proline configuration handbook - nvent · 2018. 5. 25. · cooling fan package includes fan, air...

ProLine Configuration HandbookEngineered for Industrial EnvironmentsFreestanding, Disconnect, Type 12/IP55

2 | nVent.com/HOFFMAN

Flexibility and Protection ProLine is a robust enclosure solution that provides powerful mounting options and expansion capabilities. Engineered for industrial environments, ProLine features an innovative modular design which offers users:

• Faster population • Larger mounting panels • More mounting options • More efficient use of interior space • Larger door openings• Easier panel loading • Simple ganging/joining options • Streamlined field modifications • Improved interior access• Reduced freight costs

Custom Solutions with Standard Components ProLine features a comprehensive set of standard components and accessories. These standard components can be used to create a custom enclosure uniquely suited to your application. This configuration handbook can be used to review some of our most popular ProLine accessories options.

How to Use This HandbookStep 1: Select

Circle or check the components that you need.

SELECT YOUR FRAME TYPE, HEIGHT, WIDTH AND DEPTH

Select Frame Type Circle Height (mm) Circle Width (mm) Circle Depth (mm)

√ Single-Bay Frame 700 600, 800 600

1400 600, 800 500, 600, 800

1600 600,700, 800 400, 500, 600, 800

1800 600, 700, 800, 1000 400, 500, 600, 800

2000 400, 600, 700, 800, 1000 400, 500, 600, 800

2200 600, 700, 800, 1000 500, 600, 800, 900

Double-Bay Frames 700 1200 600

1600 1200 400, 500, 600, 800

1800 1200, 1600 400, 500, 600, 800

2000 1200, 1600 400, 500, 600, 800

2200 1200 500, 600, 800

Step 2: Send

Give a hardcopy or send a scanned copy of the configuration handbook to your nVent HOFFMAN representative who will work with you to configure the ProLine modular enclosure solution that best fits your needs.

QUESTIONS? Have questions about components or configuration? Pages 9 and 10 of this handbook have a brief description of each component. Additional information can be found in the Specifier’s Guide which you can download on the HOFFMAN web site. Or, feel free to contact one of HOFFMAN’s enclosure experts who will provide application advice and help you configure your enclosure.

Web: http://www.nVent.com/HOFFMAN Email: [email protected] HOFFMAN-USA - 763 422 2211 HOFFMAN-INTL - 763 422 2570

nVent.com/HOFFMAN | 3

Enclosure Need OverviewProject Name: Company:

Contact Name: Contact Information (email/phone):

SELECT YOUR FRAME TYPE, HEIGHT, WIDTH AND DEPTH

Select Frame Type Circle Height (mm) Circle Width (mm) Circle Depth (mm)

Single-Bay Frame 700 600, 800 600

1400 600, 800 500, 600, 800

1600 600,700, 800 400, 500, 600, 800

1800 600, 700, 800, 1000 400, 500, 600, 800

2000 400, 600, 700, 800, 1000 400, 500, 600, 800

2200 600, 700, 800, 1000 500, 600, 800, 900

Double-Bay Frames 700 1200 600

1600 1200 400, 500, 600, 800

1800 1200, 1600 400, 500, 600, 800

2000 1200, 1600 400, 500, 600, 800

2200 1200 500, 600, 800

Number of Enclosures:

Do you need an EMC frame? Yes No

Do you need to join/gang your enclosures? Yes No

Paint Grey* Other

*7035 textured light-gray polyester

Environmental Rating: NEMA 12 NEMA 1 Other

Exterior Solutions

Solid Door Window DoorSolid Cover Double Door Dress Frame Disconnect Doors

CIRCLE YOUR FRONT, REAR AND SIDES

Front Solid Cover Solid Door Window Door Double Door Dress Frame Disconnect Door No Door/Cover

Rear Solid Cover Solid Door Window Door Double Door Dress Frame Disconnect Door No Door/Cover

Left Side* Solid Cover Solid Door Dress Frame No Door/Cover

Right Side* Solid Cover Solid Door Dress Frame No Door/Cover

Options EMC EMC Polycarbonate or Safety Glass

*Left/right determined while looking at front of enclosure

Other


Exterior Solutions

SELECT YOUR TOP/ROOF

Solid Top Vented Top w/Integral Fan Tray

Pagoda Top High Performance Pagoda Exhaust Vent

No Top

Solid Top EMC Vented Top w/integral Fan Tray EMC

High Performance Pagoda Exhaust Vent EMC

Other

SELECT YOUR BASE

Solid Base 100 mm Solid Base

100 mm Plinth Base

Transportation Base

Mobile Base

No Top

Solid Base EMC 100 mm Solid Base EMC

200 mm Plinth Base

Other

SELECT YOUR BASE ACCESSORIES (OPTIONAL)

Solid Gland Plate

Filtered Gland Plate w/Vented Plinth Base Covers

Cable Entry Gland Plate

Frame Floor-Mounting Bracket

Casters Frame Feet

Levelers

Solid Gland Plate EMC

Other

INTEGRATED COOLING SOLUTIONS

Cooling Fan and Exhaust Package

Nominal Fan Size (mm/in)

100/4 150/6 250/10 EMC option

Top Mount Air Conditioner

(BTU/hr)

2200

4000

Sprectracool Slim Fit Air Conditioner

(BTU/hr)

1000 1700 3400 5000

6800 8500 13500


Exterior Solutions

SELECT YOUR HANDLE (OPTIONAL)

Flush Swing Handles Key Inserts

Handle with Screwdriver Defeater

Flush Bezel with Insert

L Handle 7-mm triangle Other

Handle with Keylock Small Flush Bezel with Insert

8-mm triangle

Handle for Padlock 7-mm square Handle with DIN

Profile Provision 8-mm square

Small Flush Swing Handle

Double-bit with 3-mm pin

Double-bit insert

SELECT YOUR DOOR ACCESSORIES

Door Stop Kit Electrical Interlock (shown)

Thermoplastic Data Pocket (shown)

Folding Shelf (Door)

Door Bar Grid Straps

Other

Mechanical Interlock

Steel Data Pocket

SELECT YOUR EXTERIOR ACCESSORIES

Window Kits

Lifting Eyes Lifting Angles Hole Seals (mm)

micro 22.5 30.5

Hole Seals (Inch)

½ ¾ 1 1¼ 1½ 2 2½ 3 3 ½ 4

Inch 7.5x5.5 11.5x8 15.5x5.5 15.5x10.5 19.5x8 19.5x13.5 25.5x17.5 31.5x21.5 37.5x25.5

(mm)(191x140)(292x203)(394x140)(394x267)(495x203)(495x343)(648x445)(800x546)(953x445)

Syspend Monitor and Keyboard Arm

Qty Qty


Interior Solutions

SELECT YOUR PANEL MOUNT SOLUTIONS (OPTIONAL)

Full Mounting Subpanel

Partial Subpanel Height

Swing Out Subpanel

Side-Mount Subpanel

Joining Subpanel

Other

Full Mounting Subpanel Conductive

Partial Subpanel Conductive Height

Swing Out Subpanel Conductive

Side-Mount Subpanel Conductive

Joining Subpanel Conductive

SELECT YOUR RACK OR GRID MOUNT SOLUTIONS (OPTIONAL)

Grid Strap (Pair) Vertical Grid Strap (Pair) Rack Angle (Pair)

One Row Hole Pattern Three Row Hole Pattern 19” 23” 24” Other

Two Row Hole Pattern Metric (mm)

1275 1475 1675 1875 2075

Three Row Hole Pattern Square Hole Tapped Hole

Qty* *Number of pairs



Heavy-Duty Swing-Out Rack Frame Rack Panels

SELECT YOUR HEAVY-DUTY SWING-OUT RACK OPTIONS

Heavy-Duty Swing-Out Rack Frame

Frame Width (mm) 600 700 800

Rack Angle Units 10 25 30

34 39 43

Other

SELECT YOUR RACK PANEL OPTIONS

Rack Panels

Material Aluminum Steel

Rack Angle Size 19” 23” 24”

Rack Angle Units 1 2 3 4 5 6 7 8 9 10 11 12 16

Other


Interior Solutions

SELECT YOUR INTERIOR ACCESSORIES (OPTIONAL)

Additional Grounding Kit

Additional Grounding Bar system

Select your LED Light Options

Power AC DC Switch On/off Motion Mounting Screw Magnetic

Door-Activated Light Kit

60mm Busbar System System Voltage

(Voltage, AC or DC) Wiring configuration

(1,2,3,4, or 5 wire system) Total Current

SELECT YOUR SHELF/COMPARTMENT (OPTIONAL)

Frame Shelf Pull-Out Shelf Rack-Angle Mounted Drawer

Keyboard Shelf

Keyboard Compartment

Consolet Compartment

SELECT YOUR HIGH PERFORMANCE OPTIONS (OPTIONAL)

Barrier Panel Panel Support Brace Transformer Rails Center Upright

Barrier Panel EMC


Cable Management Solutions

SELECT YOUR PANEL CABLE MANAGEMENT OPTIONS (OPTIONAL)

Cable Entry Cabinet (mm)

1600 x 500

1600 x 600

1600 x 800

1800 x 600

1800 x 800

2000 x 500

2000 x 600

2000 x 800

2200 x 500

2200 x 500

ProLine Vertical Cable Manager

Qty

Vertical Cable Manager 1

Qty

Vertical Tie-Down Cable Manager

Qty

Tie-Down Reducing Bracket

Qty

Basket Tray

Qty


Universal Power Strip Bracket

Wire Management Rails (set of 20)

D-Ring Cable Managers (set of 10)

Universal D-Ring Bracket (set of 10)

8” VELCRO® Cable Wrap (set of 10)

Qty Qty Qty Qty 12” VELCRO® Cable Wrap


Frame Tie-Down Bracket (set of 10)

Cable Spools (set of 10)

Fiber Management Spool (set of 4)

Strut Cable Rings (set of 10)

Universal Transition Bracket (set of 8)


EXTERIOR SOLUTIONSSingle-Bay Frame12 gauge solid steel frame with fully welded corners. Rectangular holes that accommodates the 25 mm DIN standard. EMC options available.Double-Bay FrameWelded back center post. No front center post for easy component installation. EMC options available.Solid CoverSteel cover for front/rear/side with a foam-in place urethane gasket and two grounding studs. EMC options available.Solid DoorSteel door with reversible hinge, foam-in-place urethane gasket and two grounding studs. A removable door bar grid strap system is included on doors taller than 700 mm and wider than 400 mm. EMC options available.Window DoorChoice of safety glass or polycarbonate window to enable viewing of electronic equipment. A foam-in-place urethane gasket, hidden hinges, and two grounding brackets. Double DoorOverlapping doors are used on double-bay frames. Removable door bar grid strap is included on doors taller than 700 mm.Dress FrameProvides a decorative trim when a front door or cover is not used.Disconnect DoorProvide a means to mount flange-mount disconnects. Hinged mullion provides unobstructed access to interior, easing equipment installation. Variety of ‘preferred’ cutouts designed for use with many commercially available disconnect switches and circuit breakers from a wide variety of manufacturers including: Rockwell Allen-Bradley, ABB Controls, Eaton Cutler-Hammer, General Electric, Siemens and Schneider. Large cutout options to accommodate larger disconnect switches and larger circuit breaker operating handles. Solid TopUsed to close the top opening on an enclosure frame. Has a foam-in place urethane gasket and two grounding studs. Bolts are included to hold the top in place (lifting eyes can be used instead of bolts). EMC options available.Vented Top w/Fan TrayProvides a cooling/ventilation solution. An integral fan tray with three pre-wired and mounted fans provides up to 200-300 CFM of exhaust. The vented top is designed to be used in place of a standard top. Bolts are provided to secure vented top to frame. The enclosure can be lifted with a vented top installed (requires accessory lifting eyes). EMC options available.Pagoda TopFeatures a drip-proof raised pagoda vent with an integral axial exhaust fan. Double-bay Pagoda Tops have one drip-proof raised pagoda vent opening positioned over one bay that can be oriented for right or left ventilation. Bolts secure pagoda top to frame (lifting eyes can be used instead of bolts).Cooling Fan and Exhaust PackagesEngineered for 50,000 hours of continuous operation without lubrication or service. Cooling fan package includes fan, air filter, composite air plenum, finger guard and grille. Exhuast package includes air filter, filter retainer with integral finger guard and grille. EMC options available.High Performance Pagoda Exhaust VentFeatures an integral centrifugal blower mounted in a housing that includes a drip-proof removable hood, wire mesh finger guard, perimeter gasket and terminal block. EMC options available.Spectracool Slim Fit Indoor Air ConditionerTop Mount Air ConditionerAvailable with cooling capacities of 2200 and 4000 BTU/hr. Equipped with an adjustable thermostat for optimal enclosure temperature regulation. Require no hole cutting or special kits for installation.0mm Solid BaseCover for the base of an enclosure. EMC options available.100 mm Solid Base 100 mm cover for base of enclosure. Side gland plates and drill points for locating optional casters are included. EMC options available.Plinth BaseProvides space for cables to enter from below. Consists of four cast aluminum corner supports connected to four 16 gauge steel access panels. A gland plate system must also be used to provide Type 12 protection.Transportation BaseProvide safe transportation for frames, from a single bay up to a maximum of 3000 mm (118.11 in.) in a multiple-bay system. Unique design allows ROL-A-LIFT lifting access from each end. A removable gland plate allows wire access between bases.Mobile BaseExtend beyond the front and rear of cabinets to provide enhanced stability. Fastens to the underside of the frame and provides integral mounting of furnished casters. The front and rear top surfaces of the base are trimmed with black rubber mats 3 mm thick. Four non-locking casters provide a load-bearing capacity of 1000 lb. (453.6 kg).

Solid Plate Gland PlateUsed to seal the bottom of the frame. Consists of a base mounting surface and two adjustable foam-gasketed plates that permit cable entry. The plate can be rotated 180 degrees for front or rear cable entry. EMC options available.Filtered Gland PlateUsed to seal the bottom of the frame. Consists of a mounting base, three adjustable plates for cable entry, a filter and filter retaining rails. Vented plinth base covers are installed in the front and rear openings.Cable Entry Gland PlateAdjustable opening for cable entry is foam-lined to maintain a dust-tight seal. Fits all 100 mm solid base gland openings. Can be used in place of standard solid gland plates furnished with 100 mm solid Base. Frame Floor-Mounting BracketProvides a structural method of bolting a frame to the floor. Fits all frame sizes. CastersSet of four casters (two locking, two non-locking) that mount directly to the bottom of a frame, 0 mm, or 100 mm solid base (do not use on plinth bases.) Casters elevate the enclosure 110 mm (4.33 in.) when installed. A set of four casters supports a maximum load of 454 kg (1000 lb.).Frame FeetFour die-cast feet for use on the bottom of frames that raise the frame 9 mm.LevelersFour post-type levelers allow adjustment for uneven floors. Can be attached to the bottom of a frame or to a 0-mm solid base. Adjustable for 17 mm to 35 mm height. Ball and socket construction. Four levelers will support a maximum of 453.6 kg (1000 lb.)Flush Swing HandleErgonomically designed to provide style and function in a low profile. Handle can be installed to rotate either clockwise or counterclockwise and can have a custom logo. Flush Bezel HandleLow profile handle with tool-to-open operating mechanism. Provided with a screwdriver slot insert and can have a custom logo.L HandleStylish option with key lock and two keys. Can be installed to rotate either clockwise or counterclockwise and can have custom logo.Key InsertsUsed with flush bezels. Optional for any solid, window or disconnect door.Door Stop KitHolds doors open at 130 degrees. Mounts without drilling and includes all necessary mounting hardware.Electrical InterlockProvides positive internal safety lockout on electrical enclosures. When energized, these interlocks prevent the door handle from being turned to open the door.Mechanical InterlockCan be actuated by any ProLine solid or disconnect door in a multiple-bay enclosure system. Up to ten doors, including window doors, can be interlocked. Meets interlocking requirements established by General Motors, Ford and Chrysler.Thermoplastic Data PocketProvides a convenient place to store wiring diagrams, operation manuals and other documentation inside the enclosure. Adhesive backed pockets mount inside the solid enclosure cover.Steel Data PocketFastens to the bottom of the door. Door Bar Grid Straps(purchased separately) must be used to change the vertical mounting position.Folding Shelf (Door)Mounts to door using the Door Bar Grid Straps (sold separately). Locks in two positions—90 degrees as a shelf and 15 degrees as a writing surface. Also mounts to three-row grid straps, side or back panel, or any flat surface. Holds up to 30 pounds.Door Bar Grid StrapsUsed to mount accessories to the door. Holds up to 100 pounds.Lifting EyesUsed for lifting enclosure and fastening top accessories to frame. Thread into corner blocks in frame. Set of four.Lifting AnglesDesigned for overhead lifting in conjunction with shackles and a spreader bar. Angle between the top of the enclosure and the cable or chain must be at least 45°.Hole SealsSeals extra pushbutton holes, conduit openings and knockout openings against dust, dirt, oil and water. Includes oil-resistant gasket.Window KitsSteel Window Kits have an acrylic window and are designed to be used on Type 4 and 12 enclosures. An oil-resistant gasket ensures a water-tight seal around the perimeter of the window and frame.Syspend Monitor and Keyboard ArmVertical motion pendant arm for mounting a flat screen monitor, keyboard and mouse in industrial environments. Display and keyboard can be raised and lowered with one hand. Supports 6-15 lb. loads with an internal gas spring counterbalance. Toggle lever locks arm in place when repositioned vertically. Arm swivels 340 degrees at monitor end and 180 degrees at mounting end. Display tilts forward 15 degrees and back 45 degrees to reduce glare. Folds up within 5 in. of the enclosure wall when not in use.

Component Descriptions


INTERIOR SOLUTIONSFull SubpanelDesigned to provide maximum panel size and be easy to install. Full subpanels slide into the frame on nylon glide blocks, which support the entire weight of the subpanel. Painted or galvanized.Partial SubpanelPartial subpanels can be positioned vertically in 25 mm increments and also can be positioned at any depth in 25 mm increments using the optional grid straps. Painted or galvanized.Swing-Out SubpanelAllows a front-mounted panel to pivot out of an enclosure frame opening. Spring-loaded pivot post allows for easy installation. Quarter-turn latches provided to secure the swing-out panel in the closed position. Painted or galvanized.Side-Mount SubpanelSide-mounted panels can be installed on the interior sides of frames. The panel and all the hardware needed to attach the subpanels to a frame are included. Painted or galvanized.Joining SubpanelProvides a continuous panel surface in multiple bay enclosures. The joining subpanel is inserted between full subpanels of equal height. It can be installed from front or rear. Holes for grounding and mounting hardware are provided. Painting or galvanized.Grid StrapsGrid straps can be used to mount accessories or equipment and also to create an internal grid system to allow flexible mounting capabilities in height, width and depth. Can be mounted front-to-back horizontally across the bottom or sides of the frame; left-to-right horizontally between front-to-back pair or from the sides of the frame; vertically between horizontally mounted grid straps.Vertical Grid StrapsProvide a vertical extension of the frame holes in the sides of the frame.Rack AngleAvailable in 19-, 23- and 24-in. configurations. All Rack Angles have two mounting surfaces that serve as mounts for both rack equipment and rack accessories. Can be mounted directly to the enclosure frame or on grid system straps at almost any depth location. Furnished in pairs. Max. 20 pound (9.1 kg) per rack unit for equipment under 20 inches (508 mm) deep.Heavy-Duty Swing-Out Rack FrameAllows 19 inch rack equipment to pivot out of the enclosure frame for better accessibility. Spring-loaded pivot post makes installation easy. Complies with ANSI/EIA RS-310-D rack-mounting standards. Maximum equipment load is 300 pounds.Rack PanelAvailable in aluminum and painted steel. All panels are flat with oblong holes positioned at EIA standard spacing. Grounding KitAllows a ProLine enclosure to be grounded to VDE specifications. Includes six 12-gauge wires 411 mm (16.19 in.) long with ring terminations and M6 mounting hardware.Grounding Bar SystemCopper plated grounding bars with M6 and M5 tapped holes provide a common point for grounding equipment. Includes insulated mounting brackets. LED Light KitProvides interior enclosure lighting with otions for screw mount (UL® compliant) or magnetic mount; AC or DC; on/off switch or motion sensor. Small form factor and low power consumption while providing 900 LM of 6500K light. Door-Activated Light Switch KitDoor-activated switch mounts to the frame and includes mounting hardware.Manual Light Switch KitManual switch mounts to the frame and includes mounting hardware.Frame ShelfMounts to the vertical hole pattern on a frame and provides a stationary surface for equipment.Pull-out ShelfAllows easy access to shelf-mounted devices. mounts to the front and rear frame uprights. Load rating is 110 pounds (50 kg).Rack-Angle Mounted DrawerSteel drawer for 19 inch rack-angle mounting mounts to the front surface of the rack angles. Integral steel box contains the drawer and protects surrounding internal equipment.Keyboard ShelfKeyboard Shelf is reversible, allowing two options for mounting keyboards. Hole and grommet in rear surface of shelf provide keyboard cable access into the enclosure.Keyboard CompartmentSelf-contained, sealed module that mounts to an accessory front opening. PC keyboard rests on a ball-bearing glide shelf with a soft palm-rest. Seamless foam-in-place gasket on door assures a dust-tight seal. Consolet CompartmentProvides sealed compartment for keyboard storage or protection for controls. Hinged door allows easy access to compartment. Door support holds door open at 90 degrees. Foam-in-place gasket on door and gasket around open rear surface extend the UL® and CSA rating to the consolet compartment interior.Barrier PanelDesigned to be used as a buffer between joined or ganged enclosure systems. When mounted to the enclosure, they maintain enclosure environmental integrity. EMC options available.

Panel Support BraceGives additional support to single- and double-bay panels in heavy loading applications. Minimizes the vibration created by components mounted on the panel. Can be installed on existing systems without removing the panel. Furnished in pairs.Transformer RailsUsed to mount heavy components and transformers in the bottom of an enclosure. Slotted to fit the integral mounting holes in the frame.Center UprightVertical channels that attach to the frame (top and bottom) to facilitate the installation of accessories for 600 mm wide frames and 19-inch rack accessories in wider frames. Furnished in pairs.60-mm Busbar SystemThe innovative design of the 60-mm busbar system reduces wiring time by up to 40 percent and allows power to be easily distributed to multiple components while being touch-safe rated to IP20. Pre-wired adapters and sliding DIN rails, enable components to be placed closer together while reducing the raceway and bending radius space required. With this arrangement, the 60-mm Busbar System consumes up to 25 percent less panel space than traditional wiring.

CABLE MANAGEMENT SOLUTIONSCable Entry CabinetFacilitate cable entry into the sides of enclosures. Open top and bottom of cabinet provide cable access and a means for managing cable. Closure plates, available as optional accessories, seal the open ends of the cabinet. Front opening of cabinet can be closed with either a hinged solid door or screw-on solid cover. Cabinets have a foam-in-place gasket to maintain environmental integrity.PROLINE Vertical Cable ManagerFor routing and bundling cable inside ProLine enclosures. Mounts between frame and rack angle so equipment can be centered or aligned on one side. Latching hinged door on front conceals wiring yet allows easy access. Movable plastic spools or fingers help manage cables.Vertical Cable Manager 1For routing and bundling cable inside cabinets. Wire form gate hinges open to ease wire routing. Mounts to grid strap or frame in front of rack angles.Vertical Tie-Down Cable ManagerProvides mounting holes for D-Rings, spools, universal transition brackets and other accessories (order separately). Includes hardware for mounting to strut and ten VELCRO cable wraps for fastening cable.Tie-Down Reducing BracketProvides convenient tie down for vertical or horizontal cable management. Allows front-to-back cable pass through. Supports optional D-Rings and wire management spools. Mounting hardware and ten VELCRO cable wraps included.Basket TrayMounts horizontally left-to-right in the frame. Can be installed either at the bottom of the frame or to the mounting strut and can provide an internal cable runway in a row of cabinets. Large 51 x 102 mm (2 x 4 inch) mesh allows cable installers to route cables in or out at any point.Universal Power Strip BracketFits in the corner of the frame and facilitates mounting a variety of power strips.Wire Management RailsFeatures a unique hole pattern that allows either wire ties or fasteners to secure wires in place. Frame-mounting hardware is included. One package contains 20 rails.D-Ring Cable ManagersD-Rings, can be used to manage cables horizontally, vertically or as they transition. Snap feature allows easy cable access as well as forming a tightly closed connection. Sold in sets of ten.Universal D-Ring BracketMounts D-Ring (order separately) on Vertical Tie-Down Cable Manager, ProLine, Front-to-Back D-Ring Bracket or grid strap. D-Ring locks into hole provided.VELCRO Cable WrapSecurely holds cable to cable manager and unfastens easily for cable maintenance. Sold in sets of ten.Frame Tie-Down BracketProvides an easy means to secure and bundle cables using any of the frame’s rectangular holes. Can be positioned parallel or perpendicular to the frame and needs no tools to install—just push into any hole and twist to fasten. Proper bend radius is easily maintained with the flexible VELCRO® tie-down. Sets of 10.Cable SpoolsSpools maintain minimum cable radius, direct cable and can be used with rack angles, grid straps, or patch panels for general cable management.Strut Cable RingsSnaps into the strut. Can be positioned vertically or horizontally. Ring snaps open and closed to easily position cables. It can be drawn down to snugly bundle cables. Sold in sets of ten.Universal Transition BracketProvides support for cable in transitions between horizontal and vertical routing. Mounts to strut, grid strap or Vertical Tie-Down Cable Managers. Can be used with VELCRO Cable Wrap (order separately).

Component Descriptions


FOUR Ways to Select Your ProLine

Option 1: Simple

PROLINE Preconfigured Industrial Packages

ProLine Preconfigured Industrial Packages are full-featured, ready-to-use enclosure solutions that make it unnecessary to order each component separately. For convenience, a single part number includes a frame, a solid front door, a rear cover, a top cover, a gland plate, lifting eyes and a full mounting subpanel, so only the side covers need to be ordered separately. The offering is rounded out by a large selection of off-the-shelf accessories. For more information on these pre-configured enclosures refer to the ProLine Modular Enclosure Solutions Brochure.

Fast

Fulfi

llmen

t Spe

ed S

cale

Mod

erat

e

TYPE 12 UL®/NEMA/CSA/EEMAC

IP55 IEC/VDE

• Reversible door (single or double)

• Top/roof

• Rear cover

• Full mounting subpanel

• Gland plate

• Lifting eyes

Option 2: Standard Configuration

Configure from Standard Parts

Build your enclosure from the ground up using standard parts detailed in this Configuration Handbook. Select your frame; then choose your top, base, sides and door(s). Next choose from an array of interior and exterior accessories designed to make your industrial modular enclosure easier to populate and easier to use.

Option 3: Custom Configuration

Configure from Standard Parts + Custom Paint + Holes/Cut-outs

Need a specific paint color or custom holes or cut-outs? You can add these requirements to your standard configuration with only a small effect on your first run delivery lead time.

Option 4: Modified

Configure from Modified Parts + Custom Paint + Holes/Cut-outs

Need something more unique? We will modify a ProLine Modular Enclosure to fit your specific application needs. This option includes special dimensions, integrated ventilation or cooling components, custom designed components or other unique requirements you may have. A strong engineering team and a global manufacturing organization support this service across the globe.

FREE FACTORY ASSEMBLY

Whether you need a standard preconfigured enclosure or a custom solution, ProLine enclosures can be assembled at the factory free of charge as part of HOFFMAN’s unique Assemble-To-Order (ATO) program.

Save time and hassle by using this free service offering.

• Factory assembly by certified professionals

• Preconfigured or custom solutions

• No fee

• Fast delivery

CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACEROur powerful portfolio of brands:

nVent.com/HOFFMAN

©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. BRO00183_1805

North AmericaMinneapolis, MN Tel: +1.763.421.2240Mexico City, Mexico Tel: +52.55.5280.1449Toronto, Canada Tel: +1.416.289.2770

South AmericaSao Paulo, Brazil Tel: +55.11.5184.2100Boitura, Brazil Tel: +55.15.3363.9148

EuropeBetschdorf, France Tel: +33.3.88.90.64.90Straubenhardt, Germany Tel: +49.7082.794.0Dzierzoniow, Poland Tel: +48.74.64.63.900Assago, Italy Tel: +39.02.5776151.224

Middle East & IndiaDubai, United Arab Emirates Tel: +971.4.378.1700Bangalore, India Tel: +91.80.6715.2001

AsiaShanghai, P.R. China Tel: +86.21.2412.6943Singapur Tel: +65.6768.5800Shin-Yokohama, Japan Tel: +81.45.476.0271Seoul, Korea Tel: +82.2.2129.7755Qingdao Tel: +86.532.8771.6101

proline configuration handbook - nvent · 2018. 5. 25. · cooling fan package includes fan, air...

Documents