Anchor Tester - QualiAnchor 2000

Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211

info@qualitest-inc.com | www.WorldofTest.com

USA Canada UAE Mexico India Hong Kong

www.WorldofTest.com/anchor-tester-qualianchor-2000

Meeting and exceeding the BS 5080 standard.QualiAnchor 2000 - Load Verification Testing Systems enable engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 25kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analog gauge, making the tester very reliable. The choice of 5 gauge capacities means the precision of readings can be optimised for each application. Load spreading bridges and the pyramid stool keep reaction loads away from the fixing. Fixings up to M16 may be located directly in the tester, while a variety of adaptors enable a wide range of other types and sizes to be tested.

Applications • Expansion, resin and undercut anchors

Tester Features • 0-25kN range • 5 gauge capacities • 0-5kN, 0-10kN, 0-15kN, 0-20kN, 0-25kN • Interchangeable gauges with quick release coupling (Master kit and Export standard kit) • Movement indicator scale: 50mm standard, 100mm option. • Lightweight aluminium construction • Weight 2.2kg • Pulling jaw can be rotated through 360° for operation in confined spaces

• Cast in sockets and channel • Roofing screws • Structural anchors for safety harness eyebolts (class A1 anchor devices to BS EN 795 and BS 7883) • Frame anchors, screw fixings, cavity fixings • Remedial wall ties (DD 140) • Safety anchorages for scaffold ties • Powder actuated fasteningsNote: Special adaptors may be required for some of these applications. We will be pleased to advise on this.

TESTING TECHNOLOGIES

Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211

info@qualitest-inc.com | www.WorldofTest.com

USA Canada UAE Mexico India Hong Kong

Gauge Features • Traceable Calibration Certificate to National Standards • The maximum load pointer is re-settable • Rubber casing protects against shocks • Shatterproof glass • Built in protection against sudden load release • Coupler system desirable for keeping tester in service when gauges are being re-calibrated

Pull-out Load Range 0-25kN/lb/fEffective Stroke 50mm / 100mmStroke Scale 0-50mm / 0-100mmLoad Gauge interchangeableCasing aluminiumLoading Jaw pivot able through 360° with Spring returnOperating Handle standard size or nut option For use in a confined spaceLoad Gauge Range Available 0-5, 0-10, 0-15, 0-20 & 0-25kN/lb/f (5600lbf)Load Gauge Accuracy Accurate to +/- 2.5% fsdLoad Gauge Indication of pull-out load Calibrated in kN Traceable calibration certificate supplied with each gauge Protective rubber cover Impact resistant glass Protection against sudden load relief (i.e. sudden failure of fixing)Weight 4.85 lb (2.2kg)

Specifications

TESTING TECHNOLOGIES