Publications / Publikationsliste

Prof. Dr.—Ing. Hans Jürgen Maier

A. Books / Buchveröffentlichungen

1. R. Bürgel, H.J. Maier, T. NiendorfHandbuch Hochtemperatur-Werkstofftechnik, 4. Auflage, Vieweg+Teubner, Wein-heim, 2011

B. Peer-Reviewed Articles / Originalarbeiten

1. H. J. Maier, W. Popp, H. KaescheAMethod to Evaluate the Critical Hydrogen Concentration for Hydrogen—InducedCrack PropagationActa Metall., 35, 1987, pp. 875—880.

2. Th. Uihlein, G. Eggeler, H. J. MaierOn the Effect of Temperature Cycling on the Coating of a Pack Aluminized LowAlloy Steel (13 CrMo 44)Z. Werkstofftechn., 18, 1987, pp. 235—239.

3. H. J. Maier, H. KaeschePlastic Deformation —A Major Factor in Hydrogen Embrittlement of Low AlloySteelMater. Sci. Eng. A, 117, 1989, pp. L11—L15.

4. H. J. Maier, H. KaescheEnvironmental Effects on the Dislocation Arrangement of Fatigued Low AlloySteelScripta Metall., 24, 1990, pp. 123—128.

5. H. J. Maier, B. RuppEnvironmental Effects on the X—Ray Line Profiles of Fatigued Low Alloy SteelScripta Metall., 24, 1990, pp. 353—358.

6. H. J. Maier, A. Schettler, H. KaescheA Hydrogen Permeation Study of Cyclically Deformed Low Alloy SteelWerkstoffe und Korrosion, 42, 1991, pp. 212—218.

7. R.R. Keller, H. J. Maier, H. Renner, H. MughrabiLocal Lattice Parameter Measurements in a Creep—Deformed Nickel—Base Super-alloy by Convergent Beam Electron DiffractionScripta Metall. Mater., 27, 1992, pp. 1167—1172, and 28, 1993, p. 661.

8. R.R. Keller, H. J. Maier, H. MughrabiCharacterization of Interfacial Dislocation Networks in a Creep—Deformed Nickel—Base SuperalloyScripta Metall. Mater., 28, 1993, pp. 23—28.

9. J. Lendvai, A. Borbély, H. J. Maier, T. UngárThe Lattice Mismatch of δ’Particles in an Al—Li AlloyZ. Metallkd., 84, 1993, pp. 324—328.

10. A. Borbély, H. J. Maier, H. Renner, S. Straub, T. Ungár, W. BlumLong—Range Internal Stresses in Steady—State Subgrain StructuresScripta Metall. Mater., 29, 1993, pp. 7—12.

11. H. J. Maier, O. Schneeweiss, B. DonthKinetics of Fatigue—Induced Phase Transformation in a Metastable Austenitic304L—Type Steel at Low TemperaturesScripta Metall. Mater., 29, 1993, pp. 521—526.

12. H. J. Maier, H. Renner, H. MughrabiLocal Lattice Parameter Measurements in Cyclically Deformed Copper by Con-vergent Beam Electron DiffractionUltramicroscopy, 51, 1993, pp. 136—145.

13. H. J. Maier, B. Donth, M. Bayerlein, H. Mughrabi, B. Meier, M. KestenOptimierte Festigkeitssteigerung eines metastabilen austenitischen Stahles durchwechselverformungsinduzierte Martensitumwandlung bei tiefen TemperaturenZ. Metallkd., 84, 1993, pp. 820—826.

14. S. Christiansen, M. Albrecht, H.P. Strunk, H. J. MaierStrained State of Ge(Si) Islands on Si —Finite Element Calculations and Compa-rison to Convergent Beam Electron—Diffraction MeasurementsAppl. Phys. Lett., 64, 1994, pp. 3617—3619.

15. R.R. Keller, H. J. Maier, H. Renner, H. MughrabiLocal Internal Stress Characterization in a Tensile—Deformed Copper Single Cry-stal by Convergent Beam Electron DiffractionPhil. Mag. A., 70, 1994, pp. 329—340.

16. H. J. Maier, W. Popp, H. KaescheEffects of Hydrogen on Ductile Fracture of a Spheroidized Low Alloy SteelMater. Sci. Eng. A, 191, 1995, pp. 17—26.

17. H. J. Maier, H.—J. ChristModelling of Cyclic Stress—Strain Behavior Under Thermomechanical FatigueConditions —A New Approach Based Upon a Multi—Component ModelScripta Mater., 34, 1996, pp. 609—615.

18. H. J. Maier, R.R. Keller, H. Renner, H. Mughrabi, A. PrestonOn the Unique Evaluation of Local Lattice Parameters by Convergent—Beam Elec-tron DiffractionPhil. Mag. A., 74, 1996, pp. 23—43.

2

19. S. Straub, W. Blum, H. J. Maier, T. Ungár, A. Borbély, H. RennerLong—Range Internal Stresses in Cell and Subgrain Structures of Copper DuringDeformation at Constant StressActa Mater., 44, 1996, pp. 4337—4350.

20. H. J. Maier, H.—J. ChristModeling of Cyclic Stress—Strain Behavior and Damage Mechanisms Under Ther-momechanical Fatigue ConditionsInt. J. Fatigue, 19, 1997, pp. S267—S274.

21. R.P. Skelton, H. J. Maier, H.—J. ChristThe Bauschinger Effect, Masing Model and the Ramberg—Osgood Relation forCyclic Deformation in MetalsMater. Sci. Eng. A, 238, 1997, pp. 377—390.

22. I. Karaman, H. Sehitoglu, H. J. Maier, M. BalzerStress—State Effects on the Stress—Induced Martensitic Transformation of Carbu-rized 4320 SteelMetall. Mater. Trans. A, 29A, 1998, pp. 427—437.

23. K. Gall, H. Sehitoglu, H. J. Maier, K. JacobusStress—Induced Martensitic Phase Transformations in Polycrystalline CuZnAl Sha-pe Memory Alloys Under Different Stress StatesMetall. Mater. Trans. A, 29A, 1998, pp. 765—773.

24. H. J. MaierHigh—Temperature Fatigue of Titanium AlloysMater. at High Temperatures, 15, 1998, pp. 3—14.

25. P. Pototzky, H. J. Maier, H.—J. ChristThermomechanical Fatigue Behavior of the High—Temperature Titanium AlloyIMI 834Metall. Mater. Trans. A, 29A, 1998, pp. 2995—3004.

26. A. Jung, H. J. Maier, H.—J. ChristHigh-Temperature Fatigue Behaviour and Microstructure of a Dispersoid-Strengthened and SiC-Reinforced Aluminium Alloyin: Microstructure and Mechanical Properties of Metallic High-Temperature Ma-terials (H. Mughrabi, G. Gottstein, H. Mecking, H. Riedel and J. Tobolski, Eds),Wiley-VCH, Weinheim, 1999, pp. 34—49.

27. T. J. Smith, H. J. Maier, H. Sehitoglu, E. Fleury, J. AllisonModeling High-Temperature Stress-Strain Behavior of Cast Aluminum AlloysMetall. Mater. Trans. A, 30A, 1999, pp. 133—146.

28. K. Gall, H. Sehitoglu, Y. I. Chumlyakov, I.V. Kireeva, H. J. MaierThe Influence of Aging on Critical Transformation Stress Levels and MartensiteStart Temperatures in NiTi: Part I —Aged Microstructure and Micro—MechanicalModelingJ. Eng. Mater. Techn., 121, 1999, pp. 19—27.

3

29. K. Gall, H. Sehitoglu, Y. I. Chumlyakov, I.V. Kireeva, H. J. MaierThe Influence of Aging on Critical Transformation Stress Levels and MartensiteStart Temperatures in NiTi: Part II —Discussion of Experimental ResultsJ. Eng. Mater. Techn., 121, 1999, pp. 28—37.

30. S. Hardt, H. J. Maier, H.—J. ChristHigh-Temperature Fatigue Damage Mechanisms in Near—α Titanium AlloyIMI 834Int. J. Fatigue, 21, 1999, pp. 779—789.

31. A.H.M. Krom, H. J. Maier, R.W. J. Koers, A. BakkerThe Effect of the Strain Rate on the Hydrogen Distribution in Round TensileSpecimensMater. Sci. Eng. A, 271, 1999, pp. 22—30.

32. H. Sehitoglu, X. Qing, T. Smith, H. J. Maier, J. A. AllisonStress-Strain Response of Cast 319—T6 AluminumUnder Thermo—Mechanical Loa-dingMetall. Mater. Trans. A, 31A, 2000, pp. 139—151.

33. H. J. Maier, R.G. Teteruk, H.-J. ChristModeling Thermomechanical Fatigue Life of High-Temperature Titanium AlloyIMI 834Metall. Mater. Trans. A, 31A, 2000, pp. 431—444.

34. P. Pototzky, H. J. Maier, H.—J. ChristBehavior of the High—Temperature Titanium Alloy IMI 834 under Thermo—Mechanical and Isothermal Fatigue Conditionsin: Thermo-Mechanical Fatigue Behavior of Materials: Third Volume, ASTM STP1371 (H. Sehitoglu and H. J. Maier, Eds), American Society for Testing and Ma-terials, West Conshohocken, PA, 2000, pp. 18—35.

35. H. Sehitoglu, T. J. Smith, H. J. MaierThermo-Mechanical Deformation of Al 319 —T7BWith Small Secondary DendriteArm Spacingin: Thermo-Mechanical Fatigue Behavior of Materials: Third Volume, ASTM STP1371 (H. Sehitoglu and H. J. Maier, Eds), American Society for Testing and Ma-terials, West Conshohocken, PA, 2000, pp. 53—68.

36. A. Jung, H. J. Maier, H.—J. ChristEffect of SiC-Reinforcement on Thermo-Mechanical Fatigue of a Dispersion—Strengthened High—Temperature Aluminum Alloyin: Thermo-Mechanical Fatigue Behavior of Materials: Third Volume, ASTM STP1371 (H. Sehitoglu and H. J. Maier, Eds), American Society for Testing and Ma-terials, West Conshohocken, PA, 2000, pp. 167—185.

37. M. Heilmaier, H. J. Maier, A. Jung, M. Nganbe, F.E.H. Müller, H.—J. ChristCyclic Stress-Strain Response of the ODS Nickel-Base Superalloy PM 1000 UnderVariable Amplitude Loading at High TemperaturesMater. Sci. Eng. A, 281, 2000, pp. 37—44.

4

38. I. Karaman, H. Sehitoglu, K. Gall, Y. I. Chumlyakov, H. J. MaierDeformation of Single Crystal Hadfield Steel by Twinning and SlipActa Mater., 48, 2000, pp. 1345—1359.

39. I. Karaman, H. Sehitoglu, A.J. Beaudoin, Y. I. Chumlyakov, H. J. Maier, C.N.ToméModeling the Deformation Behavior of Hadfield Steel Single and Polycrystals Dueto Twinning and SlipActa Mater., 48, 2000, pp. 2031—2047.

40. H. Sehitoglu, I. Karaman, R. Anderson, X. Zhang, K. Gall, H.J. Maier, Y. Chum-lyakovCompressive Response of NiTi Single CrystalsActa Mater., 48, 2000, pp. 3311—3326, 48, 2001, p. 747.

41. U. Ahrens, G. Besserdich, H.J. MaierSpannungsabhängiges bainitisches und martensitisches Umwandlungsverhalten ei-nes niedrig legierten StahlsHTM, 55, 2000, pp. 329—338.

42. H. Sehitoglu, I. Karaman, X. Zhang, H. Kim, Y. Chumlyakov, H.J. Maier, I.KireevaDeformation of NiTiCu Shape Memory Single Crystals in CompressionMetall. Mater. Trans. A, 32A, 2001, pp. 477—489.

43. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, I. KireevaThe Effect of Twinning and Slip on the Bauschinger Effect in Hadfield Steel SingleCrystalsMetall. Mater. Trans. A, 32A, 2001, pp. 695—706.

44. H. Sehitoglu, I. Karaman, X.Y. Zhang, Y. Chumlyakov, H.J. MaierDeformation of FeNiCoTi Shape Memory Single CrystalsScripta Mater., 44, 2001, pp. 779—784.

45. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, I. KireevaExtrinsic Stacking Faults and Twinning in Hadfield Manganese Steel Single Cry-stalsScripta Mater., 44, 2001, pp. 337—343.

46. K. Gall, K. Juntunen, H.J. Maier, H. Sehitoglu, Y.I. ChumlyakovInstrumented Micro-Indentation of NiTi Shape-Memory AlloysActa Mater., 49, 2001, pp. 3205—3217.

47. H. Sehitoglu, J. Jun, X. Zhang, I. Karaman, Y. Chumlyakov, H.J. Maier, K. GallShape Memory and Pseudoelastic Behavior of 51.5% Ni-Ti Single Crystals in So-lutionized and Overaged StateActa Mater., 49, 2001, pp. 3609—3620.

5

48. H. Sehitoglu, I. Karaman, X. Zhang, A. Viswanath, Y. Chumlyakov, H.J. MaierStrain-Temperature Behavior of NiTiCu Shape Memory Single CrystalsActa Mater., 49, 2001, pp. 3621—3634.

49. I. Karaman, H. Sehitoglu, H.J. Maier, Y.I. ChumlyakovCompeting Mechanisms and Modeling of Deformation in Austenitic Stainless SteelSingle Crystals With and Without NitrogenActa Mater., 49, 2001, pp. 3919—3933.

50. U. Krupp, H.-J. Christ, P. Lezuo, H.J. Maier, R.G. TeterukInfluence of Carbon Concentration on Martensitic Transformation in MetastableAustenitic Steels Under Cyclic Loading ConditionsMater. Sci. Eng. A, 319—321, 2001, pp. 527—530.

51. H.-J. Christ, F.O.R. Fischer, H.J. MaierHigh-Temperature Fatigue Behavior of a Near-γ Titanium Aluminide Alloy UnderIsothermal and Thermo-Mechanical ConditionsMater. Sci. Eng. A, 319—321, 2001, pp. 625—630.

52. C.C. Engler-Pinto Jr., H. Sehitoglu, H.J. Maier, T.J. FoglesongThermo-Mechanical Behavior of Cast 319 Aluminum Alloysin: Temperature-Fatigue Interaction (L. Rémy and J. Petit, Eds), Elsevier Sci.Ltd., Oxford, UK, 2002, pp. 3—13.

53. H.J. Maier, H.-J. ChristValidating the Predictive Capabilities: A Key Issue in Modelling Thermomecha-nical Fatigue Lifein: Temperature-Fatigue Interaction (L. Rémy and J. Petit, Eds), Elsevier Sci.Ltd., Oxford, UK, 2002, pp. 25—35.

54. U. Ahrens, G. Besserdich, H.J. MaierSind aufwändige Experimente zur Beschreibung der Phasenumwandlung in Stählennoch zeitgemäß?HTM, 57, 2002, pp. 99—105.

55. H.J. Maier, R.G. Teteruk, H.-J. ChristModelling Thermomechanical Fatigue LifeMater. at High Temperatures, 19, 2002, pp. 9—17.

56. H.J. Maier, U. AhrensIsothermal Bainitic Transformation in Low Alloy Steels: Factors Limiting Predic-tion of the Resulting Material’s PropertiesZ. Metallkd., 93, 2002, pp. 712—718.

57. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. MaierThe Deformation of Low-Stacking-Fault-Energy Austenitic SteelsJOM, 54, 2002, pp. 31—37.

6

58. K. Gall, H.J. MaierCyclic Deformation Mechanisms in Precipitated NiTi Shape Memory AlloysActa Mater., 50, 2002, pp. 4643—4657.

59. H. Sehitoglu, X.Y. Zhang, T. Kotil, D. Canadinc, Y. Chumlyakov, H.J. MaierShape Memory Behavior of FeNiCoTi Single and PolycrystalsMetall. Mater. Trans. A, 33A, 2002, pp. 3661—3672.

60. C.C. Engler-Pinto Jr., H. Sehitoglu, H.J. MaierCyclic Behavior of Al319-T7B Under Isothermal and Non-Isothermal Conditionsin: Thermo-Mechanical Fatigue Behavior of Materials: Fourth Volume, ASTM STP1428 (M.A. McGaw, S.Kalluri, J. Bressers, S.D. Peteves, Eds), ASTM Internatio-nal, West Conshohocken, PA, 2002, pp. 45—64.

61. H.-J. Christ, R. Teteruk, A. Jung, H.J. MaierUsing Fracture Mechanic Concepts for a Mechanism-Based Prediction of Thermo-mechanical Fatigue Lifein: Thermo-Mechanical Fatigue Behavior of Materials: Fourth Volume, ASTM STP1428 (M.A. McGaw, S.Kalluri, J. Bressers, S.D. Peteves, Eds), ASTM Internatio-nal, West Conshohocken, PA, 2002, pp. 145—163.

62. H.J. Maier, F.O.R. Fischer, H.-J. ChristEnvironmental Effects on the Isothermal and Thermomechanical Fatigue Behaviorof a Near-γ Titanium Aluminidein: Thermo-Mechanical Fatigue Behavior of Materials: Fourth Volume, ASTM STP1428 (M.A. McGaw, S.Kalluri, J. Bressers, S.D. Peteves, Eds), ASTM Internatio-nal, West Conshohocken, PA, 2002, pp. 127—141.

63. H. Sehitoglu, R. Hamilton, D. Canadinc, X.Y. Zhang, K. Gall, I. Karaman, Y.Chumlyakov, H.J. MaierDetwinning in NiTi AlloysMetall. Mater. Trans. A, 34A, 2003, pp. 5—13.

64. H.-J. Christ, A. Jung, H.J. Maier, R. TeterukThermomechanical Fatigue —Damage Mechanisms and Mechanisms-Based LifePrediction MethodsSadhana, Frontiers in Materials Science, 28, 2003, pp. 147—165.

65. R.G. Teteruk, H.-J. Christ, H.J. MaierModeling of Environmental Degradation in Fatigue Life Prediction of Near-α Ti-tanium Alloy IMI 834 Under Complex High-Temperature Loading ConditionsAdv. Eng. Mater., 5, 2003, pp. 435—440.

66. J. Hurley, A. M. Ortega, J. Lechniak, K. Gall, H.J. MaierStructural Evolution During the Cycling of NiTi Shape Memory AlloysZ. Metallkd., 94, 2003, pp. 547—552.

67. T. Kotil, H. Sehitoglu, H.J. Maier, Y.I. ChumlyakovTransformation and Detwinning Induced Electrical Resistance Variations in NiTi-CuMater. Sci. Eng. A, 359, 2003, pp. 280—289.

7

68. H.E. Karaca, I. Karaman, D.C. Lagoudas, H.J. Maier, Y.I. ChumlyakovRecoverable Stress-induced Martensitic Transformation in a Ferromagnetic CoNi-Al AlloyScripta Mater., 49, 2003, pp. 831—836.

69. D. Canadinc, I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. MaierThe Role of Nitrogen on the Deformation Response of Hadfield Steel Single Cry-stalsMetall. Mater. Trans. A, 34A, 2003, pp. 1821—1831.

70. I. Karaman, H. Ersin Karaca, H.J. Maier, Z.P. LuoThe Effect of Severe Marforming on Shape Memory Characteristics of a Ti-RichNiTi Alloy Processed Using Equal Channel Angular ExtrusionMetall. Mater. Trans. A, 34A, 2003, pp. 2527—2539.

71. K. Gall, G. Biallas, H. J. Maier, P. Gullett, M. F. Horstemeyer, D.L. McDowell,J. FanIn-Situ Observations of High Cycle Fatigue Mechanisms in Cast AM60B Magne-sium in Vacuum and Water Vapor EnvironmentsInt. J. Fatigue, 26, 2004, pp. 59—70.

72. K. Gall, G. Biallas, H.J. Maier, P. Gullet, M.F. Horstemeyer, D.L. McDowellIn-Situ Observations of Low-Cycle Fatigue Damage in Cast AM60B Magnesiumin an Environmental Scanning Electron MicroscopeMetall. Mater. Trans. A, 35A, 2004, pp. 321—331.

73. I. Nikitin, B. Scholtes, H.J. Maier, I. AltenbergerHigh Temperature Fatigue Behavior and Residual Stress Stability of Laser-shockPeened and Deep Rolled Austenitic Steel AISI 304Scripta Mater., 50, 2004, pp. 1345—1350.

74. G. Biallas, H.J. Maier, M. Essert, K. GallAusbreitungsverhalten kurzer Risse in der Magnesiumlegierung AM60BMaterialprüfung, 46, 2004, pp. 384—389.

75. C.P. Frick, A. M. Ortega, J. Tyber, K. Gall, H. J. MaierMultiscale Structure and Properties of Cast and Deformation Processed Polycry-stalline NiTi Shape-Memory AlloysMetall. Mater. Trans. A, 35A, 2004, pp. 2013—2025.

76. C. Efstathiou, H. Sehitoglu, A.J. Wagoner Johnson, R.F. Hamilton, H.J. Maier,Y. ChumlyakovLarge Reduction in Critical Stress in Co-Ni-Al Upon Repeated TransformationScripta Mater., 51, 2004, pp. 979—985.

77. M. Haouaoui, I. Karaman, H.J. Maier, K.T. HartwigMicrostructure Evolution and Mechanical Behavior of Bulk Copper Obtained byConsolidation of Micro- and Nanopowders Using Equal-Channel Angular Extru-sionMetall. Mater. Trans. A, 35A, 2004, pp. 2935—2949.

8

78. G.G. Yapici, I. Karaman, Z.P. Luo, H.J. Maier, Y.I. ChumlyakovMicrostructural Refinement and Deformation Twinning During Severe Plastic De-formation of 316L Stainless Steel at High TemperaturesJ. Mater. Res., 19, 2004, pp. 2268—2278.

79. R.F. Hamilton,H. Sehitoglu, Y. Chumlyakov, H.J. MaierStress Dependence of the Hysteresis in Single Crystal NiTi AlloysActa Mater., 52, 2004, pp. 3383—3402.

80. D. Canadinc, H. Sehitoglu, H.J. Maier, Y.I. ChumlyakovStrain Hardening Behavior of Aluminum Alloyed Hadfield Steel Single CrystalsActa Mater., 53, 2005, pp. 1831—1842.

81. D.C. Miller, C.F. Herrmann, H.J. Maier, S.M. George, C.R. Stoldt, K. GallIntrinsic Stress Development and Microstructure Evolution of Au/Cr/MultilayerThin Films Subject to AnnealingScripta Mater., 52, 2005, pp. 873—879.

82. H. Sehitoglu, T. Foglesong, H.J. MaierPrecipitate Effects on the Mechanical Behavior of Aluminum Copper Alloys - PartI: ExperimentsMetall. Mater. Trans. A, 36A, 2005, pp. 749—761.

83. H. Sehitoglu, T.J. Foglesong, H.J. MaierPrecipitate Effects on the Mechanical Behavior of Aluminum Copper Alloys - PartII: ModelingMetall. Mater. Trans. A, 36A, 2005, pp. 763—770.

84. K. Gall, G. Biallas, H.J. Maier, M.F. Horstemeyer, D.L. McDowellEnvironmentally influenced microstructurally small fatigue crack growth in castmagnesiumMater. Sci. Eng. A, 396, 2005, pp. 143—154.

85. R.F. Hamilton, H. Sehitoglu, C. Efstathiou, H.J. Maier, Y. Chumlyakov, X.Y.ZhangTransformation of Co—Ni—Al single crystals in tensionScripta Mater., 53, 2005, pp. 131—136.

86. A.J. Wagoner Johnson, R.F. Hamilton, H. Sehitoglu, G. Biallas, H.J. Maier, Y.I.Chumlyakov, H.S. WooAnalysis of Multistep Transformations in Single-Crystal NiTiMetall. Mater. Trans. A, 36A, 2005, pp. 919—928.

87. H.-J. Christ, H.J. Maier, R. TeterukThermomechanical Fatigue Behaviour of Metallic High Temperature MaterialsTrans. Indian Inst. Met., 58, 2005, pp. 197—205.

9

88. A.M. Ortega, J. Tyber, C.P. Frick, K. Gall, H.J. MaierCast NiTi Shape-Memory AlloysAdv. Eng. Mater., 7, 2005, pp. 492—507.

89. I. Nikitin, I. Altenberger, H.J. Maier, B. ScholtesMechanical and Thermal Stability of Mechanically Induced Near-Surface Nano-structuresMater. Sci. Eng. A, 403, 2005, pp. 318—327.

90. G. Biallas, M. Essert, H.J. MaierInfluence of Environment on Fatigue Mechanisms in High-Temperature TitaniumAlloy IMI834Int. J. Fatigue, 27, 2005, pp. 1485—1493.

91. C.P. Frick, A.M. Ortega, J. Tyber, A.El.M. Maksoud, H.J. Maier, Y. Liu, K. GallThermal Processing of Polycrystalline NiTi Shape Memory AlloysMater. Sci. Eng. A, 405, 2005, pp. 34—49.

92. H.J. Maier, P. Gabor, I. KaramanCyclic Stress-Strain Response and Low-Cycle Fatigue Damage in Ultrafine GrainedCopperMater. Sci. Eng. A, 410—411, 2005, pp. 457—461.

93. K. Gall, J. Tyber, V. Brice, C. P. Frick, H.J. Maier, N. MorganTensile Deformation of NiTi WiresJ. Biomed. Mater. Res. A, 75A, 2005, pp. 810—823.

94. H. Sehitoglu, C. Efstathiou, H.J. Maier, Y. ChumlyakovMagnetization, Shape Memory and Hysteresis Behavior of Single and Polycrystal-line FeNiCoTiJ. Magnetism and Magnetic Mater., 292, 2005, pp. 89—99.

95. H.E. Karaca, I. Karaman, B. Basaran, Y.I. Chumlyakov, H.J. MaierMagnetic Field and Stress Induced Martensite Reorientation in NiMnGa Ferro-magnetic Shape Memory Alloy Single CrystalsActa Mater., 54, 2006, pp. 233—245.

96. H.J. Maier, P. Gabor, N. Gupta, I. Karaman, M. HaouaouiCyclic Stress-Strain Response of Ultrafine Grained CopperInt. J. Fatigue, 28, 2006, pp. 243—250.

97. R.F. Hamilton, H. Sehitoglu, C. Efstathiou, H.J. Maier, Y. ChumlyakovPseudoelasticity in Co-Ni-Al Single and PolycrystalsActa Mater., 54, 2006, pp. 587—599.

98. H. Sehitoglu, C. Efstathiou, H.J. Maier, Y. ChumlyakovHysteresis and Deformation Mechanisms of Transforming FeNiCoTiMech. Mater., 38, 2006, pp. 538—550.

10

99. I. Karaman, H.E. Karaca, B. Basaran, D.C. Lagoudas, Y.I. Chumlyakov, H.J.MaierStress-Assisted Reversible Magnetic Field-Induced Phase Transformation inNi2MnGa Magnetic Shape Memory AlloysScripta Mater., 55, 2006, pp. 403—406.

100. J. Dadda, H.J. Maier, I. Karaman, H.E. Karaca, Y. I. ChumlyakovPseudoelasticity at Elevated Temperatures in [001] Oriented Co49Ni21Ga30 SingleCrystals under CompressionScripta Mater., 55, 2006, pp. 663—666.

101. G. G. Yapici, I. Karaman, H.J. MaierMechanical flow anisotropy in severely deformed pure titaniumMater. Sci. Eng. A, 434, 2006, pp. 294—302.

102. H.E. Karaca, I. Karaman, B. Basaran, D.C. Lagoudas,Y.I. Chumlyakov, H.J. MaierOne-Way Shape Memory Effect Due to Stress-Assisted Magnetic Field-InducedPhase Transformation in Ni2MnGa Magnetic Shape Memory AlloysScripta Mater., 55, 2006, pp. 803—806.

103. T. Niendorf, D. Canadinc, H.J. Maier, I. Karaman, S.G. SutterOn the Fatigue Behavior of Ultrafine-Grained Interstitial-Free SteelInt. J. Mater. Res., 97, 2006, pp.1328—1336.

104. D. Meyer, H.J. Maier, J. Dadda, I. Karaman, H.E. KaracaThermally and Stress-Induced Martensitic Transformation in Co—Ni—Al Ferroma-gnetic Shape Memory Alloy Single CrystalsMater. Sci. Eng. A, 438-440, 2006, pp. 875—878.

105. H. Haouaoui, I. Karaman, H.J. MaierFlow Stress Anisotropy and Bauschinger Effect in Ultrafine Grained CopperActa Mater., 54, 2006, pp. 5577—5488.

106. J.D. Callaway, H. Sehitoglu, R.F. Hamilton, K. Aslantas, N. Miller, H.J. Maier,Y. ChumlyakovMagnetic Shape Memory in Ni2MnGa as Influenced by Applied StressAppl. Phys. Lett., 89, 2006, pp. 2219051—2219053.

107. I. Nikitin, I. Altenberger, M.A. Cherif, P. Juijerm, H.J. Maier, B. ScholtesFestwalzen bei erhöhten Temperaturen zur Steigerung der SchwingfestigkeitHTM, 61, 2006, pp. 289—295.

108. S. Dendorfer, H.J. Maier, J. HammerDeformation Behaviour of Bovine Cancellous BoneTechn. and Health Care, 14, 2006, pp. 549—556.

109. J. Tyber, J. McCormick, K. Gall, R. DesRoches, H.J. Maier, A.El.M. MaksoudStructural Engineering with NiTi. I: Basic Materials CharacterizationJ. Eng. Mech., 133, 2007, pp. 1009-1018.

11

110. J. McCormick, J. Tyber, R. DesRoches, K. Gall, H. J. MaierStructural Engineering with NiTi. II: Mechanical Behavior and ScalingJ. Eng. Mech. 133, 2007, pp. 1019—1029.

111. D. Canadinc, H. Sehitoglu, H.J. Maier, D. Niklasch, Y.I. ChumlyakovOrientation Evolution in Hadfield Steel Single Crystals under Combined Slip andTwinningInt. J. Solids Struct., 44, 2007, pp. 34—50.

112. D.C. Miller, C.F. Herrmann, H.J. Maier, S.M. George, C.R. Stoldt, K. GallThermo-Mechanical Evolution of Multilayer Thin Films: Part I. Mechanical Be-havior of Au/Cr/Si MicrocantileversThin Solid Films, 515, 2007, pp. 3208—3223.

113. D.C. Miller, C.F. Herrmann, H.J. Maier, S.M. George, C.R. Stoldt, K. GallThermo-Mechanical Evolution of Multilayer Thin Films: Part II. MicrostructureEvolution in Au/Cr/Si MicrocantileversThin Solid Films, 515, 2007, pp. 3224—3240.

114. E.G. Astafurova, I.V. Kireeva, Y.I. Chumlyakov, H.J. Maier, H. SehitogluThe Influence of Orientation and Aluminium Content on the Deformation Mecha-nisms of Hadfield Steel Single CrystalsInt. J. Mater. Res., 98, 2007, pp. 144—149.

115. D. Canadinc, H. Sehitoglu, H.J. MaierThe Role of Dense Dislocation Walls on the Deformation Response of AluminumAlloyed Hadfield Steel PolycrystalsMater. Sci. Eng. A, 454-455, 2007, pp. 662—666.

116. I. Karaman, M. Haouaoui, H.J. MaierNanoparticle Consolidation Using Equal Channel Angular Extrusion at RoomTemperatureJ. Mater. Sci., 42, 2007, pp. 1561—1576.

117. G. Biallas, H.J. MaierIn-situ Fatigue in an Environmental Scanning Electron Microscope —Potential andCurrent LimitationsInt. J. Fatigue, 29, 2007, pp. 1413—1425.

118. J. Dadda, D. Canadinc, H.J. Maier, I. Karaman, H. E.Karaca, Y. I. ChumlyakovStress-Strain-Temperature Behaviour of [001] Single Crystals of Co49Ni21Ga30 Fer-romagnetic Shape Memory Alloy under CompressionPhil. Mag. A, 87, 2007, pp. 2313—2322.

119. D. Canadinc, J. Dadda, H.J. Maier, I. Karaman, H.E. Karaca, Y.I. ChumlyakovOn the Role of the Cooling Rate and Crystallographic Orientation on the ShapeMemory Properties of CoNiAl Single Crystals under CompressionSmart Mater. Struct., 16, 2007, pp. 1006—1015.

12

120. R.F. Hamilton, H. Sehitoglu, C. Efstathiou, H.J. MaierMechanical Response of NiFeGa Alloys Containing Second-phase ParticlesScripta Mater., 57, 2007, pp. 497—499.

121. H.E. Karaca, I. Karaman, B. Basaran, D.C. Lagoudas, Y.I. Chumlyakov, H.J.Maier

On the Stress-Assisted Magnetic Field-Induced Phase Transformation in Ni2MnGaFerromagnetic Shape Memory AlloysActa Mater., 55, 2007, pp. 4253—4269.

122. R.F. Hamilton, H. Sehitoglu, C. Efstathiou, H.J. MaierInter-martensitic Transitions in Ni-Fe-Ga Single CrystalsActa Mater., 55, 2007, pp. 4867—4876.

123. T. Niendorf, D. Canadinc, H.J. Maier, I. KaramanOn the Microstructural Stability of Ultrafine-Grained Interstitial-Free Steel underCyclic LoadingMetall. Mater. Trans. A, 38A, 2007, pp. 1946—1955.

124. P. Gabor, D. Canadinc, H.J. Maier, R.J. Hellmig, Z. Zuberova, J. EstrinThe Influence of Zirconium on the Low-Cycle Fatigue Response of Ultrafine-Grained CopperMetall. Mater. Trans. A, 38A, 2007, pp. 1916—1925.

125. T. Niendorf, D. Canadinc, H.J. Maier, I. Karaman, G.G. YapiciMicrostructure - Mechanical Property Relationships in Ultrafine-grained NbZrActa Mater.,55, 2007, pp. 6596—6605.

126. J.D. Callaway, R.F. Hamilton, H. Sehitoglu, N. Miller, H.J. Maier, Y. ChumlyakovShape Memory and Martensite Deformation Response of Ni2MnGaSmart Mater. Struct., 16, 2007, pp. S108—S114.

127. D. Canadinc, H.J. Maier, M. Haouaoui, I. KaramanOn the Cyclic Stability of Nanocrystalline Copper Obtained by Powder Consoli-dation at Room TemperatureScripta Mater., 58, 2008, pp. 307—310.

128. T. Niendorf, D. Canadinc, H.J. Maier, I. KaramanThe Role of Heat Treatment on the Cyclic Stress-Strain Response of Ultrafine-grained Interstitial-free SteelInt. J. Fatigue, 30, 2008, pp. 426—436.

129. T. Niendorf, H. J. Maier, D. Canadinc, G.G. Yapici, I. KaramanImprovement of the Fatigue Performance of an Ultrafine-grained Nb-Zr Alloy byNano-sized Precipitates formed by Internal OxidationScripta Mater., 58, 2008, pp. 571—574.

130. S. Dendorfer, H.J. Maier, D. Taylor, J. HammerAnisotropy of the Fatigue Behaviour of Cancellous BoneJ. Biomechanics, 41, 2008, pp. 636—641.

13

131. H.J. Maier, S. Tschumak, U. Weidig, K. SteinhoffFunctional Gradation of Low Alloy Steel by Differentially Controlled Phase Trans-formationSteel Research Int., 79, 2008, pp. 105—110.

132. H.E. Karaca, I.Karaman, A. Brewer, B. Basaran, Y.I. Chumlyakov, H.J. MaierShape Memory and Pseudoelasticity Response of NiMnCoIn Magnetic Shape Me-mory Alloy Single CrystalsScripta Mater., 58, 2008, pp. 815—818.

133. Y. Chumlyakov, E. Panchenko, I. Kireeva, I. Karaman, H. Sehitoglu, H.J. Maier,A. Tverdokhlebova, A. OvsyannikovOrientation Dependence and Tension/Compression Asymmetry of Shape Memo-ry Effect and Superelasticity in Ferromagnetic Co40Ni33Al27, Co49Ni21Ga30 andNi54Fe19Ga27 Single CrystalsMater. Sci. Eng. A, 481-482, 2008, pp. 95—100.

134. D. Canadinc, H. Sehitoglu, H.J. Maier, P. KurathOn the Incorporation of Length Scales Associated with Pearlitic and Bainitic Mi-crostructures into a Visco-Plastic Self-Consistent ModelMater. Sci. Eng. A, 485, 2008, pp. 258—271.

135. K. Gall, J. Tyber, G. Wilkesanders, S.W. Robertson, R. O. Ritchie, H.J. MaierEffect of Microstructure on the Fatigue of Hot-rolled and Cold-drawn NiTi ShapeMemory AlloysMater. Sci. Eng. A, 486, 2008, pp. 389—403.

136. R.F. Hamilton, H. Sehitoglu, K. Aslantas, C. Efstathiou, H.J. MaierInter-martensite Strain Evolution in NiMnGa single crystalsActa Mater., 56, 2008, pp. 2231—2236.

137. D. Canadinc, H.J. Maier, P. Gabor, J. MayOn the Cyclic Deformation Response of Ultrafine-grained Al-Mg Alloys at ElevatedTemperaturesMater. Sci. Eng. A, 496, 2008, pp. 114—120

138. J. Dadda, H.J. Maier, D. Niklasch, I. Karaman, H.E. Karaca , Y. I. ChumlyakovPseudoelasticity and Cyclic Stability in Co49Ni21Ga30 Shape Memory Alloy SingleCrystals at Ambient TemperatureMetall. Mater. Trans. A, 39A, 2008, pp. 2026—2039.

139. D. Niklasch, H.J. Maier, I. KaramanDesign and Application of a Mechanical Load Frame for In-situ Investigation ofFerromagnetic Shape Memory Alloys by Magnetic Force MicroscopyRev. Sci. Instruments, 79, 2008, pp. 113701-1—113701-4.

140. E. Yu. Panchenko, Yu. I. Chumlyakov, I. V. Kireeva, A. V. Ovsyannikov, H. Sehi-toglu, I. Karaman, H. J. MaierEffect of Disperse Ti3Ni4 Particles on the Martensitic Transformation in TitaniumNickelide Single CrystalsPhys. Met. Metallo., 106, 2008, pp. 577—589.

14

141. D. Niklasch, J. Dadda, H.J. Maier, I. KaramanMagneto-Microstructural Coupling During Stress-Induced Phase Transformationin Co49Ni21Ga30 Ferromagnetic Shape Memory Alloy Single CrystalsJ. Mater. Sci., 48, 2008, pp. 6890—6901.

142. C. Efstathiou, H. Sehitoglu, J. Caroll, J. Lambros, H.J. MaierFull-Field Strain Evolution During Intermartensitic Transformations in Single-crystal NiFeGaActa Mater., 56, 2008, pp. 3791—3799.

143. Yu. I. Chumlyakov, I. V. Kireeva, E. Yu. Panchenko, E. E. Timofeeva, Z. V. Po-bedennaya, S. V. Chusov, I. Karaman, H.J. Maier, E. Cesari, V. A. KirillovHigh-Temperature Superelasticity in CoNiGa, CoNiAl, NiFeGa, and TiNi Mono-crystalsRussian Phys. Journal, 51, 2008, pp. 1016—1036.

144. T. Niendorf, D. Canadinc, H. J. Maier, I. KaramanThe Role of Grain Size and Distribution on the Cyclic Stability of TitaniumScripta Mater., 60, 2009, pp. 344—347.

145. T. Niendorf, C. Lotze, D. Canadinc, A. Frehn, H.J. MaierThe Role of Monotonic Pre-deformation on the Fatigue Performance of a High-Manganese Austenitic TWIP SteelMater. Sci. Eng. A, 499, 2009, pp. 518—524.

146. B. Lin, K. Gall, H.J. Maier, R. WaldronStructure and Thermomechanical Behavior of NiTiPt Shape Memory Alloy WiresActa Biomaterialia, 5, 2009, pp. 257—267.

147. T. Niendorf, H.J. Maier, D. Canadinc, I. KaramanCyclic Stability of Ultrafine-grained Interstitial-free Steel at Elevated Temperatu-resMater. Sci. Eng. A, 503, 2009, pp. 160—162.

148. Yu. I. Chumlyakov, E. Yu. Panchenko, A. V. Ovsyannikov, S. A. Chusov, V. A.Kirillov, I. Karaman, H.J. MaierHigh-Temperature Superelasticity and the Shape-Memory Effect in [001] Co—Ni—Al Single CrystalsPhys. Met. Metallo., 107, 2009, pp. 194—205.

149. S. Dendorfer, H.J. Maier, J. HammerFatigue Damage in Cancellous Bone: An Experimental Approach from Continuumto Micro ScaleJ. Mech. Behavior of Biomed. Mater., 2, 2009, pp. 113—119.

150. H.E. Karaca, I. Karaman, B. Basaran, Y. Ren, Y.I. Chumlyakov, H.J. MaierMagnetic Field-Induced Phase Transformation in NiMnCoIn Magnetic Shape Me-mory Alloys —A New Actuation Mechanism with Large Work OutputAdv. Funct. Mater., 19, 2009, pp. 1—16.

15

151. T. Niendorf, Chr. Burs, D. Canadinc, H.J. MaierEarly Detection of Crack Initiation Sites in TiAl Alloys During Low-cycle Fatigueat High Temperatures Utilizing Digital Image CorrelationInt. J. Mater. Res., 100, 2009, pp. 603—608.

152. W.O. Ngala, H.J. MaierCreep—fatigue Interaction of the ODS Superalloy PM 1000Mater. Sci. Eng. A, 510-511, 2009, pp. 429—433.

153. H.-G. Lambers, S. Tschumak, H.J. Maier, D. CanadincRole of Austenitization and Pre-Deformation on the Kinetics of the IsothermalBainitic TransformationMetall. Mater. Trans. A, 40A, 2009, pp. 1355—1366.

154. G. Purcek, O. Saray, O. Kul, I. Karaman, G.G. Yapici, M. Haouaoui, H.J. MaierMechanical and Wear Properties of Ultrafine-grained Pure Ti Produced by Multi-pass Equal-channel Angular ExtrusionMater. Sci. Eng. A, 517, 2009, pp. 97—104.

155. T. Niendorf, J. Dadda, D. Canadinc, H.J. Maier, I. KaramanMonitoring the Fatigue-induced Damage Evolution in Ultrafine-grainedInterstitial-free Steel Utilizing Digital Image CorrelationMater. Sci. Eng. A, 517, 2009, pp. 225—234.

156. J. Dadda, H.J. Maier, I. Karaman, Y.I. ChumlyakovCyclic Deformation and Austenite Stabilization in Co35Ni35Al30 Single CrystallineHigh-temperature Shape Memory AlloysActa Mater., 57, 2009, pp. 6123—6134.

157. E.G. Astafurova, Y.I. ChumlyakovThe Effect of Aluminum Alloying on Ductile-to-brittle Transition in Hadfield SteelSingle CrystalInt. J. Fract., 160, 2009, pp. 143—149.

158. H.-G. Lambers, S. Tschumak, H.J. Maier, D. CanadincPre-Deformation — Transformation Plasticity Relationship During MartensiticTransformationMater. Sci. Eng. A, 527, 2010, pp. 625—633.

159. J.A. Monroe, I. Karaman, H.E. Karaca, Y.I. Chumlyakov, H.J. MaierHigh-temperature Superelasticity and Competing Microstructural Mechanisms inCo49Ni21Ga30 Shape Memory Alloy Single Crystals under TensionScripta Mater., 62, 2010, pp. 368—371.

16

160. T. Niendorf, H.J. MaierCharakterisierung der Schädigungsentwicklung in ultrafeinkörnigem IF Stahl mit-tels digitaler BildkorrelationMP Materials Testing, 52, 2010, pp. 27—35.

161. T. Niendorf, F. Rubitschek, H.J. Maier, J. Niendorf, H.A. Richard, A. FrehnFatigue Crack Growth - Microstructure Relationships in a High-manganese Aus-tenitic TWIP SteelMater. Sci. Eng. A, 527, 2010, pp. 2412—2417.

162. J. Ma, I. Karaman, H.J. Maier, Y.I. ChumlyakovSuperelastic Cycling and Room Temperature Recovery of Ti74Nb26 Shape MemoryAlloyActa Mater., 58, 2010, pp. 2216—2224.

163. D. Canadinc, T. Niendorf, H.J. MaierOn the Coupled Temperature - Strain Rate Sensitivity of Ultrafine-grainedInterstitial-free SteelScripta Mater., 63, 2010, pp. 544—547.

164. E. Biyikli, D. Canadinc, H.J. Maier, T. Niendorf, S. TopThree-Dimensional Modeling of the Grain Boundary Misorientation Angle Distri-bution Based on Two-Dimensional Experimental Texture MeasurementsMater. Sci. Eng. A, 527, 2010, pp. 5604—5612.

165. T. Niendorf, F. Rubitschek, H.J. Maier, D. Canadinc, I. KaramanOn the Fatigue Crack Growth - Microstructure Relationship in Ultrafine-GrainedInterstitial-Free SteelJ. Mater. Sci., 45, 2010, pp. 4813—4821.

166. T. Kayser, B. Klusemann, H.-G. Lambers, H.J. Maier, B. SvendsenCharacterization of Grain Microstructure Development in the Aluminum AlloyEN AW-6060 During ExtrusionMater. Sci. Eng. A, 527, 2010, pp. 6568—6573.

167. J. Lackmann, R. Regenspurger, M. Maxisch, G. Grundmeier, H.J. MaierDefect Formation in Thin Polyelectrolyte Films on Polycrystalline NiTi SubstratesJ. Mech. Behavior of Biomed. Mater., 3, 2010, pp. 436—445.

168. M.D. Sangid, H. Sehitoglu, H.J. Maier, T. NiendorfGrain Boundary Characterization and Energetics of SuperalloysMater. Sci. Eng. A, 527, 2010, pp. 7115—7125.

169. E. Panchenko, Y. Chumlyakov, H.J. Maier, E. Timofeeva, I. KaramanTension/Compression Asymmetry of Functional Properties in [001]-oriented Fer-romagnetic NiFeGaCo Single CrystalsIntermetallics, 18, 2010, pp. 2458—2463.

170. E.G. Astafurova, G.G. Zakharova, H.J. MaierHydrogen-induced Twinning in <001> Hadfield Steel Single CrystalsScripta Mater., 63, 2010, pp. 1189—1192.

17

171. J. Dadda, H.J. Maier, I. Karaman, Y. ChumlyakovHigh-temperature In-situ Microscopy During Stress-induced Phase Transformati-ons in Co49Ni21Ga30 Shape Memory Alloy Single CrystalsInt. J. Mater. Res., 101, 2010, pp. 1503—1513.

172. H.-G. Lambers, S. Tschumak, H. J. MaierOn the Effect of Plasticity on the Kinetics of the Isothermal Bainitic Transforma-tionInt. J. Microstructure and Materials Properties, 5, 2010, pp. 328—337.

173. M.D. Sangid, H.J. Maier, H. SehitogluA Physically-based Fatigue Model for Prediction of Crack Initiation from Persi-stent Slip Bands in PolycrystalsActa Mater., 59, 2011, pp. 328—341.

174. K.C. Atli, I. Karaman, R.D. Noebe, H.J. MaierComparative Analysis of the Effects of Severe Plastic Deformation and Thermo-mechanical Training on the Functional Stability of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory AlloyScripta Mater., 64, 2011, pp. 315—318.

175. R.F. Hamilton, S. Dilibal, H. Sehitoglu, H.J. MaierUnderlying Mechanism of Dual Hysteresis in NiMnGa Single CrystalsMater. Sci. Eng. A, 528, 2011, pp. 1877—1881.

176. F. Parvizian, A. Güzel, A. Jäger, H.-G. Lambers, B. Svendsen, A. E. Tekkaya, H.J. MaierModeling of Dynamic Microstructure Evolution of EN AW—6082 Alloy During HotForward ExtrusionComp. Mater. Sci., 50, 2011, pp. 1520—1525.

177. G. Purcek, G.G. Yapici, I. Karaman, H.J. MaierEffect of Commercial Purity Levels on the Mechanical Properties of Ultrafine-Grained TitaniumMater. Sci. Eng. A, 528, 2011, pp. 2303—2308.

178. M. Maxisch, C. Ebbert, B. Torun, N. Fink, T. de los Arcos, J. Lackmann, H.J.Maier, G. GrundmeierPM-IRRAS Studies of the Adsorption and Stability of Organophosphonate Mo-nolayers on Passivated NiTi SurfacesApplied Surface Sci., 257, 2011, pp. 2011—2018.

179. S. Dilibal, H. Sehitoglu, R.F. Hamilton, H.J. Maier, Y. ChumlyakovOn the Volume Change in Co—Ni—Al During PseudoelasticityMater. Sci. Eng. A, 528, 2011, pp. 2875—2881, and 528, 2011, p. 4268.

180. J. Lackmann, T. Niendorf, M. Maxisch, G. Grundmeier, H.J. MaierHigh-resolution In-situ Characterization of the Surface Evolution of a Polycrystal-line NiTi SMA-alloy Under Pseudoelastic DeformationMater. Characterization, 62, 2011, pp. 298—303.

18

181. R. Mahnken, A. Schneidt, S. Tschumak, H.J. MaierOn the Simulation of Austenite to Bainite Phase TransformationComp. Mater. Sci., 50, 2011, pp. 1823—1829.

182. H.-G. Lambers, S. Tschumak, H.J. Maier, D. CanadincOn the Bainitic and Martensitic Phase Transformation Behavior and the Mecha-nical Properties of Low Alloy 51CrV4 SteelInt. J. Struct. Changes in Solids, 3, 2011, pp. 15-27.

183. T. Niendorf, D. Canadinc, H.J. MaierFatigue Damage Evolution in Ultrafine-grained Interstitial-free SteelAdv. Eng. Mater., 13, 2011, pp. 275—280.

184. D. Canadinc, E. Biyikli, T. Niendorf, H.J. MaierExperimental and Numerical Investigation of the Role of Grain Boundary Misori-entation Angle on the Dislocation —Grain Boundary InteractionsAdv. Eng. Mater., 13, 2011, pp. 281—287.

185. E.G. Astafurova, M.S. Tukeeva, G.G. Zakharova, E.V. Melnikov, H.J. MaierThe Role of Twinning on Microstructure and Mechanical Response of SeverelyDeformed Single Crystals of High-manganese Austenitic SteelMater. Characterization, 62, 2011, pp. 588—592.

186. M.C. Uslu, D. Canadinc, H.-G. Lambers, S. Tschumak, H.J. MaierModeling the Role of External Stresses on the Austenite-to-Bainite Phase Trans-formation in 51CrV4 SteelModelling Simul. Mater. Sci. Eng., 19, 2011, pp. 045007.

187. D. Canadinc, T. Niendorf, H.J. MaierA Comprehensive Evaluation of Parameters Governing the Cyclic Stability ofUltrafine-grained FCC AlloysMater. Sci. Eng. A, 528, 2011, pp. 6345—6355.

188. O. Saray, G.Purcek, I. Karaman, T. Niendorf, H.J. MaierEqual-channel Angular Sheet Extrusion of Interstitial-free (IF) Steel: Microstruc-tural Evolution and Mechanical PropertiesMater. Sci. Eng. A, 528, 2011, pp. 6573—6583.

189. T. Ezaz, H. Sehitoglu, H.J.MaierEnergetics of Twinning in Martensitic NiTiActa Mater., 59, 2011, pp. 5893—5904.

190. M.D. Sangid, H.J. Maier, H. SehitogluThe Role of Grain Boundaries on Fatigue Crack Initiation —An Energy ApproachInt. J. Plasticity, 27, 2011, pp. 801—821.

191. M.D. Sangid, H.J. Maier, H. SehitogluAn Energy-based Microstructure Model to Account for Fatigue Scatter in Poly-crystalsJ. Mech. Phys. Solids, 59, 2011, pp. 595—609.

19

192. J. Ma, I. Karaman, B. Kockar, H.J. Maier, Y.I. ChumlyakovSevere Plastic Deformation of Ti74Nb26 Shape Memory AlloysMater. Sci. Eng. A, 528, 2011, pp. 7628—7635.

193. B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Troester, H.J. MaierIn-situ Characterization of the Deformation and Failure Behavior of Non-stochasticPorous Structures Processed by Selective Laser MeltingMater. Sci. Eng. A, 528, 2011, pp. 7962—7967.

194. M.D. Sangid, G.J. Pataky, H. Sehitoglu, R.G. Rateick,T. Niendorf, H.J. MaierSuperior Fatigue Crack Growth Resistance, Irreversibility and Fatigue CrackGrowth —Microstructure Relationship of Nanocrystalline AlloysActa Mater., 59, 2011, pp. 7340—7355.

195. E. Yu. Panchenko, E. E. Timofeeva, L. P. Kazantseva, Yu. I. Chumlyakov, H.J.MaierThe Effect of Heat Treatment on Mechanisms of Martensitic Transformations inFerromagnetic Ni49Fe18Ga27Co6 Single CrystalsRussian Phys. Journal, 53, 2011, pp. 1219—1222.

196. T. Niendorf , J. Lackmann, B. Gorny, H.J. MaierIn situ Characterization of Martensite Variant Formation in Nickel-titanium ShapeMemory Alloy Under Biaxial LoadingScripta Mater., 65, 2011, pp. 915—918.

197. H.-G. Lambers, S.Tschumak, H.J. Maier, D. CanadincEvolution of Transformation Plasticity During Bainitic TransformationInt. J. Mater. Res., 102, 2011, pp. 1152—1163.

198. G. Purcek, O. Saray, F. Rubitschek, T. Niendorf, H.J. Maier, I. KaramanEffect of Internal Oxidation on Wear Behavior of Ultrafine-grained Nb—ZrActa Mater., 59, 2011, pp. 7683—7694.

199. I. V. Kireeva, Yu. I. Chumlyakov, A. V. Tverskov, H.J. MaierEffect of Hydrogen on Orientation Dependence of Critical Shear Stress and Me-chanism of Straining in Single Crystals of Stable Stainless SteelTechn. Phys. Letters, 37, 2011, pp. 522—525.

200. T. Ezaz, H. Sehitoglu, H.J. MaierEnergetics of (114) Twinning in B2 NiTi Under Coupled Shear and Shuffl eActa Mater., 60, 2011, pp. 339—348.

201. R.M. Kemper, T. Schupp, M. Häberlen, T. Niendorf, H.J. Maier, A. Dempewolf,F. Bertram, J. Christen, R. Kirste, A. Hoffmann, J. Lindner, D.J. AsAnti-phase Domains in Cubic GaNJ. Appl. Phys., 110, 2011, pp. 123512-1—123512-5.

202. E.Y. Panchenko, Y.I. Chumlyakov, H.J. Maier, V.A. Kirillov, A.S. KanafievaCharacteristic Features of Development of Thermoelastic Transformations in AgedSingle Crystals of a CoNiAl Ferromagnetic AlloyRussian Phys. Journal, 54, 2011, pp. 721—728.

20

203. A. Güzel, A. Jäger, F. Parvizian, H.-G. Lambers, A.E. Tekkaya, B. Svendsen, H.J.MaierA New Method for Determining Dynamic Grain Structure Evolution During HotAluminum ExtrusionJ. Mater. Process. Techn., 212, 2012, 323—330.

204. F. Rubitschek, T. Niendorf, I. Karaman, H.J. MaierCorrosion Fatigue Behavior of a Biocompatible Ultrafine-grained Niobium Alloyin Simulated Body FluidJ. Mech. Behavior of Biomed. Mater., 5, 2012, pp. 181—192.

205. M.D. Sangid, G.J. Pataky, H. Sehitoglu, R.F. Hamilton, H.J. MaierHigh Resolution Analysis of Opening and Sliding in Fatigue Crack GrowthInt. J. Fatigue, 37, 2012, pp. 134—145.

206. C.J. Rüsing, T. Niendorf, J. Lackmann, A. Frehn, H.J. MaierMicrostructure — Deformation Relationships in Fine Grained High ManganeseTWIP Steel —The Role of Local TextureInt. J. Mater. Res., 103, 2012, pp. 12—16.

207. F. Rubitschek, T. Niendorf, I. Karaman, H.J. MaierMicrostructural Stability of Ultrafine-grained Niobium—zirconium Alloy at Eleva-ted TemperaturesJ. Alloys and Compounds, 517, 2012, pp. 61—68.

208. A. Böhner, T. Niendorf, D. Amberger, H.W. Höppel, M. Göken, H.J. MaierMartensitic Transformation in Ultrafine-grained Stainless Steel AISI 304L UnderMonotonic and Cyclic LoadingMetals, 2, 2012, pp. 56—64.

209. M.J. Holzweissig, D. Canadinc, H.J. MaierIn-situ Characterization of Transformation Plasticity During an IsothermalAustenite-to-Bainite Phase TransformationMater. Characterization, 65, 2012, pp. 100—108.

210. S.M. Toker, F. Rubitschek, T. Niendorf, D. Canadinc, H.J. MaierAnisotropy of Ultrafine-grained Alloys Under Impact Loading - The Case of Bio-medical Niobium-ZirconiumScripta Mater., 66, 2012, pp. 435—438.

211. H.-G. Lambers, C.J. Rüsing, T. Niendorf, D. Geissler, J. Freudenberger, H.J. MaierOn the Low-cycle Fatigue Response of Pre-strained Austenitic Fe61Mn24Ni6.5Cr8.5Alloy Showing TWIP EffectInt. J. Fatigue, 40, 2012, 51—60.

212. H.-G. Lambers, D. Canadinc, H.J. MaierEvolution of Transformation Plasticity in Austenite-to-Bainite Phase Transforma-tion: A Multi Parameter ProblemMater. Sci. Eng. A, 541, 2012, pp. 73—80.

21

213. R. Zhu, S. Li, I. Karaman, R. Arroyave, T. Niendorf, H.J. MaierMulti-phase Microstructure Design of a Low-alloy TRIP-assisted Steel Through aCombined Computational and Experimental MethodologyActa Mater., 60, 2012, pp. 3022—3033.

214. G. Purcek, O. Saray, I. Karaman, H.J. MaierHigh Strength and High Ductility of Ultrafine-Grained, Interstitial-Free Steel Pro-duced by ECAE and AnnealingMetall. Mater. Trans. A, 43A, 2012, pp. 1884—1894.

215. M.J. Holzweissig, D. Canadinc, H.J. MaierIn-situ Characterization of Backstress Effects on the Austenite-to-Bainite PhaseTransformationScripta Mater., 67, 2012, pp. 368—371.

216. T. Ezaz, H.Sehitoglu, W.Abuzaid, H.J.MaierHigher Order Twin Modes in Martensitic NiTi —The (201) CaseMater. Sci. Eng. A, 558, 2012, pp. 422—430.

217. G.J. Pataky, M.D. Sangid, H. Sehitoglu, R.F. Hamilton, H.J. Maier, P. SofronisFull Field Measurements of Anisotropic Stress Intensity Factor Ranges in FatigueEng. Fracture Mech., 94, 2012, pp. 13—28.

218. O. Saray, G. Purcek, I. Karaman, H.J. MaierImpact Toughness of Ultra-fine Grained Interstitial-free SteelsMetall. Mater. Trans. A, 43A, 2012, pp. 4320—4330.

219. T. Niendorf, C.J. Rüsing, A. Frehn, Y.I. Chumlyakov, H.J. MaierDeformation Mechanisms in High-Manganese Steels Showing Twinning-inducedPlasticity: Fine- grained Material and Single Crystals at Ambient and CryogenicTemperaturesScripta Mater., 67, 2012, pp. 875—878.

220. H. Sehitoglu, J. Wang, H.J. MaierTransformation and Slip Behavior of Ni2FeGaInt. J. Plasticity, 39, 2012, pp. 61—74.

22

C. Papers in conference proceedings and other books / Sonstige Veröffentli-chungen in Tagungsbänden und Buchbeiträge

1. H. J. Maier, H. KaescheAspects of Hydrogen Effects on Fracture Processes in Low Alloy Steelin: Hydrogen Effects on Material Behavior (N. R. Moody and A.W. Thompson,Eds), The Minerals, Metals & Materials Society, 1990, pp. 733—743.

2. H. J. Maier, H. KaescheFatigue Crack Growth Mechanism of a Spheroidized Low Alloy Steel in GaseousHydrogen Environmentin: Proc. 4th Int. Conf. on Fatigue and Fatigue Thresholds, FATIGUE ’90, Hon-olulu, Hawaii, July 15 — 20, 1990 (H. Kitagawa and T. Tanaka, Eds), MCEP,Birmingham, 1990, pp. 1795—1800.

3. H. Kaesche, H. J. MaierHydrogen—Dislocation Interactions During Plastic DeformationBulletin of the American Physical Society, 37, 1992, pp. 311—312.

4. S. Straub, H. J. Maier, H. Renner, W. Blum, A. Borbély, T. UngárComparison of Long—Range Internal Stresses of Deformed Cu—Polycrystals in theTransition from Cells to SubgrainsVerhandl. DPG, 17A, 1993, p. 1290.

5. H. J. Maier, B. Donth, M. Bayerlein, H. MughrabiStrength Enhancement of 304L Stainless Steel by Fatigue—Induced Low—Temperature Martensitic Transformationin: Proc. 5th Int. Conf. on Fatigue and Fatigue Thresholds, FATIGUE ’93, Mon-treal, Canada, May 3 —7, 1993 (J.—P. Bailon and J. I. Dickson, Eds), EMAS Ltd,U.K., 1993, pp. 85—90.

6. H. J. Maier, H.—J. Christ, J. Hammer, R. SchindlerErosion of Hard Coatings by Rain—Impactin: Proc. Euromat’94 Topical, Balatonszéplak, Hungary, May 30 —June 1, 1994(B. Vorsatz and E. Szöke, Eds), Hungarian Mining and Metallurgical Society, 1994,pp. 482—487.

7. H. J. Maier, J. Manzke, H.—J. ChristCyclic Deformation Behavior of the β—Titanium Alloy Timetal 21Sin: Proc. 4th European Conf. on Advanced Materials and Processes, Euromat ’95,Vol. II, Padua/Venice, Italy, Sept. 25 —28, 1995, AIM, Milano, 1995, pp. 215—220.

8. H. J. Maier, K. Rausch, H.—J. ChristBehaviour of a SiC—Particulate Reinforced Aluminium Alloy Under Cyclic LoadingConditionsin: Proc. 6th Int. Fatigue Congress, FATIGUE ’96, Berlin, Germany, May 6 —10, 1996, (G. Lütjering and H. Nowack, Eds), Elsevier Sci. Ltd, U.K., 1996, pp.1469—1474.

23

9. H. J. Maier, W. Popp, H. KaescheHydrogen Effects on Cyclic Deformation Behaviour of a Low Alloy Steelin: Hydrogen Effects in Materials, (A.W. Thompson and N.R. Moody, Eds), TheMinerals, Metals & Materials Society, 1996, pp. 343—353.

10. P. Pototzky, H. J. Maier, H.—J. ChristThermomechanisches Ermüdungsverhalten der Hochtemperaturtitanlegierung IMI834in: Tagungsband zur Werkstoffwoche ’96, Band 7 — MaterialwissenschaftlicheGrundlagen (F. Aldinger and H. Mughrabi, Eds), DGM—InformationsgesellschaftVerlag, Frankfurt, 1997, pp. 385—390.

11. H. J. Maier, H.—J. ChristModellierung des zyklischen Spannungs—Dehnungsverhaltens bei thermomecha-nischer Beanspruchung auf Basis eines Verbundmodellsin: Tagungsband zur Werkstoffwoche ’96, Band 7 — MaterialwissenschaftlicheGrundlagen (F. Aldinger and H. Mughrabi, Eds), DGM—InformationsgesellschaftVerlag, Frankfurt, 1997, pp. 367—372.

12. A. Jung, H. J. Maier, H.—J. ChristCyclic Deformation Behaviour of a SiC—Particulate Reinforced Aluminium Alloyat High Temperaturesin: Proc. Euromat’97, Vol. 1, Maastricht, The Netherlands, April 21 —23, 1997(L.A. J. L. Sarton and H.B. Zeedijk, Eds), Netherlands Society for MaterialsScience, Zwijndrecht, 1997, pp. 277—282.

13. K. Gall, H. Sehitoglu, H. J. MaierAsymmetric Stress—Strain Response in Shape Memory Alloysin: Plasticity ’97: The Sixth Int. Symp. on Plasticity and it’s Current Applications,Juneau, USA, 1997, pp. 153—155.

14. H. J. MaierRißbildung bei zyklischer Beanspruchungin: Ermüdungsverhalten metallischer Werkstoffe (H.—J. Christ, Ed.), Werkstoff—Informationsgesellschaft mbH, Frankfurt, 1998, pp. 59—73.

15. H. J. MaierErmüdungsverhalten bei hoher und variierender Temperaturin: Ermüdungsverhalten metallischer Werkstoffe (H.—J. Christ, Ed.), Werkstoff—Informationsgesellschaft mbH, Frankfurt, 1998, pp. 175—191.

16. S. Hardt, H. J. Maier, H.—J. ChristThe Effect of Creep Pre—Deformation on High—Temperature Fatigue Behaviour ofthe Titanium Alloy IMI 834in: Proc. Fourth Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviourof Materials, Garmisch—Partenkirchen, Sept. 7 —11, 1998 (K.—T. Rie and P.D.Portella, Eds), Elsevier Sci. Ltd, Oxford, 1998, pp. 9—14.

24

17. T. J. Smith, H. Sehitoglu, X. Qing, H. J. MaierThe Influence of SDAS on TMF Response of Al 319 Alloysin: Proc. Fourth Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviourof Materials, Garmisch—Partenkirchen, Sept. 7 —11, 1998 (K.—T. Rie and P.D.Portella, Eds), Elsevier Sci. Ltd, Oxford, 1998, pp. 167—172.

18. R.G. Teteruk, H. J. Maier, H.—J. ChristFatigue—Induced Martensitic Transformation in Metastable Stainless Steelsin: Proc. Fourth Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviourof Materials, Garmisch—Partenkirchen, Sept. 7 —11, 1998 (K.—T. Rie and P.D.Portella, Eds), Elsevier Sci. Ltd, Oxford, 1998, pp. 321—326.

19. A. Jung, H. J. Maier, H.—J. ChristLow—Cycle Fatigue Behaviour and Lifetime Prediction of a SiC—Particulate Rein-forced Aluminium Alloy at Elevated Temperaturesin: Proc. 12th Bienniel Conf. on Fracture, ECF 12, Sheffi eld, Sept. 14 —18, 1998(M.W. Brown, E.R. de los Rios and K. J. Miller, Eds), EMAS Ltd, UK, 1998, pp.303—308.

20. R.G. Teteruk, H.J. Maier, H.-J. ChristA New Approach to Life Prediction Under Complex High-Temperature LoadingConditions of Titanium Alloysin: Proc. Int. Conf. on Environmental Degradation of Engineering Materials, Sept.19 — 23, 1999 (A. Zielinski, D. Desjardins, J. Łabanowski and J. Cwiek, Eds),Gdansk Sci. Soc., Gdansk, Polen, 1999, pp. 239—247.

21. H. J. Maier, T. J. Smith, H. SehitogluModeling High-Temperature Fatigue Behavior of Cast 319-Type Aluminum Alloysin: Werkstoff und Automobilantrieb, VDI-Berichte 1472, VDI-Gesellschaft Werk-stofftechnik, Düsseldorf, 1999, pp. 409—422.

22. F.O.R. Fischer, H. J. Maier, H.—J. ChristIsotherme Hochtemperaturermüdungsversuche an γ—TiAl in unterschiedlichen At-mosphärenin: Proc. Werkstoffwoche’98 (R. Stauber, C. Liesner, R. Bütje and M. Bannasch,Eds), Wiley-VCH, Weinheim, 1999, pp. 514—519.

23. A. Jung, U. Krupp, H.J. Maier, H.-J. ChristSchädigungsmechanismen und Lebensdauerprognose einer SiC-partikelverstärktenund dispersionsgehärteten Aluminiumlegierung bei hohen Temperaturenin: Verbundwerkstoffe und Werkstoffverbunde (K. Schulte and K.U. Kainer, Eds),Wiley-VCH, Weinheim, 1999, pp. 183—188.

24. H.J. Maier, R.G. Teteruk, H.-J. ChristModeling of Cyclic Stress-Strain Behavior and Life Prediction of Near-α TitaniumAlloy IMI 834 Under Thermomechanical Fatigue Conditionsin: Materials for Transportation Technology: Euromat’99 —Volume 1 (P.J. Wink-ler, Ed.), Wiley-VCH, Weinheim, 2000, pp. 283—290.

25

25. U. Ahrens, H.J. MaierSpannungsabhängiges Umwandlungsverhalten niedriglegierter Stählein: Berichtsband Gefüge und daraus resultierende Bauteileigenschaften, 13.-14.April 2000, Aachen, Arbeitsgemeinschaft Wärmebehandlung undWerkstofftechnike.V., Schlangenbad, 2000, pp. 41—47.

26. H.J. Maier, S. Hardt, P. Pototzky, H.-J. ChristCyclic Stress-Strain Response of High-Temperature Titanium Alloy IMI 834 UnderThermomechanical Fatigue Conditionsin: Titanium’99 Science and Technology (I.V. Gorynin and S.S. Ushkov, Eds),Vol. I, CRISM, Saint-Petersburg, Russia, 2000, pp. 450—457.

27. F.O.R. Fischer, H.J. Maier, H.-J. ChristInfluence of Environment, Mean Stress and Temperature on the Low-Cycle FatigueBehaviour of a Near-γ Titanium Aluminidein: Titanium’99 Science and Technology (I.V. Gorynin and S.S. Ushkov, Eds),Vol. II, CRISM, Saint-Petersburg, Russia, 2000, pp. 820—827.

28. U. Ahrens, G. Besserdich, H.J. MaierEffect of Stress on the Bainitic and Martensitic Phase Transformation Behaviourof a Low Alloy Tool Steelin: Advances in Mechanical Behaviour, Plasticity and Damage, Euromat 2000- Volume 2 (D. Miannay, P. Costa, D. Francois and A. Pineau, Eds), Elsevier,Oxford, 2000, pp. 817—822.

29. A. Jung, H.-J. Christ, H.J. MaierHigh-Temperature Fatigue Behaviour and Damage Mechanisms of a SiC-Reinforced and Dispersoid-Strengthened Aluminium Alloyin: Advances in Mechanical Behaviour, Plasticity and Damage, Euromat 2000 —Volume 2 (D. Miannay, P. Costa, D. Francois and A. Pineau, Eds), Elsevier, Ox-ford, 2000, pp. 973—978.

30. R.G. Teteruk, H.J. Maier, H.-J. ChristA Life Prediction Model for Creep-Fatigue and Thermomechanical Fatigue Loa-ding Conditionsin: Materials Week Conf. Proceedings 2000, DGM, Frankfurt, on CD-ROM.

31. H.J. MaierMicro-Mechanical Modelling of Materials Propertiesin: Proc. Chinese-German Ultralight Symposium (O. Hahn and X.-S. Yi, Eds),DVS-Berichte Bd. 218, DVS-Verlag, Düsseldorf, 2001, pp. 139—149.

32. U. Ahrens, H.J. MaierMechanisches Verhalten des unterkühlten Austenits niedrig legierter Stählein: Werkstoffprüfung —Schadensanalyse und Schadensvermeidung (G. Lange andM. Pohl, Eds), Wiley-VCH, Weinheim, 2001, pp. 239—245.

26

33. K.T. Hartwig, S.N. Mathaudhu, H.J. Maier, I. KaramanHardness and Microstructure Changes in Severely Deformed and RecrystallizedTantalumin: Ultrafine Grained Materials—II (Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L.Semiatin, M.J. Saran and T.C. Lowe, Eds), The Minerals, Metals & MaterialsSociety, Warrendale, PA, 2002, pp. 151—160.

34. H. Sehitoglu, C.C. Engler-Pinto Jr., H.J. Maier, T. FoglesongThermomechanical Deformation of Al319 Alloys with Different Iron Contentsin: High-Temperature Fatigue, Proc. Int. Conf. on Applied Mech., Mat. Sci. andJoing and Forming Processes (G. Biallas, H.J. Maier, O. Hahn, K. Herrmann andF. Vollertsen, Eds), Bonifatius Verlag, Paderborn, 2002, pp. 76—83.

35. R.G. Teteruk, H.J. Maier, H.-J. ChristA Simple Concept of Thermomechanical Fatigue Life Prediction Based on a Su-perposition of Time-Dependent and Cycle-Dependent Damagein: High-Temperature Fatigue, Proc. Int. Conf. on Applied Mech., Mat. Sci. andJoing and Forming Processes (G. Biallas, H.J. Maier, O. Hahn, K. Herrmann andF. Vollertsen, Eds), Bonifatius Verlag, Paderborn, 2002, pp. 268—276.

36. H. Sehitoglu, X.Y. Zhang, Y.I. Chumlyakov, I. Karaman, K. Gall, H.J. MaierObservations on Stress-Induced Transformations in NiTi Alloysin: Proc. IUTAM Symp. on Mechanics of Martensitic Phase Transformations inSolids (Q.P. Sun, Ed), Kluwer Academic Publ., Dordrecht, The Netherlands, 2002,pp. 103-109.

37. Yu.I. Chumlyakov, E.Yu. Panchenko, I.V. Kireeva, D.A. Shaporov, V.B. Aksenov,H. Sehitoglu, I. Karaman, K. Gall, H.J. MaierThe shape memory effect and superelasticity in nickel-titanium single crystals agedunder applied stressin: J. Phys. IV France, vol. 112, EDP Sciences, Les Ulis, 2003, pp. 799—802.

38. T. Foglesong, H. Sehitoglu, H.J. MaierPrecipitate Induced Anisotropy Effects in Aluminium Alloysin: J. Phys. IV France, vol. 105, EDP Sciences, Les Ulis, 2003, pp. 239—246.

39. G. Biallas, H.J. Maier, M. Essert, K. GallIn-situ Untersuchungen zum Ausbreitungsverhalten kurzer Risse in der Magnesi-umdruckgusslegierung AM60Bin: Fortschritte der Bruch- und Schädigungsmechanik, DVM-Bericht 236, Deut-scher Verband für Materialforschung u. prüfung e.V., Berlin, 2004, pp. 153—162.

40. C. Frick, K. Gall, A. Ortega, J. Tyber, H. J. MaierFatigue and Asymmetric Deformation of NiTi Shape Memory Alloysin: Materials and Processes for Medical Devices (S. Shrivastava, Ed.), ASM Inter-national, 2004, pp. 193—198.

27

41. G. Biallas, H.J. MaierIn-situ Studies of Deformation Behavior and Damage Evolution in High-Temperature Titanium Alloy IMI 834in: Ti-2003 Science and Technology, Vol. III (G. Lütjering, J. Albrecht, Eds.),Wiley VCH, Weinheim, 2004, pp. 1949—1956.

42. H. Sehitoglu, R. Hamilton, H.J. Maier, Y. ChumlyakovHysteresis in NiTi Alloysin: J. Phys. IV France, vol. 115, EDP Sciences, Les Ulis, 2004, pp. 3—10.

43. G. Biallas, H. J. Maier, K. GallEnvironmental Influence on Fatigue Mechanisms in Cast AM60B Magnesiumin: Proc. Fifth International Conference on Low Cycle Fatigue, LCF5 (P.D. Por-tella, H. Sehitoglu, K. Hatanaka, Eds.), Deutscher Verband für Materialforschungund -prüfung, Berlin, 2004, pp. 297—302.

44. C.P. Frick, A.M. Ortega, J.Tyber, H.J. Maier, A.El.M. Maksoud, Y. Liu, K. GallThermal Processing of Polycrystalline NiTi Shape-Memory Alloysin: Materials and Processes for Medical Devices II (M. Helmus, D. Medlin, Eds.),ASM International, Materials Park, OH, 2004, pp. 32-37.

45. U. Ahrens, H.J. Maier, A.El.M. MaksoudStress Affected Transformation in Low Alloy Steels - Factors Limiting Predictionof Plastic Strainsin: J. Phys. IV France, vol. 120, EDP Sciences, Les Ulis, 2004, pp. 615—623.

46. S. Dendorfer, H.J. Maier, J. HammerStrain Evolution During Compression Fatigue of Bovine Cancelleous BoneProc. 3rd Europ. Medical and Biological Eng. Conf., Prague, 2005, 11(1).

47. H.J. Maier, H.W. HöppelFatigue Behaviour of Ultrafine Grained BCC and FCC MaterialsVerhandl. DPG, 30A, 2006, p. 415.

48. H.J. Maier, P. Gabor, T. Niendorf, I. Karaman, M. Haouaoui, S.G. SutterA Comparative Study on the Fatigue Behavior of Ultrafine Grained BCC (Inter-stitial Free Steel) and FCC (Copper) Materialsin: Proc. 9th Int. Fatigue Congress, Fatigue 2006, Elsevier, Amsterdam, 2006, onCD.

49. G. Biallas, H.J. Maier, K. GallInfluence of Humid Environment on Fatigue Behaviour of Cast AM60BMagnesiumin: Proc. 9th Int. Fatigue Congress, Fatigue 2006, Elsevier, Amsterdam, 2006, onCD.

50. H.J. Maier, C.P. Frick, A.M. Ortega, K. Gall, J. Tyber, A.El.M. MaksoudMicrostructure-Property Relationships in Polycrystalline NiTi Shape Memory Al-loysin: Proc. Int. Conf. on Shape Memory and Superelastic Technologies (M. Mert-mann, Ed.), ASM International, Materials Park, OH, 2006, pp. 15-20.

28

51. W.O. Ngala, G. Biallas, H.J. MaierIsothermal and Thermomechanical Fatigue Behavior of the ODS SuperalloyPM1000in: Proc. Int. Conf. of Fracture: Fracture of Nano and Engineering Materials (E.E.Gdoutos, Ed.), Springer, Dordrecht, The Netherlands, 2006, pp. 1241-1242. Fullpaper on CD: Springer, Dordrecht, The Netherlands, 2006, ISBN 1-4020-4971-4, 8pages.

52. P. Gabor, H.J. Maier, I. KaramanEffect of Strain Rate on Fatigue Behavior of Ultrafine Grained Copperin: Proc. Int. Conf. of Fracture: Fracture of Nano and Engineering Materials (E.E.Gdoutos, Ed.), Springer, Dordrecht, The Netherlands, 2006, pp. 209-210. Full pa-per on CD: Springer, Dordrecht, The Netherlands, 2006, ISBN 1-4020-4971-4, 8pages.

53. H. J. Maier, S. TschumakSpannungsabhängiges Phasenumwandlungsverhalten des Stahls 51CrV4 in derBainit- und Perlitstufein: Neuere Entwicklungen in der Massivumformung (M. Liewald, Ed.), MAT INFOWerkstoff-Informationsgesellschaft mbH, Frankfurt, 2007, pp. 71-82.

54. H. J. Maier, S. TschumakEffect of Stress on the Bainitic and Perlitic Transformation in 51CrV4 Steelin: New Developments in Forging Technology (M. Liewald, Ed.), MAT INFOWerkstoff-Informationsgesellschaft mbH, Frankfurt, 2007, pp. 69—80.

55. H.J. Maier, S. TschumakPhasenumwandlung in niedriglegierten Stählen: Mikrostrukturentwicklung undmechanische Eigenschaften in thermo-mechanisch gekoppelten Systemenin: Moderne thermomechanische Prozessstrategien in der Stahlumformung (K.Steinhoff, Ed.), Stahlinstitut VDEh, Düsseldorf, 2007, pp. 4—11.

56. S. Dendorfer, H.J. Maier, J. HammerHow Do Anisotropy and Age Affect Fatigue and Damage in Cancellous Bone?in: Proc. 2nd Conf. on Appl. Biomechanics, IOS Press, Amsterdam, 2008, pp.68—74.

57. T. Niendorf, Th. Marten, H.J. Maier, I. KaramanThe Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steelin: Mater. Sci. Forum, 584-586, 2008, pp. 864—869.

58. M. Schikorra, H.-G. Lambers, L. Donati, H.J. Maier, L. Tomesani, A.E. TekkayaMicrostructure Development During Extrusion of AA6060, AA6082 and AA7075Alloysin: Proc. 9th Int. Conf. on Technology of Plasticity, ICTP 2008 (D. Y. Yang, Ed.),7-11 September, 2008, Gyeongju, Korea, ISBN 978-89-5708-151-8, pp. 1471—1477.

29

59. H.-G. Lambers, S. Tschumak, H.J. MaierOn the Effect of Plasticity on the Kinetics of the Isothermal Bainitic Transforma-tionin: Proc. 2nd Int. Conf. on Distortion Engineering, IDE 2008 (H.-W. Zoch, Th.Lübben, Eds.), Bremen, Germany, 2008, pp. 347—354.

60. J. Dadda, H.J. Maier, I. KaramanHigh-temperature Pseudoelasticity of Co49Ni21Ga30 Shape Memory Alloy SingleCrystals under Compressionin: Proc. Int. Conf. on Shape Memory and Superelastic Technologies, SMST-2007(S. Miyazaki, Ed.), ASM International, Materials Park, OH, 2008, pp. 659—666.

61. T. Niendorf , H.J. Maier, D. Canadinc, I. KaramanOn the Cyclic Stability and Fatigue Performance of Ultrafine-Grained Interstitial-Free Steel under Mean StressKey Eng. Mater., 378-379, 2008, pp. 39—52.

62. H.-G. Lambers, S. Tschumak, H.J. Maier, D. CanadincTensile Properties of 51 CrV 4 Steel in Martensitic, Bainitic and Austenitic Statein: Proc. Int. Conf. on Hot Sheet Metal Forming of High-Performance Steel, CHS2

(M. Oldenburg, K. Steinhoff, B. Prakash, Eds.), Verlag Wissenschaftliche Scripten,Auerbach, Germany, 2009, pp. 77—85.

63. K. Steinhoff, H.J. Maier, D. BiermannAn Overview on Functional Gradationin: Functionally Graded Materials in Industrial Mass Production (K. Steinhoff,H.J. Maier, D. Biermann, Eds.), Verlag Wissenschaftliche Scripten, Auerbach,Germany, 2009, pp. 11—31.

64. H.J. Maier, S. Tschumak, H.-G. Lambers, D. CanadincDynamic Microstructural Changes in Thermo-Mechanically Coupled Processes -Part Iin: Functionally Graded Materials in Industrial Mass Production (K. Steinhoff,H.J. Maier, D. Biermann, Eds.), Verlag Wissenschaftliche Scripten, Auerbach,Germany, 2009, pp. 191—202.

65. H.J. Maier, H.-G. Lambers, S. TschumakDynamic Microstructural Changes in Thermo-Mechanically Coupled Processes -Part IIin: Functionally Graded Materials in Industrial Mass Production (K. Steinhoff,H.J. Maier, D. Biermann, Eds.), Verlag Wissenschaftliche Scripten, Auerbach,Germany, 2009, pp. 203—209.

66. H.-G. Lambers, B. Gorny, S. Tschumak, H.J. Maier, D. CanadincCrack growth behavior of low-alloy bainitic 51CrV4 steelProcedia Engineering 2, 2010, pp. 1373—1382.

30

67. T. Niendorf, F. Rubitschek, H.J. Maier, A. FrehnOn the Fatigue Crack Growth in High-manganese Austenitic Twip Steel - Influ-ence of the Microstructurein: Fatigue of Materials Advances and Emergences in Understanding (T.S. Srivats-an, M. Ashraf Imam, Eds.), Wiley, New Jersey, USA, 2010, 55—66.

68. H.-G. Lambers, H.J. Maier, D. CanadincDimensional Stability of 51CrV4 Steel During Bainitic Phase Transformation un-der Tensile and Compressive Stressesin: Proc. AIST Steel Properties & Applications, Assoc. Iron & Steel Techn., War-rendale, PA, USA, 2010, pp. 801—810.

69. T. Niendorf, H.J. MaierHochauflösende in-situ Verformungsanalyse: Neue Einsichten in die Vorgänge ander Werkstoffoberfläche?in: Konstruktion, Werkstoffentwicklung und Schadensanalyse, (M. Pohl, Ed.), Ver-lag Stahleisen GmbH, Düsseldorf, 2010, pp. 31—41.

70. H.-G. Lambers, M. Holzweißig, B. Schramm, H.A. Richard, H.J. MaierCrack Growth Behaviour in Functional Graded Work Piecesin: Proc. 10th Int. Conf. on Technology of Plasticity, ICTP 2011 (G. Hirt, A.E.Tekkaya, Eds.), Wiley-VCH, Weinheim, 2011, pp. 1060—1065.

71. M.J. Holzweißig, H.-G. Lambers, H.J. MaierPhase Transformation Kinetics of a Low Alloy 51 CrV 4 Steel in the Bainitic-martensitic Regimein: Proc. 3rd Int. Conf. on Distortion Engineering, IDE 2011 (H.-W. Zoch, Th.Lübben, Eds.), Bremen, Germany, 2011, pp. 369—377.

72. T. Niendorf, P. Klimala, H.J. Maier, A. FrehnThe Role of Notches on Fatigue Life of TWIP Steel in the HCF Regimein: Proc. Thermec 2011, Mater. Sci. Forum, 706-709, 2012, pp. 2205—2210.

73. H.C. Schmidt, U. Damerow, C. Lauter, B. Gorny, F. Hankeln, W. Homberg, T.Troester, H.J. Maier, R. MahnkenManufacturing Processes for Combined Forming of Multi-material Structures Con-sisting of Sheet Metal and Local CFRP ReinforcementsKey Eng. Mater., 504-506, 2012, pp. 295—300.

74. F. Brenne, T. Niendorf, H.J. MaierOptimization of Lattice Structures manufactured by Selective Laser MeltingProc. 1st Int. Conf. of the Int. J. of Structural Integrity, Porto, 2012, pp. 40—50.

31