r a p p e

T r a p p e

T r a p p e



T r a p p e

T r a p p e

EE

FG

HI

K K

22

23

21

26

Foyer

24

H

Svendborg Bogense

HOdense


Trap pe

Trappe

TrappeOp-/nedga

ng

TrappeOp-/nedgang

Trappe

Danmark

HOTEL

NOIT

PECE

R

V

Café

Info

Hal A

V

V

2 3 54 6

7

8

9

10

11

tnar

uats

eR

t eni

baC


Port A

Porte

Port

H D

Bar

INDGANGVEST

INDGANGSYD

INDGANG


INDGANG

TekniskInformation

AB

CD

Trappe

Trappe

Trappe

Trappe

Trappe

Trappe


T r a p p e

T r a p p e

T r a p p e

T r a p p e



T r a p p e

T r a p p e

EE

FG

HI

K K

22

23

21

26

Foyer

24

H

Svendborg Bogense

HOdense


You will fi nd Odense Congress Center here:

Kl. 09.30-10.30 • Seminar ON-16

Kl. 13.00-14.00 • Seminar ON-18

Kl. 11.00-12.00 • Seminar ON-17

Language: EnglishPresenter: Alain Armand, Masoneilan

Valves for the Oil & Gas IndustryIt is always a challenge to choose the most suitable design of control valve for severe service applications in Oil & Gas industry where high pressure drops, multiphase fl ows, foreign particles and corrosive fl uids are involved.

The different technologies available on the market will be shown with strength and weak points of each solution.

Language: EnglishPresenter: Alain Armand, Masoneilan

Valves for the Power IndustrySome severe service applications in Power industry are requiring customized engineered designs.

The different technologies available on the market will be shown with strength and weak points of each solution.

Language: DanishPresenter: Kristian Nielsen, Insatech

Flow measurement in dusty and wet gassesFlow measurement for fl uegas, primary and secondary combustion air, OFA air and ordinary ventilation air.

The following live applications will be covered: • Replacement of venturi measurements on primary air with subsequent

energy savings• Replacement of Venturi meters in an OFA system, where better accuracy

and air control have been achieved• Flow measurement for ash fi lled fl ue gas, where air purging of fl ow me-

ter is required. A new innovative air purging system will be presented, which includes advanced surveillance of primary elements and build-in fl ow computer, for pressure and temperature compensation.

KL. 12.00-13.00 LUNCH KL. 11.30-13.00 LUNCH

Kl. 09.30-10.30 • Seminar ON-20

Kl. 11.00-12.00 • Seminar ON-21


On-line Measurement of TOCContinuous TOC (Total Organic Carbon) measurements in ultrapure water, to secure the quality of the water.

Short presentation of theory and measuring principle and why measuring of TOC in boiler feed water is so important?

Language: DanishPresenter: Jacob Jensen, Insatech

TOC in practiceThis seminar will cover details regarding the yearly calibration, service and maintenance.

We will go through standards in calibrations, longevity, storage before use as well as spare part replacements.

Finally we will cover handling of raw data from instrument and SL1 data as a unique aid to perfect results.

People - Ideas - Solutions

Insatech A/S • Algade 133 • DK-4760 Vordingborg • Denmark • Tel. +45 5537 2095 • www.insatech.com • [email protected]

In 2005 Insatech A/S became a part of the Addtech Group of companies – Addtech AB, Stockholm, and since the company was established in 1989, we have had a positive business development. Today we are >50 employees.

Our mission is to be a trustworthy and competent partner, who supply technical solutions and engineering within process automation.

About us

Accredited Calibration:Conductivity (Master meter)Gas Flow

Analysis of gases:Ammonia - NH3 Moisture - H2O Oxygen - O2Carbon dioxide-CO2Carbon monoxide - CO Methane - CH4Hydrochloric acid - HCl Water - HO2

Analysis of liquids:Cell density Density Color Conductivity Concentration Carbon dioxide - CO2Live Cells Sound speed NIR Dissolved Oxygen pH Plato Protein Refractive index TOCTurbidity Solids Viscosity

Analysis of solids:Moisture Fat Protein

Calibration:Flow Temperature Pressure Simulators

Control and Systems:DCS Systems Shut Down & security systems MES systems Blending Systems MID SolutionsSEEMP

Controllers:Auto-tuning Fuzzy-logic Single- and multi-loop

Flow Measurement:Bunker ControlBunker BlendingCustody transfer Coriolis mass fl owDifferential - orifi ce/pitot tube Flowswitch Magnetic inductiveMechanical Rotameters V/A Thermal mass fl ow Ultrasonic (Clamp-on and in-line)Vortex

Flow Measurement Solids:Microwaves

Level Measurement:ElectromechanicalDisplacement Hydrostatic pressure Capacitive Conductive Microwaves Radar Radiometric Ultrasonic Vibration

Pressure Measurement:Absolute Differential RelativeCalibrators Diaphragm sealLevel Pressureswitch

Registration & Data Collection:Data loggers Data Acquisition Systems GPRS - wireless transmission Recorders Paperless recorders

Single Use Technology:FlowPressureTemperatureUVConductivityLive CellsTurbidity

Services:Calibration: Flow - gases and liquids Conductivity pH Temperature PressureAccredited Calibration: Conductivity Gas Flow Temperature ElectricalService: Project Solutions Control/Periodic maintenance Services and inspections

Temperature:FlowPressureTemperatureUVConductivityLive Cell CountingTurbidity

Temperature:Calibrators Sensors Thermoelements Transmitters

Training:Customized seminars and trainingsessionwww.instrumenteringskursus.dk

Valves:Control ValvesSafety Valves

Products and Services

© Insatech A/S

Reproduction of text or excerpts of this is authorized provided the source is acknowledged.

• Process instrumentation and calibration equipment• Automation, control and data aquisition• System design, engineering and validation

(DCS and Safety Systems)• Service/maintenance and

calibration (ISO 17025 accreditation)• Site surveys and evaluation

of process optimization based on better control practices

• Marine- and ship solutions, Cargo Management Systems

• Project Management• Flow rigs/calibration rigs• Special fi ttings• Product enhancements • Wireless solutions for monitoring

and control• Complete solutions including

panels and commissioning• Seminars and training

Our main business areas:

Conductivity calibrationTemperature calibration

Electrical calibrationGas fl ow calibration

As a result of our longstanding partnership with some of the world’s leading manufacturers within instrumentation and automation, we are able to provide a global service.

We work as a professional partner for our suppliers and for our customers – we believe in long relationships.Our main markets are in the Pharmaceutical, Food, Energy, Marine/Oil & Gas Industry, which means we have a strong knowledge of the special applications, as well as the requirements for documentation in these areas.

Prod

ucts

Documentation

Com

mis

sion

ing

EngineeringDesign

Trai

nin

g

Support

Com

mis

si

ring

ort

Logi

stics

Documentatio

n

CSR & Environment

Quality Assurance

Financial

ww

w.in

satech.com

Marine SolutionsService and M

aintenance - Process Optim

ization

On-site Calibratio

n

Instrumentation

Contro

l Sys

tem

s an

d Pr

ojec

tsAc

cred

ited

Calibration

Product Engineers

Service Eng

ineers

Key Account Manager

s

Project M

anagers

Eng

inee

rs M

etro

logy La

b

program - insatech€¦ · expanded our program selection to include seminars ... fundamentals of...

Documents