prometheus · 2017-09-15 · prometheusprometheus benefits makes installation fast and repeatable;...
TRANSCRIPT
PROMETHEUSPROMETHEUS
BENEFITS
■ Makes installation fast and repeatable; Hang the enclosure, bolt down the base plate, connect wiring conduit to box and you’re ready to terminate even if the technician forgot the manual.
■ This provides easy connection for commercial power, ability to cut power within the box for maintenance and protects the customer’s investment in expensive electronic equipment.
■ This organizes wiring into repeatable patterns that ease terminations and troubleshooting.
■ This delivers rapid, reliable and organized terminations of field wires where all wiring points are available in one location.
■ Protects sensitive equipment from prying and tampering.
PRODUCT FEATURES
■ All equipment is secured to a custom removable base plate that is pre-assembled and wired at the factory with End-to-End termination using ferrules. All equipment, wiring harnesses, internal connections and typical wiring schematics are documented on a permanent label affixed to the inside door of each enclosure.
■ The products feature a simplified and integrated power design consisting of a switched power outlet, easy A/C line connectors, a ground bar, surge suppression, regulated DC power supply, fuse protected power distribution and a battery backup harness.
■ The terminal block assembly is made up of a cage clamp® screwless terminals arranged in a standardized color-coded layout.
■ Built-in cable management brings all field termination wires down in manageable vertical trunks and DC power is bused to the terminals for sensors.
■ Each enclosure includes integrated keyways and tamper switches.
PRODUCT OVERVIEW
With ease of installation in mind, the PSG family of custom
electrical enclosures is an installer’s dream. Our design
provides reliable, repeatable results reducing on-site
installation labor hours and a proven reduction in field
errors. Ranging from small to large form factors and using
only UL listed components, the PSG product is designed
for maintainability and manufactured in the USA.
If you have a custom need, our staff of knowledgeable
engineers can assist in designing an enclosure to fit your
specific application. Visit our website or contact our sales
team directly.
Custom Equipment Enclosures
DESIGNED WITH INSTALLATION & MAINTENANCE IN MIND
3019 Alvin Devane Blvd, Bldg 4, Suite 450, Austin, TX 78741512.247.3700 | 855.4.VICADS | [email protected]
www.psgglobal.net
Standardized Schematics:Sensor & Device Wiring
Standardized Schematics:Panel Layout, Power
Distribution & Harness Details
Integrated Keyway:Lock & Secure Equipment
Integrated Tamper:Industrial Cabinet
Tamper Switch & BracketWiring & Cable Management:
Cage Clamp® Screwless Contacts for Rapid &
Organized Terminations
Consolidated & Simplified Power Design:Switched Outlet, Easy A/C Line Connector, Ground Bar,
Surge Suppression, DC Supply, Fuse Protected Power Distribution, Sensor Power Distribution & Battery Backup Harness
Removable Base Plate & Unistrut Mounting Kit: Makes Hanging and Installing a Snap
Security Panel
Device Wiring Harnesses:Terminated End to End with Ferrules
for Reliable Connectivity
Man
ufac
ture
d Si
de
Fiel
d Te
rmin
atio
n Si
de
PSG INTRUSION DETECTION EQUIPMENT ENCLOSURE ORDERING INFORMATION
SPECIFICATION SIZE (H, W, D) CAPABILITY DESCRIPTION PART NUMBER
Small Form Factor IDS Equipment Enclosure
20”x 16”x 8” Supports one field device (V5 or 1500) with integrated power, tamper and lock but no cable management or harness support.
20-01020-000
Medium Form Factor IDS Equipment Enclosure
30”x 24”x 8” Supports one V5 or 2 1500s with all features. (Use MFF harnesses with this device.)
20-01010-000
MFF 1500 Harness N/A Supports cable management and connection of one sensor input module. 20-01014-000
MFF SIM Harness N/A Supports cable management and connection of one sensor input module. 20-01014-001
MFF ROM Harness N/A Supports cable management and connection of one relay output module. 20-01014-003
MFF PCM Harness N/A Supports cable management and connection of one portal control module. 20-01014-005
Large Form Factor IDS Equipment Enclosure (2 enclosures)
1—36”x 24”x 8” 1—36”x 30”x 8” 36”x 60”x 8”
Supports two V5s or 4 1500’s with all features. (Use LFF harnesses with this device)
Foot print required for both enclosures and 5” interconnect conduit
20-01000-00020-01001-000
LFF 1500 Harness N/A Supports cable management and connection of one sensor input module. 20-01004-000
LFF SIM Harness N/A Supports cable management and connection of one sensor input module. 20-01004-001
LFF ROM Harness N/A Supports cable management and connection of one relay output module. 20-01004-003
LFF PCM Harness N/A Supports cable management and connection of one portal control module. 20-01004-005
SPECIFICATION SIZE (H, W, D) CAPABILITY DESCRIPTION PART NUMBER
Small Form Factor ACS Equipment Enclosure
16”x 16”x 8” Supports from one to six access control door controllers with integrated power, tamper and lock but no cable management or harness support.
20-01050-001
Medium Form Factor ACS Equipment Enclosure
30”x 24”x 8” Supports from one to ten access control door controllers with all features. (Use MFF harnesses with this device.)
20-01040-001
MFF MR-50 Harness N/A Supports cable management and connection of one door controller module. 20-01044-000
PSG ACCESS CONTROL EQUIPMENT ENCLOSURE ORDERING INFORMATION
Note: All field device panels, input modules and batteries must be ordered separately
Note: The controlling ACS panel requires its own enclosure or these ACS enclosures must be connected to an existing panel. All door controller modules and batteries must be ordered separately. Specifications are subject to change without notice.