programing instruction wind, sun, & rain sensor rain sun sensor instruction... · 4/25/2013...
TRANSCRIPT
4/25/2013
Win
d,
Su
n a
nd
Rain
Sen
so
r
WIND, SUN, & RAIN SENSOR
PROGRAMING INSTRUCTION
4/25/2013
Rain Sensor
Light Sensor
Wind Sensor
Specifications
Unique shape with patent;
UV material plastic cover, suitable for out door installations;
Wind sensor parts utilized double stainless bearing to ensure high sensitive;
Laser printing on adjustment knob, clearly look and lasting adhesion;
3 Installation options
Precise strength adjustment Parameters
Receiver working voltage: AC230v/50Hz (optional 120V/60Hz)
Sensor frequency: 433.92MHz (optional 315MHz)
Receiver load power: <800W
Sensor working voltage: DC12V
Sensor working temperature: -20C~+80C
Installation Notice
1. Insure the
power is being
supplied to the
motorized unit.
2. Press the “stop”
button and hold
for approximately
5 seconds
3. The mini receiver
will beep after
approx. 5 sec.
Release the stop
button once the beep
has sounded.
4. Press
program
button on
sensor.
(Small hole above 3
adjustments)
5. Once the sensor
program button has
been pressed the mini
receiver will beep
1. Insure the
power is being
supplied to the
motorized unit.
2. Press the “stop”
button and hold
for approximately
5 seconds
3. The motor will jog
(move up & down)
after approx. 5 sec.
Release the stop
button and operate
within 3 sec.
4. Press
program
button on
sensor.
5. Once the sensor
program button has
been pressed the
motor will jog again
to confirm program
completion.
External Mini-Receiver
Built In Mini-Receiver
(Small hole above 3
adjustments)
Wind, Sun and Rain Sensor
4/25/2013
1. Press UP or DOWN
HOOD
DOWN LIMIT
2. Close Curtin
3.Counterclockwise
direction increase
desired speed value.
Clockwise reduces
speed value
Wind (Km/H)
5. Curtin opened
automatically
Not action
Not action
Action &
open
After 15 Min
15 min
time
delay,, no
any action
6.
3. LED on
sensor start
flash & sends
out radio
message
Wind speed > desired speed
& last for 3’s
1. Press UP or DOWN
HOOD
DOWN LIMIT
2. Close Curtin Light (Klux)
5. Curtin opened
automatically
6. Awning open automatic
Light value < desired value,
after 18’s action
When desired value is the
MIN value (Clockwise
direction is the end)
Light Value < desired
value, after 15 min
3. Counterclockwise direction increase value
clockwise reduces value
4. LED on sensor starts flashing & sends
our message
1. Press UP or DOWN
HOOD
DOWN LIMIT
2. Close Curtin Rain (mm/H) 5. Curtin opened
automatically
Not action
Not action
Action &
open
After 15 Min
15 min
time
delay,, no
any action
6.
Rain value > the MIN
value after 1’s rain
sensor action
When desired value is the
MIN value (Clockwise
direction is the end)
Light Value < desired
value, after 15 min
3. Anticlockwise to increase and clockwise to
reduce value
4. LED on sensor starts flashing & sends
our message
HOOD
DOWN LIMIT
Light > Desired MIN
Value after 3’s light
action
Light value > desired
value after 2 min light
action
Wind Speed 10Km/H 20km/H 30Km/H 40Km/H 50Km/H
Wind Ford 2 class 4 class 5 class 6 class 7 class
Wind, Sun and Rain Sensor
4/25/2013
Wind, Sun and Rain Sensor
MaestroShield Wind, Sun and Rain Sensor system includes the sensor, acting as a transmitter, and operate with all MaestroShield’s mini-receiver and matched transmitter. When fitted to motors and control units designed for this purpose, users are able to open and close screens automatically based on the related atmospheric conditions. The sensors measure the wind speed, luminous intensity, and the rain fall. When the measured wind value exceeds the level set by the trimmer, or the measured light intensity of the sun set by the trimmer is exceeded, or the measured rain scale is exceeded the level set by the trimmer, the sensor sends this information to the motors and related control units.
Works with tubular motors and radio control systems to make screens roll up depending on the weather
ABS Plastic materials that resist ultraviolet rays
Waterproof
Different sensitivity settings
2 year 100% replacement Warranty coverage
FEATURES
MaestroShield® motors and electronics are innovation at its best. Designed in-house by Swedish and American engineers, these industry leading components are the perfect marriage of power, precision and integration. With multiple configurations available, the agility of our motors and electronics puts them in a class of their own. Designed and tested with quality in mind MaestroShield® motors and electronics will greatly enhance your shutter, door, screen and shading applications. These are only some of the reasons why MaestroShield® is superior to the competition in tubular motors and electronics.
www.maestroshield.com Phone: 239.596.8883 | Fax: 239.596.8823 | Toll Free: 866.549.0269 Technical Support/Customer Service 239.206.9115
Sun Adjustment
Rain Adjustment
Wind Adjustment
Program Button