quality agricultural equipment - agricultural innovations · quality agricultural equipment...

Quality Agricultural EquipmentManufacturers of:

V-Blades • Sweeps • Chisels & Spikes • Disc Blades • Drill Discs & Hoe Drill Points Related Tillage & Planting Hardware • Fertilizer Knives • Shanks • Coulter Blades • Crop Savers

Precision Planting Equipment • Conservation Ripper Points • Strip Till Points • Fertilizer Row Units

Distributors of:Belted Grain & Fertilizer Conveyors • Salt & Material Handling Conveyors • Seed Handling Equipment

Round Baler Belting • Milo Guards & Crop Savers

PresidentMike Bergmeier - Ext. 301Email: [email protected]

Vice PresidentAngie Bergmeier - Ext. 311Email: [email protected]

Territory SalesOklahoma/Southern Kansas/TexasBrad Gastineau - Ext. 316Cell: 620.200.0523Email: [email protected]

Colorado/Northern Kansas/NebraskaAndy Klamm - Ext. 305Cell: 620.720.8630Email: [email protected]

Inside Sales/ShippingPaul Ehler - Ext. 303Cell: 620.728.8617Email: [email protected]

Accounting/Parts DepartmentIris Devena - Ext. 308Email: [email protected]

Logan Hurlbut - Ext. 315Email: [email protected]

WarrantyAcra-Plant warrants our products to be free of defects in materials and workmanship for a period of 180 days afterthe date of end user (consumer) purchase from the dealer. The warranty for whole goods equipment shall be exactlythe warranty offered on these products by the original equipment manufacturer, and their individual warranties shallreplace this warranty. This warranty does not apply to item(s), equipment or component parts that are found to havebeen subject to abuse or inadequate maintenance, that have been altered in any way or that have been usedbeyond their advertised capacity, rating or intended use. This warranty shall be for the repair or replacement of thedefective item(s) at the sole discretion of Acra-Plant. Any warranty replacement or repairs shall be subject to pro-rated consumer usage deductions as outlined below. Any warranty on tillage items expires after 1/2˝ of edge wearhas occurred. Chrome products are warranted for defects in material and workmanship only, and the pro-rating sys-tem and 1/2˝ edge wear rule does not apply to chrome products. Chrome products are not guaranteed for use inrocky or frozen ground. This warranty does not extend to labor incurred in removal or replacement of any item(s).Acra-Plant shall not be liable for incidental or consequential damages arising out of the use or inability to use theitem(s) for any purpose whatsoever.

Execution of consumer rights for warranty repair or replacement:

1. Consumer must provide the dealer with evidence of date of purchase of the item(s) to be considered for warranty.This evidence shall be in the form of a copy of the invoice or bill of sale for the item(s) and this evidence shallaccompany the item(s) alleged to be defective.

2. The dealer shall provide Acra-Plant with #1, above, and with a copy of the Acra-Plant invoice to the dealer for thesame item(s).

3. The Acra-Plant Territory Manager or the dealer shall complete a Acra-Plant Returned Goods Authorization (RGA)for the item(s) alleged to be defective. It is the dealer’s responsibility to return the item(s) to Acra-Plant at the deal-er’s expense; however, the Territory Manager may elect to return the items(s) to Acra-Plant via our truck. Extensionof this courtesy does not constitute the final decision to authorize warranty replacement or repair for the item(s).

4. Upon receipt of the item(s) alleged to be defective and the RGA, the Acra-Plant engineering department willinspect the item(s). The engineering department will have sole discretion to authorize warranty replacement or repair.

5. Acra-Plant engineering department shall assign the pro-rated wear factors to all item(s) subject to a warranty claim.Since the range of item(s) varies widely, the assignment of pro-rated wear factor deductions shall be done in goodfaith, working with the Acra-Plant Territory Manager, the dealer and the consumer. In general, warranty will be pro-rated for wear up to 1/2˝ of edge wear on the item(s). Any warranty on tillage items expires after 1/2˝ of edge wearhas occurred. The pro-rating system and 1/2˝ edge wear rule does not apply to chrome products.

6. Acra-Plant will at its sole discretion replace or repair the item(s) found to be defective, less the pro-rated wear fac-tors. Acra-Plant will return the item(s) that have been repaired or replaced to the dealer including free return trans-portation via the mode of our choice.

Notes on Implied Warranties and LimitationsThere is no implied warranty of merchantability or fitness for a particular purpose. Some states do not allow limita-tions on implied warranties of merchantability or fitness for a particular purpose, so this limitation may not apply in agiven state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limi-tation may not apply in a given state. This warranty gives dealers and consumers specific rights. There may be otherrights that vary from state to state.

Table of Contents

Acra-Plant Quick Change Side-Mount Fertilizer Knives Section 1

Acra-Plant Quick Change Fertilizer Knives for Chisel Plow & Field Cultivator Applicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 2

Acra-Plant Hoe Drill Shoes & Hoe Drill Points for OEM Replacement Section 3Hoe Drill Shoes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Hoe Drill Replacement Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Chrome Carbide Ripper & Subsoiler Points Section 4 Conservation Ripper Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Chrome Carbide V-Crown Subsoiler & Ripper Points . . . . . . . . . . . . . . . . . . . . . . . . 4-4Shank Guards, Shin Guards & Ripper Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Acra-Plant V-Slice Inserts Section 5

Acra-Plant Cultivator Points & Sweeps Section 6

Acra-Plant Special Application Chrome Carbide Section 7OEM Replacement Pin-on Cultivator Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1Weld-on Cultivator, Sweep, Chisel Plow & Lister Points . . . . . . . . . . . . . . . . . . . . . . 7-1Rod Weeder Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3Pasture Renovator, Strip Till, Fertilizer & Chisel Plow Points . . . . . . . . . . . . . . . . . . . 7-3Chrome Carbide Harvest Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

ShieldAg Pry Bars Section 8

Casting Crossover Index Appendix

Ferti

lizer

Knive

sCh

isel/C

ultiv

ator

Knive

sHo

e Dril

lSu

bsoi

ler/

Ripp

erV-

Slic

e Ins

erts

Culti

vato

r Poi

nts/

Swee

psSp

ecia

lAp

plic

atio

nPr

y Bar

Appe

ndix

1-1

Acra-Plant Quick Change Side-Mount Fertilizer Knives

Features & Benefits• Acra-Plantreplaceablepointfertilizerknivesoutlast“throwaway”knives3–5times—reducingdowntimeandsavingmoneyinthelongrun

• ChromeCarbidePointsscourquicklytoahighpolish,slippingthroughthesoilandpullingeasierthan“throwaway”knives—you’llsavemorefertilizerwiththeuniqueself-sealingdesign

• Acra-TuffChromeCarbidealloypointcontinuestoperformlikenewthroughoutitslifewithnodegradationofperformanceafterjustafewhundredacres

• Acraknivesaredesignedforminimumsurfacedisturbance—perfectforyourNo-Tillcroppingplan• WithachoiceofthreeAcra-TuffChromeCarbidereplacementpointsandmanyNH3andliquidtubeoptions,youcantailoryourfertilizerrigtomatchyourconditionsandswitchveryeasilyifyourcroprotationornutrientplanchanges

Ferti

lizer

Kni

ves

MADE IN THE U.S.A.

Acra-Plant Quick ChangeSide-Mount Fertilizer Knives

Gas/liquidexpelpointislow,forward,andprotectedbytheChromeCarbidepointtominimizefreeze-up,pluggingandtubewear,evenindualapplication

High-strengthsteelshankispunchedtoacceptmostside-mountapplicators

Changeworninsertsinsecondswithspringpin

FourstylesofChromeCarbidereplacementpointsavailabletomatchyourgroundconditions

*For other fertilizer knives please call for your distributor

AP-700042-ST*Optional Point Available

1-2 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant Quick Change Side-Mount Fertilizer KnivesFe

rtiliz

er K

nive

s

Part# Description Weight

AP-700000 Assemblyincludes:AP-700010shankwith3/8˝NH3tube(.408˝OD,for3/8˝NH3hose)AP-700041standardpointw/AP-5106743/8˝x1-3/8˝springpin

8.89

AP-700200 Assemblyincludes:AP-700010shankwith3/8˝NH3tube(.408˝OD,for3/8˝NH3hose)AP-700043SuperWingpointw/AP-5106743/8˝x1-3/8˝springpin

8.0

AP-700400 Assemblyincludes:AP-700010shankwith3/8˝NH3tube(.408˝OD,for3/8˝NH3hose)AP-700044sealerpointwithAP-5106743/8˝x1-3/8˝springpin

8.0

AP-700043 SuperWingfertilizerpointwithAP-510674• 3/8̋x1-3/8̋springpin•Aggressivehardpanfracturingpoint

4.0

AP-700041 StandardfertilizerpointwithAP-510674• 3/8̋x1-3/8̋springpin•Self-sealingcharacteristicswithminimumsurfacedisturbance

4.29

AP-700042-ST SuperWingfertilizerpointwithAP-510674• 5.03/8̋x1-3/8̋springpin•Aggressivehardpanfracturingpoint

5.0

Kit# Description Weight

Starter Assemblies

AP-700044 CloserfertilizerpointwithAP-510674• 3/8˝x1-3/8˝springpin•Aggressivehardpanfracturingpointwithadded

• sealerwingforthetoughestsealingconditions

4.69

OrderONEPARTNUMBERtogetstartedwithAcra-PlantKnives:

AP-700010 Sidemountshankwith3/8̋NH3tube(.408̋OD,for3/8”NH3hose)•Othertubeoptionsavailable,seeoptionsandreplacementpartssections

4.60

AP-700000

1-3

Acra-Plant Quick Change Side-Mount Fertilizer Knives

Ferti

lizer

Kni

ves


AP-700010V Shankwith3/8˝NH3tubeand3/4˝vaportube 5.40

AP-700011 Bareshankwithoutanytubes 4.00AP-700011-XBR Bareshankwithoutanytubes 4.00AP-702000 Shankwith3/8˝NH3and3/8˝liquidtubes

(dualapplication)Fronttubeiscrimpedanddrilled,reartubeisopenendforliquid

0.50

AP-70200S Shankwith3/8˝NH3and3/8˝STAINLESSliquidtubes(dualapplication)Fronttubeiscrimpedanddrilled,reartubeisopenendforliquid

5.10

AP-702010 Shankwith3/8˝NH3and1/2liquidtubes(dualapplication)Fronttubeiscrimpedanddrilled,reartubeisopenendforliquid

5.40

AP-702110 Shankwith3/8˝NH3andclipringsfor1/2˝largeplastichose(dualapplication)Fronttubeiscrimpedanddrilledandclipringsareweldedon

4.80

AP-702510 Shankwithsingle1/2˝NH3tube(.569˝OD),crimpedanddrilled

4.70

AP-702610 Shankwithsingle1/2˝liquidtube(.569˝OD),openend

4.70

AP-700010 Shankwithsingle3/8˝NH3tubecrimpedanddrilled 4.60

Replacement Tubes & PartsPart# Description Weight

AP-700022 1/2˝Liquidtube(.569˝OD)openend 0.60

AP-700023 3/8˝NH3tube(.408˝OD)andclipringsfor1/2˝largeplastictube

0.60

AP-700025 1/2˝NH3tube(.569˝OD)crimpedanddrilled 0.60

AP-700021 3/8˝Liquidtube(.408˝OD)openend 0.50

AP-700020 3/8˝NH3tube(.408˝OD)crimpedanddrilled 0.50

AP-700041 Bareshankwithoutanytubes 4.29

AP-700044 CloserfertilizerpointwithAP5106743/8”x1-3/8”springpin

4.69

AP-700043 Bareshankwithoutanytubes 4.00

K2TBDA3/4 3/4”Vaportube(Raven) 0.75

AP-510674 3/8˝x1-3/8˝springpin 0.09

OPTIONS AVAILABLE to tailor your rig to your ground conditions andnutrient programs or BUILD YOUR OWN SYSTEM from the ground up:OptionalAcraknifeshanks(WITHOUTANYPOINT)

NOTE:Specialsandvaportubes(Raven)availableonrequest

MADE IN THE U.S.A.

1-4 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant Solid Chrome Liquid Coulter Side-MountsFe

rtiliz

er K

nive

s

MADE IN THE U.S.A.

Additional Solid Chrome Carbide Coulter InjectionPart# Description WeightK-5SB5SST ThinBoronknifeforAgSystems(andothers)

•CoulterInjectionSystemcomeswithUHMWcush-ionstominimizeimpactdamage

• 5/16”ThickBoronSteelLiquidKnifewithSurta-Shield®

5.50

K-7S ChromeknifeforAgSystems(andothers)•Noweld-onfertilizersteeltube,toreduceimpactbreakage

•Customerjustinserts3/8”liquidhoseintoself-grippingdeepholecastintoknifeandtiesitoffwithbandclamporziptie

4.35

K-8S ChromeknifeforAgSystems(andothers)•Noweld-onfertilizersteeltube,toreduceimpactbreakage

•Customerjustinserts3/8”liquidhoseintoself-grippingdeepholecastintoknifeandtiesitoffwithbandclamporziptie

4.35

2-1

54

3

21

7

6

Acra-Plant Quick Change Fertilizer Knives for Chisel Plow Applications

Features & Benefits• Long-lastingAcra-TuffAlloyreplaceablepointsoutwear˝throwaway˝chiselknives3–5times• Acra-Tuffcontinuestoperformlikenewthroughoutitslife,nodegradationofperformanceafterjustafewhundredacres

• ConvertfromfertilizerplacementtostandardchiselinjustafewminutesbyreplacingtheAP-708041fertilizerpointwiththeAP-705141chiselplowpoint

• AP-708041fertilizerpointprotectsyourfertilizertubefromplugging,wearandfreeze-up• ubeoptionsavailablefornearlyanyNH3orliquidapplication• SetuptoacceptAcra-PlantAirSeederassemblyAP-718500formaximumversatilitywithyourchiselplowimplement

Chise

l/Cul

tivat

orKn

ives

Acra-Plant Quick Change Fertilizer Knives For Chisel Plow Applicators

MADE IN THE U.S.A.


AP-705141 Acra-TuffchromealloychiselplowpointIncludesAP-5006571/2˝x1-1/4˝spirolpin

4.80

AP-705011 CastSteelShanks 4.30

AP-708003 Adjustingwedgetochangeshankangle 0.50

AP-705042 Acra-TuffchromealloychiselplowpointIncludesAP-5006571/2˝x1-1/4˝spirolpin

4.71

AP-708041 Acra-TuffchromealloyfertilizerpointIncludesAP-5006571/2˝x1-1/4˝spirolpin

2.79

AP-705029 TubemountingbracketkitIncludes:1eaAP-705025bracket1eaAP-5005361/4˝U-bolt2eaAP-5005801/4LockNut

0.50

AP-705021 3/8˝Liquidtube(.408˝OD),openend 0.32

1

4

5

6

7

3

2

2-2 1-800-798-1968 • WWW.SHIELDAG.COM

Ch

isel/C

ultiv

ator

Knive

s

MADE IN THE U.S.A.

AP-708041

AP-705141

AP-705042

Lefttoright:AP-705027,AP-705021,AP-705023,AP-705024

AP-705029

AP-705000Assembly

Starter AssemblyGetstartedusingyourchiselplowforfertilizerapplication

Part# Description WeightAP-705000 Completeshankwithpoint,includes:

• 1eaAP-705011HTSteelshank• 1eaAP-708041Fertilizerpointwithpin• 1eaAP-708003Adjustingwedge

7.50

ORDER 1ea AP-705029 Tube Mounting Bracket Kit PER KNI AP-705029 Tubemountingbracketkit0.50

• Includes:1eaAP-705025bracket• 1eaAP-5005361/4˝U-bolt• 2eaAP-5005801/4˝LockNut

6.50

Replacement TubesPart# Description WeightAP-705020 3/8˝NH3tube(.408˝OD),crimpedand

drilled0.32

AP-705021 3/8˝Liquidtube(.408˝OD),openend 0.32AP-705022 1/2˝Liquidtube(.569˝OD),openend 0.34AP-705023 3/8˝NH3andclipringsfor1/2˝largeplastic

hose(dualapplication)Tubeiscrimpedanddrilledandclipringsvareweldedon

0.46

AP-705024 1/2˝NH3tube(.569˝OD)crimpedanddrilled 0.34AP-705027 3/8”NH3tube(.408”OD),crimpedand

drilledwith3/4”Vaportubeweldedon0.79

Replacement PointsPart# Description WeightAP-708041 Acra-Tuffchromealloyfertilizerpoint2.19

IncludesAP-5006571/2˝x1-1/4˝spirolpin2.19

AP-705042 Acra-TuffchromealloyfertilizerpointIncludesAP-5006571/2˝x1-1/4˝spirolpin

4.71

AP-705141 Acra-Tuffchromealloychiselplowpoint4.80IncludesAP-5006571/2˝x1-1/4˝spirolpin

4.80

Acra Plant Field Cultivator Applicator System

2-32011 Acra-Plant Chrome Catalog

Features & Benefits• Long-lasting Acra-Tuff Alloy replaceable points outwear “throwaway” points 3–5 times• Acra-Tuff continues to perform like new throughout its life, no degradation of performance after just a few

hundred acres• AP-710080 fertilizer point protects your fertilizer tube from plugging, wear and freeze-up• Tube options available for nearly any NH3 or liquid application• May be used without tubes for standard cultivator work

Made in the USA

Part # Description WeightAP-710080 Acra-Tuff chrome alloy Z8 fertilizer point 1.15

Includes AP-510693 5/16˝ x 1˝ spring pinAP-707611 Ductile iron field cultivator shank 3.75AP-705029 Tube mounting bracket kit shin guard 0.50

Includes: 1ea AP-705025 bracket1ea AP-500536 1/4˝ U-bolt2ea AP-500580 1/4˝ Lock Nut

AP-705023 3/8˝ NH3 and clip rings for 1/2˝ large plastic hose 0.46(dual application)Tube is crimped and drilled and clip rings are welded on

NOTE: SEE REPLACEMENT TUBES & PARTS for all of the TUBE OPTIONS

Chise

l/Cul

tivat

orKn

ives

Acra-Plant Knives & Parts are made in the USA2-4 1-800-798-1968 • www.acraplant.com

Acra-Plant Quick Change Fertilizer Knife for Field Cultivator ApplicationOrder these Part Numbers for First Time UsePart # Description Weight1 each AP-707611 Ductile iron field cultivator shank 3.75

1 each AP-710080 Acra-Tuff chrome alloy Z8 fertilizer point 1.15Includes AP-510693 5/16˝ x 1˝ spring pin

1 each AP-705029 Tube mounting bracket kit 0.50Includes: 1ea AP-705025 bracket

1ea AP-500536 1/4˝ U-bolt2ea AP-500580 1/4˝ Lock Nut

ADD the Fertilizer Tube of your choice:Select the Replacement Fertilizer Tube(s) you need from the following:

Part # Description Weight

AP-705020 3/8˝ NH3 tube (.408˝ OD), crimped and drilled 0.32

AP-705027 3/8” NH3 tube (.408” OD), crimped and drilled with 3 / 4 ” Vapor tube welded on

0.79

AP-705021 3/8˝ Liquid tube (.408˝ OD), open end 0.32

AP-705022 1/2˝ Liquid tube (.569˝ OD), open end 0.34

AP-705023 3/8˝ NH3 and clip rings for 1/2˝ large plastic hose 0.46(dual application)Tube is crimped and drilled and clip rings are welded on

AP-705024 1/2˝ NH3 tube (.569˝ OD) crimped and drilled 0.34

Chisel/CultivatorKnives

Left to right: AP-705027, AP-705021, AP-705023, AP-705024

2011 Acra-Plant Chrome Catalog

Retool Your Existing Hoe Drill with Acra-Plant to Improve Performance in Difficult Soil, Moisture

& Residue Conditions

3-1

• Unique trash liftersallow for easier less-till planting• Stainless steelbodies self scour to pull easier without plowing• Acra-Tuff Chrome Carbide Points take the hardest ground

Save on seed — Go deep to find moisture and protect young plants from high windswithout plowing the soil or rakingyour old stubble — plant in the heaviest of residues — Use Acra V-Slice technology to put the seed where it belongsthis year. With Acra-Plant Hoe Drill Shoes, you can select from up to 5 different points to tailor your Hoe Drillfor your ground and residue conditions.

Acra-Plant Shoe withDSZ Point Assembly

Model # Part # Weight

John Deere LZ, 9300, 775–785 air hoe drills AP-711070 4.08(comes with AP-710070 (DSZ7) point installed)John Deere 9400, 1800-Series air hoe seeder AP-719480 5.00(comes with AP-710080 (DSZ8) point installed)

Crustbuster Hoe Drillswith Trash Shank775-785

Air HoeSeeders

1800-SeriesAir HoeSeeders

AP-711070John Deere LZ, 9300

AP-719480John Deere 9400

Crustbuster hoe drills with trash shank AP-714070 4.08(comes with AP-710070 (DSZ7) point installed)CaseIH 150 hoe drills with cast boot AP-715070 3.50(comes with AP-710070 (DSZ7) point installed)CaseIH 150, 7000-7100-7200 hoe drills AP-715570 3.33with Fab Boot & 8500 air hoe drill(comes with AP-710070 (DSZ7) point installed)NOTE: Acra-Plant hoe drill shoes also available for Versatile/Noble drills. Consult factory for details. Installation hardware purchased separately.

AP-715070CaseIH 150 w/Cast Boot

AP-715570CaseIH

150 with Fab Boot

Made in the USA

Hoe D

rill

Acra-Plant Hoe Drill Shoes & Hoe Drill Points for OEM Replacement

AP-714070

3-2 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant Hoe Drill Shoes & Hoe Drill Points for OEM ReplacementHo

e Dril

l

MADE IN THE U.S.A.

AP-711070

John Deere LZ 9300, 775-785 Air Hoe Drills Kit# Description WeightAP-711070 AssemblyIncludes 4.08

AP-711052 Acra-Plantstainlesssteeldrillshoebodyweldment 3.05

AP-710070 Acra-TuffchromecarbideV-slicepoint(DSZ7)withpin

1.03

Parts Required for First TimeInstallation on John Deere Drills Part# Description AP-711045 Installation HardwareAP-500044 SeedBaffle 1ea 3/8x21/2 CarriageBolt 1ea5/16X1 HexHeadBolt 1ea 3/8 TopLockNut 1ea5/16 HexJamNut 1ea 5/16x21/2 CarriageBolt 1ea

5/16 TopLockNut 1ea

JD LZ/9300 Installation Sheet will be sent with each order for AP-711070

Optional Points & Hardware Part# Description WeightAP-710060 (DSZ6)bolt-onV-bottomlow

disturbancepointw/hardware0.78

AP-710070 (DSZ7)bolt-onV-bottomlowdisturbancepointw/hardware

1.03

AP-729390 Z9bolt-onflatbottom,drop-nosepointwithout hardware

0.85

AP-729400 Bolt-on-heavy-dutyshallowV,dropnosepointwithout hardware

0.90

DNC-715V Economybolt-onshallowV,dropnosepointwithout hardware

0.70

AP-510693 5/16˝x1˝springpin(comeswithAP-710070)N1 1/4˝squarenut,requiredforbolt-onpointsZ1-1 1/4˝x1˝machinescrewslottedflathead,

requiredforbolt-onpoints1-1 Boxof100ea1/4˝x1˝machinescrewand

100ea1/4˝squarenut

With Acra-Plant Hoe Drill Shoes, you can select from up to five differentpoints to tailor your Hoe Drill for your ground and residue conditions�

Hard Ground • Heavy Residue • Tough Planting ConditionsDry Climate • Wet Planting Time

Tailor your Hoe Drill with Acra-Plant for Optimum Performance

3-3

Acra Plant Hoe Drill Shoes

Hoe D

rill

MADE IN THE U.S.A.

John Deere 9400, 1800-Series Air Hoe SeederAP-719480 Assembly with AP-710080 (DSZ8) Point Kit# Description WeightAP-719480 AssemblyIncludes 5.0

AP-719452 Acra-Plantstainlesssteeldrillshoebodyweldment

3.8


1.20

AP-719670 ModifiedAP-719452toaceptAP-710060orAP-710070

Parts Required for First TimeInstallation on John Deere Drills Part# Description AP-711045 Installation HardwareAP-719421 SeedBaffle 1ea 3/8x21/2 CarriageBolt 1ea5/16X1 HexHeadBolt 1ea 3/8 TopLockNut 1ea5/16 HexJamNut 1ea 5/16x21/2 CarriageBolt 1ea

5/16 TopLockNut 1eaJD LZ/9300 Installation Sheet will be sent with each order for AP-711070

Replacement Point & HardwarePart# Description WeightAP-710080 (DSZ8)pin-onheavy-dutyV-slicepointwithpin 1.20AP-510693 5/16˝x1˝springpin(comeswithAP-710080)

NOTE: The AP-719480 Acra-Plant Hoe Drill Shoe was designed EXCLUSIVELY for the John Deere 9400-series Hoe Drills and the 1800-Series Air Hoe Seeder. Opti-mum performance can only be guaranteed using the EXCLUSIVE AP-710080 (DSZ8) Heavy-Duty V-slice point.

Optimize your John Deere Hoe Drill withACRA-Plant Stainless Steel Hoe Drill Shoes

AP-719480

3-4 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant Hoe Drill Shoes & Hoe Drill Points for OEM ReplacementHo

e Dril

l

MADE IN THE U.S.A.

AP-714070

Crustbuster Hoe Drills Equipped with Trash ShanksConversion For Crustbuster to Acra Plant Opener; AP-714070 Assembly with AP-710070 Kit# Description WeightAP-711070 AssemblyIncludes 4.08

AP-711052 Acra-Plantstainlesssteeldrillshoebodyweldment 3.05


1.03

Hardware Installation KitKit# Description QuantityAP-714071 3/8”x2-1/2”carriagebolt 2

3/8”toplocknut 2CrustbusterInstallationSheetwillbesentwitheachorderforAP-71407

Optional Points & Hardware for Acra Plant Drill Shoe Kit# Description WeightAP-710060 (DSZ6)bolt-onV-bottomlow

disturbancepointw/hardware0.78

AP-710070 (DSZ7)pin-onheavy-dutyV-slicepointwithpin 1.03AP-729390 Z9bolt-onflatbottom,drop-nosepoint

without hardware0.85

AP-729400 Bolt-on-heavy-dutyshallowV,dropnosepointwithout hardware

0.90

DNC-715V Economybolt-onshallowV,dropnosepointwithout hardware

0.70

AP-510693 5/16˝x1˝springpin(comeswithAP-710070)N1 1/4˝squarenut,requiredforbolt-onpointsZ1-1 1/4˝x1˝machinescrewslottedflathead,

requiredforbolt-onpoints1-1 Boxof100ea1/4˝x1˝machinescrewand

100ea1/4˝squarenut

Equip your Crustbuster Hoe Drill with ACRA-Plant Shoes for HIGH PERFORMANCE Less-Till drilling


Acra-Plant Hoe Drill Shoes

CaseIH 150 Hoe Drills with Cast Shank BootsAP-715070 Assembly with AP-710070 (DSZ7) PointKit # Description WeightAP-715070 Assembly includes: 3.50

AP-715052 Acra-Plant stainless steel drill shoe body weldment

AP-710070 Acra-Tuff chrome carbide V-slice point (DSZ7) with pin

2.47

1.03

Parts Required for First Timeinstallation on CaseIH DrillsPart # Description Quantity Weight

Hoe D

rill

Made in the USA

Quantity Description

2 3/8˝ x 3/4˝ Carriage Bolt2 3/8˝ Top Lock Nut

AP-715071 Hardware Installation Kit

AP-715021 Seed baffle 1 0.20

CaseIH 150 Cast Boot Installation Sheet will be sent with each order for AP-715070

Optional Points & Hardware Part # Description WeightAP-710060 (DSZ6) bolt-on V-bottom low disturbance point 0.78

with hardwareAP-710070 (DSZ7) pin-on heavy-duty V-slice point with pin 1.03AP-729390 Z9 bolt-on flat bottom, drop-nose point 0.85

AP-729400 Bolt-on heavy-duty shallow V, drop nose point 0.90

DNC-715V Economy bolt-on shallow V, drop nose point 0.70without hardware

without hardware

without hardwareAP-510693 5/16˝ x 1˝ spring pin (comes with AP-710070)N1 1/4˝ square nut, required for bolt-on pointsZ1-1 1/4˝ x 1˝ machine screw slotted flat head,

required for bolt-on points1-1 Box of 100ea 1/4˝ x 1˝ machine screw

& 100ea 1/4˝ square nut

With Acra-Plant Hoe Drill Shoes,you can select from up to five different points to tailor your Case IH Hoe Drill for your ground and residue conditions

Hard Ground • Heavy Residue • Tough Planting Conditions Dry Climate • Wet Planting Time

Acra-Plant will Tailor your Hoe Drill for Optimum Performance

AP-715070

3-5

Acra-Plant Hoe Drill Shoes

CaseIH 150 Hoe Drills with Fab Shanks &7000-7100-7200 Hoe Drills with Fab Shank Boot & 8500 Air Hoe DrillAP-715570 Assembly with AP-710070 (DSZ7) Point Kit # Description WeightAP-715570 Assembly includes: 3.33

AP-715552 Acra-Plant stainless steel drill shoe body weldment

AP-710070 Acra-Tuff chrome carbide V-slice point (DSZ7) with pin

2.30

1.03

Optional Parts for First Timeinstallation on CaseIH Hoe Drills with Fab BootsConsult Acra Plant Factory Engineering for side plates and seed tubeoptions that may be required for FIRST TIME application:Part # Description

23/8˝ x 1˝ hex head cap screw23/8˝ top lock hex nut

AP-715523Optional Seed Tube

Short seed tube 1

AP-715053Installation Hardware

CaseIH 150 Fab Boot Installation Sheet will be sent with each order for AP-715570

Optional Points & Hardware Part # Description WeightAP-710060 (DSZ6) bolt-on V-bottom low disturbance point 0.78

with hardwareAP-710070 (DSZ7) pin-on heavy-duty V-slice point with pin 1.03AP-729390 Z9 bolt-on flat bottom, drop-nose point 0.85

AP-729400 Bolt-on heavy-duty shallow V, drop nose point 0.90

DNC-715V Economy bolt-on shallow V, drop nose point 0.70without hardware

without hardware

without hardware

AP-510693 5/16˝ x 1˝ spring pin (comes with AP-710070)N1 1/4˝ square nut, required for bolt-on pointsZ1-1 1/4˝ x 1˝ machine screw slotted flat head,



CaseIH Hoe Drills & Minimum-Till Drilling?Do it thisyearwith ACRA-Plant

AP-715570

3-6 1-800-798-1968 • www.acraplant.com

Hoe Drill

Made in the USA

Quantity

3-7

Hoe Drill Replacement Points

Hoe D

rill

MADE IN THE U.S.A.

Hoe Drill Replacement PointsChromeCarbideDrillPointsforAcra-PlantMin-TillHoeDrillShoesandQualityChromeCarbideDrillPointstoimprovetheperformanceofyourstandardhoedrill:• ACRA-Tuff Chrome Carbide Points takethehardestground• Chrome Carbide will outlast OEM cast points 3-5 times• ManypointsavailableinV-bottomconfiguration,forimprovedseed-soilcontact• Widest variety of Chrome Carbide Points totailoryourhoedrillforyourgroundandresidueconditionsandforyourever-changingcroprotations

PartNumbersinboldarethePartNumbersyouorderfromAcra-Plant/ShieldAgPartNumbersinparentheses()arecommonnumbersthathavebeenusedbytheindustrytoidentifytheseparts

See castings Cross Reference Index on pages i,ii, iii

AP-710060(DSZ6)(Z6)

(AG-7100-60)(TF111)

(DNC-829)

AP-710070(DSZ7)(Z7)

(DNC-827P)

AP-710080(DSZ8)(Z8)

AP-729390(Z9)

(TF132)

AP-729400(99)

DNC-715V(715V)

AP-729410(Z10)(TF105)(657PO)

DNC-657D(657)

DNC-657V(657V)

DNC-657DEB(657DEB)

AP-720011X(720011)(809i)

AP-720011XV(809V)



AP-729390 (Z9, TF132) Bolt-on flat bottom point, without hardware 0.85This point is designed with a “drop nose” tip for any Z6 or Z7 application where the V-bottom is not desired due to ground or soil conditions

AP-729400 Bolt-on V-bottom point with “drop nose,” without hardware 0.90This point is designed with a “drop nose” tip for any Z6 or Z7 application where the V-bottom is desired with a drop point

DNC-715V (715V) Bolt-on “economy” V-bottom point, without hardware 0.70This point is a light-weight, less aggressive V-bottom point with a small “drop point” designed for lighter soil applications

HardwarePart # DescriptionAP-510693 5/16˝ x 1˝ spring pin (comes with AP-710070)

DK-5 Boot Because of casting tolerance, sides of boot may have to be ground slightly to allow installation of point

Noble DK-5 2˝ shank

AP-710070

Versatile 2000-2200 Series (DSZ8, Z8)

AP-710060(DSZ6, Z6)

AP-729400AP-729390

Points Available for Acra-Plant Min-Till Hoe Drill ShoesNOTE: These points are designed for drills that have been converted to Acra-Plant Shoes

EconomyModel # Bolt-On V-Bottom Pin-On V-Bottom Bolt-On Flat Bottom Bolt-On Shallow V Bolt-On Shallow V

PartsPart # Description WeightAP-710060 (DSZ6, Z6) Bolt-on V-bottom point, includes hardware 0.78

This point is a light-weight, less aggressive Acra-Plant V-bottom point without “drop point” designed for lighter soil applications

AP-710070 (DSZ7, Z7) Pin-on V-bottom point with 5/16˝ x 1˝ spring pin 1.03This point is a heavy-duty aggressive Acra-Plant V-bottom point designed for optimum seed-to-soil contact in the toughest planting conditions

AP-710080 (DSZ8, Z8) Pin-on V-bottom point with 5/16˝ x 1˝ spring pin 1.20This point is a heavy-duty aggressive Acra-Plant V-bottom point designed for optimum seed-to-soil contact in the toughest planting conditions

John Deere AP-710060 AP-710070 AP-729390 AP-729400 DNC-715VLZ, 9300 (DSZ6, Z6) (DSZ7, Z7) (Z9) (715V)John Deere AP-710080

,8ZSD( 0049 Z8)CaseIH AP-710060 AP-710070 AP-729390 AP-729400 DNC-715V

)V517()9Z()7Z ,7ZSD()6Z ,6ZSD(knahS baFCaseIH AP-710060 AP-710070 AP-729390 AP-729400 DNC-715V

)V517()9Z()7Z ,7ZSD()6Z ,6ZSD(knahS tsaCCrustBuster AP-710060 AP-710070 AP-729390 AP-729400 DNC-715V

)V517()9Z()7Z ,7ZSD()6Z ,6ZSD(sknahS hsarT htiwMeloroe/Lilliston/ AP-710060 AP-710070 AP-729390 AP-729400 DNC-715VKirshman/ Massey (DSZ6, Z6) (DSZ7, Z7) (Z9) (715V)

,775-785

, 1800

N1 1/4˝ square nut, required for bolt-on pointsZ1-1 1/4˝ x 1˝ machine screw slotted flat head,



Hoe Drill


Hoe Drill Replacement PointsPoints Available for John Deere OEM Hoe Drill Shoes

Standard Bolt-On Drop Nose Spear PointModel # Spear Point Pin-On Flat BottomJohn Deere LZ DNC-657DJohn Deere 9300, (Z10) (657DEB)9400 with factory (TF105)AN213462 boot & (657PO)

air hoe seeders

NOTE: John Deere OEM Boot Part Number AN213462 is now the only factory OEM boot available from John Deere for LZ, 9300and 9400-series Hoe Drills. The above list of points are designed to yield the widest variety of Spear Points and V-bottom Points available today for all John Deere Hoe Drills and air hoe seeders using hoe drill boots.

PartsPart # Description Weight

DNC-657D (657) John Deere bolt-on spear point without hardware 0.75The Spear Point is designed to replace the standard JD Spear Point and is a direct replacement for original LZ shoes

AP-729410 (657PO, TF105, Z10) pin-on flat bottom point without hardware 0.82This point is designed with a “drop nose” tip for harder ground conditions and is a direct replacement for original LZ shoes

DNC-657DEB (657DEB) “Drop-nose” bolt-on spear point without hardware 0.78This drop nose spear point is designed to replace the standard JD spear point in applications where customers require a shorter point while retaining the “drop point” design. Normally, all points must be replaced to use DNC-657DEB due to the shorter point design.

DNC-657V (657V) Extended nose V-bottom bolt-on point 0.86This V-bottom Spear Point is designed to replace the standard JD Spear Point where a V-bottom design is required

without hardware

HardwarePart # DescriptionN1 1/4˝ square nut, required for bolt-on pointsZ1-1 1/4˝ x 1˝ machine screw slotted flat head, required for bolt-on points 1-1 Box of 100ea 1/4˝ x 1˝ machine screw and 100ea 1/4˝ square nut

Made in the USA

Hoe D

rill

(657)

Drop NoseBolt-On Flat Bottom Bolt-On V-Bottom

AP-729410 DNC-657DEB DNC-657V(657V)

DNC-657D

AP-729410

DNC-657DEB

DNC-657V

3-10 1-800-798-1968 • WWW.SHIELDAG.COM

Hoe Drill Replacement PointsHo

e Dril

l

MADE IN THE U.S.A.

Points Available for CaseIH/International OEM Hoe Drill Shoes Model# Extreme Condition Bolt On Point Bolt-On V-BottomCaseIH/International AP-720011X

(720011)(809i)

AP-720011XV

PartsPart# Description WeightAP-720011X (Z11X)Z11extremeconditionsbolt-onpoint,withouthardware

ThispointfeaturesamoreradicalnosedropandatallerV-crowntolastlongerindry,hardconditions

0.90

AP-720011XV Bolt-onV-bottompoint,withouthardwareThispointisaV-bottomversionofthestandeardZ11

1.04

HardwareKit# DescriptionN1 1/4”squarenut,requiredforbolt-onpointsZ1-3 1/4”X1-1/2”machinescrewslottedflathead,requiredforbolt-onpoints


Hoe Drill Replacement PointsPoints Available for Crustbuster OEM Hoe Drill Shoes

Economy Drop NoseModel # Bolt-On Point Bolt-On V-BottomCrustbuster AP-729390 AP-729400

PartsPart # Description WeightAP-729390 (Z9, TF132) Bolt-on flat bottom point, without hardware 0.85

This point is designed with a “drop nose” tip

AP-729400 Bolt-on V-bottom point with “drop nose”, without hardware 0.90This point is designed with a “drop nose” tip for any Z6 or Z7application where the V-bottom is desired with a drop point

HardwarePart # DescriptionN1 1/4˝ square nut, required for bolt-on pointZ1-1 1/4˝ x 1˝ machine screw slotted flat head, required for bolt-on points 1-1 Box of 100ea 1/4˝ x 1˝ machine screw and 100ea 1/4˝ square nut

Optional Points for Early Crustbuster Hoe Drills with 3/8˝ shankand bolt-on point or pin-on optionsPart # Description WeightAP-710060 (DSZ6, Z6) Bolt-on V-bottom point with hardware 0.78AP-710070 (DSZ7, Z7) Pin-on V-bottom point with 5/16˝ x 1˝ spring pin 1.03

Hoe D

rill

(Z9, TF132)



Points Available for Great Plains, My-D Han-D & Morris OEM Hoe Drill Shoes

Standard Drop-Nose Bolt-OnModel # Bolt-On Point Bolt-On V-Bottom

Great Plains,My-D Han-D

AP-729390060017-PA

Morris 013HM- Morris Edge on Shank

AP-729390 AP-710060

Pin On V-Bottom

AP-710080

PartsPart # Description Weight

AP-729390 (Z9, TF132) Bolt-on flat bottom point, without hardware 0.85This point is designed with a “drop nose” tip

AP-729400 Bolt-on V-bottom point with “drop nose”, without hardware 0.90

HardwarePart # DescriptionN1 1/4˝ square nut, required for bolt-on pointsZ1-1 1/4˝ x 1˝ machine screw slotted flat head, required for bolt-on points 1-1 Box of 100ea 1/4˝ x 1˝ machine screw and 100ea 1/4˝ square nut

Optional Points for Early Great Plains Hoe DrillsPart # Description WeightAP-729400 1.03DNC-715V (715V) Bolt-on “economy” V-bottom point without hardware 0.70

NOTES: AP-710080 (DSZ8) only for drills with 1/2˝ shank option No roll pin for Great Plains drill point

WARNING NOTE: Check your application carefully before ordering. A trial fit may be needed to assure the correct fit with all points listed above

Hoe Drill

(Z9, TF132)

V-BottomAP-729400

AP-729400

collinshores

Typewritten Text


Hoe Drill Replacement PointsPoints Available for Versatile & Versatile/Noble Hoe Drills

Standard Bolt-On Drop Nose Spear PointModel # Spear Point Pin-On Flat BottomVersatile DNC-657D2000-2200 (Z10) (657DEB)

(TF105)(657PO)

PartsPart # Description WeightDNC-657D (657) Bolt-on spear point, without hardware 0.75

AP-729410 (657PO, TF105, Z10) Pin-on flat bottom point, without hardware 0.82

DNC-657DEB (657DEB) “Drop-nose point” bolt-on spear point, without hardware 0.78

DNC-657V (657V) Extended nose V-bottom bolt-on point, without hardware 0.86

HardwarePart # DescriptionN1 1/4˝ square nut, required for bolt-on points per 500Z1-1 1/4˝ x 1˝ machine screw slotted flat head, required for bolt-on points per 5001-1 Box of 100ea 1/4˝ x 1˝ machine screw and 100ea 1/4˝ square nut per 100

tooF "2/1 , eohS tnalP-arcA htiw seireS 0022-0002 elitasreV rof tnioPPart # Description Weight

AP-710080 (DSZ8, Z8) Pin-on V-bottom point with pin 1.20

NOTE: Acra-Plant hoe drill shoes also available for Versatile/Noble drills. Consult factory for details.

Point for very early 2000-series Versatile, 3/8" FootPart # Description Weight

AP-710060 (DSZ6, Z6) Bolt-on V-bottom point with hardware 0.78

AP-710070 (DSZ7, Z7) Pin-on V-bottom point with pin 1.03

WARNING NOTE: Check your application for Versatile & Versatile/Noble hoe drills carefully beforeordering. A trial fit may be needed to assure the correct fit with all points listed above

Hoe D

rill

Acra Style Boot(3/8"-1/2" Foot)

Drop Nose

AP-729410Bolt-On Flat BottomDNC-657DEB

(657V)DNC-657VBolt-On V-Bottom

(657)

DNC-657D

AP-729410

DNC-657DEB

DNC-657V

AP-710080

AP-710060

AP-710070

3-14 1-800-798-1968 • WWW.SHIELDAG.COM

Hoe D

rill

Chrome Carbide Hoe Drill PointsPart# Description WeightAP-710060 (DSZ6, Z6) bolt-on V-Bottom, with hardware 0.78

AP-710070 (DSZ6, Z6) pin-on V-slice, with pin 1.03

AP-710080 (DSZ6, Z6) pin-on V-slice, point with pin 1.20

AP-720011X (Z11X) bolt-on extreme conditions, without hardware 0.90

AP-720011XV (Z11X) bolt-on extreme conditions, without hardware 1.04

AP-729390 (Z9, TF132) bolt-on drop-nose without hardware 0.85

AP-729400 Bolt-on V-bottom, drop-nose without hardware 0.90

AP-729410 (Z10, 657PO, TF105) pin-on without hardware 0.82


AP-710060

AP-710070

AP-710080

AP-720011X

AP-720011XV

AP-729390

AP-729400

AP-729410

3-15

Hoe D

rill


DNC-657D

DNC-657DEB

DNC-657V

DNC-715V

Chrome Carbide Hoe Drill PointsPart# Description WeightDNC-657D (657)bolt-onspear,withouthardware 0.75

DNC-657DEB (657DEB)dropnosebolt-on,withouthardware 0.78

DNC-657V (657V)V-bottombolt-onSpear,withouthardware 0.86

DNC-715V (715V)economybolt-onshallowV,withouthardware 0.70

AP-720011XV AP-720011XVbolt-onV-bottompoint,withouthardware 1.04

HardwarePart# Description WeightAP-510693 5/16”X1”Springpin

N1 1/4”squarenut,requiredforbolt-onpoints

Z1-1 1/4”x1”machinescrewslottedflathead,requiredforbolt-onpoints

Z1-3 1/4”x1-1/2”Machinescrewslottedflathead

1-1 Boxof100ea1/4”x1”machinescrewand100ea1/4”squarenut

AP-720011XV

MADE IN THE U.S.A.

Acra-Plant/ShieldAg offers a full line of Chrome Carbide ripper and subsoiler points designed to handle tough,dry and hard ground conditions. We manufacture and stock points, shank guards, ripper caps and edgeprotectors for just about every make and model of subsoiler and disc ripper. Tough conditions that tear upand wear out stock/OEM points are NO PROBLEM for our exclusive Chrome Carbide designs.ShieldAg combines proven Acra-Plant technology with up-to-date ShieldAg Engineering to provide long-last-ing, self-sharpening Chrome Carbide deep tillage tools. All parts are made in the USA using the finest quali-ty materials and a chrome carbide chemistry designed exclusively for our Midwest soil types. ShieldAgChrome Carbide Ripper and Subsoiler Points are designed to last two to three times longer than theOriginal Equipment parts, and they self scour, wear sharp, and deflect soil flow away from the shank. Yourcustomer saves on down-time, fuel and shank wear, adding dollars to their bottom line. Many different bolt-on, pin-on, and weld-on shank guards are designed just for most Rippers or Subsoilers.

ShieldAg Chrome Carbide ripper points are available for inter-row and shallowsubsoiler applications. Our unique nose design takes the hardest ground andwears sharp. The crown reduces slabbing and diverts soil away from the shankto minimize wear. Chrome Carbide scours as it wears sharp to pull easier andreduce topsoil disturbance.The farmer needing to deep rip with more lift and shattering between shanks willwant one of our many types of “winged” ripper points. The scouring action ofour Chrome Carbide will reduce fuel costs because the ripper will pull more easily.

Chrome Carbide Pin-on, clamp-on and weld-on shank guards are available for almost any shank. Chrome Carbide weld-on ripper caps areavailable from the factory on our alloy ripper point assemblies, or the capcan be sold separately for repairs and the do-it-yourself farmer.

Acra-Plant/ShieldAg Chrome Carbide tillage tools are perfect for tough groundconditions and conservation tillage plans.


Chrome Carbide Ripper & Subsoiler Points

4-1

Subs

oile

r/Ri

pper

4-2 1-800-798-1968 • WWW.SHIELDAG.COM

Chrome Carbide Ripper & Subsoiler Points

MADE IN THE U.S.A.

Acra-Plant is Proud to Introduce the Future of Subsoiling Technology with our NEW LINE of Conservation Ripper Points.

DoesyourConservationTillageYieldimprovementProgramincludeSubsoilingorDisc/Rippingtorelievecompactionzonesandimprovesoiltilth?

Acra-Plant has your answer with our NEW LINE of CRP Points designed to:• Relieve soil compaction zones for YIELD IMPROVEMENT • Improve SOIL TILTH to increase nutrient availability and root uptake • Produce a subsoil profile that assures improved root penetration • Assure moisture retention in the driest conditions • Provide fracture and lift with little surface disruption or “slabbing” • Allow flexibility in running depth • Scour up, pull easy and flow soil around the shank to reduce wear • Provide long wear life in the widest variety of soil conditions

TheAcra-Plant&ShieldAglineofCRPripperandsubsoilerpointsaredesignedspecificallyforConservationTillagepractices.CRPpointsareavailablewithwingsasshownhereandwithoutwingsforinnerrowandspringfieldwork.Ouruniquedesignallowsustousesolid25%chromecarbideinallofthewearsurfaceswithmountingbootsdesignedspecificallyformostpopularmakesandmodelsofdiscrippersandsubsoilers.Start your Conservation Tillage yield improvement programtoday byaskingforaCRPpointforyourdiscripperorsubsoiler.

Subs

oiler

/Rip

per

Acra-Plant Subsoiler & Ripper Parts are made in the USA

4-3

Shank WeightPart # Description and Machine Manufacturer Width lbs

CRP-1 7" Winged, Deere 510 512 2700, Baker, Krause TL3000 & 4880, Laney 1-1/4 15.8CRP-1-10 10" Winged, Deere 510 512 2700, Baker, Krause TL3000 & 4880, Laney 1-1/4 16.6CRP-2 7" Winged, DMI, CaseIH 870 9300 530 730, Krause Dominator 1-1/4 15.8CRP-2-10 10" Winged, DMI, CaseIH 870 9300 530 730, Krause Dominator 1-1/4 16.6CRP-2B 7" Winged, Brillion Land Commander 1 & 2 1-1/4 15.8CRP-2B-10 10" Winged, Brillion Land Commander 1 & 2 1-1/4 16.8CRP-3 7" Winged, DMI, CaseIH 870 9300 530 730 1-1/2 15.8CRP-3-10 10" Winged, DMI, CaseIH 870 9300 530 730 1-1/2 16.6CRP-4 7" Winged, Sunflower 4300, 4400, 4600-series & M&W Earthmaster 1-1/4 15.8CRP-4-10 10" Winged, Sunflower 4300, 4400, 4600-series & M&W Earthmaster 1-1/4 16.6CRP-5 2-3/8" Flat top for DMI, CASEIH 870 9300 530 730, Krause Dominator 1-1/4 12CRP-6 2-1/2" Narrow Point (no wings),DMI, CaseIH 870 9300 530 730, Krause Dominator 1-1/4 13.8CRP-6B 2-1/2" Narrow Point (no wings), Brillion Land Commander 1 & 2 1-1/4 13.8CRP-7 2-3/8" Flat top, JD 510 512 2700, Baker, Krause TL3000 & 4880, Laney 1-1/4 12CRP-8 2-1/2" Narrow Point, Deere 510 512 2700, Baker, Krause TL3000 & 4880, Laney 1-1/4 13.8CRP-9 7" Winged, Brent Earthquake & CPC 1-1/4 15.8CRP-9-10 10" Winged, Brent Earthquake & CPC 1-1/4 16.6CRP-9R 2-1/2" Narrow Point (no wings), Rawson Zonebuilder 3/4 13.8CRP-9RW 7" Winged, Rawson Zonebuilder 3/4 15.8CRP-10 2-1/2" Narrow Point (no wings), Landoll Weatherproofer 1-1/8 13.8CRP-11 7" Winged, Landoll Weatherproofer 1-1/8 15.8CRP-11-10 10" Winged, Landoll Weatherproofer 1-1/8 16.8CRP-12 7" Winged, Caldwell/Graber 1-1/2 15.8CRP-13 2-1/2" Narrow Point (no wings), Brillion subsoilers with 1" shank 1 14CRP-14 7" Winged, Brillion subsoilers with 1" shank 1 15.8CRP-14-10 10" Winged, Brillion subsoilers with 1" shank 1 16.8CRP-15 7" Winged, Koenig DWK-series 1-1/2 15.8CRP-15N 2-1/2" Narrow point (no wings), Koenig DWK-series 1-1/2 14.5CRP-16 7" Winged, Laney Extra Heavy Duty Plow 1-1/2 15.8CRP-17 2-1/2" Narrow Point (no wings), DMI, CaseIH 870 9300 530 730 1-1/2 13.8CRP-18 2-1/2" Narrow Point (no wings), Unverferth Ripper/Stripper 3/4 13.8CRP-19 7" Winged, Worksaver V-ripper 1-1/4 15.8CRP-20 2-1/2" Narrow Point (no wings), Brillion ST-30 Rip/Strip narrow shank 3/4 13.8CRP-21 2-1/2" Narrow Point (no wings), Allis #9 1 16.8CRP-24 2-1/2" Narrow Point, Sunflower 4300, 4400, 4600-series & M&W Earthmaster 1-1/4 16.8CRP-25 7" Winged, Unverferth Ripper/Stripper 3/4 16.8CRP-26 2-1/2" Narrow Point (no wings) Wilrich SoilPro & 657 DCR/ripper 1-1/4 13.8CRP-26-7 7" Winged, Wilrich SoilPro & 657 DCR/ripper 1-1/4 16CRP-26-10 10" Winged, Wilrich SoilPro & 657 DCR/ripper 1-1/4 16.9CRP-28 7" Winged, Dammer-Diker and Tillage Master, CRP-1 & -8 also fit some models 1-1/4 15.8CRP-34 7" Winged, Besler 4000-series 1-1/4 15.6CRP-37 7" Winged, Quinstar/Orthman SoilShark 1-1/4 15.8CRP-44 2-1/2" Narrow Point, Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series 1-1/4 13.8CRP-44-7 7" Winged, Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC-5 series 1-1/4 16CRP-44-10 10" Winged, Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC-5 series 1-1/4 16.9342-JD-238 2-3/8" Flat Top Ripper point, Deere 900, 915V, Baker in-line and V-rippers 1-1/4 11342-JD-278 2-7/8" Flat Top Ripper point, Deere 900, 915V, Baker in-line and V-rippers 1-1/4 13342-MW-238 2-3/8" Flat Top point Sunflower 4300, 4400, 4600-series & M&W Earthmaster 1-1/4 11342-ORTH-238 2-3/8" Flat Top Ripper point, Quinstar/Orthman Soil Shark 1-1/4 11342-ORTH-278 2-7/8" Flat Top Ripper point, Quinstar/Orthman Soil Shark 1-1/4 13

2‐1/2" 7" 10"

Conservation Points are available in 2-1/2" (no wing), 7" winged, & 10" winged for just about any application!

CONSERVATION RIPPER POINTS Acra's CRP‐Series Points are Designed for These Machines: Conservation Ripper Points

Subs

oiler

/Rip

per

4-4 1-800-798-1968 • WWW.SHIELDAG.COM

Points for Subsoilers & Rippers with 1” Thick Shank1” Shank Designed for Krause 4650, Hamby, Johnson, Roll-A-ConePart# Description WeightTF-103 Springcultivatorpointwithouthardware

•Shallowinter-rowsubsoilerpointwithV-crowndesignforreducedslabbingandsurfacesheeting

•Krausepartnumber33-161• InterchangeswithTF-122(deeptillagepoint)• Pointis2˝widex5-1/2˝long•Casting#103NOTE:BC0001FitsBothTF-103&TF-122

2.68

TF-104 ShinguardforKrause4650•Krausepartnumber33-161A• TF-104is1-1/4˝widex13-3/4˝long

6.50

TF-122 Deepertillageandsubsoilerpointwithouthardware•WiderversionofTF-103designedforsubsoiling•V-crowndesignforreducedslabbing•Pointis2-1/2˝widex5-1/2˝long•Casting#122• InterchangeswithTF-103cultivatorpoint

3.00

1” Shank Designed for Krause 4650, Hamby, Johnson, Roll-A-ConePart# Description WeightAP-800102 Orthman2˝widepointwithAP-510730

5/16˝x1-3/4˝pin•Moderatedepth(6˝–8˝)withV-crowndesign•Pointis2-1/4˝widex6˝long•Casting#TF800102NOTE:ThiswasShieldAgpartnumberAP-800101.Toalignpartnumbersproperly,wearechangingthepartnumbertoAP-800102

3.62

AP-800104 Orthman4˝widepointwithAP-5107305/16˝x1-3/4˝pin•Moderatedepth(6˝–8˝)withV-crowndesign• 4˝wideforincreasedshattering•Pointis4˝widex6˝long•Casting#TF800104NOTE:ThiswasShieldAgpartnumberAP-800102.Toalignpartnumbersproperly,wearechangingthepartnumbertoAP-800104

4.81

AG-8001-DF Orthman2˝widedorsalfinsuboilerpointwithouthardware•Moderatedepth(6˝–8˝)•DorsalFinfurtherreducesslabbingandprotectsshank•Pointis2˝widex8-1/2˝long•Casting#TF800102

5.00

AP-801100 Terra-Flowpointforshankswithflatshinguard,withouthardware•AlsofitsAP-705011chiselshank• Pointis3-1/4˝widex8-1/2”˝long•Casting#801100

4.50

Acra-Plant Chrome Carbide V-Crown Subsoiler & Ripper Points

TF-103

TF-104

TF-122

AP-800102

AP-800104

AG-8001-DF

AG-801100

Subs

oiler

/Rip

per

4-5

1” Shank Designed for Big Ox & Lehman RippersPart# Description WeightAP-800207 BigOxripperpin-onwithAP-5107305/16˝x1-3/4˝pin

(priorto1986“BigRipper”)•Deeptillagepoint6˝–20˝withV-crowndesignforreducedslabbing•Thispointrequires5/16˝holeinshank•ExcellentchoicetorepairwornshanksthatwillnotaccepttheBigOxslip-onpoints•Willreplaceall2D5-seriesBigOxpoints•Pointis2-1/4˝widex7˝long,casting#TF800207

3.33

Part# Description WeightAP-800850 BigOxRipperpin-onwithAP-5107305/16˝x1-3/4˝pin

(1986andlater,including“BigRipper”)•Deeptillagepoint6˝–20˝withV-crown•Widepointforaggressivedeeptillage

3.75

Note:Alsoknownas“BigOxPoint2”

Slip-on points for Big Ox & Lehman RippersPart# Description Weight2D5 BigOx/Lehmanslip-onpoint(priorto1986

• “BigRipper”)• Slip-onflattopductileironpointwithoutanycap•Deeptillagepoint6˝–20˝designedforveryrockysoilsorforcustomersbuildingtheirownpoints

•Pointis1-3/4˝widex6-1/2˝long

3.25

1” Shank Designed for Krause 4650, Hamby, Johnson, Roll-A-ConePart# Description Weight2D5B BigOx/Lehmanslip-onpoint(priorto1986

“BigRipper”)•Slip-onflattoppointwithflatchromecarbidecap•DeepTillagepoint6˝–20˝•Pointis2˝widex7˝long

3.75

2D5BE BigOx/Lehmanslip-onpoint(priorto1986“BigRipper”)•Slip-onextendedpointwithextendedchromecarbidecap•DeepTillagepoint6˝–20˝•Pointis2-1/4˝widex7-1/2˝long

4.00

1˝ Shank Designed for IHC # 10 & #11, Paulk, Big Ed, W&APart# Description WeightAP-800900 V-crowndesignwithAP-5006593/8˝x2˝pin

•Deeptillagepoint6˝–20˝•Pointis2-1/4˝widex7˝long,casting#800900

4.30


Subs

oiler

/Rip

per

AP-800207

AP-800850

2D5

2D5B

2D5BE

AP-800900

4-6 1-800-798-1968 • WWW.SHIELDAG.COM

Points for York Agri Products “Mulcher” Manufactured 1994 & LaterYork Agri Products “Mulcher”, Standard PointPart# Description WeightTF-8006-011 YorkAgriProductsV-crownpointwithouthardware

• Thismachinehasa1-1/4˝thickshankwitha1˝thickfootpieceformountingtheripperpoint

•Deeptillagepoint(6˝–12˝)• Excellentminimumsurfacedisturbancepoint• Pointis2-1/4˝widex10˝long•Casting#TF8006-011

5.50

NOTE:ForYorkAgriProducts“Mulcher”machinesmanufactured1993andearlier,USEAP-800601,seepage4-7

York Agri Products “Mulcher”, Winged PointPart# Description WeightTF-8006-011W YorkAgriProductswingedpointwithouthardware


•WingedversionofTF-8006-011forimprovedshattering•Pointis6˝widex10˝long•Casting#TF8006-011W

7.40

NOTE:ForYorkAgriProducts“Mulcher”machinesmanufactured1993andearlier,USEAP-800601W,seepage4-7


TF-8006-011

TF-8006-011W

Subs

oiler

/Rip

per

4-7

Points for Subsoilers & Rippers with 1-1/4˝ Thick Shank Brent, Unverferth, IH #14, Lindsay Dammer–Diker without Dorsal FinPart# Description WeightAP-800500 V-crownripperpointwithAP-5006467/16˝x2˝pin

•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Pointis2-3/8˝widex10-1/2˝long•Casting#800500

6.33

JD 900, JD950V, P&M, P-K, Laney, Baker, Lehman Big Shank Part# Description WeightAP-800601 V-crownripperpointwithAP-5006593/8˝x2˝pin

•Acra-Plant’smostpopularChromePoint•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Anexcellentchoiceforimproveddeeptillageformosfactory1-1/4˝shankdeeprippers

•Pointis2-1/4˝widex10˝long•Casting#8006-01

6.33

Note:ForYorkAgriProducts“Mulcher”manufactured1994andlater,seeTF-8006-011onPage4-6

JD 900, JD950V, P&M, P-K, Laney, Baker, Lehman Big Shank & Other 1-1/4˝ ShanksPart# Description WeightAP-800601W V-crownripperpointwithwingswithAP-500659

3/8˝x2˝pinDeeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•AllofthefeaturesoftheAP-800601withwingsaddedforadditionalshatteringcapability—greatforfracturingreallydry,hardground

•Pointis6˝widex10˝long•Casting#8006-01W

6.40

Note:ForYorkAgriProducts“Mulcher”manufactured1994andlater,seeTF-8006-011WonPage4-6

Brent, Unverferth, IH #14, Lindsay Dammer–Diker without Dorsal FinPart# Description WeightAP-800800 V-crownripperpointwithAP-5006593/8˝x2˝pin

•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Pointis2-1/4˝widex10˝long

5.50

Bush Hog Dorsal Fin PointPart# Description WeightTF-81322 Deeptillagepoint6˝–20˝,withouthardware

•Dorsalfinreducesslabbingandprotectsshank•Pointis2˝widex9˝long

6.50

Acra-Plant offers the ONLY full line of V-Crown Chrome Carbide Ripper Points for machines with 1-1/4˝ shanks

AP-800500

AP-800601

AP-800601W

AP-800800

TF-81322

Subs

oiler

/Rip

per


4-7

Points for Subsoilers & Rippers with 1-1/4˝ Thick Shank Brent, Unverferth, IH #14, Lindsay Dammer–Diker without Dorsal FinPart# Description WeightAP-800500 V-crownripperpointwithAP-5006467/16˝x2˝pin

•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Pointis2-3/8˝widex10-1/2˝long•Casting#800500

6.33

JD 900, JD950V, P&M, P-K, Laney, Baker, Lehman Big Shank Part# Description WeightAP-800601 V-crownripperpointwithAP-5006593/8˝x2˝pin

•Acra-Plant’smostpopularChromePoint•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Anexcellentchoiceforimproveddeeptillageformosfactory1-1/4˝shankdeeprippers

•Pointis2-1/4˝widex10˝long•Casting#8006-01

6.33

Note:ForYorkAgriProducts“Mulcher”manufactured1994andlater,seeTF-8006-011onPage4-6

JD 900, JD950V, P&M, P-K, Laney, Baker, Lehman Big Shank & Other 1-1/4˝ ShanksPart# Description WeightAP-800601W V-crownripperpointwithwingswithAP-500659

3/8˝x2˝pinDeeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•AllofthefeaturesoftheAP-800601withwingsaddedforadditionalshatteringcapability—greatforfracturinreallydry,hardground

•Pointis6˝widex10˝long•Casting#8006-01W

6.40

Note:ForYorkAgriProducts“Mulcher”manufactured1994andlater,seeTF-8006-011WonPage4-6

Brent, Unverferth, IH #14, Lindsay Dammer–Diker without Dorsal FinPart# Description WeightAP-800800 V-crownripperpointwithAP-5006593/8˝x2˝pin

•Deeptillagepoint(6˝–12˝)• V-crowndesignforreducedslabbing•Pointis2-1/4˝widex10˝long

5.50

Bush Hog Dorsal Fin PointPart# Description WeightTF-81322 Deeptillagepoint6˝–20˝,withouthardware

•Dorsalfinreducesslabbingandprotectsshank•Pointis2˝widex9˝long

6.50

Acra-Plant offers the ONLY full line of V-Crown Chrome Carbide Ripper Points for machines with 1-1/4˝ shanks

AP-800500

AP-800601

AP-800601W

AP-800800

TF-81322

Subs

oiler

/Rip

per


4-8 1-800-798-1968 • WWW.SHIELDAG.COM

JD 900, JD950V, P&M, P-K, Laney, Baker, Bush Hog,Lehman Big Shank, Quinstar & other 1-1/4˝ shanksPart# Description Weight342-JD-238 Pin-onflattoppoint,2-3/8˝widecapwithouthardware

•Anexcellentchoiceforimproveddeeptillageformostfactory1-1/4˝shankdeeprippers

•Aneconomicalchoicefordeeprippingwork•Pointis2-1/2˝widex12˝long•Casting#TF23812

6.25

342-JD-278 Pin-onflattoppoint,2-7/8˝widecapwithouthardware•Anexcellentchoiceforimproveddeeptillageformostfactory1-1/4˝shankdeeprippers

•Aneconomicalchoicefordeeprippingwork•Pointis3˝widex12˝long•Casting#TF27812

6.75

Note:TheseripperpointswillinterchangeinapplicationsusingAP-800601orAP-800601Wsolidchromecarbidepoints

M&W & Sunflower Rippers & Disc Rippers with 1-1/4˝ ShankPart# Description Weight342-MW-238 YorkAgriProductswingedpointwithouthardware


•WingedversionofTF-8006-011forimprovedshattering•Pointis6˝widex10˝long•Casting#TF8006-011W

6.25

TB0034 Pin-onflattoppoint,2”widecapwithouthardware•Anexcellentchoiceforimprovedinnerrowtillage•Aneconomicalchoicefordeeprippingwork•Casting#TF1786orB-178-6

AP-800850 Pin-onflattoppoint,1-15/16”widecapwithouthardware•Anexcellentchoiceforimprovedinnerrowtillage•Aneconomicalchoicefordeeprippingwork•Casting#TF117orF-200-4

BC0001 B-CRippertoAcraplantAdapter• Anexcellentchoiceforimprovedinnerrowtillage•Aneconomicalchoicefordeeprippingwork

Notes:ThisripperpointwillinterchangewithCRP-4ifcustomerdesiresConservationRipperPoint42-MW-278alsoavailable

V-Crown Subsoiler & Ripper Points for Machines with 1-1/2˝ Thick ShankCaldwell, Graber & Laney RippersPart# Description WeightAP-800700 V-crownripperpointwithAP-5006581/2x2-1/4˝pin

•Deeprillagepoint(6˝–12˝)•V-crowndesignforreducedslabbing•Pointis2-1/2˝widex11-1/2˝long•Casting#TF800700

8.50

Landoll 1600, Brillion 1-1/2 Shank, Older Model Tebben Rippers with 1-1/2˝ shank Tye & Bigham BrothersTF-123 PointforTye&BighamBrothers,withouthardware

•ParaTill/ParaPlowoffsetshankrippers•Pointis2-1/2˝widex8˝long•Casting#TF123

6.10

Acra-Plant Chrome Carbide V-Crown Subsoiler & Ripper PointsSu

bsoil

er/R

ippe

r

342-JD-238

AP-800700

TF-123

342-MW-238

AP-800850

4-9

Specialty Points for OEM ReplacementTheAcra-PlantLineofBlu-JetPointshavebeenredesignedtooptimizethefit,lowerdraftrequirements,improvetheattackangleandprovidemoreprotectionoftheshankbottom

Blu-Jet Sub TillersPart# Description WeightAP-801300 Inner-rowpoint(alsoconsidered“springpoint”)

•Narrowpointfordeeptillage•V-crownchromecarbidepointscoursupquicklyandpullseasily

• Pointis2˝widex14˝long•Casting#TF801300

11.00

NOTE:Usesfactoryhardware,notsuppliedbyAcra-Plant

Part# Description WeightAP-801400 Widepoint(alsoconsidered“Fallpoint”)

•Widerpointfordeepertillage,moreshatteringaction•V-crownchromecarbidepointscoursupquicklyandpullseasily

•Designedtorun“nose-down”foroptimumperformance•Pointis2-7/8˝widex15-1/2˝long•Casting#TF801400

16.00


Part# Description WeightAP-801600 ShinguardforBlu-Jetsubtiller

• Improvedcastingchemistrytoresistbreakage•Guardis1-1/4˝widex22˝long

14.50


Part# Description WeightAP-503300 Blu-JetSpring(OEM)

•Replacescasting#BJ3ASPRING/5033orAP50337.0

AP-503200 Blu-JetFALL(OEM)•Replacescasting#BJ3AFALL/5032orAP5032

13.6

AP-801300

AP-801400

AP-801600

AP-503300

AP-503200

Subs

oiler

/Rip

per


4-10 1-800-798-1968 • WWW.SHIELDAG.COM

Part# Description WeightAP-800106 •OrthmanStrip-Tillpoint

•Diamondnose• Tapered2½”Wing•Useon1”wideshanks• ImprovesuponOrthmanpartnumber164-057

11.80

Acra-Plant VPS RippersOptimizetheperformanceofyourVPS2000orVPS3000RipperwithOriginalAcra-PlantChromeCarbidePointsandNickelAlloyShinGuards

VPS 2000 – 1-Hole Shank MountPart# Description WeightTF-820102 V-crownpointwithwings,VPS2000

•Pointis3˝widex9˝long•Casting#TF820102

5.60

TF-820101 V-CrownPoint,withoutwings,VPS2000•SameasTF-820102,withoutwings•PointIs1-3/4˝widex9˝long•Casting#TF820101

4.80

NOTE:AllVPSRipperPointsusefactoryhardware,notsuppliedbyAcra-Plant.

VPS 3000 – 2-Hole Shank MountPart# Description WeightTF-820108 V-crownpointwithwings,VPS3000

•Pointis4˝widex10˝long•Casting#TF820108

10.21

NOTE:AllVPSRipperPointsusefactoryhardware,notsuppliedbyAcra-Plant.

Part# Description WeightTF-129 NickelalloyshinguardforVPS2000andVPS3000

•ReplacesAP-820106andTF-820106• TF-129isalsodesignedforQuinstar,BakerandP-Krippers

• TF-129is1-1/4˝widex22-1/2˝long

10.10

NOTE:Wehaveimprovedthecastingchemistryfor2004toresistbreakageinrockyorhard/frozenground.Usesfactoryhardware,notsuppliedbyAcra-Plant.

Replacement Shanks available for VPS RippersPart# Description WeightAP-10420 11/4˝ShankforVPS2000 132.0AP-20406 1-1/4˝ShankforVPS3000 88.0NOTE:Improvedusingabrasion-resistantHighStrengthSteel.

*SpecialOrderOnly

Acra-Plant Chrome Carbide V-Crown Subsoiler & Ripper PointsSu

bsoil

er/R

ippe

r

TF-820102

AP-800106

AP-20406

TF-820108

TF-129

4-11

Acra-Plant Nickel Alloy Shank Guards (Shin Guard) to replace cast OEM Shank Guards�OEMReplacementShankguardshavebeenIMPROVEDfor2010usingthelatestinNickelAlloycastingtechnologytoimproveresistancetofractureinrocky,frozenandhardgroundwithlittledegradationinwearlifecomparedtoChromeCarbide.

Part# Description WeightTF-104 ShinGuardforKrause4650

•Krausepartnumber33-161A• TF-104is1-1/4˝widex13-3/4˝long

6.50


Part# Description WeightAP-801600 ShinGuardforBlu-JetSubTiller

•Guardis1-1/4˝widex22˝long14.50


Part# Description WeightTF-129 ShinGuardforVPS2000andVPS3000

•ReplacesAP-820106andTF-820106• TF-129isalsodesignedforQuinstar,BakerandP-Krippers• TF-129is1-1/4˝widex22-1/2˝long

14.50


Weld-On Shank Guards & Wear PlatesAcra-PlantAlloyWeld-onShankGuardsandWearPlatesprotectorrepairwornSubsoiler/RipperShanks.Weld-onShankGuardsaresegmentedsothattheymayeasilybebrokenintosectionstoworkonparabolicandodd-shapedshanks.Theseguardsofferaneconomicalwaytoprotectrippershanksandrepairwornshanks.OuruniqueChromeCarbidechemistryscoursquicklyandthesegmenteddesignbreaksupdirtflowtominimizeslabbing.Allguardsarecasttobeslightlywiderthantheshankstheyprotecttoavoidscouringofthewelds.Use7018weldingrodorLowHydrogenWiretoweldtheseguardson.

Flat Top Weld-On Sectional Guards

Part# Description WeightSG-114-9 Flattopsectionalguard,1˝widex9˝long

•Useon3/4˝wideshanks1.00

SG-112-9 Flattopsectionalguard,1-1/2˝widex9˝long•Useon1-1/4˝wideshanks

1.10

SG-175-7 Flattopsectionguard,1-3/4”widex7”long•Useon1-1/2”wideshanks

1.00

Subs

oiler

/Rip

per

Shank Guards, Shin Gurards & Ripper Caps

TF-104

AP-801600

TF-129

SG-114-9

4-12 1-800-798-1968 • WWW.SHIELDAG.COM

Half-Round Weld-On Sectional GuardsPart# Description WeightSGR-114-14 Half-roundsectionalguard,1-1/4˝widex12˝long

•Useon1˝wideshanks1.10

SGR-138-12 Half-roundsectionalguard,1-3/8˝widex12˝long•Useon1˝or1-1/4˝wideshanks

1.80

SGR-112-14 Half-roundsectionalguard,1-1/2˝widex12˝long•Useon1-1/4˝wideshanks

1.20

Weld-On Shank Wear Plates, 3˝ x 6˝ x 5/16˝ thickPart# Description WeightTF-147L Left-handwearplate,weld-on,15°parallelogram 1.60SGR-138-12 Right-handwearplate,weld-on,15°parallelogram

•Wearplatesforjustaboutany15-degreestraightshank•Beveledfrontedgetoimprovesoilflow

1.60

Acra-Plant Alloy Weld-on Ripper Caps & Edge GuardsWeld-onChromeCarbiderippercapsofferaneconomicalwaytorenewwornripperpointsorbuildcustompointstosuitindividualneeds.Flatcapsworkgreattoextendthelifeofmoldboardplowlandsidesandshares.Use7018weldingrodorLowHydrogenWiretoweldthesecapson.

Weld-On Flat Ripper Caps (wear caps), 5/16˝ Thick x 4˝ LongPart# Description WeightF-200-4 2”wide 0.70

F-212-4 2-1/2”wide 0.88

Shank Guards, Shin Gurards & Ripper CapsSu

bsoil

er/R

ippe

r

SGR-114-14

TF-147L

4-13

Weld-On Bump-Nose Ripper Caps Thesecapsaresimilartoflatcapswiththeadditionofalightbumpatthenosetoofferextendedwearprotectionwhenusedonrippers

Part# Description WeightB-178-6 1-7/8”widex6”long 1.70B-238-12 2-2/8”widex12”long 3.50B-238-12 2-7/8”widex12”long 3.88

Weld-On Bump-Nose Ripper Caps with Bevel FrontThesecapsaresimilartoBump-nosecapswiththeadditionofaledgeatthenosetofitovertheripperpointbase

Part# Description WeightBE-238-7 2-3/8”widex7”long 2.25BE-278-12 2-7/8”widex12”long 4.10

Acra-Plant & ShieldAg offer the Widest Selection of High-Value Chrome Carbide Subsoiler & Ripper Points &

Repair Parts in the Tillage Industry

Shank Guards, Shin Gurards & Ripper Caps

BE-278-12

BE-278-12

Subs

oiler

/Rip

per

4-14 1-800-798-1968 • WWW.SHIELDAG.COM

Shank Guards, Shin Gurards & Ripper CapsSu

bsoil

er/R

ippe

r

Chrome Carbide General Application Edge ProtectorsPart# Description WeightSI-12 1”x14”V-nosewith1/2”x3/16”weld-onstep

•SI-seriesV-noseedgeprotectorsareperfectforpotatodiggerblades

1.11

SI-12HD 1-3/4”x12”V-nosewith1/2”x3/8”weld-onstep•SI-seriesV-noseedgeprotectorsareperfectforpotatodiggerblades

•Casting#TF-106SI-12HD

2.17

SGT-12X1/2 1/2”x12”Triangular-shapedsegmentedguard• 3segmentsare4”long•Perfectforweldingtoharrowtinesoronpasturerenovationequipment

0.46

Weld-On Segmented GuardsPart# Description WeightKTWS-01 9/16”x6”SegmentedGuard

• 4segmentsare1-1/2”long0.34

KTWS-02 3/4”x6”SegmentedGuard 0.49KTWS-05 9/16”x6”Fert.KnifeWearShin 0.33KTWS-06 3/4”x1.96”ScraperBit 0.17KTWS-07

SI-12

SI-12HD

SGT-12X1/2

KTWS-01


Acra-Plant V-Slice Inserts

Acra-Plant V-Slice Inserts Time-tested and improved V-slice inserts for just about any row crop planter or lister. Improveseed-to-soil contact in the toughest planting conditions with Acra-Plant V-slice technology. All Acra-Plant V-slice inserts either COME WITH hardware or use the Original Equipment hardware for ease of installation.Acra-Plant V-slice openers that replace Original Equipment Seed Tube Guard/Inner ScrapersPart # Description WeightAP-001685 V-slice insert with pin/bolt White 6000 Series and later 1.88

• Designed for replacement of OEM seed tube guard/inner scraper

• Spring pin and bolt/nut provided with insert

AP-001785 V-slice insert with pin/bolt John Deere & Kinze 2000 2.00• Designed for replacement of OEM

seed tube guard/inner scraper• Spring pin and bolt/nut provided with insert

AP-001985XP V-slice for John Deere 1700-series XP Row units 2.24• Designed for replacement of OEM seed tube guard• No hardware required, bayonet mount

AP-001885 Kinze 3000 series V-slice opener 1.26• Designed for replacement of OEM

seed tube guard/inner scraper• Uses same socket head cap screws as OEM scraper

Replacement V-slice Inserts for Acra-Plant Planter/Lister assemblies Part # Description WeightAP-410000 Acra-Plant tandem blade opener slicing blade with bolt 2.20

• Main replacement insert 10-C for Acra-Plant tandem blade opener

AP-410100 Acra-Plant tandem blade rear opener slicing stub 1.01withJ-bolt• Short (rear) replacement insert for Acra-Plant tandem

blade opener and V-9 Acra-Plant opener for CaseIH 400-500 with offset discs

AP-954141 V-slice lister opener with J-bolt, 7-C 1.30• Replacement insert for Acra-Plant lister opener AP-959600

For complete descriptions of Acra-Plant No-Till planter/lister/drill enhancements, please see ourAcra-Plant No-Till Catalog.

Made in the USA

V-Sl

ice I

nser

ts

AP-001685

AP-001785

AP-001985XP

AP-001885

AP-410000

AP-410100

AP-954141

5-3

Acra-Plant V-Slice Inserts

V-Sl

ice In

serts

Chrome Carbide General Application Edge ProtectorsPart# Description WeightAP-410601 IER3slicinginsertwithpins

•ReplacementinsertforAcra-PlantAP-009840V-98Opener•CaseLH800-1200planters•Casting#410601

1.28

AP-410602 V51slicinginsertwithpins•ReplacementinsertforAcra-PlantAP-034550Opener•White5100and5700planters•Casting#410602

1.04

Replacement V-slice Inserts for Acra-Plant Acra Drill Unit (ADU) and fertilizer attachmentsPart# Description WeightAP-A331100 ADUinsertJDI3withbolts/nutsforAcraDrillUnit

•ReplacementinsertforAcra-PlantADU•Casting#331100

1.88

AP-API4L Acra-Placeinsert,19978andlater,lefthand•ReplacementinsertforAcra-Plantfertilizeropeners•Casting#691241L

1.89

AP-API4R Acra-Placeinsert,1997andlater,righthand•ReplacementinsertforAcra-Plantfertilizeropeners•Casting#691240R

1.89

ForcompletedescriptionsofAcra-PlantNo-Tillplanter/lister/drillenhancements,pleaseseeourAcra-PlantNo-TillCatalog.

All Acra-Plant V-slice attachments are MADE IN USA using the finest Acra-Tuff Chrome Carbide alloy for durability and long wear-life.

Our foundry uses state-of-the-art equipment and quality control proce-dures to assure TOP QUALITY and LONG LIFE.

AP-410601

AP-A331100

AP-API4L

AP-410602


Acra-Plant Cultivator Points & Sweeps

AP-871101

AP-871107

AP-871201

Acra-Plant Cultivator Points & Sweeps Acra-Plant Acra-Tuff Alloy Points and Sweeps are made in USA and will wear 3–4 timeslonger than hardfaced high-carbon steel cultivator tools and up to 6 times longer thanplain high-carbon tools! Acra-Plant points and sweeps will wear sharp and hold theirshape throughout their long wear life.You’ll reduce downtime, especially on really wideimplements.

All cultivator tools come with mounting hardware

Standard Mount Field Cultivator ToolsPart # Description Weight

AP-871101 2-3/4˝ Field cultivator point, with hardware 2.15 • 2 Holes on 2˝ shank hole spacing• Casting # 871101


AP-871201 2-3/4˝ Field cultivator point, with hardware 2.20 • Hole and slot mounting accommodates 1-5/8˝ to 1-3/4˝ spacing• Casting # 871201


AP-871107 7˝ Field cultivator sweep, with hardware and wedge 4.50 • Hole and slot for 1-5/8˝ to 2˝ shank hole spacing• Casting # 871107

All of these points and sweeps come with mounting hardware

Culti

vato

r Poi

nts/

Swee

ps

Made in the USA

6-2 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant Cultivator Points & SweepsCu

ltiva

tor P

oints

/Sw

eeps

Danish Tine Points & Sweeps (“S” Tines)Part# Description WeightAP-860102 • 1”Spikewithneopreneshimandhardware 0.80

AP-860202 • 2-1/2”Goosefootwithneopreneshimandhardware•Singleholemounting•Casting#860202

1.10

AP-860402 • 4”Sweepwithneopreneshimandhardware• (4”OKsweep),singleholemounting•Casting#860402

1.10

AP-860702 • 7”Sweepwithneopreneshimhardware• (7”OKsweep),singleholemounting•Casting#860702

2.12

Sweeps Designed for Kongskilde 3000-SeriesPart# Description WeightAP-861202 • 2-1/2”Sweepwithhardware(noshim)

• 2-holemountingdesignedforKongskilde300-series(3500,3800)

1.70

NOTE:AP-861202Kongskildesweepcomeswithmountinghardwarebutdoesnotincludeshim.

All of these points and sweeps come with a form-fitting neoprene shim and mounting hardware to assure perfect fit on your equipment

AP-860102

AP-860202

AP-860402

AP-860702

AP-861202

MADE IN THE U.S.A.

7-1

Adding Acra-Plant Chrome Carbide Components to your existingequipment will yield additional acres of wear life and reduced downtime� Use Weld-On Points to repair worn parts or build your own custom tools�

OEM Replacement Pin-on Cultivator PointsPart# Description WeightTF-130N Orthman164-043point

• Improvedfor2005withChiselNosetoenhancepenetrationandwearlife

•Casting#TF130orTF130N

2.85

See SECTION 4 of this catalog for all of our chrome carbide ripper & subsoiler points

MADE IN THE U.S.A.

Spec

ialAp

plica

tion

Acra-Plant Special Application Chrome Carbide

AP-860102

7-2 1-800-798-1968 • WWW.SHIELDAG.COM

Spec

ialAp

plica

tion


Chisel PlowUse7018weldingrodorLowHydrogenWinetoweldtheseparts.Consultfactoryfordetails.

Weld On Chisel PointPart# Description WeightTFN-1006 •Heavy-dutychiselpoint,4-3/4”longx3”wide

•Designedtoweldon3”twistedchisels,pocketundersidetoweldontotheendofchiselorfabricatedspike

•Casting#TFN1006

1.04

Cultivators, Sweeps, Chisel Plows or Listers Acra-Plant has solid chrome carbide points to help you improve performance and add wear life for the

“Do-It-Yourself” farmer.

MADE IN THE U.S.A.

2014 ACRA-PLANT CHROME CATALOG 7-3

Rod Weeder Points UseAcra-Plantchromecarbiderodweederpointstoimprovetheperformanceandwearlifeofyourrodweeder.

Part# Description WeightAP-890000 Calkinsrodweederpoint

•Casting#8900002.11

AP-890100 FlexKingRodWeederPoint• ForFlexKing,Miller/Morrisandotherlargepointrodweeders•Casting#890100

3.46

Chrome Carbide Points for Strip Till, Fertilizer & Chisel Plow RigsAllofthesepointsaredesignedtoweldonfabricatedbarstockandareslightlywiderthanthebarstocktheyaredesignedtofit,toprovidemaximumprotectionfromwear.Use7018weldingrodorLowHydrogenWiretoweldtheseparts.Consultfactoryfordetails.

Part# Description Weight717SM 1.06

DF1PM 1.78

DF1PM-PO 2.62

DF1ST 2.80

Building your own fertilizer or strip till rig? We’ve got your point!

717SM

DF1PM

DF1PM-PO

AP-890100

AP-890000

DF1ST

Spec

ialAp

plica

tion


2014 ACRA-PLANT CHROME CATALOG 1

Shield Pry Bars

i

CatalogNumber

Acra-Plant/ShieldAgPart Number Description

11 AP-720011X DrillPoint

14 AP-729390 DrillPoint41 AP-700041 FertilizerPoint42 AP-700042 FertilizerPoint OBSOLETE

44 AP-700044 FertilizerPoint66 AP-729400 DrillPoint73 DNC-657D DrillPoint73 DNC-657DEB DrillPoint75 AP-729410 DrillPoint087 TFN-1010 ListerPoint OBSOLETE

98 AP-729390 DrillPoint99 AP-729400 DrillPoint103 TF-103 RipperPoint122 TF-122 RipperPoint657 DNC-657D DrillPoint8201 TF-820102 VPSPoint8202 TF-820202 VPSPoint52896 AP-801600 ShinGuard300136 TF-129 ShinGuard331100 AP-331100 V-SliceInsert410601 AP-410601 V-SliceInsert410602 AP-410602 V-SliceInsert410901 AP-410901 V-SliceInsert OBSOLETE

500274 AP-708003 Wedge691240 AP-API4R V-SliceInsert691241 AP-API4L V-SliceInsert700141 AP-700042 FertilizerPoint705141 AP-705141 ChiselPoint720011 AP-720011X DrillPoint800500 AP-800500 RipperPoint800900 AP-800900 RipperPoint801100 AP-801100 RipperPoint801101 AP-801101 RipperPoint OBSOLETE

801200 AP-801200 RipperPoint OBSOLETE

860102 AP-860102 DanishTine860202 AP-860202 Goosefoot860402 AP-860402 Sweep860702 AP-860702 Sweep861202 AP-861202 Goosefoot861402 AP-861402 Sweep OBSOLETE

871101 AP-871101 CultPoint871107 AP-871107 Sweep871109 AP-871109 Sweep OBSOLETE

871201 AP-871201 CultPoint890000 AP-890000 RodWeeder890100 AP-890100 RodWeeder

CatalogNumber


11CC AP-720011X DrillPoint164-037 AP-800102 RipperPoint164-039 AG-8001-DF RipperPoint164-041 AP-800104 RipperPoint164-043 TF-130N CultPoint5-919-606 AP-890000 RodWeeder657DEB DNC-657DEB DrillPoint657PO AP-729410 DrillPoint657V DNC-657V DrillPoint715V DNC-715V DrillPoint716S 716S FertilizerPoint73CC DNC-657D DrillPoint73CC DNC-657DEB DrillPoint75CC AP-729410 DrillPoint78CC TF-150 RenovatorPoint OBSOLETE

8006-01 AP-800601 RipperPoint8006-01W AP-800601W RipperPoint809I AP-720011X DrillPoint809V DNC-809V DrillPoint OBSOLETE

98CC AP-729390 DrillPointA11 AP-720011X DrillPointA14A AP-729390 DrillPointAG-7100-60 AP-710060 DrillPointAG-7100-70 AP-710070 DrillPointAG-7120-00 AP-712000 DrillPointAG-8001-DF AG-8001-DF RipperPointAP-809-01 DNC-809V DrillPoint OBSOLETE

AP12 AP-691042 V-SliceInsert OBSOLETE

AP13L AP-691041 V-SliceInsert OBSOLETE

AP13R AP-691040 V-SliceInsert OBSOLETE

AG-809-01 DNC-809V DrillPointAP12 AP-691042 V-SliceInsertAP13L AP-691041 V-SliceInsertAP13R AP-691040 V-SliceInsertAP14L AP-API4L V-SliceInsertAP14R AP-API4R V-SliceInsertAPFC-1 AP-708041 FertilizerPointARP1 AP-800401 RipperPointASV1 AP-410901 V-SliceInsert OBSOLETE

ATC1 AP-820105 Cap OBSOLETE

ATP1 TF-820101 VPSPointATP2 TF-820102 VPSPointATP4 TF-820108 VPSPointATS1 TF-129 ShinGuardATW1 AP-820103 Wing OBSOLETE

ATW2 AP-820104 Wing OBSOLETE

Acra-Plant/ShieldAg Part Number ConversionsAppendix

ii 1-800-798-1968 • WWW.SHIELDAG.COM

Acra-Plant/ShieldAg Part Number Conversions

Appendix

CatalogNumber


BJ3AFALL AP-801400 RipperPointBJ3ASPRING AP-801300 RipperPointBOP1 AP-800207 RipperPointBOP2 AP-801000 RipperPoint OBSOLETE

BRP1 AP-800601 RipperPointCAP1 AP-708041 FertilizerPointCCP-1 DNC-657D DrillPointCCP-1 DNC-657DEB DrillPoint

CCP4 AP-720011X DrillPoint

CEL1 AP-954141 V-SliceInsert

CEO1 AP-410000 V-SliceInsert

CES1 AP-410100 V-SliceInsert

CP20 AP-800102 RipperPoint

CP5026 AP-801600 ShinGuard

CP65 TF-65B CaseIHRasp

CP66 TF-66RB CaseIHRasp OBSOLETECT-3 TFN-1005 ChiselPoint OBSOLETECUP1 AP-871101 CultPoint

CUP2 AP-871201 CultPoint

DNC4100 AP-410000 V-SliceInsert

DNC4141 AP-954141 V-SliceInsert

DNC559T TF-123 RipperPoint

DNC-757I AP-720011X DrillPoint

DNC8001 TF-122 RipperPoint

DNC-809I AP-720011X DrillPoint

DNC-827P AP-710070 DrillPoint

DNC-829 AP-710060 DrillPoint

DST1 AP-860102 DanishTine

DST2 AP-860202 Goosefoot

DST4 AP-860402 Sweep

DST7 AP-860702 Sweep

DSZ10 AP-729410 DrillPoint

DSZ11 AP-720011X DrillPoint





E1 AP-720011X DrillPoint

E4 AP-729390 DrillPoint

E6 AP-729400 DrillPoint

FAD2 AP-699014 ChromeWheel OBSOLETEFAD3 AP-699114 ChromeWheel OBSOLETEFCP1 AP-705141 ChiselPoint

FCS11 AP-871111 Sweep OBSOLETEFCS7 AP-871107 Sweep

FCS9 AP-871109 Sweep OBSOLETEGRP1 AP-800700 RipperPoint

CatalogNumber


HK-1P TF-150 RenovatorPoint OBSOLETEIER3 AP-410601 V-SliceInsert

IRP1 AP-800500 RipperPoint

IRP2 AP-800900 RipperPoint

JDI3 AP-331100 V-SliceInsert

JDM2 AP-001785 V-SliceInsert

JDSA AP-957273 SeedAdapter

JHZ1 AP-712000 DrillPoint OBSOLETEJRP1 AP-800601 RipperPoint

KMC1 AP-801500 RipperPoint OBSOLETEKRP1 TF-122 RipperPoint

KST2 AP-861202 Goosefoot

KST4 AP-861402 Sweep OBSOLETEKWRP1 AP-800601 RipperPoint

LRP1 AP-801200 RipperPoint OBSOLETEMWRP1 AP-800800 RipperPoint

NHP1 AP-700041 FertilizerPoint

NHP4 AP-700044 FertilizerPoint

NHP5 AP700042 FertilizerPoint OBSOLETEORP1 AP-800102 RipperPoint

ORP2 AP-800104 RipperPoint

ORP3 AP-801100 RipperPoint

ORP4 AP801101 RipperPoint OBSOLETERWP1 AP-890000 RodWeeder

RWP2 AP-890100 RodWeeder

SAB1 AP-300039 ADUSpringBar

SI-12HD SI-12HD EdgeGuard

SR9175 TF-66RB CaselHRasp OBSOLETESR9336 TF-65B CaseIHRasp

SSPL AP-880001 SoilSaver OBSOLETESSPR AP-880000 SoilSaver OBSOLETETFCC13 TF-CC13 KnifeEdge OBSOLETETFCC131 TF-CC13-1 KnifeEdge OBSOLETETF102 TF-102 CutPoint OBSOLETETF105 AP-729410 DrillPoint

TF106 SI-12HD EdgeGuard

TF111 AP-710060 DrillPoint

TF123 TF-123 RipperPoint

TF130 TF-130N CultPoint

TF130N TF-130N CultPoint

TF132 AP-729390 DrillPoint

TF148 TF-148 GoldenSpike OBSOLETETF150 TF-150 RenovatorPoint OBSOLETETF23812 342-JD-238 RipperPoint

TF27812 342-JD-278 RipperPoint

TF66RB TF-66RB CaslHRasp OBSOLETETF700041 AP-700041 FertilizerPoint

TF700044 AP-700044 FertilizerPoint

iii

Acra-Plant/ShieldAg Part Number Conversions

All Acra-Plant Chrome Carbide Products are MADE IN USA using the finest Acra-Tuff alloy for durability and long wear-life. Our foundry uses state-of-the-art equipment and quality

control procedures to assure TOP QUALITY and LONG LIFE.

MADE IN THE U.S.A.

CatalogNumber


TF800102 AP-800102 RipperPoint



TF8006-011 TF-8006-011 RipperPoint

TF8006-011W TF-8006-011W RipperPoint




TF820101 TF-820101 VPSPoint




TFN1005 TFN-1005 ChiselPoint OBSOLETETFN1006 TFN-1006 ChiselPoint

TFN1010 TFN-1010 ListerPoint OBSOLETETFRP1 AP-801400 RipperPoint

TSRP1 AP-801300 RipperPoint

WAW1 AP-034550 Wedge

WHI1 AP-410602 V-SliceInsert

Z10 AP-729410 DrillPoint

Z11 AP-720011X DrillPoint




CastingNumber


809V AP-720011XV DrillPointDNC-809V AP-720011XV DrillPoint705042 AP-795042 ChiselPlowFertilizerPointAP-800105 AP-800106 StripTillPointBJ3AFall AP-505200 RipperPointBJ3ASpring AP-503300 RipperPoint1685 AP-001685 V-Slice1785 AP-001785 V-Slice1785VS AP-001785VS V-Slice1885 AP-001885 V-Slice1985XP AP-001985XP V-Slice1985XPVS AP-001985XPVS V-Slice164-050 AP-800106 StripTillPoint164-054 AP-800106 StripTillPoint164-057 AP-800106 StripTillPoint

quality agricultural equipment - agricultural innovations · quality agricultural equipment...

Documents