QSYNC Software

QSYNC

Outlook Synchronization

Software for

ADVANTAGE 1.x

Manual

Template: TEMPMD01REV00

Document No. 1005DI03REV00 Version: 2013-06-28 Reservation: Technical Data is subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. All rights reserved. i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct or indirect damages caused by any improp-er use of this phone. (c) 2013 i.safe MOBILE GmbH i.safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen Germany Tel. +49 9343/60148-0 info@isafe-mobile.com www.isafe-mobile.com

Contents

3

Part I Installation 4 1 Download and preparation 5 2 Installation of the USB Driver 5 3 Installation of the QSYNC Software 7 4 How to use QSYNC TOOL 8

4.1 Set up the Connection 8 4.2 Main Menu 10 4.3 Synchronization 11

4

1 Installation

1.1 Introduction The QSYNC software is a windows tool to synchronize Outlook contacts with the mobile phone ADVANTAGE 1.x. The program is able to import contacts from VCF-files used by Lotus Notes and other programs. The software runs on Windows operating systems, only. The program can be downloaded at www.isafe-mobile.com.

5

1.2 Download and preparation The program can be downloaded as a ZIP-archive at www.isafe-mobile.com. After you have downloaded the file, please extract the contents of the ZIP-archive to a folder of your choice.

1.3 Installation of the USB Driver For the software to function, the corresponding USB driver for the ADVANTAGE 1.x needs to be installed first:

1. Navigate to the folder where you have extracted the ZIP-archive into.

2. Navigate to the folder Install_chose / USB_driver_W715.

3. Depending on your operating system, navigate to the folder Win32 or Win64.

4. Navigate to the folder corresponding to your operating sys-tem. NOTICE Windows 7 users please use the folder VISTA.

5. Navigate to the folder corresponding to the processor type used by your computer. Start the installation of the driver by running the file DPInst.exe. NOTICE If you are using Windows Vista or above, you need to start the file with administrative privileges. To do so, right-click on the file and choose Run as administrator from the context menu.

6

6. Follow the instructions of the installation wizard. If the instal-lation of the driver was successful, the following window will appear:

7. You can test the successful installation of the driver by con-necting the ADVANTAGE1.x to the PC and choosing PCsync on the screen of the phone to connect it with the PC. If you open the device manager of your PC, the following drivers should be active:

7

2 Installation of the QSYNC Software 1. Navigate to the folder where you have extracted the ZIP-

archive into.

2. Navigate to the folder Install_chose.

3. Depending on your operating system, navigate to the folder Win32 or Win64.

4. Start the installation by opening the file QSYNC.exe.

5. Follow the instructions of the installation wizard. If the instal-lation of the driver was successful, the following window will appear:

6. After a successful installation, the software can by started by double-clicking on the corresponding icon on your desktop.

8

3 How to use QSYNC TOOL

3.1 Set up the Connection Start the software with a double click on the QSYNC icon on your desktop. The following window shows up:

Next, please connect the ADVANTAGE1.x with the PC and select “PCsync” on the screen of the phone:

9

After a successful connection between phone and PC, the phone will show “synchronization with PC” is shown and the marker on the lower left corner of the window of QSYNC on the PC will change from disconnect (red) to connect (green).

NOTICE This process will take up to 30 seconds.

10

3.2 Main Menu To start the synchronization process, click on the arrow on the bottom of the window. This opens up the following menu:

You now have the following choices:

MainView This brings you back to the previous menu.

Settings Here you can change the language of QSYNC.

Phone Book Here you can start the synchronization.

11

3.3 Synchronization Open up the menu item Phone Book to show the following win-dow:

Sync Please click on this button first. In the now appearing pop-up window, you can choose whether to write contacts from the PC to the phone or the other way around. NOTICE QSYNC stores contacts in a separate database, so contacts from MS Outlook will not appear by themselves. You have to no import them first. WARNING If you choose sync PC to phone QSYNC writes its own data-base to the phone. Contacts on the phone that have not been synchronized with QSYNC will be lost!

12

Import This button is used to import contacts from MS Outlook or other programs. If you choose this option, a new pop-up win-dow appears. In this new window, you can choose whether to import contacts from MS Outlook directly or in Vcard (.VCF) format used by other programs. Click Import From Outlook, to open the following window:

Next, choose the folder where your MS Outlook contacts are stored (per default, this is the folder Contacts).Confirm your choice with OK to copy the contacts into the QSYNC database.

Now the contacts in the QSYNC database can be synchronized with the phone by clicking on Sync and choosing PC to phone.

13

Export This button is used to export the QSYNC database into a VCF-file for import into MS outlook and other programs.

New You can directly add a new contact to the QSYNC database by us-ing this option.

Delete Use this button to delete a contact from the QSYNC database.