protective covers/caps - topflite components

85 TopFlite Components, Inc. 800-219-2601 www.topflitecomponents.com Cage Code: 58MN7Precision Manufacturer of Connector Adapters & Accessories

PROTECTIVE COVERS/CAPS

AVAILABLE FOR BOTH PLUG AND RECEPTACLE CONNECTORS, PROTECTIVE COVERS PROTECT THE MATING SURFACES OF THE CONNECTOR FROM PHYSICAL DAMAGE AND SEAL THE CONNECTOR AGAINST PARTICLE AND MOISTURE CONTAMINATION. PROTECTIVE COVERS CONSIST BASICALLY OF A CYLINDRICAL BODY CLOSED AT ONE END.

SERIES DESCRIPTION PAGE

32 & 33 PROTECTIVE COVERS FOR MIL-DTL-38999 SERIES III 86

42 & 43 PROTECTIVE COVERS FOR MIL-DTL-5015 88

80 & 81 PROTECTIVE COVERS FOR MIL-DTL-26482 90

123 & 124 PROTECTIVE COVERS FOR VG95234 92

451 & 452 PROTECTIVE COVERS FOR MIL-DTL-38999 SERIES IV 94

501 & 502 PROTECTIVE COVERS FOR MIL-DTL-38999 SERIES I 96

510 & 511 PROTECTIVE COVERS FOR MIL-DTL-38999 SERIES II 98

591 & 601 PROTECTIVE COVERS FOR MIL-DTL-83723 SERIES III (THREADED) 100

592 & 602 PROTECTIVE COVERS FOR MIL-DTL-83723 SERIES III (BAYONET) 102

M11 & M12 PROTECTIVE COVERS FOR METRIC THREADS 104

S21 & S22 PROTECTIVE COVERS FOR STANDARD THREADS 106

JUP PROTECTIVE COVERS FOR SORIEAU® JUPITER® CONNECTORS 108

Left Blank Intentionally


SERIES3233

TOPFLITE PROTECTIVE COVERTF32 & TF33MIL-DTL-38999 SERIES III

TF32 - FOR PLUGS TF33 - FOR RECEPTACLES

Z Thread

A Max

B Max

Z Thread

PROTECTIVE COVERS - PART NUMBER BREAKDOWN / HOW TO ORDER

TF 32- 09 W- 55 S- 02

EYELET OR RING SIZE (SEE TABLE III OR IV)

ACCESSORY (SEE TABLE II)

MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER

INTERFACE32 – MIL-DTL-38999 SERIES III (FOR PLUGS)33 – MIL-DTL-38999 SERIES III (FOR RECEPTACLES)

LANYARD LENGTH11/2 INCH INCREMENTS (EX. 35 IS 3.5 INCHES) (OMIT FOR STANDARD)

(SEE SECTION B FOR ADDITIONAL

MATERIAL/FINISHES)

TABLE I—PROTECTIVE COVER DIMENSIONS

SHELL SIZE ZTHREAD

AMAX

BMAX

09 (A) .6250-0.1P-0.3L-TS .906 (23.0) .906 (23.0)

11 (B) .7500-0.1P-0.3L-TS 1.024 (26.0) 1.102 (28.0)

13 (C) .8750-0.1P-0.3L-TS 1.220 (31.0) 1.220 (31.0)

15 (D) 1.0000-0.1P-0.3L-TS 1.300 (33.0) 1.260 (32.0)

17 (E) 1.1875-0.1P-0.3L-TS 1.457 (37.0) 1.457 (37.0)

19 (F) 1.2500-0.1P-0.3L-TS 1.575 (40.0) 1.535 (39.0)

21 (G) 1.3750-0.1P-0.3L-TS 1.732 (44.0) 1.654 (42.0)

23 (H) 1.5000-0.1P-0.3L-TS 1.811 (46.0) 1.772 (45.0)

25 (J) 1.6250-0.1P-0.3L-TS 1.969 (50.0) 1.929 (49.0)


SERIES3233

LANYARDS, RINGS & EYELETSACCESSORY SPECIFICATIONS

LANYARDS

#8 STAINLESS STEEL SASH CHAIN STAINLESS STEEL WIRE ROPE WITH CHOICE OF JACKET MATERIAL

STAINLESS STEEL BEAD CHAIN NYLON ROPE, BLACK

A DIA

B DIA

SOLID RING

EYELET

DISCLAIMERALL INFORMATION IN THIS CATALOG IS BELIEVED TO BE RELIABLE. READERS SHOULD INDEPENDENTLY EVALUATE EACH PRODUCT TO CONFIRM SUITABILITY WITH HIS/HER SPECIFIC APPLICATION. TOPFLITE COMPONENTS MAKESNO WARRANTIES AS TO THE ACCURACY OR COMPLETENESS OF THE INFORMATION AND DISCLAIM ANY LIABILITY REGARDING ITS USE. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. TOPFLITE COMPONENTSPROCESSES OR MATERIALS THAT DO NOT AFFECT COMPLIANCE WITH ANY APPLICABLE SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

TABLE II - LANYARD OPTIONS

ORDERING CODE DESCRIPTION

X NO ACCESSORY

R STAINLESS STEEL WIRE ROPE, PVC JACKET

B STAINLESS STEEL BEAD CHAIN

S STAINLESS STEEL SASH CHAIN

G NYLON ROPE, BLACK

Y STAINLESS STEEL WIRE ROPE, NYLON JACKET

T STAINLESS STEEL WIRE ROPE, TEFLON JACKET

TABLE IIIEYELET SPECIFICATIONS

DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)

TABLE IVSOLID RING SPECIFICATIONS

DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES TOPFLITE PROTECTIVE COVERTF42 & TF43MIL-DTL-5015

4243


Z Thread

A Max

B Max

Z Thread


TF 42- 10 W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZEd K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER

INTERFACE42 - MIL-DTL-5015 (FOR PLUGS)43 - MIL-DTL-5015 (FOR RECEPTACLES)

LENGTH1/2 INCH INCREMENTS (EX. 35 IS 3.5 INCHES) (OMIT FOR STANDARD)


MATERIAL/FINISHES)


SHELL SIZE ZTHREAD

AMAX

BMAX

08 1/2 - 28 UNEF .562 (14.3) .688 (17.5)

10 5/8 - 24 UNEF .687 (17.4) .815 (20.7)

12 3/4 - 20 UNEF .812 (20.6) 1.000 (25.4)

14 7/8 - 20 UNEF .937 (23.8) 1.125 (28.6)

16 1 - 20 UNEF 1.062 (27.0) 1.188 (30.2)

18 1 1/8 - 18 UNEF 1.187 (30.1) 1.344 (34.1)

20 1 1/4 - 18 UNEF 1.312 (33.3) 1.469 (37.3)

22 1 3/8 - 18 UNEF 1.437 (36.5) 1.594 (40.5)

24 1 1/2 - 18 UNEF 1.562 (39.7) 1.719 (43.7)

28 1 3/4 - 18 UNS 1.812 (46.0) 1.969 (50.0)

32 2 - 18 UNS 2.062 (52.4) 2.219 (56.4)

36 2 1/4 - 16 UN 2.312 (58.7) 2.469 (62.7)

40 2 1/2 - 16 UN 2.562 (65.1) 2.719 (69.1)

44 2 3/4 - 16 UN 2.812 (71.4) 2.969 (75.4)

48 3 - 16 UN 3.062 (77.8) 3.188 (81.0)


SERIES4243


LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES8081

TOPFLITE PROTECTIVE COVERTF80 & TF81MIL-DTL-26482


A Max

B Max


TF 80- 10 W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUMD BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER

INTERFACE80 - MIL-DTL-26482 (FOR PLUGS)81 - MIL-DTL-26482 (FOR RECEPTACLES)



MATERIAL/FINISHES)


SHELL SIZEA

MAXB

MAX

08 .719 (18.3) .734 (18.6)

10 .844 (21.4) .859 (21.8)

12 1.000 (25.4) 1.000 (25.4)

14 1.125 (28.6) 1.125 (28.6)

16 1.250 (31.8) 1.250 (31.8)

18 1.375 (34.9) 1.375 (34.9)

20 1.500 (38.1) 1.500 (38.1)

22 1.625 (41.3) 1.625 (41.3)

24 1.750 (44.5) 1.750 (44.5)


SERIESLANYARDS, RINGS & EYELETSACCESSORY SPECIFICATIONS 80

81

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES123124

TOPFLITE PROTECTIVE COVERTF123 & TF124VG95234 REVERSE BAYONET


A Max

B Max

C Max

D Max


TF 123- 10SL W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER

INTERFACE123 - VG95234 (FOR PLUGS)124 - VG95234 (FOR RECEPTACLES)



MATERIAL/FINISHES)


SHELL SIZE AMAX

BMAX

CMAX

DMAX

10SL 0.827 (21.00) 0.925 (23.50) 1.142 (29.00) 0.787 (20.00)

12S 0.945 (24.00) 1.063 (27.00) 1.142 (29.00) 0.787 (20.00)

14S 1.083 (27.50) 1.201 (30.50) 1.142 (29.00) 0.787 (20.00)

16S 1.181 (30.00) 1.299 (33.00) 1.142 (29.00) 0.787 (20.00)

16 1.181 (30.00) 1.299 (33.00) 1.457 (37.00) 0.984 (25.00)

18 1.319 (33.50) 1.476 (37.50) 1.457 (37.00) 0.984 (25.00)

20 1.457 (37.00) 1.614 (41.00) 1.457 (37.00) 0.984 (25.00)

22 1.575 (40.00) 1.732 (44.00) 1.457 (37.00) 0.984 (25.00)

24 1.713 (43.50) 1.870 (47.50) 1.457 (37.00) 0.984 (25.00)

28 1.949 (49.50) 2.146 (54.50) 1.457 (37.00) 0.984 (25.00)

32 2.205 (56.00) 2.402 (61.00) 1.457 (37.00) 0.984 (25.00)

36 2.461 (62.50) 2.657 (67.50) 1.457 (37.00) 0.984 (25.00)


SERIES123124


LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES451452

TOPFLITE PROTECTIVE COVERTF451 & TF452MIL-DTL-38999 SERIES IV


A Max

B Max C

Max


TF 451- 11 W- 55 S- 02



MATERIAL & FINISHW - ALUMINU W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER


INTERFACE451 - MIL-DTL-38999 SERIES IV (FOR PLUGS)452 - MIL-DTL-38999 SERIES IV (FOR RECEPTACLES)


MATERIAL/FINISHES)


SHELL SIZE A B C

11 (B) .509 (12.9) 1.180 (30.0) .875 (22.2)

13 (C) .634 (16.1) 1.320 (33.5) 1.000 (25.4)

15 (D) .759 (19.3) 1.440 (36.6) 1.125 (28.6)

17 (E) .885 (22.5) 1.560 (39.6) 1.250 (31.8)

19 (F) 1.009 (25.6) 1.680 (42.7) 1.375 (34.9)

21 (G) 1.134 (28.8) 1.820 (46.2) 1.500 (38.1)

23 (H) 1.259 (32.0) 1.940 (49.3) 1.625 (41.3)

25 (J) 1.384 (35.2) 2.060 (52.3) 1.750 (44.5)



452

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES501502

TOPFLITE PROTECTIVE COVERTF501 & TF502MIL-DTL-38999 SERIES I


A Max

B Max


TF 501- 11 W- 55 S- 02



MATERIAL & FINISHW - ALUMINU W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZE

SHELL SIZE

BASIC PART NUMBER

INTERFACE501 - MIL-DTL-38999 SERIES I (FOR PLUGS)502 - MIL-DTL-38999 SERIES I (FOR RECEPTACLES)



MATERIAL/FINISHES)


SHELL SIZEA

MAXB

MAX

9 .820 (20.8) .844 (21.4)

11 .940 (23.9) .968 (24.6)

13 1.070 (27.2) 1.125 (28.6)

15 1.190 (30.2) 1.250 (31.8)

17 1.320 (33.5) 1.406 (35.7)

19 1.440 (36.6) 1.500 (38.1)

21 1.570 (39.9) 1.625 (41.3)

23 1.690 (42.9) 1.750 (44.5)

25 1.820 (46.2) 1.875 (47.6)



502

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES510511

TOPFLITE PROTECTIVE COVERTF510 & TF511MIL-DTL-38999 SERIES II


A Max

B Max


TF 510- 11 W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/O ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER

INTERFACE510 - MIL-DTL-38999 SERIES II (FOR PLUGS)511 - MIL-DTL-38999 SERIES II (FOR RECEPTACLES)


MATERIAL/FINISHES)



SHELL SIZEA

MAXB

MAX

8 .720 (18.3) .719 (18.3)

10 .850 (21.6) .812 (20.6)

12 1.000 (25.4) 1.000 (25.4)

14 1.130 (28.7) 1.125 (28.6)

16 1.250 (31.8) 1.250 (31.8)

18 1.380 (35.1) 1.375 (34.9)

20 1.500 (38.1) 1.500 (38.1)

22 1.630 (41.4) 1.625 (41.3)

24 1.750 (44.5) 1.750 (44.5)



511

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES591601

TOPFLITE PROTECTIVE COVERTF591 & TF601MIL-DTL-83723 SERIES III THREADED


Z Thread

A Max

B Max

Z Thread


TF 591- 08 W- 55 S- 02

MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZED

SHELL SIZE

BASIC PART NUMBER



INTERFACE591 - MIL-DTL-83723 SERIES III (FOR PLUGS)601 - MIL-DTL-83723 SERIES III (FOR RECEPTACLES)


MATERIAL/FINISHES)



SHELL SIZE ZMAX

AMAX

BMAX

08 9/16 - 24 UNEF .776 (19.7) .776 (19.7)

10 11/16 - 24 UNEF .906 (23.0) .906 (23.0)

12 7/8 - 20 UNEF 1.078 (27.4) 1.078 (27.4)

14 15/16 - 20 UNEF 1.141 (29.0) 1.141 (29.0)

16 1 1/16 - 18 UNEF 1.266 (32.2) 1.266 (32.2)

18 1 3/16 - 18 UNEF 1.375 (34.9) 1.375 (34.9)

20 1 5/16 - 18 UNEF 1.510 (38.4) 1.510 (38.4)

22 1 7/16 - 18 UNEF 1.625 (41.3) 1.625 (41.3)

24 1 9/16 - 18 UNEF 1.760 (44.7) 1.760 (44.7)



601

LANYARDS



A DIA

B DIA

SOLID RING

EYELET



X NO ACCESSORY




G NYLON ROPE, BLACK





DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES592602

TOPFLITE PROTECTIVE COVERTF592 & TF602MIL-DTL-83723 SERIES III BAYONET


A Max

B Max


TF 592- 08 W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZE

SHELL SIZE

BASIC PART NUMBER

INTERFACE592 - MIL-DTL-83723 SERIES III (FOR PLUGS)602 - MIL-DTL-83723 SERIES III (FOR RECEPTACLES)


MATERIAL/FINISHES)



SHELL SIZEA

MAXB

MAX

08 .776 (19.7) .776 (19.7)

10 .906 (23.0) .906 (23.0)

12 1.078 (27.4) 1.078 (27.4)

14 1.141 (29.0) 1.141 (29.0)

16 1.266 (32.2) 1.266 (32.2)

18 1.375 (34.9) 1.375 (34.9)

20 1.510 (38.4) 1.510 (38.4)

22 1.625 (41.3) 1.625 (41.3)

24 1.760 (44.7) 1.760 (44.7)



602

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES TOPFLITE PROTECTIVE COVERTFM11 & TFM12M11

M12


TFM 11- 10 W- 55 S- 02




SHELL SIZE

BASIC PART NUMBER

INTERFACE11 - INTERNAL THREAD STYLE12 - EXTERNAL THREAD STYLE


MATERIAL/FINISHES)

LENGTH1/2 INCH INCREMENTS (EX. 35 IS 3.5 INCHES)

TFM12 – EXTERNAL THREAD TFM11 – INTERNAL THREAD

TABLE 1 – PROTECTIVE COVER DIMENSIONS

SIZE A MAX Z THREAD

01 0.250 M4X0.7

02 0.250 M5X0.8

03 0.250 M6X1.0

04 0.250 M6X0.75

05 0.250 M7X1.0

06 0.375 M8X1.25

07 0.375 M8X1.0

08 0.375 M10X1.5

09 0.375 M10X1.25

10 0.375 M10X1.0

11 0.375 M12X1.75

12 0.375 M12X1.5


SIZE A MAX Z THREAD

13 0.375 M12X1.25

14 0.500 M14X2.0

15 0.500 M16X2.0

16 0.500 M16X1.5

17 0.500 M18X2.5

18 0.500 M20X2.5

19 0.500 M20X1.5

20 0.650 M22X2.5

21 0.650 M24X3.0

22 0.650 M27X3.0

23 0.650 M30X3.5

AA

Z Thread

Z Thread


SERIESLANYARDS, RINGS & EYELETSACCESSORY SPECIFICATIONS M11

M12

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES TOPFLITE PROTECTIVE COVERS21 & S22S21

S22


TFS 21- 10 W- 55 S- 02




SHELL SIZE

BASIC PART NUMBER

INTERFACE21 - INTERNAL THREAD STYLE22 - EXTERNAL THREAD STYLE


MATERIAL/FINISHES)


TFS22 – EXTERNAL THREAD TFS21 – INTERNAL THREAD


SIZE A MAX Z THREAD

01 0.250 6-32

02 0.250 8-32

03 0.250 10-24

04 0.250 10-32

05 0.250 12-24

06 0.375 ¼-20

07 0.375 ¼-28

08 0.375 5/16-18

09 0.375 5/16-24

10 0.375 3/8-16

11 0.375 3/8-24


SIZE A MAX Z THREAD

12 0.375 7/16-14

13 0.375 7/16-20

14 0.500 ½-13

15 0.500 ½-20

16 0.500 9/16-12

17 0.500 9/16-18

18 0.500 5/8-11

19 0.500 5/8-18

20 0.650 ¾-10

21 0.650 ¾-16

22 0.650 7/8-9

AA

Z Thread

Z Thread


SIZE A MAX Z THREAD

23 0.650 7/8-14

24 0.650 1-8

25 0.650 1-12

26 0.650 1-14

27 0.650 1-1/8-7

28 0.650 1-1/8-12

29 0.750 1-1/4-7

30 0.750 1-1/4-12

31 0.750 1-3/8-6

32 0.750 1-1/2-6

33 0.750 1-1/2-12


SERIESLANYARDS, RINGS & EYELETSACCESSORY SPECIFICATIONS S21

S22

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)


SERIES TOPFLITE PROTECTIVE COVERJUPJUP


TF-JUP -08 P W- 55 S- 02



MATERIAL & FINISHW - ALUMINUM W/ O.D. CADMIUM F - ALUMINUM W/ ELECTROLESS NICKEL G - ALUMINUM HARD ANODIZED K - STAINLESS STEEL PASSIVATED A - ALUMINUM BLACK ANODIZE (OMIT FOR BRASS W/ELECTROLESS NICKEL PLATE)

BASIC PART NUMBER

P - PLUG CAP EXTERNAL THREADR - RECEPTACLE CAP INTERNAL THREAD


MATERIAL/FINISHES)


SHELL SIZE


SHELL SIZE A MAX B ∅ C MAX THREAD

08 1.180 0.800 1.062 M17X1.0

10 1.500 1.000 1.250 M21X1.0

14 1.500 1.300 1.300 M29X1.0

20 2.000 1.750 1.850 M41X1.0

A C

BB

R - RECEPTACLE CAP P - PLUG CAP


SERIESLANYARDS, RINGS & EYELETSACCESSORY SPECIFICATIONS JUP

LANYARDS



A DIA

B DIA

SOLID RING

EYELET




X NO ACCESSORY




G NYLON ROPE, BLACK




DASHNUMBER

ADIA

00 NO EYELET

01 0.140 (3.6)

02 0.167 (4.2)

03 0.197 (5.0)

04 0.125 (3.2)

05 0.156 (4.0)

06 0.182 (4.6)

07 0.191 (4.9)

08 0.218 (5.5)


DASHNUMBER

BDIA

20 .512 (13.0)

21 .583 (14.8)

22 .709 (18.0)

23 .787 (20.0)

24 .906 (23.0)

25 1.024 (26.0)

26 1.178 (30.0)

27 1.266 (32.2)

28 1.428 (36.3)

29 1.535 (39.0)

30 1.678 (42.6)

31 1.760 (44.7)

32 1.890 (48.0)

33 2.140 (54.4)

34 2.406 (61.1)

35 2.656 (67.5)

protective covers/caps - topflite components

Documents