pumping technology · pumping technology 08 waterflo wf series back pull-out end suction...
TRANSCRIPT
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
AKAY WATERFLO WF SERIES
Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255
Stuffing BoxStandard stuffing box includes gland packing with a lantern ring incorporating high pressure internal flushing. External flush can be fitted and pump can be supplied with a mechanical seal. Conversion from packed box to mechanical seal and back to packing is easy. All pumps that can operate at 2 pole speed have a close tolerance stuffing box bush fitted.
Bearing housingRugged iron construction with only three bearing housings covering complete range of pumps which gives many common inter changeable parts.
BearingsBearings on 33 sizes are grease lubricated sealed for life. 4 sizes have oil lubricated bearings and for this arrangement the housing includes an oil level sight glass and vent.
Support FootEach pump has a remove-able support foot fitted at drive and for greater rigidity.
Shaft SleeveFully mechanical hook type shaft sleeve prevents shaft damage under the gland pac-king which substantially reduces maintenance costs.
Wear RingsReplaceable wear-rings are fitted as standard to all casings and also to back covers on lager pumps which reduces maintenance time and costs.
Waterflo WF AKAY INDUSTRIES
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
CasingThe cast iron volute casing is of robust design with integrally cast feed, vertical top centreline discharge with axial suction incorporating cast inlet vane to give best flow to impeller eye.
ImpellerDouble shrouded type is hydraulically balanced and positively driven by shaft key and axially locked sleeve and impeller nut.
ShaftA domed type locking nut seals the stainless steel shaft at the impeller. Only 4 shafts are required to cover whole 37 sizes and reduces inventory to a minimum.
Back pull out featureThis design feature allows the complete rotating element to be removed for servi-cing without disconnecting pipework. If a spacer coupling is fitted than motor does not have to be moved. On re-assembly of pump coupling re-alignment problems are completely eliminated.
ApplicationsAir Conditioning TransferHeating and Ventilating Water Treatment and supplyRefrigeration IrrigationFire Protection DrainagePlumbing Factory PumpingFood and Drink Manufacture Process IndustryCirculating Petroleum ProductsWater Pressure Boosting General Industry
Waterflo WF AKAY INDUSTRIES
Material of construction
Bonze fitted Cast iron All iron
Casing Cast iron Cast iron Cast iron
Impeller Bronze Cast iron Cast iron
Wear Ring Cast iron Cast iron Cast iron
Shaft Stainless steel Stainless steel Stainless steel
Shaft Nut Stainless steel Stainless steel Cast iron
Shaft Sleeve Stainless steel Stainless steel Stainless steel
Lantern Ring Cast iron Cast iron Cast iron
Gland Cast iron Cast iron Cast iron
Materials specification
Material Nearest Austra-lian
Equivalent British Standard Ameri-can
DIN
Cast iron AS 1830/T200 BS 1452GR 220
ASTM A48Class 30
DIN 1691GG 20
Bronze AS1565/836B BS 1400LG2
ASTMB 145CDA 836
DIN 1705
Stainless Steel
AS 1444GR 420
BS970420/S37
AISI 420 DIN 17440
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
Structural drawing of Waterflo WF Series AKAY INDUSTRIES
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
ShaftModel Suction Discharge Pump dimentions Foot Dimensions Shaft End Coupling NetDiameter
A F H 1 B M 1 M2 N 1 N 2 N3 H 3 Ồ1 Ồ2 W X D L Key Weight kg32-13 80 112 140 50 100 70 190 140 100 2832-16 80 132 160 50 100 70 240 190 100 14 14 14 267 140 24 50 8 x 7 3632-20 25 50 32 80 360 160 180 50 100 70 240 190 110 4332-26 100 180 225 65 125 95 320 250 110 6340-13 25 80 360 112 140 50 100 70 210 160 100 267 24 50 8 x 7 3140-16 25 80 360 132 160 50 100 70 240 150 100 267 24 50 8 x 7 3740-20 25 100 360 160 180 50 100 70 265 212 110 267 24 50 8 x 7 4640-20 25 65 40 100 360 180 225 65 125 95 320 250 110 14 14 14 267 140 24 50 8 x 7 6340-32 35 125 470 200 250 65 125 95 350 280 110 342 32 80 10 x 8 96
40-32 h 45 h 125 519 200 250 65 125 95 350 280 110 362 42 110 12 x 8 10450-13 25 100 360 132 160 50 100 70 240 190 110 14 267 24 50 8 x 7 3450-16 25 100 360 160 180 50 100 70 265 212 14 267 24 50 8 x 7 3850-20 25 65 50 100 360 160 200 50 100 70 265 212 110 14 14 14 267 140 24 50 8 x 7 4850-26 25 100 360 180 225 65 125 95 320 250 16 267 24 50 8 x 7 6550-32 35 125 470 225 280 65 125 95 350 280 16 342 32 80 10 x 8 101
50=32 h 45 h 125 523.5 225 280 65 125 95 350 280 14 14 364 42 110 12 x 8 11065-13 25 100 360 160 180 65 125 95 280 212 14 14 267 24 50 8 x 7 4065-16 25 100 360 160 200 65 125 95 280 212 14 14 267 24 50 8 x 7 4465-20 25 80 65 100 360 180 225 65 125 95 320 250 110 16 18 14 267 140 24 50 8 x 7 5465-26 35 100 470 200 250 80 160 120 360 280 16 18 342 32 80 10 x 8 6365-32 35 125 470 225 280 80 160 120 400 315 16 18 342 32 80 10 x 8 110
65-32 h 45 h 125 520 225 280 80 160 120 400 315 14 14 363 42 110 12 x 8 11880-16 25 360 180 225 65 125 95 320 250 14 14 267 24 50 8 x 7 5580-20 35 100 80 125 470 180 250 65 125 95 345 280 100 16 18 14 342 140 32 80 10 x 8 7280-28 35 470 200 280 80 160 120 400 315 16 18 342 32 80 10 x 8 9280-32 35 470 250 315 80 160 120 400 315 16 18 342 32 80 10 x 8 120
80-32 h 45 h 521 250 315 80 160 120 440 355 18 18 363 42 110 12 x 8 12880-40 45 530 280 355 80 160 120 440 355 16 18 370 42 110 12 x 8 162100-16 35 125 470 200 250 80 160 120 360 280 16 18 342 32 80 10 x 8 81100-20 35 125 470 200 280 80 160 120 360 280 16 18 342 32 80 10 x 8 87100-26 35 125 100 140 470 225 280 80 160 120 400 315 110 16 18 14 342 140 32 80 10 x 8 110
100-26 h 45 h 140 520 225 280 80 160 120 400 315 16 18 363 42 110 12 x 8 117100-32 35 140 470 250 315 80 160 120 400 315 16 18 342 32 80 10 x 8 134
100-32 h 45 h 140 520 250 315 80 160 120 400 315 18 18 363 42 110 12 x 8 143100-40 45 140 530 280 355 100 200 150 500 400 18 23 370 42 110 12 x 8 177125-20 35 470 250 315 80 160 120 400 315 18 18 342 32 80 10 x 8 111125-26 35 150 125 140 470 250 355 80 160 120 400 315 110 18 18 14 342 140 32 80 10 x 8 115125-32 45 530 280 355 100 100 150 500 400 18 23 370 42 110 12 x 8 163125-40 45 530 315 400 100 100 150 500 400 18 23 370 42 110 12 x 8 190150-20 35 495 280 400 550 450 20 367 32 80 10 x 8 140150-26 35 200 150 160 530 250 355 100 200 150 450 350 110 18 23 14 370 140 42 110 12 x 8 164150-32 45 530 280 400 550 450 18 370 42 110 12 x 8 175150-40 45 530 315 450 550 450 18 370 42 110 12 x 8 210200-32 250 200 225 725 315 435 100 200 150 550 450 140 500 48 14 x 10 251200-40 250 200 225 670 315 450 100 200 150 550 450 140 500 48 14 x 10 295250-32 55 300 250 250 693 400 500 100 270 180 500 400 180 30 23 14 513 140 48 110 14 x 10 311250-40 300 250 250 797 450 505 125 270 210 600 500 180 611 60 18 x 12 390
FLANGE DATA Dimensions in mm
Brach Flange Drilling Raised face BoltingSize D B D1 F No D2 K32 140 18 78 2 4 18 100 M1640 150 18 88 3 4 18 110 M1650 165 20 102 3 4 18 125 M1665 18 20 122 3 4 18 145 M1680 200 22 138 3 8 18 160 M16100 220 24 158 3 8 18 180 M16125 250 26 188 3 8 18 210 M16150 285 26 212 3 8 22 240 M20200 340 30 268 3 12 22 295 M20
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
INDUSTRIES B.V.
INDUSTRIES B.V.
Selection Chart AKAY INDUSTRIES
2
1.0
7
7020
20
3 4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500
21.5 3 4 5 6 108 20 30 40 50 60 80 100 140
30 40 50 60 80 100 150 200 300 400 600 800 1000 1500 2000
30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500
60
50
40
30
20
15
10
9
8
7
3
4
5
6
10
20
15
25
30
40
50
60
80
100
150
200
200 250 300
600 800 1000
3000 4000
2000 3000
40/26
50/26
50/13
50/16
H(m)
40/13
32/16
32/13
40/2032/20 50/20
65/13
30/26
40/32
65/20
80/1665/16
100/16
65/3250/32
80/40
65/26
n=1450rpm
Selection charts of WF stage centrifugal pump
H(ft)
Q[US.gpm]
Q [IM.gpm]
Q[l/s]
Q[m /h]3
40/16
80/26
80/20100/20
100/26
80/32100/32
100/40
125/20
125/26
150/20
100/32
150/26
150/32
150/40125/40200/40 250/40
250/32
200/32
2
10
12
30
120
20
40
380
75 201510 4030 706050 80 200150 400300100
3 4 5 6 7 8 10 14 16 18 20 25 30 35 40 50 60 70 80 100 120
12
14
16
18
20
25
30
40
50
60
70
80
90
100
50
60
70
80
100
150
200
300
90
40 50 60 80
30 40 50 60
100 200 300 400 500 600 800 1000 1400
80 100 200 300 400 500 600 800 1000 1400
140
160
450
H(m)
n=2900rpm
H(ft)
Q [IM.gpm]Q[US.gpm]
Selection charts of WF stage centrifugal pump
Q[l/s]
Q[m /h]3
32/13 40/1350/13
50/1640/1632/16
32/20 40/20 50/20
32/26
65/16
40/26
65/13
80/16
65/20
80/20
50/2665/26
80/26
100/26
100/20
125/20
100/16
40/32H80/32H65/32H
100/32H
50/32H
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
INDUSTRIES B.V.
INDUSTRIES B.V.
INDUSTRIES B.V.
PUMPINGTECHNOLOGY08
Waterflo WF Series Back pull-outEnd Suction Centrifugal pump
INDUSTRIES B.V.
INDUSTRIES B.V.
Selection Chart AKAY INDUSTRIES
120
17
14.56 7.2
26
23
20
29
2.4
8.4 9.6
3.6
12
58
43
36
72
87
6
18
4.8 7.2
24
8.4
36
115
100
145
130
233
204
173
24 36
48
72
72
48
60
60
96
96
84
96
16.8
48
9.6
36
12 14.5
60
21.619.2
72
24
84
48
180120
30 36 42 60 72
240
144
360
96
480
120
115
52
100
87
72
130
145
290
216
120
240 360
240
720480
360 480
600 960
600 720 960
1200
1200
1720
1720
435
655
554
Selection charts of WF single stage centrifugal pump
40/20
40/16
40/13
H(m)32/20
32/16
32/13
n=3500rpm
32/26
100/16
100/20
65/2050/20
50/16
50/13
80/16
65/13
65/16
80/20
125/20
Q[m /h]
Q[l/s]
3
H(ft)
65/2650/2640/26
80/26
100/26
Q[US.gpm]Q [IM.gpm]
44
4.4
2.9
7.3
5.8
8.7
1.2
3.6 4.8
29.1
13.1
10.2
11.7
14.5
21.8
1.8
6.0 7.2 9.6
2.4
1812
3.6 4.8 6
24
7.2
58
73
87
10148
24
24 36
36 60
72
48
60
72
96
1800
480
36
12060
9.6
36 48
12
72
24
96 240
48
180
60 96
360
72 120
120
120
96
180
180
360
240
240
360
480 960
600
720
480 720 1200960
1200 1800
300
720600
170 240
960 1200
360
15
11
22
29
58
36
44
86
72
115
3600
4800
2400
2400 3600
290
216
14550/32
50/20
50/13
30/26H(m)
32/13
32/20
32/16
40/13
40/26
40/20
40/1650/16
n=1750rpm
40/32
150/32100/3280/32
100/16
65/26
65/16
65/20
65/13
50/26
80/16
80/26
65/32
80/20
125/32
125/26
125/20
100/26
100/20
150/26
150/20
80/40 125/40100/40
150/40
Q[m /h]
Q[l/s]
H(ft)
250/32
200/32
3
Q[US.gpm]
Q [IM.gpm]
250/40200/40
Selection charts of WF single stage centrifugal pump
Akay Industries B.V.
Headquarters T. +31 (0) 181-473872Seggelant Noord 11 F. +31 (0) 84-75620663237 MG Vierpolders E. [email protected] Netherlands W. www.akaypumps.com