pttme cadworx plant professional in plant engineering
TRANSCRIPT
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
1/14
CADWorx Plant Professional in Plant EngineeringChayan Srisawat
PTT Maintenance and Engineering Company Limited
May 9, 2013
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
2/14
PTT Maintenance and Engineering Company Limited
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
3/14
PTT Maintenance and Engineering Company Limited
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
4/14
PTT Maintenance and Engineering Company Limited
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
5/14
PTT Maintenance and Engineering Company Limited
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
6/14
CADWorx Plant Professional in Plant Engineering
PTT Global Chemical Public Company Limited, spin offengineering team working mainly to plant modification and
small capital project (less than 30 Million Baht)
Small modification in plant will be add more pipeline
connect from one location to another, temporarily or
permanent, tie in works.
Small CAPEX will be new equipment such as spare pump,
new cooler or new unit.
Some of these work need to be completed with the limited
of time, to solve plant operation problem.
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
7/14
CADWorx Plant Professional in Plant Engineering
In the past, I-Sketch(now SmartPlant Isometrics) wasimplemented and used as a tools for generating isometrics
drawing from sketch with plant piping specification.
Limited on design review. Change of work depend on the
quality of the sketch (piping design work) and experience
of designer.
Most of the work need field adjustment, change order and
more man hour spent on As Built.
Change raised from the operation during construction
even the drawings were approved for construction.
Number of small modification increase
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
8/14
CADWorx Plant Professional in Plant Engineering
Need Improvement? Reducing the re-work, reduce the field change, eliminate
change from operation.
Solution
SEE BEFORE BE BUILT idea -> need 3D Model review
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
9/14
CADWorx Plant Professional in Plant Engineering
Communication between designer and operation start with3D Model review. Discussion between party eliminate the
change during construction after agreed on such review.
Model can be used as communication tool for construction
contractor. They can see and make better construction
planning based on 3D model.
Even engineering cost may increase, but job execution
was quite smooth. 3D model could be shared not only the
operator but also for safety and maintenance, collecting
concerned issue and reduce the re-work.
They love to SEE BEFORE BE BUILT
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
10/14
Sample of Work done and In progress
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
11/14
Sample of Work done and In progress
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
12/14
Sample of Work done and In progress
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
13/14
Sample of Work done and In progress
-
7/27/2019 PTTME Cadworx Plant Professional in Plant Engineering
14/14
CADWorx Plant Professional in Plant Engineering
Question and Suggestion