project: lineardocs.ledalite.com/download/pdf/boldplsusp_65lm_qn.pdfphilips advance xitanium 0-10v,...
TRANSCRIPT
-
Linear
BoldPlay suspended
66500 lm/4ft 75% U500 lm/4ft 75% Upp30003000/3500/3500/4000K/4000K
Project:
Spec Type:
Catalog No: 7806LxAQN
Qty
Line Notes:
Brilliant design and intuitive engineering fearlessly combine to deliverunprecedented performance. BoldPlay's striking contrast of effortless styleand urban edginess makes a distinctive statement in any space. Availabletunable white technology gives you the ability to vary color temperature andintensity, harmonizing lighting with your daily life.
Ordering guide
Product Type
7806
BoldPlay Direct/Indirect
Source
L
LL LED
Color Temp *
AA 4000KBB 3500KCC 3000K
Lumens *
A
AA 6500 lm/4ftCC 4600 lm/4ftEE 3400 lm/4ft
Lower Optics
Q
QQ MesoOptics Lens
Upper Optics
N
NN LightguideDD 55% Down KitGG 80% Down KitJJ 100% Down Kit
Run Length
0404 4'0808 8'XXXX Total run length
(4' increments)
Wiring †
77 1 cct DimmingEE 2 cct A/B Dimming (Alt.
4ft.)MM 1 cct Dimming + EM WiringNN 1 cct Dimming + EM Batt.
Pack
Voltage
11 120V22 277V33 347V
Driver
EE Philips Advance0-10V(1% dim)
SS Philips AdvanceSensor Ready (5%
dim)
Finish
WW StandardWhite
TT TitaniumSilver
BB BlackCC Custom
* Nominal values within a range. Down kits reduce output & efficacy. Consult photometry data for CRI, color temp, lumens & distribution of chosen configuration.† Not all wiring types are available with all configurations. Consult Philips Ledalite for a complete list of available options.
Mounting Hardware
Mount TypeConsult separate mounting spec sheet for mount type options:LLedalitedalite Se Suspended Muspended Mounounting Oting Opptionstions
Suspension LengthDistance from ceiling to top of luminaire in inches
Endcaps - Integrated Controls Please indicate with check mark.
Response Daylight Single Zone (DS)
SpaceWise DT Occupancy & Daylight Sensor (SZ)
BoldPlSusp_65lm_QN 06.18 page 1 of 5
http://docs.ledalite.com/download/pdf/mounting_suspended.pdf
-
BoldPlay suspended6500 lm/4ft 75% Up3000/3500/4000K
Optical SystemThe optical system contains arrays of LEDs edge-lightinga low profile light-guide panel, using total internalreflection to homogenize the sources. Themicrostructured surface of the panel optimizes lightextraction to create an efficacious direct/indirectdistribution. Light is purified and controlled byMesoOptics film as it passes through a non-glare acryliclens. Standard distribution is 75% up / 25% down forsuspended and 65% up / 35% down for wall mountversion.
EndcapsDiecast aluminum endcaps finished with a texturedmatte powder coat to match the luminaire.SSuspended:uspended: Available in sculpted (standard) & solid flat.WWaalll:l: Available with solid flat only.
FinishStandard finish is a textured matte powder coat in white,black or titanium silver. Custom colors available uponrequest. White sensors only.
HousingPrecision formed 18 gauge cold-rolled steel.
WeightMaximum: Suspended 3.75lb/ft & Wall 3.0lb/ft. Certain configurations available with:
Response Daylight SensorsSpaceWise DT Occupancy & Daylight Sensors w/advanced grouping & Dwell Time.
*SpaceWise DT commissioning is via a compatibleAndroid phone and Philips Field App. Compatiblewireless dimming wall switches are available for dimming.347V is not available as a standard option. For moreinformation, please refer to
ElectricalFactory pre-wired to section ends with quick-wireconnectors.
Standard DriversPhilips Advance Xitanium 0-10V, 1-100%.Philips Advance Xitanium Sensor Ready, 5-100%.Class 2 rated output. Consult Philips Ledalite for otheravailable drivers.
Standard Battery PackPhilips Bodine, 90 min, 10W, Class 2 rated output,Emergency lumen output = 10W x luminaire efficacy x 1.1.Typical output: 1100lm.
Lumen MaintenanceLEDs have been tested by the manufacturer inaccordance with IESNA LM-80-08. At an ambienttemperature of 25°C, the LED lumen maintenanceexpectation according to IES TM-21-11 is:L80 (12k) >72,000 hrs (RReporeportteded methodology).
Source ColorLEDs rated for color rendering CRI >80 and fixture tofixture color accuracy within 2 SDCM.
Controls
wwwwww.phil.philips.ips.ccom/spaom/spacceewisewise
MountingSSuspended:uspended: Tamper-resistant aircraft cable gripperprovides unlimited vertical adjustment. Aircraft cable,crimp and cable gripper are independently tested tomeet stringent safety requirements.WWaalll:l: Fixture is mounted flush to wall using hidden wallbrackets which attach to existing structure, variable within2”-5” of end or joint.
JointsSelf-aligning joining system with hands-free pre-joiningwire access.
ApprovalsCertified to UL, CSA and IES standards.Certain suspended versions without down kits areDesignLights Consortium® qualified. Please see the DLCQPL list for exact catalog numbers(wwwwww.designl.designlighights.ts.ororg/QPLg/QPL).
WarrantyPhilips indoor professional luminaires 5 year LEDwarranty: wwwwww.phil.philips.ips.ccom/wom/warrarranantiesties.
EnvironmentRated for dry or damp locations in operating ambienttemperatures 0-40°C (32-104°F). Certain luminairecomponents may be adversely affected bycontaminants. Damage caused by sulfur, chlorine,petroleum based solutions or other contaminants are notcovered under warranty. Not suitable for natatoriumenvironments.
Due to continuing product improvements, Philips Ledalite reserves the right to change the specifications without notice.
Dimensions - Cross Section
BoldPlSusp_65lm_QN 06.18 page 2 of 5
http:/www.philips.com/spacewisehttp://www.designlights.org/QPLhttp://www.philips.com/warranties
-
BoldPlay suspended6500 lm/4ft 75% Up3000/3500/4000K
Dimensions - Modules
Optics and Styles
BoldPlSusp_65lm_QN 06.18 page 3 of 5
-
BoldPlay suspended6500 lm/4ft 75% Up3000/3500/4000K
Photometry @ CRI>80, 3500K
180
135
90
45
0
45
90
135
75% Up / 25% Down
04590
1700 cd
Horizontal AngleVerticalAngle 0 22.5 45 67.5 90
ZonalLumens
0 433 433 433 433 433 05 434 436 440 446 446 4315 461 472 508 544 557 14625 493 521 604 682 714 27735 489 518 595 661 686 36445 389 397 417 433 438 32155 259 255 257 264 268 23565 153 151 155 161 166 15575 62 64 66 68 68 7285 11 13 13 13 15 1690 0 0 0 0 0 095 187 217 306 427 476 341105 489 582 865 1256 1449 949115 644 750 1050 1438 1628 1071125 661 744 963 1218 1337 879135 623 686 797 926 980 626145 597 638 689 744 767 435155 584 612 648 665 667 296165 574 591 610 621 623 172175 567 572 576 580 582 55180 565 565 565 565 565 0
Candela Distribution
Values per 4ft unit
Fixture photometry has beenconducted in accordance withIESNA LM-79-08
IES files for this and otherphotometric options can bedownloaded online atwww.lightingproducts.philips.com
Ceiling: 80 70 50 0RCR
Wall: 70 50 30 10 70 50 30 50 30 10 00 101 101 101 101 90 90 90 70 70 70 251 92 88 85 81 82 79 76 61 59 57 222 84 77 71 67 75 69 64 54 50 48 183 77 68 61 56 68 61 55 47 43 40 164 70 60 53 47 62 54 47 42 38 34 135 64 53 46 40 57 48 41 37 33 29 126 59 48 40 34 52 43 36 34 29 25 107 54 43 35 30 48 38 32 30 26 22 98 50 39 31 26 45 35 28 27 23 19 89 47 35 28 23 42 32 25 25 20 17 710 44 32 25 20 39 29 23 23 18 15 6
Coefficients of Utilization (%)
Horizontal AngleVerticalAngle 0 45 90
55 4378 4346 453865 3513 3556 381775 2337 2479 254985 1262 1472 1682
Avg. Luminance (cd/m2)
Distribution
HHemispheremispheree 75% Up / 25% Down
PPeak/Zeak/Zenithenith 2.91
PPeak Oeak Outpututput 1642 cd
GlarGlare Ce Conontrtrolol Meets RP-1-12 recommendations for VDT-Critical spaces
BoldPlSusp_65lm_QN 06.18 page 4 of 5
-
BoldPlay suspended6500 lm/4ft 75% Up3000/3500/4000K
Optical Performance @ 120V
NominaNominal Sl Spec:pec: 3000K 3500K 4000K
Flux (lmFlux (lm)) 6180 6453 6636
EEfficfficaacy (lm/W)cy (lm/W) 108.6 113.8 117.5
PPoowwer (W)er (W) 56.9 56.7 56.5
CCCT (K)CT (K) 3045 3312 3931
CRICRI 84 82 83
R9R9 10 -1 5
xx 0.4338 0.4167 0.3849
yy 0.4031 0.3968 0.3837
DDuvuv 0.0000 0.0000 0.0020
Electrical Performance @ CRI>80, 3500K
Input VoltageInput Voltage 120V120V 277V277V 347V347V
Input PowerInput Power 56.7W 56.2W 56.9W
Input CurrentInput Current 0.47A 0.21A 0.17A
Power FactorPower Factor 0.995 0.987 0.970
Total Harm. DistortionTotal Harm. Distortion 9.4% 10.2% 11.0%
Tested values – contact technical support for rated values. Off-state powerzero unless certain controls are specified.
With SpaceWise DT, standby power 80, 3500K