proportional flow control valve, with integrated pressure … · 2 days ago · 2/14 kudsr...

RE 18702, edition: 2016-02, Bosch Rexroth AG

Proportional flow control valve, with integrated pressure compensator

Features

▶ Mounting cavity R/UNF-16-03-0-06 ▶ Direct operated proportional valve for controlling the

flow size ▶ Operation by means of proportional solenoid with

central thread and detachable coil ▶ Rotatable solenoid coil ▶ With concealed manual override ▶ Screwable manual override with star handle, optional

Contents

Features 1Ordering code, valve types 2Available coils, symbols 3Function 4Technical data 5 ... 6Characteristic curves 7 ... 10Minimum terminal voltage at the coil and relative duty cycle 11Dimensions 12Mounting cavity 13Available individual components 14Further information 14

▶ Size 3 ▶ Component series A ▶ Maximum operating pressure 350 bar ▶ Maximum flow 120 l/min

RE 18702 Edition: 2016-02Replaces: 05.12

H7659

Type KUDSR

2/14 KUDSR | Proportional flow control valve

Bosch Rexroth AG, RE 18702, edition: 2016-02

Ordering code (valve without coil) 1)

01 Proportional flow control valve, with integrated pressure compensator, direct operated KUDS

02 Maximum operating pressure 350 bar R

03 Size 3 3

Symbol04

�

�

�

Flow in the main port ③

80 l/min C

60 l/min C1

40 l/min C2

05 Component series A

06 High Performance and mounting cavity R/UNF-16-03-0-06, see page 13 F

07 With concealed manual override 2) N9

Seal material08 FKM seals V

(other seals upon request) Attention! Observe compatibility of seals with hydraulic fluid used!

09 Further details in the plain text *

01 02 03 04 05 06 07 08 09

KUDS R 3 A / F N9 V *

Type Material no.

KUDSR3CA/FN9V R901255657

KUDSR3C1A/FN9V R901287409KUDSR3C2A/FN9V R901265879

Valve types (without coil) 1)

1) Complete valves with mounted coil on request.2) Screwable manual override with star handle "N14"

(separate order, material no. R913009058, see page 12).

Proportional flow control valve | KUDSR 3/14


3) Mating connectors, separate order, see data sheet 08006.4) Other voltages upon request.

Available coils (separate order) 1)

Direct voltage DC 4)

Material no. for coil with connector 3)

"K4" 03pol (2+PE)

DIN EN 175301-803

"K40" 02pol K40

DT 04-2PA, co. Deutsch

"C4" 02pol C4/Z30

AMP Junior-Timer12 V (1.8 A) R901022180 R901272648 R901022680

24 V (1.2 A) R901022174 R901272647 R901022683

detailed simplified

�

�

�

�

�

�

�

�

�

By closing the main port ② the valve can also be operated as a 2-way flow control valve.

Symbols

① = Main port 1 (P)② = Main port 2 (T)① = Main port 3 (A)

�

�

�

� �



GeneralThe proportional flow control valve is a direct operated screw-in cartridge valve in spool design with integrated pressure compensator. It regulates the flow proportionally to the input signal in a stepless form from main port ① to ②. Any excessive residual flow is led to the tank or to another actuator via port ②.The valve basically consists of housing, control spool, control spring, pressure compensator piston, orifice bush, pressure compensator spring as well as proportional solenoid (1) with central thread and detachable coil.

Function

Version "K40"

Version "C4"Version "K4" (with mating connector)

Type KUDSR3…

① = Main port 1 (P)② = Main port 2 (T)① = Main port 3 (A)

FunctionWith de-energized proportional solenoid (1), the control spool that is always pressure-compensated to the actuat-ing forces due to its structural design is held in the initial position by the control spring and blocks the flow between main port ① and ③. By energizing the proportional solenoid (1), the control spool is adjusted directly propor-tional to the electrical input signal and, via orifice-type cross-sections (with progressive flow characteristics), adjusts and connects the main ports ① and ③. Due to the integrated pressure compensator piston together with the pressure compensator spring, the pressure drop across the valve is kept constant, independent of the pressures at ①, ② and ③. In case of excessive flow from ①, the pres-sure compensator piston moves to the right and opens the connection ① to ②. In case of de-excitation of the propor-tional solenoid (1), the control spring returns the control spool into its initial position. The entire flow is now directly led from main port ① to main port ②The manual override (2) allows for the adjustment of the valve without solenoid energization.



Technical data (For applications outside these parameters, please consult us!)

1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components.

Available filters can be found at www.boschrexroth.com/filter.

hydraulic

Maximum operating pressure ▶ Main port ① bar 350Bypass pressure ▶ Main port ② bar 350 with qVmaxPrio pressure ▶ Main port ① bar 330 with … qVmaxControl pressure differential ▶ ① to ③ bar 12 … 15Minimum pressure differential ▶ ① to ③ bar > 10Maximum flow ▶ Main port ① l/min 120Rated flow ▶ ① to ③ l/min 80 (regulated)Leakage ml/min < 100 (with ∆p = 100 bar in ①; HLP46, ϑoil = 40 °C)Hydraulic fluid See table belowHydraulic fluid temperature range °C –40 … +100 (preferably +40 … +50)Viscosity range mm2/s 5 ... 400 (preferably 10 … 100)

Maximum admissible degree of contamination of the hydraulic fluid Cleanliness class according to ISO 4406 (c)

Class 20/18/15 1)

Load cycles Million 10

Hysteresis 2) % ≤ 5Range of inversion 2) % ≤ 2Response sensitivity 2) % ≤ 1

generalWeight kg 0.97Installation position Any - if it is ensured that no air can collect upstream of the valve.

Otherwise, we recommend suspended installation of the valve.Ambient temperature range °C (see page 11)Storage temperature range °C –20 … +80

Environmental audits

Salt spray test according to DIN 50021 h 720

Surface protection DC solenoids Coating according to DIN 50962-Fe//ZnNi with thick film passivation

Hydraulic fluid Classification Suitable sealing materials StandardsMineral oils HL, HLP FKM DIN 51524Bio-degradable ▶ Insoluble in water HEES FKM VDMA 24568

▶ Soluble in water HEPG FKM

Important information on hydraulic fluids: ▶ For more information and data on the use of other hydraulic fluids, please refer to data sheet 90220 or contact us!

▶ There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.)!

▶ The flash point of the hydraulic fluids used has to be 40 K above the maximum solenoid surface temperature.

▶ Bio-degradable: If bio-degradable hydraulic fluids are used that are also zinc-solving, there may be an accumulation of zinc.

2) Measured with analog amplifier type RA2-1/10 according to data sheet 95230 (PWM = 100 Hz).



Technical data (For applications outside these parameters, please consult us!)

electricVoltage type Direct voltage

Supply voltages 3) V 12 DC 24 DCMaximum solenoid current A 1.8 1.2

Coil resistance ▶ Cold value at 20 °C Ω 3.3 7.2

▶ Max. hot value Ω 5.8 13.0

Duty cycle % see characteristic curve page 11Maximum coil temperature 4) °C 150

Protection class according to VDE 0470-1 (DIN EN 60529) DIN 40050-9

▶ Version "K4" IP 65 with mating connector mounted and locked ▶ Version "C4" IP 66 with mating connector mounted and locked

IP 69K with Rexroth mating connector (material no. R901022127) ▶ Version "K40" IP 69K with mating connector mounted and locked

Control electronics (separate order) Analog amplifier moduletype VT-MSPA1...

Data sheet 30223

Plug-in proportional amplifiertype VT-SSPA1...

Data sheet 30116

Analog amplifier type RA... Data sheet 95230

BODAS control unit type RC... Data sheet 95200

Design according to VDE 0580

3) Other voltages upon request4) Due to the surface temperatures of the solenoid coils, the

standards ISO 13732-1 and ISO 4413 need to be adhered to!

When establishing the electrical connection, the protective earthing conductor (PE ) must be connected correctly.

�

�

�

�

��

�

�

�



Characteristic curves (measured with HLP46, ϑoil = 40 ± 5 °C and 24 V coil)

Flow in l/min →

Pres

sure

diff

eren

tial i

n ba

r →

∆p-qV characteristic curve – main port ① to ② (③ open, orifice closed)

� ��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��



Characteristic curves: Version "C" (measured with HLP46, ϑoil = 40 ± 5 °C and qV① = 80 l/min)

Load pressure in bar →


Command value in % →

Flow

in l/

min

→Fl

ow in

l/m

in →

Flow

in l/

min

→

Regulated flow at main port ③ as a function of the load pressure3-way function (main port ② open to the tank)

Regulated flow at main port ③ as a function of the load pressure2-way function (main port ② closed)

Regulated flow at main port ③ as a function of the command value

� ��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��



Characteristic curves: Version "C1" (measured with HLP46, ϑoil = 40 ± 5 °C and qV① = 60 l/min)




Flow

in l/

min

→Fl

ow in

l/m

in →

Flow

in l/

min

→




� ��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

�

��

��

��

��

��

��



Characteristic curves: Version "C2" (measured with HLP46, ϑoil = 40 ± 5 °C and qV① = 40 l/min)




Flow

in l/

min

→Fl

ow in

l/m

in →

Flow

in l/

min

→




��

��

�

�

�

��

��

��

��

��

��

��

�

�

��

��

��

��

��

��

��

��

�

�

��

��

��

��

��

��

��

��

�

�

��

��

��

��

��

��



Ambient temperature in °C →

Ambient temperature in °C →

Requ

ired

min

imum

vol

tage

at

the

coil

(1)

→Re

quire

d m

inim

um v

olta

ge a

t th

e co

il (1

) →

Redu

ced

duty

cyc

le fo

r I m

ax (

1.8

A)

in %

(2)

→Re

duce

d du

ty c

ycle

for

I max

(1.

2 A)

in

% (

2) →

Adm

issi

ble

cont

inuo

us a

pplic

atio

n of

cu

rren

t in

A w

ith 1

00 %

dut

y cy

cle

(3)

→Ad

mis

sibl

e co

ntin

uous

app

licat

ion

of

curr

ent

in A

with

100

% d

uty

cycl

e (3

) →

▶ Version "G12"

▶ Version "G24"

Admissible working range dependent on the ambient temperature

Limited valve performance

Minimum terminal voltage at the coil and relative duty cycle

Notices:The characteristic curves have been determined for coils with valve with medium test block size (80 x 80 x 80 mm), without flow in calm air.Depending on the installation conditions (block size, flow, air circulation, etc.) there may be a better heat dissipation. Thus, the area of application is broadened.In individual cases, more unfavorable conditions may lead to limitations of the area of application.

�

�

�

��

��

��

��

�

�

��

�

�

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��



Dimensions (dimensions in mm)

① = Main port 1 (P)② = Main port 2 (T)③ = Main port 3 (A)

LS = Location shoulder

1 Mating connector without circuitry for connector "K4" (separate order, see data sheet 08006)

2 Space required to remove the mating connector3 SW36, tightening torque MA = 165+15 Nm4 Dimension for "K4" mating connector, without circuitry5 Dimension () for "K4" mating connector, with circuitry6 Mating connector for connector "K40"

(separate order, see data sheet 08006)7 Mating connector for connector "C4"

(separate order, see data sheet 08006)8 Nut, tightening torque MA = 5+2 Nm9 Coil (separate order, see page 3)

10 Concealed manual override "N9"11 Screwable manual override with star handle "N14"

(separate order, see page 3)

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

�

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��



Mounting cavity R/UNF16-03-0-06; 3 main ports; thread 1 5/16-12 UN-2B (dimensions in mm)

1) Visual inspection

① = Main port 1 (P)② = Main port 2 (T)③ = Main port 3 (A)

LS = Location shoulder

All seal ring insertion faces are rounded and free of burrs



Bosch Rexroth AG HydraulicsZum Eisengießer 197816 Lohr am Main, Germany Phone +49 (0) 93 52 / 18-0 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

Available individual components

Item Denomination Material no.910 Nut R900029574920 Seal ring for pole tube R900002507999 Seal kit of the valve R961003236A Manual override "N14" R913009058

Coils, separate order, see page 3.

999

A920

910

Further information

▶ Control electronics: – Analog amplifier module type VT-MSPA1… Data sheet 30223 – Plug-in proportional amplifier type VT-SSPA1… Data sheet 30116 – Analog amplifier type RA… Data sheet 95230 – BODAS control unit type RC… Data sheet 95200

▶ Selection of the filters www.boschrexroth.com/filter

Bosch Rexroth AG HydraulicsZum Eisengießer 197816 Lohr am Main, Germany Phone +49 (0) 93 52 / 18-0 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.



Notes



Notes

RE 18702FeaturesContentsOrdering code (valve without coil)Valve types (without coil)Available coils (separate order)SymbolsFunctionTechnical data(For applications outside hydraulicTechnical data (For applications outsideelectricCharacteristic curves(measured with HLP4Characteristic curves: Version "C"(measuCharacteristic curves: Version "C1"(measCharacteristic curves: Version "C2"(measMinimum terminal voltage at the coil andDimensions(dimensions in mm)Mounting cavity R/UNF16-03-0-06; 3 main Available individual componentsFurther informationNotesNotes

proportional flow control valve, with integrated pressure … · 2 days ago · 2/14 kudsr...

Documents