projet mjp 5500x - 3d systems · projet® mjp 5500x composite multi-material 3d printer * maximum...
TRANSCRIPT
PROJET® MJP 5500XComposite multi-material 3D printer
* Maximum part size is dependent on geometry, among other factors.
ProJet MJP 5500X
Printing ModesHD ModeUHD ModeUHDS ModeXHD ModeXHDS Mode
High DefinitionUltra High Definition
Ultra High Definition-SingleXtreme High Definition
Xtreme High Definition-Single
Net Build Volume (xyz)* 20.4 x 15 x 11.8 in (518 x 381 x 300 mm)
Resolution (xyz)HD ModeUHD ModeUHDS ModeXHD ModeXHDS Mode
375 x 375 x 1000 DPI; 25 μ layers600 x 600 x 1600 DPI; 16 μ layers600 x 600 x 1600 DPI; 16 μ layers750 x 750 x 2000 DPI; 13 μ layers750 x 750 x 2000 DPI; 13 μ layers
Accuracy (typical) ±0.001-0.002 inch per inch (0.025-0.05 mm per 25.4 mm) of part dimension.Accuracy may vary depending on build parameters, part geometry and size, part orientation, and post-processing.
Build MaterialsVisiJet CR-CLVisiJet CR-WTVisiJet CE-BKVisiJet CE-NT
Rigid Plastic ClearRigid Plastic WhiteElastomeric Black
Elastomeric Natural
Support Material VisiJet S500 non-toxic wax material for hands- free melt-away supports
Material Packaging Build and support materials in clean 4.41 lbs (2 kg) bottles (printer holds 4 build and 4 support bottles with auto-switching)
Electrical 100 VAC, 50/60 Hz, single-phase, 15 Amps115 VAC, 50/60 Hz, single-phase, 15 Amps240 VAC, 50/60 Hz, single-phase, 8 Amps
Dimensions (WxDxH) 3D Printer Crated 3D Printer Uncrated
80 x 48 x 78 in (2032 x 1219 x 1981 mm)67 x 35.4 x 65 in (1700 x 900 x 1650 mm)
Weight 3D Printer Crated 3D Printer Uncrated
2550 lbs (1157 kg)2060 lbs (934 kg)
3DSPRINT™ Software Easy build job set-up, submission and job queue management; Automatic part placement and build optimization tools; Part stacking and nesting capability; Extensive part editing tools; Automatic support generation; Job statistics reporting tools
E-mail Notice Capability Yes
Network Compatibility Network ready with 10/100 Ethernet interface
Client Hardware Recommendation 1.7 GHz or better with 4GB RAMOpenGL 1.1 Compatible
1280x1024 resolution or better
Client Operating System Windows® 7, Windows 8 or Windows 8.1 (Service Pack)
Input Data File Formats Supported STL and CTL
Post-Processing ProJet Finisher XL for easy removal of eco-friendly wax supports
Operating Temperature Range 64-82 ºF (18-28 ºC)
Noise < 65 dBa estimated (at medium fan setting)
5-Year Printhead Warranty Standard
Certifications CE
VISIJET® BASE MATERIALS FOR THE PROJET MJP 5500XThe VisiJet composite family of materials is precisely mixed by the ProJet MJP 5500X print head on-the-fly to achieve superior mechanical properties and custom performance characteristics to meet your exacting specifications. This ingenuous system simultaneously prints and blends together flexible and rigid material composites, layer-by-layer at the pixel level, in a variety of colors and shades including opaque, clear, black or white and numerous shades of gray.
Properties Condition VisiJet CR-WT VisiJet CR-CL VisiJet CE-NT VisiJet CE-BK
Composition UV curable plastic UV curable plastic UV curable elastomeric material UV curable elastomeric material
Description Rigid ABS-like Rigid Polycarbonate-like Elastomeric Elastomeric
Color Opaque White Translucent Clear Translucent Natural Opaque Black
Bottle Quantity 2 kg 2 kg 2 kg 2 kg
Solid Density 1.18 g/cm3 1.18 g/cm3 1.12 g/cm3 1.12 g/cm3
Tensile Strength ASTM D638 37-47 MPa 37-47 MPa 0.2-0.4 MPa 0.2-0.4 MPa
Tensile Modulus ASTM D638 1000-1600 MPa 1000-1600 MPa 0.27-0.43 MPa 0.27-0.43 MPa
Elongation at Break ASTM D638 7-16 % 7-16 % 160-230 % 160-230 %
Flexural Strength ASTM D790 61-72 MPa 61-72 MPa N/A N/A
Flexural Modulus ASTM D790 1400-2000 MPa 1400-2000 MPa N/A N/A
Impact Strength (Notched Izod) ASTM D256 16-19 J/m 16-19 J/m N/A N/A
Shore A Hardness ASTM 2240 N/A N/A 27-33 27-33
Shore D Hardness ASTM 2241 76-80 76-80 N/A N/A
Water Absorption ASTM D570 24 hr 0.5% 0.5% 0.9% 0.6%
Heat Distortion Temperature D648 @ 0.45 MPa 46 °C 46 °C N/A N/A
Heat Distortion Temperature D648 @ 1.82 MPa 41°C 41 °C N/A N/A
Tear Resistance ASTM D624 N/A N/A 3.1 - 3.7 kN/m 3.1 - 3.7 kN/m
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications.The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
VISIJET® COMPOSITE COMBINATIONS FOR THE PROJET MJP 5500XIn addition to printing in pure base materials, the ProJet MJP 5500X can mix any two base materials together pixel-by-pixel to achieve your targeted properties, in up to twelve different composite ratios. An entire object can be printed in any of these composites, or a user can easily select a specific region of a part to be any number of different material combinations.
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications.The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CR-WT + VisiJet CE-BK)
Material Name RWT-EBK 100
RWT-EBK 150
RWT-EBK 200
RWT-EBK 250
RWT-EBK 300
RWT-EBK 350
RWT-EBK 450
RWT-EBK 500
RWT-EBK 550
RWT-EBK 600
RWT-EBK 650
RWT-EBK 700
Description Very Rigid Slightly Rigid Rigid Rigid Slightly
rigidSlightly
RigidSlightly flexible
Slightly flexible Flexible Flexible More
FlexibleVery
flexible
Appearance Very light grey
Lighter grey Light grey Light grey Light grey Light grey Medium
light grey Grey Medium dark grey Dark grey Darker
greyVery dark
grey
Tensile Strength D-638 18-27 MPa 14-19 MPa 11-14 MPa 8-11 MPa 5-9 MPa 4.5-8.5 MPa 3-6.6 MPa 1.7-3.7 MPa 1-3 MPa 0.7-2 MPa 0.6-1.8 MPa 0.3-1 MPa
Flexural Strength D-790 18-21 MPa 12-13 MPa 7-7.4 MPa 3.9-4.2 MPa 1.6-1.9 MPa N/A N/A N/A N/A N/A N/A N/A
Flexural Modulus D-790 450-750 MPa 350-550 MPa 150-250 MPa 70-180 MPa 30-80 MPa N/A N/A N/A N/A N/A N/A N/A
Impact Strength (Notched Izod) D-256 18-25 J/m 22-30 J/m 32-52 J/m 29-42 J/m 74-114 J/m N/A N/A N/A N/A N/A N/A N/A
Shore A Hardness, Scale A D-2240 N/A N/A N/A N/A N/A N/A 90 80 70 60 50 40
Shore D Hardness, Scale D D-2240 75 70 65 60 55 50 N/A N/A N/A N/A N/A N/A
Tear Resistance D-624 N/A N/A N/A N/A N/A N/A 44-62 kN/m 25-32 kN/m 18-23 kN/m 11-17 kN/m 6.6-9.3 kN/m 6.5-8.5 kN/m
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CR-CL + VisiJet CE-BK)
Material Name RCL-EBK 100
RCL-EBK 150
RCL-EBK 200
RCL-EBK 250
RCL-EBK 300
RCL-EBK 350
RCL-EBK 450
RCL-EBK 500
RCL-EBK 550
RCL-EBK 600
RCL-EBK 650
RCL-EBK 700
Description Very Rigid Slightly Rigid Rigid Rigid Slightly
rigidSlightly
RigidSlightly flexible
Slightly flexible Flexible Flexible More
FlexibleVery
flexible
Appearance Transparent Light Grey
Transparent Grey
Transparent Grey
Transparent Grey
Transparent Medium
Grey
Transparent Medium
Grey
Transparent Medium
GreyTranslucent
greyTranslucent
greyTranslucent
greyTranslucent darker grey
Translucent darker grey
Mechanical Properties Identical properties to VisiJet CR-WT + VisiJet CE-BK composites in table above
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CR-WT + VisiJet CE-NT)
Material Name RWT-ENT 100
RWT-ENT 150
RWT-ENT 200
RWT-ENT 250
RWT-ENT 300
RWT-ENT 350
RWT-ENT 450
RWT-ENT 500
RWT-ENT 550
RWT-ENT 600
RWT-ENT 650
RWT-ENT 700
Description Very Rigid Slightly Rigid Rigid Rigid Slightly
rigidSlightly
RigidSlightly flexible
Slightly flexible Flexible Flexible More
FlexibleVery
flexible
Appearance Translucent White
Translucent White
Translucent White
Translucent Amber
Translucent Amber
Translucent Amber
Light Amber
Medium Amber
Medium Amber
Darker Amber
Darker Amber
Darker Amber
Mechanical Properties Identical properties to VisiJet CR-WT + VisiJet CE-BK composites in table above
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CR-CL + VisiJet CE-NT)
Material Name RCL-ENT 100
RCL-ENT 150
RCL-ENT 200
RCL-ENT 250
RCL-ENT 300
RCL-ENT 350
RCL-ENT 450
RCL-ENT 500
RCL-ENT 550
RCL-ENT 600
RCL-ENT 650
RCL-ENT 700
Description Very Rigid Slightly Rigid Rigid Rigid Slightly
rigidSlightly
RigidSlightly flexible
Slightly flexible Flexible Flexible More
FlexibleVery
flexible
Appearance Translucent Clear
Translucent Clear
Translucent Clear
Translucent Amber
Translucent Amber
Translucent Amber
Light Amber
Medium Amber
Medium Amber
Amber Clear
Amber Clear
Amber Clear
Mechanical Properties Identical properties to VisiJet CR-WT + VisiJet CE-BK composites in table above
VISIJET® COMPOSITE COMBINATIONS Continued
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use. © 2016 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. The 3D Systems logo, ProJet and VisiJet are registered trademarks of 3D Systems, Inc.
04-16
USATel: +1 803.326.3900
UKTel: +44 1442 282 600
Germany, Scandinavia, Eastern Europe, Middle EastTel: +49 6151 357 0
Asia-PacificMelbourne Tel: +61 3 9819 4422Sydney Tel: +61 2 9516 5571
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications.The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
www.3dsystems.com
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CE-BK + VisiJet CE-NT)
Material Name EBK-ENT 100 EBK-ENT 200 EBK-ENT 300 EBK-ENT 400 EBK-ENT 500 EBK-ENT 600 RCL-ENT 700
Description Very flexible Very flexible Very flexible Very flexible Very flexible Very flexible Very flexible
Appearance Translucent Black Translucent Black Translucent Grey Light Grey Light Grey Light Amber Light Amber
Mechanical Properties Similar properties to VisiJet CE-NT or VisiJet CE-BK base materials
PROPERTIES ASTM MULTI-MATERIAL COMPOSITES (VisiJet CR-CL + VisiJet CR-WT)
Material Name RCL-RWT 100 RCL-RWT 200 RCL-RWT 300 RCL-RWT 400 RCL-RWT 500 RCL-RWT 600 RCL-RWT 700
Description Rigid ABS-like Rigid ABS-like Rigid ABS-like Rigid ABS-like Rigid ABS-like Rigid ABS-like Rigid ABS-like
Appearance Transparent Pale White
Transparent White
Transparent White
Translucent White
Translucent White Opaque white Opaque bright
white
Tensile Strength D-638 37-47 MPa 37-47 MPa 37-47 MPa 37-47 MPa 37-47 MPa 37-47 MPa 37-47 MPa
Tensile Modulus D-638 1000-1600 MPa 1000-1600 MPa 1000-1600 MPa 1000-1600 MPa 1000-1600 MPa 1000-1600 MPa 1000-1600 MPa
Elongation at Break D-638 7-16 % 7-16 % 7-16 % 7-16 % 7-16 % 7-16 % 7-16 %
Flexural Strength D-790 61-72 MPa 61-72 MPa 61-72 MPa 61-72 MPa 61-72 MPa 61-72 MPa 61-72 MPa
Flexural Modulus D-790 1400-2000 MPa 1400-2000 MPa 1400-2000 MPa 1400-2000 MPa 1400-2000 MPa 1400-2000 MPa 1400-2000 MPa
Heat Deflection Temperature D-648 @ 0.45 MPa" 46 °C 46 °C 46 °C 46 °C 46°C 46 °C 46 °C
Impact Strength (Notched Izod) D-256 16-19 J/m 16-19 J/m 16-19 J/m 16-19 J/m 16-19 J/m 16-19 J/m 16-19 J/m
Shore Hardness (D), Scale D D-2241 76-80 76-80 76-80 76-80 76-80 76-80 76-80