CanadianWelding Bureau

CanadianInstitute of Steel

Construction

CanadianConstructionAssociation

Steel Plus Network®

American Institute of Steel Construction Inc.

Steel Deck Institute

Steel Joist Institute

APP R O VAL

CANA

DIAN

WELDING

BUREAU

www.canammanac.com

Engineered Solutions

PURLINS AND GIRTS

Engineered Service

Pri

nte

d in

Can

ada

05/2

000

Nova SteelStoney Creek, ON

MISSION

OUR PRODUCTS AND SERVICESOur entire team is able to suggest optimal and

innovative solutions for bid preparation, project design and manufacturing.

Our production equipment has always been atthe leading edge of technology. Canam has invested in computer-aided manufacturing and numerically-controlled equipment.

We offer a wide range of metal constructioncomponents including joists, trusses, hambro® joists,metal plates, purlins and girts, Murox building systems,Sun steel buildings and variable inertia girders.

Our exceptional service also includes our abilityto deliver just in time and at your convenience. With

our fleet of tractors and semitrailers, we assure youthat we will meet the requirements of your constructionschedule. Depending on the region and the deliverysite, we can transport pieces with dimensions of up to 16 ft. in width by 120 ft. in length.

WARNING

Although every effort was made to ensure that alldata in this catalogue is factual and that the numericalvalues are accurate to a degree consistent with currentstructural design practice, Canam Steel does notassume responsibility for errors or oversights that mayresult from the use of the information contained herein.Anyone making use of the contents of this catalogueassumes all liability arising from such use. Allsuggestions for improvements to this publication willreceive full consideration for future printings.

To be recognized as the best designer and manufacturer of steel joists and metal constructioncomponents, through flexibility, product quality and exceptional service.

3

INTRODUCTION

Canam Steel is pleased to present a new series of coldformed channels, C’s and Z’s used as purlins and girts.

ADVANTAGES

Canam’s “C” and “Z” shapes are very cost effectivemembers. Manufactured in a new, fully automated facility, they are cut to length, punched, formed and painted on a single line, producing substantial saving in materials andproduction time.

The sections are supplied painted either red or gray and are in conformance with the CPMA-1-73A standard.

MATERIAL

All purlins and girts are cold formed from high-strengthsteel to minimize weight while maximizing capacity. The steelconforms to the requirements of ASTM Standard A607 Grade50, Steel Sheet and Strap, high-strength, Low Alloy Columbiumor Vanadium, or both, Hot Rolled and Cold Rolled.

DESIGN

The “C” and “Z” sections have been designed in accordance with the Standard 1996 AISI Specifications.

TOLERANCES

Fabricationtolerances for the coldformed “C” and “Z” shapesare in accordance withtolerances specified in theStandard CAN/CSA-A660-M91, Certification ofManufacturers of SteelBuilding Systems. Materialthickness tolerances are in accordance with the 1996 AISI Cold-Formed SteelSpecifications Article A3.4.

4

COLD FORMED “C” CHANNELS

b

t

d

e

S.C.

t/2

x

C.G.

Y

Y

XX

hR

SECTIONS PROPERTIES

d b h t Ix Sx rx Iy Sy ry x e AC 6 x 2.9 6 2.75 1.0 0.060 4.480 1.322 2.397 0.886 0.487 1.066 0.931 1.449 0.780C 6 x 3.5 6 2.75 1.0 0.075 5.535 1.797 2.390 1.087 0.595 1.059 0.923 1.442 0.969C 6 x 4.0 6 2.75 1.0 0.090 6.564 2.188 2.383 1.280 0.698 1.052 0.916 1.434 1.156C 6 x 4.7 6 2.75 1.0 0.105 7.568 2.523 2.375 1.466 0.796 1.045 0.908 1.427 1.341C 6 x 5.6 6 2.75 1.0 0.120 8.546 2.849 2.368 1.644 0.889 1.038 0.901 1.419 1.524C 8 x 3.4 8 2.75 1.0 0.060 8.760 1.844 3.120 0.976 0.502 1.042 0.807 1.333 0.900C 8 x 4.0 8 2.75 1.0 0.075 10.841 2.561 3.112 1.198 0.614 1.035 0.800 1.326 1.119C 8 x 4.7 8 2.75 1.0 0.090 12.878 3.207 3.104 1.411 0.721 1.028 0.793 1.318 1.336C 8 x 5.4 8 2.75 1.0 0.105 14.873 3.718 3.096 1.616 0.822 1.021 0.785 1.310 1.551C 8 x 6.1 8 2.75 1.0 0.120 16.826 4.207 3.088 1.812 0.919 1.013 0.778 1.303 1.764C 9 x 4.6 9 3.50 1.0 0.075 16.554 3.034 3.560 2.207 0.891 1.300 1.024 1.644 1.307C 9 x 5.4 9 3.50 1.0 0.090 19.695 3.794 3.552 2.608 1.050 1.292 1.017 1.636 1.561C 9 x 6.3 9 3.50 1.0 0.105 22.779 4.669 3.544 2.996 1.203 1.285 1.010 1.629 1.814C 9 x 7.2 9 3.50 1.0 0.120 25.808 5.539 3.536 3.371 1.350 1.278 1.002 1.621 2.064C 9 x 8.0 9 3.50 1.0 0.135 28.782 6.285 3.528 3.733 1.490 1.271 0.995 1.613 2.312C 10 x 3.8 10 3.50 1.0 0.060 17.062 2.540 3.921 1.853 0.734 1.292 0.976 1.600 1.110C 10 x 4.7 10 3.50 1.0 0.075 21.155 3.414 3.913 2.281 0.901 1.285 0.969 1.593 1.382C 10 x 5.8 10 3.50 1.0 0.090 25.181 4.282 3.905 2.696 1.062 1.278 0.962 1.585 1.651C 10 x 6.7 10 3.50 1.0 0.105 29.138 5.290 3.897 3.097 1.216 1.270 0.954 1.577 1.919C 10 x 7.6 10 3.50 1.0 0.120 33.029 6.382 3.889 3.485 1.365 1.263 0.947 1.570 2.184C 10 x 8.5 10 3.50 1.0 0.135 36.852 7.244 3.880 3.860 1.508 1.256 0.940 1.562 2.447C 12 x 5.4 12 3.50 1.0 0.075 32.468 4.172 4.604 2.408 0.917 1.254 0.874 1.500 1.532C 12 x 6.4 12 3.50 1.0 0.090 38.675 5.257 4.596 2.846 1.081 1.247 0.867 1.492 1.831C 12 x 7.4 12 3.50 1.0 0.105 44.788 6.532 4.587 3.269 1.238 1.239 0.860 1.485 2.129C 12 x 8.4 12 3.50 1.0 0.120 50.807 7.942 4.578 3.679 1.390 1.232 0.853 1.477 2.424C 12 x 9.4 12 3.50 1.0 0.135 56.732 9.219 4.569 4.074 1.536 1.224 0.847 1.470 2.717C 14 x 7.0 14 3.50 1.0 0.090 55.834 6.230 5.269 2.969 1.095 1.215 0.789 1.411 2.011C 14 x 8.1 14 3.50 1.0 0.105 64.697 7.776 5.259 3.411 1.255 1.208 0.783 1.404 2.339C 14 x 9.3 14 3.50 1.0 0.120 73.436 9.498 5.250 3.838 1.409 1.200 0.777 1.396 2.664C 14 x 10.4 14 3.50 1.0 0.135 82.050 11.085 5.241 4.250 1.557 1.193 0.770 1.389 2.987

Ix = moment of inertia about X-X axis (in.4)Sx = elastic section modulus about X-X axis (in.3)rx = radius of gyration about X-X axis (in.)Iy = moment of inertia about Y-Y axis (in.4)

Sy = elastic section modulus about Y-Y axis (in.3)ry = radius of gyration about Y-Y axis (in.)x = distance from center of web to center

of gravity (in.)e = distance from center of web to shear center (in.)

Normal units are in parenthesis.

d = depth of section (in.)b = flange width (in.)h = length of lip (in.)R = average bent radius (in.)t = steel thickness (in.)

A = area of section (in.2)C.G. = center of gravityS.C. = shear center

EXAMPLE: C 9 x 7.2Nominal depth = 9 in.Nominal weight = 7.2 plf

5

SECTIONS DIMENSIONS PROPERTIES

d b h t Ix Sx rx Iy Sy ry r min teta AZ 6 x 3.0 6 3 0.95 0.060 4.825 1.373 2.437 2.145 0.623 1.625 0.924 -0.535 0.81Z 6 x 3.6 6 3 0.95 0.075 5.975 1.792 2.430 2.653 0.772 1.619 0.920 -0.535 1.01Z 6 x 4.3 6 3 0.95 0.090 7.101 2.216 2.423 3.143 0.916 1.612 0.916 -0.534 1.21Z 6 x 5.1 6 3 0.95 0.105 8.203 2.689 2.417 3.619 1.057 1.605 0.912 -0.533 1.40Z 6 x 5.8 6 3 0.95 0.120 9.283 3.094 2.410 4.082 1.195 1.598 0.908 -0.532 1.60Z 6 x 6.5 6 3 0.95 0.135 10.340 3.447 2.403 4.533 1.330 1.591 0.904 -0.532 1.79Z 8 x 3.4 8 3 0.95 0.060 9.355 1.904 3.168 2.145 0.623 1.517 0.954 -0.372 0.93Z 8 x 4.2 8 3 0.95 0.075 11.603 2.524 3.160 2.653 0.772 1.511 0.950 -0.372 1.16Z 8 x 4.9 8 3 0.95 0.090 13.810 3.214 3.153 3.143 0.916 1.504 0.946 -0.371 1.39Z 8 x 5.9 8 3 0.95 0.105 15.980 3.927 3.146 3.619 1.057 1.497 0.942 -0.370 1.61Z 8 x 6.7 8 3 0.95 0.120 18.114 4.528 3.139 4.082 1.195 1.490 0.937 -0.369 1.84Z 8 x 7.5 8 3 0.95 0.135 20.210 5.053 3.131 4.533 1.330 1.483 0.933 -0.368 2.06Z 9 x 4.4 9 3 0.95 0.075 15.270 2.885 3.514 2.653 0.772 1.465 0.952 -0.318 1.24Z 9 x 5.2 9 3 0.95 0.090 18.185 3.692 3.506 3.143 0.916 1.458 0.948 -0.317 1.48Z 9 x 6.2 9 3 0.95 0.105 21.054 4.596 3.499 3.619 1.057 1.451 0.943 -0.316 1.72Z 9 x 7.1 9 3 0.95 0.120 23.879 5.306 3.492 4.082 1.195 1.444 0.939 -0.315 1.96Z 9 x 8.0 9 3 0.95 0.135 26.658 5.924 3.484 4.533 1.330 1.437 0.935 -0.314 2.20Z 10 x 4.6 10 3 0.95 0.075 19.555 3.247 3.861 2.653 0.772 1.422 0.949 -0.276 1.31Z 10 x 5.5 10 3 0.95 0.090 23.299 4.170 3.854 3.143 0.916 1.415 0.945 -0.275 1.57Z 10 x 6.6 10 3 0.95 0.105 26.989 5.215 3.846 3.619 1.057 1.408 0.941 -0.274 1.82Z 10 x 7.5 10 3 0.95 0.120 30.623 6.125 3.838 4.082 1.195 1.401 0.936 -0.273 2.08Z 10 x 8.4 10 3 0.95 0.135 34.204 6.841 3.831 4.533 1.330 1.394 0.932 -0.272 2.33Z 12 x 5.2 12 3 0.95 0.075 30.132 3.969 4.540 2.653 0.772 1.347 0.938 -0.214 1.46Z 12 x 6.2 12 3 0.95 0.090 35.928 5.127 4.532 3.143 0.916 1.340 0.933 -0.214 1.75Z 12 x 7.3 12 3 0.95 0.105 41.648 6.455 4.524 3.619 1.057 1.334 0.929 -0.213 2.03Z 12 x 8.3 12 3 0.95 0.120 47.292 7.664 4.516 4.082 1.195 1.327 0.925 -0.212 2.32Z 12 x 9.4 12 3 0.95 0.135 52.862 8.745 4.508 4.533 1.330 1.320 0.920 -0.211 2.60Z 14 x 6.8 14 3 0.95 0.090 52.055 6.082 5.195 3.143 0.916 1.276 0.918 -0.172 1.929Z 14 x 8.0 14 3 0.95 0.105 60.378 7.696 5.186 3.619 1.057 1.270 0.913 -0.171 2.245Z 14 x 9.1 14 3 0.95 0.120 68.601 9.187 5.178 4.082 1.195 1.263 0.909 -0.170 2.559Z 14 x 10.3 14 3 0.95 0.135 76.724 10.539 5.169 4.533 1.330 1.257 0.904 -0.170 2.871

C.G. & S.C.

h

b

t

W

W

Xd X

Z

Z

Y

Y

R

O

t/2

COLD FORMED “Z”

Ix = moment of inertia about X-X axis (in.4)Sx = elastic section modulus about X-X axis (in.3)rx = radius of gyration about X-X axis (in.)Iy = moment of inertia about Y-Y axis (in.4)

Sy = elastic section modulus about Y-Y axis (in.3)ry = radius of gyration about Y-Y axis (in.)

rmin = radius of gyration about Z-Z axis (in.)teta = angle between Z-Z axis and Y-Y axis (radians)

Normal units are in parenthesis.

d = depth of section (in.)b = flange width (in.)h = length of lip (in.)R = average bent radius (in.)t = steel thickness (in.)

A = area of section (in.2)C.G. = center of gravityS.C. = shear center

EXAMPLE: Z 8 x 4.9Nominal depth = 8 in.Nominal weight = 4.9 plf

6

STANDARD DETAILS FOR CANAM CHANNELS AND “Z”

Slotted Holes 9/16" x 3/4"1 1/2"

4"=

=

d <

8 1

/4"

==

1 1/2"

3"3"

d <

8 1

/4"

22 1/8"1 1/2" 4"

4"=

==

=

1 1/2"

Overlap joint for sections < 8 1/4"

Overlap joint for sections > 8 1/4"

22 1/8"

3"3"

22 1/8"1 1/2" 4" 1 1/2"22 1/8"

==

==

TYPICAL DETAILS FOR “Z” OVERLAP JOINTS OVER BEARING

STANDARD HOLES FOR “C” AND “Z”

LG LG

LGLG

LGLG

FRAME ATTACHMENT ANGLE

LC

LC

LC

ANGLE CLOSURES

Mark Description (in.) Length (ft.)

LC 3.30 L 3 x 3 x 0.09 20

LC 4.35 L 4 x 3.5 x 0.09 20

LC 3.20 L 3 x 2 x 0.09 20

Section Mark Description (in.) Length (in.) Holes (in.)

LG 6.9 L 3 x 2 x .12 5 1/2 9/16

LG 8.9 L 3 x 2 x .12 7 1/2 9/16LG 8.13 L 3 x 2 x .12 7 1/2 13/16

LG 10.9 L 3 x 2 x .12 9 1/2 9/16LG 10.9 L 3 x 2 x .12 9 1/2 13/161 3/4" 3"

2"

1 3/4"3"

1 3/4" 1 3/4"4"

2"

3/4" 3/4"4"

2"

steelCorporation

Saint-Gédéon, QCHead office and main plant115, boul. Canam NordSaint-Gédéon (Québec) G0M 1T0Telephone: (418) 582-3331Fax: (418) 582-3381

Boucherville, QCPlant and sales office and Murox® sales office200, boul. IndustrielBoucherville (Québec) J4B 2X4Telephone: (450) 641-2820Fax: (450) 641-3132

Calgary, ABPlant and sales office223 - 53rd Avenue S.E.Calgary, Alberta T2H 0N2Telephone: (403) 252-7591Fax: (403) 253-7708

Laval, QC Plant and sales office807, rue MarshallLaval (Québec) H7S 1J9Telephone: (514) 337-8031Fax: (450) 668-3091

Mississauga, ON - Plant and sales office1739 Drew RoadMississauga, Ontario L5S 1J5 Telephone: (905) 671-3460Fax: (905) 671-3924

Québec, QCStructal 1982 inc. Head office and main plant1445, rue du Grand TroncQuébec (Québec) G1N 4G1Telephone: (418) 683-2561Fax: (418) 688-8512

Saint-Joseph, QC - Machine shop125, rue du ParcSaint-Joseph (Québec) G0S 2V0 Telephone: (418) 397-8070Fax: (418) 397-8017

Boucherville, QCEngineering, credit office and hambro® sales office270, chemin Du TremblayBoucherville (Québec) J4B 5X9 Telephone: (450) 641-4000Fax: (450) 641-4001

Boucherville,QCSales office - Steel joists and steel deck200, boul. IndustrielBoucherville (Québec) J4B 2X4Telephone: (450) 641-8770Fax: (450) 641-8769

Edmonton, AB - Sales office8832 60th AvenueEdmonton, Alberta T6E 6A6Telephone: (780) 448-0939Fax: (780) 490-0838

Kingston, ON - Murox® sales office and Sun Building Systems208 Glen Castle RoadKingston, Ontario K7M 4N6Telephone: (613) 384-8360Fax: (613) 389-3849

Laval, QCSales office - Sun Building Systems807, rue MarshallLaval (Québec) H7S 1J9Telephone: (450) 629-1547

1-888-819-0227Fax: (450) 663-6511

Mississauga, ON - Sales officeMurox® and Sun Building Systems1755 Drew RoadMississauga, Ontario L5S 1J5 Telephone: (905) 612-9796

1-877-366-7796Fax: (905) 671-8399

Moncton, NB - Sales office95 Foundry StreetHeritage Court, Suite 417Moncton, New Brunswick E1C 5H7Telephone: (506) 857-3164Fax: (506) 857-3253

Sainte-Foy, QCEngineering and sales office660, rue Graham-BellSainte-Foy (Québec) G1N 4C1Telephone: 1-800-681-4440Fax: (418) 687-3364

Surrey, BC - Sales office314 - 9801 King George HighwaySurrey, British Colombia V3T 5H5Telephone: (604) 583-2177Fax: (604) 584-8227

Ville de Saint-GeorgesMurox® sales office11535, 1re Avenue, bureau 500Ville de Saint-Georges, Québec G5Y 7H5Telephone: (418) 228-8031Fax: (418) 227-4584

Head office, main plant and Canam Murox®, Sun Building Systems sales offices4010 Clay Street, P.O. Box 285Point of Rocks, Maryland 21777-0285Telephone: (301) 874-5141Fax: (301) 874-5685

Florida - Plant and sales office140 South Ellis RoadJacksonville, Florida 32254Telephone: (904) 781-0898Fax: (904) 781-2004

Indiana - Plant and sales office2341 South 30th Street, P.O. Box 5057Lafayette, Indiana 47903-5057Telephone: (765) 477-7764Fax: (765) 474-4042

Missouri - Plant and sales office2000 West Main Street Washington, Missouri 63090-1008Telephone: (636) 239-6716Fax : (636) 239-4135

Ohio - Plant and sales office555 North Yearling RoadColumbus, Ohio 43213Telephone: (614) 235-9805Fax: (614) 235-9901

Washington - Plant and sales office2002 Morgan RoadSunnyside, Washington 98944Telephone: (509) 837-7008Fax: (509) 839-0383

Alabama - Sales office31 Newport LandingLowndesboro, Alabama 36752Telephone: (334) 278-3127Fax: (334) 278-3128

Alabama - Sales office701 Branch AvenueSylacauga, Alabama 35150Telephone: (256) 208-0237Fax: (256) 781-4090

Arizona - Sales office8687 E. Via de Ventura, Suite 101Scottsdale, Arizona 85258Telephone: (480) 348-1112Fax: (480) 348-1117

California - Sales office3532 Marin DriveIrvine, California 92606Telephone: (949) 786-3315Fax: (949) 786-4201

Florida - hambro® sales office450 East Hillsboro BoulevardDeerfield Beach, Florida 33441Telephone: (954) 571-3030Fax: (954) 571-3031

Georgia - Sales office150 Stanley Court Suite CLawrenceville, Georgia 30045Telephone: (770) 682-7815Fax: (770) 682-9604

Illinois - Sales office7501 Lemont Road, Suite 315Woodridge, Illinois 60517-2660Telephone: (630) 910-1700Fax: (630) 910-1785

Indiana - Sales office228 East 10th StreetIndianapolis, Indiana 46202Telephone: (317) 634-0414Fax: (317) 634-0415

Kansas - Sales office6803 West 64th Street, Suite 111Overland Park, Kansas 66202Telephone: (913) 384-9809Fax: (913) 384-9816

Maine Murox Sales office andSun Building Systems16 Cardinal LanePoland Spring, Maine 04274Telephone: (207) 998-4068Fax: (207) 998-2065

Maryland - Sales officeP.O. Box 296Phoenix, Maryland 21131-0296Telephone: (410) 472-4327Fax: (410) 472-4827

Massachusetts - Sales office 50 Eastman StreetEaston, Massachusetts 02334-1245Telephone: (508) 238-4500Fax: (508) 238-8253

Michigan - Sales office1063 S. State Road, Suite 7Davison, Michigan 48423 Telephone: (810) 653-3506Fax: (810) 653-3906

Minnesota - Sales office768-103 Twelve Oak Center15500 Wayzata Blvd.Wayzata, Minnesota 55391Telephone: (952) 475-9165Fax: (952) 475-2710

New Jersey - Sales office3 Page Street, P.O. Box 447Madison, New Jersey 07940Telephone: (973) 822-3600Fax: (973) 822-0730

New York - Sales office139 Hawthorne WayChittenango, New York 13037-1010Telephone: (315) 687-5870Fax: (315) 687-3701

Oregon - Sales office2081 Holcom Springs RoadGold Hill, Oregon 97525Telephone: (541) 855-9057Fax: (541) 855-2027

Pennsylvania - Sales office3280 St. Andrews DriveChambersburg, Pennsylvania 17201Telephone: (717) 263-7432Fax: (717) 263-7542

102 Bremen LaneMcMurray, Pennsylvania 15317Telephone: (724) 942-6262Fax: (724) 942-4035

1012 Hampstead RoadWynnewood, Pennsylvania 19096Telephone: (610) 896-4790Fax: (610) 896-4815

South Carolina - Sales office112 Mallard Lakes CourtLexington, South Carolina 29072Telephone: (803) 996-3200Fax: (803) 996-3232

Tennessee - Sales office8620 Trinity Road, Suite 207 Cordova, Tennessee 38018Telephone: (901) 759-1524Fax: (901) 759-3969

Texas - Engineering office329 North West RenfroBurleson, Texas 76028-6225Telephone: (817) 426-1770Fax: (817) 426-1780

Sales office6969 Hollister, Suite 1205Houston, Texas 77040Telephone: (713) 895-0733Fax: (713) 895-0778

Utah - Sales office1332 S. 350 East Garland, Utah 84312Telephone: (435) 257-2234Fax: (435) 257-2235

Virginia - Sales office11008 Blake LaneBealeton, Virginia 22712Telephone: (540) 439-4344Fax: (540) 439-4345

Washington - Sales office240 N.W. Gilman Blvd., Suite GIssaquah, Washington 98027Telephone: (425) 392-2935Fax: (425) 392-3149

CalcuttaEngineering office5A & 5B Circular Mansion 222 A.J.C. Bose RoadCalcutta - 700 017, IndiaTelephone: (33) 280-9740Fax: (33) 280-2435

BrasovEngineering office3 - 5 N.D. Cocea, Etaj-2-32200 Brasov, RomaniaTelephone: (68) 47 11 30Fax: (68) 41 92 17

Monterrey, NLHead office and main plantCarretera Monterrey-Laredo km. 22.450Ciénega de Flores, Nuevo Leon, Mexico C.P. 65550 Telephone: (8) 329-0100Fax: (8) 329-0110

Ciudad Juarez, ChihPlantCarretera Panamericana # 9920Colonia Puente AltoCiudad Juarez, ChihuahuaMexico 32695Telephone: (16) 29 09 38Fax: (16) 33 13 48

Hermosillo, SonoraSales officeCalle Papagos Lote 2 y 3entre Carretera a Sahuaripa YY Pimpas Parque, Ind. Tercera stapaHermosillo, Sonora, MexicoTelephone: (62) 51 02 15Fax: (62) 51 00 02

Mexico, DFSales officeLuz Saviñon #13, Piso 6, Colonia del ValleDel. Benito Juarez, C.P. 03100Mexico, DFTelephone: (55) 36 25 20Fax: (55) 36 25 29

San SalvadorSales officeAvenida «A» No. 243 San SalvadorCalle de Colonia San Jose Zona Cine VariedadesSan Salvador, El Salvador C.A.Telephone: (503) 226-2948 Fax: (503) 226-0369

NiortHead office and main plant4, rue Blaise Pascal, boîte postale 861679026 Niort Cedex 9, FranceTelephone: (5) 49 04 47 00Fax: (5) 49 79 19 06

JarnyPlant and sales office10, route de Tichémont, boîte postale 654802, Jarny Cedex, FranceTelephone: (3) 82 47 17 00Fax: (3) 82 47 17 01

DE MEXICO

Canada «1»

United States «1»

India «91»

Romania «40»

Mexico «52»

France «33»

El Salvador«503»

http://www.canammanac.com

CanadianWelding Bureau

CanadianInstitute of Steel

Construction

CanadianConstructionAssociation

Steel Plus Network®

American Institute of Steel Construction Inc.

Steel Deck Institute

Steel Joist Institute

APP R O VAL

CANA

DIAN

WELDING

BUREAU

www.canammanac.com

Engineered Solutions

PURLINS AND GIRTS

Engineered Service

Pri

nte

d in

Can

ada

05/2

000

Nova SteelStoney Creek, ON