ao-v-110abANNEXURE - ATECHNICAL SPECIFICATIONS FOR MS - PTFE VESSELSf:\PROJECTS\HPLD\AO_NEW\ANNEXPTFE VESSELSSl.NO.DESCRIPTIONSPECIFICATIONS1Tag No.AO-V-110 A / B2Qty (No.)23TypeVERTICAL, CYLINDRICAL, CONICAL ENDS4Operating Temp.100C5Operating Pressure40 Torr vacuum/0.5 kgs/cm26Design Temp.250C7Design PressureFULL VACUUM/ 6 kgs/cm28FLANGE DRILL STD.ANSI 16.5 B, RF 150 PSI9TANK SIZEDIA: 550mm x HT 1180mm10TANK THKNESSSHELL: 6 thk MS + 3 thk PTFEENDS: 6 thk MS + 3 thk PTFE11BODY FLANGE25 mm THK. MS+ 3 thk PTFE12LIFTING LUGSMS IS206213SUPPORTING LUGSMS IS206214NOZZLES150 NB01 NOS100 NB01 NOS with Dip Pipe (50 NB)50 NB03 NOS15GASKETPTFE16FASTNERSS 30417DIP PIPEMS + PTFE (3 mm thk. lining)

ao-c-101TECHNICAL SPECIFICATIONS FOR HCl SCRUBBERf:\PROJECTS\HPLD\AO_NEW\ANNEXPTFE VESSELSS.NO.DESCRIPTIONSPECIFICATIONS1Tag No.AO-C-1012Qty (No.)13TypeVERTICAL, CYLINDRICAL, CONICAL ENDS4Operating Temp. (deg. C)100C5Operating Pressure kg/cm2Atmospheric6Design Temp. (deg. C)250C7Design Pressure kg/cm26 kg/cm8FLANGE DRILL STD.ANSI 16.5 B, RF 150 PSI9SCRUBBER SIZEDIA: 400mm x HT 4700mm [Total Length]10SCRUBBER THKNESSSHELL: MS 6 mm thk. + 3 MM PTFEENDS: MS 6 mm thk. + 3 MM PTFE11BODY FLANGE25 mm THK. MS+ 3THK PTFE12GRATING14 mm thk MS Plate (3mm Teflon lining on both side) with 3 mm PTFE lined Slotted Plate (12 mm slots)13LIFTING LUGSMS IS 206214SUPPORTING LUGSMS IS 206215NOZZLES150 NB01 NOS. (Hand Hole)125 NB01 NOS. with 100 NB Pure PTFE bend100 NB01 NOS. with 50 NB PTFE lined spray nozzle50 NB01 NOS.16GASKETPTFE17FASTNERSS 304Note : 1. The Top Dish End of the column AO - C - 101 shall be in the scope of HPLL.