pvc pipe wrap tape
TRANSCRIPT
Thickness: 10 Mil & 20 MilTensile strength (lbs/in width): 20Adhesion (oz/in width) to primed steel: 110Adhesion (oz/in width) to un-primed steel: 75Elongation: 200%Temperature range: -30 degrees F to 140 degrees FLow Lead Product
UPC Approved; Provides excellent insulation; Durable polyethylene backing; Ideal for iron and steel; Corrosion resistant. It has a super tack adhesion for extra holding powerIt is used a lot by underground pipe contractors and plumbers to protect iron and steel pipe from corrosion due to high acidic or "hot soils".
It is also used to protect pvc pipe from corrosion due to ultraviolet rays in above ground installations.
This tape is also used in the oilfield industry to wrap above and underground pipes to prevent corrosion due to the high methane levels in the soil around oil fields.
PVC Pipe Wrap TapeUPC Approved
UPC
®
UniformPlumbingCode
PIPE WRAP2” x 100’ x 10 Mil
7 581002 28140
210
U
UniformPlumbingCode
10 MIL
- COLD WEATHER VINYL - CORROSION PROTECTION -
UPCApprovedPC
®SurfaceMarked
L.H. Dottie CompanyCommerce, CA 90040
lhdottie.comChina
Moisture Absorption Rate: less than 0.30%Dielectric Strength: 1000 volts per mil
Adhesion to Backing: 20oz per inch of widthElongation at break: 200%
Tensile Strength: 20 lbs per inch width
lhdottie.comLPIPEWRAP ©2013