pump& sprayer section - powell's equipment part

PUMPS & SPRAY EQUIPMENT

449

PUM

PS & SPR

AYE

QU

IPME

NT

PUMP & SPRAYER SECTION

450


PUM

PS &

SPR

AYE

QU

IPM

EN

T

We have the Spot Sprayeryou are looking for atModern Ag Parts!We stock many models of 12 Volt sprayers

that can be used for a wide variety of applica-tions such as fertilizer, herbicides, pesticides,insecticides, & various other liquids. Oursprayers are built to last - Farmers, Ranchers,and Homeowners can trust Modern Ag Parts tohave the best Spot Sprayer on the markettoday!

NEW! From Modern Ag Parts60 PSI - 12 Volt -1 GPM Spot Sprayer• 1 GPM Flow Rate • On-Off switch• Shurflow 60 PSI Demand Pump• 15' of 3/8" Reinforced Vinyl Hose• Spray Wand with Auto-Trigger control

and variable spray nozzle• Drain Plug on tank for easy cleaning• Available in 15 or 25 gallon tank

MAP No. SIZE710-1501 15 Gallon710-1502 25 Gallon

NEW! From Modern Ag Parts60 PSI - 12 Volt - 1.8 GPM Spot Sprayer• 1.8 GPM Open flow rate• On-Off switch• Shurflow 60 PSI Demand Pump• 15' of 3/8" Reinforced Vinyl Hose• Spray Wand with Auto-Trigger control

and variable spray nozzle• Drain Plug on tank for easy cleaning• Available in 15 or 25 gallon tank


NEW! From Modern Ag Parts40 PSI - 12 Volt - 1 GPM Lawn-Garden Spot Sprayer• 1 GPM flow rate• 40 PSI Demand Pump• 15' of 3/8" Reinforced Vinyl hose• Spray Wand with Auto-Trigger control

and variable spray nozzle• Drain plug on tank for easy cleaning• Available in 15 or 25 gallon tank


Spot Sprayers


451

PUM

PS & SPR

AYE

QU

IPME

NT

NEW!! From Modern Ag PartsSpray Boom Kits for ATV's

These Kits contain all the necessary hardware tomount your tank on the Modern Ag Parts BoomAssembly. Kits are complete with plumbing and areavailable in 40", 10', and 16' widths. 10' & 16' boomsare 3-piece spring fold out design.

• 40" Kit includes 3 Poly Nozzels with Flat Polyspray tips

• 10' & 16' Standard Kits include Poly Nozzleswith Flood Poly spray tips on 40" spacing

• 10' & 16' Deluxe Kits include Poly Diaphragm checkvalve bodies for drip-free shutoff and Poly Flatspray tips on 20" spacing

MAP No. Mfg. No. Description701-1506 SC401-SAS 40" Economy Boom Kit710-1507 SC101-SAS 10' Standard Boom Kit710-1508 SC161-SAS 16' Standard Boom Kit710-1512 SC101-DXAS 10' Deluxe Boom Kit710-1514 SC161-DXAS 16' Deluxe Boom Kit

NEW! From Modern Ag PartsSpot Sprayer Trailer completewith 40" Spray BoomThis rugged built cart is manufactured of powder-coated 14ga. flame-cut steel. Tongue willaccept up to 5/8" pin. Cart has 10 x 4 Turf tires.40" Boom has 3 poly nozzles with flat poly spraytips. Total weight - 38 lbs. Spot sprayer shown ontrailer not included.MAP No. Mft.No.710-1535 SC-Estate

NEW! From Modern Ag PartsSpot Sprayer Replacement TanksRugged built tanks suitable for mostagricultural chemicals. Tanks havemolded in recesses for pumps, hose storage,handles,& straps. Complete with 6" cap and all necessary mounting holes.MAP No. SIZE710-1515 15 Gallon710-1516 25 Gallon

Replacement Parts for Modern Ag Parts Spot SprayersMAP No. Description710-1301 Shurflo Pump 8000-541-236710-1306 Shurflo Pump 8000-643-236710-1307 Shurflo Pump SLV10AA41710-1513 Clear Braid Hose 3/8"I.D. x 15'710-1523 Tank Lid for 15 or 25 Gallon Tank710-1504 Spray Wand Assembly Complete710-1526 Spray Tip only for Wand Assembly710-1530 Suction Strainer for inside tank710-1533 Wiring Harness710-1537 On-Off Rocker Switch710-1539 Rocker Switch Bracket

Spot Sprayers

452


PUM

PS &

SPR

AYE

QU

IPM

EN

T

4 Gallon Polyethylene Tank

MAP No. SIZE710-2002 4 Gallon

NEW! Farmate 4 GallonBackpack Sprayer

New! Shurflo's Propack Rechargeable Electric Backpack Sprayer SRS-540Brand new from Shurflo, the SRS-540 offersbreakthrough performance, convenience, versatili-ty,and comfort in a backpack sprayer. Propackeliminates the need for the operator to continually"pump up" the sprayer to maintain a constant andsteady spray pattern as with manually poweredsprayers, making spraying much faster and easierthan ever.

• Sprays up to 120 gallons (454 liters) on single charge high performance chemical resistant Shurflo pump

• Advanced microprocessor pump control• Variable speed and adjustable nozzle for light

or heavy duty spraying• Ultra comfortable ergonomic design, full back

pad, and thickly padded shoulder harness• Unique Battery pack can be charged in place,

or easily removed without tools for remote charging

• Four pump speeds can deliver delicate mist, high volume spray, or long-range stream to meet any spraying need

MAP NO.710-1565

SHURFLO 4 GALLON

Backpack Sprayers


453

PUM

PS & SPR

AYE

QU

IPME

NT

SOLO BACKPACK SPRAYERS

SOLO BACKPACK PARTS BREAKDOWN1A

THE MODEL 425 SOLO SPRAYER, WITH ITS CONNECTINGROD ACTUATED PISTON PUMP AND THE 475 SOLOSPRAYER, WITH IT'S DIAPHRAM PUMP, ARE CAPABLE OFPRODUCING A WIDE PRESSURE RANGE. (UP TO 90 PSI WITHTHE 425 AND UP TO 60 WITH THE 475) THEY ARE CAPABLEOF PERFORMING VIRTUALLY EVERY SPRAYING TASK. EASILY AND EFFECTIVELY HANDLES DISINFECTANTS, FERTILIZERS, HERBICIDES, PEST CONTROL AND FORMULATIONS FOR TREE, SHRUB AND PLANTPROTECTION (CLEAN SPRAYER BETWEEN USE). THERUGGED HIGH DENSITY. POLYTHYLENE TANK AND INTERNAL COMPONENTS WITH VITON SEALS PROVIDESLONG SERVICE AND DURABILITY.

• LARGE OPENING WITH STRAINER• 4 GALLON TANK• 90 PSI PUMP (425) • 60 PSI PUMP (475)• REVERSIBLE PUMP LEVER• ADJUSTABLE PRESSURE CONTROL• PADDED COMFORTABLE STRAP• BUILT IN FILTER SCREEN• VARIETY OF NOZZLE TIPS AVAILABLE

PART NO.709-2001709-2002

DESCRIPTIONMODEL 425 WITH PISTON PUMP

MODEL 475 WITH DIAPHRAGM PUMP

SEE PARTS LISTING ON NEXT PAGE

Solo Backpack SprayersSolo Backpack Sprayers Parts Breakdown

454


PUM

PS &

SPR

AYE

QU

IPM

EN

T425 Solo Backpack Parts ListingRepair Kit-Accessories

425 SOLO BACKPACK PARTS LISTINGPART NO.

709-2065709-2141700-2206700-5001700-5103709-2093709-2092709-2091709-2089709-2090709-2060

709-2061709-2087709-2100709-2058709-2086709-2056709-2055709-2053709-2085

709-2083709-2082709-2081709-2080709-2079

709-2076709-2126709-2099709-2075709-2074709-2073

709-2072709-2057

709-2068709-2067709-2066709-2063709-2064

MFG. NO.4074148

4900258NTP8004

D-2DC-25

40742830062106407452700621154200215490023040743360610402407429540743354800170006225840745004074337006423444002404043123006213840612570062139006214044001680066394403139240742624400189407355840746774074409407440800121854800173407483340351110031356407441043003004074412420016640614584073179

ITEM1

1A222345678910111213141516171819202122232425262728293031323334353637383940414243

DESCRIPTIONTip Cap

Elbow Assembly KitUse Standard Tip Or Disc Core

D-2 Orifice DiscDC-25 Brass Core

Nozzle ScreenO-RingElbowO-RingO-Plug

Spray WandCap

Gun Rep. KitLever PinGun Lever

Shut-Off Assy.GasketClamp

Cap ScrewDischarge Hose

Pressure CylinderStop Plate

O-RingValve Plate

O-RingO-Ring

Cylinder AssemblyLarge Clamp

PinLever

Viton Collar UsePiston

Protection CapCon. Rod

Con. Rod StudBolt

Lever W/GripStrap HookPump Shaft

WasherBushing

Carry Strap W/ HookStrap BuckleFilter Basket

GasketTank Lid

REPAIR KIT - ACCESSORIESPART NO.709-2062

709-2095709-2097709-2096

MFG. NO.0610407K

0610411K4900207

Not Available

DESCRIPTIONPiston Repair Kit

(6, 20, 21, 22 28, 31, 32)Wand Repair Kit (1, 4, 6, 10, 14, 15, 16)

Adjustable Cone Nozzle Brass 4, 6, 14, 28, 42


455

PUM

PS & SPR

AYE

QU

IPME

NT

ROLLER PUMPSWITH SUPER ROLLERS4 ROLLER

SERIES 4101 ROLLER PUMPS ARE DESIGNED FOR DIRECT DRIVE OR FOR BELT-AND-PULLEY DRIVE WITH EITHERELECTRIC MOTORS OR GAS ENGINES. OPERATES AT SPEEDS UP TO 2600 RPM. POLYPROPYLENE ROLLERSOUTPUT: 7GPM AT 2600 RPM 25 PSIMAXIMUM PRESSURE: 150 PSISHAFT: 5/8"PORTS: 3/4" NPT

6 ROLLER REVERSE ROTATION PUMPSERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM. OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5REVERSE ROTATION ROLLER PUMP

PART NO. MATERIAL WEIGHT712-379 CAST 9 LBS.

4101C

CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROL CHEMI-CALS, FUMIGANTS, ETC.


CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROL CHEMI-CALS, FUMIGANTS, ETC.

6500CR

SERIES 6500 PUMPS ARE EXTREMELY VERSATILE DESPITE THEIR LOW COST. THEY HAVE SEALED BEARINGS ANDARE ADAPTABLE TO BOTH 540 AND 1000 RPM PTO SHAFTS. OPERATE AT SPEEDS UP TO 1200 RPM.OUTPUT: 7.4GPM AT 540 RPM, 50 PSI, 15 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSISHAFT: 5/8"PORTS: 3/4" NPTHORSEPOWER: .15 TO 4.5


6 ROLLER

CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER, WEEDCONTROL CHEMICALS, PEST CONTROLCHEMICALS, FUMIGANTS, ETC.

6500CT3

7 ROLLER

7700CT3

CAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.

SEE PARTS LIST ON NEXT PAGE

7 ROLLER REVERSE ROTATION PUMPSERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3


7700CR

CAST IRON HYPRO PUMPS ARE USED FOR PUMPINGLARGE QUANTITIES OF WATER, WEED CONTROLCHEMICALS, PEST CONTROL CHEMICALS, FUMIGANTS,ETC.

Hypro Roller Pumps w/Super Rollers

SERIES 7700 ROLLER PUMPS, WITH SCOOPLESS ROTOR DESIGN AND EXTRA WIDE ROLLER SLOTS HAVE PLENTYOF CAPACITY FOR JET AGITATION. FOR 540-RPM PTO SHAFTS.OUTPUT: 12.9 GPM AT 540 RPM, 50 PSIMAXIMUM PRESSURE: 200 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .11 TO 3.3


456


PUM

PS &

SPR

AYE

QU

IPM

EN

THypro Roller PumpsHypro Roller Pump Repairs

ROLLER PUMPS8 ROLLERSERIES 7560 EIGHT-ROLLER PUMP, WITH SCOOPLESS ROTOR AND IMPROVED PERFORMANCE AT ALL SPRAYINGPRESSURES, HAS LONG BEEN PREFERRED BY MANY MANUFACTURERS OF FIELD SPRAYERS. USABLE AT SPEEDS UP TO 1000 RPM.OUTPUT: 11.4 GPM AT 540 RPM, 50 PSI,

22 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE:300 PSISHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .25 TO 6

PART NO. MFG. NO. MATERIAL WEIGHT712-401 7560CT3 CAST 14 LBS.712-402 7560CT3 NI-RESIST 14 LBS.712-415 7560XL SILVER CAST 13 LBS.

7560CT3

CAST IRON HYPRO PUMPS ARE USED FOR PUMPING LARGEQUANTITIES OF WATER, WEED CONTROL CHEMICALS, PEST CON-TROL CHEMICALS, FUMIGANTS, ETC.NI-RESIST IS A HIGH NICKELCONTENT ALLOY FOR BETTER CORROSION RESISTANCE TO PUMPCHEMICALS SUCH AS LIQUID FERTILIZERS.SILVER SERIES HAS ACUSTOM ALLOY THAT PROVIDES THE BEST CORROSION RESIS-TANCE FOR UP TO 10 TIMES LONGER LIFE THAN STANDARD CASTIRON PUMPS AND IS READY FOR ROUNDUP.

8 ROLLER REVERSE ROTATION PUMPSERIES 7560 EIGHT-ROLLER PUMP, WITH SCOOPLESS ROTOR AND IMPROVED PERFORMANCE AT ALL SPRAYINGPRESSURES, HAS LONG BEEN PREFERRED BY MANY MANUFACTURERS OF FIELD SPRAYERS. USABLE AT SPEEDS UP TO 1000 RPM. OUTPUT: 11.4 GPM AT 540 RPM, 50 PSI, 22 GPM AT 1000 RPM, 50 PSI.MAXIMUM PRESSURE: 300 PSI SHAFT: 15/16"PORTS: 3/4" NPTHORSEPOWER: .25 TO 6REVERSE ROTATION ROLLER PUMP

PART NO. MATERIAL WEIGHT712-406 Cast 14LBS.

CAST IRON HYPRO PUMPS ARE USED FORPUMPING LARGE QUANTITIES OF WATER,WEED CONTROL CHEMICALS, PEST CONTROLCHEMICALS, FUMIGANTS, ETC.

7560CR

PART NO.

712-1231712-1232

712-1001712-1004

712-1714712-1728

712-2101712-2102712-2103

712-2001712-2004

712-3401712-3403712-3409712-3423

712-3411712-3421712-3422712-3434

HYPRO NO.

0550-66000550-7400

1002-0004 Polly Rollers1005-0004 Super Roller

1720-00141720-0008

2102-0001 Rubber2112-0001 Rubber2112-0003 Viton

2008-00012000-0004

3430-03753430-03763430-03853430-0155

3430-03903430-03803430-01673430-0384

HYPRO ROLLER PUMP REPAIRSPUMP MODEL

4101, 65007560, 7700

6500, 7560, 77006500, 7560, 7700

7560, 77006500

4101, 65007560, 77007560, 7700

7560, 77004101, 6500

6500 Series7560 Series7700 Series7700 Series

4001, 4101 Series6500 Series7560 Series7700 Series

SHAFTS

ROLLERS

O-RING GASKETS

SHAFT SEALS

SEALED BEARINGS

REPAIR KITS (with Rollers & O-Ring)

REPAIR KITS (with Rollers, O-Ring & Viton Shaft Seals)


457

PUM

PS & SPR

AYE

QU

IPME

NT

SERIES 5200 BIG TWIN PUMPOUTPUT TO 10 GPM - PRESSURES TO 400 PSI - SPEEDS TO 600 RPM.

Series 5200 two-cylinder pumps are similar in design to the series 5300. They have the vol-ume and high pressure needed for efficient spraying or cleaning operations - equipmentcleaning, animal pen washing, cattle spraying, orchard spraying - and are built to handle awide range of suspensions and solutions - wettable powder slurries, insecticides, oil, water,and detergent solutions. Maximum 800 RPM, 10 GPM, 400 PSI.

Shaft: Choice of a 1-3/8" hollow shaft for direct mounting on a tractor pto shaft, or a 1"solid shaft for belt and pulley or flexible coupling drive. Ports: 3/4" NPT.

PISTON & PLUNGER PUMPS

Economical 2-cylinder pump for pressure up to 500 PSI. 3 gpm output with leather piston cups.Pump has solid stainless steel 5/8" shaft, factory-lubricated ball bearings for main shaft, needlebearings on the crank pin; unitized stainless steel valves, 1/2" NPT ports. Maximum 1800 RPM.

SERIES 5300 SMALL TWIN PUMP

SHAFT1" Solid

1 3/8" Hollow

WEIGHT18 lbs.18 lbs.

PART NO.712-130712-132

MFG NO.5210C

5210C-H

SHAFT5/8" Solid

WEIGHT

10 lbs.

PART NO.712-195

MFG NO.5330CX

SERIES 5300 PLUNGER PUMP

SHAFT5/8" Solid

5/8" Hollow

WEIGHt10 lbs.10 lbs.

PART NO.712-190712-191

MFG NO.5321C

5321C-H

Designed for high pressure spraying. This model includes a steel base with a mounting height that fitsa 56 frame motor. It can be direct driven at motor speeds (up to 1800 RPM) and requires only 1.5 HPto produce a maximum Pressure of 1000 PSI and 2.2 GPM. 1/2" NPT female ports. Shipping weight 10 lbs

SEE FOLLOWING PAGES FOR COMPLETE PARTS LISTING AND BREAKDOWNS.

HYPRO REPAIR PARTS

PART NO.712-5308

HYPRO NO.3430-0144

PUMP SERIES5321

DESCRIPTIONPlunger Stack Parts Kit

PART NO.712-5302712-5301712-3408712-5201712-5202712-3410712-3407712-5307712-1401

HYPRO NO.3430-00093430-01973430-00373430-00393430-01893430-00383430-00073400-00731440-0005

PUMP SERIES533053305210521052105210530053005200

DESCRIPTIONPiston Stack Parts Rubber Cup Kit

Valve AssemblyPiston Stack Parts Leather Cup KitPiston Stack Parts Fabric Cup KitPiston Stack Parts Buna-A Cup Kit

Valve AssemblyRepair Kit

Valve Set AssemblyPiston Guide

Repair Parts for Hypro Plunger Pumps

Repair Parts for Hypro Piston Pumps

Hypro Piston & Plunger PumpsHypro Repair Parts

458


PUM

PS &

SPR

AYE

QU

IPM

EN

TRepair Parts for Hypro Model 5210

REPAIR PARTS FOR HYPRO MODEL 5210


459

PUM

PS & SPR

AYE

QU

IPME

NT


Repair Parts for Hypro Model 5330

460


PUM

PS &

SPR

AYE

QU

IPM

EN




461

PUM

PS & SPR

AYE

QU

IPME

NT

OUTPUT TO 76 GPM - PRESSURE TO 70 PSI-SPEEDTO 1000 RPM - TEMPERATURE TO 140° F.

EASY TO MOUNT ON TRACTOR OR TRAILER,SERIES 9400 DELIVERS DEPENDABLE HIGH VOLUME ATA LOW PRICE. EASY TO ADJUSTANDMAINTAIN.

CONSTRUCTION: EPOXY-COATED CAST-IRON HOUSING WITH STAINLESS STEELWEAR RING, MAKING THE PUMP""RReeaaddyy ffoorr RRoouunndd--UUpp"". IT HAS A 3/16 STAINLESSSTEEL SHAFT, BALANCED GLASSFILLED NYLONIMPELLER. SINGLE, POSITIVE TIMING BELT ISADJUSTED OR REPLACED BY LOOSENING ONEBOLT; NO NEED TO DISTURB THE PTOATTACHMENT. BELT-GUARD ASSEMBLY IS MOLDED FROM HIGH IMPACT, LONG LASTINGGLASS REINFORCED POLYETHENE. FACTORY-LUBRICATED BALL BEARINGS. VITONSHAFT SEAL STANDARD; BUNA-N OPTIONAL

SERIES 9400 BELT DRIVE PUMPS

SEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING AND BREAKDOWNS.

""RReeaaddyy ffoorr RRoouunndd--UUpp""

HYPRO NO.2120-00093103-00093103-00103100-00063100-0005

DESCRIPTIONViton Pump Seal

Belt for 600 RPM 9401C-B1Belt for 1000 RPM 9401C-B2

V-Belt for 540 RPM 9402V-Belt for 1000 RPM 9402

PART NO.712-2106712-3101712-3102712-3106712-3105

Repair Parts for Hypro 9400 Series Pump

600 RPM DRIVE9402C-540: 1 3/8" PTO, 6 SPLINE

SHAFT FOR 600 RPM66 GPM AT 40 PSI

PART NO. 712-679

1000 RPM DRIVE9402C-1000: 1 3/8" PTO, 21 SPLINE

SHAFT FOR1000 RPM75 GPM AT 40 PSI

PART NO.712-680

Hypro Series 9400 Belt Drive PumpsRepair Parts for Hypro 9400 Series Pump

You can find all these itemsand more on our web site:

www.modernusa.com

Make Modern Ag PartsYour #1 choice!

462


PUM

PS &

SPR

AYE

QU

IPM

EN




463

PUM

PS & SPR

AYE

QU

IPME

NT

Get ready to use these powerful pumps again and again for all standard centrifugal pump applications. You'll always be assured maximum performance because of Hypro's new, exclusive,stainless steel wear ring. The ring is inserted in a critical area of every Hypro cast iron centrifugalpump casting. Roundup® herbicide remains popular, and Hypro's ""RReeaaddyy ffoorr RRoouunndduupp"" wear ringbroadens the capabilities for all Hypro 9000 series cast iron centrifugal pumps.

Get ready! This wear ring comes standard on Hypro's entire line of cast iron centrifugal pumps. Thewear ring keeps the Hypro centrifugal line in front of the competition. so get ready!


Series 9000C-0Features:

• Planetary Oil Bath Gear Drive• Max. Flow: 110-117 gpm• Max. Pressure: 75 psi• Max. Speed: 1000 rpm

(540 and 1000 rpm PTO)• Shafts: 1” Solid, 1 3/8” Hollow, 1 3/4” Hollow• Port Sizes: 1 1/2” NPT Inlet

1 1/4” NPT Outlet• Max. Fluid Temperature: 140½F• Housing: Cast Iron• Impeller: Glass-Filled Nylon• Pump Shaft Rotation: CCW*• Weight: 35 lbs./15.24 kg• Shaft Seals: Viton Standard (Buna-N and Silicon Carbide Available)

""RReeaaddyy ffoorr RRoouunndd--UUpp""

PART NO.712-601712-602

DESCRIPTION9006C-0 Gear Driven Centrifugal Pump 540RPM

9008C-0 Gear Driven Centrifugal Pump 1000RPM

CAST IRON CENTRIFUGAL PUMPS

Hypro Cast Iron Centrifugal Pumps

464


PUM

PS &

SPR

AYE

QU

IPM

EN

TParts Breakdown for 712-601, 602

SHAFT ASSEMBLY 1000 RPM

SHAFT ASSEMBLY 540 RPM

CATNO.

QNTY.REQ'D.

41111111411*

11336333**

1111

REF. NO.

12345567891112

13141516171819

19A20

2121A2223

MFGNO.

2406-00070150-9000C2253-0001

0400-9000P2120-00102120-00111720-0083

0752-9000C2210-00201700-01012130-00181810-0013

2008-00011820-00252210-00462270-00032265-00032007-00223900-00393900-00401610-0012

3900-00100500-90023900-00131810-0011

DESCRIPTIONDrain PlugPump CasingImpeller NutImpeller (Nylon)Mechanical Seal (Optional Buna-N)Mechanical Seal (Standard Viton)O-ringMounting Flange AdapterHex Head CapscrewGasketBearing Lip SealRetaining Ring - (1) required for 540 rpm(2) for 1 3/8" and (3) for 1 3/4" 1000rpmBall BearingRetaining RingCapscewWasherThrust WasherBearing Inner RaceDriver Gear w/Bearing (540 rpm)Driver Gear w/Bearing (1000 rpm)Woodruff Key**(1) req'd for 540 rpm(2) req'd for 1000 rpm modelsImpeller Shaft/Pinion Gear (540 rpm)Impeller Shaft (1000 rpm)Sun Gear (1000 rpm)Retaining Ring (1000 rpm)

CATNO.

QNTY.REQ'D.

111111111111118411113111111

REF. NO.24

24A2526

26A2728293031323334353637383940414344454647

PART NO.

0562-9000D0562-9002D3430-0176

0501-9016D0501-9018D0610-00052220-00352403-0012

0501-9018D11800-00142005-00022102-00251810-00013900-00091450-00042210-0026

0754-9000C0550-1322F4

3430-01902404-01932406-00191700-00981720-01391720-00221520-0034

6031-0318

DESCRIPTIONDriver Hub (models 9000C, 9006C)Driver Hub (models 9002C, 9008C)Locking Collar Kit (Hollow ShaftOnly)Driver Hub (models 9010C, 9016C)Driver Hub (models 9012C and 9018C)KeyCapscrew (9022C, 9028C)Bushing (models 9022C, 9028C)Driver Hub (models 9022C, 9028C)Retaining RingBall BearingOil SealRetaining RingRing GearCushion BumperHex Head CapscrewGear CasingDriver Hub (9022C, 9028C)Locking Collar Kit (9022C, 9028C)Breather VentOil PlugGasketO-ringO-ringMounting ClipNameplate (not shown)WARNING Tag (not shown)

SEAL, O-RING REPAIR KIT NO. 3430-0333 CONSISTS OF (1) REF. 5 MECHANICAL SEAL, (1) REF. 6 O-RING, AND (1) REF. 9 GASKET. GEAR LUBE REQUIREMENT: PHILLUBE SAE 80W90 OIL.

PARTS BREAKDOWN FOR 712-601, 602HYPRO CAST IRON CENTRIFUGAL PUMPS


465

PUM

PS & SPR

AYE

QU

IPME

NT

HYPRO SERIES 9600C TURBINE PUMP1000 RPM PTO DRIVE. THE 9600C TURBINE PUMPIS FOR HIGH VOLUME SPRAYING. FEATURESINCLUDE: HEAVY DUTY CAST IRON BODY, GLASSFILLED VALOX IMPELLER, STAINLESS STEELSHAFT, VITON SEALS, AND HEAVY DUTY SEALEDBEARINGS. AT 1200 RPM AND 40 PSI THE PUMPDELIVERS 73 GPM.

9600C

SHAFT SIZE: 15/16" WITH 1/4" KEYWAYPORT SIZE: 1 1/2"

REPAIR PARTS FOR HYPRO SERIES 9600C TURBINE PUMP

REF. NO.

1234

56789

101112131415

Qty.

1111

11131221611

PART NO.

0050-9600 C0250-9600 C1201-00150500-9600

0400-9600P1610-00451710-00151810-00081820-00252008-00012112-00032300-00202210-00262406-00076031-0258

DESCRIPTION

Body HousingImpeller InsertShaft, Stainless Stell, 15/16" Diameter, 1/4" KeywayImpeller, Corrosion Resistant Valox®Key-WoodruffGasketRetainer Ring - ExternalRetainer Ring - InternalSealed Ball BearingSeal - VitonBearing CoverScrew, Hex HeadPipe PlugDecal

PART NO.712-2001712-2103712-3425

DESCRIPTIONSealed Bearing

Shaft SealSeal Kit Contains: 1) 1710-0015 Gasket

2) 2112-0003 Viton Seals

HYPRO NO.2008-0001

2112-0003 Viton3430-0347

REPAIR PARTS FOR HYPRO TURBINE PUMP MODEL 9600C

PART NO.

712-696

Hypro Series 9600C Turbine PumpRepair Parts for Hypro Turbine Pump Model 9600CRepair Parts for Hypro Series 9600C Turbine Pump

466


PUM

PS &

SPR

AYE

QU

IPM

EN

THypro Hydraulic Drive Pump

HYPRO HYDRAULIC DRIVE PUMPHypro centrifugal pumps are designed for agricultural and industrial spraying and transfer ofa variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertiliz-ers, etc. Polypropylene centrifugal pumps can also be used to pump acid fertilizer, calciumchloride and other highly corrosive liquids such as sulfuric and phosphoric acids. HyproSeries 9300 hydraulic motor driven centrifugal pumps provide smooth performance. Theycan be conveniently mounted on the tractor or sprayer, becoming part of the vehicle'shydraulic system and freeing the PTO for other uses. The Hypro "close coupled" designreduces the mounting space required, eliminating long shafts and couplers between thepump and motor.

PART NO. MATERIAL OEM#712-690 Cast 9303C-HM4

7 gpm hydraulic motor/cast iron pump, closed/open center system, ports (NPT): 1-1/2" inlet, 1-1/4" outlet.


• Stainless Steal Wear Ring ""RReeaaddyy ffoorr RRoouunndd--UUpp"" Standard• Cast Iron Hydraulic Motor

- Hypro Makes it's Own Hydraulic Motors• Double Lip Teflon Seal in Motor

- Able to Absorb Hydraulic Shock• One Piece Friction Welded Stainless Steel Shaft Standard

- 316 Stainless Shaft in the Pump- 416 Stainless Shaft in the Motor

• Balanced, Glass-filled Nylon Impeller Standard- Corrosion Resistant

• Viton Seal Standard• Easy Hook-Ups with No Relief Valves• OEM Standard on Most Sprayers• Flows to 190 gpm• Pressures to 190 psi

Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and shipped it to youthe same day.

Your Satisfaction is Guaranteed!


467

PUM

PS & SPR

AYE

QU

IPME

NT

REPAIR PARTS FOR HYPRO HYDRAULIC DRIVE PUMP

Repair Parts for Hypro Hydraulic Drive Pump

468


PUM

PS &

SPR

AYE

QU

IPM

EN

THypro Pump Couplers

MOUNTS TO PUMP SHAFT AND PTOSHAFT WITH FLUSH ALLEN HEADSETSCREWS.

FORGED STEEL PUMP ADAPTERS

SLIPS PUMP ON AND OFF PTO SHAFT IN SECONDS WITH NO TOOLSREQUIRED. SAFE, CONVENIENT AND SECURE. NO PROTRUDING PINSOR BOLTS TO CATCH HANDS OR CLOTHING.

MOUNTS TO PUMP SHAFT ANDPTO SHAFT WITH FLUSH ALLENHEAD SETSCREWS.

FOR USE WITH GASOLINE ENGINES AND ELECTRIC MOTORS UP TO TWO HORSEPOWER

PART NO.712-2702712-2703712-2701

DESCRIPTION1/2" Coupling End 1/8" Key

5/8" Coupling End 3/16" KeyCenter Disc

MFG. NO.2738-00012738-00022738-0001

PART NO.712-1306712-1307712-1308712-1309

SPLINE1-3/8" X 61-3/8" X 6

1-3/8" X 211-3/8" X 21

SHAFT SIZE5/8"

15/16"5/8"

15/16"

MFG. NO.1321-00061321-00071321-00081321-0009

PART NO.712-1322712-1333712-1353712-1338

SPLINE1-3/8" X 61-3/8" X 6

1-3/8" X 211-3/8" X 21

SHAFT SIZE5/8"

15/16"5/8"

15/16"

MFG. NO.1320-00221320-00331320-00531320-0038

PART NO.712-1370712-1372712-1374712-1375

SPLINE1-3/8" X 6

1-3/8" X 211-3/4" X 201-3/8" X 6

SHAFT SIZE15/16"15/16"15/16"

1"

MFG. NO.1320-00761320-00781320-00801320-0081

FLEXIBLE COUPLINGS (LOVE JOY COUPLINGS)

COUPLING END CENTER COUPLING END DISC

STANDARD ADAPTERS

QUICK COUPLER ADAPTERS

HYPRO PUMP COUPLERS


469

PUM

PS & SPR

AYE

QU

IPME

NT

HYDRAULIC MOTOR DRIVEN PUMPS

MODELS 204 AND 210

60GPM

30 PSI25 PSI15 PSI

45GPM

55 PSI45 PSI35 PSI

30GPM

83 PSI70 PSI50 PSI

15GPM

95 PSI75 PSI55 PSI

SHUT-OFF0 GPM100 PSI80 PSI60 PSI

75GPM

10 PSI5 PSI

- -

MAXIMUM PRESSURE: 100 PSIMAXIMUM FLOW: 75 GPM

1 1/4" SUCTION X 1" DISCHARGE

SEE COMPLETE PARTS BREAKDOWN ON FOLLOWING PAGES.

PART NO.711-1101711-1107711-1102711-1108

PART NO.711-1407711-4371711-1106711-4370711-4375

MFG. NO. / DESCRIPTIONFMC - HYD - 204 PUMPFMC - HYD - 204 CI PUMP WITH CAST IRON IMPELLERFMC - HYD - 210 PUMPFMC - HYD - 210 CI PUMP WITH CAST IRON IMPELLERREPAIR KITS FOR 204 AND 210MFG. NO. DESCRIPTIONRK-FMC - 52700 REPAIR KIT FOR PUMP ONLYRK-BAC - 75 - HYD HYDRAULIC MOTOR 204/210 REPAIR KITFMC-HYD-PO PUMP ONLYBAC-75-HYD-204 204 HYDRAULIC MOTORBAC-75-HYD-210 210 HYDRAULIC MOTOR

• THE ORIGINAL FARM AND INDUSTRY STANDARD. OVER 250,000 IN USE SINCE 1969.

• THE 204 MOTOR REQUIRES 4 GPM HYDRAULIC FLUID INPUT.RECOMMENDED FOR:

-JOHN DEERE TYPE PRESSURE COMPENSATING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 4 TO 13 GPM.

• THE 210 MOTOR REQUIRES 8 GPM HYDRAULIC FLUID INPUT.RECOMMENDED FOR:

-CASE-IH TYPE LOAD SENSING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 8 TO 17 GPM.

Ace Hydraulic Motor Driven Pumps-Models 204 and 210

470


PUM

PS &

SPR

AYE

QU

IPM

EN

TCentrifugal/Hydraulic Motor Combinations Parts List

CENTRIFUGAL PUMP/HYDRAULIC MOTOR COMBINATIONS PARTS LISTMODELS FMC-HYD-204, FMC-HYD-210 & FMC-HYD-310

WITH MECHANICAL SEAL, 1 1/4" X 1" SERIES

PART NO.711-3010711-3060711-3061711-3110711-3151711-3160711-3250711-4005711-3300

711-3391711-3400711-3420711-3440711-3442711-3790

711-3810711-3870

711-4130

711-4370711-4375

711-4380711-4390711-4400711-4410

711-5010711-5030

PARTS LISTING CONTINUED NEXT PAGE

REF.NO.

12233#4-556789910111213141415151617171718181819############

MFG.NO.*BAC-4BAC-6-HYDBAC-6-HYD-SSBAC-7B*BAC-7V*40160BAC-12BAC-12ABAC-14-HYDBAC-14-HYD-310BACH-23-SSBAC-24-HYD-SSBACH-25BAC-26-HYDBAC-26-HYD-CIBAC-32BAC-32SBAC-33BAC-3740950409304111041120BAC-54412564125741330BAC-75-HYD-204BAC-75-HYD-210BAC-75-HYD-310BAC-76-HYDBAC-79-204-3/8"NPTBAC-79-204-1/2"NPTBAC-79-204-3/4"ORBBAC-79-210-3/8"NPTBAC-79-210-1/2"NPTBAC-79-210-3/4"ORBBAC-80-HYD-1/2"NPTBAC-80-HYD-3/4"ORBBAC-80-HYD-7/8"ORB402104203042040

REQ.

1111111111111112122443314441111111111111111

EDP NO.40010400604006140110401514016040250400054030040301403904040040420404404044240790407954081040870409504093041110411204113041256412574133041370413754137841380413904140041410413954140541415414204143041440420104203042040

DESCRIPTION

Gasket, 4 Hole5/8" Driven Shaft W/Tang Slot5/8" Driven Shaft W/Tang Slot, Stainless SteelBuna N. Mechanical Seal (Optional)Viton Mechanical Seal“O” Ring For Bac-6-Hyd Shaft1 1/4" X 1" Volute"O" Ring for for Bac-14 VoluteMounting FrameMounting Frame, For Bac-75-Hyd-310 Hydraulic Motor3/8" N.F. Hex Nut, Stainless Steel3/8" Washer, Stainless Steel1/8" X 1/8" X 1/2" Impeller KeyImpeller, Valox, W/KeywayImpeller, Cast Iron, W/Keyway (Optional)External Snap Ring, Bac-6-Hyd Driven ShaftSpacer For Bac-6-Hyd ShaftInternal Snap Ring, Bac-14-Hyd Mounting FrameSealed Ball Bearing, Bac-6-Hyd Driven Shaft3/8" N.C. X 3/4" Hex Head Cap Screw3/8" N.C. X 3/4" Hex Head Cap Screw, Stainless Steel (Optional)1/8" Npt Pipe Plug1/8" Npt Pipe Plug, Stainless Steel (Optional)Slinger5/16" N.C. X 3 1/2" Hex Head Cap Screw Motor To Pump (For Fmc-Hyd-204)5/16" N.C. X 4" Hex Head Cap Screw Motor To Pump ( For Fmc-Hyd-210)5/16" N.C. X 3/4" Hex Head Cap Screw Motor To Pump ( For Fmc-Hyd-310)Hydraulic Motor For Open Center Or Closed Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-204)Hydraulic Motor For Open Center Or Closed Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-210)Hydraulic Motor For Open Center Systems With Integral Needle Valve ( For Model Fmc-Hyd-310)Coupling For Hydraulic MotorRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/8" Npt FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 1/2" Npt Female (Opt.)Restricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/8" Npt FemaleRestricter Orifice For Closed Center Systems, 3/8" Npt Male X 1/2" Npt Female (Opt.)Restricter Orifice For Closed Center Systems, 3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal Female (Optional)3/8" Npt Male X 1/2" Npt Female Adapter ( Optional)3/8" Npt Male X 3/4" -16 Nf “O” Ring Seal Female Adapter ( Optional)3/8" Npt Male X 7/8" -14 Nf “O” Ring Seal Female Adapter (Optional)Needle Valve Adjusting Screw3/8" Nc Thread SealFlat Steel Back-Up Washer


471

PUM

PS & SPR

AYE

QU

IPME

NT

REF. #1234567891011121314*15*16*17*181920212223242526272829*3031323334*

MODEL - 20441720417314174041750417614177041780417904180041810418204183041840418504186041870418804189041900419204194141950419614197041980419904201040960420304204042041420424204342044

MODEL - 20641721417314174041751417644177041780417904180541810418204183041840418504186041870418804189041900419214194141950419614197141980419904201040960420304204042041420424204342044

MODEL - 21041725417314174041755417664177041780417904180541810418204183041840418504186041870418804189041905419254194141950419614197541980419904201040960420304204042041420424204342044

DESCRIPTIONHousingDrive PlateEnd PlateGearStraight drive shaftSteel seal retainerSpring for reverse flow checkCheck valve capDowel pin for housingSteel backup washerNylon washerWire ring bearing spacerQuad ring shaft seal collar"O" Ring, housing seal"O" Ring, seal retainer"O" Ring, seal collarQuad ring shaft sealShaft seal retaining ring1/4"N.C. Hex head cap screwDowel Pin for drive shaftSnap ringBallBall Bearing 7/16"1 D.Idler ShaftRetaining ringBall for idler shaftNeedle valve adjusting screw3/8" N.C. Jam nut#7500 3/8" N.C. Thread sealFlat steel back-up washerSeal check capSpring for seal checkBall for seal check"O" Ring for seal check cap

REQ.1112111121111211112121112111111111

HYDRAULIC MOTOR PARTS LIST

Hydraulic Motor Parts List

472


PUM

PS &

SPR

AYE

QU

IPM

EN

THigh Performance Hydraulic Motor Driven Pump Model 206Parts Breakdown for 711-1104

* Items Included In 711-1425 repalr kit. # Not shown on cross section drawlng

MFG. NO.BAC -4- 150BAC-6-HYDBAC-6-HYD-SSBAC-7BBAC-7VBAC-7SC40160BAC-12-150BAC-14-150-HYDBACH-23-SSBAC-24-HYD-SSBAC H -25BAC-26-150BAC -32BAC -33BAC-3740950409304111041120BAC-5441258BAC-75-HYD-206

BAC-76-HYD

EDPNO.4001540060400614011040151401524016040255403054039140400404201044540790408104087040950409304111041120411304125841372

41380

REQ.

11111

11111112224433141

1

PARTNO.711-3015711-3060711-3061711-3110711-3151

711-3160

711-3391711-3400711-3420

711-3990711-3810

711-4130

711-4380

DESCRIPTION

O" Ring, volute5/8" Driven shaft with tang slot5/8" Driven shaft with tang slot. stainless steel (optional)Buna-N mechanical seal (optional)Viton mechanical seal (includes 40160 "O'' ring)Silicon carbide mechanical seal (includes 40160 "O'' ring) (optional)"O" Ring for BAC-6-HYD shaft11/2" X 11/4" VoluteMounting frame3/8" N.F. Hex nut, stainless steel3/8" Lock washer, stainless steel1/8" X 1/8" X 1/2" Impeller keyImpeller, w/keywayExternal snap ring, BAC-6-HYD driven shaftInternal snap ring, BAC-14-HYD-150 mounting frameSealed ball bearing, BAC-6-HYD driven shaft3/8" N.C. X 3/4" Hex head cap screw3/8" N C. X 3/4" Hex head cap screw, stainless steel (optional)1/8" NPT Pipe plug1/8" NPT Pipe plug, stainless steel (optional)Slinger5/16" N.C X 33/4" Hex head cap screw motor to pump (for FMC-150-HYD-206)Hydraulic motor for open-center or closed-center systems wlth integral needlevalve (for Model FMC-150-HYD-206)Coupling for hydraulic motor

REF.NO.*122#

*3#

*#456789

10111213131414151617

18

PARTS BREAKDOWN FOR 711-1104CENTRIFUGAL PUMP/HYDRAULIC MOTOR

COMBINATION PARTS LIST MODEL FMC-150-HYD-206

MODEL 2061 1/2" SUCTION X 1 1/4" DISCHARGEHIGH PERFORMANCE PUMP - 100 PSI AT 20 GPM.PROVIDES HIGHER PRESSURE AND GREATER VOLUME FOR APPLICATIONS

WITH LARGE TANKS AND LONG BOOMS.THE 206 MOTOR REQUIRES 7 GPM HYDRAULIC FLUID INPUT AND FITS

VIRTUALLY ALL TRACTOR HYDRAULIC SYSTEMS.VITON MECHANICAL SEAL.RECOMMENDED FOR THE FOLLOWING HYDRAULIC SYSTEMS:

-JOHN DEERE TYPE PRESSURE COMPENSATING CLOSED CENTER SYSTEMS.

-CASE-IH TYPE LOAD SENSING CLOSED CENTER SYSTEMS.-OPEN CENTER SYSTEMS WITH CAPACITIES FROM 7 TO 16 GPM.

100GPM

10 PSI5 PSI

- -- -

60GPM

60 PSI52 PSI45 PSI25 PSI

40GPM


20GPM


SHUT-OFF0 GPM

120 GPM100 PSI80 PSI60 PSI

80GPM


MFG. NO. / DESCRIPTIONFMC-150-HYD - 206 PUMPREPAIR KITSRKBAC-75-HYD ALL SEALS AND O-RINGS FOR MOTORRK-FMC-52710 REPAIR KIT FOR 206 PUMP

PART NO.711-1104

711-4371711-1425

150 SERIESHIGH PERFORMANCE

150 SERIESHIGH PERFORMANCE

HIGH PERFORMANCE HYDRAULIC MOTOR DRIVEN PUMP


473

PUM

PS & SPR

AYE

QU

IPME

NT

TRACTORPTO SPEED

PSI203040506070

450RPMGPM

504430

500RPMGPM

53504022

540RPMGPM

5752483715

600RPMGPM

656362604625

PTOC - 600TRACTOR

PTO SPEEDPSI203040506070

700RPMGPM

443824

800RPMGPM

50473719

900RPMGPM

5752483715

1000RPMGPM

656362604625

PTOC - 1000

REPAIR KITS CONTAIN BELT, VITON SEAL, GASKET, AND O-RING

SEE PARTS BREAKDOWN ON NEXT PAGE.

Pressure10 PSI30 PSI50 PSI90 PSI (1)100 PSI (1)

Capacity75 GPM 4,500 GPH60 GPM 3,600 GPH50 GPM 3,000 GPH20 GPM 1,200 GPH10 GPM 600 GPH

Models FMC-HYD-204, FMC-HYD-210, FMCL-HYD-204, FMCL-HYD-2101-1/4" X 1" SERIES

Pressure10 PSI30 PSI50 PSI90 PSI100 PSI

Capacity60 GPM 3,600 GPH60 GPM 3,600 GPH60 GPM 3,600 GPH40 GPM 2,400 GPH20 GPM 1,200 GPH

Model FMCH-HYD-210

PART NO.711-1001711-1007711-1008711-1055

PART NO.711-1401

711-1402

MFG. NO.PTOC-600-6PTOC-1000-10-21PTOC-1000-20FMC - MIAREPAIR KITSRK-PTOC-600-10

RK-PTOC-1000-10

DESCRIPTION6-SPLINE PUMP21-SPLINE PUMP20-SPLINE PUMPREPLACEMENT PUMP UNIT ONLYDESCRIPTIONFOR 1 3/8"-6-SPLINE PUMP

FOR 1 3/8"-21-SPLINE PUMPFOR 1 3/4"-20-SPLINE PUMP

The original farm belt drive standard.Over 325,000 in use since 1964.Time proven design. Wide spread parts and service availability.Most economical belt drive.0-70 PSI. 1 1/4" Suction X 1" Discharge.Sealed bearings, Mechanical viton seals.Saftey shield included.

BELT DRIVEN PUMPS

Belt Driven Pumps

1 1/4" SUCTION X 1" DISCHARGE

★

★

★

★

★

★

★

★

474


PUM

PS &

SPR

AYE

QU

IPM

EN

TParts Lists-Model PTOC Centrifugal Pump

* ITEMS INCLUDED IN REPAIR KIT FOR MODELS PTOC-600-10-6SP.PTOC-600-10-QC AND PTOC-600-10B# ITEMS INCLUDED IN REPAIR KIT FOR MODELS PTOC-1000-10-21SP AND PTOC-1000-175-20SP

MFG NO.#* BAC-4BAC-5BAC-6BAC-6-SSBAC-7B#*BAC-7V#*40160BAC-10-6SPBAC-10-6SP-QC

BAC-10-21SP

BAC-10-175-20SP

BAC-10-SBAC-11BAC-11-175BAC-11-1BAC-12BAC-12ABAC-13BAC-14-MIABAC-15

BAC-15-A-6SPBAC-15-A-QCBAC-15-A-M

BAC-15-A-175

BAC-15-B

BAC-26BAC-26-CI

PART NO.711-3010711-3030711-3050711-3070711-3110711-3151711-3160

711-3220

711-3235

711-3250711-4005711-3270

711-3340

711-3430711-3432

REF. #123344456

7

8

910111213--141516

1717

DESCRIPTIONGASKET, 4 HOLEIDLER TORSION SPRING5/8" DRIVEN SHAFT, LEFT HAND THREAD5/8" DRIVEN SHAFT, LEFT HAND THREAD, STAINLESS STEELBUNA N MECHANICAL SEAL (OPTIONAL)VITON MECHANICAL SEAL"O" RING FOR BAC-6 SHAFT1 3/8" 6 TOOTH SPLINE PTO DRIVE SHAFT ( FOR PTOC-600-10-6SP)1 3/8" 6 TOOTH SPLINE PTO DRIVE SHAFT FOR QUICK COUPLER(FOR PTOC-600-10-QC)1 3/8" 21 TOOTH SPLINE PTO DRIVE SHAFT, INCLUDES BAC-11(FOR PTOC-1000-10-21SP)1 3/4" 20 TOOTH SPLINE PTO DRIVE SHAFT, INCLUDES BAC-11-175 (FOR PTOC-1000-175-20SP)1" TUMBLEROD STUB DRIVE SHAFT (FOR PTOC-600-10B)SPLIT RING, LOCKING COLLAR ( FOR BAC-10-21SP SHAFT)SPLIT RING, LOCKING COLLAR ( FOR BAC-10-175 SHAFT)SET SCREW ( FOR BAC-11- AND BAC-11-175 LOCKING COLLAR)1 1/4" X 1" VOLUTE"O" RING FOR BAC-12 VOLUTEIDLER ARMMOUNTING FRAME, MACHINED FOR IDLER ARMPTO DRIVE SHAFT BEARING HOUSING(FOR PTO MOUNTED MODELS)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY WITH 6 SPLINE SHAFTPTO DRIVE SHAFT BEARING ASSEMBLY ( FOR PTOC-600-10-QC)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY(FOR PTOC-1000-10-21SP)PTO DRIVE SHAFT BEARING HOUSING ASSEMBLY(FOR PTOC-1000-175-20 SP)TUMBLEROD DRIVE SHAFT BEARING HOUSING W/MOUNTING BASE(FOR PTOC-600-10B)IMPELLER, VALOX, LEFT HAND THREADIMPELLER, CAST IRON, LEFT HAND THREAD ( OPTIONAL )

REQ.111111111

1

1

111111111

111

1

1

11

EDP NO.400104003040050400704011040151401604020040210

40220

40180

401904023540236402374025040005402704029040340

403504035240360

40353

40370

4043040432

PARTS LISTMODEL PTOC CENTRIFUGAL

PUMP WITH MECHANICALSEAL TRACTOR PTO

MOUNTED, BELT DRIVEN


475

PUM

PS & SPR

AYE

QU

IPME

NT

MFG. NO.BAC-27-P-10BAC-27-M-10BAC-27-175BAC-28-8BAC-28-8-M*BAC-28-10#BAC-28-10-MBAC-29-10BAC-29-10BAC-30-10BAC-30-10-MBAC-30-175

BAC-31BAC-31-1BAC-32BAC-32-SBAC-33BAC-34BAC-35BAC-36BAC-37BAC 31-1BAC-384095040930BAC-4040960BAC-4240980BAC-44BAC-45BAC-46BAC-47BAC-49BAC-50BAC-51BAC-524111041120BAC-54BAC-55BAC-55-ABAC-57BAC-5841250BAC-6341300BAC-81-QCBAC-81-QC-SBAC-82 QCBAC-83-QCBGKHBGKB

PART NO.

711-3610711-3620711-3680711-3681711-3740

711-3780711-3781711-3790

711-3810

711-3840

711-3870711-3781

711-4130 711-4140

REF. #181818191919192021212121

2222232425262728292930313132333435363738394041424344444546

47

48495051515253

EDP NO.405104050040505405904060040610406204068040681407404075040745

407804078040790407954081040830408404085040870

40900409504093040940409604097040980409904101041020410404107041080410904110041110411204113041140411504118041190412504126041300414504145141460414705261052600

DESCRIPTIONNAME PLATE ( FOR PTOC-600-10)NAME PLATE ( FOR PTOC-1000-10-21SP)NAME PLATE ( FOR PTOC-1000-175-20SP)POLY-V BELT, 8 GROOVE ( FOR PTOC-600) - OBSOLETEPOLY-V BELT, 8 GROOVE ( FOR PTOC-1000) - OBSOLETEPOLY-V-BELT, 10 GROOVE ( FOR PTOC-600-10,600-108)POLY-V BELT. 10 GROOVE ( FOR PTOC-1000-10)1.5" P.D. X 5/8" BORE POLY-V PULLEY, 10 GROOVE1.7" P.D. X 5/8" BORE POLY-V PULLEY, 10 GROOVE10.6" P.D. X 2" BORE POLY-V PULLEY, 10 GROOVE ( FOR PTOC-600-10,600-10B)6.375" P.D. X 2" BORE POLY-V PULLEY, 10 GROOVE ( FOR PTOC-1000-10)6.375" P.D. X 2 3/8" BORE POLY-V PULLEY, 10 GROOVE ( FOR PTOC-1000-175-20SP)SEALED BALL BEARING, BAC-10 DRIVE SHAFTSEALED BALL BEARING, BAC-10 DRIVE SHAFT (7/92 & UP)EXTERNAL SNAP RING, BAC-6 DRIVEN SHAFTSPACER FOR BAC-6 SHAFTINTERNAL SNAP RING, BAC-14 MOUNTING FRAMEINTERNAL SNAP RING, BAC-15 BEARING HOUSINGEXTERNAL SNAP RING, BAC-10 DRIVE SHAFTEXTERNAL SNAP RING, BAC-13 IDLER ARMSEALED BALL BEARING, BAC-6 DRIVEN SHAFTSEALED BALL BEARING, BAC-6 DRIVEN SHAFT (JULY 1992 AND UP)BEARING SPACER, DRIVE SHAFT3/8" N.C. X 3/4" HEX HEAD CAP SCREW3/8" N.C. X 3/4" HEX HEAD CAP SCREW, STAINLESS STEEL3/8" N.C. SLOTTED SET SCREW3/8" N.C. JAM NUT3/8" N.C. X 1 3/4" HEX HEAD CAP SCREW3/8" FLAT WASHER3/8" LOCK WASHER3/8" N.C. HEX NUT5/8" SPACER5/8" N.C. X 2 1/8" HEX HEAD IDLER CAP SCREWRETAINER RING3/16" X 3/16" X 1 1/4" KEY, DRIVEN SHAFT3/8" X 1/2" X 1 1/2" KEY PTO DRIVE SHAFT1/4" COLD SHUT, TORQUE CHAIN ANCHOR1/8" NPT PIPE PLUG1/8" NPT PIPE PLUG, STAINLESS STEEL ( OPTIONAL)SLINGERIDLER BEARING AND OUTER ROLLER ASSEMBLYIDLER ARM AND OUTER ROLLER ASSEMBLY5/16" N.C. X 5/16" ALLEN HEAD SET SCREW FOR BAC-29 PULLEY1/4" ZERK FITTING, IDLER ARM5/16" N.C. X 3 1/4" HEX HEAD CAP SCREW ( FOR PTOC-600-10B)5/16" N.C. SELF LOCKING NUT ( FOR PTOC-600-10B)3/8" N.C. X 5/8" ALLEN HEAD SET SCREW FOR BAC-30 PULLEYSBALL RETAINER SLEEVE FOR QUICK COUPLER, DELRINBALL RETAINER SLEEVE FOR QUICK COUPLER, STEEL ( OPTIONAL)SPRING FOR QUICK COUPLERBALL FOR QUICK COUPLERBELT AND SHAFT GUARD KIT ( FOR PTO MOUNTED CENTRIFUGAL PUMPS)BELT AND SHAFT GUARD KIT ( FOR PTOC-600-10B)

REQ.111111111111

2212211221446622221111113311121112111311

PARTS LISTMODEL PTOC CENTRIFUGAL PUMP WITH MECHANICAL SEAL

TRACTOR PTO MOUNTED, BELT DRIVEN

Parts List Model PTOC Centrifugal Pump

476


PUM

PS &

SPR

AYE

QU

IPM

EN

TPump Torque Bar & ChainMighty Pump

PUMP TORQUE BAR & CHAINPART NO.

703-85MFG. NO.

33680

MIGHTY PUMPSELF PRIMING SUBMERSIBLE PUMP

FREE COUNTER DEMONSTRATOR WITH PURCHASE OF FOUR OR MORE PUMPS. JUST ADD WATER!

TRANSFERS:ANTI-FREEZEDIESELWATERMANY OTHER LIQUIDS

STATE OF ART GERMAN ENGINEERING.SOLID BRASS SHAFT TO HANDLE SALT WATER.COMPLETE WITH 3' OF 3/8" HOSE AND POWER WIRE.6 MONTH WARRANTY.

MIGHTY PUMP WILL PUMP 180 GALLONS PERHOUR OF ANY NON-CORROSIVE LIQUID USING A12 VOLT POWER SOURCE.SAFE TO RUN DRY.

3 7/8" LENGTH1 7/8" WIDTH

WEIGHS ONLY 4 1/2 OZS.OPERATES ON 12 VOLT, 9 VOLT, OR 6 VOLT

DESCRIPTIONMP-1 Mighty Pump - 18' LiftMP-2 Mighty Pump - 30' Lift

PART NO.710-1601710-1604

You can find all theseitems and more on our

web site:www.modernusa.comMake Modern Ag Parts

Your #1 choice!


477

PUM

PS & SPR

AYE

QU

IPME

NT

SPRAY GUN KITS FOR LOW-PRESSURE SPRAYING

MAX. RECOMMENDED PRESSURE- 100 PSIG (1400 kPa)MAX. RECOMMENDED TEMPERATURE- 120°F (50° C)

SPRAY GUN KITS: THIS KIT HAS A NUMBER OF POSSIBLE USES: LIVESTOCK ORORCHARD SPRAYING, CROP OR FENCE-ROW SPRAYING, WEED OR INSECTCONTROL, AND CLEANING MACHINERY OR OUTBUILDINGS. KIT SOLDUNASSEMBLED.

KITS CONTAIN:24" ALUMINUM SPRAY GUNPRESSURE RELIEF VALVE1/2" X 10 FT. BYPASS HOSE5/8" X 10 FT. SUCTION HOSE3/8" X 20 FT. PRESSUREHOSEALL CLAMPS AND FITTINGSLESS PUMP

703-1002 SPRAY KIT HYPRO 6ROLLER PUMP, TORKBARAND CHAIN, 1 3/8" -6 SPLINESTANDARD ADAPTER

Spray Gun Kits for Low-Pressure SprayingNylon Pressure Relief Valve

QUALITY & MODERN:OUR PERSONAL COMMITMENT

Providing Customer Satisfaction, Competitive Prices, Quality Products

And Service You Can Rely Upon Since 1963.

Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.


PARTNO.

703-1002

703-1003

478


PUM

PS &

SPR

AYE

QU

IPM

EN

T

SHURFLO PUMPS8000 SERIES DIAPHRAGM WITH AUTOMATIC DEMAND

2088 SERIES DIAPHRAGM PUMP WITH AUTOMATIC DEMAND

FEATURES• Self Priming up to 8 Feet• Chemical Resistant Materials• Designed for Heavy Duty Spraying and Fluid Transfer Applications

• Can Run Dry without Damage

PART NO. MFG. NO DESCRIPTION710-1301 8000-541-236 Auto-Demand Pump

Fits Common Applications as follows: Spot Sprayers, Row Crop Sprayers, Silage

Treatment, Animal Sprayers, Wood Treatment Sprayers, Transfer Applications, Side

Dressing Nitrogen, General Purpose and Transfer Applications

710-1303 8000-543-250 Bypass Pump

Fits Common Applications as follows: Foam Markers, Spot Sprayers, General

Purpose Uses

AUTO DEMAND -1 GPM

60 PSI Demand Switch

3/8" NPT Female Ports

BYPASS -1.4 GPM

45 PSI Internal Bypass

3/8" NPT Female Ports

FEATURES• Self Priming up to 12 Feet• Can Run Dry without Damage• Built-in Check Valve Prevents Back Flow of Fluid into the SolutionTank• Continuous Duty Motor

• Chemical Resistant Materials

PART NO. MFG. NO DESCRIPTION710-1304 2088-313-145 High Flow, Fin Cooled

Diaphragm Pump

Fits Common Applications as follows: Spot Sprayers, Row Crop Sprayers, Silage

Sprayers, Animal Sprayers, Fertilizer Systems, Chemical Application Systems

(Regent One-Pass, ACA, etc.), Mini Bulk Systems, General Purpose and Transfer

Pump Applications

3.6 GPM

45 PSI Demand Switch

1/2 MSPT Ports

A Premium Pump with Fin Cooled Motor

SEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING/BREAKDOWN

SEE FOLLOWING PAGE FOR COMPLETE PARTS LISTING/BREAKDOWN

Shurflo Pumps


479

PUM

PS & SPR

AYE

QU

IPME

NT

Shurflo Pumps 8000 Series Parts Kit ListShurflo Pumps 2088 Series Parts Kit List

SHURFLO PUMPS 8000 SERIES PARTS KIT LIST

MODELNUMBER

8000-541-2368000-543-250

1COMPLETEPUMPHEADASSEMBLY

N/A94-382-09

2

SWITCHASSEMBLY94-375-05

N/A

4

UPPER HOUSING94-379-0094-379-00

5/9BYPASS/

NON BYPASS VALVEASSEMBLY94-390-0594-391-09

6

DIAPHRAGMASSEMBLY

N/AN/A

7/10

DRIVEASSEMBLY94-385-3094-385-32

8

MOTOR11-148-0411-111-00

PUMPPART NO.710-1301710-1303

3CHECK VALVE

ASSEMBLY93-374-05

N/A

SHURFLO PUMPS 2088 SERIES PARTS KIT LIST

MODELNUMBER

2088-313-145

1COMPLETEPUMPHEADASSEMBLY94-236-15

2

SWITCHASSEMBLY94-230-55

4

UPPER HOUSING94-231-30

PUMPPART NO.710-1304

6DRIVE/IMPELLER

DIAPHRAGMASSEMBLY94-238-03

5BYPASS/

NON BYPASS VALVEASSEMBLY94-232-05

7

MOTOR11-185-06

3CHECK VALVE

ASSEMBLY94-237-05

480


PUM

PS &

SPR

AYE

QU

IPM

EN

TMonarch Self Priming PumpsMonarch Centrifugal Pump Parts Breakdown

MONARCH SELF PRIMING PUMPSTHESE SELF-PRIMING CENTRIFUGAL PUMPS ARE THE IDEAL ALL PURPOSEUNITS FOR DRAINING SUMPS, CELLARS, EXCAVATIONS, ETC. OR FOR FILLINGTANKS, LIVESTOCK WATERING, FLOOD IRRIGATION OR FIRE FIGHTING STAND-BY SERVICE. IDEAL FOR AG CHEMICAL TRANSFER AND SPRAYING, LIQUID FER-TILIZER.

MODEL NO.

BSGF-8 &

5BSGF-8

TOTAL IN HEAD FEET

30 40 50 60 70 80

CAPACITY IN US GPM

130 115 102 85 65 37

MONARCH CENTRIFUGAL PUMP PARTS BREAKDOWN

PERFORMANCE CHART

DESCRIPTION

Briggs and Stratton Gas Engine BSGF8 Pump W/ Viton Seals 2" X 3 HP W/ 3 QT. Fuel Tank

Briggs and Stratton Gas Engine 5BSGF-8 Pump W/ Viton Seals 2" X 5 HP W/ 2 QT. Fuel Tank

PART NO.

710-104

710-103

MODELSa=b=

c=

d=e=f=

g=

BSGF-5BSGF-8BSGF-8IC5BSGF-85BSGF-8H5BSGF-8ICBSGF-10BSGF-128BSGF-128BSGF-12H (TYPE B)8BSGF-12ICBSGF-6 (DISCONTINUED)

#1111122333444455667777788899

CODE NO.401660401661414145414142433184176687176688121530121531164640438275438280438480438481438380400136240344240359438180438190438200438477438475193920193930193919438248438030

a1

4

4

1

1

1

1

1

1

b1

4

4

1

1

1

1

1

c(1)1

4

4

1

1

1

1

1

d

1

4

4

1

1

1

1

1

e

1

4

4

1

1

1

1

1

f

11

4

4

1

1

1

1

1

g1

4

4

1

1

1

1

1

1

DESCRIPTIONHANDLE, (1) (5BSGF-8H)HANDLE, (EXCEPT 5BSGF-8H)HANDLEHANDLE, (EXCEPT 5BSGF-12H)HANDLE, (8BSGF-12H ONLY)TOOTHLOCK WASHER, 5/16"TOOTHLOCK WASHER, 3/8"BOLT 5/16" UNF X 3/4"BOLT 5/16" UNF X 7/8"BOLT 3/8" UNF X 1 3/4"ADAPTERADAPTERADAPTERADAPTERSLEEVESLEEVEMECHANICAL SEAL, 3/4" I.D.MECHANICAL SEAL, 1 1/4" I.D.IMPELLERIMPELLERIMPELLERIMPELLERIMPELLERGASKETGASKETGASKETCASINGCASING

QUANTITY REQUIRED FOR#99

101111121314151515151515151515161617171818181919N/S

CODE NO.438040438471185650119800119810174440176530128220201950201952202000201915202001201913201918202002201919119990164620175500176688191140191272191270414140414143128230

a

24

4441

4

4

1

1

b1

24

444111

4

4

1

1

c1

24

444

111

4

4

11

1

d1

24

444

1

4

4

1

1

e

124

444

1

4

41

1

4

f

112

4444

111

4

4

1

18

g

24

4441

4

4

1

1

DESCRIPTIONCASINGCASINGPIPE PLUG, 3/4" NPTBOLT 5/16" UNC X 1 1/2"BOLT 5/16" UNC X 1 3/4"PLAIN WASHERSPRING WASHER, 5/16"NUT, 5/16" UNCENGINE, B & S, 3HP/ #80232ENGINE, B & S, 3HP/ #082232-4036-02ENGINE, HONDA 4HP/#GX120TXENGINE, B & S, 5HP/ #130232ENGINE, HONDA 5HP/#GX160TXENGINE, B & S/IC 5HP/#132232-4035-02ENGINE, B & S, 8HP/#190432ENGINE, HONDA 9HP/#GX270PXENGINE, B & S/IC 8HP/#195432-4047-03BOLT 3/8" UNC X 3/4"STUD, 3/8" UNC X 1 1/4" (NOT SHOWN)ALUMINUM WASHER, 3/8"TOOTHLOCK WASHER, 3/8"FLINGER (EXCEPT 5 BSGF-8H)FLINGER (5BSGF-8H ONLY)FLINGERBASEBASE (NOT AS SHOWN)NUT, 3/8" UNC

N/S: (NOT SHOWN)

QUANTITY REQUIRED FOR


481

PUM

PS & SPR

AYE

QU

IPME

NT

Banjo Polypropylene Pumps

SEE COMPLETE PARTS LISTING AND BREAKDOWN NEXT PAGE.

SUCTION LIFT (FEET)2" SIZE WITH 2" SUCTION LINE

(3 HP)(TIME IN SEC.)

2" SIZE WITH 2" SUCTION LINE(5 HP)

(TIME IN SEC.)

25

48

80

5

12

20

20

42

70

15

35

58

10

24

40

SUCTION LIFTS ANDPRIMING TIMES: 3600 R.P.M.

28

51

85

PERFORMANCE CHART (BASED ON WATER)HEAD IN FEET

PRESSURE P.S.I.2" SIZE - 3 HP GPM2" SIZE - 5 HP GPM

104.3100160

208.7100150

3013.0100140

4017.399128

5021.796115

6026.092100 WARRANTY

1 Year on Pump OnlyMotor must be taken to

Briggs and Stratton Dealer

For additional seal protection, small vanes are molded in to the back sideof the impeller. During operation, these vanes (on the back side of theimpeller) pump out a major portion of the liquid from the seal area whichreduces pressure. The internal operating pressure of the pump is approx-imately 50 P.S.I. With the seal area operating at only 5 P.S.I. This leaves enough liquid in the seal area to lubricate and cool.

Perfectly balanced impeller: Because the impeller is molded, each of the flutes is uniform in thickness and shape giv-ing perfect balance. The impeller is lightweight, which reduces load and wear on the engine crankshaft bearing. Thisgreatly reduces the problem of bearing wear, which causes seal oscillation and failure.

We have reversed the seal! The rotat-ing portion of the seal (ceramic section) islocated in the impeller. The carbon faceand spring section is located in the rearpump case bracket and does not rotate.

The pump is molded from a special high strengthpolypropylene which is glass reinforced for strengthand toughness. The rubber parts are made of EPDMcompound.

Features:• Precision molded construction• Corrosion resistant• Low maintenance• Lightweight• Innovative design• Briggs and Stratton Gas Engine

BANJO POLYPROPYLENE PUMPS

PART NO.710-202710-203710-207710-212710-243

DESCRIPTION200P-3 BANJO POLY PUMP 2" X 3.5 H.P.200P-5 BANJO POLY PUMP 2" X 5.5 H.P.

REPAIR KIT BUNA SEALSREPAIR KIT VITON SEALS

CHECK VALVE FOR 2" BANJO POLY PUMPS

2" Inlet X 2" Outlet

482


PUM

PS &

SPR

AYE

QU

IPM

EN

T

BANJO POLY PUMP REPAIR PARTS LIST

SOME PARTS SHOWN SHIPPED DIRECT FROM FACTORY VIA U. P. S.

NEW DESIGN OLD DESIGNFor Pumps Manufactured After Sept. 1996 For Pumps Manufactured Before Sept. 1996

DESCRIPTION (NEW)

Bodynuts SSLockwasher SS

Poly PumpRear BracketSeal Assembly*

“O” Ring For Screw Heads*Bracket Screws SS“O” Ring Segment*

Body “O” Ring*Poly Pump Impeller

5 Vane Poly Pump ImpellerImpeller Bit SS

Impeller BitImpeller Bit Gasket*

Impeller Hex NutAcorn Nut

Poly Pump VoluteNew Style Poly Pump Volute

Volute Screws SSPoly Pump Check ValvePoly Pump Body Assy.

Body Screws SSPrime/Drain Plug

“O” Ring Prime/Drain Plug*

Upper Volute Screw SSRear Backet Washer SS

Impeller KeyPoly Pump Slinger*

”O” Ring for Seal Assy.*Pump Seal/”O” Ring Kit (Items Marked With *)Repair Kit Buna SealsRepair Kit Viton Seals

ITEM

234

5 & 6789

10111112121314141515161718192021222526272829

PART NO.

710-247710-237710-248710-245710-271710-272710-242710-241710-221710-253710-230710-233710-273710-274710-232710-222710-238710-244710-243710-240

710-250710-246710-249710-275710-276710-277710-246710-278710-252

710-207710-212710-225

DESCRIPTION (OLD)

BodynutsLockwasherRear Bracket

Seal Assembly*“O” Ring For Screw Heads*

Bracket Screws“O” Ring Segment*

Body “O” Ring*3 Vane Impeller

- - -Impeller Stud

- - -“O” Ring Acorn Nut*

Acorn NutAcorn Nut

Volute- - -

Volute ScrewsCheck Valve

BodyBody ScrewsPrime Plug

“O” Ring Prime Plug*Drain Plug

Upper Volute Screw1/4" S.S. Washer

Impeller KeySlinger “O” Ring*Seal ”O” Ring*

Pump Seal/”O” Ring Kit (Items Marked With *)Repair Kit Buna SealsRepair Kit Viton Seals

(NEW)

1010114411111111111211

1011

14111

1

(OLD)

10101144111-1-1111-211

1011114131

-

(NEW)

V07019V0701812703A1271312717

12715A12754

12719A127711277212765

12765A12774VA12775A1277512702

12702A1272512705

12712A1272012777

UV15163127231290012901

12902A1271612710

12999A

- -- -

205PO

(OLD)

V07019V0701812703127131271712715127541271912771

- -12765

- -12774V127751277512702

- -12725127051201212720127761272212723129001290112902127221271012999

- -- -- -

MFG NO.QTY.

☛

+☛+☛☛+

++☛☛

+

++

☛

☛☛☛

+ For old design pumps.☛ Stock items.

2” Poly Pump only for Banjo #205P

Banjo Poly Pump Repair Parts List


483

PUM

PS & SPR

AYE

QU

IPME

NT

Cast Iron Banjo PumpBanjo Cast Iron Pump Parts Breakddown

CAST IRON BANJO PUMP

WARRANTY: 1 Year on Pump OnlyMotor must be taken to Briggs

and Stratton Dealer

BANJO CAST IRON PUMP PARTS BREAKDOWN

*Items Included In Repair Kit

ALL PARTS SHOWN SHIPPED DIRECT FROM FACTORY VIA U. P. S.

DESCRIPTION200PI-5 Banjo Cast Iron Pump 2" X 5.5 H.P.

Repair Kit for Cast Iron Pump

PART NO.710-214710-208

Features: • Cast iron construction for rugged dependable service

• Stainless steel shaft sleeve to protect engine shaft

• Carbon ceramic seal with stainless steel cup and spring with viton rubber

• Replaceable inlet and outlet flanges• Dynamic balanced impeller• Briggs and Stratton Gas Engine

PRECAUTION-WARNING: Pleasedo not run pumps dry, restrictor reduce port sizes or deadhead pumps. This could causecomponent failure to pump. NoFlammables.

ITEM112233

4445556789

1011

MFG NO.170001700117002170031700417046

1700517006*1700717008*17008-4.117008-4.6170091701017011*170131701617018*

DESCRIPTIONFlange - Outlet 2"Flange - Outlet 1 1/2"Flange - Inlet 20º 2"Flange - Inlet 20º 1 1/2"Adapter - Gas EngineCF Adapter - For Close Coupled Electric Drive PumpSleeve - Drive 5/8"Sleeve - Drive 3/4"Sleeve - Drive 7/8"ImpellerImpeller - 4.1"Impeller - 4.6"Impeller NutNut, Hex 1/2"-13 UNF - RHPlate - WearGasket EPDMGasket & Flap EPDMGasket - Adapter

ITEM12131414151617181920222324252626282930

MFG NO.1701917022170231702417025*17026170271702917030*V10118V101191288312882170401702817035*17042V10118V10119

DESCRIPTIONCapscrew 5/16"-18 x 3/4"HandleClamp, 5/8", 3/4" ShaftClamp, 7/8" ShaftGasket - Wear PlatePump HousingNut, Acorn 5/16"-18Capscrew 5/16"-18 x 1 3/4"Flat Head 82º C'SK. ScrewLock Washer 5/16"5/16"-18 Hex Nut S.S.Bearing Only with 3/4" Straight ShaftBearing Pedestal AssemblyCap Screw 5/16"-24 NFSeal Assy. (EPDM)Seal Assy. (Viton)StudLock Washer 5/16"5/16"-18 Hex Nut S.S.

484


PUM

PS &

SPR

AYE

QU

IPM

EN

T

POLYPROPYLENE PRECISION MOLDEDBANJO CAM LEVER COUPLINGS

FEMALE COUPLER-HOSE SHANKTYPE C

FEMALE COUPLER-FEMALE TYPE D

POLYPROPYLENE HOSE BARBS ANGLE COUPLINGS

TYPE F

MALE ADAPTER-MALE THREADMALE ADAPTER-HOSE SHANKTYPE F

TYPE AMALE ADAPTER-FEMALE THREAD FEMALE COUPLER-MALE THREAD

TYPE B

PART NO.314-624314-632314-640314-648314-664314-672

SIZE3/4"1"1 1/4"1 1/2"2"3"

MFG. NO.075A100A125A150A200A300A

SIZE3/4"1"1 1/4"1 1/2"2"3"

MFG. NO.075B100B125B150B200B300B

PART NO.314-1624314-1632314-1640314-1648314-1664314-1672

PART NO.314-2624314-2632314-2640314-2648314-2664314-2672

SIZE3/4"1"1 1/4"1 1/2"2"3"

MFG. NO.075C100C125C150C200C300C

PART NO.314-3624314-3632314-3640314-3648314-3664314-3672

SIZE3/4"1"1 1/4"1 1/2"2"3"

MFG. NO.075D100D125D150D200D300D

TYPE E

PART NO.314-4624314-4632314-4640314-4648314-4664314-4672

SIZE3/4"1"1 1/4"1 1/2"2"3"

MFG. NO.075E100E125E150E200E300E

MFG. NO.075F100F125F150F200F300F

PART NO.314-5624314-5632314-5640314-5648314-5664314-5668

SIZE3/4"1"1 1/4"1 1/2"2"3"

PART NO.

314-825314-827314-828314-833

MFG NO.

HB-150HB-150200HB-200HB-300

THREAD SIZE

1-1/2"1-1/2"

2"3"

BARBSIZE

1-1/2"2"2"3"

PART NO.314-5672

MFG. NO.200F90

SIZE2"

P.S.I. RATINGS ON ALL BANJO POLY FITTINGSP.S.I.

100 psi @ 0° Fahrenheit125 psi @ 70° Fahrenheit

70 psi @ 150° Fahrenheit75 psi max.

SIZE

3/8" thru 2"

2-1/2 thru 3"

Banjo Cam Lever Couplings


485

PUM

PS & SPR

AYE

QU

IPME

NT

Banjo Cam Lever CouplingsBasket Strainers

Banjo Ball Valves, Angle Valves

BANJO CAM LEVER COUPLINGS

ANGLE VALVES

REPLACEMENT HANDLE FOR SINGLE UNION BALL VALVES

REPLACEMENT HANDLES FOR BALL AND ANGLE VALVES

CAP FOR MALE ADAPTER

BANJO BALL VALVES

BANJO SINGLEUNION BALL

VALVES

REPLACEMENT GASKETS FOR CAM COUPLINGS

PLUG FOR FEMALE COUPLER

PART NO.314-7624314-7632314-7648314-7664314-7672

MFG. NO.075CAP

100/125CAP150CAP200CAP300CAP

SIZE3/4"

1" or 1-1/4"1-1/2"

2"3"

SIZE3/4"

1" or 1-1/4"1-1/2"

2"3"

PART NO.314-6624314-6632314-6648314-6664314-6672

MFG.NO.075PL100/125PL150PL200PL300PL

BASKET STRAINERSPART NO.319-1048319-1064

MFG. NO.150SBS200SBS

SIZE1-1/2"

2"

PART NO.

314-2061314-2062314-2064314-2065314-2067

MFG. NO.

075G100G150G200G300G

COUPLINGSIZE3/4"

1"; 1-1/4" 1-1/2"

2"3"

PART NO.

319-1319-2319-3319-5319-7319-8319-9319-10319-11

MFG. NO.

V50V075V100V125FPV150V200V200FPV300V300FP

PORT OPENING

1/2"3/4"3/4"

1-1/4"1-1/2"1-1/2"

2"2-1/2"

3"

SIZE

1/2" FPT3/4" FPT1" FPT1 1/4" FPT1 1/2" FPT2" FPT2" FPT3" FPT3" FPT

PART NO.319-32319-33

MFG. NO.VA150VA200

SIZE

1 1/2" FPT2" FPT

PORT OPENING

1-1/2"1-1/2"

PART NO.319-17319-18319-19319-20319-21319-22

SIZE1/2"3/4"1"

1-1/4"1-1/2"

2"

MFG. NO.UV050FPUV075FPUV100FPUV125FPUV150FPUV200FP

PART NO.

319-102

MFG. NO.

UV07153

FOR VALVE NO.

319-17, 18

PART NO.319-204319-303319-403319-503

MFG. NO.V07153V10153V20153V25153

FOR VALVE NO.319-1, 2, 3319-5319-7, 8, 32, 33319-9, 10, 11

486


PUM

PS &

SPR

AYE

QU

IPM

EN

T

HYPRO "POLYPROPYLENE"LINE STRAINERS

DURABLE POLYCAP AND BOWLS

PART NO.712-3320712-3321712-3322712-3323

MFG. NO.3350-00343350-00723350-00733350-0058

SIZE3/4"1"1-1/4"1-1/2"

SCREEN MESH50505050

3350 SERIES STRAINERS HAVE FEMALE PORTS WITH STAINLESS STEEL FERRULE REINFORCEMENTS. 3/4", 1" AND 1 1/4" NPT PORT SIZES. EPDM GASKET. HEAVYDUTY STAINLESS STEEL AND MONEL SCREENS AVAILABLE.RATING: 150 PSI AT 70°F./100 PSI AT 125°F.

REPLACEMENT SCREENS

PART NO.712-3801712-3802712-3803712-3807

MFG. NO.3800-00253800-00443800-00413800-0066

STRAINERSIZE1/2" & 3/4"1-1/4"1"1-1/2"

MESH50505050

REPLACEMENT GASKETS

PART NO.712-1744712-1757712-1745712-1758

MFG. NO.1700-00441700-00571700-00451700-0058

STRAINER SIZE

1/2" & 3/4"1" THRU 1-1/2"

1/2" & 3/4"1" THRU 1-1/2"

MATERIALBUNABUNAVITONVITON

Hypro “Polypropylene” Line StrainersReplacement ScreensReplacement Gaskets

QUALITY & MODERN:OUR PERSONAL COMMITMENT

Providing Customer Satisfaction, Competitive Prices, Quality Products

And Service You Can Rely Upon Since 1963.


487

PUM

PS & SPR

AYE

QU

IPME

NT

Banjo Line Strainers Suction Strainers

BANJO LINE STRAINERS

SUCTION STRAINERS

• PRECISION MOLDED CONSTRUCTION

• CORROSION RESISTANT

• LIGHT WEIGHT

• FIBERGLASS REINFORCED

• EASY GRIP CAP

• STAINLESS STEEL SCREEN

• EDPM GASKET

POLYPROPYLENECOMPLETE UNITS

MFG. NO.

LS07450LS100-40LS125-20

LS150-50PLS200-50P

SCREEN MESH

4040205050

SIZE

3/4" X 3/4"1" X 1"

1-1/4" X 1-1/4"1-1/2" X 1-1/2"

2" X 2"

PARTNO.

319-1205319-1208319-1210319-1217319-1223

GASKETS FOR STRAINERS STAINLESS STEEL SCREENS FOR STRAINERS

PART NO.319-1268319-1269319-1270

*319-1285

SIZE1/2" & 3/4"1" & 1-1/4"1-1/2" & 2"1-1/2" & 2"

MFG. NO.LS075GLS100GLS200GLS150G

CAP FOR STRAINERS* NEW STYLE SQUARE GASKET

MFG. NO.

LS120LS140LS180LS220LS250

SCREEN MESH

2040802050

STRAINER SIZE

1" & 1 1/4"1" & 1 1/4"1" & 1 1/4"1 1/2 & 21 1/2 & 2

PART NO.

319-1254319-1255319-1256319-1259319-1261

PART NO.319-1281

MFG. NO.LS200C

SIZE2"

SUCTION STRAINER APPROX. WT. 4 OZ.ALUMINUM WITH STAINLESS STEEL SCREENS

PART NO. SIZE MESH MFG.NO.

700-730 1/2" 50 7130-675-AL

NYLON SUCTION STRAINER

ECONOMICAL, COMPLETELY NYLON SUCTION STRAIN-ER WITH NYLON SCREEN. AVAILABLE WITH 3/4" HOSE BARB AND IN 50-MESH SCREEN

PART NO. SIZE MESH MFG. NO. 712-3325 3/4" 50 36761-2

# 1700 SUCTION STRAINER APPROX. WT. 8 OZ.ALUMINUM WITH STAINLESS STEEL SCREENS

PART NO. INLET MESH MFG. NO.703-400 3/4" 40 1700-2

488


PUM

PS &

SPR

AYE

QU

IPM

EN

T

TEEJET LIQUID LINE STRAINERS122 SERIES Compact size strainer well suited for small agricultural and turf sprayers. Polypropylene construction forexcellent chemical resistance. Maximum pressure 150 P.S.I. 50 Mesh screen.PART NO. TEEJET NO. PIPE CONNECTION700-618 12212PP50 ½"700-619 12234PP50 ¾"

124 SERIESStandard size strainer with heads available in polypropylene, nylon, and aluminum. Bowlmaterials include nylon or polypropylene. Each strainer includes stainless steel screen withpolypropylene screens. Viton o-ring seal supplied with ¾" and 1" nylon models. EPDM sealsupplied with ¾" and 1" polypropylene models.

PART NO. TEEJET NO. PIPE CONNECTION MATERIAL MESH700-604 124A34NYB50 ¾" Nylon 50700-608 124A1NYB50 1" Nylon 50700-609 124A114NYB50 1 ¼" Nylon 50700-613 124A112NYB50 1 ½" Nylon 50700-620 124A34PP50 ¾" Poly 50700-621 124A1PP50 1" Poly 50700-614 124A34AL50 ¾" Alum 50700-615 124A1AL50 1" Alum 50700-616 124A114AL50 1 ¼" Alum 50700-617 124A112AL50 1 ½" Alum 50

PARTS FOR 124 SERIES LINE STRAINERSPART NO. TEEJET NO. DESCRIPTION700-632 CP169033 30 Mesh Replacement Screen for ¾" and 1"700-633 CP169034 50 Mesh Replacement Screen for ¾" and 1"700-634 CP169035 80 Mesh Replacement Screen for ¾" and 1"700-635 CP159411 16 Mesh Replacement Screen for 1 ¼" and 1 ½"700-636 CP159414 80 Mesh Replacement Screen for 1 ¼" and 1 ½"700-637 CP159413 50 Mesh Replacement Screen for 1 ¼" and 1 ½"700-638 CP159412 30 Mesh Replacement Screen for 1 ¼" and 1 ½"700-639 CP15017NY Nylon Replacement Bowl 1 ¼" and 1 ½"700-761 CP15403NY Nylon Replacement Bowl ¾" and 1"700-762 CP12288NY Nylon Replacement Bowl for 1 ¼" and 1 ½"700-640 CP12291VI O-Ring Seal Viton for 1 ¼" and 1 ½"700-763 CP77172226BU O-Ring Seal Buna for ¾" and 1"700-764 CP77172226VI O-Ring Seal Viton for ¾" and 1"700-765 CP12291BU O-Ring Seal Buna for 1 ¼" and 1 ½"

Teejet Line StrainersReplacement Screens, Gaskets, Bowls,In Line Strainers, Teejet Brass Strainer


489

PUM

PS & SPR

AYE

QU

IPME

NT

3/4Q IN-LINE STRAINERCompact strainer for pressures to 125 P.S.I.Made of brass with ¾" NPT female inlet and outlets.

PART NO. TEEJET NO. DESCRIPTION700-750 3/4Q-50 Brass Strainer- 50 Mesh Screen700-752 46334 Replacement Screen- 50 Mesh700-754 4634BU Buna Gasket

ATW TEEJET BRASS STRAINER FOR PRESSURES UP TO 125 P.S.I.Brass line strainer has stainless steel double screen design withbottom pipe plug for easy flushing and cleaning. Lower cap foreasy screen removal. ¾" NPT female inlet and outlet.

PART NO. TEEJET NO. DESCRIPTION700-653 34ATWB50 Brass Line Strainer with 50 Mesh Screen700-654 34ATWAL50 Aluminum Line Strainer with 50 Mesh Screen700-678 CP169083 50 Mesh Screen for ATW Strainer700-679 CP169085 100 Mesh Screen for ATW Strainer700-680 CP5851 Bottom Cap for ATW Strainer700-682 CP5852NY Gasket for 5851 Cap

3/4Q

ATW

OUR PERSONAL COMMITMENTProviding Customer Satisfaction,

Competitive Prices, Quality Products And Service You Can Rely Upon Since 1963.

Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.


490


PUM

PS &

SPR

AYE

QU

IPM

EN

TPressure Gauges-Glycerin FilledStandard GaugeGauge Damper

PRESSURE GAUGES

GLYCERIN FILLED

GAUGE DAMPER

2 1/2" GLYCERIN-FILLED GAUGE.GAUGES FILLED WITH GLYCERIN PROVIDEEFFECTIVE DAMPING OF MOST PULSATIONAND VIBRATION, AND PROVIDE LUBRICATIONOF ALL MOVING PARTS; THESE GAUGESREQUIRE NO DAMPING DEVICE. STAINLESSCASE AND RIM. BOTTOM STEM 1/4"N.P.T. BRASS

STANDARD GAUGES

PART NO.720-106720-107720-108720-109720-110720-111720-112720-113720-114720-115720-116720-117720-118

RANGE P.S.I.0-300-60

0-1000-1600-2000-3000-600

0-10000-15000-20000-30000-50000-6000

2 1/2" STANDARD GAUGELOW TO MODERATE PRESSURE GAUGE WITH SPECIAL VALVE TO INSURE ACCURACY. STANDARDWITH PLASTIC CASE. EASILY CLEANED VIBRATIONSNUBBER HOLE IN 1/4" N.P.T. STEM.BOTTOM STEM.

PART NO.720-2432720-2433720-2436720-2437720-2439

RANGE P.S.I.0-60

0-1000-2000-3000-600

• REDUCES VIBRATION OF STANDARD GAUGES• ECONOMICAL• NICKEL PLATED BRASS• 1/4 MPT X 1/4 FPT MFG. NO.

2404-0047PART NO.712-2401


491

PUM

PS & SPR

AYE

QU

IPME

NT

ITEM MFG. NO. DESCRIPTION CAT. NO.

1 1001-004-02 HANDLE LOCK NUT

2 1001-003-01 HANDLE RET. NUT

3 1100-051-89 PLASTIC NUT

4 1001-002-01 FERRULE WASHER

5 1100-004-01 LOWER VALVE ROD

6 1000-016-01 WORM

7 1000-011-01 BARREL 700-35

8 1200-002-01 NOZZLE HEAD 700-6234

9 1300-053-11 NOZZLE GASKET 700-6201

10 1200-007-05 NOZZLE DISC 700-6203

11 1200-004-01 NOZZLE CAP 700-6202

12 1200-001-01 UPPER VALVE ROD 700-6223

13 1200-005-02 STRAIGHT GUIDE

14 1200-009-01 SPRAY EXPANDER

15 1005-056-11 DISC GASKET 700-6211

16 1200-008-01 SWIRL BAFFLE 700-6232

17 1005-057-01 VALVE SCREW 700-6233

18 1100-009-01 VALVE CAP 700-6226

19 6702-059-09 VALVE GASKET 700-6214

20 1100-056-03 VALVE SPRING 700-6206

21 1100-010-01 VALVE HOLDER 700-6207

22 1100-058-11 POLY VALVE 700-6204

23 1100-011-01 VALVE WASHER 700-6208

24 1100-008-01 VALVE STEM 700-6227

25 1100-053-09 "O" RING 700-6209

26 1000-002-01 PACKING NUT 700-6228

27 1000-051-05 PACKING RING

28 1100-052-05 TRIGGER PIN

29 1100-054-05 LATCH PIN (2)

30 1100-003-02 LATCH

31 1100-055-03 TRIGGER SPRING

32 1100-002-01 TRIGGER

33 1100-011-01 INTAKE 3/4 FGHT 700-6208

34 1000-055-49 HOSE GASKET

W L HAMILTON SPRAY GUNS

PARTS DIAGRAM

WITH REVOLVING HANDLE ADJUSTMENTPART NO. MFG. NO. INLET MATERIAL

700-15 1200-1 3/4" GHT BRASS SENIOR GUNS ARE THE MODEL OF THE INDUSTRY;LONG AND RUGGED - CAPABLE OF THE VARIOUSDEMANDING AGRICULTURAL SPRAY CHORES. # 5DISC IS STANDARD.

PART NO. MFG. NO. INLET MATERIAL700-14 1000-1 3/4" GHT BRASS

PART NO.

492


PUM

PS &

SPR

AYE

QU

IPM

EN

TGun Jet No. 46 Trigger ValveTeejet Trigger Valve

GUNJETNO. 46 TRIGGER VALVE

MFG NO.

CP7502-ALCP6710-1-BUCP7501-ALCP7458-ALCP7503-LEACP7500-ALCP7504-SSCP7499-SSCP7622-302SSCP7498-SSCP7623-IZPCP6509-INPCP7477-IZPCP17720-420SSCP5808-BUCP7626-BU*AB46-KIT

DESCRIPTION

SEAT HOLDER, ALUMINUMSEAT, BUNA-NSEAT WASHER, ALUMINUMBODY, ALUMINUMPACKING, THERMO-LEATHER (3 REQUIRED)PACKING SCREW, ALUMINUMSPRING, STAINLESS STEELSTEM, STAINLESS STEEL#6 BURR, TYPE 302 STAINLESS STEELSTEM NUT, STAINLESS STEELR3220 RIVET, STEEL, ZINC PLATED (2 REQUIRED)TRIGGER, STEEL, NICKEL PLATEDTRIGGER LOCK, STEEL, ZINC PLATEDROLL PIN, TYPE 420 STAINLESS STEELGASKET, FOR GARDEN HOSE CONN., BUNNA-N (2 REQUIRED)GASKET, FOR OUTLET CONN., BUNA-N (2 REQUIRED)SPARE PARTS KIT

PART NO.

**

*

**

NEW NO. 473 TRIGGER VALVE

ATTACHES TO THE INLETS OF ANY GUNJETSPRAY GUNS WITH 3/4" GARDEN HOSETHREAD (F) CONNECTIONS. PROVIDES "ON-OFF" TRIGGER CONTROL OF GUN. MADE OFALUMINUM WITH STAINLESS STEEL INTER-NAL PARTS. WEIGHT 13 OZ. BUILT WITH 3/4"GARDEN HOSE THREAD (F) INLET CONNEC-TION.

PART NO.700-6 CALL FOR PRICES AND AVAILABILITY ON PARTS

16

15

43 2 1 15

1413

1112

8 7 6

5

10 9

Top quality hand valves for use with spray nozzles extensions and handle to suit application needs. Valves have 1/4”NPT Female connection. Maximum flow rate of 2 GPM with maximum pressure of 250 P.S.I. Use with all types of Teejetand Conejet tips.

700-151

PART NO. DESCRIPTION 700-58 4688 Triggerjet Valve w/Triggerlock

700-10 6466 Triggerjet valve less Triggerlock-with extra long trigger

700-6033 AB4688 Repair Kit for 4688/6466

700-9 4727 Suregrip Handle- brass with rubber covering-1/4” NPT Male

ITEM

123456789

10111213141516

Typical assembly.

6466

4727


493

PUM

PS & SPR

AYE

QU

IPME

NT

31 Spray Gun

31 SPRAYGUN

ITEM123

56789

11121314151617

DESCRIPTIONCAP, BRASSSPRAY TIPSEAT, BRASS & TEFLON (STANDARD)SEAT, BRASS (OPTIONAL)SEAT, LEAD (OPTIONAL)SUB-ASSEMBLY, STAINLESS STEEL STEM & BRASS GUIDESPRING, STAINLESS STEEL, TYPE 302TRIGGER LOCK WIRE, STAIN. STEEL, TYPE 304 (FOR #31TLONLY)TRIGGER, STEEL-NICKEL PLATEDSCREW HOUSING, STEEL-ZINC PLATEDSCREW, STEEL-ZINC PLATEDPACKING, TEFLON (3 REQUIRED) (STANDARD)PACKING, LEATHER (4 REQUIRED) (OPTIONAL)PACKING SCREW, BRASS-NICKEL PLATEDLOCKNUT, BRASSNUT, BRASSSTRAINER BODY, BRASS-NICKEL PLATED (OPTIONAL)SCREEN SUPPORT, BRASS (OPTIONAL)MONEL SCREEN, 50 OR 100 MESH (OPTIONAL)GASKET, NYLON (OPTIONAL)BODY, BRASS (FOR #31)BODY, BRASS (FOR #31-1/4 F)BODY, BRASS (FOR #31 TL)BODY BRASS (FOR #31 TL - 1/4 F)SPARE PARTS KIT

PART NO.700-1325

*4

10

18

*

*

*

CALL FOR PRICES AND AVAILABILITY ON PARTS

FOR FLOW RATES UP TO 5 GPM

700-3

BRASS FORGED BODY AND NICKEL PLATED STEEL TRIGGER. TEFLON VALVE SEAT AND PACKING ... STAINLESS STEEL VALVE STEM.WEIGHT 12 OUNCES. COMFORTABLE PALM FITTING GUN. FOR USE WITHANY TEEJET SPRAY TIP. 1/4" NPS (M) INLET CONNECTION.

1

23

4

5

6

7

8

910 11

1213

14151617

18

PART NO.CP1325

7490-BRTF74907490-L9032-1-BRSS9134-302SS9108-304SS9033-INP9034-1-IZP9034-2-IZP7487-1-TEF7487-LEA7485-NP903590368633-NP86343929-M8635-NY90629062-19062-39062-4*AB31-KIT

PART NO.700-3

700-381

FOR PRESSURES UP TO 500 P.S.I.

494


PUM

PS &

SPR

AYE

QU

IPM

EN

T

TRIGGERJET POLY-PRO SPRAY GUNS

Triggerjet Polypropylene Sprayguns are lightweight for use with all types of low pressure spray systems with150 P.S.I. maximum operating pressure. Guns have trigger lock, adjustable cone nozzles, and accept all stan-dard Teejet Spray tips and tip strainers.

PART NO. TEEJET NO. DESCRIPTION 700-16 22670PP15406 Complete Gun 15” Wand-3/8” Hose Barb700-17 22670PP24406 Complete Gun 24” Wand-3/8” Hose Barb700-201 22670PP1514 Complete Gun 15” Wand-1/4” NPTF Female Inlet700-202 22670PP2414 Complete Gun 24” Wand-1/4” NPTF Female Inlet700-24 22650PP14 Gun Only (Less Tip & Wand) - 1/4” NPTF Female Inlet700-25 22650PP300 Gun Only (Less Tip & Wand) - 1/4” Hose Barb700-12 22650PP406 Gun Only (Less Tip & Wand) - 3/8” Hose Barb700-6095 CP22654PP Poly Handle Only- 1/4” NPTF Female700-6071 CP2266315PP 15” Poly Extension Tube700-88 CP2266324PP 24” Poly Extension Tube700-46 CP2266515PP 15” Replacement Wand700-47 CP2266524PP 24” Replacement Wand700-48 CP22673PP 45 Degree Wand Adapter700-768 CP7717-2/110 Viton O-Ring for Poly Cap (2 Required)700-49 CP22668PP Wand End Cap700-6083 AB22670PP Repair Parts Kit

TRIGGERJET POLY GUN WITH ALUMINUM WAND

TEEJET ADJUSTABLE POLY-NOZZLES

This lightweight polypropylene gun with a 15” aluminum extensions. Comfortable handle with trigger lock and3/8” hose barb inlet. Accepts all standard Teejet Spray Tips. Maximum pressure 100 P.S.I.PART NO. TEEJET NO.710-1504 50120AL18

Adjustable Conejet poly tips provide excellent chemical resistance. They are lightweight and well suited forhand held & backpack sprayers. EPDM standard O-ring- 11/16” Teejet thread. For 22670 series above andmany others.

PART NO. TEEJET NO. DESCRIPTION 700-67 5500PPBX3 No. 3 Nozzle700-63 5500PPBX6 No. 6 Nozzle700-64 5500PPBX8 No. 8 Nozzle700-65 5500PPBX12 No. 12 Nozzle700-66 5500PPBX18 No. 18Nozzle

Trigger Jet Poly-Pro


495

PUM

PS & SPR

AYE

QU

IPME

NT

No. 23L Gun

DESIGNED SO THAT ONLY INLET BODY, CAPAND SPRAY TIPARE TOUCHED BY SPRAY CHEMICALS... BRASS. 1/4" NPS (M)INLETCONNECTION. STRONG ALUMINUM ALLOY HANDLE. TEFLON VALVE SEATAND PACKING AND STAINLESS STEEL VALVE STEM. WEIGHT- NO. 23L... 15 OUNCES.. FOR USE WITH ANY TEEJET SPRAY TIP...OR ADJUSTABLE CONEJETS AND MULTEEJETS.

1 2 3 4 56

7 8 913

14121110

18

1615

17

PART NO. ITEM

12

67

9101112131415161718

DESCRIPTION

TIP RETAINER, BRASS, NICKEL PLATED OR STAINLESS STEELSPRAY TIP, BRASS OR STAINLESS STEELVALVE SEAT, BRASS AND TEFLON® FLUOROPOLYMER RESIN OR STAINLESS STEEL AND TEFLON® FLUOROPOLYMER RESINMAIN STEM ASSEMBLY, TYPE 302 STAINLESS STEEL STEM WITH BRASSOR STAINLESS STEEL STEM GUIDEINLET BODY, BRASS, NICKEL PLATED OR STAINLESS STEELKEY, STEEL, ZINC PLATEDCUP PACKING, BUNA--NPACKING SCREW, BRASS, NICKEL PLATED OR STAINLESS STEELTRIGGER GUIDE, STEEL, ZINC PLATEDSPRING STUD, STAINLESS STEELSPRING SCREW, STEEL ZINC PLATEDMAIN SPRING, TYPE 302 STAINLESS STEELBODY, ALUMINUMLOCK NUT, STAINLESS STEELTRIGGER GUARD, STEEL, NICKEL PLATEDTRIGGER, STEEL, NICKEL PLATEDPAN HEAD SCREW, STAINLESS STEELRIVET, STAINLESS STEEL (2 REQUIRED)SPARE PARTS KIT-for 23LSPARE PARTS KIT-Stainless Steel for 23LSpare Parts Kit for 23H

BRASS

CP1325-NPTP**

CP7892-IZPCP14255-1-BUCP16071-SSCP8591-IZPCP7491-SSCP7480-IZPCP16053-1-302SSCP16054-1-ALCP7486-SSCP9539-INPCP14252-INPCP9697-SSCP8038-SS*AB23L*AB23L-SS*AB23H

CP16052-NP

CP7482-1-BR302S

CP7490-TEF

5

8

4

3*

*

*

*

**SPECIFY SPRAY TIP SIZE REQUIRED

CALL FOR PRICES AND AVAILABILITY ON PARTS

700-27

700-2

NO. 23L FOR PRESSURES UP TO 250 P.S.I.NO. 23H FOR PRESSURES UP TO 1000 P.S.I.

PART NO. DESCRIPTION 700-1 Gunjet-250 P.S.I.700-110 Gunjet-1000 P.S.I.700-111 23L767624-24” Aluminum Extension

700-1325

700-6034

496


PUM

PS &

SPR

AYE

QU

IPM

EN

T43L & H Heavy Duty Trigger Control

Knurled body of tip rotates thru half turn to provide spray selection from awide angle, finely atomized cone spray to a straight stream spray. Tip deliv-ers up to 2.7GPM. Fits Gunjets, valve bodies, and other spray guns withTeejet 11/16” thread.

PART NO. TEEJET NO. PART NO. TEEJET NO.700-120 5500X2 700-121 5500X10 700-31 5500X6 700-122 5500X12700-32 5500X8 700-123 5500X18

BRASS ADJUSTABLE SPRAY TIPS-5500 SERIES

30L GUNJET SPRAY GUN-250 P.S.I. MAX

This gun has body and trigger molded of tough nylon designed to withstandrough treatment and high impact. Great for hand spraying or high-pressurewashing. Accomodates all interchangable Teejet spray tips. Also available1000 P.S.I.

PART NO. TEEJET NO. DESCRIPTION 700-105 30L 250 P.S.I. Gunjet700-106 3014 1000 P.S.I. Gunjet700-107 AB30L Repair Kit for Gunjet

BRASS WAND EXTENSIONSFits Model 23L, 31 Gunjet & Trigger ValvesPART NO. TEEJET NO. DESCRIPTION 700-41 7715-8 8” Straight Extension700-42 7715-18 18” Straight Extension700-43 7715-24 24” Straight Extension700-44 7715-30 30” Straight Extension700-45 7715-45 45” Straight Extension

PART NO. TEEJET NO. DESCRIPTION 700-124 6771-18 18” Curved Extension700-125 6671-24 24” Curved Extension700-74 6671-30 30” Curved Extension700-75 6671-36 36” Curved Extension

7715 Series-250 P.S.I. MAX

6671 Series-125 P.S.I. MAX

HIGH PRESSURE BRASS WAND EXTENSIONS

9527 Series

For pressures to1000 P.S.I. Fits models 23H and 31.PART NO. TEEJET NO. DESCRIPTION 700-126 952724 24” Curved Extension with

rubber cover.


497

PUM

PS & SPR

AYE

QU

IPME

NT

43L & H HEAVY DUTY TRIGGER CONTROL

BRASS CONSTRUCTION TO MEETALL FARM SPRAYING NEEDS.

Quality designed and buitl for heavy-duty service. Stemextendsthrough extention to valve seat located directly behindorfice disc for drip-free shut-off and instant operating response.Convenient trigger locks for continuious spraying. Trigger isextra long for easy four-finger control. Hardened stainless steelType D orifice disc supplied with No. 6 orifice disc. Disc arecorrosion and erosion resistant. Exposed packing nut.. foreasy adjustment of packing.

CALL FOR PRICES ANDAVAILABILITY ON

PARTS

PART NO.700-4700-7700-55700-127700-128700-1325700-5005700-6014

DESCRIPTION43L 22” BRASS LOW PRESSURE SPRAY GUN43H 22” BRASS HIGH PRESSURE SPRAY GUN43LA 13” BRASS LOW PRESSURE SPRAY GUN43LAL 22” ALUM. LOW PRESSURE SPRAY GUN43HAL 22” ALUM. HIGH PRESSURE SPRAY GUN1325 BRASS CAPD6 ORIFICE DISCCP6604 22” BRASS BARRELL

1 2 4 5 6 7 9 8 7

10 11 13 15 16 17 18

14

25

28

2627

30

19 20 21 22 23 24

3

12

29

**SPECIFY ORIFICE DISC SIZE

BRASSCP1325D- **CP4743-NYCP1056610565CP10571CP6943-ALCP19238-416SSCP6604CP6492CP6492ALCP6601-302SSCP6602-LEACP6602-TEFCP19237CP6599CP9641-INPCP6595-SSCP7991-IZPCP6597-INPCP6591-SSCP6589-IZPCP6594-SSCP6588-IZPCP6592-302SSCP6593-1-SSCP6593-2-SSCP14477-1-ALCP7623-IZPCP6509-INPCP6510-INPCP11757-INPCP13798-INP*AB43-KIT*AB43AL-KIT

TEM123456789

101011

1314151617181920212223

252627282930

12

24

(NO. 43-) DESCRIPTIONCAP, BRASS ORIFICE DISC, HARDENED STAINLESS STEELGASKET, NYLONNOZZLE HOUSING, BRASS SEAT PLUG, SEAT PLATE, WASHER & CORE SUB-ASB.GUIDE VANE, BRASSGASKET, ALUMINUM (2 REQUIRED)STEM, TYPE 416 STAINLESS STEELBRASS INLET BODY, BRASS INLET BODY, ALUMINUM PACKING WASHER, TYPE 302 STAINLESS STEELPACKING, LEATHER (3 REQUIRED)PACKING, TEFLON (3 REQUIRED)PACKING SCREW,LOCKNUT, BRASS STEM NUT, STEEL-NICKEL PLATEDTRIGGER STOP SPRING, STAINLESS STEELWASHER, STEEL-ZINC PLATEDTRIGGER GUIDE, STEEL-NICKEL PLATEDSPRING STUD, STAINLESS STEELSTOP ADJUSTMENT NUT, STEEL-ZINC PLATEDSPRING FOR STOP ADJUSTMENT NUT, STAIN. STEELSPRING SCREW, STEEL-ZINC PLATEDSPRING GUIDE WASHER, TYPE 302 STAIN. STEELMAIN SPRING, STAIN. STEEL (FOR MODEL #43L-)MAIN SPRING, STAIN. STEEL (FOR MODEL #43H-)HANDLE BODY, ALUMINUMRIVET, STEEL-ZINC PLATED (2 REQUIRED)TRIGGER, STEEL-NICKEL PLATEDTRIGGER STOP, STEEL-NICKEL PLATEDSCREW, STEEL-NICKEL PLATEDTRIGGER GUARD, STEEL-NICKEL PLATEDSPARE PARTS KITSPARE PARTS KIT

*

*

PART NO.700-1325

700-6004700-6005

700-6022

700-6030700-6014700-6007700-6008

700-5700-129

*

*

NO. 43L FOR OPERATING PRESSURES UP TO 200 P.S.I.NO. 43H FOR OPERATING PRESSURES UP TO 800 P.S.I.

43L & H Heavy Duty Trigger Control

498


PUM

PS &

SPR

AYE

QU

IPM

EN

T143 ALGH Spraygun

GUNJET ROTATING HANDLE SPRAYGUNSFor spot spraying, tree spraying, livestock spraying and power washing at pressurefrom 30 to 800 P.S.I. Sprayguns are operated by rotating handle 360° from shutoff tomaximum flow position. As handle is turned, spray changes from initial cone spray to intermediate conespray to straight stream. Spray tips are interchangable orifice discs made of corrosion resistant hardenedstainless steel. Guns are available in both brass and aluminum.

12 Series: Brass Construction- No. 6 orifice disc. 3/4” Female Garden Hose Inlet

PART NO. TEEJET NO. DESCRIPTION 700-130 AA12A-6 16” Length700-131 AA12-6 20” Length700-132 AB12A Repair Parts Kit700-133 CP5871BU Tip Gasket

2 Series: Same as 12 series except uses hardened stainless steel nozzles insteadof orifice disc. 3/4” Female Garden Hose Inlet. Available in brass and aluminum con-struction.

PART NO. TEEJET NO. DESCRIPTION 700-140 2AAL45 15” Aluminum700-141 2AL45 20” Aluminum700-142 245 24” Brass700-143 AYHSS45 No. 45 SS Nozzle

143 Series: Lightweight Aluminum Standard Duty Spray Gun that has approximately thesame performance as the 12 series. Supplied with No. 6 stainless steel orifice disc.Female Garden Hose Inlet. Weight only 1 1/4 lbs.PART NO. TEEJET NO. DESCRIPTION 700-13 143ALGH6 22 1/4” Aluminum700-1327 CP1325AL AluminumCap for tip700-5005 D-6 No.6 Stainless orifice700-6085 CP4743NY Nylon gasket for cap700-6009 CP10566AL Aluminum Nozzle Housing700-6032 AB143AL Repair Parts Kit


499

PUM

PS & SPR

AYE

QU

IPME

NT

Directovalve Solenoid-Operated

DIRECTO VALVES2-WAY ELECTRICALLY OPERATED

SOLENOID VALVESDirect acting large internal flow chamber without pilot hole reduces chance of clogging. Stainlesssteel wetted parts provide additional corrosion resistance. 12 V DC system. Max pressure 100PSI. Solenoid coil can be changed without removing valve from system. Valves are designed forremote on-off boom control.

10 GPM flow with only 5 PSI pressure dropTwo ¾” NPTF inlet connections- ½” NPTF outletAdjustable solenoidEPDM seat washer and diaphragm standard- also available in VitonMAP NO. TEEJET NO. DESCRIPTION 700-401 144A1 Single valve with EPDM seat/diaphragm700-405 144A3 Triple valve with EPDM seat/diaphragm700-407 144A3VI Triple valve with Viton seat/diaphragm

10 GPM flow with only 5 PSI pressure dropTwo ¾” NPTF inlet connections- ½” NPTF outletSolenoid requires no adjustmentHeavy duty stainless steel coilViton seat washer and diaphragmEasy slide-on mount using hex boltMAP NO.700-495

15 GPM flow with only 5 PSI pressure drop1” Inlet and outlet portsFiberglass reinforced nylon bodyCan be ganged with other 145H valvesHeavy DutyMAP NO.700-406

3-WAY ELECTRICALLY OPERATED METERED BY-PASS VALVEAutomatically maintains system pressure when one or more boom sections are shut offFor pressures up to 65 PSI8 GPM at only 5 PSI pressure dropEPDM seat washer and diaphragm¾” Flow thru connections with ½” outlet to spray lineMAP NO.700-408 144A1-3

Model 144A

Model 144P

Model 145H-1

114AI

144A3144A3VI

144P

145H-1

144A1-3

500


PUM

PS &

SPR

AYE

QU

IPM

EN

T

DIRECTOVALVE CONTROL VALVE REPAIR PARTSTEEJET NO.

AB144-1AB144-1VIAB144A-1

AB144A-1VIAB144P-1AB145-HAB145-VI

CP14801-PPCP14801-NY

CP14802-EPRCP14818-EPRCP154818-VICP15163-NYBCP36101-EPRCP36101-VI

CP18605-NYBCP186011-NYB

DESCRIPTIONRepair Parts Kit for 144-1 EPDM (Old Style)Repair Parts Kit for 144-1 VITON (Old Style)Repair Parts Kit for 144A-1 EPDM Repair Parts Kit for 144A-1VI VITONRepair Parts Kit for 144A-1VP VITONRepair Parts Kit for 145H-1 EPDMRepair Parts Kit for 145H-1 VITONPOCU Valve Body for 144 & 144ACoil Assembly for 144Seat Washer for 144 & 144AEPDM Rubber Diaphragm for 144VITON Rubber Diaphragm for 144COIL Assembly for 144AEPDM Diaphragm for 144A (2 Required)VITON Diaphragm for 144A (2 Required)Coil Assembly for 145Nylon Body for 145

PART NO.700-404700-415700-414700-416700-417700-418700-409700-445700-446700-448700-449700-450700-447700-452700-453700-458700-457

SWIVELCONNECTORS

NO. 4676 TEEJETOUTLETADAPTERSPART NO.

700-28700-29

MATERIAL OUTLET CONN. N.P.T. (F)

BRASS 1/4"NYLON 1/4"

FREE-SWIVELING,LEAK PROOFCONNECTORS.

PART NO. SIZE700-26 1/4" FEMALE

X 3/8" HOSE BARB

NYLON PRESSURE RELIEF VALVEDESCRIPTIONNylon pressure relief valve with brass T-handle and stainlesssteel spring. 0-250 psi. 3/4" NPT male and female ports.

PART NO.700-6160

FITS THE OUTLETS OF

TEEJET NOZZLE BODIES...

AS WELL AS THE OUTLETS

OF NO. 23 AND 31 GUNJETS

AND TRIGGER TEEJET

VALVES. REPLACES 1325

TEE-JET CAP. USED FOR

ATTACHING DROP PIPES TO

NOZZLES...OR EXTENSIONS

TO SPRAY GUNS.

110 SERIES PISTON TYPE PRESSURE RELIEF VALVES• Ductile iron construction• Removable bonnet for servicing unit

without removing valve from line• 1" or 1 ¼" pipe connection• 150 P.S.I. max pressure

PART NO. TEEJET NO. SIZE700-533 1101D1 1"700-534 110114D1 1 ¼"

Directovalve Control Valves Repair Parts


501

PUM

PS & SPR

AYE

QU

IPME

NTTHROTTLING VALVES

For regulating flow in systemsequipped with centrifugal pumps wheresensitive regulation is required, or tocontrol flow in jet agitation lines.Pressures to 150 psi.

PART NO.700-528

700-529

DESCRIPTION1/2" POLYTHROTTLING VALVE3/4" POLYTHROTTLING VALVE

TEEJET NO.23520-1/2

6GPM MAX23520-3/4

18GPM MAX

Sprayer Control KitsThrottling Valves

MODEL 17 Y TEEVALVESelective control of 3-section boomsprayers at pressures to 300 P.S.I.• ¾" Side connection for by-pass and pressure relief

valve or spray gun.• Valve used to open any of 3-boom section lines in

any combination.• ¾" or 1" inlet- three ¾" outlets.• Aluminum construction with stainless steel and

plastic internal parts for maximum corrosion resistance.

PART NO. TEEJET NO. DESCRIPTION700-312 AA17L ¾" Inlet w/ ¾" Outlets700-324 AA17Y 1" Inlet w/ ¾" Outlets700-325 AB17 Parts Repair Kit 700-326 CP12126AL Alum. Cover Plate700-327 CP121281ZP Selector Shield700-328 CP68491ZP Selector Handle

Pressure to 150 P.S.I. 12 G.P.M.at 5 P.S.I.• Molded corrosion-resistant materials

of polypropylene, stainless steel& polyethylene

• Molded-in mount• ¼" NPT gauge port• Can be multiple-configured by using

¾" hex nipplesPART NO. TEEJET NO. DESCRIPTION700-391 6B Directo Valve700-382 CP36301NY Nylon Handle700-392 AB6B Parts Repair Kit

MODEL 6B

MODEL 12795 THROTTLING VALVE-BRASS

MODEL 12690 THROTTLING VALVE-NYLON

MODEL 344AE-2 ELECTRIC BALL VALVE

These nylon valves provide smooth regulationand shut-off control. Work with teejet sprayercontrollers and other 12V systems.• Maximum pressure 300 P.S.I.• Available ¾" or 1" NPT female connections• 5 P.S.I. pressure drop at 12 G.P.M.• 1 Amp power consumptionPART NO. TEEJET NO. DESCRIPTION700-428 344AE-234 ¾" NPT- Valve700-429 344AE-21 1" NPT-Valve700-426 344AEC-234 ¾" NPT- Valve-*700-427 344AEC-21 1" NPT-Valve-*700-424 344AE-2-PR1 1" NPT-Valve-**700-203 AB344AE Repair Kit for

344 Valves

* Compatible with all sprayer controls** Pressure regulating design

Same application as 23520except brass constructionand 1" NPT connections.Maximum flow rate of 116GPM at 40 P.S.I.

PART NO. TEEJET NO.700-531 12795-1

Same application as 23520except nylon construction.Maximum flow rate of 82 GPM.

PART NO. TEEJET NO. DESCRIPTION700-530 1269034NY Valve700-532 AB12690 Repair Kit

MODEL 344AE

MODEL 23520

MODEL12795

MODEL1269034NY

502


PUM

PS &

SPR

AYE

QU

IPM

EN

TRelief Valves

PISTON TYPEPRESSURE RELIEF/REGULATING VALVES

TYPE 8600 NYLONSINGLE SWIVEL NOZZLE

NYLON

BRASS

MODEL 6815

• BRASS WITH STAINLESSSTEEL SPRINGS

• CHOICE OF 1/2" OR 3/4" NPT (M) INLETAND (F) OUTLET CONNECTIONS.

TYPE 4202DOUBLE SWIVEL NOZZLE

TYPE 5000SINGLE SWIVEL NOZZLE

244-3/4 remote control electricRegulating valve. Providesremote pressure control. For 12vdc system. When wide open,pressure loss of only 1 PSI for20 gpm flow. Max. Pressure 100PSI. Good corrosion resistance.Wetted parts are stainless steel,nylon, celcon and viton. 3/4" npt(f) conn. Low current draw...Normally less than 0.1

RELIEF VALVES

TEEJET NO.244C

AB244C-Repair Kit

PART NO.700-441700-442

SWIVEL CONNECTORSFOR USE WITH ALL INTERCHANGEABLE

SPRAY TIPS

TYPE 8600-2 NYLONDOUBLE SWIVEL NOZZLE

DESCRIPTIONSINGLE

DOUBLE

PART NO. 700-1054

700-1053

INLET1/4" FPT

1/4" FPT

OUTLETTEEJETTHREADTEEJETTHREAD

TEEJET NO. 5000-14T

4202-214T

PART NO.

700-1062

700-1064

DESCRIPTION

SINGLE

DOUBLE

INLET

1/4" FPT

1/4" FPT

OUTLET

TEEJETTHREAD

TEEJETTHREAD

TEEJET NO.

860014TNYB

8600214TNYB

DIAPHRAGM TYPEPRESSURE RELIEF/REGULATING VALVES

MODEL 8460NYLON INLET BODY WITH ALUMINUMBONNET. CHOICE OF 1/2" OR 3/4" NPT (M)INLET AND (F) OUTLET CONNECTIONS.FLOW RATES AT 56 GPM FOR 1/2" SIZEAND TO 70 GPM FOR 3/4" SIZE. PRESSURES TO 50 AND 300 P.S.I.

SPLIT EYELET SPRAY NOZZLES

MODEL 244C

PART NO. TEEJET NO. DESCRIPTION700-451 6815-12-300 ½"- 300 PSI Valve700-454 6815-34-300 ¾"- 300 PSI Valve700-456 6815-34-700 ¾"- 700 PSI Valve700-6023 AB6815300 Repair Kit for Brass- 300 PSI700-6025 AB6815700 Repair Kit for Brass- 700 PSI700-6024 AB6815AL300 Repair Kit for Alum- 300 PSI

PART NO. TEEJET NO. DESCRIPTION700-471 846012 ½" Nylon-Alum Valve700-472 846034 ¾" Nylon-Alum Valve700-476 CP836134NY ¾" Nylon Body700-477 CP836112NY ½" Nylon Body700-473 AB8460 Parts Repair Kit

Fast, easy way to mount spray nozzlesto wet booms. Available for mounting on½", ¾", or 1" dia. pipe.PART NO. TEEJET NO. BOOM SIZE MATERIAL700-1101 742112T ½" Brass700-1105 742134T ¾" Brass700-1109 74211T 1" Brass700-1110 742112TNYB ½" Nylon700-1111 742134TNYB ¾" Nylon700-1112 74211TNYB 1" Nylon700-1119 CP7418BU BUNA-N Gasket

23120 SERIESPiston type pressure relief/ regulatingvalve Bypasses excess liquid. Adjustableto maintain control of line pressure.Locknut firmly holds pressure setting.Handles large flows.• Stainless steel spring• Excellent chemical resistance• ¼" Port for pressure gauge• Polypropylene constructionPART NO. TEEJET NO. SIZE700-535 2312012PP ½"700-536 2312034PP ¾"

BYPASSES EXCESS LIQUID. CHOICE OF 1/2" AND3/4" NPT SIZES. CHEMICAL RESISTANT IAPHRAGMSEALS OFF OPERATING PARTS FROM CONTACTWITH CHEMICALS. REMAINS RESILIENT FOR CHAT-TER-FREE, RESPONSIVE PRESSURE CONTROL.


503

PUM

PS & SPR

AYE

QU

IPME

NT

NOZZLE BODIES

TYPE-TTMALE INLETCONNECTION

THE 1/4TT AND 1/4T TEEJET NOZZLES HAVE 1/4" NPT INLET CONNECTIONS.

HOSE SHANK NOZZLESWITH LOCKNUT

TYPE - TFEMALE INLETCONNECTION

NOZZLE CAPS

BRASSDOUBLE HOSECONNECTION

SINGLE HOSECONNECTION

SOLD IN QUANTITIES OF 5

HOSE SIZE1/4”3/8"3/8"1/2"1/2"

PART NO.700-1169700-1142700-1152700-1143700-1153

STYLESTELLTEEELLTEE

TEEJET. NO.154272966471-4006472-4009191A-5319192A-531

6471A9191A

6472A9192A

8121-NY12201

8120-NY12202)

PART NO.

700-1302700-1303700-1307

TEEJETBODY NO.

13228028-NY1340

FOR TEEJETNOZZLE TYPE1/4TT1/4TT-NY1/2 TT

MALE NPTSIZE14"1/4"1/2"

MATERIAL

BRASSNYLONBRASS

TEEJETBODY NO.

1335132112094-NYB

FOR NOZZLETYPE

1/8T1/4T1/4T

PART NO.

700-1310700-1311700-1312

FEMALENPT SIZE

1/8" BRASS1/4" BRASS1/4" NYLON

MATERIALBRASSSTAINLESS STEELNYLONNYLONBRASS

PART NO.700-1325700-1331700-1326700-1332

*700-1333

TEEJET CAP NO.13251325-SS8027-NY18032A-NYB1333

700-1325700-1326700-1331700-1333

FITS ALLTEEJETBODIES

700-1332

*FOR CERAMIC TIPS

SOLD IN QUANTITIES OF 5.

NO.111SQNO. 111

TEEJET NO.111-1/2111-3/4111-1

111-1 1/4111SQ-1

111-SQ 1 1/4111-SQ 1 1/2

FITS TUBE SIZE1/2"RD3/4"RD1"RD

1 1/4"RD1" SQ

1 1/4" SQ1 1/2" SQ

PART NO.700-1001700-1002700-1003700-1004700-1006700-1007700-1008

Teejet-Hose Shank NozzlesNozzle Bodies

Nozzle Caps

PLUG TIPSNO. 3942 PLUG TIP...TO TEMPORARILY SHUTOFF SELECTED NOZZLES, MERELY BY REPLACINGSPRAY TIPS WITH THESE PLUG TIPS. EASY, QUICKWAY TO CHANGE SPACING OF OPERATING NOZZLESON BOOM. SOLD IN QUANTITIES OF 5.

CLAMP SUB-ASSEMBLIES FOR VARI-SPACING NOZZLES. CONSIST OF UPPER AND LOWER

CLAMPS AND BOLT.

15427296

NYLON

PART NO. HOSE SIZE STYLE TEEJET NO.700-1170 3/8" ST 12670406TD700-1165 3/8" TEE 8120NY406TD700-1166 ½" TEE 8120NY540TD700-1161 3/8" ELL 8121NY406TD700-1162 ½" ELL 8121NY540TD700-1190 ¾" ELL 12201CE785TD700-1192 ¾" TEE 12202CE785TD700-1191 1" ELL 12201CE1062TD700-1193 1" TEE 12202CE1062TD804-490 Nylon Replacement Locknut

PLUG TIPSPART NO. TEEJET NO. MATERIAL700-1339 CP3942 Brass700-1340 CP3942SS Stainless

12670406TD

504


PUM

PS &

SPR

AYE

QU

IPM

EN

TStandard Strainers, Teejet Slotted StrainersCheck Valve StrainersHose Drop, Row Applicator

TEEJET SLOTTED STRAINERSONE-PIECE STRAINERS FOR USE WITHLIQUIDS CONTAINING SUSPENDEDSOLIDS.SOLD IN QUANTITIES OF 5.

CHECK VALVE STRAINERS

ROW APPLICATOR

HOSE DROPSFOR USE WITH STANDARD TEEJET

Features:• Arms adjustable for length and angle without

removing bolts; simply loosen• Available with nylon or stainless steel arms• Positioning one arm at proper angle

automatically sets correct angle of second arm• Fits square or round booms up to

1-1/2" diameter• Kit adapts to standard or Quick TeeJet

nozzle bodies• Side nozzle bodies may be rotated• Maximum pressure 125 psi

NO. 4193A TEEJETSTRAINER AND CHECK VALVE

PREVENTS NOZZLE DRIPPING...FITS ALL TEEJETNOZZLES. BALL CHECK OPENS AT 5 OR 10 P.S.I.BRASS OR POLY BODY AND STAINLESS STEELSCREEN- SOLD IN QUANTITIES OF 5

PART NO.700-1351700-1352

DESCRIPTION50 Mesh Screen Only

100 Mesh Screen Only

STANDARD STRAINERSSTRAINER IS THREE PART ASSEMBLYCONSISTING OF BRASS BODY, CAP ANDSTAINLESS STEEL SCREEN. SOLD IN QUANTITIES OF 5.

MESH50

1005050

100

MATERIALBrassBrass

StainlessNylonNylon

PART NO.700-1341700-1342700-1343700-1372700-1373

TEEJET NO.5053-50

5053-1006051-SS-508079-PP-50

8079-PP-100

MESH50

10050

10050

100

MATERIALBrassBrassPolyPolyPolyPoly

PART NO.700-1361700-1362700-1363700-1364700-1365700-1366

TEEJET NO.4193A-5-50SS4193A-5-100SS4193A-PP-5-50SS4193A-PP-5-100SS4193A-PP-10-50SS4193A-PP-10-100SS

PART NO.700-22

MFG. No.23770

PART NO. TEEJET NO. MATERIAL MESH700-1347 4514-10 Brass 50700-1348 4514-20 Brass 25700-1349 4514-32 Brass 16700-1356 4514NY10 Nylon 50700-1357 4514NY20 Nylon 25700-1358 4514NY32 Nylon 16

11/16-16 Teejet inlet x ¼ NPTM outlet

PART NO. TEEJET NO. LENGTH700-4106 21354-15 15"700-4107 21354-24 24"

FITS ALL TEEJET NOZZLES, REPLACING SPRAYTIPS. FOR ATTACHING HOSE TO NOZZLEBODY. TYPE 8400 IS MADE OF NYLON.

NYLONPART NO. SIZE TEEJET NO.700-1114 3/8" 8400-406-NYB700-1027 1/2" 8400-500-NYB

BRASS700-1320 3/8" 4251-375700-1321 1/2" 4251-500

TEEJET HOSE SHANKS


505

PUM

PS & SPR

AYE

QU

IPME

NT

CHEMSAVER DIAPHRAGM CHECK VALVESThese nozzle bodies eliminate pressure drop associated with ball-type checkvalves. Widely used wherever drip-free shutoff is required.Available in brass & nylon- polypropylene materials.

BRASS• Check valve opens at 7 P.S.I.• 11/16” Teejet male thread outlet• 1/8" NPT female inlet• Up to 1.5 GPM flow ratePART NO. TEEJET NO. INLET700-1710 4664B 1/8" NPT female

NYLON• Check valve opens at 10 P.S.I.• 1/8" or ¼" NPT female inlet• 11/16" Teejet male thread outlet• Up to 2.5 GPM flow rate

PART NO. TEEJET NO. INLET SIZE700-1715 835518NYB 1/8" NPT female700-1716 835514NYB ¼" NPT female

NYLON• Check valve opens at 10 P.S.I.• ¼" NPT male inlet• 11/16" Teejet male thread outlet• Up to 2 GPM flow rate

PART NO. TEEJET NO. INLET SIZE700-1720 8360NYB ¼"NPT Male

SPRAYER CONTROL KITSThe 734 and 744 Spraying Systems control kits are designed as completepackages to give the operator easy and accurate control of the sprayer. Kitsinclude controller with long-lasting switches, valves, gauges, and all neces-sary cables and mounting hardware. Additional LED illuminated panel on 744series. Kits are packaged in attractive display carton.

PART NO. TEEJET NO. DESCRIPTION700-430 K73130D No. 734 Controller for 3 Booms with 1

No. 244 Pressure Regulating Valve700-431 K73133D No. 734 Controller for 3 Booms with 3

No. 144 Directo Valves and 1 No. 244 Pressure Regulating Valve

700-432 K74110D No. 744 Controller for 1 Boom with 1 No. 244 Pressure Regulating Valve

700-433 K74110L No. 744 Controller for 1 Boom with 1 No. 244 Pressure Regulating Valve and Liquid Filled Pressure Gauge

700-434 K74130D No. 744 Controller for 3 Booms with 1 No. 244 Pressure Regulating Valve700-436 K74111L No. 744 Controller for 1 Boom with 1 No. 144 Directo Valve, 1 No. 244 Pressure

Regulating Valve, and Liquid Filled Pressure Gauge700-437 K74133L No. 744 Controller for 3 Booms with 3 No. 144 Directo Valves, 1 No. 244

Pressure Regulating Valve, and Liquid Filled Pressure Gauge

REPLACEMENT PARTS FORDIAPHRAGM CHECK VALVESPART NO. DESCRIPTION700-1704 CP4620VI- Diaphragm- 4664B700-1707 CP4620FA- Diaphragm- 4664B700-1701 CP21953EPR- Diaphragm- Nylon Valves700-1706 CP21953VI-Diaphragm- Nylon Valves700-1705 2195010NYB-End Cap Sub Assbly- 10 PSI

Spring- Nylon700-1702 2195010PPB-End Cap Sub Assbly- 10 PSI

Spring- Poly

Diaphram Check Valves

506


PUM

PS &

SPR

AYE

QU

IPM

EN

T

Banjo Polypropylene Switch-A-Roos• The Switch-A-Roo is a fast convenient method of changing

spray nozzles on fertilizer application equipment. • Precision molded in polypropylene (fiberglass reinforced)

for high strength and toughness.• The female coupling is available in either 1/2" or 3/4" pipe

thread and normally mounted on the spray boom.• The male adapter is available in four different thread sizes

1/4", 3/8", 1/2" & 3/4" to fit all size spray nozzles. • Switch-A-Roos available with self-aligning grooves.

MAP No. Mfg.No. Description314-5673 75A-1/4SA 3/4" Male Adapter-1/4" w/Self-Aligning Groove314-5674 75A-3/8SA 3/4" Male Adapter-3/8" w/Self-Aligning Groove314-5675 75A-1/2SA 3/4' Male Adapter-1/2" w/Self-Aligning Groove314-5676 75A-3/4SA 3/4" Male Adapter-3/4" w/Self-Aligning Groove314-5677 75A-1/4 3/4" Male Adapter-1/4" Female Thread314-5678 75A-3/8 3/4" Male Adapter-3/8" Female Thread314-5679 75A-1/2 3/4" Male Adapter-1/2" Female Thread314-5680 75A-3/4 3/4" Male Adapter-3/4" Female Thread314-5681 75B-1/2 3/4" Female Coupler- 1/2" Male Thread314-5682 75B-3/4 3/4" Female Coupler- 3/4" Male Thread

Polypropylene Switch-A-Roo


507

PUM

PS & SPR

AYE

QU

IPME

NT

• Uniform coverage at lower pressures

• Smaller droplets at high pressures for thorough coverage

• Nozzle spacing - 20 inches• Spraying pressure - 15-60 p.s.i.

• Good spray penetration• Uniform coverage along boom• Nozzle spacing - 20 inches• Spraying pressure - 30-60 p.s.i.

• Uniform coverage along boom• Pre-orifice design produces

large droplets to reduce drift• Nozzle spacing - 30-40 inches• Spraying pressure - 10-40 p.s.i.

• Ideal for banding herbicides & insecticides with 3 nozzles over the row

• Small droplets• Spraying pressure - 40-60 p.s.i.

• Ideal for banding over the row or in row middles

• Uniform coverage across spray pattern

• Spraying pressure - 20-40 p.s.i.

• Less clogging• Larger droplets at low

pressures• Nozzle spacing - 40 inches• Spraying pressure - 10-25 p.s.i.

-- SEE CHART ON NEXT PAGE FOR SPRAY TIP SELECTION --

• Large round free passages to minimize clogging• Excellent to use with automatic sprayer controls• Excellent spray pattern quality• Unequalled drift control from 15-90 PSI (1-6 bar)

• Large, air-filled drops• Larger droplets for less drift• Uniform coverage in broadcast spraying• Nozzle spacing - 20 inches (50 cm)• Spraying pressure - 30-100 PSI (3-8 bar)

Spray Tip Chart

508


PUM

PS &

SPR

AYE

QU

IPM

EN

TSpray Tip Selection Chart

XR TEEJETEXTENDED RANGE FLAT TIP

TEEJETSTANDARD FLAT SPRAY TIP

TURBO FLOODJETWIDE ANGLE FLAT SPRAY TIP

FLOODJETWIDE ANGLE FLAT SPRAY TIP

TEEJETEVEN FLAT SPRAY TIP

CONEJETHOLLOW CONE SPRAY TIP

TURBO TEEJETWIDE ANGLE FLAT SPRAY TIP

AI TEEJETAIR INDUCTION SPRAY TIP

PRE-EMERGE

EXCELLENT

GOOD

EXCELLENT

EXCELLENT

EXCELLENT

EXCELLENT

HERBICIDESSOILINCORPORATED

GOOD

EXCELLENT

GOOD

EXCELLENT

EXCELLENT

CONTACT

GOOD

GOOD

GOOD

EXCELLENT

GOOD

SYSTEMIC

EXCELLENT

GOOD

EXCELLENT

EXCELLENT

EXCELLENT

POST-EMERGE BANDSPRAY TIPSELECTION CHART

CONTACT

EXCELLENT

GOOD

GOOD

GOOD

GOOD(AT MEDIUM PRESSURE)

SYSTEMIC

EXCELLENT

EXCELLENT

EXCELLENT

EXCELLENT

EXCELLENT

CONTACT

GOOD

GOOD

EXCELLENT

GOOD(AT MEDIUM PRESSURE)

SYSTEMIC

EXCELLENT

EXCELLENT

EXCELLENT

EXCELLENT

EXCELLENT

GROWTHREGULATORS

GOOD

FUNGICIDES INSECTICIDES

XR TEEJETEXTENDED RANGE FLAT TIP

TEEJETSTANDARD FLAT SPRAY TIP

TURBO FLOODJETWIDE ANGLE FLAT SPRAY TIP

FLOODJETWIDE ANGLE FLAT SPRAY TIP

TEEJETEVEN FLAT SPRAY TIP

CONEJETHOLLOW CONE SPRAY TIP

TURBO TEEJETWIDE ANGLE FLAT SPRAY TIP

AI TEEJETAIR INDUCTION SPRAY TIP


509

PUM

PS & SPR

AYE

QU

IPME

NT

ALL SPRAY TIPS SOLD IN QUANTITIES OF 5

80° Flat Spray Tips110° Flat Spray Tips

VISIFLOW FLAT SPRAY TIPS

TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001SS 700-2216 TP8005SS 700-2227TP80015SS 700-2223 TP8006SS 700-2228TP8002SS 700-2224 TP8008SS 700-2229TP8003SS 700-2225 TP8010SS 700-2230TP8004SS 700-2226

Flat spray pattern tip with tapered edge for uniform coverage in broadcast spraying.Spray tips packaged in quantities of 5.

Solid Stainless Steel last up to ten times longer than brass.Stocked in 80° (8000 Series)-Discontinued when stock is depleted.

Teejet number designates 1/10 of a gallon output at 40 P.S.I.Example:8001= 1/10 Gallon8010=1 Gallon

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8002VP YELLOW 700-2253 TP11002VP YELLOW 700-2322TP8003VP BLUE 700-2254 TP11003VP BLUE 700-2323TP8004VP RED 700-2255 TP11004VP RED 700-2324TP8005VP BROWN 700-2256 TP11005VP BROWN 700-2325TP8006VP GRAY 700-2257 TP11006VP GRAY 700-2326TP8008VP WHITE 700-2259 TP11008VP WHITE 700-2328

Polymer with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 110° (1100 Series)

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8001VS ORANGE 700-2981 TP11001VS ORANGE 700-2351TP80015VS GREEN 700-2982 TP11002VS YELLOW 700-2353TP8002VS YELLOW 700-2983 TP11003VS BLUE 700-2354TP8003VS BLUE 700-2984 TP11004VS RED 700-2355TP8004VS RED 700-2985 TP11005VS BROWN 700-2356TP8005VS BROWN 700-2986 TP11006VS GRAY 700-2357TP8006VS GRAY 700-2987 TP11008VS WHITE 700-2358TP8008VS WHITE 700-2988

Stainless Steel with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 110° (1100 Series)

510


PUM

PS &

SPR

AYE

QU

IPM

EN

T

Solid Stainless Steel- last up to 10 times longer than brass- stocked in80° (8000 Series). Priced Individually...Sold in Quanities of 5.This series to be discontinued when stock is depleted.

TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001ESS 700-2921 TP8005ESS 700-2926TP8001.5ESS 700-2922 TP8006ESS 700-2927TP8002ESS 700-2923 TP8008ESS 700-2928TP8003ESS 700-2924 TP8010ESS 700-2929TP8004ESS 700-2925

Stainless Steel with Visiflow Color Coding.Stocked in both 80° (8000 Series) and 95° (9500 Series)Priced Individually...Sold in Quanities of 5.

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TP8001EVS ORANGE 700-2941 TP8006EVS GRAY 700-2947TP8001.5EVS GREEN 700-2942 TP8008EVS WHITE 700-2948TP8002EVS YELLOW 700-2943 TP9501.5EVS GREEN 700-3023TP8003EVS BLUE 700-2944 TP9502EVS YELLOW 700-3024TP8004EVS RED 700-2945 TP9503EVS BLUE 700-3025TP8005EVS BROWN 700-2946

80° Flat Spray Tips95° Flat Spray Tips110° Flat Spray Tips

Solid Brass- Stocked in 25° (2500 Series), 80° (8000 Series), 95° (9500Series), and 110° (1100 Series).

TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP2502 700-2054 TP9502 700-2443TP2503 700-2055 TP9503 700-2444TP800050 700-2215 TP9504 700-2445TP8001 700-2202 TP9505 700-2446TP80015 700-2203 TP9506 700-2447TP8002 700-2204 TP9508 700-2448TP8003 700-2205 TP11001 700-2302TP8004 700-2206 TP11002 700-2304TP8005 700-2207 TP11003 700-2305TP8006 700-2208 TP11004 700-2306TP8008 700-2209 TP11005 700-2307TP8010 700-2210 TP11006 700-2308TP9501 700-2441 TP11008 700-2309

VISIFLOW FLAT SPRAY TIPS

VISIFLOW EVEN SPRAY TIPS


511

PUM

PS & SPR

AYE

QU

IPME

NT

Visiflow EvenDrift Guard

VISIFLOW EVEN SPRAY TIPS

Solid Brass- stocked in 80° (8000 Series) and 95° (9500 Series).

TEEJET NO. MAP NO. TEEJET NO. MAP NO.TP8001E 700-2901 TP8010E 700-2909TP8001.5E 700-2902 TP9501E 700-3002TP8002E 700-2903 TP9502E 700-3003TP8003E 700-2904 TP9503E 700-3004TP8004E 700-2905 TP9504E 700-3005TP8005E 700-2906 TP9505E 700-3006TP8006E 700-2907 TP9506E 700-3007TP8008E 700-2908 TP9508E 700-3008

DRIFT GUARD SPRAY TIPS

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.DG8001.5VS GREEN 700-2281 DG9503EVS BLUE 700-2314DG8002VS YELLOW 700-2282 DG9504EVS RED 700-2315DG8003VS BLUE 700-2283 DG11001.5VS GREEN 700-2289DG8004VS RED 700-2284 DG11002VS YELLOW 700-2290DG8005VS BROWN 700-2285 DG11003VS BLUE 700-2291DG9501.5EVS GREEN 700-2312 DG11004VS RED 700-2292DG9502EVS YELLOW 700-2313 DG11005VS BROWN 700-2293

Stainless Steel Core-VisiFlow Color-Coded BodyTips produce large droplets to reduce drift. Tapered edge flat spray pat-tern. Color-coded pre-orifice is removable for cleaning operation.Stocked in 80° and 110° flat spray pattern and 95° even spray pattern.

512


PUM

PS &

SPR

AYE

QU

IPM

EN

T

Ceramic Core- Visi-Flow Color-Coded Body• Excellent spray distribution over a wide range of pressures (15-60 PSI)• Ideal for rigs equipped with sprayer controllers• Reduces drift at lower pressures- better coverage at higher pressures

TEEJET NO. COLOR MAP NO.XR8003VK BLUE 700-2233XR8004VK RED 700-2234XR8005VK BROWN 700-2235XR8006VK GRAY 700-2236XR8008VK WHITE 700-2237

"XR" EXTENDED RANGE FLATSPRAY TIPS CERAMIC CORE

Stainless Steel CoreVisi-Flow Color-Coded Body• Excellent spray distribution over a wide range of pressures (15-60 PSI)• Ideal for rigs equipped with sprayer controllers• Reduces drift at lower pressures- better coverage at higher pressures

"XR" EXTENDED RANGE FLAT SPRAY TIPS

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.XR8001VS ORANGE 700-2240 XR11001VS ORANGE 700-2341XR80015VS GREEN 700-2241 XR110015VS GREEN 700-2342XR8002VS YELLOW 700-2242 XR11002VS YELLOW 700-2343XR8003VS BLUE 700-2243 XR11003VS BLUE 700-2344XR8004VS RED 700-2244 XR11004VS RED 700-2345XR8005VS BROWN 700-2245 XR11005VS BROWN 700-2346XR8006VS GRAY 700-2246 XR11006VS GRAY 700-2347XR8008VS WHITE 700-2247 XR11008VS WHITE 700-2348

“XR” Extened Range Flat Stainless Steel“XR” Extened Range Flat Ceramic Core


513

PUM

PS & SPR

AYE

QU

IPME

NT

Wide Angle Flat Spray Tips-Excellent tips for broadcast spraying due to widedeflector type spray pattern. Available in solid brass (TK Series), solid stainlesssteel (TKSS Series) and stainless steel with color-coded body (TKVS Series).

FLOODJET SPRAY TIP

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TK1 BRASS 700-3103 TKSS2.5 STAINLESS 700-3126TK1.5 BRASS 700-3104 TKSS3 STAINLESS 700-3127TK2 BRASS 700-3105 TKSS4 STAINLESS 700-3128TK2.5 BRASS 700-3106 TKSS5 STAINLESS 700-3129TK3 BRASS 700-3107 TKSS7.5 STAINLESS 700-3130TK4 BRASS 700-3108 TKSS10 STAINLESS 700-3131TK5 BRASS 700-3109 TKSS15 STAINLESS 700-3135TK7.5 BRASS 700-3110 TKVS2 RED 700-3165TK10 BRASS 700-3111 TKVS2.5 BROWN 700-3166TK15 BRASS 700-3115 TKVS3 GRAY 700-3167TK20 BRASS 700-3119 TKVS4 WHITE 700-3168TKSS1 STAINLESS 700-3123 TKVS5 BLUE 700-3169TKSS1.5 STAINLESS 700-3124 TKVS7.5 GREEN 700-3170TKSS2 STAINLESS 700-3125 TKVS10 BLACK 700-3171

Wide Angle Flat Spray Tip• Excellent spray distribution for uniform coverage along the boom• Nozzle design incorporates pre-orifice to produce larger droplets for less drift• Large round orifice reduces clogging• Stocked Stainless Steel with color-coding (Series TFVS) and Polymer with

color-coding (Series TFVP)

TURBO FLOODJET SPRAY TIP

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TFVS2 RED 700-3185 TFVP2 RED 700-3192TFVS2.5 BROWN 700-3186 TFVP2.5 BROWN 700-3193TFVS3 GRAY 700-3187 TFVP3 GRAY 700-3194TFVS4 WHITE 700-3188 TFVP4 WHITE 700-3195TFVS5 BLUE 700-3189 TFVP5 BLUE 700-3196TFVS7.5 GREEN 700-3190 TFVP7.5 GREEN 700-3197TFVS10 BLACK 700-3191 TFVP10 BLACK 700-3198

Floodjet TiipTurbo Floodjet Tip

514


PUM

PS &

SPR

AYE

QU

IPM

EN

T

Wide Angle Flat Spray Tips• Tapered edge wide angle flat spray pattern for uniform coverage in

broadcast spraying• Large round passage for less clogging• Excellent resistance to corrosive solutions• Large droplets for less drift• Polymer body with color-coding

TURBO JET SPRAY TIP

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TT11001VP ORANGE 700-2371 TT11004VP RED 700-2375TT11001.5VP GREEN 700-2372 TT11005VP BROWN 700-2376TT11002VP YELLOW 700-2373 TT11006VP GRAY 700-2377TT11003VP BLUE 700-2374 TT11008VP WHITE 700-2379

Stainless Steel with VisiFlow Color-Coding• Stainless steel insert produces tapered edge flat spray pattern for uniform

coverage in broadcast spraying• Larger droplets for less drift• Depending on chemical, produces large air-filled drops through the use of a venturi

air aspirator

“AI” AIR INDUCTION TIPS

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.AI11001.5VS GREEN 700-2381 AI11004VS RED 700-2385AI11002VS YELLOW 700-2382 AI11005VS BROWN 700-2386AI11002.5VS TURQUOISE 700-2383 AI11006VS GRAY 700-2387AI11003VS BLUE 700-2384 AI11008VS WHITE 700-2388

“AI” Air Induction TipsTurbo Jet Tip


515

PUM

PS & SPR

AYE

QU

IPME

NT

TWINJET TIPS

TWINJETTwin Flat Spraytips- Stainless Steel with Color-Coding• Penetrates crop residue or dense foliage• Smaller droplets for thorough coverage• Better spray distribution along boom than with hollow cone nozzles

TEEJET NO. COLOR MAP NO.TJ608002VS YELLOW 700-1888TJ608003VS BLUE 700-1889TJ608004VS RED 700-1890TJ608006VS GRAY 700-1891

Hollow Cone Spray Tips• Ideal for banding with two or three nozzles over the row• Finely atomized spray pattern provides thorough coverage. Available in Poly body

with ceramic orifice (Series TXVK), Poly body with stainless steel orifice (Series TXVS) and Solid Brass (Series TX)

CONEJET SPRAY TIP

TEEJET NO. COLOR MAP NO. TEEJET NO. COLOR MAP NO.TXVK4 GREEN 700-3670 TXVS26 LT BLUE 700-3658TXVK6 RED 700-3671 TX1 BRASS 700-3601TXVK8 GRAY 700-3672 TX1.5 BRASS 700-3613TXVK10 BLACK 700-3673 TX2 BRASS 700-3602TXVK12 BROWN 700-3674 TX3 BRASS 700-3603TXVK18 ORANGE 700-3675 TX4 BRASS 700-3604TXVS1 DK BLUE 700-3648 TX5 BRASS 700-3605TXVS2 WHITE 700-3649 TX6 BRASS 700-3606TXVS3 YELLOW 700-3650 TX8 BRASS 700-3607TXVS4 GREEN 700-3651 TX10 BRASS 700-3608TXVS6 RED 700-3652 TX12 BRASS 700-3609TXVS8 GRAY 700-3653 TX14 BRASS 700-3610TXVS10 BLACK 700-3654 TX18 BRASS 700-3611TXVS12 BROWN 700-3655 TX22 BRASS 700-3614TXVS18 ORANGE 700-3657 TX26 BRASS 700-3612

Twinjet TipsConejet Tips

516


PUM

PS &

SPR

AYE

QU

IPM

EN

T

Flat Spray TipsMostly used in double and single swivel nozzle bodies to obtainwide spray swath. Internally threaded for use with eitherthreaded or flanged strainers. Solid brass material.

OFFCENTER SPRAY TIP

TEEJET NO. MAP NO. TEEJET NO. MAP NO.OC-01 700-2011 OC-08 700-2005OC-02 700-2013 OC-10 700-2002OC-03 700-2014 OC-20 700-2003OC-04 700-2015 OC-40 700-2004OC-06 700-2007 OC-80 700-2006

LIVESTOCK COOLING TIPS

WIDE ANGLE FULL CONE SPRAY TIPSUsed on spray rigs with sprayer controllers.Feature large droplets to reduce drift and widespray angle to allow use on 40" spacings.Stainless steel with Visiflo color coding.

FULLJET SPRAY TIP

TEEJET NO. COLOR MAP NO.FL5VS BROWN 700-3400FL65VS GRAY 700-3401FL8VS WHITE 700-3402FL10VS LT BLUE 700-3403

Tip designed for a fine mist (2 gallons per hour) at standardnozzle pressure of 40 PSI for cooling of livestock.

PART NO. TEEJET NO.700-3641 T2W

Livestock Cooling TipsOffcenter TipsFulljet Tips

All Priced Individually...Sold in Quanities of 5.


517

PUM

PS & SPR

AYE

QU

IPME

NT

25° Brass TipsBrass Cores, Orifice Discs

Ceramic Cores, Ceramic Orifice Discs, Stainless Steel Orifice Discs

TYPE DSTANDARD TYPE D

ORIFICE DISC MADEOF HARDENED STAINLESS

STEEL.STANDARD CORES ARE MADE

OF BRASS. ALL CORES AREMADE WITH REAR "NIBS"...BE SURE CORE IS ALWAYS

PLACED WITH THE "NIB" FACINGTHE NOZZLE BODY.

BRASS CORESORIFICE DISCS


PART NO.700-5101700-5102700-5103700-5106700-5107700-5108

CORE SIZEDC-13DC-23DC-25DC-45DC-46DC-56

PART NO.700-5000700-5001700-5002700-5003700-5004700-5005700-5006700-5007700-5008700-5009700-5010700-5019

Core SizeD-1D-2D-3D-4D-5D-6D-7D-8

D-10D-12D-14D-16

CERAMIC ORIFICE DISCS

CERAMIC CORES

STAINLESS STEELORIFICE DISCS

STANDARD TYPED ORIFICE DISC


PART NO.700-5150700-5152700-5153700-5156700-5157700-5158

CORE SIZEDC13-CERDC23-CERDC25-CERDC45-CERDC47-CERDC56-CER

CORE SIZEDCER-2DCER-3DCER-4DCER-5DCER-6DCER-8

DCER-10

PART NO.700-5011700-5012700-5013700-5014700-5015700-5017700-5018


MFG NO.4916-1034916-374916-494916-78

PART NO.700-5256700-5221700-5230700-5246

700-5000

NYLON CORESSOLD IN QUANTITIES OF 5

PART NO.700-5120700-5121700-5122700-5123700-5124700-5125

CORE SIZEDC13-NYDC23-NYDC25-NYDC45-NYDC46-NYDC56-NY

518


PUM

PS &

SPR

AYE

QU

IPM

EN

T

TYPE 5880 BOOMJET NOZZLES COMBINE TWO OFF-CENTER TIPSAND THREE VEEJET NOZZLES TO PRODUCE AN OVERALL WIDESWATH FLAT SPRAY. NOZZLE ASSEMBLY PROVIDES GOOD DISTRIBU-TION FOR THE WIDE PATTERN COVERAGE OBTAINED. SUPPLIEDWITH ONE ADDITIONAL 1/4" NPT PIPE PLUG AND ONE BLANK TIP... FOREACH SETTING BOOMJET TO SPRAY TO ONE SIDE ONLY. TYPE 5880ALSO HAS A 1/4" NPT PRESSURE GAUGE PORT.

TYPE 5880-3/4" NPT FEMALEBACK INLET CONNECTION.

WEIGHTS: BRASS 2 POUNDS.

PARTNO.

700-101

700-102

700-103

700-104

OCTIPS(TWO)

OC06

OC10

0C20

0C40

VEEJET TOPNOZZLES(TWO)

H1/4VV-1506

H1/4U-0508HE

H1/4U-0520HE

H 1/4 U-0540HE

VEEJETBOTTOMNOZZLEH1/4VV-9502WITH 50 MESHSTRAINERH1/4VVL-11004WITH 50 MESHSTRAINERH1/4VVL-9506WITH 50 MESHSTRAINER

H1/4U9510

LIQUIDPSI

203040203040203040203040

TOTALCAPACITY

GPM1.82.32.32.83.54.06.17.48.6

12.014.717.0

GALLONS PER ACRE"W"FEET33 1/23434 1/239 1/24040 1/2475052566063

4MPH6.88.29.38.910.712.216.018.420273033

5MPH5.46.67.57.18.69.812.814.716.414.216.217.8

7.5MPH3.54.45.04.75.76.58.59.810.914.216.217.8

10MPH2.73.33.73.54.34.96.47.48.210.612.113.4

15MPH1.82.22.52.42.93.34.34.95.57.18.18.9

BOOMJETNOZZLE NO.

5880-3/4-2TOCO6

5880-3/4-2TOC10

5880-3/4-2TOC20

5880-3/4-2TOC40

BOOMLESS NOZZLESA popular nozzle. Just screw it into a pieceof pipe and hook in a quickacting valve,and you have a spray for tractor, or truckthat will cover a strip up to 56 feet wide.Provides even thorough spray distribution.Fitted with 2 caps, one for 180 and one for90. To change from one spray pattern tothe other, simply take out two screws, andinterchange caps.

Operating Data of 180° Tips & Nozzles*

OrificeNo.

#5

#10

#20

Gallons Per Acre

PSI304050603040506030405060

10 MPH1.92.22.32.43.74.24.44.84.75.45.96.1

8 MPH2.42.72.93.04.65.25.55.95.86.87.47.6

5 MPH3.84.34.54.87.38.38.89.59.310.811.812.1

4 MPH4.85.45.75.99.210.410.911.911.613.514.815.1

3 MPH6.47.27.67.912.213.914.615.815.618.019.720.2

Swath180°44'46'48'50'50'50'52'52'54'54'56'58'

GPM180°1.72.02.22.43.74.24.65.05.15.96.77.1

* 90° Tips and Nozzles Have Same GPA but 1/2 GPMand Swath

MATERIALBRASSBRASSBRASS

GPM51020

CONN.1/2" IPT1/2" IPT1/2" IPT

MFG. NO.653065406550DESCRIPTIONBRASS SCREW FOR BOOM-LESS NOZZLE

PART NO.700-191700-192700-193

700-194

Data at 36" height

Boomjet NozzlesReplacement Parts for BoomjetVeejet Top Nozzles, OC Tips + Repairs, Boomless Nozzles

REPLACEMENT PARTS FOR BOOMJET NOZZLESMAP NO. TEEJET NO. DESCRIPTION 700-2001 0C-06 Off center tip for 2T0C06 boomjet700-2002 0C-10 Off center tip for 2T0C10 boomjet700-2003 0C-20 Off center tip for 2T0C20 boomjet700-2004 0C-40 Off center tip for 2T0C40 boomjet700-1338 CP3819 Brass cap for boom jet nozzle700-109 CP4784AL Tip Gasket ( Aluminum-2 Required)700-681 CP2812 1/4” Brass Pipe Plug700-5501 H1/4VV-1506 Top nozzle for 2T0C06 boomjet700-5502 H1/4U-0508HE Top nozzle for 2T0C10 boomjet700-5503 H1/4U-0520HE Top nozzle for 2T0C20 boomjet700-5504 H1/4U-0540HE Top nozzle for 2T0C40 boomjet700-5511 H1/4VV-9502 Bottom nozzle for 2T0C06 boomjet700-5512 H1/4VVL-11004 Bottom nozzle for 2T0C10 boomjet700-5513 H1/4VVL-9506 Bottom nozzle for 2T0C20 boomjet700-5514 H1/4U-9510 Bottom nozzle for 2T0C40 boomjet


519

PUM

PS & SPR

AYE

QU

IPME

NT

Nozzle Bodies

NYLON HOSE SHANKS QUICK TEEJET NOZZLE BODIES


PART NO.700-1441700-1442700-1443700-1444700-1445700-1446700-1447700-1448700-1449

TYPESINGLESINGLESINGLEDOUBLEDOUBLEDOUBLETRIPLETRIPLETRIPLE

MFG. NO.18635-111-406-NYB18638-111-540-NYB18719-111-785-NYB18636-112-406-NYB18639-112-540-NYB18720-112-785-NYB18637-113-406-NYB18640-113-540-NYB18721-113-785-NYB

SIZE3/8"1/2"3/4"3/8"1/2"3/4"3/8"1/2"3/4"

QJ200 SERIES - QUICK TEEJET NOZZLEBODIES WITH CHECK VALVE

PART NO.700-1416700-1419700-1420700-1421700-1422700-1423700-1424700-1425700-1426

TYPESINGLESINGLESINGLE DOUBLEDOUBLEDOUBLETRIPLETRIPLETRIPLE

SIZE3/8"1/2"3/4"3/8"1/2"3/4"3/8"1/2"3/4"

MFG. NO.19349-211-406-NYB19349-211-540-NYB19349-211-785-NYB19350-212-406-NYB19350-212-540-NYB19350-212-785-NYB19351-213-406-NYB19351-213-540-NYB19351-213-785-NYB

HOSE I.D.3/81/2"3/4"3/8"1/2"3/4"

MFG. NO.22251-311-375-NYB22251-311-500-NYB22251-311-750-NYB22252-312-375-NYB22252-312-500-NYB22252-312-750-NYB

PART NO.700-1427700-1428700-1429700-1430700-1431700-1432

QJ300 SERIES

TYPESINGLESINGLESINGLE DOUBLEDOUBLEDOUBLE

Hi-Pressure Quick TeeJet Nozzle Body. Max Pressure 300 psi.

QUICK JET CLAMPSCLAMP SUB-ASSEMBLIES FOR ALL QUICK TEEJET NOZZLE BODIES FOR DRY BOOMS


PART NO.700-1433700-1434700-1435700-1436

SIZE1/2”3/4"1"1 1/4”

ROUND TUBE SIZEQJ111-1/2QJ111-3/4QJ111-1QJ111-1 1/4

FOR USE WITH QUICK TEEJET BODIESHOSE DROPS

INLET CONN.QUICK TEEJET TYPE

HOSE DROP NO.QJ21353-6-15QJ21353-6-24

LENGTH15"24"

PART NO.700-4102700-4103

OUTLET CONN.1/4" NPT(M)

PART NO.

700-1437700-1438700-1439700-1440

SIZE

3/4"1"1 1/4"1 1/2"

SQUARE TUBESIZE

QJ111SQ-3/4QJ111SQ-1

QJ111SQ-1 1/4QJ111SQ-1 1/2

MFG. NO.QJTNYB19191EPR GASKET

ADAPTERSQJT-NYB QUICKTEEJET ADAPTER WITH11/16"-16 TEEJET

THREAD

PART NO.700-1450700-1459

QJT8360-NYB DIAPHRAGMCHECK VALVE QUICK TEEJETBODY SUB-ASSEMBLY FITS TEEJET BODIES WITH 11/16"-16TEEJET THREAD

MFG. NO.QJT8360-NYB20266EPDM GASKET

PART NO.700-1451

*700-1452* SOLD IN QUANTITIES OF 12

SINGLE DOUBLE TRIPLE

SINGLE DOUBLE TRIPLE

SINGLE DOUBLE

520


PUM

PS &

SPR

AYE

QU

IPM

EN

T

SHUT-OFF CAP

PARTS FOR WET BOOM

QUICKJET OUTLETADAPTER

QUICK TEEJET ADAPTERPERMITS USE OF STAN-DARD 1/4" NPT(M) NOZZLESWITH QUICK TEEJET BODYASSEMBLIES. AVAILABLEWITH 1/4" NPT(F) OUTLETCONN. MADE OF CELCONWITH EPDM SEAT GASKET.

QJ 4676-1/4-N



PART NO.700-1616

DESCRIPTIONSHUT-OFF CAP & GASKET

PART NO. SIZE700-1612 1/4"

QJ17560 SPLIT-EYELETDIAPHRAGM CHECK.VALVE QUICK TEEJET

NOZZLE BODY ASSEMBLIES.

MFG NO. TO CLAMP ONQJ17560-1/2-NYB 1/2" PIPEQJ17560-3/4-NYB 3/4” PIPE

PART NO.700-1401700-1402

QJ7421 SPLIT-EYELETQUICK TEEJET NOZZLE

BODY ASSEMBLIES

MFG NO. TO CLAMP ONQJ7421-1/2-NYB 1/2" PIPEQJ7421-3/4-NYB 3/4" PIPEQJ7421-1-NYB 1" PIPE

PART NO.700-1404700-1405700-1406

QJ8600 SWIVEL QUICK TEEJETNOZZLE BODY ASSEMBLIES

DOUBLESINGLE

MFG. NO.QJ8600-1/4-NY

QJ8600-2-1/4-NY

DESCRIPTIONSINGLEDOUBLE

PART NO.700-1417700-1418

Quick Teejet Adapters, Diaphragms for Check ValvesParts for Wet BoomShut-Off Cap, Quickjet Outlet Adapter

TEEJET NO.19843-NYR

QUICKJET DIAPHRAGM NOZZLE BODIES

TEEJET NO.QJ835514-NYB

QJ8360-NYBQJT8360-NYB

CP20266-EPDMCP21953-EPRCP21953-VI

2195010-NYB

DESCRIPTION1/4” Female Thread Inlet1/4” Male Thread Inlet11/16” Female Thread InletEPDM Gasket OnlyRubber Gasket OnlyVITON Gasket OnlyNozzle Body End Cap

PART NO.700-1409700-1410700-1451700-1452700-1701700-1706700-1703

These diaphragm bodies allow use of QuickJet System from 1/4” pipe or 11/16”Teejet thread.Features Chemsaver No-Drip shutoff and EPDM diaphragm.

QUICKJET BODY ADAPTERSPermits use of the QuickjetSystem with 1/4”Male/Female Connectionsand 11/16” Teejet Threads.

TEEJET NO.QJ14TT-NYBQJ14T-NYB

2267414-NYB

DESCRIPTION1/4” Male Thread Adapter1/4” Female Thread Adapter1/4” Female Thread Adapter 45°

PART NO.700-1413700-1457700-1414


521

PUM

PS & SPR

AYE

QU

IPME

NT

Quick Teejet Nozzle CapsCap for Ceramic Disk Core

NOZZLE CAPS

CP19438-EPREPDM

standard700-1453

25607-NY

CAP FOR CERAMIC DISC CORE

25611-NY

TEEJET FLAT SPRAY TIPS(SMALLER CAPACITIES)

STANDARDLP (BRASS)LP (SS)XRDG

SIZES SMALLER THAN - -10- -01- -01- -01- -01

THRUTHRUTHRUTHRU

THE QUICK TEEJET CAPS ARE DESIGNED WITH GROOVES THAT FIT LOCATING LUGS ON THE NOZZLE BODY. CAPS ARE MADE OF NYLON AND ARE AVAILABLE FOR USE WITH ALL TEEJET SPRAY TIPS.

MAXIMUM OPERATING PRESSURE 300 PSI.

ALL CAPS SOLD IN QUANTITIES OF 5

TYPE TX, TG(THRU-5), FL CONE SPRAY TIPS AND TK FLOODJETSPRAY TIPS



- -08- -08- -08- -05

COLORBLACKWHITEREDBLUE

GREENYELLOWBROWNORANGE

PART NO.700-1506700-1507700-1508700-1509700-1510700-1511700-1512700-1513

PART NO.700-1536700-1537700-1538700-1539700-1540700-1541700-1542700-1543



PART NO.700-1618

COLORBLACK

PART NO.700-1463

DESCRIPTIONSEAT GASKET-CP18999-EPR

PART NO.700-1453700-1454

DESCRIPTIONSEAT GASKET-CP19438-EPR-EPDMSeat Gasket-CP19438VI-VITON

PART NO.700-1546700-1547700-1548700-1549700-1550700-1551700-1552700-1553

25597-NY



FOR USE WITH TJ TWINJET AND AI TEEJET SPRAY TIPS.

TEEJET NO.CP25611-1-NYCP25611-2-NYCP25611-3-NYCP25611-4-NYCP25611-5-NYCP25611-6-NYCP25611-7-NYCP25611-8-NY



TEEJET NO.CP26278-1-NY

QuickTeejetCap

SeatGasket ( )

SEAT GASKET FOR TEEJETDISC CORE

CP25609

For use with teejet flat spray tips larger capacitiesStandard tips - 10 thru 20 XR tips - 10 thru 15PART NO. TEEJET NO. COLOR700-1527 CP25609-2-NY White700-1528 CP25609-3-NY Red700-1529 CP25609-4-NY Blue700-1532 CP25609-7-NY Brown700-1533 CP25609-8-NY Orange

For use with turbo floodjet tips TK-VS floodjet tipsPART NO. TEEJET NO. COLOR700-1570 CP25599-1-NY Black700-1571 CP25599-3-NY Red 700-1572 CP25599-4-NY Blue700-1573 CP25599-6-NY Yellow700-1574 CP25599-8-NY Orange

CP25599

522


PUM

PS &

SPR

AYE

QU

IPM

EN

T

*Minimum order quantity is 6 (6 per carton)

•• RRuuggggeedd,, rreelliiaabbllee ddeessiiggnn •• EEaassyy ttoo iinnssttaallll aanndd uussee •• DDeetteeccttiioonn ooff pplluuggggeedd nnoozzzzlleess •• DDeetteeccttiioonn ooff wwoorrnn oorr ddaammaaggeedd ttiipp •• DDeetteeccttiioonn ooff lleeaakkss iinn hhoosseess aanndd ccoonnnneeccttiioonnss •• IInnccrreeaassee yyiieellddss bbyy pprrooppeerr aapppplliiccaattiioonn..

AAccccuurraatteellyy mmoonniittoorr tthhee ffllooww rraattee oonn yyoouurr lliiqquuiidd ffeerrttiill--iizzeerr aanndd cchheemmiiccaall aapppplliiccaattiioonn eeqquuiippmmeenntt.. RReeddbbaallllddooeess iitt eeffffiicciieennttllyy aanndd iinneexxppeennssiivveellyy..

IIff yyoouu hhaavvee sspprraayy ttiippss oorr ffeerrttiilliizzeerr oorriiffiicceess yyoouu ccaann’’tt sseeee,,wwhhyy ttaakkee aa cchhaannccee oonn pplluuggggeedd nnoozzzzlleess wwhheenn yyoouu ccaann uussee aaRReeddbbaallll SSpprraayy MMoonniittoorr..

Here's how simple it works... and it does.

MANIFOLD MODEL700-8100

SQUEEZE PUMP MODELS700-8101700-8102

MFG NO.3376-00023376-00043376-0005

DESCRIPTIONSpray Monitor Manifold 4 Row Unit - 3/8" & 1/2"Spray Monitor 4 Row Unit - 3/8" SqueezeSpray Monitor 4 Row Unit - 1/2" Squeeze

PART NO.*700-8100*700-8101*700-8102

DESCRIPTIONBall, Red Glass (Sold in sets of 4)Ball, Red Plastic (Sold in sets of 4)Ball, Green Plastic (Sold in setsBall, Stainless steel (Sold in sets of 4)Nut, Monitor polyDisk, BlankElbow 3/8" 90° w/retaining tips (Standard)Elbow, 1/2" 90° w/retaining tipsWasher 3/4" monitor EPDM (Standard)Washer, 3/4" monitor Viton

MFG NO.816510581651008165101SS316-200B35-M8202100C38-ELC12-EL81654008165401

PART NO.700-8110700-8111700-8112700-8113700-8114700-8115700-8116700-8117700-8118700-8119

ITEM4444152233

NUTRA - SOLFOR CLEANING SPRAY RIGS

• Neutralizes acidic chemicals.• Helps reduce contamination when changing from one chemical to another.• Assures accurate dosage by removing chemicals from previous batch.• Reduces strainer clogging and minimizes nozzle wear.

SIZE2 LB

PART NO.421-600


Redball Spray MonitorNutra-Sol


523

PUM

PS & SPR

AYE

QU

IPME

NT

Teejet Pesticide Safety KitTeejet Cleaning Brush

Teejet Calibration Container

60 OUNCE CAPACITY DUAL SCALE IN U.S. AND METRIC GRADUATIONS MOLDED POLYPROPYLENE CONSTRUC-

TION FOR CHEMICAL RESISTANCE AND DURABILITY

THE TEEJET TIP BRUSH IS DESIGNED TO SAFELY REMOVEDEBRIS FROM PLUGGED SPRAY TIPS. THE SOFT NYLON BRIS-

TLES WILL NOT DAMAGE SPRAY TIPS.

CLEANING BRUSH

CALIBRATION CONTAINER

PART NO.700-21

TEEJET NO.CP20016-NY

PART NO.700-23

TEEJET NO.CP24034

TEEJET TIP TESTERPART NO. TEEJET NO.700-6312 37670• Allows checking of spray tips flow rates in minutes• Two adapters provided to fit all types of conventional and

quick-attach nozzle caps• Tester supplied with nozzle cleaning brush• Compartment for storage of brush and extra spray tips

524


PUM

PS &

SPR

AYE

QU

IPM

EN

T

ZIPPER FRONT TYVEK COVERALLS

Economical 4-vent indirect vent model provides excellent protec-tion and wearer comfort.

• Set-in Sleeve Design Pattern for improved worker comfort!• Coveralls meet or exceed ANSI/ISEA 101-1993! Less rip and tear-outs!• Coveralls are manufactured under a new Garment Quality System called Tyvec

Protective Wear.

CHEMICAL SAFETY GEAR

PART NO.752-8110

EYE SAFETY PRODUCTS

PART NO.752-8201752-8202

MFG. NO.1412-L1412-XL

DESIGNER SAFETY EYEWEAR Cudas™ spectacles are great looking and comfortable safety glass. There's no pressure on yourhead, no distortion and no fogging. They feature a sleek Cudaslide temple that adjusts to five posi-tions for individual fit. The optical grade polycarbonate lens provides 99.9% UV protection toreduces eye strain in sunny, outdoor environments. The separate, nylon nosepiece offers greatercomfort and a snug, non-slip fit.

PART NO.752-8103350-0001350-0010752-8113

DESCRIPTIONDisplay (Glasses Sold Separately)Clear Safety GlassesGray Safety GlassesClear Face Shield

Chemical Safety Gear-Zipper Front Tyvek CoverallsEye Safety Products


525

PUM

PS & SPR

AYE

QU

IPME

NT

Spray HoseDischarge Hose

Vinyl Hose

RED RUBBER SPRAY HOSE

RED P.V.C. SPRAY HOSEThis hose is high quality specifically compounded synthetic cover and Tube. Willstand up to many agricultural spray solutionssuch as lasso, insecticides, and fungicides.Packed on mini reels.

Epdm solution agricultural spray hose for spraying pesticides, insecticides and fertilizerswith a water base. Durable and long lastingepdm cover and tube have excellent resistance tosunlight, ozone, heat, chemical action and abrasion.

HIGH PRESSURE AG-SPRAY HOSEAg spray is a chemical spray hose designed for medium and high pres-sure agriculture spraying. Features include: fuel and solvent resistanttubes increase service life and enables a wide range of chemicals to beused, tough abrasion-resistant outer cover for long life, flexible for easeof handling, wide temperature range-from 14° F to 140° F. Ideal forspray booms, pest control spray lines, orchard spraying, nursery, lawnand turf spraying, and chemical transfer.

Cuts all sizes up to 1 1/4" I.D. Polypropylene, polybutylene, pvc,abs, and rubber hose. Features a strong tough nylon handlewith repleable stainless steel blades. Li’l nipper cutters are easi-

ly carried. The cutters are light and can be handily carried in the back pocketor tool pouch. Ideal in limited working space, such as down a trench, close toa ceiling or wall etc.

PRICED PER FT.

PRICED PER FT.

PRICED PER FT.

EVA ANHYDROUS AMMONIA HOSE

DISCHARGE HOSE

CLEAR VINYL HOSE

CLEAR VINYL HOSEGood resistance to oils, acids, alkalids and many solventsexcept for ethers, key tones and aromatic hydro carbons. Non-toxic fda approved for potable liquids

Lay flat design pvc lightweight and flexible. This hose is easyto roll and carry. Strong and weather proof will not absorbwater, resistant to oils, greases, acids and many chemicals,abrasion, mildew and rot. Performance range is from 5 F to125 F.

100 FEET PER ROLLPRICED PER FT.

PRICED PER FT.

REINFORCED W/ POLYESTER YARNTo reduce elongation under pressure.


FT. PER REEL300300300300300300

WORKING PRESSURE

300300250200200150

SIZE I.D.

1/4"3/8"1/2"5/8"3/4"1"

PART NO.

301-4408301-4412301-4416301-4420301-4424301-4432

FT. PER REEL750'650'500'400'350'250'250'200'

WORKING PRESSURE

200200200200200200200200

SIZE I.D.

1/4"3/8"1/2"5/8"3/4"1"

1-1/4"1-1/2"

PART NO.

301-1408301-1412301-1416301-1420301-1424301-1432301-1340301-1348

PART NO.

301-4612301-4616

SIZE I.D.

3/8"1/2"

WORKINGPRESSURE

600600

FT PER REEL300300

PART NO.300-1312300-1316

WORKING PRESSURE AT 70°50

SIZE I.D.3/8"1/2"

HOSE CUTTER500 FEET PER ROLL - PRICED PER FT.

SIZE I.D.

1-1/2"2"3"

WORKINGPRESSURE

857085

FT. PERREEL300300300

PART NO.

301-6148301-6164301-6172

PART NO.

301-2708301-2712301-2716301-2724301-2732301-2720

SIZE I.D.1/4"3/8"1/2"3/4"1"

5/8"

WORKINGPRESSURE

706545353030

WALLTHICKNESS

1/16"1/8'1/8"1/8"1/8"1/8"

WORKING PRESSURE ATPART NO.

301-4508301-4512301-4516301-4520301-4524301-4532

SIZE I.D.1/4"3/8"1/2"5/8”3/4"1"

70°F 250225200200150125

122°F 1501251001008575

PART NO.456-241456-242

DESCRIPTIONCOMPLETE TOOLREPLACEMENTBLADES (2)

526


PUM

PS &

SPR

AYE

QU

IPM

EN

T

#300 EPDM SUCTION HOSE

PART NO.

301-3400301-3401301-3402301-3403301-3404

SIZEI.D.

1"1-1/4"1-1/2"

2"3"

WORKINGPRESSURE

5050505043

SIZEO.D.

1.34"1.65"1.84"2.43"3.52"

PITCH

.30"

.33"

.35"

.39"

.59"

BURSTING PRESSURE

72ºF220220220190150

VACUUMRATING

29.829.829.829.829.8

MINIMUM BENDING

RADIUS 72ºF1.9"3.2"3.2"5.2"7.1"

WEIGHTLbs./Ft.

.23

.34

.40

.671.10


Applications:Heavy duty liquid suction hose for use inconstruction dewatering, liquid waste,cesspool cleaning, septic handling, agricul-tural applications and marine use

Temp. Range: -40ºF to 158ºF

Features:• Lightweight and flexible• External helix provides for easy drag• Resistant to agricultural chemicals• Green & black color

Construction:EPDM rubber, polyethylene helix, smoothbore, corrugated O.D.

SUCTION HOSE

CLEAR SUCTION HOSE

#390 SD SUCTION/DISCHARGE HOSE


Applications:Suction and discharge of liquids in the con-struction, rental and agricultural industriessuch as agricultural chemcials, liquid fertiliz-ers and dewatering

Temp. Range: -40ºF to 158ºF

Features:• Lightweight and flexible• Rated for both suction and discharge• External helix provides for easy drag• Resistant to agricultural chemicals• Durable in construction applications• Black spiral

Construction:EPDM rubber, polyethylene helix, syn-thetic braiding, smooth bore, corrugatedO.D.

PART NO.

301-3410301-3411301-3412301-3413

SIZEI.D.

1-1/4"1-1/2"

2"3"

WORKINGPRESSURE

10010010090

SIZEO.D.

1.60"1.87"2.42"3.54"

PITCH

.39"

.43"

.47"

.59"

VACUUMRATING

29.829.829.829.8

MINIMUM BENDING

RADIUS 72ºF3.0"3.0"5.0"7.0"

WEIGHTLbs./Ft.

.45

.50

.731.25


A medium duty suction hose with reinforcing of rigid plastic with a smooth borevinyl tubing.

PART NO.

301-3324301-3332301-3340301-3348301-3364

SIZE I.D.

3/4"1"

1-1/4"1-1/2"

2"

WORKINGPRESSURE

8686797272

Suction Hose


527

PUM

PS & SPR

AYE

QU

IPME

NT

Fittings

FITTINGSPIPE THREAD-HOSE BARBS

POLYPROPYLENENPTM

HOSE BARB FITTINGNPTM

HOSE BARB FITTING

PART NO.804-125804-126804-127804-128804-129804-130804-132804-133804-134804-135804-136804-139804-140804-141804-142804-143804-144804-145804-146804-148804-149804-150804-151804-152804-153

NPTMSIZE1/41/41/43/83/83/81/21/21/21/21/23/43/43/43/43/41111-1/41-1/41-1/41-1/21-1/22

BARB SIZE1/43/81/21/43/81/21/43/81/25/83/43/81/25/83/413/411-1/411-1/41-1/21-1/41-1/22

MFG NO.A14A1438A1412A3814A38A3812A1214A1238A12A1258A1234A3438A3412A3458A34A34100A10034A100A100114A114100A114A114112A112114A112A200

PART NO.804-1125804-1126804-1127804-1128804-1129804-1130804-1132804-1133804-1134804-1135804-1136804-1139804-1140804-1141804-1142804-1143804-1144804-1145804-1146804-1148804-1149804-1150804-1151804-1152804-1153

NPTMSIZE1/41/41/43/83/83/81/21/21/21/21/23/43/43/43/43/41111-1/41-1/41-1/41-1/21-1/22

BARB SIZE1/43/81/21/43/81/21/43/81/25/83/43/81/25/83/413/411-1/411-1/41-1/21-1/41-1/22

MFG NO.3A14G3A1438G3A1412G3A3814G3A38G3A3812G3A1214G3A1238G3A12G3A1258G3A1234G3A3438G3A3412G3A3458G3A34G3A34100G3A10034G3A100G3A100114G3A114100G3A114G3A114112G3A112114G3A112G3A200G

PKG.QTY.

5555555555555555222111111

NYLON

ALL ITEMS ARE PRICED EACH & SOLD IN PACKAGE QUANTITIES.

PKG.QTY.

5555555555555555222111111

POLYPROPYLENENYLON MGHT/HOSEBARB FITTING

GARDEN HOSE THREAD-HOSE BARBS

PART NO.804-22804-23804-25

THREADSIZE3/43/43/4

BARB SIZE3/81/23/4

MFG. NO.D3438D3412D34

MGHT/HOSEBARB FITTING

BARB SIZE3/81/23/4

THREADSIZE3/43/43/4

PART NO.804-1022804-1023804-1025

MFG. NO.3D3438G3D3412G3D34G

PKG. QTY.

555

PKG. QTY.

555

THREAD SIZE1/43/81/23/411-1/41-1/22

PART NO.804-272804-273804-274804-275804-276804-277804-278804-279

MFG NO.M14M38M12M34M100M114M112M200

PART NO.804-1272804-1273804-1274804-1275804-1276804-1277804-1278804-1279

THREAD SIZE1/43/81/23/411-1/41-1/22

MFG NO.3M14G3M38G3M12G3M34G3M100G3M114G3M112G3M200G

PKG. QTY.55552111

PKG. QTY.55552111

HEX PIPE NIPPLESPOLYPROPYLENENYLONCLOSE NIPPLE: NPTM CLOSE NIPPLE:

NPTM

POLYPROPYLENENYLONELL FEMALE THREAD-HOSE BARBS

MFG. NO.EL3412FEL34F

BARBSIZE1/23/4

PART NO.804-367804-368

NPTSIZE3/43/4

PART NO.804-1367804-1368

BARBSIZE1/23/4

NPTSIZE3/43/4

MFG. NO.3EL3412G3EL34G

PKG.QTY.

55

PKG.QTY.

55

528


PUM

PS &

SPR

AYE

QU

IPM

EN

T

QJ39685 Series QuickJetNozzle Body For Dry Booms• Use with QuickTeejet Caps• Hose shanks available in double, single• (left or right) for 1/2" hose i.d.• Teejet Chemsaver drip-free shutoff• 300 P.S.I. Max operating pressure• Made of corrosion resistant materials• EPDM diaphragm

MAP No. Teejet No. Description700-1446 QJ39685IL500NYB Single-Left Nozzle Body

700-1465 QJ39685IR500NYB Single-Right Nozzle Body

700-1467 QJ396852500NYB Double Nozzle Body

QJ360B Series QuickTeejet Multiple Nozzle Body Assemblies For Dry Booms• Available in either 3 or 5 spray positionsfor easy change of spray tips or quick boomflushing.• Positive shutoff between each spray position• Max operating pressure of 300 P.S.I.• Chemsaver diaphragm check valves for drip-free shutoff• Corrosion resistant materials• Single or double hose shanks - 1/2", 3/4", or 1"

No. FitsMAP No. Teejet No. Type Outlets Hose700-1475 QJ363B5001NYB Single 3 1/2"700-1476 QJ363B5002NYB Double 3 1/2"700-1477 QJ363B7501NYB Single 3 3/4"700-1478 QJ363B7502NYB Double 3 3/4"700-1490 QJ365B7501NYB Single 5 3/4"700-1491 QJ365B7502NYB Double 5 3/4"700-1492 QJ365B10001NYB Single 5 1"700-1493 QJ365B10002NYB Double 5 1"

24230A Series QuickJetTriple Nozzle BodyFor Dry Booms• Same features as QJ360B

series, except has turretstyle nozzle

• Max operating pressure of 25 P.S.I.

MAP No. Teejet No.700-1472 24230A1785NYB DescriptionSingle 3/4" Hose Nozzle

MAP No. Teejet No.700-1473 24230A2785NYBDescriptionDouble 3/4" Hose Nozzle

700-1446 700-1465 700-1467

Dry Boom Nozzles


529

PUM

PS & SPR

AYE

QU

IPME

NT

FITTINGSELL PIPE THREAD-HOSE BARBS

NYLON"L" HOSEFITTINGS: NPT/HB

"L" HOSEFITTINGS: NPT/HB

PART NO.804-203804-204804-205804-207804-208804-209804-212804-213804-215804-218804-219804-221804-222804-223804-224804-225804-227804-228804-230804-231

NPTMSIZE1/41/41/43/83/83/81/21/21/23/43/43/43/41111-1/41-1/41-1/22

BARB SIZE1/43/81/21/43/81/23/81/23/43/81/23/411/23/4111-1/41-1/22

MFG. NO.EL14EL1438EL1412EL3814EL38EL3812EL1238EL12EL1234EL3438EL3412EL34EL34100EL10012EL10034EL100EL114100EL114EL112EL200

PART NO.804-1203804-1204804-1205804-1207804-1208804-1209804-1212804-1213804-1215804-1218804-1219804-1221804-1222804-1223804-1224804-1225804-1227804-1228804-1230804-1231

NPTMSIZE1/41/41/43/83/83/81/21/21/23/43/43/43/41111-1/41-1/41-1/22

BARB SIZE1/43/81/21/43/81/23/81/23/43/81/23/411/23/4111-1/41-1/22

MFG. NO.3EL14G3EL1438G3EL1412G3EL3814G3EL38G3EL3812G3EL1238G3EL12G3EL1234G3EL3438G3EL3412G3EL34G3EL34100G3EL10012G3EL10034G3EL100G3EL114100G3EL114G3EL112G3EL200G

POLYPROPYLENEPKG.QTY.

55555555555552221111

PKG.QTY.

55555555555552221111


ELBOW HOSE BARBSPOLYPROPYLENENYLON "L" HOSE

FITTINGS:HB/HB

"L" HOSEFITTINGS:

HB/HB

PART NO.804-102804-104804-106804-107804-108804-112804-113804-114804-115804-116

PART NO.804-181804-182804-185804-187804-188804-189804-190

BARB SIZE1/43/83/8 & 1/21/25/83/411-1/41-1/22

BARB SIZE1/4 X 1/43/8 X 3/81/2 X 1/23/4 X 3/41 X 11 1/4 X 1 1/41 1/2 X 1 1/2

PART NO.804-1102804-1104804-1106804-1107804-1108804-1112804-1113804-1114804-1115804-1116

PART NO.804-1182804-1185804-1187

BARB SIZE1/43/83/8 & 1/21/25/83/411-1/41-1/22

BARB SIZE3/8 X 3/81/2 X 1/23/4 X 3/4

MFG. NO.3SHM14G3SHM38G3SHM1238G3SHM12G3SHM58G3SHM34G3SHM100G3SHM114G3SHM112G3SHM200G

MFG. NO.3EL38HBG3EL12HBG3EL34HBG

MFG. NO.SHM14SHM38SHM1238SHM12SHM58SHM34SHM100SHM114SHM112SHM200

MFG. NO.EL14HBEL 38HBEL12HBEL34HBEL100HBEL114HBEL112HB

PKG.QTY.5555211

PKG.QTY.555

POLYPROPYLENENYLON

HOSE MENDERS

PKG. QTY.5555552111

PKG. QTY.5555552111

NYLON LOCKNUTS ONLY

POLYPROPYLENENYLONTHREAD11/16

MFG. NO.B12

PART NO.804-490

THREAD11/16

MFG. NO.3B12G

PART NO.804-1490

PKG.QTY.5

PKG.QTY.5

Fittings

530


PUM

PS &

SPR

AYE

QU

IPM

EN

TFittings

FITTINGSGAUGE TEES

WITH 1/4" GAUGE PORT

NYLON

PART NO.804-442

THREAD3/4

PORT SIZE1/4

MFG. NO.GTT3414

PART NO.804-1442

THREAD3/4

PORT SIZE1/4

MFG. NO.3GTT3414G

POLYPROPYLENE


PKG. QTY.1

PKG. QTY.1

TEE NOZZLESNYLON

PARTNO.804-377804-378804-379804-380

THREAD11/1611/1611/1611/16

BARB3/81/25/83/4

POLYPROPYLENETHREAD11/1611/1611/1611/16

PART NO.804-1377804-1378804-1379804-1380

BARB3/81/25/83/4

MFG. NO.3NTT38G3NTT12G3NTT58G3NTT34G

MFG. NO.NTT38NTT12NTT58NTT34

PKG. QTY.5555

PKG. QTY.5555

POLYPROPYLENE

ELL NOZZLES

NYLON

MFG. NO.NTL38NTL12NTL58NTL34

BARB3/81/25/83/4

THREAD11/1611/1611/1611/16

PART NO.804-370804-371804-372804-373

PART NO.804-1370804-1371804-1372804-1373

BARB3/81/25/83/4

THREAD11/1611/1611/1611/16

MFG. NO.3NTL38G3NTL12G3NTL58G3NTL34G

PKG. QTY.5555

PKG. QTY.5555

TEES WITH THREAD AND THREE HOSE BARBS

NYLONPART NO.

804-460804-461804-462

BARB3/81/23/4

THREAD11/16"11/16"11/16"

MFG. NO.T38CT12CT34C

PART NO.804-1460804-1461804-1462

BARB3/81/23/4

THREAD11/16"11/16"11/16"

MFG. NO.3T38CG3T12CG3T34CG

POLYPROPYLENEPKG. QTY.

555

PKG. QTY.555

THREAD ADAPTERS

PART NO.

804-471804-472804-473804-474804-475804-476804-477

MALE PIPE

1/41/23/41

1 1/41 1/2

2

FEMALE PIPE

1/41/23/41

1 1/41 1/2

2

MFG. NO.SE14SE12SE34

SE100SE114SE112SE200

PARTNO.

804-1471804-1472804-1473804-1474804-1475804-1476804-1477

MALE PIPE

1/41/23/41

1 1/41 1/2

2

FEMALE PIPE

1/41/23/41

1 1/41 1/2

2

MFG. NO.

35E14G35E12G35E34G

35E100G35E114G35E112G35E200G

POLYPROPYLENENYLON

90° STREET ELBOWS

PKG.QTY.

5522111

PKG.QTY.

5552111

POLYPROPYLENENYLONNIPPLESNPTM/GHTM

NIPPLESNPTM/GHTM

PART NO. SIZE804-33 3/4 MGHT X 3/4 MPT804-34 3/4 MGH X 1/2 MPT

MFG#E-34E3412

MFG#3E34G

PART NO. SIZE804-1033 3/4 MGHT X 3/4 MPT

PKG.QTY.

55

PKG. QTY.5


531

PUM

PS & SPR

AYE

QU

IPME

NT

FITTINGSTEES - PIPE THREAD

POLYPROPYLENE

FEMALE COUPLINGS

HOSE BARB INSERT TEES

NYLONPARTNO.804-481804-482804-483804-484804-485804-486804-487

FEMALE PIPE

1/41/23/41

1 1/41 1/2

2

MFG. NO.TT14TT12TT34TT100TT114TT112TT200

FEMALE PIPE

1/41/23/41

1 1/41 1/2

2

MFG. NO.3TT14G3TT12G3TT34G3TT100G3TT114G3TT112G3TT200G

PARTNO.804-1481804-1482804-1483804-1484804-1485804-1486804-1487


PKG.QTY.

5522111

PKG.QTY.

5522111

POLYPROPYLENENYLON

PARTNO.804-1261804-1262804-1263804-1264804-1265804-1266

FEMALE PIPE

1/23/41

1 1/41 1/2

2

FEMALE PIPE

1/23/41

1 1/41 1/2

2

MFG. NO.3FC12G3FC34G3FC100G3FC114G3FC112G3FC200G

PART. NO.804-261804-262804-263804-264804-265804-266

FEMALE PIPE

1/23/41

1 1/41 1/2

2

FEMALE PIPE

1/23/41

1 1/41 1/2

2

MFG. NO.FC12FC34FC100FC114FC112FC200

PKG.QTY.

552111

PKG.QTY.

552111

"T" HOSEBARB FITTING

BARB # 3

BARB # 2BARB #1

POLYPROPYLENENYLON

MFGNO.T14T38T3812T1238T12T58T3412T34T100T114T112T200

PARTNO.804-1402804-1406804-1407804-1410804-1413804-1414804-1415804-1416804-1417804-1418804-1419

# 1 BARB

1/43/81/21/25/81/23/41

1 1/41 1/2

2

# 2 BARB

1/43/81/21/25/81/23/41

1 1/41 1/2

2

# 3 BARB

1/43/83/81/25/83/43/41

1 1/41 1/2

2

MFGNO.3T14G3T38G3T3812G3T12G3T58G3T3412G3T34G3T100G3T114G3T112G3T200G

PKG.QTY.

55555552111

PARTNO.804-402804-406804-407804-409804-410804-413804-414804-415804-416804-417804-418804-419

# 1 BARB

1/43/81/23/81/25/81/23/41

1 1/41 1/2

2

# 2 BARB

1/43/81/23/81/25/81/23/41

1 1/41 1/2

2

# 3 BARB

1/43/83/81/21/25/83/43/41

1 1/41 1/2

2

PKG.QTY.

555555552111

HEX PIPE PLUGSPOLYPROPYLENENYLON

MFG#F14F38F12F34F100F114

NPT SIZE1/43/81/23/41

1-1/4

PART NO.804-342804-343804-344804-345804-346804-347

PART NO.804-1342804-1343804-1344804-1345804-1346804-1347

MFG#3F14G3F38G3F12G3F34G3F100G3F114G

NPT SIZE1/43/81/23/41

1-1/4

PKG.QTY.

555521

PKG.QTY.

555521

Fittings

532


PUM

PS &

SPR

AYE

QU

IPM

EN

TFittings

POLYPROPYLENE

REDUCER PIPE BUSHINGS

FEMALE GARDEN HOSE THREAD AND FEMALE PIPE THREADPOLYPROPYLENE

ALL ITEMS ARE PRICED EACH & SOLD IN PACKAGE QUANTITIES.FITTINGS

FOR USE WITH 804-7 SWIVEL NUT

NYLON

NYLON

PART NO.804-303804-305804-306804-308804-309804-310804-314804-315804-318804-319804-322804-323804-324804-325804-326804-328

NPTM SIZE3/8 X 1/41/2 X 1/41/2 X 3/83/4 X 1/43/4 X 3/83/4 X 1/21 X 1/21 X 3/41-1/4 X 3/41-1/4 X 11 1/2 X 11-1/2 X 1-1/42 X 12 X 1 1/42 X 1-1/23 X 2

MFG#RB3814RB1214RB1238RB3414RB3438RB3412RB10012RB10034RB11434RB114100RB112100RB112114RB200100RB200114RB200112RB300200

PARTNO.804-1303804-1305804-1306804-1308804-1309804-1310804-1314804-1315804-1318804-1319804-1322804-1323804-1324804-1325804-1326804-1328

NPTM SIZE3/8 X 1/41/2 X 1/41/2 X 3/83/4 X 1/43/4 X 3/83/4 X 1/21 X 1/21 X 3/41-1/4 X 3/41-1/4 X 11 1/2 X 11-1/2 X 1-1/42 X 12 X 1 1/42 X 1-1/23 X 2

MFG#3RB3814G3RB1214G3RB1238G3RB3414G3RB3438G3RB3412G3RB10012G3RB10034G3RB11434G3RB114100G3RB112100G3RB112114G3RB200100G3RB200114G3RB200112G3RB300200G

PKG.QTY.

5555552211111111

PKG.QTY.

5555552211111111

COUPLERS

PKG. QTY.5

PKG. QTY.5

MFG #I34E3412

MFG. #J3412

MFG #3I34G

MFG. #3J3412G

PART NO.804-46804-34

PART NO.804-47

DESCRIPTION3/4" FGHT X 3/4" MGHT3/4" MGH X 1/2" MPT

DESCRIPTION3/4" FGHT X 1/2" FPT

PART NO.804-1046

PART NO.804-1047

DESCRIPTION3/4" FGHT X 3/4" MGHT

DESCRIPTION3/4" FGHT X 1/2" FPT

POLYPROPYLENE

PKG. QTY.5

NYLON

PKG. QTY.55

COUPLERS

FLAT SEAT HOSE BARBS

POLYPROPYLENEPKG. QTY.

55555

NYLONSIZE1/43/81/25/83/4

MFG#C14C38C12C58C34

PART NO.804-11804-12804-13804-14804-15

PART NO.804-1011804-1012804-1013804-1014804-1015

SIZE1/43/81/25/83/4

MFG#3C14G3C38G3C12G3C58G3C34G

PKG. QTY.55555

SWIVEL NUTS

SWIVELHOSE NUT

PKG. QTY.5

SWIVELHOSE NUT POLYPROPYLENENYLON

PART NO. SIZE804-1007 3/4 GHT

MFG#3B34G

PART NO. SIZE804-7 3/4 FGHT804-4 WASHER

MFG#B34

PKG. QTY.55


533

PUM

PS & SPR

AYE

QU

IPME

NT

FITTINGS

POLYPROPYLENENYLON

ADAPTER 90° ELBOWS

NYLON FITTINGS90° ELBOW

POLYPROPYLENE FITTINGS90° ELBOW

FEMALEMPT1/2"3/4"1"

1 1/4"1 1/2"

2"

MFG. NO.

LL1212LL3434LL100LL114LL112LL200

PART NO.

804-251804-252804-253804-254804-255804-256

MPT

1/2"3/4"

MFG. NO.

EL3412GPEL34GP

PART NO.

804-51804-52

MGHT

3/4"3/4"

PARTNO.

804-1051804-1052

MPT

1/2"3/4"

MFG. NO.

3EL3412GPG3EL34GPG

MGHT

3/4"3/4"

ALL ITEMS ARE PRICED EACH & SOLDIN PACKAGE QUANTITIES WHERE LISTED.

PKG.QTY.

55

PKG.QTY.

55

PKG.QTY.

522111

MFG. NO.

3LL12G3LL34G

3LL100G3LL114G3LL112G3LL200G

FEMALEMPT1/2"3/4"1"

1 1/4"1 1/2"

2"

PART NO.

804-1251804-1252804-1253804-1254804-1255804-1256

PKG.QTY.

522111

NOZZLE THREAD CONNECTORS W/ HOSE BARB

NYLON

JET AGITATORS3/4" MPT OUTSIDE THREAD

3/4" MPT INSIDE THREAD

SIZE3/4" NPT NYLON JET AGITATOR COMPLETE WITH 1/4", 3/16", 5/32", & 1/8" NOZZLES

MFG. NO.3371-0019

PART NO. 712-801

SIZE1/2" FPT INLET, 3/4" MPT OUTLETCOMPLETE WITH 3/16", 5/32", & 1/8" NOZZLES

MFG. NO.3371

PART NO. 712-3371

3/4" MPT OUTLET 1/2" FPT INLET

PART NO.804-450804-451

THREAD11/1611/16

BARB3/81/2

MFG. NO.38D3812D

PKG. QTY.55

POLY TANK BULKHEAD FITTINGSBLACK POLYPROPYLENE DOUBLE THREADED BULKHEAD (TANK) FITTING WITH 3/16" EPDM GASKET (WITH-DRAWAL FITTINGS) CAN BE INSTALLED FROM ONE SIDE OF TANK OPENING SAME SIZE AS OUTSIDE DIAMETER.

PART NO.804-502804-503804-504804-505804-506

SIZE3/4"1"

1 1/4"1 1/2"

2"

MFG. NO.WBH34WBH100WBH114WBH112WBH200

FittingsNozzle Thread Connectors w/Hose Barb

Poly Tank Bulkhead Fittings, Jet Agitators

534


PUM

PS &

SPR

AYE

QU

IPM

EN

TBrass Gate ValvesBrass Hose BibbsBrass Ball Valves, Garden Hose

ROUGH BRASS READINGPATTERN FAUCET, HOSETHREAD, TEE, HANDLE,IPT CONNECTION.

BRASS HOSE BIBBSBRASS GATE VALVES

BRASS BALL VALVES

GARDEN HOSE

200 PSI W.O.G.NON SHOCK TO 200º FNON RISING STEMSOLID WEDGE DISCTHREADED ENDS

125 PSI W.S.P.400 PSI W.O.G. NON SHOCKTHREADED ENDSSTANDARD PORT

SIZE 1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

PARTNO.319-1608319-1612319-1616319-1624319-1632319-1640319-1648319-1664

PART NO.319-1708319-1712319-1716319-1724319-1732319-1740319-1748319-1764

SIZE 1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

SIZE I.P.T.1/2"3/4"

PARTNO.319-1516319-1524

TIRE CORDREINFORCED

PART NO. SIZE308-100 5/8" X 50 FT

• POPULARLY PRICED• ATTRACTIVE COIL PACKAGE• FLEXIBLE, FOR EASY COILING• ALL-BRASS COUPLINGS

• BRILLIANT GREEN"MIRROR FINISH"

• REINFORCED WITH NYLON TIRE CORD


535

PUM

PS & SPR

AYE

QU

IPME

NT

BRASS HOSE INSERTS

MALE BARBEDBRASS INSERT

SOLIDFEMALE BARBED

BRASS INSERT

FEMALE BARB INSERTS

MALE GARDEN HOSE INSERTS

MALE BARB INSERTS

SWIVELBRASS HEX NUTGARDEN HOSE NUT

SWIVEL HOSE BARBS

SWIVELBRASS HOSE BARB

GARDEN HOSE NUTSGARDEN HOSE WASHER

BRASS HOSE MENDERS

PARTNO.807-21807-22807-23807-24807-25

MFG NO.

998FB999FB993FB994FB995FB

SIZE

1/4"3/8"1/2"5/8"3/4"

PARTNO.807-20

807-26

MFG NO.GHN

GHW

DESCRIPTIONGARDEN HOSE NUTGARDEN HOSE WASHER

PARTNO. 807-120 807-121807-122807-123807-124

MFG NO.733730731732735

BARB SIZE3/8"3/16"1/4"5/16"1/2"

PART NO.807-4701807-4702807-4703807-4704807-4705807-4706807-4709807-4713807-4715807-4716807-4719807-4720807-4721807-4722807-4725807-4726807-4730807-4732807-4739

MFG. NO.6846906896916926876936946951172697686698117368511817006991164

HOSE I.D.1/8"

3/16"3/16"1/4"1/4"1/4"

5/16"3/8"3/8"3/8"1/2"1/2"1/2"1/2"5/8"5/8"3/4"3/4"1"

MALE NPT1/8"1/8"1/4"1/8"1/4"3/8"1/4"1/4"3/8"1/2"1/4"3/8"1/2"3/4"3/8"1/2"1/2"3/4"1"

PART NO.807-4655807-4663807-4665

MFG.NO.720722725

HOSE I.D.1/4"3/8"3/8"

FEMALEPIPE

THREAD1/4"1/4"3/8"

PART NO.807-4823807-4828807-4829

MFG. NO.990M991M992M

HOSE I.D.1/2"5/8"3/4"

GARDENHOSE

THREAD3/4"3/4"3/4"

Brass Hose Inserts

536


PUM

PS &

SPR

AYE

QU

IPM

EN

TPipe to Hose FittingsTubePak Cable TiesUV Black Cable Ties

BRASS

H-3

H-2

H-14,H-15

S-1

S-2

S-3

H-4

H-530

H-6

H-10

H-8

H-7

UV BLACK CABLE TIESONE PIECE 6/6 NYLON

FOR TYING AND BUNDLING IN INDUSTRIAL, PLUMBING, AUTOMOTIVE AND MARINE APPLICATIONS.

PIPE TO HOSE FITTINGS

PART NO. DESCRIPTION807-103 3/4" MHT X 1/2" MIP

PART NO. DESCRIPTION807-104 3/4" MHT X 3/4" FIP

PART NO. DESCRIPTION807-105 3/4" MIP X 1/2" FIP

PART NO. DESCRIPTION807-106 3/4" MHT X 3/4" MHT

PART NO. DESCRIPTION807-101 3/4" MHT X 1/2" FIP

PART NO. DESCRIPTON807-102 3/4" MHT X 3/4" MP X 1/2" FIP

PART NO. DESCRIPTION807-107 1/2" MIP X 3/4" FHT

PART NO. DESCRIPTION807-109 3/4" MHT X 3/4" MIP

PART NO. DESCRIPTION807-110 3/4" FHT X 3/4" FHT

PART NO. DESCRIPTION807-111 3/4" FHT X 3/4" FIP

PART NO. DESCRIPTION807-117 1/2" FIP X 3/4" FHT (SWIVEL)

PART NO. DESCRIPTION807-118 3/4" FIP X 3/4" FHT (SWIVEL)

PART NO. DESCRIPTION807-119 3/4" FHT X 3/4" FHT (SWIVEL)

PACKAGED AND SOLD 100 PER BAGEXCEPT *PACKAGED AND SOLD 50 PER BAG

TUBEPAK CABLETIES

PART NO.374-2655

• Resealable tube contains 450 assorted cable ties

• Contains assorted color cable ties

• Includes 4”, 7”, and 11”• Ideal for promotions and

endcaps displays

• Install easily with or without tools• Easy to grasp, easy to thread tip• Serrated on both sides of strap for greater holding power• Withstands wide temperature range• Corrosion resistant; fungus resistant• For indoor and outdoor applications• Tapered tips slip easily under and around cables• Flexible nylon conforms readily to most shapes• Uniform serrations along the length of the tie permit easy “pull through” right

down to the bundle-ready for final tensioning and cut-off for a neat, tight harness.

Length4"7"11"14"15" 21" 30"

PART NO.374-2640374-2641374-2642374-2643

*374-2644*374-2645*374-2646

Tensile Strength18 lbs.75 lbs.75 lbs.

120 lbs.120 lbs.175 lbs.175 lbs.


537

PUM

PS & SPR

AYE

QU

IPME

NT

HOSE CLAMPS

Hang it on the wall or stand it on the counter. Conveniently displays popular clamp sizes for impulse salesand easy inventory. Use for compressing, fastening, clamping,repairing. Clamps to fit any hose, pipe or tubing from 1/4" to2-3/4" O.D.

HOSE CLAMPMERCHANDISER

PART NO. MIN. MAX.316-6 7/16" 25/32"316-8 7/16" 29/32"316-10 9/16" 1-1/16"316-12 11/16" 1-1/4"316-16 3/4" 1-1/2"316-20 13/16" 1-3/4"316-24 1-1/16" 2"316-28 1-5/16" 2-1/4"316-32 1-9/16" 2-1/2"316-36 1-13/16" 2-3/4"316-40 2-1/16" 3"316-44 2-5/16" 3-1/4"316-48 2-9/16" 3-1/2"316-52 2-13/16" 3-3/4"316-56 3-1/16" 4"316-60 3-5/16" 4-1/4"

CLAMPS ARE MANUFACTURED OF STAINLESSSTEEL- BAND AND HOUSING WITH HARDENEDZINC PLATED ADJUSTING SCREW.

MINI CLAMPS5/16" BAND 1/4" HEX HEAD SCREW WITH SLOT

PRICED EACH - PACKAGED 10 PER CARTON

MIN: 1/4"MAX: 5/8"

PART NO.316-104

MIN: 5/16"MAX: 29/32"

PART NO.316-106

STANDARD CLAMPS9/16" BAND 5/16" HEX HEAD SCREW WITH SLOT

PRICED EACH - PACKAGED 10 PER CARTON

Tightens firmly. Holds permanently.

Exerts even pressure.

DESCRIPTIONClamp Display (with clamps)Clamp Display only (empty)

PART NO.316-1

316-101

Hose Clamps-Standard ClampsMini Clamps

Hose Clamp Merchandiser

538


PUM

PS &

SPR

AYE

QU

IPM

EN

THose Clamps-Stainless Steel ClampsT-Bolt Clamps

STAINLESS STEELCLAMPS

PRICED EACHPACKAGED 10 PER BOX

HOSE CLAMPS

Priced & sold individually.

Standard T-Bolt Clamps. A Reliable, heavy dutymethod of assembling hose ducting connectionsand tubing. Clamps have a 7/16” nylon insert platedlocknut, plated steel bolt. They also have stainlesssteel trunnion, band & liner.

T-BOLT CLAMPS

PART NO.316-116316-118

316-1104316-1106316-1110316-1112316-1116316-1120316-1124316-1128316-1132316-1136316-1140316-1144316-1148316-1152316-1156316-1160

DESCRIPTIONHose Clamp 7/16" - 25/32"Hose Clamp 7/16" - 29/32"

Miniature Hose Clamp 1/4" - 5/8"Miniature Hose Clamp 5/16" - 29/32"

Hose Clamp 9/16" - 1-1/16"Hose Clamp 11/16" - 1-1/4"Hose Clamp 3/4" - 1-1/2"

Hose Clamp 13/16" - 1-3/4"Hose Clamp 1-1/16" - 2"

Hose Clamp 1-5/16" - 2-1/4"Hose Clamp 1-9/16" - 2-1/2"Hose Clamp 1-13/16 - 2-3/4"

Hose Clamp 2-1/16" - 3"Hose Clamp 2-5/16" - 3-1/4"Hose Clamp 2-9/16 - 3-1/2"

Hose Clamp 2-13/16" - 3-3/4"Hose Clamp 3-1/16" - 4"

Hose Clamp 3-5/16" - 4-1/4"

PART NO.316-2603316-2604316-2605316-2607316-2609316-2610316-2613316-2616316-2618316-2622316-2623

MIN.1-5/8”1-3/4”1-7/8”2-1/8”2-3/8”2-1/2”2-7/8”3-1/4”3-1/2”4-1/4”4-1/2”

MAX.1-7/8”

2”2-1/8”

2-7/16”2-11/16”2-13/16”3-3/16”3-9/16”

3-13/16”4-9/16”

4-13/16”


539

PUM

PS & SPR

AYE

QU

IPME

NT

PIONEER WATER HOSE QUICK COUPLINGS

BRASS AND STAINLESS STEELCONSTRUCTION FOR EXTRASTRENGTH / LONG LIFE

QUALITY, TEMPERATURE-RESIS-TANT NITRILE SEALS FOR ALEAK-FREE LONG SERVICE LIFE

DURABLE 4 BALL LOCKINGMECHANISM FOR SECURECONNECTIONS

NO MORE THREADING NOZZLES / SPRAYERS / EQUIPMENTUNVALVED DESIGN PERMITS MAXIMUM FLOW WITH MINIMUM PRESSURE DROP.

807-5002

807-5004

807-5003

807-5001

EASE OF USE

1. THREAD COUPLER TO FAUCET OR TO A MALE HOSE END.THREAD NIPPLE TO FEMALE HOSE END.

2. TO CONNECT, PULL BACK SLEEVE ON COUPLER, INSERTNIPPLE AND RELEASE THE SLEEVE.

3. TO DISCONNECT, RETRACT SLEEVE ON COUPLER AND PULLOUT NIPPLE.

*Conveniently packaged in attractiveCounter display of ten couplings each.

PIONEER WATER SERVICE QUICK COUPLINGS ARE FOR LOW PRESSURE WATER SERVICE ONLY. DO NOT EXCEED 200 PSI.

807-5005

APPLICATIONS - HEAVY DUTY SERVICE ON FARMS SUCH AS:

• MILKING PARLOR EQUIPMENT • WASH-DOWN SYSTEMS• LIVESTOCK WATERING SYSTEMS • MOBILE WATER TANK LINES• GARDEN HOSE • FOOD PROCESSING EQUIPMENT

PART NO.807-5001807-5002807-5003807-5004807-5005

MFG. NO.BP1163BP1163-611163-6047300011163MB

DESCRIPTIONWATER COUPLING COMPLETEMALE HALF ONLYFEMALE HALF ONLYWASHER ONLY10 WATER HOSE QUICK COUPLINGS (COUNTER DISPLAY)

Pioneer Water Hose Quick Couplings

540


PUM

PS &

SPR

AYE

QU

IPM

EN

TGalvanized Malleable Pipe Fittings

COUPLINGS 90° STREET ELBOWS

TEESGROUND JOINT UNIONS

GALVANIZED MALLEABLE PIPE FITTINGS

PART NO.820-102820-104820-106820-108820-112820-116820-120820-124820-132

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

NOT RECOMENDED FOR HIGH PRESSURE HYDRAULIC APPLICATION. ALL SIZESSHOWN ARE NPT (PIPE) THREAD

PART NO.820-602820-604820-606820-608820-612820-616820-620820-624820-632

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

PART NO.820-204820-206820-208820-212820-216820-220820-224820-232

SIZE1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

PART NO.820-702820-704820-706820-708820-712820-716820-720820-724820-732

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

90° ELBOWS

PART NO.820-402820-404820-406820-408820-412820-416820-420820-424820-432

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

CAPS

PART NO.820-802820-804820-806820-808820-812820-816820-820820-824820-832

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

PLUGSPART NO.820-902820-904820-906820-908820-912820-916820-920820-924820-932

SIZE1/8"1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"

BANDED CROSS

PART NO.

823-104823-108

SIZE

1/4"1/2"


541

PUM

PS & SPR

AYE

QU

IPME

NT

PART NO.

312-124312-132312-140312-148312-165312-172

MFG. NO.

AA34PAA100PAA114PAA112PAA200PAA300P

HOSEBARB

3/41

1 1/41 1/2

23

MPT.

3/41

1 1/41 1/2

23

FOR LOW PRESSURE DISCHARGE & SUCTION SERVICE.NOT INTENDED OR RECOMMENDED FOR COMPRESSED AIR OR HYDRAULIC APPLICATIONS.

ALL SIZES SHOWN ARE NPT (PIPE) THREAD

GALVANIZED MALLEABLE PIPE FITTINGS

HEX BUSHINGS REDUCING COUPLINGS

PLATED STEEL FITTING MPT - HOSE BARB

PART NO.821-101821-102821-103821-104821-105821-106821-107821-108821-109821-110821-111821-114821-115821-118821-121

SIZE1/4" X 1/8"3/8" X 1/8"3/8" X 1/4"1/2" X 1/8"1/2" X 1/4"1/2" X 3/8"3/4" X 1/4"3/4" X 3/8"3/4" X 1/2"1" X 1/2"1" X 3/4"1-1/4 X 3/4"1-1/4" X 1"1-1/2" X 1-1/4"2" X 1-1/2"

PART NO.821-601821-603821-605821-606821-608821-609821-610821-611821-615821-618821-621

SIZE1/4" X 1/8"3/8" X 1/4"1/2" X 1/4"1/2" X 3/8"3/4" X 3/8"3/4" X 1/2"1" X 1/2"1" X 3/4"1-1/4" X 1"1-1/2" X 1-1/4"2" X 1-1/2"

Galvanized Malleable Pipe Fittings

Modern Ag Parts - Beaumont, Texas - Order Toll-Free 1-888-404-8908 - Fax Toll-Free 1-888-404-8910

542


PUM

PS &

SPR

AYE

QU

IPM

EN

TGalvanized Pipe Nipples

GALVANIZED PIPE NIPPLESNOTE:1 X CLOSE - 1 X 1-1/21-1/4 X CLOSE - 1-1/4 X 1-5/81-1/2 X CLOSE - 1-1/2 X 1-3/42 X CLOSE - 2 X 2

PART NO.822-1303822-1304822-1305822-1306822-1307822-1309822-1311822-1401822-1402822-1403822-1404822-1405822-1406822-1407822-1408822-1410822-1411822-1501822-1503822-1504822-1505822-1511822-1601822-1605822-1701822-1801822-1805822-1811

CLOSE-ALLTHREAD

SIZE1/2 X 2

1/2 X 2-1/21/2 X 3

1/2 X 3-1/21/2 X 41/2 X 51/2 X 6

3/4 X Close3/4 X 1-1/2

3/4 X 23/4 X 2-1/2

3/4 X 33/4 X 3-1/2

3/4 X 43/4 X 4-1/23/4 X 5-1/2

3/4 X 61 X Close

1 X 21 X 2-1/2

1 X 31 X 6

1-1/4 X Close1-1/4 X 3

1-1/2 X Close2 X Close

2 X 32 X 6

YOU MAY ORDER THESE BY SIZE OR STOCK NUMBER.EXAMPLE: 1/4 X 2 WOULD BE 822-1103

NOT RECOMMENDED FOR HIGH PRESSURE HYDRAULIC APPLICATION. ALL SIZESSHOWN ARE NPT (PIPE) THREAD

ALL MEASUREMENTS IN INCHES.

PART NO.822-1001822-1002822-1003822-1005822-1007822-1011822-1101822-1102822-1103822-1104822-1105822-1106822-1107822-1109822-1111822-1201822-1202822-1203822-1204822-1205822-1206822-1207822-1209822-1211822-1301822-1302

SIZE1/8 X Close1/8 X 1-1/2

1/8 X 21/8 X 31/8 X 41/8 X 6

1/4 X Close1/4 X 1-1/2

1/4 X 21/4 X 2-1/2

1/4 X 31/4 X 3-1/2

1/4 X 41/4 X 51/4 X 6

3/8 X Close3/8 X 1-1/2

3/8 X 23/8 X 2-1/2

3/8 X 33/8 X 3-1/2

3/8 X 43/8 X 53/8 X 6

1/2 X Close1/2 X 1-1/2

pump& sprayer section - powell's equipment part

Documents