qhse officers and managers - cape...

2
Fire is destructive and catastrophic in nature and it is a known fact that fire occurrence is often unpredictable. Fire claims thousands of human lives each year and injures more worldwide. Fire in petroleum facilities especially can lead to significant losses including life, financial, property and subsequently damaging the environment which will lead to catastrophic consequences. These accidents not only destroy facilities, but also may hit nearby facilities with certain physical effects (e.g. heat radiation or blast wave), and sometimes even cause so-called domino effect (accident escalation), which can subsequently extend the severity of the accident. One of the measures to reduce fire incidents and save peoples lives is by providing knowledge and developing good understanding of the behavior of fire and smoke, the behavior of people exposed to fire, developing a correct evacuation plan, as well as designing and maintaining facilities. Designing and selecting appropriate fire protection systems. This course will provide extensive information on the above, and will be delivered by the academic and industry experts in fire safety and protection engineering. This course is aimed to enhance studentsknowledge on the fundamental theory of fire explosion and fire hazard analysis. The course also covers topics on fire risk assessment and protection and prevention strategies. The installation, inspection, testing and maintenance of fire and explosion protections will also be discussed. Upon completion of this course, participants will be able to: Assess fire and explosion hazards Understand why process industries needs to implement fire and explosion prevention and protection systems Learn how your company would formulate fire and explosion protection systems Understand the skills required for leaders to handle fire and explosion incidents 1. Introduction to Fires & Explosion 2. Fire & Explosion Dynamics 3. Fire & Explosion Risk Assessment 4. Fire & Rescue Incident Command Leadership & Tactical 5. Fire Protection Strategies & Emergency Planning and Response 6. Passive Fire Protection 7. Active Fire Protection and Detection 8. Active Fire Protection Systems Reliability 9. Fire & Explosion Prevention Elements

Upload: others

Post on 30-May-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: QHSE Officers and Managers - CAPE UTPcape.utp.edu.my/.../uploads/2018/07/Brochure-Fire-Explosion-Safety-… · in fire safety, emergency response and planning, crisis management and

Fire is destructive and catastrophic in nature and it is a known fact that

fire occurrence is often unpredictable. Fire claims thousands of human

lives each year and injures more worldwide. Fire in petroleum facilities

especially can lead to significant losses including life, financial, property

and subsequently damaging the environment which will lead to

catastrophic consequences. These accidents not only destroy facilities,

but also may hit nearby facilities with certain physical effects (e.g. heat

radiation or blast wave), and sometimes even cause so-called domino

effect (accident escalation), which can subsequently extend the severity

of the accident. One of the measures to reduce fire incidents and save

people’s lives is by providing knowledge and developing good

understanding of the behavior of fire and smoke, the behavior of people

exposed to fire, developing a correct evacuation plan, as well as designing

and maintaining facilities. Designing and selecting appropriate fire

protection systems. This course will provide extensive information on the

above, and will be delivered by the academic and industry experts in fire

safety and protection engineering.

This course is aimed to enhance students’ knowledge on the fundamental

theory of fire explosion and fire hazard analysis. The course also covers

topics on fire risk assessment and protection and prevention strategies.

The installation, inspection, testing and maintenance of fire and

explosion protections will also be discussed.

Upon completion of this course, participants will be able to: Assess fire and explosion hazards Understand why process industries needs to

implement fire and explosion prevention and protection systems

Learn how your company would formulate fire and explosion protection systems

Understand the skills required for leaders to handle fire and explosion incidents

1. Introduction to Fires & Explosion 2. Fire & Explosion Dynamics 3. Fire & Explosion Risk Assessment 4. Fire & Rescue Incident Command Leadership &

Tactical 5. Fire Protection Strategies & Emergency Planning

and Response 6. Passive Fire Protection 7. Active Fire Protection and Detection 8. Active Fire Protection Systems Reliability 9. Fire & Explosion Prevention Elements

Page 2: QHSE Officers and Managers - CAPE UTPcape.utp.edu.my/.../uploads/2018/07/Brochure-Fire-Explosion-Safety-… · in fire safety, emergency response and planning, crisis management and

QHSE Officers and Managers Operations, Safety and Executive

Engineers - Process, Safety and Mechanical

PSM Implementation Team Members

Compliance Auditors Consultants, Lecturers and

Researchers HSE and Process Safety Senior

Technicians

AP. Dr. Mohammad Shakir Nasif, is an associate professor at Universiti Teknologi PETRONAS. With over 20

years of industrial and academic experience in the field of mechanical and fire engineering, he is adept and well

versed. He boasts an impressive track record working with international consultants in Australia, New Zealand, and

the Middle East – all focused on fire engineering & fire safety as well as protection engineering. Dr. Shakir is a well

acquainted conference speaker, and also acts as a research supervisor. He currently has seventy peer reviewed

journals, conference papers, and technical reports under his belt.

AP. Ir. Dr. Halim Shah Maulud, is an Associate Professor in the Chemical Engineering Department at Universiti

Teknologi PETRONAS. Prior to joining UTP, he also served various positions at PETRONAS making him a familiar face

in the oil and gas industry. Dr. Halim obtained his PhD in Process System Engineering from the University of Sydney,

Australia. At present, Dr. Halim is actively involved in research and industrial projects related to Process Modelling,

Design, Safety and Control.

AP. Dr. Masdi Muhammad acts as an associate professor in the Mechanical Engineering Department. He

currently leads the research cluster for the Facility and Plant Engineering department at Universiti Teknologi

PETRONAS. Dr. Masdi engages actively in areas revolving around Reliability, Risk and Maintenance through research

collaboration and consultancy with PETRONAS. On top of all that, Dr. Masdi is also an established member of BEM,

IEM, ASME and ASQ as well as being a chartered engineer.

Prof. Dr. Nasir Shafiq, is a professor in the department of civil engineering at University Technology PETRONAS.

An academician, researcher, and structural design consultant, he has accumulated over 25 years of experience to date.

His areas of specialty pertain to the analysis & design of oil & gas, buildings and infrastructures, reliability engineering,

fire resistant materials and low carbon design. Apart from having written over a hundred journal papers, conference

proceedings and reviews, he also authored a book on “Green and Sustainable Construction”. Dr. Nasir has worked in

technical projects from the oil and gas industry. He also served as vice president of the concrete society Malaysia

between 2014-2016. Dr. Nasir has joined the American concrete society (ACI) and associate member of committee 201 (under ACI) on

concrete durability.

Datuk Dr. Soh Chai Hock holds the position of Chairman of the Fire Prevention Council, Malaysia (FIPCOM), and

is a Fellow of the Institution of Fire Engineers. He also is the founding member and first President of the Institution of

Fire Engineers of the United Kingdom and Malaysia Branch. Formerly, Datuk Soh was the Director General of the

Malaysian Fire and Rescue Services, which was transformed into a Blue Chip Multiskill Organisation – comprising of

land, water and air response capabilities. He is an advisor and consultant to the International Public and Private

organization, with more than 50 years’ experience in Emergency Management. Furthermore, he is also a member of the United

Nations Fire Expert committee based in Geneva, Switzerland. Datuk Soh happens to be the Fire Defence Expert for the Asian

Productivity Organisation in Tokyo, Japan which consists of twenty Asia-Pacific countries. He acts as the National Chairman of the

Malaysian Fire Prevention Council and Advisor to the Asia Pre-Hospital Fire Rescue Federation, Bangkok. In addition, he also plays the

role of the independence Director of FITTERS Diversified Berhad, and former Director of HOPI-J Investment Management Co. Ltd,

China. This also applies to PROTON Automobile Sdn Bhd., Proton Edar Sdn. Bhd., ASIA Insurance (M) Bhd. and is the Executive

Chairman of Z'ODD Design Sdn Bhd.

Mr. Kairul Zaman Mohamed Noh holds a MSc. in Emergency Planning and Response. He has established 30

years of Fire Safety, Emergency Preparedness, and Crisis Management experience. At present, he is the Head of Crisis

Management, PETRONAS with 20 years’ experience in Upstream and Downstream oil & gas plants. Apart from being a

notable course speaker, Mr. Kairul was also the Senior Fire Officer of Fire & Rescue Department for twelve consecutive

years. His most recent position being the Deputy Director of Fire & Rescue, Negeri Sembilan. Mr. Kairul is well versed

in fire safety, emergency response and planning, crisis management and fire, along with explosion protection systems.

Tuan Nordisham Tuan Hussain is the fire chief for Central Emergency and Fire Service Response, PETRONAS,

at their Petrochemical Complex in Kerteh, Malaysia. Prior to that he was a fire officer at the fire prevention

department - Fire and Rescue Malaysia. Tuan Nordisham started his career in the fire service 2 years upon

graduation, where he was then trained professionally in Europe, the United States, and Japan as well as working

closely with counterparts in the Middle East. He has over 20 years’ experience in fire safety both in the government

sector as well as in oil and gas. This has given him extensive knowledge in emergency response and fire safety. He has

also given talks in various conferences and courses.

Mr. Ian Roy Holt is FIREMAC’s Research and Development Manager. He has earned 25 years of experience in fire

safety and protection engineering – including passive fire protection testing and Research and Development. Mr. Holt

is responsible for all of the Research and Development laboratories including those located in Europe and Asia. He

has developed full scale Research and Development facility for Fire testing in Latin America. Mr. Holt’s outstanding

expertise in fire Research and Development is internationally well recognized.

RM 3370 (Professionals) 10% Discount (UTP Alumni,

PETRONAS & Group Registration) 20% Discount (Student) Course fee is inclusive of 0% GST.

Group registration is applicable for 3 pax

and above from the same company.

The fees include refreshments and course

materials.

A certificate of attendance will be issued

upon successful completion of the course.

Course Coordinator: Mr. Fateh Hakeem

Tel: +605-368 7573 Email: [email protected]

Course Registration: Mr. Farhan Zulkefly Tel: +603-2276 0136 / +60143150602 Email: [email protected]

Email [email protected] to register by the 17th September 2018.

Seats are limited. A seat will be confirmed once the payment / LOU is

received. Confirmed participants will be informed via email.