properties and processing of thm wood - tu...
TRANSCRIPT
![Page 1: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/1.jpg)
Properties and processing of Wood
Densification by THM
Parviz Navi
Thematic Session “Modelling of THM treated
wood, Joined Action FP0802, FP0904
August 24, 2011, Helsinki
![Page 2: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/2.jpg)
contents
1- Compression methods
1.1 Open systems (atmospheric pressure)
1.2 Closed systems (pressurized gas environment)
1.3 Mixed systems
1.4 unidirectional (platen press)
1.4 Compression forming (Two-directional compression)
1.5 Isobar (membrane press, 3D)
![Page 3: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/3.jpg)
contents
2. Effects of THM processing on wood
2.1 Physical effects: Glass transition, Elasto-viscoplasticity,
and shape memory or compression set-recovery
2.2 Chemical : TH wood degradation, fixation set-recovery
2.3 Effects of THM parameters on wood properties
3. Conclusions
![Page 4: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/4.jpg)
1- Compression methods
1.1 Open systems (atmospheric pressure)
Schema of the process
THM densification with open-system process using an hydraulic
press with heated plates, moisture content is 15% maximum
![Page 5: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/5.jpg)
1.1 Open systems (atmospheric pressure)
Production of a rolled wooden tube in a mold (courtesy from P.
Haller)
a) charging b) Closing c) Forming
![Page 6: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/6.jpg)
1.1 Open systems
Example of tube construction
Tube Spruce, fabricated by densified
bended wood panels, Photo P. Haller
(2008) Filament winding of moulded tubes
(Haller, 2009)
![Page 7: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/7.jpg)
1- Compression methods
1.2 Closed systems (pressurized gas environment), THM treatment
Densifying Apparatus (pressure vessel) up to 150°C and saturated
steam: (a) closed condition, (b) open condition,1) chamber, 2) piston,
3) mould, 4) cover, 5) densified wood, (Navi & Girardet, 2000).
![Page 8: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/8.jpg)
1.2 Closed systems (pressurized gas environment)
Photograph of a THM
(pressure vessel or reactor)
together with control panels
Schematic representation of a
THM reactor showing ingoing
and outgoing streams to
cylindrical chambers
![Page 9: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/9.jpg)
1.2 Closed systems
Multi-layer THM reactor
![Page 10: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/10.jpg)
Diagram of THM processing (Treatment chamber) – 4 stages
![Page 11: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/11.jpg)
Forming a trunk by THM closed system
Photo of a two layered THM reactor, opened state.
Diameter of the cylinder is 20 cm.
![Page 12: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/12.jpg)
Densified trunk of pine (one dimensional)
Two cross-sections of one directional radial densified trunk of pine
after drying. The trunk after densificatin sawn into two parts and
dried. This shows cracks formed on the wood during drying
(Girardet and Navi, 2007)
![Page 13: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/13.jpg)
1.3 unidirectional densification
(a) (b)
(a) Spruce before densification
d= 430 kg/m3
(b) After densification
d= 1290 kg/m3
degree of densification 68 %
(c) Pine before densification
d= 490 kg/m3
(d) After densification
d= 1300 kg/m3
degree of densification 68 %
(Navi and Girardet)
(c) (d)
![Page 14: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/14.jpg)
Viscoelastic Thermal Compression device (VTC):
Diagram showing the press inside to the chamber, platens
and the specimen between the platens (F. Kamk)
1.3 unidirectional (platen press), VTC, (Mixed system)
![Page 15: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/15.jpg)
1.3 unidirectional (platen press), VTC, (Mixed system)
Large Viscoelastic Thermal Compression device (VTC):
Photograph of the interior of the chamber (Courtesy of F. Kamk)
![Page 16: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/16.jpg)
Viscoelastic thermal compression process
(VTC)
Phase 1 – steaming
Phase 2 – venting
Phase 3 – compression
Cooling – specimens are cooled under compression
![Page 17: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/17.jpg)
1.4 Compression forming (Two-directional compression)
THM apparatus (pressure vessel or reactor) and the internal
moulding block (Ito et al. 1998 )
![Page 18: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/18.jpg)
1.4 Compression forming (Two-directional compression)
• Transformation of a circular trunk to a square-section by two-
dimensional densification (Ito et al., 1998a)
![Page 19: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/19.jpg)
1.4 Compression forming (Two-directional compression)
Compressed Lumber Processing System
Temperature in the THM chamber during the post-processing
![Page 20: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/20.jpg)
1.4 Compression forming (multi-directional compression)
Photo of two pieces of densified wood fabricated by
“Compressed Lumber Processing system”
![Page 21: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/21.jpg)
1.5 Isobar (membrane press - 3D)
• This is a 3D densification referring to the
membrane press method (pressure vessel + a
flexible membrane and steam) where
compression occurs under three-dimensional
uniform applied stress. Constant fluid pressure
(isobaric) on the membrane causes
compression of substrate in regions with least
resistence, (F. Kamke).
![Page 22: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/22.jpg)
2. Effects of THM processing parameters on wood
2.2 Chemical : TH wood degradation
Samples are compressed at different temperatures between110°C
and 200°C in a closed system.
Degree of set-recovery of compressed samples measured under
water soaking-drying cycles (Heger, 2004).
![Page 23: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/23.jpg)
2.2 Chemical : TH wood degradation
Set-Recovery (R) of samples compressed at different temperatures between
110°C and 200°C at a compression rate of 10 mm/min (Heger, 2004).
![Page 24: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/24.jpg)
Sample of densified spruce
compressed to 35 %; detail of
a partially crushed earlywood
zone.
Sample of densified spruce
compressed at140°C under
saturated moisture conditions.
![Page 25: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/25.jpg)
2.2 Chemical : degradation of wood constituents
High temperature steam, chemically degrades
wood constituents (here only up to 200C° considered)
Chemical degradation of wood constituents
is function of Temperature, Moisture Content
and Processing Time.
In both Heat-treatment and THM wood
densification under the same T & H the
degradation is similar.
In THM densification the process needs water
or (steam).
![Page 26: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/26.jpg)
In wood at high temperatures, water plays three
important roles:
it makes hydrolysis possible
it ensures the mobility of the protons
it participates in the acidification of the reactive
medium
________________
Definition of hydrolysis : A chemical reaction in which
water is used to break down a compound; this is achieved
by breaking a covalent bond in the compound.
The most important of degradation is wood
hydrolysis (specially the hemicelluloses), function of
T, MC and t
![Page 27: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/27.jpg)
1- Hydrolysis of polysaccharides:
Treatments Man
Xyl Gal Ara Total
Reference (natural) 13.6 5.6 2.8 1.2 23.2
Densified 9.7 4.7 1.2 0.7 16.3
Densified and post-treated
(180°C, 30 min)
5.6 2.0 0.5 no-
traces
8.1
Densified and post-treated
(200°C, 5 min)
5.4 2.8 0.4 no-
traces
8.6
Quantitative analysis of hemicelluloses by GPC (gas
phase chromatography)
Percentages of the different neutral sugars in treated wood
after washing with water (the rest solved in water).
![Page 28: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/28.jpg)
2- Determination of the degree of polymerization of
cellulose by capillary viscometer (according to the AFNOR (NF G06-037)
Cellulose microfibrils are chemically more resistant
to the hydrolysis.
Degree of polymerization of three spruce samples
Treatments: densification densification densification
post-treatment at
180°C, 30 min
post-treatment at
200°C, 4 min
1533 947 837
![Page 29: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/29.jpg)
4- Index of crystallinity (CrI) of the cellulose and diameter (L) of cellulose crystallites
Treatment Temperatur
e (oC)
Time
(minutes)
CrI Diameter
, L
(Å)
No treatment - - 0.710 25.0
Densified 140 20 0.778 28.7
Densified and post-
treated under saturated
moisture conditions
140 60 0.809 31.3
-``- 140 120 0.804 31.3
-``- 140 180 0.830 32.5
Densified at 140°C and
post-treated under
saturated moisture
conditions
160
30
0.818 31.9
-``- 160 60 0.811 32.5
-``- 160 90 0.844 34.5
-``- 190 8 0.831 33.8
-``- 190 16 0.843 35.2
-``- 190 24 0.853 36.7
-``- 210 2 0.844 35.2
-``- 210 4 0.846 36.7
-``- 210 8 0.868 40.1
-``- 210 16 0.875 43.1
![Page 30: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/30.jpg)
5- Determination of the glass transition temperature (Tg) of lignin
by DSC (Differential Sweeping Calorimetry with a single scan)
Depending to temperature & time lignin condenses or
depolymerises
![Page 31: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/31.jpg)
What happens to wood after THM treatment
![Page 32: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/32.jpg)
Unity or integrity of wood (cellulose-hemicelluloses-lignin)
Covalent and hydrogen bands
![Page 33: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/33.jpg)
2.3 Effects of THM parameters on wood properties
The swelling of beech as a function of time (logarithmic scale) during
humidification : (a) before densification, (b) after densification by open
system (Huguenin & Navi, 1995).
![Page 34: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/34.jpg)
Shear strength of the initial wood (black) and wood
densified in a THM closed system (grey) for spruce and
maritime pine (average values) (Navi & Girardet, 2000).
![Page 35: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/35.jpg)
Brinel hardness of initial wood and densified wood in a THM
closed system for spruce, beech and maritime pine (average
values) (Navi & Girardet, 2000).
![Page 36: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/36.jpg)
Photograph of a specimen after fracture under tensile
testing (Navi & Heger, 2005).
Natural wood,
Wood densified at 140°C during 20 minutes
post-treated at 140°C for 3 hours, post-treated at 160°C for 1 hour,
post-treated at 180°C for 20 minutes, post-treated at 200°C for 4
minutes
From each type of sample, at least 10 specimens were tested in
tension.
MOR and MOE of THM wood
![Page 37: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/37.jpg)
Longitudinal tensile strength and Young´s modulus of densified
samples
20 mi. 3h. 1h. 20m. 4mi.
![Page 38: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/38.jpg)
Influence of stress level on properties of THM wood
0
25
50
75
100
125
150
175
200
0
1
2
3
4
5
6
7
8
9
10
0 100 200 300 400 500
Tem
pera
ture
[oC
]
Pre
ssu
re o
r S
tress [
MP
a]
Time [s]
Stress Steam Temperature
Kutnar and Kamke, 2010
![Page 39: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/39.jpg)
Load
[MPa]
Temperature
[°C]
Saturated steam
pressure
[psi]
Compression
loading steam
environment
Venting time
prior to
compression
[s]
5.5 150 68 Saturated steam 0
Superheated steam 180
Transient conditions 10
160 98 Saturated steam 0
Superheated steam 180
Transient conditions 10
170 114 Saturated steam 0
Superheated steam 180
Transient conditions 10
Kutnar and Kamke, 2010
Test parameters of each THM treatment
![Page 40: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/40.jpg)
Oven dry density after THM treatment
0
0.2
0.4
0.6
0.8
1
1.2
1.4
Transient Superheated steam Saturated steam
OD
density [g/c
m3]
150°C 160°C 170°C
Kutnar and Kamke, 2010
![Page 41: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/41.jpg)
0
1
2
3
4
5
6
7
8
9
10
Transient Superheated steam Saturated steam
Mois
ture
conte
nt
[%]
150°C 160°C 170°C
Moisture content of THM treated wood
after conditioning at 20°C and RH 65%
Kutnar and Kamke, 2010
![Page 42: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/42.jpg)
Treatment Temperature [°C] MOE
[GPa]
MOE/ρemc
[GPa cm3/g]
Untreated - 7.67 (1.06) 19.5 (1.35)
Saturated steam 150 11.6 (2.08) 20.3 (3.68)
160 22.9 (4.90) 20.3 (4.26)
170 28.7 (6.63) 24.8 (5.21)
Transient conditions 150 16.5 (4.80) 19.2 (4.34)
160 22.6 (5.91) 20.8 (3.12)
170 31.8 (3.01) 26.9 (2.92)
Superheated steam 150 11.6 (2.08) 15.8 (1.68)
160 15.8 (4.83) 18.4 (4.04)
170 19.6 (5.02) 18.2 (2.93)
MOE and MOE/ρemc of THM specimens
Kutnar and Kamke, 2010
![Page 43: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/43.jpg)
Treatment Temperature
[°C]
MOR
[MPa]
MOR/ρemc
[MPa cm3/g]
Untreated - 76.6 (10.9) 194 (9.60)
Saturated steam 150 222 (38.2) 193 (35.5)
160 219 (45.1) 194 (39.9)
170 249 (16.7) 215 (30.8)
Transient conditions 150 139 (42.0) 161 (36.7)
160 186 (55.4) 170 (19.6)
170 276 (16.7) 233 (16.3)
Superheated steam 150 101 (21.3) 137 (19.6)
160 140 (40.8) 164 (41.9)
170 171 (49.3) 158 (28.8)
MOR and MOR/ρemc of THM specimens
Kutnar and Kamke, 2010
![Page 44: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/44.jpg)
0
1
2
3
4
5
6
7
8
0 100 200 300 400 500 600
Time [s]
Ste
am
pre
ssu
re [
MP
a],
Co
mp
ressio
n s
tre
ss [
MP
a]
0
50
100
150
200
250
Te
mp
era
ture
[°C
]
Compression stress
Steam pressure
Temperature
Influence of post heat-treatment at 200°C
on properties of THM wood
Kutnar and Kamke, 2010
![Page 45: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/45.jpg)
MOR/ density post heat-treated THM wood at 200°C
Kutnar and Kamke, 2010
![Page 46: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/46.jpg)
Viscoelastic thermal compression process
(VTC)
Phase 1 – steaming
Phase 2 – venting
Phase 3 – compression
Cooling – specimens are cooled under compression Kutnar and Kamke, 2008
![Page 47: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/47.jpg)
MOR and MOE of VTC wood
0,0
20,0
40,0
60,0
80,0
100,0
120,0
140,0
160,0
180,0
Control VTC 63% VTC 98% VTC 132%
MO
R [
MP
a]
0,0
5,0
10,0
15,0
20,0
25,0
MO
E [
GP
a]
MOR [MPa] MOE [GPa]
Kutnar and Kamke, 2008
![Page 48: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/48.jpg)
Effect of densification temperature on
maximum bending strength (I) and tensile strength (II)
Fang C.H., Mariotti N., Cloutier A., Koubaa A., Blanchet P. 2011. Densification of
wood veneers by compression combined with heat and steam. Eur. J. Wood Prod.
DOI 10.1007/s00107-011-0524-4
aspen (black) and hybrid
poplar (grey).
![Page 49: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/49.jpg)
Effect of densification temperature on
MOE of bending (I) and tension (II) (?)
Fang C.H., Mariotti N., Cloutier A., Koubaa A., Blanchet P. 2011. Densification of
wood veneers by compression combined with heat and steam. Eur. J. Wood Prod.
DOI 10.1007/s00107-011-0524-4
aspen (black) and hybrid
poplar (grey).
![Page 50: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/50.jpg)
3.Conclusions 1. Research on wood densification still
needs the laboratory works
2. Few attempts has been made to
commercialize the technology with open
system
3. Domain is with high innovation because
of T,H,M & t effects on mechanical and
chemical degradation
4. Challenges exist on the moulding of large
scale elements
5. Need for a Numerical simulation of Virtual
processing of THM
![Page 51: Properties and processing of THM wood - TU Wiencost-fp0802.tuwien.ac.at/fileadmin/mediapool-cost/... · 1.4 Compression forming (Two-directional compression) • Transformation of](https://reader034.vdocuments.net/reader034/viewer/2022051914/600526d09dfb882a8b67aa92/html5/thumbnails/51.jpg)
Acknowledgment
Dr. Frederic Heger,
Mr. Fred Girardet
Dr. Andreja Kutnar