protective equipment. sports equipment selection, fitting and maintenance of protective equipment...
TRANSCRIPT
PROTECTIVE EQUIPMENT
Sports Equipment
Selection, fitting and maintenance of protective equipment are critical in injury prevention
Athletic trainers and coaches must have knowledge of protective equipment available for different sports and proper fitting procedures
Protection is critical in contact and collision sports
Safety Standards for Equipment & Facilities
Concerns relative to materials, durability, establishment of standards, manufacturing, testing methods, and requirements for its use
Must be in place relative to maintenance Concern should be protective ability; not
appearance of equipment A number of groups and agencies are
involved in standardizing sports equipment and facilities
Equipment Reconditioning & Recertification
NOCSAE (National Operating Committee on Standards for Athletic Equipment) Has established test standards in order to
reduce head injuries Set minimum safety requirements for helmets
and masks for football, baseball/softball and lacrosse
Accepted standards for various regulatory bodies in sports
Type of helmet, amount of use/intensity will determine condition of help over a period of time
Equipment Reconditioning & Recertification
NOCSAE label does not warranty helmets Indicates helmet met requirements when
manufactured or reconditioned
NOCSAE recommends reconditioning and recertification of equipment Consumer should use discretion based on
use
Legal Concerns
Increasing amount of litigation regarding equipment Must foresee all uses and misuses and warn
user against potential risks inherent in equipment misuse
If equipment results in injury due to defect or inadequacy for intended use manufacturer is liable.
If equipment is modified – modifier becomes liable
Off the Shelf vs. Custom Protective Equipment
Off the shelf equipment Pre-made and
packaged Can be used
immediately Neoprene sleeves,
inserts, ankle braces May pose problem
relative to sizing
Off the Shelf vs. Custom Protective Equipment
Customized equipment
Specifically sized and designed for protective & supportive needs
Head Protection
Direct Collision sports require head protection due to impacts, forces, velocities and implements
Football Helmets NOCSAE developed standards for football
helmet certification Must be protective against concussive force While helmets must be certified, they may
not always be fail-safe Athletes and parents must be aware of
inherent risks
Warning label
Warning: Do not strike an opponent with any part of this helmet or face mask. This is a violation of football rules and may cause you to suffer severe brain or neck injury, including paralysis or death. Severe brain or neck injury may also occur accidentally while playing football. NO HELMET CAN PREVENT ALL SUCH INJURIES. USE THIS HELMET AT YOUR OWN RISK.
Revolution IQ hits
Revolution
Revolution IQ Quick Release
Head Protection
Each helmet must have visible exterior warning label. Label indicates that helmet should not be used
to strike an opponent due to risk of injury. Also indicates risk of injury accidentally and that
athlete plays at own risk while using helmet. Athlete must be aware of risks and what
label indicates. Athlete reads and signs statement regarding
warning label. There are a number of helmet
manufacturers, and even more have closed due to lawsuits and liability cases.
Helmet Fitting
When fitting, head/hair should be wet to simulate sweat.
Follow manufacturer’s directions. Must routinely check fit.
Snug fit. With change in altitude, bladder helmets must
be rechecked. Chin straps. Jaw pads are essential (prevent lateral rocking).
Certification is of no avail if helmet is not fitted and maintained.
Ice Hockey Helmets
Must withstand high velocity impacts (stick or puck) and high mass low velocity impacts.
Helmet will disperse force over large area and decelerate forces that would act on head (energy absorption liner).
Helmets must be approved by Canadian Standards Association (CSA).
Baseball/Softball Batting Helmets Must withstand high velocity impacts. Research has indicated that helmet does
little to dissipate energy of ball. Possible solution would be to add
additional external padding. Helmet must still carry NOCSAE stamp
(similar to football label).
Cycling Helmets
Designed to protect the head during one single impact.
Many states require use of cycling helmets, especially in adolescents.
Face Protection
Face Guard Has reduced the number of facial
injuries. Number of concussions has increased
because head is most often used in initial contact.
There are a variety of protective options depending on sport and position.
Proper mounting of the mask must occur with no additional attachments that would invalidate the manufacturer’s warranty.
All mountings must be flush to the helmet.
Face Masks
Face Protection
In high school hockey, face masks are required (with white plastic coating) that meet Hockey Equipment Certifications Council and American Society for Testing Materials.
Opening can not allow passage of sticks or pucks.
Additional polycarbonate face shields are also available.
The use of throat protectors is also mandated at some levels.
Throat Protection
Laryngotracheal injuries, while uncommon can be fatal.
Baseball catchers, lacrosse goalies and ice hockey goalies are most at risk.
Should be mandatory in these sports
Mouth guards
Most dental injuries can be prevented with appropriate customized intraoral mouth guards.
Protect teeth, minimize lip lacerations, absorb shock of chin blows, and prevent concussions.
Should fit comfortably, not impede speech or breathing.
Should extend back as far as last molar. Do not cut down mouth guard as it voids
warranty for dental protection and could become dislodged and disrupt breathing.
Mouth guards
Three types Stock Commercial (formed following submersion in
water) Custom (fabricated from dental mold)
Mandated use in high school and collegiate levels.
Ear Guards
Ear Guards Most sports do not use. Wrestling, water polo and boxing utilize
to prevent ear irritation and ultimate deformity of ears.
Eye Protection Devices
Highest percentage of eye injuries are sports related.
Generally blunt trauma. Glasses
May slip on sweat, become bent, fog, detract from peripheral vision or be difficult to wear with headgear.
Properly fitting glasses can provide adequate protection.
May have polarizing/tinting ability.
Eye Protection Devices
Contact Lenses Become part of the eye and move with it. Peripheral vision, astigmatisms and
corneal waviness is limited. Will not fog and can be tinted. Disadvantages include cost, corneal
irritation, possibility of coming dislodged.
Eye Protection Devices
Eye and Glasses Guards Necessary in sports with fast moving
projectiles. Athletes not wearing glasses should
wear closed eye guards to protect orbital cavity.
While eye guards afford great protection, they can limit vision.
Neck Protection
Neck Protection Serve primarily as a reminder to athlete
to be cautious rather than providing definitive restrictions.
Trunk and Thorax Protection
Essential in many sports. Must protect regions that are
exposed to the impact of forces. External genitalia, bony protuberances,
shoulders, ribs, and spine
Trunk and Thorax Protection
Football Shoulder Pads Rules of fitting
Width of shoulders must be measured. Inside of pad should cover tip of shoulder in
line with lateral aspect of shoulder. Epaulets and cups must cover deltoid and
allow motion. Neck opening must allow athlete to raise arms
over head w/out pads sliding forward and back. With split clavicle pads, channel for top of
shoulder must be in proper position. Straps underneath arms should hold pads
firmly in-place, w/out soft tissue restriction.
Trunk and Thorax Protection
Sports Bras Most designed to minimize excessive
vertical and horizontal movements that occur with running and jumping.
To be effective, should hold breasts to chest, preventing stretching of Cooper’s ligament.
Rib Protection Thorax protectors and rib belts. Protect against external forces.
Protective Equipment
Hips and Buttocks Required in collision and high-velocity
sports. Boxing, snow skiers, equestrians, jockeys
and water skiers. Girdle and belt types.
Groin and Genitalia Sports involving high velocity projectiles. Require cup protection for male participants
Lower Extremity Protective Equipment Socks
Poorly fit socks can cause abnormal stress on the foot.
Should be clean, dry and w/out holes.
Shoe selection Number of options for multiple activities.
Shoe Selection
Guidelines for selection Toe Box: space for toes (½ to ¾ inch of
space from toes to front of shoe) Sole: provide shock absorption and
durable Spongy layer to absorb force. Midsole that cushions midfoot and toes. Hard rubber which contacts the ground.
Shoe Fitting
Last: form on which shoe is built Straight = flat arch or run on inside of foot
(pronator) Semi-curved = foot to fit normal arch Curved = more forefoot stability, high arch
(supinator) Heel Counter: prevents medial and lateral roll of foot. Shoe Uppers: top of shoe made with combination of
materials, designed for appropriate ventilation, drying and support.
Arch Support: durable but soft and supportive to foot. Price: due to impact on performance and injury
prevention, may be worth the extra investment.
Shoe Fitting
Shoe fitting Measure both feet, as there will be slight
differences. Fit at the end of day due to gradual increase in
volume due to weight bearing. Should be snug but allow ample movement of
foot and toes. Should break at widest part, coinciding with ball
of foot. Must also consider width of shank, non-yielding
nature of sole and function of arch support. Cleated and specialty shoes may present
problems with fitting. Playing surfaces and activities must be
considered.
Lower Extremity Protective Equipment Heel Cups
Used for a variety of conditions including plantar fasciitis, heel spurs, Achilles tendonitis & heel bursitis.
Used to help compress fat pad, providing more cushion during weight bearing.
Foot Orthotics Device for correcting biomechanical problems that
exist in foot that can cause injury. Plastic, thermoplastic, rubber, sorbethane, leather
support or ready-made products. Can also be customized by physician, podiatrist,
athletic trainer or physical therapist.
Lower Extremity Protective Equipment Ankle Supports
Can be used alone or with tape. Compared to tape, the device will not
loosen significantly with use. Shin and Lower Leg
Commercially marketed, hard molded shin guards are used in field hockey and soccer.
Lower Extremity Protective Equipment Thigh and Upper Leg
Necessary in collision sports. Pads slip into ready made uniform
pockets. Customized pads may need to be
held in place with tape and/or wraps.
Neoprene sleeves can also be used for support of injuries.
Knee Braces Used prophylactically to prevent
injuries to MCL. AOSSM has expressed concern
about their efficacy in reducing injuries.
Lower Extremity Protective Equipment Types of Braces
Rehabilitative Widely used following surgery. Allows controlled progressive
immobilization. Adjustable.
Functional Used during & following rehab to
provide functional support. Ready-made and customized.
Lower Extremity Protective Equipment
Neoprene (w/ medial and lateral support) Used by those that have sustained collateral
ligament injuries. Some are also used to provide support in
those that have patellofemoral conditions.
Elbow, Wrist and Hand Protection While the elbow is less commonly injured, it
is susceptible to instability, contusions, and muscle strain.
A variety of products are available to protect the elbow.
Wrist, hand and finger injuries are often trivialized but can be functionally disabling.
Susceptible to fracture, dislocation, ligament sprains & muscle strains.
Gloves and splints are available for protection and immobilization.