prototype cnc machining, turning & machine shop · machinery management inc. dba mri auctions...

PUBLIC WEBCAST AUCTION

Prototype CNC Machining, Turning & Machine Shop

AUCTION DATE & TIME

Wednesday August 9, 2017 at 11:00 AM PDT

LOCATION

FDM Engineering, Inc.

11015 Olinda Street

Sun Valley, CA 91352

INSPECTION

Wednesday, August 9, 2017 from 8:00 AM to 11:00 AM PDT

PAYMENT & REMOVAL

Full payment must be made by no later than

12:00 PM PDT Thursday, August 10, 2017.

Removal no later than Monday August 14, 2017

15% BUYERS PREMIUM will be added to all ONSITE purchases

18% BUYERS PREMIUM will be added to all ONLINE purchases

Sale Conducted By:

• Tel: 818.346.7985 • Fax: 818.346.7986 • 1650 Voyager Ave. Ste. A, Simi Valley, CA 93063 • www.MRIAuctions.com

Payment & Removal Information

ALL INVOICES MUST BE PAID IN FULL NO LATER THAN:

12:00 PM THURSDAY AUGUST 10, 2017

NO EXCEPTIONS!

Removals:

Removal Dates & Time: From Wednesday, August 9 (after the auction ends) through

Monday, August 14 2017, between 8:00 AM to 4:00 PM. No removal during the auction

sale. NO WEEKEND REMOVAL

Removal Contact: Frank Zepeda (213) 294-0172

Removal Address: 11015 Olinda Street Sun Valley, CA 91352

Payment:

Cash

Cashier’s Check payable to MRI Auctions

Company Check payable to MRI Auctions & accompanied by a Bank Letter of

Guarantee according to format provided

Wire Transfer (instructions will be provided)

Sales Tax:

State, county and local tax of 9.25% applies to all purchases

If you are a reseller in California, a copy of your SELLER’S PERMIT and a California

RESALE CERTIFICATE MUST be provided to waive sales tax.

If you are out of state you MUST SUBMIT A BILL OF LADING FROM YOUR

TRUCKING COMPANY in order to remove the sales tax.

15% BUYERS PREMIUM will be added to all ONSITE purchases

18% BUYERS PREMIUM will be added to all ONLINE purchases

**THIS CATALOG IS MEANT MERELY AS A GUIDE. THE

AUCTIONEERS DO NOT WARRANT THE ACCURACY,

GENUINENESS, AUTHENTICITY, DESCRIPTION, WEIGHT

OR COUNT OF MEASURE OF ANY OF THE

LOTS SPECIFIED HEREIN**

PROPER FORMAT OF A BANK LETTER OF GUARANTEE USED FOR

BUSINESS CHECKS

(Must be on Bank Letterhead)

Date: Today’s Date

Machinery Management Inc. DBA MRI Auctions

1650 Voyager Ave, Ste. A

Simi Valley, CA 93063

Re: FDM Engineering Auction

To Whom it May Concern,

Your Company Name holds a checking account with our bank, account number

your account number. Your bank name will GUARANTEE check number check

number used made payable to MRI Auctions, for any amount up to bank to specify

amount.

Signed,

Bank Officer Signature

Bank Officer Name

Bank Officer Telephone

TERMS & CONDITIONS OF SALE

1. Buyer is required to maintain a 25% deposit on all items purchased at the auction. This is a nonrefundable deposit and will be forfeited in the event that a Buyer fails to close. Payments are accepted in the form of CASH, CASHIER'S CHECK made payable to Machinery Resources International, WIRE TRANSFER, or BUSINESS CHECK accompanied by an APPROVED BANK LETTER OF GUARANTEE payable to Machinery Resources International ONLY. NO EXCEPTIONS. All bidding and invoicing will be in US Dollars ($); the above approved forms of payment must be made in US currency. ALL INVOICES MUST BE PAID WITHIN 24 HOURS OR THE DEPOSIT WILL BE FORFEITED TO AUCTIONEER. 2. NO DEPOSIT IS REQUIRED TO REGISTER AND TO PARTICIPATE IN THE AUCTION. 3. A premium of 15% ONSITE and 18% ONLINE of the bid price will be added to the price of each item purchased. The buyer's premium for each sale will be announced at the time of the auction. Taxes are calculated AFTER the buyer's premium. Note: Buyer's premium online generally differs from onsite. The Buyer's Premium percentage will be posted on the website or announced by the auctioneer. 4. ALL SALES ARE FINAL. NO EXCEPTIONS. The condition of the merchandise being offered varies. Buyer understands and agrees:(a) that any description or sample of the merchandise given or furnished by Auctioneer is solely for identification, and does not create any warranty, express or implied, that the merchandise actually conforms to such description or sample; (b) that all merchandise is purchased and accepted by Buyer "AS IS-WHERE IS," 'IN PLACE" and "WITH ALL FAULTS, KNOWN AND UNKNOWN.'' AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, QUANTITY, CONDITION, LOCATION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, FITNESS FOR A PARTICULAR PURPOSE OR OTHER SPECIFICATIONS. MANUFACTURERS WARRANTIES MAY BE IN EFFECT. NO SALE SHALL BE INVALIDATED AND AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT OR OTHERWISE. Descriptions have been prepared for guide purposes only and shall not be relied upon by Buyer for accuracy or completeness. By submitting a bid, Buyer/Bidder affirms it has inspected all items or has waived its right to do so prior to bidding Buyers shall be deemed to have relied entirely upon their own inspections and investigations. 5. Buyers will be charged all applicable taxes unless SATISFACTORY PROOF OF EXEMPTION is provided to Auctioneer prior to payment. lf satisfactory proof is not provided, Buyer will pay all applicable taxes to Auctioneer. No taxes will be refunded once the tax has been collected. Proof of exemption, subject to approval by Auctioneer, includes VALID RESELLER'S PERMITS, STATE ISSUED LETTERS OF EXEMPTION, BILLS OF LADING provided by shipper for OUT-OF-STATE SHIPMENTS only, and any other documents as governed by applicable local, state, and federal laws deemed acceptable at Auctioneer's sole discretion. Taxes are calculated AFTER the buyer's premium. 6. All articles will be sold to the highest bidder conforming to the bid process. Auctioneer reserves the right to sell articles by individual group lots and "En Bloc" as he deems appropriate. Auctioneer reserves the right to group, reduce, add to or delete lots. Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. in the event there is a dispute between two or more claims of entitlement as the successful bidder, Auctioneer reserves the right to re-auction the item in dispute. Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. Auctioneer shall be entitled to make changes in (the composition of) the lots or to withdraw them, up until the last moment before the sale, refuse bids without having to state the reasons, in which case the previous bidders shall be bound to their bids, and to correct himself. Auctioneer reserves the right to sell subject to reserve and to purchase for its own account or of others, whether by verbal or written proxy, all subject to prior sale. All sales shall be concluded on the fall of the hammer or as indicated by Auctioneer and no Buyer may thereafter revoke his bid. 7. Any announcements made on the day of the auction take precedence over catalogue or other previously announced or documented information, but do not alter in any way the basic terms and conditions of sale. Machinery Resources International reserves the right to correct any mistakes or typographical errors made by itself or on its behalf in any of its announcements or documents. 8. No checkout will be permitted during the auction sale. All invoices must be paid in full before merchandise will be released from the premises. Unless Auctioneer determines otherwise at its sole discretion, checkout will begin on the day following the auction sale. Quantities must be checked before removal of purchases. No allowances will be made for claims or shortages once items are removed from the Auction premises. Unless Auctioneer determines otherwise at its sole discretion, no item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale. Where available, documents of transfer, including motor vehicle ownership documents, will be provided within 7 days following the auction or as soon thereafter as such documents are available. Machinery Resources International makes no warranties that such documents will be available. Any available titles shall not pass to Buyer until full payment is received. 9. All property must be paid for and picked up in the time frames announced by Auctioneer at time of sale. lf not, the merchandise will be deemed abandoned and Buyer will lose any right, title or interest Buyer may have acquired and the merchandise shall revert and repossess to Auctioneer without further notice to Buyer and Buyer's deposit will be forfeited. No purchaser may assign, transfer, or dispose of his rights in any article purchased before he has paid the purchase price in full. No reselling will be allowed from the premises.

10. lf an applicable conditions are not complied with by Buyer, then, in addition to any other remedies available to Auctioneer, including and without limitation, the right to hold Buyer liable for the total purchase price, Auctioneer may, at its option, (a) cancel the sale, retaining all payments made by Buyer, including any deposit made, as liquidated damages and/or (b) resell the merchandise at public auction in which event Buyer will be liable for the cost of removing and reselling the abandoned merchandise, for any deficiency between Buyer's original purchase price and subsequent resale price, Auctioneer's commission, interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum of $2.00/sq.ft. per month) and all other expenses related to the disposal or reselling of the abandoned property. In addition, Auctioneer may retain any merchandise purchased at auction by a defaulting Buyer as collateral security for Buyer's obligations to Auctioneer. 11. Buyer is solely responsible to provide any personnel, equipment or material needed to pick up purchases and shall assume all responsibility for the removal of any item of property purchased at the sale and any and all risks associated with such removal including, without limitations, the responsibility for providing LICENSED AND BONDED professionals to ensure proper water, gas and/or power disconnection, disassembly, removal and loading, and full financial responsibility for any damage or liability to persons or property resulting from any negligent act or omission of Buyer or Buyer's employees, agents and/or representatives during pick-up and removal. 12. Buyer agrees that in the event purchased merchandise contains any environmental hazards, toxic waste or other type of hazardous material in any form whatsoever, Buyer shall provide evidence that Buyer or its representatives are licensed for such removal and shall comply with all applicable local, state and/or federal rules, laws and regulations. Auctioneer, its agents or representatives will not be responsible for its containment, storage or removal. 13. Persons in attendance during inspection, sale or removal of merchandise assume all risks of damage or loss to persons, property, or merchandise and shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by Auctioneer, and local, state and federal regulations. Auctioneer, its agents, its employees and representatives shall not be liable by reason of any defect in or about the condition of the premises on which the auction is held. Buyer specifically releases Auctioneer, its agents and representatives from all liability thereof. 14. All risk loss shall pass to Buyer at the time of payment. lf Auctioneer is unable to deliver an article sold to Buyer due to fire, theft, or any other reasons whatsoever, Auctioneer shall reimburse Buyer for all monies paid to Auctioneer in respect to the article and Auctioneer shall have no further liability to the purchaser arising from or relating to such loss, including without limitation any damages for loss of profits. 15. In no event shall Auctioneer's liability to Buyer exceed the purchase price actually paid, A Buyer's claim shall be limited to the amount paid for the merchandise, and shall not extend to any obligation; risk; liability; right; claim; remedy for loss of use, revenue or profit; liability of Buyer to any third party; personal injury; or any other direct, indirect, incidental or consequential damages. Auctioneer is acting as an agent only and is not responsible for the acts of its principles. 16. Buyer agrees to indemnify, defend and hold harmless Auctioneer and its agents and representatives, from any and all demands, claims, losses, damages and liabilities (including attorneys' fees) asserted against, resulting to or imposed upon Auctioneer resulting from the negligence of Buyer or his/her employees, agents and representatives, while in, at or about the auction premises during inspection, sale or removal of merchandise. 17. Machinery Resources International shall have the right to make image and audio video recordings of the auction, to use said recordings at its own discretion, and if deemed appropriate to make this public. Participants give their permission by participating in the auction. 18. The bidder's paddle is nontransferable. All bids made by the holder of the paddle will be Buyer's responsibility. A successful bid at auction constitutes a legally binding contract of sale. Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending the auction and may revoke such privilege of bidding or attending the auction AT ANY TIME. 19. This sales transaction shall be governed by and construed in accordance with the local laws of the State of California, USA. lf any provision of these Terms and Conditions shall be held invalid, illegal, unenforceable or inoperative, the balance of Terms and Conditions shall remain in full force and affect as if such provisions had not been included. These Terms and Conditions with any amendments or modifications expressly made by Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of articles at this auction. There are no representations, warranties, terms, conditions, undertakings or collateral agreements except as herein provided. 20. All Buyers acknowledge and accept by their bid at auction the Terms and Conditions of Sale printed on this registration card/bidder paddle.

ALL SALES ARE FINAL! NO REFUNDS OR EXCHANGES!

AUCTION CATALOG August 9, 2017

LOT# QTY DESCRIPTION

1 1 CUTTING TORCH

2 1 ENCO HORIZONTIAL BAND SAW, MODEL 136-2616, S/N 901625

3 1 CNC BAR FEED

4 1 PART WASHER

5 1 BALDOR BUFFER/GRINDER CAT 662R, S/N W381

6 1 PATTON INDUSTRIAL FAN

7 1 27" INDUSTRIAL FAN

8 1 PORTABLE STORAGE TOOL BOX

9 1 KENNEDY TOOL BOX

10 1 AMERICAN EAGLE AIR COMPRESSOR, MODEL B-23, S/N 239701, 5 HP MOTOR

11 1 5 DRAWER TOOL STORAGE METAL CABINET

11A 1 CINCINNATI HORIZONTIAL #2 PRODUCTION MILL

12 1 CUTTERMASTER END MILL & TOOL GRINDER, MODEL HDT-30, 110 VOLT, PHASE I, 3450

RPM, S/N 2492-B

13 1 2-DOOR METAL CABINET

14 1 EMERSON BELT SANDER CONBINATION

15 1 DELTA VERTICAL BAND SAW, CAT # 28-303, S/N 94152644

16 1 CARBIDE GRINDER

17 1 METAL DESK

18 1 BALDOR DOUBLE END CARBIDE GRINDER, CAT # 500, HP 1/2, PHASE I, 3,600 RPM

19 1 AIR FAN

20 1 STORAGE MATERIAL HEAVY DUTY RACK, NO CONTENT

21 1 STORAGE MATERIAL HEAVY DUTY RACK, NO CONTENT

22 1 USABLE STEEL MATERIAL ON 2 RACK TO INCLUDE STEEL ROUNF/FLAT ALUMINUM

ROUND/FLAT ALUMINUM PLATES

23 1 (3) METAL STEEL SHELVING, NO CONTENTS

24 1 YUASA 5C COLLET INDEX, S/N 550

25 1 RICH MILL 5C COLLET INDEX

26 1 8" 3 JAW LATHE CHUCK

27 1 6" KURT VISE MODEL 3600V, S/N 038040

28 1 6" KURT VISE

29 1 6" KURT VISE

30 1 7" 3 JAW BUCK CHUCK

31 1 BTC 5" 3 JAW CHUCK

32 1 KDK TOOL POST & HOLDER

33 1 ALBRECHT 0-1/4 KEYLESS PRECISION DRILL CHUCK

34 1 CAT 40 HOLDER WITH 0-1/4" ALBRECHT KEYLESS DRILL CHUCK

35 1 CAT 40 CNC HOLDER WITH 0-3/8" ALBRECHT KEYLESS DRILL CHUCK

36 1 CAT 40 CNC HOLDER WITH 1/32" - 1/2" ALBRECHT KEYLESS DRILL CHUCK

37 1 CAT 40 CNC HOLDER WITH 1/32"-1/2" ALBRECHT KEYLESS DRILL CHUCK



40 1 CAT 40 CNC HOLDER WITH KYUSHKO6H S-50 SUPER PRECISION BORING HEAD

41 1 CRITIRION BORING HEAD 5/8 SHANK DBL-202

42 1 (2) CRITIRION BORING HEAD 5/8 SHANK DBL-202

43 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD MOD-3

Page 1 of 7



44 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD

45 1 CAT 40 CNC HOLDER WITH CRITIRION BORING HEAD DBL-202

46 1 (5) ASSORTED CAT 40 CNC HOLDER






51A 1 USABLE BRASS MATERIAL ON TOP OF RACK

52 1 (4) CAT 40 CNC HOLDER

53 1 (3) CAT 40 COLLET TYPE CNC HOLDER ASSORTED



56 1 (3) CAT 40 WITH TAPPIN COLLET HOLDER ATTACHMENT


58 1 8" 4 JAW LATHE CHUCK

59 1 5C COLLET HOLDER FIXTURE

60 1 4" MILL/DRILL VISE

61 1 2" SUPER PRECISION TOOL MAKER VISE

62 1 3" JAW LATHE CHUCK MOUNTER ON ALUMINUM PLATE

63 1 BTC 5" 3 JAW BUCK CHUCK

64 1 (2) ALUMINUM MILL STOP

65 1 5C COLLET CLOSER

66 1 FIX CUTTER TOOLS

67 1 CAT 40 CNC HOLDER WITH PRECISION BORING HEAD

68 1 ASSORTED SPRING COLLET

69 1 EXTENTION COLLET ADAPTER

70 1 (16) 5C COLLET

71 1 ASSORTED TOOLING HOLDER FOR HARDINGE LATHE

72 1 TOOLS ON WALL

73 1 ASSORTED LATHE STEEL JAW

74 1 OPTI VISER LAMP

75 1 ALUMINUM MATERIAL ON RACK

76 1 SHIPPING SUPPLIES WITH (2) METAL SHELVES

77 1 ALUMINUM SOFT JAW

78 1 RACK WITH COMPUTER, MONITOR, AND PRINTER

78A 1 COMPUTER AND MONITORS

79 1 BROWN AND SHARPE 2L 6" X 18" SURFACE GRINDER, AUTOMATIC

80 1 DENISON MULTIPRESS PRESS MODEL R063M020, 6 TON CAPACITY, RAM DIAMETER 2",

THROAT 3", VOLT 220, PHASE 3, S/N 16304

81 1 TREE VERTICAL MILL, MITUTOYODRO, 60-3300 RPM, 2 HP MOTOR, 220 VOLT, S/N 780026C-

14

82 1 HARDING HC CHUCKER LATHE, MODEL HC, 5 STATION TURRET, POWER FEED, 1.5 HP, 230

VOLT, 3 PHASE, S/N A934413

82A 1 5C COLLET SET

Page 2 of 7



83 1 HARDINGE PRECISION 2ND OPERATION LATHE, MODEL DSM59/DSM 59, 5C COLLET SET,

230 VOLT, 3 PHASE, S/N B1226061

83A 1 (30) ASSORTED 5C COLLET ROUND & HEXAGONAL

84 1 CLAUSING COLCHESTER 15" X 48" ENGINE LATHE, MITUTOYO DRO, INCH/METRIC

STEADY REST, FOLLOW REST, 3 JAW CHUCK, 4 JAW CHUCK, 25-2000 RPM, 7.5 HP MOTOR,

230 VOLT, PHASE 3, POWER FEED, BRAKE STOP, S/N 6/0015/13305

85 1 METAL WORK BENCH

85A 1 SHOP MAKE BORING BAR

86 1 BRIDGEPORT VERTICAL MILL, SERIES II, 2HP, NEWALL SAPPHIRE DRO INCH/METRIC,

AUTOMATIC POWER DRAW BAR, POWER FEED, CHROME WAYS, MITUTOYO DIGITIAL

STOP DEPTH GAGE, R 8 COLLET SET, ONE SHOT LUBE, TABLE SIZE 9 X 42, S/N 264843

87 1 6" KURT VISE

88 1 2-DRAWER STORAGE METAL CABINET

89 1 HITACHI SEIKI CNC VERTICAL MACINING CENTER MODEL VM 40-II, SEICOS CONTROL,

CRT RAPID OVERRIDE, SPINDLE OVERRIDE, 8000 RPM, 220 VOLTS, 3 PHASE, 18KVA, TABLE

SIZE 16" X 40", 20 ATC

90 1 HITACHI SEIKI CNC VERTICAL MACHINING CENTER, VA 5-SERIES, MODEL VA35 III,

SYSTEM 11M CONTROL, CRT, 220 VOLTS, 3 PHASE, 25 KVA CAPACITY, FEED OVERRIDE,

RATE OVERRIDE, S/N LS70-8

91 1 HAAS 5C ROTARY TABLE INDEXER, TAILSTOCK, BRUSHLESS, DIGITAL CONTROL, S/N

802792

92 1 LOT OF CARBIDE BORING BAR AND DRILL BUSHING

93 1 LOT OF COBOLT ROUGHER END MILL

94 1 LOT OF SPECIAL CNC CLAMPS

95 1 CAT 40 HOLDER SET UP TOOL

96 1 WORK BENCH

97 1 COMPUTER WITH SAMSUNG MONITOR AND KEYBOARD

98 1 CAT 40 METAL PORTABLE TOOL HOLDER RACK

99 1 VOID

100 1 KEARNEY AND TRECKER DIVIDING HEAD WITH TAILSTOCK 8" CHUCK

101 1 KEARNEY AND TRECKER UNIVERSAL MILL, MODEL K, POWER FEED 45-717 RPM, TABLE

SIZE 18" X 52"

102 1 KEARNEY AND TRECKER 16" DIAMETER, MANUAL ROTARY TABLE

103 1 KEARNEY AND TRECKER HEAVY DUTY 8' X 19" MILLING VISE

104 1 KEARNEY AND TRECKER HEAVY DUTY 8' X 19" MILLING VISE

105 1 ASSORTED TOOLING FOR KEARNEY AND TRECKER VERTICAL MILL

106 1 WASINO L-70 CNC GANG TYPE LATHE, FANUC 3T CONTROL, CRT, 2 AXIS, 3,000 RPM, 12.63”

TURNING DIAMETER, ZX TRAVELS: 10” X 18”, 5 HP, 220 VOLTS, COOLANT PUMP, 3 PHASE,

S/N 478

106A 1 TOOLING FOR WASINO L-70 CNC LATHE

106B 1 HOWA 5" CNC 3 JAW CHUCK FOR WASINO CNC LATHE

107 1 HITACHI SEIKI HITEC TURN CNC LATHE, MODEL HT-20, FANUC 11M CONTROL, CRT, 5” X

13” TRAVELS, 17" SWING, 8" PRECISION HYDRAULIC CHUCK, TAILSTOCK, 220 VOLTS, 3

PHASE, POWER CAPACITY 24 KVA, S/N 20831-SC

Page 3 of 7



107A 1 3 JAW CHUCK CNC LATHE CHUCK FOR HITACHI SEIKI

108 1 WORK BENCH AND BUSHING TOOL HOLDER

109 1 12" X 18" GRANITE SURFACE PLATE

110 1 HUOT TAP METAL CABINET WITH CONTENTS - ASSORTED HSSTAP

111 1 HUOT TAP METAL CABINET WITH CONTENTS - ASSORTED HSSTAP


113 1 HUOT METAL DRILL CABINET WITH CONTENT - NUMBER DRILL SIZES

114 1 HUOT METAL DRILL FRACTIONAL CABINET WITH CONTENT

115 1 HUOT METAL DRILL CABINET WITH CONTENT LETTER DRILL SIZE

116 1 HUOT METAL DRILL CABINET WITH CONTENT HSS REAMER

117 1 2 DOOR STORAGE TOOL CABINET

118 1 METAL WORK BENCH 30" X 48" X 3'

119 1 ASSORTED COBOLT TOOL BITS

120 1 CARBIDE INSERTS

121 1 CARBIDE INSERTS AND END MILL

122 1 FLY CUTTER TOOLS

123 1 HOLD DOWN CLAMPS



126 1 HAND TOOLS

127 1 HERTEL JOBBER DRILL SET

128 1 PARALIEL SET

129 1 PARALIEL SET

130 1 HARDINGE DRILL BUSHING

131 1 (3) DRILL CHUCK

132 1 PREMEL TOOL GRINDER

133 1 SPI LOCK 6" VISE

134 1 LOT OF ALLEN WRENCHES

135 1 LOT OF LATHE TOOL HOLDERS

135A 1 EMERGENCY 5C COLLET

136 1 JOBBEN DRILL SET

137 1 ASSORTED COBOLT TOOL BITS

138 1 3 JAW 4" BUCK CHUCH


140 1 GRANITE SURFACE PLATE 24" X 18"

141 1 ASSORTED HAND TAPS

142 1 ASSORTED CENTRER DRILL

143 1 ASSORTED STEEL 3 JAW CHUCK

144 1 SOCKET SET TOLL

145 1 SWIVEL BENCH VISE

146 1 ASSORTED CUTTING TOOLS

147 1 20' 4 JAW CHUCK LATHE

148 1 CNC INDEXABLE INSERT BORING BAR

149 1 CNC INDEXABLE INSERT BORING BAR SHANK

150 1 ASSORTED INDEXABLE INSERT END MILL CUTTER

151 1 CNC INDEXABLE INSERT END MILL CUTTER

Page 4 of 7



152 1 INDEXABLE INSERT CNC TOOL HOLDER 1" SHANK

153 1 INDEXABLE INSERT CNC TOOL HOLDER 1" SHANK

154 1 INDEXABLE INSERT GROOVING CNC TOOL HOLDER

155 1 INDEXABLE INSERT ASSORTER RIGHT AND LEFT HAND TOOL HOLDER 3/4" SHANK

156 1 CNC INDEXABLE INSERT PROFILE TOOL HOLDER

157 1 CARBIDE END MILLS

158 1 LONG SIZE COBOLT END MILL

159 1 ASSORTED HSS END MILL CUTTER

160 1 LOT OF INSPECSION ANGLE BLOCK

161 1 ASSORTED HSS END MILL CUTTER

162 1 ASSORTED ROUGHER END MILL CUTTER

163 1 HSS END MILL CUTTER

164 1 COUNTER SINK TOOLS

165 1 ASSORTED SAW BLADE CUTTER

166 1 ALLIEN 20 TON HYDRAULIC JACK

167 1 CLACK AND DECKER 3/8 ELECTRICAL DRILL

168 1 ASSORTED HEARDINGE TOOL HOLDER LOT

168A 1 DESK WITH CONTENT

169 1 PLASTIC PART BIN WITH WOODROOF CUTTER, HELICOIL TOOL, HARDWARE

170 1 PLASTIC PART BIN WITH DRILL BLANK SET SCREW HARDWARE

171 1 PLASTIC PART BIN WITH BOLT SCREW DOWEL PINS, SOCKET HEAD SCREW, ETC.

171A 1 CONTENT IN CABINET

172 1 PLASTIC BIN CABINET WITH HSS METRIC/INCHES TAPS, DRILL BIT

173 1 HELICOIL TOOL SET

174 1 HELICOIL TOOL SET

175 1 LOT OF HARDINGE SOFT 5C COLLET STEP COLLET

176 1 PLASTIC BIN CABINET WITH CARBIDE INSERT, ALLEN WRENCHES, DRILLS, THREAD DIES

177 1 PLASTIC BIN CABINET WITH LARGE HSS TAPS

178 1 SHARP MICROWAVE OVER, COFFEE MAKER

179 1 WOOD DESK

180 1 TIME CLOCK MASTER

181 1 CHICAGO WATER COOLER

182 1 RANGAIRE REFRIGERATOR

182A 1 VOID

183 1 PLASTIC HARDWARE BIN, HARDWARE & ELECTRICAL SUPPLIES

184 1 MITUTOYO TOOL MAKERS MICROSCOPE WITH DIGITAL RATE READ OUT, CODE # 176-904-

1A, S/N 80805

185 1 BAUSH AND LOMB STEREO MICROSCOPE

186 1 LINKS BRAND INSPECSION BLOCK SET

187 1 INSPECSION GAUGE BLOCK SET

188 1 VERMONT PIN GAGE .251/.500

189 1 VERMONT PIN GAGE .061/.0250

190 1 VERMONT PIN GAGE .251/.500, .61/.251

191 1 LUFKIN PLANER GAGE AND LEVEL

Page 5 of 7



192 1 INSPECSION SINE TABLE TABLE 7" X 6"

193 1 MITUTOYO 0"-12" DIAL HEIGHT GATE

194 1 CO-AX INDICATOR

195 1 MITUTOYO MASTER HEIGHT GAGE 0"-13"

196 1 MICRO TOUCH CAT 40 UMT-200 NIKKEN

197 1 MITUTOYO DIAL BORE GAGE

198 1 EATON 0"-1" OUTSIDE MICRO,ETER AND RING MASTER GAGE

199 1 BROWN AND SHARPE BEST TEST INDICATOR .0005"

200 1 MITUTOYO VERTICAL DIAL TEST INDICATOR .0005"

201 1 24" X 36" MICRO FLAT SURFACE PLATE

202 1 INSPECTION TOOLS

203 1 LOT OF MAGNETIC BASES

204 1 LOT OF INDICATOR HOLDER ACCESSORIES

205 1 DELTRONIC PIN GAGES

206 1 HARDINGE AND STARRETT DIAL INDICATOR

207 1 DIAL INDICATOR

208 1 INDICATOR STAND

209 1 INDICATOR CALIPER O-RING/BORE GAUGE

210 1 TOOL MAKER PRECISION VISE

211 1 CARBIDE END MILL

212 1 MACHINERY HAND BOOK

213 1 MICROMETER BASE STAND

214 1 2 DRAWER METAL CABINET

215 1 ROUGHER COBOLT END MILL

216 1 SHARS 1"-12" OUTSIDE MICROMETER SET

217 1 CABINET WITH PLUG GAUGES AND RING GAUGES

218 1 METAL CABINET WITH CONTENT

219 1 10" MICRO VU OPTICAL COMPARATOR, MODEL 400, 115 VOLTS, 3 AM, S/N 11911

220 1 MITUTOYO 2"-3" DIGITAL OUTSIDE MICROMETER .00005"

221 1 MITUTOYO 1"-2" DIGITAL OUTSIDE MICROMETER .00005"

222 1 MITUTOYO 0"-1" OUTSIDE MICROMETER .0001"

223 1 MITUTOYO 0"-1" OUTSIDE MICROMETER .0001"

224 1 INTERTEST INSIDE GAGUE .0005"

225 1 INTERTEST INSIDE GAGUE .0005"

226 1 MITUTOYO 3"-4" OUTSIDE MICROMETER

227 1 MITUTOYO 4"-5" OUTSIDE MICROMETER

228 1 MITUTOYO 1"-2" THREAD MICROMETER

229 1 MITUTOYO 0"-1" THREAD MIKE

230 1 MITUTOYO DIAL TEST INDICATOR .0005"

231 1 TESA 1"-2" OUTSIDE MIKE

232 1 MITUTOYO 0"-4" DEPTH MIKE

233 1 MITUTOYO 0"-1" PIN MICROMETER

234 1 MITUYOTO O.D. DISK MIC 0"-1"

235 1 EATOLON 1"-2" OUTSIDE MIC

236 1 MITUTOYO METRIC DIAL CALIPER

237 1 MITUTOYO 1-2 BLADE MIC

Page 6 of 7



238 1 SCHERR TUMICO 1-2 BLADE MIC

239 1 TESA 6" DIAL CALIPER

240 1 SPI INDICATOR WITH STAND

241 1 TECLOCK - 2" DIAL INDICATOR

242 1 MITUTOYO 1"-2" BLADE MIC

243 1 ANGLE PARALIEL

244 1 MITUTOYO 2"-3" O.D. MIC

245 1 SCHERR TUMICO, 0"-6" DEPTH MIC

246 1 EATALON 6" DIAL CALIPER

247 1 MITUTOYO CLIPER



250 1 INTERAPID DIAL TEST INDICATOR .0005"



253 1 MITUTOYO COORDINATE MEASURING MACHINE, MODEL B605B, RENISHAW PHI PROBE

HEAD, 38" X 38" SIZE TABLE, KAESER COMPRESSOR, MAG 1 MITUTOYO X,Y,Z, AXIS READ

OUT, PANASONIC KX-P 1624 MULTI MODE PRINTER

254 1 RENISHAW PHI FORCE CMM PROBE STYLUS MODULE FOR MITUTOYO CMM COORDINATE

MACHINE

255 1 PRECISION TOOL MAKER VISE

256 1 MITUTOYO 0"-12" DIAL CALIPER

257 1 FOWLER 0"-24" DIAL CALIPER

258 1 MITUTOYO DIAL BORE GAUGE 1.4"-4"

259 1 BROTHER TYPE WRITER MACHINE

260 1 INSPECSION PRECISION 1-2-3 BLOCK

261 1 CARBIDE INSERT



264 1 THREADING CNC TOOL HOLDER INDEXABLE INSERT

265 1 HDT PRECISION INSPECTION 50 BLOCK

266 1 PRECISION INSPECSION V BLOCK

267 1 BTC 3 JAW LATHE CHUCK

268 1 BOOKSHELF

269 1 FILE CABINET

270 1 CANNON PC850 COPIER MACHINE

271 1 OFFICE FILE CABINET

272 1 PAX MASTER RIBBON TYPE WRITER

273 1 MACHINERY DATA HAND BOOK

Page 7 of 7

prototype cnc machining, turning & machine shop · machinery management inc. dba mri auctions...

Documents