project acronym: engiwpc objective: development of high performance polymer composites with wood...
TRANSCRIPT
Project Acronym:Project Acronym: EngiWPC EngiWPC
Objective:Objective: Development of high performance Development of high performance
polymer composites with wood fibers and polymer composites with wood fibers and
reactive thermoplasticsreactive thermoplastics
Programme Type: Programme Type: Seventh Framework ProgramSeventh Framework Program
Specific Programme:Specific Programme: Cooperation Cooperation
Thematic Priority: Thematic Priority: Nanosciences, Nanotechnologies, Materials and Nanosciences, Nanotechnologies, Materials and
new Production Technologies- NMPnew Production Technologies- NMP
Sub-Thematic Priority:Sub-Thematic Priority: Advanced wood-based composites and their Advanced wood-based composites and their
productionproduction
List of organizations1. Instituto de Engenharia Mecânica e Gestão Industrial (INEGI/UP)
www.inegi.up.ptContact person: Dr. Celeste Pereira ([email protected])
Tel. +351 22 957 87 13Address: Rua do Barroco Nº 174
4465-591Leça do BalioCountry: Portugal
2- LEPAE – Laboratory of Process, Environment and Energy EngineeringFaculdade de Engenharia da Universidade do Porto (FE/UP)http://paginas.fe.up.pt/lepae/Contact person: Dr. Luísa Carvalho ([email protected])
Tel. +351 22 508 1687 Address: Rua Dr. Roberto Frias s/n
4200-465PortoCountry: Portugal
Composite Materials ProductionComposite Materials ProductionFilament winding, Pultrusion, Autoclave, Hot Press Plates,RTM (Resin Transfer Moulding) and Vacuum Assisted Resin Infusion
Product Development and Technology TransferProduct Development and Technology Transfer
New Materials Research and DevelopmentNew Materials Research and DevelopmentPolymer Composites, Natural fibres composites, Low/High structural adhesives, Nanocomposites, Smart materials and health monitoring, Materials more resistant to fire
Materials characterizationMaterials characterization Gel Timer, Dynamic Mechanical Thermo Analysis (DMTA), Mechanical Characterization, Fatigue, Creep and Relaxation Tests, Impact Tests, Internal Pressure Tests, NDT tests, Health monitoring of composite structures, Fire Reaction Tests
Structural and Processes SimulationStructural and Processes Simulation
Scientific and Technologic Expertise
Department of Wood EngineeringDepartment of Wood EngineeringPolytechnic Institute of ViseuPolytechnic Institute of Viseu
Process Systems EngineeringModeling and simulation of wood-based and paper
industrial processes
Forest Products TransformationMonitoring and control of wood machining
processesObjective and subjective evaluation of finished
surfaces Vision system, surface profilometerNew and better analysis methods for adhesives
HPLC, GPC-viscotek, FTIR-NIR, DSC, TGAImprovement of adhesion process
Hot-press, goniometer
Laboratory of Process, Environment and Energy EngineeringLaboratory of Process, Environment and Energy EngineeringFaculty of Engineering, University of PortoFaculty of Engineering, University of Porto
Health and Environment
Systems based on membrane/ adsorption processes
Chemistry of Natural Resources
Biotechnology and Interfacial Phenomena
Wood Engineering / Furniture Design
Industrial Machines and testing devices
- Raw Materials Producers (natural and wood fibres and reactive thermoplastics)
- Technologic Experts in Equipment Design and Manufacturing
- Scientific and Technologic Experts in Natural and wood fibres functionalization
- Scientific and Technologic Experts in Reactive thermoplastics processing
- …
Search for Partners