programa triangle v3

RSLogix500 Project Report

PROGRAMA TRIANGLE_V3.4

Table Of Contents

Friday, February 20, 2015 - 08:10:19

Report Section Page

Processor Info 3I/O Config 4Revision History 5Function Files 6MSG Configuration 17PID Configuration 18Channel Config 19Program File List 20Data File List 21Ladder Table of Contents 22Program Files 23Data Files 29Custom Data Monitor 38Cross Reference 39Memory Usage 41Address/Symbols 50Instruction Comments 53Symbol Groups 54


Processor Information

Friday, February 20, 2015 - 08:10:19

Processor Type: Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)

Processor Name: TRIANGLE

Total Memory Used: 240 Instruction Words Used - 66 Data Table Words Used

Total Memory Left: 5456 Instruction Words Left

Program Files: 3

Data Files: 9

Program ID: b1a8


I/O Configuration

Friday, February 20, 2015 - 08:10:19

0 Bul.1762 MicroLogix 1200 Series C (1 or 2 C1 2 3 4 5 6


Revision History

Friday, February 20, 2015 - 08:10:19

Revision # Revision Note

1

0 programa automatizacion de TRIANGLE


Function Files

Friday, February 20, 2015 - 08:10:20

HSC Address (Symbol) = Value [Description]

HSC:0 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] FE - Function Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] CE - Counting Enabled = 0 [] SP - Set Parameters = 0 [] LPM - Low Preset Mask = 1 [] HPM - High Preset Mask = 1 [] UFM - Underflow Mask = 1 [] OFM - Overflow Mask = 1 [] LPI - Low Preset Interrupt = 0 [] HPI - High Preset Interrupt = 0 [] UFI - Underflow Interrupt = 0 [] OFI - Overflow Interrupt = 0 [] LPR - Low Preset Reached = 0 [] HPR - High Preset Reached = 0 [] DIR - Count Direction = 0 [] UF - Underflow = 0 [] OF - Overflow = 0 [] MD - Mode Done = 0 [] CD - Count Down = 0 [] CU - Count Up = 0 [] MOD - PLS file (bits 15-8) HSC Mode (bits 7-0) = 0 (h) [] ACC - Accumulator = 0 [] HIP - High Preset = 2147483647 [] LOP - Low Preset = -2147483648 [] OVF - Overflow = 2147483647 [] UNF - Underflow = -2147483648 [] OMB - Output Mask Bits = 0 [] HPO - High Preset Output = 0 [] LPO - Low Preset Output = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

PTO Address (Symbol) = Value [Description]

PTO:0 = {...} [] OUT - Output = -1 [] DN - Done = 0 [] DS - Decelerating Status = 0 [] RS - Run Status = 0 [] AS - Accelerating Status = 0 [] RP - Ramp Profile = 0 [] CS - Control Stop = 0 [] IS - Idle Status = 0 [] ED - Error Detected Status = 0 [] NS - Normal Operation Status = 0 [] JPS - Jog Pulse Status = 0 [] JCS - Jog Continuous Status = 0 [] ADI - Accel/Decel Pulses Independent = 0 [] JP - Jog Pulse = 0 [] JC - Jog Continuous = 0 [] EH - Enable Hard Stop = 0 [] EN - Enable Status (follows rung state) = 0 [] ER - Error Code = 0 [] OF - Output Frequency (Hz) = 0 [] OFS - Operating Frequency Status (Hz) = 0 [] JF - Jog Frequency (Hz) = 0 [] TOP - Total Output Pulses To Be Generated = 0 [] OPP - Output Pulses Produced = 0 [] ADP - Accel/Decel Pulses or File:Elem, if ADI=1 = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

PWM Address (Symbol) = Value [Description]

PWM:0 = {...} [] OUT - Output = -1 [] DS - Decelerating Status = 0 [] RS - Run Status = 0 [] AS - Accelerating Status = 0 [] PP - Profile Parameter Select = 0 [] IS - Idle Status = 0 [] ED - Error Detected Status = 0 [] NS - Normal Operation Status = 0 [] EH - Enable Hard Stop = 0 [] ES - Enable Status (follows rung state) = 0 [] ER - Error Code = 0 [] OF - Output Frequency (Hz) = 0 [] OFS - Operating Frequency Status (Hz) = 0 [] DC - Duty Cycle (e.g., 456 = 45.6%) = 0 [] DCS - Duty Cycle Status (e.g., 456 = 45.6%) = 0 [] ADD - Accel Decel Delay (10ms) = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

STI Address (Symbol) = Value [Description]

STI:0 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] TIE - Timed Interrupt Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] SPM - Set Point Msec (between interrupts) = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

EII Address (Symbol) = Value [Description]

EII:0 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] EIE - Event Interrupt Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] ES - Edge Select = 1 [] IS - Input Select = 0 [] EII:1 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] EIE - Event Interrupt Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] ES - Edge Select = 1 [] IS - Input Select = 1 [] EII:2 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] EIE - Event Interrupt Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] ES - Edge Select = 1 [] IS - Input Select = 2 [] EII:3 = {...} [] PFN - Program File Number = 0 [] ER - Error Code = 0 [] UIX - User Interrupt Executing = 0 [] UIE - User Interrupt Enable = 0 [] UIL - User Interrupt Lost = 0 [] UIP - User Interrupt Pending = 0 [] EIE - Event Interrupt Enabled = 0 [] AS - Auto Start = 0 [] ED - Error Detected = 0 [] ES - Edge Select = 1 [] IS - Input Select = 3 []


Function Files

Friday, February 20, 2015 - 08:10:20

RTC Address (Symbol) = Value [Description]

RTC:0 = {...} [] YR - Year = 0 [] MON - Month = 0 [] DAY - Day = 0 [] HR - Hour = 0 [] MIN - Minute = 0 [] SEC - Second = 0 [] DOW - Day Of The Week = 0 [] DS - Disabled = 0 [] BL - RTC Battery is Low = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

TPI Address (Symbol) = Value [Description]

TPI:0 = {...} [] POT0 - Trim Pot 0 Data (0-250) = 0 [] POT1 - Trim Pot 1 Data (0-250) = 0 [] ER - Error Code = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

MMI Address (Symbol) = Value [Description]

NOTE: MMI Data values are a reflection of what is stored in the memory module, not your program. MMI:0 = {...} [] CN - Catalog Number = {Integer} [] [0] = 0 [] [1] = 0 [] [2] = 0 [] [3] = 0 [] SRS - Series = 0 [] REV - Revision = 0 [] FT - Functionality Type = 0 [] MP - Module Present = 0 [] WP - Write Protect Indicator = 0 [] FO - Fault Override = 0 [] LPC - Load Program Compare = 0 [] LE - Load On Error = 0 [] LA - Load Always = 0 [] MB - Mode Behavior = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

BHI Address (Symbol) = Value [Description]

BHI:0 = {...} [] CN - Catalog Number = {Integer} [] [0] = 0 [] [1] = 0 [] [2] = 0 [] [3] = 0 [] SRS - Series = 0 [] REV - Revision = 0 [] FT - Functionality Type = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

CSO Address (Symbol) = Value [Description]

CS0:0 = 0 [] CS0:1 = 0 [] CS0:2 = 0 [] CS0:3 = 0 [] CS0:4 = 8 [] CS0:5 = 1025 [] CS0:6 = 0 [] CS0:7 = 0 [] CS0:8 = 0 [] CS0:9 = 0 [] CS0:10 = 0 [] CS0:11 = 0 [] CS0:12 = 0 [] CS0:13 = 0 [] CS0:14 = 0 [] CS0:15 = 0 [] CS0:16 = 0 [] CS0:17 = 0 [] CS0:18 = 0 [] CS0:19 = 0 [] CS0:20 = 0 [] CS0:21 = 0 [] CS0:22 = 0 [] CS0:23 = 0 [] CS0:24 = 0 [] CS0:25 = 0 [] CS0:26 = 0 [] CS0:27 = 0 [] CS0:28 = 0 [] CS0:29 = 0 [] CS0:30 = 0 [] CS0:31 = 0 [] CS0:32 = 0 [] CS0:33 = 0 [] CS0:34 = 0 [] CS0:35 = 0 [] CS0:36 = 0 [] CS0:37 = 0 [] CS0:38 = 0 [] CS0:39 = 0 [] CS0:40 = 0 [] CS0:41 = 0 [] CS0:42 = 0 [] CS0:43 = 0 [] CS0:44 = 0 [] CS0:45 = 0 [] CS0:46 = 0 [] CS0:47 = 0 [] CS0:48 = 0 [] CS0:49 = 0 [] CS0:50 = 0 [] CS0:51 = 0 [] CS0:52 = 0 [] CS0:53 = 0 [] CS0:54 = 0 [] CS0:55 = 0 [] CS0:56 = 0 [] CS0:57 = 0 [] CS0:58 = 0 [] CS0:59 = 0 [] CS0:60 = 0 [] CS0:61 = 0 [] CS0:62 = 0 [] CS0:63 = 0 [] CS0:64 = 0 [] CS0:65 = 0 [] CS0:66 = 0 [] CS0:67 = 0 [] CS0:68 = 0 [] CS0:69 = 0 [] CS0:70 = 0 []


Function Files

Friday, February 20, 2015 - 08:10:20

IOS Address (Symbol) = Value [Description]

IOS:0 = 0 (h) [] IOS:1 = 0 (h) [] IOS:2 = 0 (h) [] IOS:3 = 0 (h) [] IOS:4 = 0 (h) [] IOS:5 = 0 (h) [] IOS:6 = 0 (h) []


MSG Configuration

Friday, February 20, 2015 - 08:10:20


PID Configuration

Friday, February 20, 2015 - 08:10:21


Channel Configuration

Friday, February 20, 2015 - 08:10:21

CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex Edit Resource/Owner Timeout: 60 CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex Passthru Link ID: 1 CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex Write Protected: No CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex Comms Servicing Selection: Yes CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex Message Servicing Selection: Yes CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex 1st AWA Append Character: \d CHANNEL 0 (SYSTEM) - Driver: DF1 Full Duplex 2nd AWA Append Character: \a

Source ID: 1 (decimal) Baud: 19200 Parity: NONE Control Line : No Handshaking Error Detection: CRC Embedded Responses: Auto Detect Duplicate Packet Detect: Yes ACK Timeout: 50 NAK Retries: 3 ENQ Retries: 3


Program File List

Friday, February 20, 2015 - 08:10:21

Name Number Type Rungs Debug Bytes

[SYSTEM] 0 SYS 0 No 0 1 SYS 0 No 0 2 LADDER 26 No 824


Data File List

Friday, February 20, 2015 - 08:10:21

Name Number Type Scope Debug Words Elements Last

OUTPUT 0 O Global No 12 4 O:3INPUT 1 I Global No 12 4 I:3STATUS 2 S Global No 0 66 S:65BINARY 3 B Global No 3 3 B3:2TIMER 4 T Global No 30 10 T4:9COUNTER 5 C Global No 3 1 C5:0CONTROL 6 R Global No 3 1 R6:0INTEGER 7 N Global No 1 1 N7:0FLOAT 8 F Global No 2 1 F8:0


Ladder Table of Contents

Friday, February 20, 2015 - 08:10:21

File Rung Page Title Page


LAD 2 - --- Total Rungs in File = 26

Friday, February 20, 2015 - 08:10:21

0000I:0

10 Bul.1762

SENSOR DE CAMBIODE LA BOBINA

I:0

4 Bul.1762

ENTRADA 4(BOTON STOP)

I:0

5 Bul.1762

ENTRADA 5(BOTON START)

B3:0

1

ENCLAVE_CONDICIONINICAL

B3:0

1


B3:0

1


O:0

6 Bul.1762

SALIDA 6(LED INDICADOR STOP)/ (PARO DELVARIADOR)

0001I:0

4 Bul.1762

ENTRADA 4(BOTON STOP)

B3:0

1


LO:0

6 Bul.1762

SALIDA 6(LED INDICADOR STOP)/ (PARO DELVARIADOR)

UB3:0

1


0002B3:0

1


B3:0

2

ENCALVE DE ENTRADA6 (C.NA. R5)

B3:0

3

ENCALVE DE ENTRADA 7(C.NA. R6)

B3:0

4


EN

DN

TONTimer On DelayTimer T4:5Time Base 1.0Preset 1<Accum 0<

TON

TIEMPO DE PARPADEOSTART (ENCENDIDO)



Friday, February 20, 2015 - 08:10:21

0003B3:0

1


B3:0

2


B3:0

3


B3:0

4


T4:5

TT


O:0

5 Bul.1762

SALIDA 5(LED INDICADOR START/ ENCLAVE)

LB3:0

5

CONDICIÓN DE ESPERAHASTA LLEGAR A LATEMPERATURA DESEADA(L-ENCLAVEU-DESENCLAVE)

T4:5

DN


EN

DN


TON

TIEMPO DE PARPADEOSTART (APAGADO)



Friday, February 20, 2015 - 08:10:21

0004B3:0

1


B3:0

2


B3:0

3


B3:0

4


T4:6

DN

TIEMPO DE PARPADEOSTART (APAGADO)

REST4:5


0005B3:0

1


I:0

6 Bul.1762

ENTRADA 6(C.NA. R5)

B3:0

2


EN

DN


TON

RETARDO DE TIEMPOANTES DE ENERGIZARRELÉ DEL PIRÓMETRO

0006B3:0

1


T4:7

DN


B3:0

2


0007B3:0

1


I:0

7 Bul.1762

ENTRADA 7 (C.NA. R6)

B3:0

3


EN

DN


TON


0008B3:0

1


T4:8

DN


B3:0

3




Friday, February 20, 2015 - 08:10:21

0009B3:0

1


I:0

8 Bul.1762

ENTRADA 8 (C.NA. R7)

B3:0

4


EN

DN


TON


0010B3:0

1


T4:9

DN


B3:0

4


0011B3:0

1


B3:0

2


B3:0

3


B3:0

4


LO:0

5 Bul.1762

SALIDA 5(LED INDICADOR START/ ENCLAVE)

UB3:0

5


0012B3:0

1


B3:0

5


O:0

4 Bul.1762

CILINDRO CLAMP(RESTRICTOR)

O:0

0 Bul.1762

CILINDRO DE ARRASTRE



Friday, February 20, 2015 - 08:10:21

0013O:0

0 Bul.1762

CILINDRO DE ARRASTRE

EN

DN


TON

ESPERA A QUE CIERRECILINDRO DE ARRASTRE

0014T4:4

DN


EN

DN


TON

TIEMPO ACTIVO DEMOTORES PASO

0015T4:0

TT


O:0

1 Bul.1762

GENERADOR DE PULSO

0016T4:0

DN

TIEMPO FIN DEL PULSO

UO:0

1 Bul.1762

GENERADOR DE PULSO

0017B3:0

1


I:0

9 Bul.1762

SENSOR DE PARO DEBOBINA

EN

DN


TON

TIEMPO DE ESPERAPARA ARRANQUEDEL MOTOR DE LABOBINA

0018T4:3

DN

TIEMPO DE ESPERAPARA ARRANQUEDEL MOTOR DE LABOBINA

O:0

8 Bul.1762

MOTOR DE LA BOBINA

0019B3:0

1


T4:0

DN

TIEMPO FIN DEL PULSO

LO:0

9 Bul.1762

CIERRA BOBINACONTACTOR DE LATOLVA /PULSO ARRANQUEDEL VARIADOR



Friday, February 20, 2015 - 08:10:22

0020B3:0

1


UO:0

9 Bul.1762

CIERRA BOBINACONTACTOR DE LATOLVA /PULSO ARRANQUEDEL VARIADOR

0021T4:0

DN

TIEMPO FIN DEL PULSOI:0

0 Bul.1762

SENSOR DEL PRODUCTO

T4:1

EN

TIEMPO MANTENIENDOJAW CERRADO

EN

DN


TON


0022T4:1

EN


O:0

2 Bul.1762

CILINDRO JAW

O:0

7 Bul.1762

CILINDRO BACK SEAL(SELLO POSTERIOR)

EN

DN


TON

TIEMPO MANTENIENDOCORTE

0023T4:2

DN

TIEMPO MANTENIENDOCORTE

O:0

3 Bul.1762

CILINDRO DE CORTE

0024T4:1

DN


REST4:0


REST4:4


0025 END


Data File O0 (bin) -- OUTPUT

(Radix Binary) Friday, February 20, 2015 - 08:10:22

Offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

O:0.0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)


Data File I1 (bin) -- INPUT


Offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

I:0.0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)


Data File S2 (hex) -- STATUS

Friday, February 20, 2015 - 08:10:22

Main

Processor Mode S:1/0 - S:1/4 = Remote RunOn Power up Go To Run (Mode Behavior) S:1/12 = 0First Pass S:1/15 = NoFree Running Clock S:4 = 1010-0001-0100-1110

Proc

OS Catalog Number S:57 = 1200OS Series S:58 = COS FRS S:59 = Processor Catalog Number S:60 = Processor Series S:61 = AProcessor FRN S:62 =

User Program Type S:63 = 4110hCompiler Revision Number S:64 =

Scan Times

Maximum (x10 ms) S:22 = 16Watchdog (x10 ms) S:3 (high byte) = 10Last 100 uSec Scan Time S:35 = 7Scan Toggle Bit S:33/9 = 1

Math

Math Overflow Selected S:2/14 = 0Overflow Trap S:5/0 = 0Carry S:0/0 = 0Overflow S:0/1 = 0Zero Bit S:0/2 = 0Sign Bit S:0/3 = 0

Math Register (lo word) S:13 = 0Math Register (high word) S:14-S:13 = 0Math Register (32 Bit) S:14-S:13 = 0

Chan 0

Processor Mode S:1/0- S:1/4 = Remote RunNode Address S:15 (low byte) = 0Baud Rate S:15 (high byte) = ?Channel Mode S:33/3 = 0Comms Active S:33/4 = 0Incoming Cmd Pending S:33/0 = 0Msg Reply Pending S:33/1 = 0

Outgoing Msg Cmd Pending S:33/2 = 0

Debug

Suspend Code S:7 = 0Suspend File S:8 = 0

Errors

Fault Override At Power Up S:1/8 = 0Startup Protection Fault S:1/9 = 0Major Error Halt S:1/13 = 0Overflow Trap S:5/0 = 0Control Register Error S:5/2 = 0Major Error Executing User Fault Rtn. S:5/3 = 0Retentive Data Lost S:5/11 = 0Input Filter Selection Modified S:5/13 = 0

Fault Routine S:29 = 0Major Error S:6 = 0h

Error Description:

Protection

Deny Future Access S:1/14 = NoData File Overwrite Protection Lost S:36/10 = False


Data File B3 (bin) -- BINARY


Offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 (Symbol) Description

B3:0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 B3:1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B3:2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0


Data File T4 -- TIMER

Friday, February 20, 2015 - 08:10:22

Offset EN TT DN BASE PRE ACC (Symbol) Description

T4:0 0 0 0 1.0 sec 2 0 TIEMPO ACTIVO DE MOTORES PASO T4:1 0 0 0 1.0 sec 1 0 TIEMPO MANTENIENDO JAW CERRADO T4:2 0 0 0 .01 sec 50 0 TIEMPO MANTENIENDO CORTE T4:3 0 0 0 1.0 sec 1 0 TIEMPO DE ESPERA PARA ARRANQUE DEL MOTOR DE LA BOBINA T4:4 0 0 0 1.0 sec 1 0 ESPERA A QUE CIERRE CILINDRO DE ARRASTRE T4:5 0 0 0 1.0 sec 1 0 TIEMPO DE PARPADEO START (ENCENDIDO) T4:6 0 0 0 1.0 sec 1 0 TIEMPO DE PARPADEO START (APAGADO) T4:7 0 0 0 1.0 sec 2 0 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:8 0 0 0 1.0 sec 2 0 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:9 0 0 0 1.0 sec 2 0 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO


Data File C5 -- COUNTER

Friday, February 20, 2015 - 08:10:22

Offset CU CD DN OV UN UA PRE ACC (Symbol) Description

C5:0 0 0 0 0 0 0 0 0


Data File R6 -- CONTROL

Friday, February 20, 2015 - 08:10:22

Offset EN EU DN EM ER UL IN FD LEN POS (Symbol) Description

R6:0 0 0 0 0 0 0 0 0 0 0


Data File N7 (dec) -- INTEGER

(Radix Decimal) Friday, February 20, 2015 - 08:10:23

Offset 0 1 2 3 4 5 6 7 8 9

N7:0 0


Data File F8 -- FLOAT

Friday, February 20, 2015 - 08:10:23

Offset 0 1 2 3 4

F8:0 0


CDM 0 - Untitled

Friday, February 20, 2015 - 08:10:23

Address (Symbol) = Value [Description]


RSLogix 500 Cross Reference Report - Sorted by Address

Friday, February 20, 2015 - 08:10:23

O:0/0 - CILINDRO DE ARRASTRE OTE - File #2 - 12 XIC - File #2 - 13O:0/1 - GENERADOR DE PULSO OTE - File #2 - 15 OTU - File #2 - 16O:0/2 - CILINDRO JAW OTE - File #2 - 22O:0/3 - CILINDRO DE CORTE OTE - File #2 - 23O:0/4 - CILINDRO CLAMP (RESTRICTOR) OTE - File #2 - 12O:0/5 - SALIDA 5 (LED INDICADOR START / ENCLAVE) OTE - File #2 - 3 OTL - File #2 - 11O:0/6 - SALIDA 6 (LED INDICADOR STOP) / (PARO DEL VARIADOR) OTE - File #2 - 0 OTL - File #2 - 1O:0/7 - CILINDRO BACK SEAL (SELLO POSTERIOR) OTE - File #2 - 22O:0/8 - MOTOR DE LA BOBINA OTE - File #2 - 18O:0/9 - CIERRA BOBINA CONTACTOR DE LA TOLVA / PULSO ARRANQUE DEL VARIADOR OTL - File #2 - 19 OTU - File #2 - 20I:0/0 - SENSOR DEL PRODUCTO XIC - File #2 - 21I:0/4 - ENTRADA 4 (BOTON STOP) XIC - File #2 - 0 XIO - File #2 - 1I:0/5 - ENTRADA 5 (BOTON START) XIC - File #2 - 0I:0/6 - ENTRADA 6(C.NA. R5) XIC - File #2 - 5I:0/7 - ENTRADA 7 (C.NA. R6) XIC - File #2 - 7I:0/8 - ENTRADA 8 (C.NA. R7) XIC - File #2 - 9I:0/9 - SENSOR DE PARO DE BOBINA XIO - File #2 - 17I:0/10 - SENSOR DE CAMBIO DE LA BOBINA XIO - File #2 - 0B3:0/1 - ENCLAVE_CONDICION INICAL OTE - File #2 - 0 OTU - File #2 - 1 XIC - File #2 - 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 17, 19 XIO - File #2 - 0, 1, 20B3:0/2 - ENCALVE DE ENTRADA 6 (C.NA. R5) OTE - File #2 - 6 XIC - File #2 - 5, 11 XIO - File #2 - 2, 3, 4B3:0/3 - ENCALVE DE ENTRADA 7 (C.NA. R6) OTE - File #2 - 8 XIC - File #2 - 7, 11 XIO - File #2 - 2, 3, 4B3:0/4 - ENCALVE DE ENTRADA 8 (C.NA. R7) OTE - File #2 - 10 XIC - File #2 - 9, 11 XIO - File #2 - 2, 3, 4B3:0/5 - CONDICIÓN DE ESPERA HASTA LLEGAR A LA TEMPERATURA DESEADA (L-ENCLAVE U-DESENCLAVE) OTL - File #2 - 3 OTU - File #2 - 11 XIO - File #2 - 12T4:0 - TIEMPO ACTIVO DE MOTORES PASO TON - File #2 - 14 RES - File #2 - 24T4:0/DN - TIEMPO FIN DEL PULSO XIC - File #2 - 16, 19, 21T4:0/TT - XIC - File #2 - 15


RSLogix 500 Cross Reference Report - Sorted by Address

Friday, February 20, 2015 - 08:10:23

T4:1 - TIEMPO MANTENIENDO JAW CERRADO TON - File #2 - 21T4:1/DN - XIC - File #2 - 24T4:1/EN - XIC - File #2 - 21, 22T4:2 - TIEMPO MANTENIENDO CORTE TON - File #2 - 22T4:2/DN - XIC - File #2 - 23T4:3 - TIEMPO DE ESPERA PARA ARRANQUE DEL MOTOR DE LA BOBINA TON - File #2 - 17T4:3/DN - XIC - File #2 - 18T4:4 - ESPERA A QUE CIERRE CILINDRO DE ARRASTRE TON - File #2 - 13 RES - File #2 - 24T4:4/DN - XIC - File #2 - 14T4:5 - TIEMPO DE PARPADEO START (ENCENDIDO) TON - File #2 - 2 RES - File #2 - 4T4:5/DN - XIC - File #2 - 3T4:5/TT - XIC - File #2 - 3T4:6 - TIEMPO DE PARPADEO START (APAGADO) TON - File #2 - 3T4:6/DN - XIC - File #2 - 4T4:7 - RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO TON - File #2 - 5T4:7/DN - XIC - File #2 - 6T4:8 - RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO TON - File #2 - 7T4:8/DN - XIC - File #2 - 8T4:9 - RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO TON - File #2 - 9T4:9/DN - XIC - File #2 - 10


Data File O0 -- OUTPUT Usage

(Radix Binary/Subelement) Friday, February 20, 2015 - 08:10:23

Offset FW 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

O:0.0 . . . . . . X X X X X X X X X X Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.1 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.2 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)O:0.3 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)


Data File I1 -- INPUT Usage


Offset FW 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

I:0.0 . . . . . X X X X X X X . . . X Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.1 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.2 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)I:0.3 . . . . . . . . . . . . . . . . Bul.1762 MicroLogix 1200 Series C (1 or 2 Comm Ports)


Data File S2 -- STATUS Usage

(Radix Element Only) Friday, February 20, 2015 - 08:10:23

Offset 0 1 2 3 4 5 6 7 8 9

S:0 . . . . . . . . . . S:10 . . . . . . . . . . S:20 . . . . . . . . . . S:30 . . . . . . . . . . S:40 . . . . . . . . . . S:50 . . . . . . . . . . S:60 . . . . . .


Data File B3 -- BINARY Usage


Offset FW 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 (Symbol) Description

B3:0 . . . . . . . . . . X X X X X . B3:1 . . . . . . . . . . . . . . . . B3:2 . . . . . . . . . . . . . . . .


Data File T4 -- TIMER Usage


Offset FW EN TT DN BASE PRE ACC (Symbol) Description

T4:0 W . X X . . . TIEMPO ACTIVO DE MOTORES PASO T4:1 W X . X . . . TIEMPO MANTENIENDO JAW CERRADO T4:2 W . . X . . . TIEMPO MANTENIENDO CORTE T4:3 W . . X . . . TIEMPO DE ESPERA PARA ARRANQUE DEL MOTOR DE LA BOBINA T4:4 W . . X . . . ESPERA A QUE CIERRE CILINDRO DE ARRASTRE T4:5 W . X X . . . TIEMPO DE PARPADEO START (ENCENDIDO) T4:6 W . . X . . . TIEMPO DE PARPADEO START (APAGADO) T4:7 W . . X . . . RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:8 W . . X . . . RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:9 W . . X . . . RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO


Data File C5 -- COUNTER Usage


Offset FW CU CD DN OV UN UA PRE ACC (Symbol) Description

C5:0 . . . . . . . .


Data File R6 -- CONTROL Usage


Offset FW EN EU DN EM ER UL IN FD LEN POS (Symbol) Description

R6:0 . . . . . . . . . .


Data File N7 -- INTEGER Usage


Offset 0 1 2 3 4 5 6 7 8 9

N7:0 .


Data File F8 -- FLOAT Usage


Offset 0 1 2 3 4

F8:0 .


Address/Symbol Database

Friday, February 20, 2015 - 08:10:24

Address Symbol Scope Description Sym Group

B3:0/1 ENCLAVE_CONDICION INICAL B3:0/2 ENCALVE DE ENTRADA 6 (C.NA. R5) B3:0/3 ENCALVE DE ENTRADA 7 (C.NA. R6) B3:0/4 ENCALVE DE ENTRADA 8 (C.NA. R7) B3:0/5 CONDICIÓN DE ESPERA HASTA LLEGAR A LA TEMPERATURA DESEADA (L-ENCLAVE U-DESENCLAVE) I:0/0 SENSOR DEL PRODUCTO I:0/1 STOP I:0/2 SENSOR DEL PRODUCTO I:0/4 ENTRADA 4 (BOTON STOP) I:0/5 ENTRADA 5 (BOTON START) I:0/6 ENTRADA 6(C.NA. R5) I:0/7 ENTRADA 7 (C.NA. R6) I:0/8 ENTRADA 8 (C.NA. R7) I:0/9 SENSOR DE PARO DE BOBINA I:0/10 SENSOR DE CAMBIO DE LA BOBINA O:0/0 CILINDRO DE ARRASTRE O:0/1 GENERADOR DE PULSO O:0/2 CILINDRO JAW O:0/3 CILINDRO DE CORTE O:0/4 CILINDRO CLAMP (RESTRICTOR) O:0/5 SALIDA 5 (LED INDICADOR START / ENCLAVE) O:0/6 SALIDA 6 (LED INDICADOR STOP) / (PARO DEL VARIADOR) O:0/7 CILINDRO BACK SEAL (SELLO POSTERIOR) O:0/8 MOTOR DE LA BOBINA O:0/9 CIERRA BOBINA CONTACTOR DE LA TOLVA / PULSO ARRANQUE DEL VARIADOR R6:0R6:0/1 BANDERA ENCLAVE PARA MOTOR DE TOLVA S:0 Arithmetic Flags S:0/0 Processor Arithmetic Carry Flag S:0/1 Processor Arithmetic Underflow/ Overflow Flag S:0/2 Processor Arithmetic Zero Flag S:0/3 Processor Arithmetic Sign Flag S:0/4S:1 Processor Mode Status/ Control S:1/0 Processor Mode Bit 0 S:1/1 Processor Mode Bit 1 S:1/2 Processor Mode Bit 2 S:1/3 Processor Mode Bit 3 S:1/4 Processor Mode Bit 4 S:1/5 Forces Enabled S:1/6 Forces Present S:1/7 Comms Active S:1/8 Fault Override at Powerup S:1/9 Startup Protection Fault S:1/10 Load Memory Module on Memory Error S:1/11 Load Memory Module Always S:1/12 Load Memory Module and RUN S:1/13 Major Error Halted S:1/14 Access Denied S:1/15 First Pass S:2/0 STI Pending S:2/1 STI Enabled S:2/2 BANDERA INTERMITENTE START S:2/3S:2/4S:2/5S:2/6 DH-485 Message Reply Pending S:2/7 DH-485 Outgoing Message Command Pending S:2/15 Comms Servicing Selection S:3 Current Scan Time/ Watchdog Scan Time S:4 Time Base S:5/0 Overflow Trap S:5/2 Control Register Error S:5/3 Major Err Detected Executing UserFault Routine S:5/4 M0-M1 Referenced on Disabled Slot S:5/8 Memory Module Boot S:5/9 Memory Module Password Mismatch S:5/10 STI Overflow S:5/11 Battery Low S:6 Major Error Fault Code S:7 Suspend Code S:8 Suspend File S:9 Active Nodes S:10 Active Nodes S:11 I/O Slot Enables S:12 I/O Slot Enables S:13 Math Register S:14 Math Register S:15 Node Address/ Baud Rate



Friday, February 20, 2015 - 08:10:24


S:16 Debug Single Step Rung S:17 Debug Single Step File S:18 Debug Single Step Breakpoint Rung S:19 Debug Single Step Breakpoint File S:20 Debug Fault/ Powerdown Rung S:21 Debug Fault/ Powerdown File S:22 Maximum Observed Scan Time S:23 Average Scan Time S:24 Index Register S:25 I/O Interrupt Pending S:26 I/O Interrupt Pending S:27 I/O Interrupt Enabled S:28 I/O Interrupt Enabled S:29 User Fault Routine File Number S:30 STI Setpoint S:31 STI File Number S:32 I/O Interrupt Executing S:33 Extended Proc Status Control Word S:33/0 Incoming Command Pending S:33/1 Message Reply Pending S:33/2 Outgoing Message Command Pending S:33/3 Selection Status User/DF1 S:33/4 Communicat Active S:33/5 Communicat Servicing Selection S:33/6 Message Servicing Selection Channel 0 S:33/7 Message Servicing Selection Channel 1 S:33/8 Interrupt Latency Control Flag S:33/9 Scan Toggle Flag S:33/10 Discrete Input Interrupt Reconfigur Flag S:33/11 Online Edit Status S:33/12 Online Edit Status S:33/13 Scan Time Timebase Selection S:33/14 DTR Control Bit S:33/15 DTR Force Bit S:34 Pass-thru Disabled S:34/0 Pass-Thru Disabled Flag S:34/1 DH+ Active Node Table Enable Flag S:34/2 Floating Point Math Flag Disable,Fl S:35 Last 1 ms Scan Time S:36 Extended Minor Error Bits S:36/8 DII Lost S:36/9 STI Lost S:36/10 Memory Module Data File Overwrite Protection S:37 Clock Calendar Year S:38 Clock Calendar Month S:39 Clock Calendar Day S:40 Clock Calendar Hours S:41 Clock Calendar Minutes S:42 Clock Calendar Seconds S:43 STI Interrupt Time S:44 I/O Event Interrupt Time S:45 DII Interrupt Time S:46 Discrete Input Interrupt- File Number S:47 Discrete Input Interrupt- Slot Number S:48 Discrete Input Interrupt- Bit Mask S:49 Discrete Input Interrupt- Compare Value S:50 Processor Catalog Number S:51 Discrete Input Interrupt- Return Number S:52 Discrete Input Interrupt- Accumulat S:53 Reserved/ Clock Calendar Day of the Week S:55 Last DII Scan Time S:56 Maximum Observed DII Scan Time S:57 Operating System Catalog Number S:58 Operating System Series S:59 Operating System FRN S:61 Processor Series S:62 Processor Revision S:63 User Program Type S:64 User Program Functional Index S:65 User RAM Size S:66 Flash EEPROM Size S:67 Channel 0 Active Nodes S:68 Channel 0 Active Nodes S:69 Channel 0 Active Nodes S:70 Channel 0 Active Nodes S:71 Channel 0 Active Nodes S:72 Channel 0 Active Nodes S:73 Channel 0 Active Nodes S:74 Channel 0 Active Nodes



Friday, February 20, 2015 - 08:10:24


S:75 Channel 0 Active Nodes S:76 Channel 0 Active Nodes S:77 Channel 0 Active Nodes S:78 Channel 0 Active Nodes S:79 Channel 0 Active Nodes S:80 Channel 0 Active Nodes S:81 Channel 0 Active Nodes S:82 Channel 0 Active Nodes S:83 DH+ Active Nodes S:84 DH+ Active Nodes S:85 DH+ Active Nodes S:86 DH+ Active Nodes T4:0 TIEMPO ACTIVO DE MOTORES PASO T4:0/DN TIEMPO FIN DEL PULSO T4:0/EN TIEMPO INICIO DE PULSO T4:1 TIEMPO MANTENIENDO JAW CERRADO T4:1/DNT4:2 TIEMPO MANTENIENDO CORTE T4:3 TIEMPO DE ESPERA PARA ARRANQUE DEL MOTOR DE LA BOBINA T4:4 ESPERA A QUE CIERRE CILINDRO DE ARRASTRE T4:5 TIEMPO DE PARPADEO START (ENCENDIDO) T4:6 TIEMPO DE PARPADEO START (APAGADO) T4:7 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:8 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO T4:9 RETARDO DE TIEMPO ANTES DE ENERGIZAR RELÉ DEL PIRÓMETRO


Instruction Comment Database

Friday, February 20, 2015 - 08:10:24

Address Instruction Description


Symbol Group Database

Friday, February 20, 2015 - 08:10:24

Group_Name Description

programa triangle v3

Documents