projector mount bracket model no. et-pkd120b...english - 5 standard installation dimensions the...
TRANSCRIPT
-
TQZJ539-1
Model No. ET-PKD120B
Installation InstructionsProjector Mount Bracket
Thank you for purchasing this Panasonic product. ■ To customers
The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified personnel to perform the installation. After installation, have the installation personnel return these “Installation Instructions” to you, and save it for future use. When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.
■ To installation personnelRead the “Installation Instructions” thoroughly and then perform the operation correctly and safely. Be sure to read through the section entitled “Read this first!” (page 3) before proceeding with the installation.After installation, return these “Installation Instructions” to the customer.
* ThefigureaboveshowsacombinationofthisproductandtheseparatelysoldET-PKD120Sceilingmountbracket(forlowceilings).
* Unlessspecifiedotherwise,figuresintheseinstructionsshowacombinationwiththeceilingmountbracket(forlowceilings). Theinstallationmethodisalsothesameasthatoftheceilingmountbracket(forhighceilings).
-
2 - ENGLISH
Contents
Read this first! ................................................................................................... 3Product description ........................................................................................... 4Standard installation dimensions .................................................................... 5Installation ........................................................................................................ 10
Settingupthescreen ........................................................................................................ 10Screwstighteningtorques ................................................................................................ 10Installing the bracket to the projector ................................................................................ 10Attaching the drop prevention kit to the projector ..............................................................11
Specifications .................................................................................................. 12
-
ENGLISH - 3
Read this first!WARNING:Installation work should only be carried out by the certified personnel.
z If this product is not installed correctly, serious accidents may result. z Followtheinstructionsspecifiedin“Installation”ofthismanual,andperformsecureinstallation.
Do not install in a place which is not strong enough. z Iftheinstallationlocationisnotstrongenough,theceilingbracketmayfalldownandaninjurymayresult.
Make sure that your footing is safe and secure during installation. z Ifyourfootingisnotsecure,youmayfalldownordropthebracket,andaninjurymayresult.
Make sure that the ceiling bracket is installed correctly in accordance with the structure and materials used at the installation location.
z Ifamistakeismadeintheinstallationprocedure,theceilingbracketmayfalldownandaninjurymayresult.Do not loosen or remove the ceiling mount bracket screws or bolts unnecessarily.
z Theprojectormayfalldownandinjurymayresult.Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam.
z Usingtheprojectorundersuchconditionsmayresultinfire,electricshocksorplasticdeterioration.Theplasticdeteriorationmaycausethefallingdownoftheprojectorwhichismountedintheceiling.
Do not allow children to reach the attached metal fittings and screws. z Theattachedmetalfittingsandscrewscancausepersonalinjuryifswallowed. z Ifswallowed,seekmedicaladviceimmediately.
Mounting must be carried out by two or more persons. z Includingtheprojector,thisfixtureweighsatleast20kg(44.1lbs).Makesurethatmountingiscarriedoutbytwoormorepersons.
Do not disassemble or modify the ceiling mount bracket. z The projector may be damaged or fall, causing injury.
CAUTION:Install only the designated projector.Install only using the designated method.
z Otherwise,theprojectormayfallandbecomedamaged,andcauseinjury.Do not install the ceiling bracket in a place which may impede projector ventilation.
z Ifthisisnotobserved,firemayresult.Do not hang from or hang objects on the projector or ceiling mount bracket.
z The projector may fall and cause injury.When installing, always use the supplied components.
z Otherwise,thismaycausedamagedprojectortofallandcauseinjury.Install the mounting screws and power cable in such a way that they will not make contact with the inside parts of the ceiling.
z Electricshocksmayresultfromcontactwithanymetalobjectsinsidetheceiling.
■ Panasonic disclaims all liability for any accidents or any damage caused by the installation of the ceiling mount bracket using methods that are not described in these Installation Instructions or methods that do not use the parts specified in these Instructions.
■ If products are no longer being used, they should be dismantled and removed by the certified personnel as soon as possible.
Alwaysfollowtheseprecautions
-
4 - ENGLISH
Product descriptionThis is a ceiling mount bracket for installing projectors.
■ Applicable ceiling mount bracketsET-PKD120S/ET-PKD120H
■ Structural componentsParts name Form (number of parts) Applications
Projector mount bracket
×1
This is used to install the projector itself.It also includes a function for adjustingtheleft/righttilt.
Screwsandbolts These are used to mount the bracket onto the projector.
Hexheadbolt,captivewasher(M6×16) ×6
Droppreventionkit Prevents the ceiling mount bracket from falling.Flatwasher(M8) ×2 Wire rope ×1
z Storesmallpartsinanappropriatemanner,andkeepthemawayfromsmallchildren. z TighteningtorqueforthescrewsareM6:4±0.5N•m,M8:10±1N•m. zWhentighteningupthescrews,useatoolsuchasatorquescrewdriverortorquewrench.Donotuseelectricscrewdriversorimpactscrewdrivers.
Attention z Disposeofthepackagingmaterialsproperlyaftertakingtheproductoutofit.
-
ENGLISH - 5
Standard installation dimensionsThedimensionalrelationshipbetweenthescreenandtheprojectorisshownbelow.Establishthedimensionsafterassessingtheareapossibleforinstallation.
■ Ceiling mount brackets: ET-PKD120S / ET-PKD120H z Projectors:PT-DZ870/PT-DW830/PT-DX100
(whenusingtheceilingmountbracketforlowceilings)
(whenusingtheceilingmountbracketforhighceilings)
(Note)Thisdrawingisnotinexactscale.
Attention z Installtheprojectorwithatleast500mm(19-11/16")gapfromthesurroundingwallsorobjectsinordertoensurethattheairintake/exhaustportsoftheprojectorwillnotbeblocked. z Avoidsettingupinplaceswhicharesubjecttosuddentemperaturechanges,suchasnearanairconditionerorlightingequipment.
Note z Dependingontheproduct,theappearancemaydifferfromtheillustrationsintheseinstallationinstructions.
SH
SH
L (LW/LT)
109
(4")
220.
5(8
-11/
16")
109
(4")
239(9-13/32")
274(10-25/32")
SW
SW
SD
218
(8-1
9/32
")
107.5(4-7/32") 215
(8-15/32")
L1
Projected image
Ceiling
Screen
-
6 - ENGLISH
Standard installation dimensions (continued)
Theprojectiondistancecanbeadjustedusingthezoomlens.Checktheprojectedimagewhilemakingfineadjustments.
z InthecaseofPT-DZ870/PT-DW830/PT-DX100 Unit:mModelnumberofprojectionlens L1size(Approx.)
Standardzoomlens 0.043ET-DLE055 0.028ET-DLE085 0.084ET-DLE150 0.045ET-DLE250 0.045ET-DLE350 0.051ET-DLE450 0.095
-
ENGLISH - 7
Standard installation dimensions (continued)
■ Projection distance according to the projector lens.Fortheprojectiondistancesforprojectionlenses(optional),refertotheoperatinginstructions[Installation]providedwiththeprojector.Orcheckthediagonaldimension(m)ofyourprojectedimageandcalculatetheprojectiondistanceusingthefollowingformula.
z InthecaseofPT-DZ870 Unit:m
Lenstype Modelnumberofprojection lensAspectratio Projectiondistance(L)formula
Standardzoomlens —
16:10Minimum(LW) L=1.4906xSD(m)-0.0746Maximum(LT) L=2.0814xSD(m)-0.0725
16:9Minimum(LW) L=1.5320xSD(m)-0.0746Maximum(LT) L=2.1393xSD(m)-0.0725
4:3Minimum(LW) L=1.6874xSD(m)-0.0746Maximum(LT) L=2.3563xSD(m)-0.0725
Fixed-focuslens ET-DLE05516:10 — L=0.6893xSD(m)-0.047616:9 — L=0.7084xSD(m)-0.04764:3 — L=0.7803xSD(m)-0.0476
Ultra short focus zoom lens ET-DLE085
16:10Minimum(LW) L=0.6865xSD(m)-0.0471Maximum(LT) L=0.8498xSD(m)-0.0442
16:9Minimum(LW) L=0.7056xSD(m)-0.0471Maximum(LT) L=0.8735xSD(m)-0.0442
4:3Minimum(LW) L=0.7772xSD(m)-0.0471Maximum(LT) L=0.9621xSD(m)-0.0442
Shortfocuszoomlens ET-DLE150
16:10Minimum(LW) L=1.1259xSD(m)-0.0540Maximum(LT) L=1.6243xSD(m)-0.0498
16:9Minimum(LW) L=1.1572xSD(m)-0.0540Maximum(LT) L=1.6695xSD(m)-0.0498
4:3Minimum(LW) L=1.2747xSD(m)-0.0540Maximum(LT) L=1.8388xSD(m)-0.0498
Intermediate focus zoom lens ET-DLE250
16:10Minimum(LW) L=1.9665xSD(m)-0.0800Maximum(LT) L=3.1059xSD(m)-0.0792
16:9Minimum(LW) L=2.0212xSD(m)-0.0800Maximum(LT) L=3.1923xSD(m)-0.0792
4:3Minimum(LW) L=2.2263xSD(m)-0.0800Maximum(LT) L=3.5161xSD(m)-0.0792
Longfocuszoomlens ET-DLE350
16:10Minimum(LW) L=3.1000xSD(m)-0.1351Maximum(LT) L=4.6843xSD(m)-0.1346
16:9Minimum(LW) L=3.1862xSD(m)-0.1351Maximum(LT) L=4.8146xSD(m)-0.1346
4:3Minimum(LW) L=3.5094xSD(m)-0.1351Maximum(LT) L=5.3030xSD(m)-0.1346
Ultra long focus zoom lens ET-DLE450
16:10Minimum(LW) L=4.6931xSD(m)-0.3017Maximum(LT) L=7.4193xSD(m)-0.2991
16:9Minimum(LW) L=4.8236xSD(m)-0.3017Maximum(LT) L=7.6256xSD(m)-0.2991
4:3Minimum(LW) L=5.3129xSD(m)-0.3017Maximum(LT) L=8.3992xSD(m)-0.2991
Note z The values obtained from the above formulas may contain slight errors. z Thethrowratioisbasedonthevalueduringprojectionofa3.81m(150")sizeimage. zWhenGEOMETRYorKEYSTONEadjustmentisused,compensationismadesothattheprojectedimagesizebecomessmallerthanthespecifiedsize.
-
8 - ENGLISH
z InthecaseofPT-DW830 Unit:m
Lenstype Modelnumberofprojection lensAspectratio Projectiondistance(L)formula
Standardzoomlens —
16:10Minimum(LW) L=1.5651xSD(m)-0.0746
Maximum(LT) L=2.1855xSD(m)-0.0725
16:9Minimum(LW) L=1.6086xSD(m)-0.0746
Maximum(LT) L=2.2462xSD(m)-0.0725
4:3Minimum(LW) L=1.7715xSD(m)-0.0746
Maximum(LT) L=2.4736xSD(m)-0.0725
Fixed-focuslens ET-DLE055
16:10 — L=0.7237xSD(m)-0.0476
16:9 — L=0.7438xSD(m)-0.0476
4:3 — L=0.8191xSD(m)-0.0476
Ultra short focus zoom lens ET-DLE085
16:10Minimum(LW) L=0.7209xSD(m)-0.0471
Maximum(LT) L=0.8923xSD(m)-0.0442
16:9Minimum(LW) L=0.7409xSD(m)-0.0471
Maximum(LT) L=0.9171xSD(m)-0.0442
4:3Minimum(LW) L=0.8159xSD(m)-0.0471
Maximum(LT) L=1.0100xSD(m)-0.0442
Shortfocuszoomlens ET-DLE150
16:10Minimum(LW) L=1.1822xSD(m)-0.0540
Maximum(LT) L=1.7055xSD(m)-0.0498
16:9Minimum(LW) L=1.2151xSD(m)-0.0540
Maximum(LT) L=1.7529xSD(m)-0.0498
4:3Minimum(LW) L=1.3381xSD(m)-0.0540
Maximum(LT) L=1.9304xSD(m)-0.0498
Intermediate focus zoom lens ET-DLE250
16:10Minimum(LW) L=2.0649xSD(m)-0.0800
Maximum(LT) L=3.2612xSD(m)-0.0792
16:9Minimum(LW) L=2.1223xSD(m)-0.0800
Maximum(LT) L=3.3519xSD(m)-0.0792
4:3Minimum(LW) L=2.3371xSD(m)-0.0800
Maximum(LT) L=3.6912xSD(m)-0.0792
Longfocuszoomlens ET-DLE350
16:10Minimum(LW) L=3.2550xSD(m)-0.1351
Maximum(LT) L=4.9185xSD(m)-0.1346
16:9Minimum(LW) L=3.3455xSD(m)-0.1351
Maximum(LT) L=5.0553xSD(m)-0.1346
4:3Minimum(LW) L=3.6842xSD(m)-0.1351
Maximum(LT) L=5.5671xSD(m)-0.1346
Ultra long focus zoom lens ET-DLE450
16:10Minimum(LW) L=4.9277xSD(m)-0.3017
Maximum(LT) L=7.7903xSD(m)-0.2991
16:9Minimum(LW) L=5.0647xSD(m)-0.3017
Maximum(LT) L=8.0069xSD(m)-0.2991
4:3Minimum(LW) L=5.5775xSD(m)-0.3017
Maximum(LT) L=8.8174xSD(m)-0.2991
Note z The values obtained from the above formulas may contain slight errors. z Thethrowratioisbasedonthevalueduringprojectionofa3.81m(150")sizeimage. zWhenGEOMETRYorKEYSTONEadjustmentisused,compensationismadesothattheprojectedimagesizebecomessmallerthanthespecifiedsize.
Standard installation dimensions (continued)
-
ENGLISH - 9
z InthecaseofPT-DX100 Unit:m
Lenstype Modelnumberofprojection lensAspectratio Projectiondistance(L)formula
Standardzoomlens —
4:3Minimum(LW) L=1.4571xSD(m)-0.0746
Maximum(LT) L=2.0346xSD(m)-0.0725
16:9Minimum(LW) L=1.5875xSD(m)-0.0746
Maximum(LT) L=2.2167xSD(m)-0.0725
Fixed-focuslens ET-DLE0554:3 — L=0.6738xSD(m)-0.0476
16:9 — L=0.7340xSD(m)-0.0476
Ultra short focus zoom lens ET-DLE085
4:3Minimum(LW) L=0.6711xSD(m)-0.0471
Maximum(LT) L=0.8307xSD(m)-0.0442
16:9Minimum(LW) L=0.7311xSD(m)-0.0471
Maximum(LT) L=0.9051xSD(m)-0.0442
Shortfocuszoomlens ET-DLE150
4:3Minimum(LW) L=1.1006xSD(m)-0.0540
Maximum(LT) L=1.5878xSD(m)-0.0498
16:9Minimum(LW) L=1.1991xSD(m)-0.0540
Maximum(LT) L=1.7299xSD(m)-0.0498
Intermediate focus zoom lens ET-DLE250
4:3Minimum(LW) L=1.9224xSD(m)-0.0800
Maximum(LT) L=3.0361xSD(m)-0.0792
16:9Minimum(LW) L=2.0943xSD(m)-0.0800
Maximum(LT) L=3.3078xSD(m)-0.0792
Longfocuszoomlens ET-DLE350
4:3Minimum(LW) L=3.0304xSD(m)-0.1351
Maximum(LT) L=4.5791xSD(m)-0.1346
16:9Minimum(LW) L=3.3015xSD(m)-0.1351
Maximum(LT) L=4.9888xSD(m)-0.1346
Ultra long focus zoom lens ET-DLE450
4:3Minimum(LW) L=4.5876xSD(m)-0.3017
Maximum(LT) L=7.2526xSD(m)-0.2991
16:9Minimum(LW) L=4.9981xSD(m)-0.3017
Maximum(LT) L=7.9015xSD(m)-0.2991
Note z The values obtained from the above formulas may contain slight errors. z Thethrowratioisbasedonthevalueduringprojectionofa3.81m(150")sizeimage. zWhenGEOMETRYorKEYSTONEadjustmentisused,compensationismadesothattheprojectedimagesizebecomessmallerthanthespecifiedsize.
Standard installation dimensions (continued)
-
10 - ENGLISH
InstallationAftercheckingtheheight,width,andstructureoftheinstallationlocationwhilereferringto“Standardinstallationdimensions” on pages 5to9, determine the appropriate positions for setting up the screen and installing the projector.
Setting up the screenSetupthescreenaccordingtothespecifiedmethodinapositionwhichtakesintoaccounttheprojectiondistanceand angle and the type of screen being used.
Screws tightening torquesM6 ......... 4±0.5N•mM8 ......... 10±1N•m
z Useatorquescrewdriverortorquewrenchtotightenscrewsandboltstotheirspecifiedtighteningtorques.Donotuseelectricscrewdriversorimpactscrewdrivers.
Installing the bracket to the projectorAttachtheprojectormountbrackettotheprojector(soldseparately).
1)Placetheprojectorupside-downontoapieceofsoft material.
2)Turntheadjustmentleg(seethefigureontheleft)clockwisetominimizethelengthoftheleg.
z Iftheadjustmentleg(seethefigureontheleft) is long, the projector mount bracket comesincontactwiththelegandcannotbemounted onto the projector.
Projector mount bracket
Arrow
Secure in six places 3)Securetheprojectormountbrackettothebottomoftheprojectorusingthesixsuppliedcaptivewasherscrews(M6x16)asillustratedon the left.
-
ENGLISH - 11
Attaching the drop prevention kit to the projectorAttachthewireropetotheprojector(soldseparately).
Adjustment leg1)Turntheadjustmentleg(one)counterclockwiseto
remove it from the projector.
2) Passthesuppliedflatwasher(one)andwireropethroughtheadjustmentleg(one)asillustratedonthe left.
3) Turntheadjustmentlegclockwisetosecureittothe projector.
Note z Forinstallingtheceilingmountbrackets(forlowandhighceilings)(soldseparately)tothisbracketaswellasattachingthewireropetotheceiling,refer to the respective installation instructions.
Wire rope
Flat washer
Adjustment leg
Installation(continued)
-
SpecificationsExternal dimensions Width: 380 mm (14-31/32"), Height: 56 mm (2-7/32"),Depth: 362 mm (14-1/4")
Weight Approx. 2.5 (5.5 lbs.)
SS0513AM1047 -PSPrinted in Japan
https://panasonic.net/cns/projector/