GMP

Pagina 1

PDC

>> Hf (friction losses) - Selection pipes and appendagesMain data Main resultsStatic head Hs (m) Discharge (m3/h) Total Dyanimac Head TDH (m) System efficiency Total efficiency (pump+system)

Pumping system elements>>>foot valve. . . . . . . . . . . diameter (mm) 200 elbow 90 degr . . . . . diameter (mm) 999 suction pipe . . . length (m) 6 enlargement/reducer diameter-a (mm) 200 enlargement/reducer diameter-a (mm) 200 elbow 90 degr . . . . . diameter (mm) 200 discharge pipe/hose length (m) 6 exit losses diameter (mm) 200 radius (en d) 2 matriel diameter (mm) 200 diameter-b (mm) 200 diameter-b (mm) 200 radius (en d) 1 matriel K-friction factor

Elements ajouter au rseau(Choisissez nom, diamtre, et K=friction du tableau #Accessoires!A29:O69 element (nom?) . . . . . . diamtre (mm) 200 element (nom?) . . . . . . diamtre (mm) 200 element (nom?) . . . . . . diamtre (mm) 200 K-friction 0 K-friction 0 K-friction 0

Pagina 2

PDC

element (nom?) . . . . . .

diamtre (mm) 200

K-friction 0 K-friction 0 K-friction 0 K-friction 0 K-friction 0 K-friction 0 K-friction 0

element (nom?) . . . . . .

diamtre (mm) 200

element (nom?) . . . . . .

diamtre (mm) 200

element (nom?) . . . . . .

diamtre (mm) 200

element (nom?) . . . . . .

diamtre (mm) 200

element (nom?) . . . . . .

diamtre (mm) 200

element (nom?) . . . . . .

diamtre (mm) 200

Pagina 3

PDC

ection pipes and appendages1.00 450 4.53 22% 13%Suggestions for dimensions of pumpset elements (indicatively) Pump (mm) Foot valve (mm) Pipes/hoses (mm) 250 325 350

Pressure loss (m)

Calculation available NPSHDataAltitude (m) 260 40 1.0 Water temperature (degr. C) Static suction head (m)

1.61 0.00 0.42 0.00 0.00 0.26 0.42 0.81

Results available NPSH (m) 6.30

0.00 0.00 0.00

pression atmosphrique (mbar) pression vapeur (mbar) densit eau (kg/m3)

981 71 992

Pagina 4

PDC

Altitude-Pression atmospherique Press. atm. (mbar) altitude (m) 0 1000 2000 3000 4000

0.00 0.00 0.00 0.00

1013 895 790 700 620

Temperature-Pression vapeur (eau en mbar) pression vapeur 6.1 23.4 73.7 199.2 473.6 temp (degr. C) 0.01 20 40 60 80

0.00 0.00 0.00

Temperature-densit (eau, kg/m3) r temp (degr. C) 999.8 998.3 992.3 983.2 971.6 0.01 20 40 60 80

Pagina 5

PDC

Pagina 6

PDC

Pagina 7

Pompes

Donnes pompes No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

No.

60

Marque/type 100HW-12 100HW-5 100HW-8(4HBC-35) 100KB-6-6 125HW-8 150HW-12 150HWG-5 (Wuxi) 150HW-5(tianyi) 6HBG-35 (DPS Pumps) 150HW-6 150HW-8 200HW-10 200HW-12 200HW-5 200HW-8(8HBC-35) 250HW-7 3TC-16 50KB-15-3 80KB-10-3 80KB-13-4 8YZ 8YZ-2A Antor SNK 150-200 Batescrew P8M BC150 BE CM-6 A BSA BS-C4 Caprari Caprari BHR200-D STANDARD 1750 DA-IRRI/SIPA STANDARD 3000 FSR-100 STANDARD 2900 FSR-150 STANDARD 1450 FSR-50 STANDARD 2900 FSR-80 STANDARD 2100 Greaves emb-6 Guinard Etanorm 150-200 (219/158) STANDARD 1750? Ingersoll-Dr. ME150-200 STANDARD 1800 Interpolation STANDARD 1800 IRRI (Aban) single-stage STANDARD N/A IRRI (Aban) two-stage STANDARD N/A Johnson CN 150-125 (158mm) STANDARD 2400 Johnson CN 150-125 (172 mm) STANDARD 2400 Johnson CN 150-160 (176 mm) STANDARD 2400 Johnson CN 150-160 (190 mm) STANDARD 2400 Johnson CN 200-160 (181 mm) STANDARD 1800? Johnson CN 200-160 (205 mm) STANDARD 1800? Kirloskar MF 25-25 N/A 1450 Kirloskar MF17.5-20 (198,5 mm)STANDARD 1750 Kirloskar MF17.5-20 (236 mm) STANDARD 1750 Kirloskar MF200 (198 mm) CONTRAIRE 1450 Kirloskar MF200 (220 mm) CONTRAIRE 1450 Kirloskar NW1+ CONTRAIRE N/A Kirloskar NW9ME CONTRAIRE 1800?

Valeurs estimes en rouge USD kg Rotation n-max Prix Masse STANDARD 2900