published patent and design registration information january 30th, 2015

The Patent Office Journal 30/01/2015 22188

[ [

OFFICIAL JOURNAL

OF THE PATENT OFFICE

[ . 05/2015 : 30/01/2015 ISSUE NO. 05/2015 FRIDAY DATE: 30/01/2015

[ PUBLICATION OF THE PATENT OFFICE


INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005

effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under

the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings

on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on

this Official Journal and other information as required by the public should be addressed to the Controller

General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that

the content can be enriched.

(Chaitanya Prasad) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

30th JANUARY, 2015


CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 22191 22192

SPECIAL NOTICE : 22193 22194

EARLY PUBLICATION (DELHI) : 22195 22199

EARLY PUBLICATION (MUMBAI) : 22200 22208

EARLY PUBLICATION (CHENNAI) : 22209 22222

PUBLICATION AFTER 18 MONTHS (DELHI) : 22223 22872

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 22873 22941

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 22942 23039

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 23040 23065

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (DELHI)

: 23066 23068

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (MUMBAI)

: 23069 23070

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (CHENNAI)

: 23071 23073

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF THE GRANT (KOLKATA) : 23074 23077

INTRODUCTION TO DESIGN PUBLICATION : 23078 THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT

: 23079

COPYRIGHT PUBLICATION

: 23080 RESTORATION OF LAPSED DESIGNS UNDER SECTION 12 (2) OF THE DESIGNS ACT, 2000

: 23081

REGISTRATION OF DESIGNS : 23082 - 23137


THE PATENT OFFICE KOLKATA, 30/01/2015

Address of the Patent Offices/Jurisdictions The following are addresses of all the Patent Offices located at different places having their Territorial

Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,

Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai 400 037

Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]

4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected] The States of Andhra Pradesh, Karnataka,

Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

2 The Patent Office,

Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,

Mumbai 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387

E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya

Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

3

The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi 110075 Phone: (91)(11) 2808 1921 25 Fax: (91)(11) 2808 1920 & 2808 1940 E.mail: [email protected] The States of Haryana, Himachal Pradesh, Jammu

and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

5

The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected] Rest of India

Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.


[ , 30/01/2015

[ [ [

:- 1 [ : , ,

, , . . , , - 400 037, , : (91) (22) 24123311 : (91) (22) 24123322 . : [email protected]

4 [, , , . . . , - 600 032. : (91)(44) 2250 2081-84 : (91)(44) 2250-2066 . : [email protected] , [, ,

, 2 [,

, , . . , , - 400 037, : (91) (22) 24137701 : (91) (22) 24130387 . : [email protected] , , ,

, , .

3 [, , . 32, - 14, , - 110 075. : (91)(11) 2808 1921-25 : (91)(11) 2808 1920, 2808 1940 . : [email protected] , , , ,, , ,

5 [, , ( [) , -2, - V, , -700 091, . : (91)(33) 2367 1943/44/45/46/87 :/Fax: (91)(33) 2367 1988 . : [email protected]

: http://www.ipindia.nic.in www.patentoffice.nic.in

, 1970 () , 2005 () , 2006 , , [ [ : Controller of Patents [


SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970

as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of

opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under

section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,

2006.

Notice is also given that if any interested person requests for copies of the complete specification, drawing and

abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as

per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be

obtained, the same can be provided by the respective Patent Offices on request.

(Chaitanya Prasad) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005 and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,

Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published

containing all the activities of The Patent Office such as publication of all the patent applications after 18th

months , grant of patents & all other information in respect of the proceedings as required under the provisions

of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are

discontinued from 01/01/2009.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.


Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule 24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.2717/DEL/2013 A (19) INDIA (22) Date of filing of Application :17/09/2013 (43) Publication Date : 30/01/2015

(54) Title of the invention : UNIVERSAL BLOCK INSTRUMENT (FOR RAILWAY ABSOLUTE BLOCK SYSTEM)

(51) International classification :B61L, B61F (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA

(87) International Publication No : NA (61) Patent of Addition to Application Number Filing Date

:NA :NA

(62) Divisional to Application Number Filing Date

:NA :NA

(71)Name of Applicant : 1)JAGDISH CHANDER PANERI Address of Applicant :215-GANESH COLONY, RAOJI-KA HATA, UDAIPUR-313001. Rajasthan India (72)Name of Inventor : 1)JAGDISH CHANDER PANERI

(57) Abstract : Universal block instrument is Railway Electrification clear means this Universal Block Instrument will prevent from induce effect of AC high voltage. No. of Pages : 14 No. of Claims : 10


(12) PATENT APPLICATION PUBLICATION (21) Application No.116/DEL/2015 A (19) INDIA (22) Date of filing of Application :14/01/2015 (43) Publication Date : 30/01/2015

(54) Title of the invention : SYSTEM AND METHOD FOR FACILITATING DIAGNOSTIC AND MAINTENANCE OF A MEDICAL DEVICE (51) International classification :A61B6/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:PCT// :01/01/1900


:NA :NA


:NA :NA

(71)Name of Applicant : 1)HCL Technologies Ltd. Address of Applicant :B-39, Sector 1, Noida 201301, Uttar Pradesh, India (72)Name of Inventor : 1)BARUAH, Shantanu 2)SETHI, Rohit

(57) Abstract : Disclosed is a system for facilitating diagnostic and maintenance of a medical device used for treatment of a patient. The system comprises a data capturing module for capturing data pertaining to a medical device. The data may be captured from one or more data sources comprising Picture Archiving and Communication System (PACS), Electronic Medical Record (EMR) systems, and Device Monitoring System. Further, the system comprises an analysis module for deriving meaningful information from the data by performing data analytics on the data. Further, the system comprises a prediction module for predicting insights associated to the medical device based on the meaningful information, wherein the insights facilitate in diagnosis and maintenance of the medical device. No. of Pages : 22 No. of Claims : 8


(12) PATENT APPLICATION PUBLICATION (21) Application No.311/DELNP/2015 A (19) INDIA (22) Date of filing of Application :13/01/2015 (43) Publication Date : 30/01/2015

(54) Title of the invention : METHOD AND DEVICE FOR MEASURING LEVELS OF CAST IRON AND SLAG IN A BLAST FURNACE (51) International classification

:B22D 2/00, G01F23/22,G01F23/14,B22D11/18

(31) Priority Document No :2012/0493 (32) Priority Date :13/07/2012 (33) Name of priority country :Belgium (86) International Application No Filing Date

:PCT/EP2013/064482 :09/07/2013

(87) International Publication No :WO 2014/009367

(61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA

(71)Name of Applicant : 1)CENTRE DE RECHERCHES MTALLURGIQUES ASBL CENTRUM VOOR RESEARCH IN DE METALLURGIE VZW Address of Applicant :Boulevard de la Plaine 5 B 1050 Bruxelles Belgium (72)Name of Inventor : 1)OJEDA ARROYO Claudio 2)DURIEU Frdric 3)ESSER Eric

(57) Abstract : The present invention relates to a method for measuring the liquid metal surface level (13) and the slag surface level (14) in the crucible (1) of a metallurgical shaft furnace comprising the following steps: measuring at one or more points on the external wall (2) of the crucible the following variables: the circumferential strain in said external wall (2) by means of a number of strain gauge sensors (6) fixed to the armour (4) of the external wall (2) of the crucible; and the temperature of said external wall (2) by means of one or more temperature sensors (7) fixed to the armour (4) of the external wall (2) of the crucible; introducing said variables measured at a number of points on the external wall of the crucible into the general equation governing circumferential strain the solution of which is analytical and which contains two unknowns the liquid metal level and the overall liquid metal/slag level considering set parameters; and solving said equation and obtaining an analytical solution giving the liquid metal surface level (13) and the slag surface level (14) in the crucible (1). No. of Pages : 29 No. of Claims : 10



(54) Title of the invention : ROTATIONAL ENERGY BY GRAVITATIONAL FORCE

(51) International classification :F03G, F03B (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)JAIPARKASH Address of Applicant :JAIPARKASH S/O LATE SH. LAL SINGH VILLAGE-ALIPUR TEHSIL-SARDHANA DISTT. MEERUT Uttar Pradesh India (72)Name of Inventor : 1)JAIPARKASH

(57) Abstract : The present invention relates to a system for generating rotational energy comprising a frame having a plurality of shafts, each of which is tied with a rope, other end of which is attached to a divided weight supported on a fixed weight, which is connected to another fxed weight to generate rotational energy. It is associated with the following advantageous features:- - Cost effective. - Compact. - No Air Pollution. - Less maintenance. No. of Pages : 13 No. of Claims : 13



(54) Title of the invention : SELF SIMILARITY MEASURE FOR FRAUD MEASUREMENT

(51) International classification :G07G 1/14 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SAS INSTITUTE INC. Address of Applicant :100 SAS CAMPUS DRIVE, CARY, NORTH CAROLINA 27513, U.S.A. (72)Name of Inventor : 1)BRIAN DUKE 2)MEHMET KEREM MUEZZINOGLU 3)ANKUR GUPTA

(57) Abstract : A computerized system that processes a fraud score for a financial transaction in connection with an account is computed from retrieved data to indicate a probability of the account being in a compromised condition. A self-similarity score is computed if the computed fraud score is above a predetermined threshold to indicate similarity of the received transaction to other transactions of the account in the set of prior transactions. A suggested action to authorize or decline the transaction is determined based on the computed fraud score and the computed self-similarity score. No. of Pages : 39 No. of Claims : 39


(12) PATENT APPLICATION PUBLICATION (21) Application No.1094/MUM/2014 A (19) INDIA (22) Date of filing of Application :27/03/2014 (43) Publication Date : 30/01/2015

(54) Title of the invention : A LATCH ARRANGEMENT FOR MOTORIZED OPERATING MECHANISM OF CIRCUIT BREAKER

(51) International classification :H01H71/50,H01H71/52 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)LARSEN & TOUBRO LIMITED Address of Applicant :L & T House, Ballard Estate, P.O. Box 278, Mumbai 400 001, State of Maharashtra, India (72)Name of Inventor : 1)AMBEKAR, Mandar, M. 2)MURUKATE, Mohan, K.

(57) Abstract : The present invention relates to a stored energy operating mechanism used in circuit breaker for switchgear products. The present invention provides a motorized operating mechanism of circuit breaker with dynamic latch arrangement to assist positive closing of the circuit breaker during its reverse travel. This will allow breaker even with toggle point occurring late to be used with motorized operating mechanism and ensure positive closing of breaker. In the present invention, latch arrangement operates on centrifugal force phenomenon; hence it can be worked with any mounting position of circuit breaker without getting affected by gravity. No. of Pages : 25 No. of Claims : 9



(54) Title of the invention : DESIGN OF EQUIPMENT FOR GAS-GAS, GAS-SOLID AND GAS-SOLID-GAS REACTIONS.

(51) International classification :B01J 19/00, D01B1/02

(31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)TUNGIKAR VINOD BALWANTRAO Address of Applicant :DEPARTMENT OF PRODUCTION ENGINEERING, SGGS INSTITUTE OF ENGINEERING AND TECHNOLOGY, NANDED-431606, MAHARASHTRA, (INDIA) (72)Name of Inventor : 1)TUMME PRATIK R 2)TUNGIKAR VINOD B

(57) Abstract : At present, numerous equipments are followed for reaction kinetics. The primary aim of an industry requires minimum cost equipment and minimum area. To check the feasibility of the equipment, I carried out experiment of cottonseed delinting. This equipment fulfills the requirements of industry and is not limited to delinting of cottonseed rather it can be used in many gas-gas, gas-solid and gas-solid-gas reactions. No. of Pages : 6 No. of Claims : 3



(54) Title of the invention : SYNTHESIS OF NOVEL 3-(2-CHLOROQUINOLIN-3-YL)-N-CYCLOHEXYLQUINOXALIN-2-AMINES AND ANTIBACTERIAL ACTIVITY THEREOF

(51) International classification :C07D 471/04 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)JAIPRAKASH N. SANGSHETTI Address of Applicant :Y. B. CHAVAN COLLEGE OF PHARMACY, DR. RAFIQ ZAKARIA CAMPUS, RAUZA BAGH, AURANGABAD 431001, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)JAIPRAKASH N. SANGSHETTI 2)FIROZ A. KALAM KHAN 3)DEVANAND B. SHINDE 4)ZAHID ZAHEER 5)INDRAJEET GONJARI 6)ROHIDAS AROTE 7)RAJENDRA H. PATIL

(57) Abstract : The present invention relates to a synthesis of novel 3-(2-chloroquinolin-3-yl)-N-cyclohexylquinoxalin-2-amines and antibacterial activity thereof. A process for producing a compound of the formula (JF) Wherein R1 represents a hydrogen atom, a nitro group, a chlorine atom or a methyl group, and R2 represents a hydrogen atom, a methyl group or.a methoxyl group. which comprises step 1 of reacting a compound of the formula (1) in the presence of acetic anhydride (Ac20), glacial acetic acid (AcOH) and sodium acetate (NaOAc) to obtain a compound of the formula (2); Wherein R2 has the same meaning as defined above, which comprises, step 2 of reacting the compound of formula (2) obtained in the step 1 and phosphoryl chloride (POCI3) in presence of N,N-dimethylformamide (DMF) to obtain the compound of the formula (3). Wherein R2 has the same meaning as defined above, Wherein R1 and R2 have the same meaning as defined above. and which comprises, step 3 of reacting the compound of formula (3) obtained in the step 2, compound of formula (4) and compound of formula (5) in presence of ethanol (EtOH) using ceric ammonium nitrate (CAN) as catalyst to obtain the compound of the formula (JF). No. of Pages : 20 No. of Claims : 7



(54) Title of the invention : NOVEL POLY(ESTER-AMIDE) HOT MELT ADHESIVE USING RICINOLEIC ACID

(51) International classification

:C08G 18/60, C09J 177/12


:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MHASKE SHASHANK TEJRAO Address of Applicant :DEPARTMENT OF POLYMER AND SURFACE ENGINEERING, INSTITUTE OF CHEMICAL TECHNOLOGY, NATHALAL PAREKH MARG, MATUNGA (EAST), MUMBAI-400019, MAHARASHTRA, INDIA., (72)Name of Inventor : 1)KADAM PRAVIN GOPAL 2)VAIDYA PARTH NITIN 3)SAVVASHE PRASHANT BHAIRAVNATH 4)MHASKE SHASHANK TEJRAO

(57) Abstract : In the present invention, novel poly(ester-amide) hot melt adhesives are prepared from condensation of sebacic acid with the equivalent proportion of a mixture of ricinoleic acid and ethylenediamine. No. of Pages : 14 No. of Claims : 4



(54) Title of the invention : DESIGN OF RAILWAY PLATFORM SHED WITH TRUSSLESS ROOF. (51) International classification :B61D15/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SATISH NAGORAO MOWADE Address of Applicant :402/03, UTKARSH RAJNIGANDHA KHARE TOWN NAGPUR-10 Maharashtra India (72)Name of Inventor : 1)SATISH NAGORAO MOWADE

(57) Abstract : This is an innovative platform shed that can change the current Indian railway platform scenario which is of safe, economical, truss less (Without purlins) and maintenance free railway platform shed. It is an attractive architectural conceptual design with enough structural stability to withstand all the applied loads. Application of this shed may change the total scenario of Indian railway platforms. The whole structure is rested on a single RCC column (spacing of two RCC column is 8 m) and the girder above column is supported at its center by the column. Other two ends are cantilever. Total girder length is 9.90 m as per railway standards whereas the cantilever part will be nearly 4.5 m on each side. Galvalume sheet (trussless roof) will rest on a runner beam which is fixed at the cantilevered edge of girder. This runner beam will transfer all the loads on the girder. An arrangement of proper gutter is made for proper drainage without disturbing any movement on railway platform. This shed is successfully erected on railway platform of Nagpur railway station (India). It has proved its stability in a cyclone dated on 23rd Feb 2014 in Nagpur territory. As a case study we will deal with the details. No. of Pages : 29 No. of Claims : 2



(54) Title of the invention : ELECTRO-PNEUMATIC LAMP

(51) International classification :B60T17/22, B60T17/18 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SAUMYA JAY DHOLAKIA Address of Applicant :7, UDAY HEIGHTS, PLOT NO. H4 ADC, SECTOR NO. 26, NEAR AKURDI RLY STATION, B/H KENDRIYA SADAN, PRADHIKARAN, NIGDI, PUNE 411 044, MAHARASHTRA, INDIA (72)Name of Inventor : 1)SAUMYA JAY DHOLAKIA

(57) Abstract : A system for generating electricity for small scale applications by physical means, the said system uses a bellow foot pump that operates on foot pressure to generate sufficient amount of compressed air, the said pump then operates an air motor of required torque, the said motor then operates a dynamo used to generate sufficient amount of electricity to power the LEDs, the said dynamo is then connected to a small portable battery through a switch, the said switch if closed connects the dynamo to the battery and if opened connects the dynamo directly to the LED, the said LED can then provide sufficient amount of light for the given application. No. of Pages : 10 No. of Claims : 7



(54) Title of the invention : UTILIZATION OF COAL FLY ASH OF THERMAL POWER PLANT IN CONJUNCTION WITH CHITOSAN FOR EFFICIENT REMOVAL OF DIFFERENT HEAVY METAL IONS AND THEIR SOLIDIFICATION FOR SAFE SOLID WASTE DISPOSAL. (51) International classification :B01D53/50 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)AGARWAL, AJAY KUMAR Address of Applicant :10, SHIRISH APARTMENTS, SHASTRI LAYOUT, JAITALA ROAD, SUBHASH NAGAR, NAGPUR-440022 Maharashtra India (72)Name of Inventor : 1)AGARWAL, AJAY KUMAR 2)DR. KADU, MAHENDA S. 3)DR. PANDHURNEKAR, CHANDRASHEKHAR P. 4)MUTHREJA, ISHWARDAS L.

(57) Abstract : In our present invention, the study was undertaken to investigate the removal efficiency of different metal ions such as Ni++, Zn and Pbions from the aqueous solution in economical and environmental friendly way. For the first time, a mixture consisting of thermal power waste i.e. fly ash along with chitosan, a kind of bioadsorbant was used to remove these heavy metal ions from the aqueous solution. It was observed that the removal efficiency of Znand Pb++ions from the aqueous solution was 100%, whereas Ni1 ions within the range of 88.08 -50.49%. During these batch studies, the mixture pH was maintained at 8.5 pH and the solution was under constant stirring condition. In this process fly ash was used without any pre-treated. The waste produced from this process is fly ash and bio-sorbent containing Ni, Zn and Pbions, when solidified with the Portland cement doesnt leach out the Zn++and Pbions even after 90 days of leaching test.However, a small traces of Ni1-1 ions were leach out, but their accumulated concentration was found be very low as compared to the limits given by The Environment (Protection) Rules, 1986, Schedule - VI, India.Therefore, this proves the fact that the process invented is helpful to remove heavy metal contamination from waste water and the waste produced from the process can be disposed off in environmental friendly manner after solidifying it with the cement. No. of Pages : 4 No. of Claims : 5



(54) Title of the invention : NOVEL POLY(ESTER-AMIDE) HOT MELT ADHESIVE USING CASTOR OIL

(51) International classification

:C08G 18/60, C09J 177/12


:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)MHASKE SHASHANK TEJRAO Address of Applicant :DEPARTMENT OF POLYMER AND SURFACE ENGINEERING, INSTITUTE OF CHEMICAL TECHNOLOGY NATHALAL PAREKH MARG, MATUNGA (EAST), MUMBAI 400019, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)KADAM PRAVIN GOPAL 2)VAIDYA PARTH NITIN 3)SAVVASHE PRASHANT BHAIRAVNATH 4)MHASKE SHASHANK TEJRAO

(57) Abstract : In the present invention, novel poly(ester-amide) hot melt adhesives are prepared from condensation of sebacic acid with the equivalent proportion of a mixture of castor oil and ethylenediamine. No. of Pages : 14 No. of Claims : 4



(54) Title of the invention : MICRO-CONTROLLER BASED AUTOMATED JIG & FIXTURE FOR CURVED SURFACE DRILLING WITH INDEXING ATTACHMENT.

(51) International classification :E21B7/00, E21B44/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)TUNGIKAR VINOD BALWANTRAO Address of Applicant :DEPARTMENT OF PRODUCTION ENGINEERING, SGGS, INSTITUTE OF ENGINEERING AND TECHNOLOGY, VISHNUPURI, NANDED-431 606, MAHARASHTRA, INDIA. (72)Name of Inventor : 1)ABHALE NILESH S 2)PATIL SAGAR G 3)TUNGIKAR VINOD B

(57) Abstract : A system and method of drilling on a surface comprising an indexing rod, an indexing plate, at least one locating element, plurality of clamping units, at least one microcontroller, a motor and a locking mechanism. The method of drilling includes, withdrawing the indexing pin from the indexing plate to unlock rotary movement of the indexing rod. A first signal is sent to the stepper motor from the microcontroller to rotate the indexing rod at the desired angle. Subsequently a second signal is sent to the stepper motor from the microcontroller to stop the stepper motor when the indexing rod reaches the desired angle. This rotation of the indexing rod rotates the workpiece to the angle where a hole has to be drilled. The rotary motion of the indexing rod is then locked by inserting the indexing pin in a indexing hole of the indexing plate. No. of Pages : 6 No. of Claims : 3


(12) PATENT APPLICATION PUBLICATION (21) Application No.33/CHE/2015 A (19) INDIA (22) Date of filing of Application :02/01/2015 (43) Publication Date : 30/01/2015

(54) Title of the invention : LEUKOCYTE ESTERASE DETECTION FROM THROAT SWAB (51) International classification :C12Q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)Kumara Venkatanarayana Nibhanipudi Address of Applicant :H. No. 150/A SRT, Sanjeeva Reddy Nagar, Hyderabad, Telangana, India. (72)Name of Inventor : 1)Kumara Venkatanarayana Nibhanipudi

(57) Abstract : The present invention relates to the field of infectious diseases. The invention specifically relates to the diagnostic test for acute bacterial pharyngitis. The test is used in screening for Group A Beta Haemolytic Streptococcus by the identifying the presence of leukocyte esterase in the throat. The Leukocyte Esterase Throat Swab Test is compared to the Rapid Step Test for efficiency in terms of fast delivery of results. No. of Pages : 18 No. of Claims : 10



(54) Title of the invention : METHOD AND SYSTEM FOR DETECTING A SECURITY BREACH IN AN ORGANIZATION (51) International classification :g06q (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)ABHISHEK SUMAN 2)SREEVIDYA KHATRAVATH 3)MANIKHANTAN SANKARA RAMAN

(57) Abstract : Embodiments of the present disclosure disclose a method and a system for detecting a breach of security in an organization. The method comprises receiving input data in real-time from one or more security systems. The method further comprises analyzing the input data to generate at least one of security information in a predefined format, trajectory information on movement of one or more persons, and facial features of the one or more persons. The method further comprises correlating the security information, the trajectory information and the facial features. The method further comprises detecting the security breach in the organization based on the correlation. No. of Pages : 30 No. of Claims : 15



(54) Title of the invention : POWER FROM GRAVITATIONAL PRESSURE VARIATION SYSTEM (PGPV SYSTEM) (51) International classification :f03d (31) Priority Document No :NA(32) Priority Date :NA(33) Name of priority country :NA(86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)V.M. KRISHNA KUMAR Address of Applicant :VETTUKATTIL HOUSE, KALIYAROAD POST, CHELAKKARA, THRISSUR - 680 586 Kerala India (72)Name of Inventor : 1)V.M. KRISHNA KUMAR

(57) Abstract : A system for power generation, mainly electric power based on gravitational pressure variation, wherein no use of fuel or any kind of external energy like sunlight, wind etc. Uninterrupted power is generated, free from pollution and other environmental issues, with very low cost of production, which enables in distributing energy everywhere irrespective of time and distance, as it can be commissioned anywhere. No. of Pages : 5 No. of Claims : 3



(54) Title of the invention : AN IMPROVISED ELECTRIC SCOOTER WITH REDESIGNED BODY AND FRAME SIMULATING THE SWAN (51) International classification :b62k (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)ANOOP NISHANTH P.J Address of Applicant :NO.5, GOVINDASWAMY NAGAR, JUMBLI NEW COLONY, KODINGAIYUR, CHENNAI - 600118 Tamil Nadu India (72)Name of Inventor : 1)ANOOP NISHANTH P.J

(57) Abstract : The present invention discloses an electric scooter having a body that is designed from the inspiration of a swan for providing efficient air flow during the ride. The electric bike comprises a water proof BLDC motor (2), a deck configured to support the rider, front and back wheel base and chassis, controllers (1) placed within the wheel base under the foot rest of the driver for providing the scooters information to the driver. The electric scooter comprises one or more rechargeable and removable concealed battery packs (3) supplying the required power of 48V and 50 - 120A to the driving force of the scooter along with an anti-lock brake, a dual suspension and integrated brake and throttle control. The electric scooter design thus has the powering lithium ion/l_ifepo4/Lithium polymer electric batteries (3) mounted in a concealed under body position relative to the platform giving the swan shaped electric scooter a low center of gravity with optimal riding profile. The electric scooter is designed based on the body shape of the bird swan in order to provide a swift movement to the scooter with minimal air resistance. The rear wheel assembly includes a belt drive mechanism (5) for transferring the power from the motor (2) to the wheel base through a swing arm (4) and for forward motion and free wheel coasting. This improved electric motor scooter thus includes: a front lower frame; a front wheel assembly coupled to the front frame and residing on a surface; a rear upper frame; a back wheel assembly coupled to the rear frame and residing on the surface; and a center pivot mechanism comprising the controllers, motor, concealed batteries coupled to the front frame and the rear frame all designed in the .shape of a swan. . No. of Pages : 36 No. of Claims : 10



(54) Title of the invention : BLUE TOOTH IGNITION AND IDENTIFICATION OF TWO WHEELERS (51) International classification :H04W (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SUDHAKAR Address of Applicant :37, VINAYAGAR KOIL STREET, SOKKANATHANPET - 605 009 Pondicherry India 2)VIJAYAKUMAR (72)Name of Inventor : 1)SUDHAKAR 2)VIJAYAKUMAR

(57) Abstract : The invention discloses an application of Bluetooth in two wheeler motor vehicles and an ignition and identification system thereof, comprising the following steps: the master unit of Bluetooth of the two wheeler motor vehicle owner initiates a master/slave connection by an android mobile and the slave unit of Bluetooth arranged in the two wheeler motor vehicle to control the ignition of the engine, indicators and horn. The slave unit of Bluetooth of the vehicle is identified by the android phone of the owner. The safe mode link for pairing of this slave Bluetooth module and the android phone occurs. After successful pairing with the slave Bluetooth module, the owner or user can send command to the slave Bluetooth module using the application provided in the android phone using terminal Bluetooth. When the slave Bluetooth module fixed in the vehicle identifies the command send in by the owner then it sends out signal to control the ignition switch, indicators and the horn of the vehicle. The invention applies Bluetooth to the control of the ignition switch, indicators and horn of the vehicle by an android mobile compared with common wireless control ignition, the invention greatly enhances the security of two wheelers. No. of Pages : 14 No. of Claims : 7



(54) Title of the invention : METHOD AND SYSTEM FOR MANAGING TUNERS OF CLIENT DEVICES (51) International classification :H04n (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)WIPRO LIMITED Address of Applicant :Doddakannelli, Sarjapur Road, Bangalore 560035, Karnataka, India. (72)Name of Inventor : 1)GOWRISHANKAR SUBRAMANIAM NATARAJAN 2)HARISH NAIR RAJAGOPAL

(57) Abstract : The present disclosure relates to a method and a system for managing tuners of client devices. In one embodiment, a request to allocate a tuner for recording or playback of a broadcast program is received by one or more recording devices from one or more client devices. The system determines states and available recording space of one or more tuners associated with the client devices. The system also determines business rules associated with the client devices based on state, available recording space and type of request received. Based on the business rules, the system identifies a tuner to service the request and allocate the tuner to service the request of the client devices. Thus the system provides multiple device tuner management by identifying and assigning a tuner appropriate to service the request from client device and also identifies the correct tuner with appropriate storage space available to service the request. No. of Pages : 30 No. of Claims : 12



(54) Title of the invention : METHOD FOR MANUFACTURING A SEAMLESS COPPER CONTAINER BY SPINNING PROCESS (51) International classification :D01d (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)THOKALA SRINIVAS REDDY Address of Applicant :H. No. 8-1-168/1, Pragathi Colony, Maillardevpally, Rajendranagar, Hyderabad-500005, Telangana, India. 2)THOKALA SRISAILAM REDDY (72)Name of Inventor : 1)THOKALA SRINIVAS REDDY 2)THOKALA SRISAILAM REDDY

(57) Abstract : Exemplary embodiments of the present disclosure are directed towards a method for manufacturing a seamless copper container by spinning process. The method comprising deep drawing a copper circle to form a non uniformed piece of copper, positioning the non uniformed piece of copper on a spinning machine to form a uniformed piece of copper comprising a hallow body, and positioning the uniformed piece of copper comprising a hallow body on a die comprising a predefined shape for forming a container of a preferred geometrical shape. No. of Pages : 14 No. of Claims : 11



(54) Title of the invention : SYSTEM AND METHOD FOR CONVERTING THE BUSINESS PROCESSES TO TEST-CENTRIC ACTIVITY DIAGRAMS (51) International classification :G06F (31) Priority Document No :61/976522 (32) Priority Date :08/04/2014(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA

(71)Name of Applicant : 1)M/S CIGNITI TECHNOLOGIES LIMITED Address of Applicant :SUITE NO. 106 & 107, 6-3-456/C, MGR ESTATES, DWARAKAPURI COLONY, PUNJAGUTTA, HYDERABAD-500 082 Andhra Pradesh India (72)Name of Inventor : 1)RAJA SEKHAR NERAVATI 2)KALYANA RAO KONDA

(57) Abstract : The system and method for conversion of a business process to test-centric activity diagrams and to computationally generate automatic test suites for various quality attributes. It has been created to reduce the effort of a test engineer. The system consists of the processor 1, the parsing module 2, the analysis module 3 and the test case generator 4. The method takes an activity diagram as the input, which can be generated using UML or.any available standard business modelers and to be exported in the industry standard XMI format. The method is pro-agile as it achieves almost 100% functional coverage and has negligible dependence on conventional documentation. The method permits domain specialists and business analysts to add special, custom tags for specific validation conditions and functional checks. No. of Pages : 21 No. of Claims : 8



(54) Title of the invention : ROAD RUNNERS

(51) International classification :B60R (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)M. VARUN KUMAR Address of Applicant :NO-77 BIG STREET, KARNAMBUT VILLAGE, KATPADI TK, VELLORE DT, PIN-632519 Tamil Nadu India (72)Name of Inventor : 1)M. VARUN KUMAR 2)MANICKYAM KARTHIK 3)S. RAJESK KUMAR 4)P. RAJESH 5)S. ARJUN RAJ 6)M. VIJAYAKUMAR

(57) Abstract : Under normal circumstances, any vehicle which runs through fiiel (LPG, Petrol and Diesel) can be traced with the help of GPS technology. Through GPS device, navigation can be done for the drivers use and also we can trace the location details of the vehicle in case of theft or hijack. Still now the technology was up to locating the vehicle through GPS while during vehicle theft or unauthorized control of vehicle, but we cant stop the vehicle in the particular location where we trace. In order to tackle these kind of difficulties, we are providing a very good solution by introducing a new GSM based technology. By means of this technology, a person whose vehicle have been theft or unauthorized control, can stop his/her vehicle movement very soon by initially blocking the fuel supply to the engine then later by blocking the ignition of the vehicle and finally by blocking the sensors associated to the vehicle just by clicking a button STOP in the Road Runners android mobile application, so after secure authentication that Road Runners app sends an command as SMS to the GSM device to make automated ON the road runners mechanism and after 1 minute of delay time it again sends an command as SMS to GSM device of Road Runners mechanism connected to the Vehicle during Manufacture, while the vehicle comes to complete dead stage after it get stopped due to simulated blockages made to the (fuel and ignition) vehicle. In turn the vehicle owner will be Updated with an location SMS and the Road Runners APP facilitates the vehicle owner which contains the exact address about the vehicle location were it get stopped. No. of Pages : 36 No. of Claims : 10



(54) Title of the invention : LIGHT EMITTING DIODE AS A COGENERATION SOURCE (COGENERATION IRON BOX) (51) International classification :H01l (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)Safnil S Address of Applicant :Ambrammel house, pathimangalam Kunnamangalam p.o, Kozhikode (calicut), Kerala, India 2)Shreeganesh V Nair (72)Name of Inventor : 1)Shreeganesh V Nair 2)Safnil S

(57) Abstract : The present invention relates to a system of Cogeneration using Light Emitting Diode (LED). In one embodiment of the claimed invention, the cogeneration Iron box utilizes the capability of the LED to produce useful heat and electrical energy simultaneously. The useful heat is harnessed from the temperature of the activated pn junction and the electrical Energy is salvaged from the emitted light using photovoltaic cells. This Iron Box produces sufficient heat to replace conventional Iron Boxes and produces sufficient electrical energy to charge the on board battery. The arrangement of the cogeneration iron box comprises of a standard AC/ DC Driver energizing a designed framework of LEDs fixed on a mounting plate. This arrangement is suitable for conducting heat from the LEDs to a standard iron box plate using a heat conducting compound as the medium for controlling conductive heat loss. This arrangement is provided with a photovoltaic cell assembly facing the lit side of the LEDs to generate electricity sufficient enough to charge the on board battery. No. of Pages : 24 No. of Claims : 8



(54) Title of the invention : TABLE TOP PORTABLE MINI FRICTION WELDING MACHINE FOR MINIATURE OF WELDED JOINTS (51) International classification :b23K (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)DR. P. MARIMUTHU Address of Applicant :PRINCIPAL, SYED AMMAL ENGINEERING COLLEGE, DR. E M. ABDULLAH CAMPUS, RAMANATHAPURAM-623502 Tamil Nadu India 2)TTM. KANNAN (72)Name of Inventor : 1)DR. P. MARIMUTHU 2)TTM. KANNAN

(57) Abstract : Miniature of components with micro scaled features are increasingly required in many industries including automotive,Aeospace and Biomedical.Mini machine is the foundation of technology to produce miniature of components with high accuracy requirements in 3 dimensional features. Modern Techniques are available with wider applications in the design of small structures and models for actual machines that are made from appropriate materials. Table top mini friction welding machine is a specially designed machine for Welding of miniature of welded joints such as aluminium, copper, composite and plastic cylindrical rods.Fricton welding is a solid state welding which produce heat by conversion of Mechanical energy into Thermal energy at the interface of work during rotation under pressure. This Table top mini welding machine will perform accuracy with compromising welding tolerance. It leads to save energy, space and other basic requirements. High precision axis of motion, high loop stiffness, and good damping capacity with low vibrations, low power consumption and portable are main features of Table top mini friction welding machine. It is the first step to fabricate the Table top mini friction welding machine for small weld joints of similar and dissimilar materials in concept of small machines for small components. This table top mini welding machine will satisfy the real requirements friction welding process. The various performance tests were conducted to optimize the machine. It will be handled by any one, anytime and anywhere without much effort. No. of Pages : 9 No. of Claims : 10



(54) Title of the invention : DOUBLE SOFT COLLAR (51) International classification :A61F (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)Kumara Venkatanarayana Nibhanipudi Address of Applicant :H. No. 150/A SRT, Sanjeeva Reddy Nagar, Hyderabad, Telangana, India. (72)Name of Inventor : 1)Kumara Venkatanarayana Nibhanipudi

(57) Abstract : The present invention relates to medical devices in the field of Emergency and Intensive Care Medicine. The present invention particularly discloses the method of use of the double soft cervical collar. The present invention also particularly relates to the usefulness of double soft cervical collar over hard (Philadelphia collar) and soft cervical collars. No. of Pages : 19 No. of Claims : 10



(54) Title of the invention : METHOD AND SYSTEM FOR PROCESSING SECRET INPUT TEXT STEGANOGRAPHICALLY TO HIDE SECRET INPUT TEXT (51) International classification :h04N (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)DR KALAVATHI ALLA Address of Applicant :D.NO 11-843/3, 1/1 PATTABHI SITARAM NAGAR, NAGARALU, AMARAVATHI ROAD, GUNTUR Andhra Pradesh India (72)Name of Inventor : 1)DR KALAVATHI ALLA

(57) Abstract : The present invention describes a method and a device for processing a secret input text steganographically to hide the secret input text within a Devanagari script based text. The device is configured to perform encoding of the secret text into a first encoding pattern based upon a pre-determined criteria; encoding of a Devanagri script based cover text to a second encoding pattern based upon a criteria selected out of a plurality of Devanagri text encoding criterion; mapping the second encoding pattern with first encoding pattern to determine a degree of match; and embedding said input text within the said Devnagari script based cover text based upon the selected criteria to produce a steganographic text based upon the degree of match exceeding a threshold. The steganographic so produced text is textually identical to said cover text. No. of Pages : 38 No. of Claims : 12



(54) Title of the invention : AUTO-MANUAL AND COMPACT GRAIN CRUSHING SYSTEM (51) International classification :F16H (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA:NA


:NA:NA


:NA:NA

(71)Name of Applicant : 1)RAMADOSS SAMBATHKUMAR Address of Applicant :19/10, HOSPITAL ROAD, ARUMBAVUR(PO), VEPPANTHATTAI(TK), PERAMBALUR(DT), TAMILNADU-621103 Tamil Nadu India (72)Name of Inventor : 1)RAMADOSS SAMBATHKUMAR 2)DEEPIKA SAMBATHKUMAR 3)NALLAPAREDDIYAR RAMADOSS

(57) Abstract : The present subject matter relates to the Auto-manual and compact grain crushing system to process the material right from cleaning, soaking, crushing and cleaning the system with help of electronic control unit and user interface panel. The whole process can be completed through auto mode and or manual mode upon users desire. No. of Pages : 25 No. of Claims : 10


Publication After 18 Months: The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.10050/DELNP/2013 A (19) INDIA (22) Date of filing of Application :22/11/2013 (43) Publication Date : 30/01/2015

(54) Title of the invention : COLD ROLLED STEEL SHEET AND METHOD FOR PRODUCING SAME (51) International classification :C22C38/00,C21D9/46,C22C38/06(31) Priority Document No :2011117432 (32) Priority Date :25/05/2011 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2012/063261 :24/05/2012



:NA :NA


:NA :NA

(71)Name of Applicant : 1)NIPPON STEEL & SUMITOMO METAL CORPORATION Address of Applicant :6 1 Marunouchi 2 chome Chiyoda ku Tokyo 1008071 Japan (72)Name of Inventor : 1)TODA Yuri 2)OKAMOTO Riki 3)FUJITA Nobuhiro 4)SANO Kohichi 5)YOSHIDA Hiroshi 6)OGAWA Toshio 7)HAYASHI Kunio 8)NAKANO Kazuaki

(57) Abstract : The cold rolled steel sheet has a mean pole density of {100} {223} orientations that is between 1.0 and 5.0; a pole density of {332} crystal orientation that is between 1.0 and 4.0; an rC which is the Lankford coefficient perpendicular to the rolling direction that is between 0.70 and 1.50; an r30 which is the Lankford coefficient at a 30 angle to the rolling direction that is between 0.70 and 1.50; and a metal composition by vol% of 30 to 99% ferrite + bainite and 1 to 70% of martensite.

No. of Pages : 133 No. of Claims : 24



(54) Title of the invention : HOT ROLLED STEEL SHEET AND PROCESS FOR PRODUCING SAME (51) International classification :C22C38/00,C21D9/46,C22C38/06(31) Priority Document No :2011117432 (32) Priority Date :25/05/2011 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2012/063273 :24/05/2012



:NA :NA


:NA :NA

(71)Name of Applicant : 1)NIPPON STEEL & SUMITOMO METAL CORPORATION Address of Applicant :6 1 Marunouchi 2 chome Chiyoda ku Tokyo 1008071 Japan (72)Name of Inventor : 1)SANO Kohichi 2)HAYASHI Kunio 3)NAKANO Kazuaki 4)OKAMOTO Riki 5)FUJITA Nobuhiro

(57) Abstract : This hot rolled steel sheet has an average pole density for {100} to {223} orientations of 1.0 5.0 has a pole density for the crystal orientation {332} of 1.0 4.0 and has a metallographic structure which comprises in terms of areal proportion 30 99% ferrite and bainite and 1 70% martensite and which satisfies the following relationships (1) and (2) wherein fM is the areal proportion of the martensite in % by area dia is the average size of the martensite in m dis is the average distance between martensite grains in m and TS is the tensile strength of the steel sheet in MPa. dia=13 m (relationship 1) TS/fMdis/dia=500 (relationship 2)




(54) Title of the invention : COMPOSITIONS AND METHODS (51) International classification :C07C43/00 (31) Priority Document No :61/479493 (32) Priority Date :27/04/2011 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2012/035434:27/04/2012

(87) International Publication No :WO 2012/149302 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA

(71)Name of Applicant : 1)NORTHSHORE UNIVERSITY HEALTHSYSTEM Address of Applicant :1301 Central Street Evanston IL 60201 U.S.A. (72)Name of Inventor : 1)ROY Hemant K. 2)WALI Ramesh K. 3)KUNTE Dhananjay

(57) Abstract : Compositions comprising polyethylene glycol (PEG) are disclosed for the prophylaxis and/or treatment of head and neck squamous cell carcinomas (HNSCC). Methods for the prophylaxis and/or treatment of HNSCC comprising administering an effective amount of PEG are also disclosed. Also disclosed are methods and compositions for suppressing the surface expression of EGFR using PEG.




(54) Title of the invention : POLYMERIC NANOPARTICLES FOR DRUG DELIVERY (51) International classification :A61K9/51 (31) Priority Document No :1107719.5 (32) Priority Date :09/05/2011 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/IB2012/052320:09/05/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)INSTITUT QUIMIC DE SARRIA Address of Applicant :Via Augusta 390 E 08017 Barcelona Spain (72)Name of Inventor : 1)GOMEZ Salvador Borros 2)DI MAURO Primiano Pio

(57) Abstract : Disclosed are nanoparticles comprising a block copolymer and optionally one or more active agent(s) compositions comprising said nanoparticles and methods of preparing said nanoparticles. The block copolymer comprises blocks (i) a first polymer that is a polyester or polyamide and (ii) a second polymer comprising a hydrocarbon chain containing ester or ether bonds with hydroxyl number = 10. The active agent(s) may be present within the nanoparticles or on the surfaces of the nanoparticles. The nanoparticles may optionally be associated with a surface modifying moiety such that they are useful as drug delivery and molecular imaging devices. The surface modifying moiety may target the nanoparticles to a desired target cell tissue or biomarker.




(54) Title of the invention : SOLAR THERMAL POWER PLANT (51) International classification :F01K3/12,F03G6/06,F22B1/00 (31) Priority Document No :11166996.6 (32) Priority Date :20/05/2011 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2012/058970 :15/05/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)ALSTOM TECHNOLOGY LTD Address of Applicant :Brown Boveri Strasse 7 CH 5400 Baden Switzerland (72)Name of Inventor : 1)AGA Vipluv 2)SIMIANO Marco 3)BOSCHEK Erik

(57) Abstract : A solar thermal power plant 20 comprises a solar radiation receiver 28 mounted on a tower 22 surrounded by a heliostat field 24 to receive solar radiation reflected by heliostats 26 forming the heliostat field 24. The power plant 20 comprises a power generation circuit 30 including a steam turbine for driving an electrical generator to produce electrical power and water in the power generation circuit 30 is capable of being heated directly by solar radiation reflected onto the solar radiation receiver 28 by the heliostat field 24 to generate steam to drive the steam turbine. The power plant 20 also comprises an energy storage circuit 36 including a thermal energy storage fluid such as molten salt which is capable of being heated directly by solar radiation reflected by the heliostat field 24. A heat exchanger 44 is also provided for recovering thermal energy from the thermal energy storage fluid in the energy storage circuit 36; the recovered thermal energy may then be used to generate steam to drive the steam turbine.




(54) Title of the invention : TRITYLATED ETHERS (51) International classification :C10L1/185,C07C43/20,C10M129/16

(31) Priority Document No :61500648 (32) Priority Date :24/06/2011 (33) Name of priority country :U.S.A.

(86) International Application No Filing Date

:PCT/US2012/043718 :22/06/2012



:NA :NA


:NA :NA

(71)Name of Applicant : 1)ANGUS CHEMICAL COMPANY Address of Applicant :1500 East Lake Cook Road Buffalo Grove IL 60089 U.S.A. (72)Name of Inventor : 1)GREEN George D. 2)SWEDO Raymond

(57) Abstract : A compound having formula (PhC)Ar(OR) wherein Ph represents a phenyl group Ar is an aromatic ring system having from six to twenty carbon atoms R is C C alkyl or C C aralkyl m is one or two and n is an integer from one to four.




(54) Title of the invention : METHOD FOR CLEANING AND STRIPPING A TURBOSHAFT ENGINE BLADE USING A PULSED LASER (51) International classification :F01D5/00,F01D5/28,F01D25/00(31) Priority Document No :1153733 (32) Priority Date :02/05/2011 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2012/050972 :02/05/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)SNECMA Address of Applicant :Socit Anonyme 2 Boulevard du Gnral Martial Valin F 75015 Paris France (72)Name of Inventor : 1)HUGOT Juliette 2)BOURDIN Franck 3)FEVRIER Thierry 4)GESTIN Jrme

(57) Abstract : A method for cleaning a turboshaft engine blade (1) comprising a superalloy body covered with a coating, in which the coating of the blade (1) is at least partially machined using a pulsed laser (3), at least the feed rate of the pulsed laser (3) and the pulse frequency of the pulsed laser (3) being parameterised such that the machined surface of the blade (1) has a 10 roughness of 4 pm to 10 pm.




(54) Title of the invention : CONTACT MATERIAL FOR VACUUMINTERRUPTER AND METHOD OF MAKING A CONTACT MATERIAL (51) International classification :H01H1/02,C22C1/04,C22C27/06(31) Priority Document No :11004375.9 (32) Priority Date :27/05/2011 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2012/002250 :25/05/2012



:NA :NA


:NA :NA

(71)Name of Applicant : 1)ABB TECHNOLOGY AG Address of Applicant :Affolternstrasse 44 CH 8050 Zurich Switzerland (72)Name of Inventor : 1)SIMON Reinhard 2)GENTSCH Dietmar

(57) Abstract : Contact material for vacuum interrupter and method of making a contact material. In order to being enabled in a precise control of the Si concentration of Cu/Cr contact materials contact material has a chromium content which is above 10 wt.% and that the material is doped with silicon below 0 2 wt.% (2000 ppm Si) and the remainder is copper Cu.




(54) Title of the invention : INTERFERENCE MEASUREMENT IN WIRELESS NETWORKS (51) International classification :H04W24/10 (31) Priority Document No :61/523278 (32) Priority Date :12/08/2011 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2012/050459:10/08/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)INTERDIGITAL PATENT HOLDINGS INC. Address of Applicant :200 Bellevue Parkway Suite 300 Wilmington DE 19809 U.S.A. (72)Name of Inventor : 1)LEE Moon il 2)MARINIER Paul 3)NAYEB NAZAR Shahrokh 4)TSAI Allan Y. 5)ZHANG Guodong 6)TOOHER J. Patrick

(57) Abstract : Embodiments contemplate methods systems and apparatuses for interference measurement in a wireless communication network including wireless communication networks the employ MIMO in uplink and/or downlink communication. Embodiments contemplate identifying one or more interference measurement resource elements that may be received from one or more transmission points. Embodiments also contemplate performing interference measurement estimation based at least in part on the identified one or more interference measurement resource elements. Channel state information (CSI) perhaps in the form of reports may be generated based at least in part on the one or more interference measurement estimation. Embodiments also contemplate that the CSI report may be transmitted to one or more nodes. In some embodiments the one or more interference measurement resource elements may be received as part of a set of resource elements.




(54) Title of the invention : FURNACE WALL STRUCTURE OF MOLTEN METAL CONTAINER AND METHOD FOR CONSTRUCTING FURNACE WALL OF MOLTEN METAL CONTAINER (51) International classification :F27D1/00,C04B35/043 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:PCT/JP2012/058136 :28/03/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)NIPPON STEEL & SUMITOMO METAL CORPORATION Address of Applicant :6 1 Marunouchi 2 chome Chiyoda ku Tokyo 1008071 Japan (72)Name of Inventor : 1)UMEDA Shingo 2)KISHIGAMI Teruhisa 3)KONDO Masaaki 4)SATOYOSHI Yasunori

(57) Abstract : In this furnace wall structure of a molten metal vessel, in a case that a thickness of a furnace wall except a shell when the furnace wall is seen in a vertical cross-sectional view is set to be T (mm), a heat insulation material with a thermal conductivity of not less than 0.01 W/(mK) and not more than 0.15 W/(mK) in a range of 25C to 300C, with a mehing point of not less than 1000C and not more than I400C, and with a thickness of not less than 2 mm and not more than 10 mm is arranged in a range in a thickness direction between a position not less than 0.75xT (mm) and not more than 0.92xT from an interior surface of the magnesia carbon refractory toward the shell.




(54) Title of the invention : OILY GEL COMPOSITION (51) International classification :A61K8/55,A61K8/31,A61K8/37(31) Priority Document No :2011122998 (32) Priority Date :01/06/2011 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2012/062488 :16/05/2012


:NA :NA


:NA :NA

(71)Name of Applicant : 1)DAICEL CORPORATION Address of Applicant :3 4 5 Umeda Kita ku Osaka shi Osaka 5300001 Japan 2)NIHON UNIVERSITY (72)Name of Inventor : 1)SAKANISHI Yuichi 2)HASHIZAKI Kaname 3)SAITO Yoshihiro 4)TAGUCHI Hiroyuki

(57) Abstract : Provided is a gel-forming agent that is easy to prepare and has all the properties including high safety for the living body and the environment, satisfactory gel-forming capability, comfortable feeling upon use, and good handleability. The gel-forming agent includes a lecithin, and a polyglycerol fatty acid ester in an amount of from 30 to 150 parts by weight per 100 parts by weight of the lecithin. The polyglycerol fatty acid ester has a fatty acid residue having 14 or less carbon atoms, has an HLB of 15 or more as determined based on an organic conceptual diagram, and has a degree of glycerol polymerization of from 8 to 40.




(54) Title of the invention : INLET VALVE FOR A FLUID PUMP AND ASSEMBLY METHOD FOR AN INLET VALVE FOR A FLUID PUMP (51) International classification :F04B7/00,F04B7/0056,F04B53/10

(31) Priority Document No :10 2011 076 784.3 (32) Priority Date :31/05/2011 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2012/059990 :29/05/2012



:NA :NA


:NA :NA

(71)Name of Applicant : 1)CONTINENTAL AUTOMOTIVE GMBH Address of Applicant :Vahrenwalder Strae 9 30165 Hannover Germany (72)Name of Inventor : 1)VAN HIMME Luc 2)VERMOLEN Koen 3)MEEKERS Rudi

(57) Abstract : The invention relates to an inlet valve (101) for a fluid pump comprising a movably supported tappet (103) for closing a fluid inlet opening and an actuator (105) for moving the tappet (103) wherein the actuator (105) and the tappet (103) are formed separately from each other and can be coupled to one another by means of a coupling element (107) for transmitting an actuator driving force to the tappet (103). The invention further relates to an assembly method for an inlet valve (101).




(54) Title of the invention : PIGMENT FOR PAPER AND PAPER LAMINATE (51) International classification :D21H19/38,C09C1/00(31) Priority Document No :13/206214 (32) Priority Date :09/08/2011 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2012/050069 :09/08/2012


:NA :NA

(62) Divisional to Application Numbe

published patent and design registration information january 30th, 2015

Business