quality door & hardware - vision lites for wood & metal doors by … · standard finish for...

Vision Frames

Model Description Page

Vision Lites General Information

PAK Complete Vision Lite with Glazing & Tape Applied, Individually Packaged V1

VSL SLIMLINE Low Profile Beveled Vision Frame V2

SLR Round Low Profile Beveled Vision Frame V2

WOODLITE Low Profile Beveled Vision Frame with Wood Veneer Covering V2

VSIG Low Profile For Glass 1/4” to 1" Thick V3

VLF-EZ Beveled Vision Frame With 3/16" Return V4

VLF-EZ-IG Vision Frame For Glass Up To 1" Thick V5

VLF Square Return Vision Frame With Thru Bolt Installation V6

VLF-IG Vision Frame For Glass Up To 1-1/2" Thick And Door Up To 3" Thick V7

VLF-DG Vision Frame For 2 Lites Of Glass V8

STANDARD SHAPES Round, Half Round & Radius Vision VLF Frame V9

MULLIONS Vision Frames With Mullions For French Door Look V10

MULLIONS Mullions for Transoms & Sidelites V11

CUSTOM SHAPES Vision Frames With Custom Shapes V12

VLF-S10 Security Vision Frame With or Without Speaker Panel V13

VLF-SG Security Vision Frame with Security Grille V14

VLFEZIGMB VLF-EZ Vision Frame With Enclosed Miniblind V15

VSLIGMB VSL Slimline Vision Frame with Enclosed Miniblind V15

VLFEZHRC Hurricane Vision Frame V16

VLFIGHRC Hurricane Vision Frame V17

VISTA Moveable Privacy Glass Secure Vision Panel V18

FIND THE MOST CURRENT PRODUCT INFORMATION AT WWW.AIRLOUVERS.COM

Copyright 2013 Air Louvers, Inc. ALPDS0313

800-554-6077

MADE IN USA All vision lites are manufactured in the USA.

QUICK SHIP Many models of Vision Lites are available in one or more of our 8 warehouses in Lancaster PA, Bloomington MN, Commerce CA, Atlanta GA,

Seattle WA, Fort Myers FL, Dallas TX or Chicago IL. Check the Stock list at WWW.AIRLOUVERS.COM for the most current listing.

CUSTOM ORDERS & SPECIAL SIZES Because we design and manufacture our own lites & louvers in our California and Minnesota facilities, we can help you with special requests including non-standard sizes, special finishes or custom colors, and fitting non-standard doors. Call Customer Service to find out more.

MATERIAL All vision frames are fabricated from cold rolled steel unless otherwise noted. See specific model for respective gauge.

CONSTRUCTION All vision frames have mitered and flush welded corners with a continuous, glass retainer and countersunk mounting holes.

FASTENERS All models have pre-punched, countersunk holes for Phillips head sheet metal screws (provided with each vision frame). All screw and bolt heads match finish. Vandal or tamper-proof such as Torx head fasteners are available as well as other specialty fasteners.

FINISH Standard finish for most steel vision lites is a powder-coat mineral bronze unless otherwise noted. Air Louvers offers many more powder coat finishes at no additional charge for most models. Powder coating provides complete coverage inside and out, assuring that your vision frame will provide durable service for years. Powder coating generates no VOC’s during the process or after installation. Specify optional colors at the time of order. Other finishes and materials such as stainless steel and galvanized and custom color matching are available - con-tact Customer Service. Touch up paint available for most colors. View Color Samples Online

GLAZING Air Louvers carries a wide selection of fire & safety-rated glazing choices to fit our vision frames. Glazing to fit each frame is noted on the product data page.

SIZES All vision lites are made in commonly-ordered sizes to fit most door applications. The most popular model and sizes are carried in stock for immediate shipment from the factory - See our Warehouse Stock List. Dimensions are always given with width first and height second. Or-der dimensions should represent the size of the cut-out opening in the door.

PACKAGING Vision frames may be packaged individually or grouped in a box. Each package is marked with the respective model and size designation. Multiple unit orders may be shipped in corrugated cartons or wooden crates (on special order).

LISTING & MARKING Each vision frame that is fire-rated carries a permanent marking with the manufacturer, rating and listing agency. UL10B installations do not require fire-rated glazing tape to achieve the listing, however we recommend that a polyethylene glazing tape be applied to both sides of glass to avoid glass to metal contact which may result in breakage. Most vision frames have been tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure. Additional fire-rated intumescent glaz-ing tape may be required to meet those requirements. Please request at the time of order & see installation instructions.

GLAZING TAPE GTAPE 150: White non-fire-rated polyethylene glazing tape with adhesive backing - 1/16" x 3/8" x 150' GTAPE150B: Black non-fire-rated polyethylene glazing tape with adhesive backing - 1/16" x 3/8" x 150' FGS3000S45: Fire-rated intumescent tape with adhesive backing - 3/64” x 7/16” - 45 minute wood doors 16' FGS3000S90: Fire-rated intumescent tape with adhesive backing : 5/64” x 7/16” - 60-90 minute wood doors 16' FGS4590-7: Fire-rated intumescent tape with adhesive backing for Positive Pressure-Listed Doors - 20-45 minute wood doors - 7’ FGS4590-8: Fire-rated intumescent tape with adhesive backing for Positive Pressure-Listed Doors - 20-45 minute wood doors - 8’

Due to possible changes in the industry and manufacturing techniques, we reserve the right to modify any product without prior notification.

FIND THE MOST CURRENT PRODUCT INFORMATION AT WWW.AIRLOUVERS.COM

VISION LITES GENERAL INFORMATION

http://activarcpg.com/sites/default/files/StockLIst/Quick%20Ship%20Air%20Louvers.pdf

http://www.activarcpg.com/sites/default/files/products/TechnicalInformation/Air%20Louvers%20Paint%20Colors.pdf


Distributor: Width: _____ x Height: _____

Architect: Quantity:

Contractor: Model:

Project: Date:

800-554-6077 [email protected] [email protected] [email protected] FAX: 952-835-2218 VISIT WWW.ACTIVARCPG.COM FOR THE MOST UPDATED PRODUCT INFORMATION • AN ACTIVAR CONSTRUCTION PRODUCTS COMPANY

MFG: COMMERCE CA, BLOOMINGTON, MN • WAREHOUSES: LANCASTER PA, ATLANTA GA, CHICAGO IL, SEATTLE WA, FORT MYERS FL, DALLAS TX

Interpretation of Fire and Building Codes May Vary. Consult with the Local Authority Having Jurisdiction (AHJ) to determine appropriate standards.

V

Version: ALPDS0313

PAK OPTION: PACKAGED KIT, GLAZING & TAPE APPLIED

View Online Custom Order Form

Use 1 Page Per PAK Glass type

Select PAK Above in Steps 1-2

(VSL) SLIMLINE LITE KIT FOR 1-3/4” UL10B DOORS

20 gauge cold rolled steel frame with radius corners, mitered and welded, continuous glass retainer and counter-sunk mounting holes. Self-attaching, leaving corridor side of frame free of fasteners for aesthetic and security purposes. Durable Bronze powder coat finish. See data sheet for more information. Order Size is Cutout Size.

(VLFEZ) LITE KIT FOR 1-3/4” UL 10B DOORS

20 gauge cold rolled steel frame with mitered and welded corners, continuous glass retainer and countersunk mounting holes. Self-attaching, leaving corridor side of frame free of fasteners for aesthetic and security purpos-es. Durable Bronze powder coat finish. See data sheet for more information. Order Size is Cutout Size.

STEP 1: Select One UL-Rated Vision Lite Kit—VSL OR VLFEZ

STEP 2: Select One Glazing Choice (See Complete Descriptions and recommended Sizes in Glazing Section)

24-48 Hour Shipping for Many of these Sizes See Location Stock Listings for Availability & Shipping Schedule from Each Location

QTY SIZE QTY SIZE QTY SIZE QTY SIZE

5” x 35” 8” x 30 24” x 24” 24” x 60”

6” x 27” 8” x 32 24” x 30” 24” x 64”

7” x 22” 8” x 36 24” x 32” Other Size↓

8” x 18 12” x 12” 24” x 36” ____” Width x ____” Height

STEP 3: We Size the Glazing for the Kits You Select, Apply Glazing Tape and Package

If Not Submitting Order on this Form: Format as follows: Kit Size Glazing PAK. Example: VSL 1212 WS PAK

+

+

or

24-48 Hour Shipping for Many of these Sizes See Location Stock Listings for Availability & Shipping Schedule from Each Location

QTY SIZE QTY SIZE QTY SIZE QTY SIZE

5” x 35” 8” x 18” 12” x 12” 24” x 32”

6” x 27” 8” x 32” 24” x 24” Other Size↓

7” x 22 8” x 36” 24” x 30” ____” Width x ____” Height

___ (WS) WireShield - Wired Glass, CAT II Impact-rated, Fire-rated - WHI Listed, for UL10B Door Assy.

Size: Any size up to 36” x 92” depending on rating desired. Glazing Tape Applied. Available for most size frames above.

___ (TEMP) Tempered Glass - CAT II Impact-rated (Not Fire-rated) Size: Any size up to 60” x 104”. Glazing Tape Applied. Available for most size frames above.

___ (UL) Standard Wired Glass - Fire-rated - (Not CAT II Safety-rated) UL Listed, for UL 10B Door Assy.

(Size: Any size up to 54” x 54”* depending on rating desired. Glazing Tape Applied. Available for most size frames above.

___ (PPF) Pyran® Platinum F Glass (SAFTI FIRST)- CAT II Impact-rated, Fire-rated - UL Listed, for UL10B Door Assy. Size: Any size up to 36” x 77”* depending on rating desired. Glazing Tape Applied. Available for selected frame sizes above.

___ (KFRF) KeraShield FRF Ceramic Glass - CAT II Impact-rated, Fire-rated - UL Listed, for UL10B Door Assy. Size: Any size up to 46” x 78”* depending on rating desired. Glazing Tape Applied. Available for most size frames above.

Click Here to Check Stock List for My Combination of Vision Lite & Glazing

DON’T SEE YOUR SIZE OR VISION LITE HERE? We can Make up a PAK for any Vision Lite. Click Here for Online Order Form

mailto:[email protected]



activarcpg.com

http://www.activarcpg.com/sites/default/files/submittals/AirLouvers/Specialty%20PAK.pdf

http://www.activarcpg.com/air-louvers/products/10/glazing



http://www.activarcpg.com/air-louvers/product/42/vsl---slimline-vision-lite-for-3-16-1-4----glass




http://www.activarcpg.com/air-louvers/product/223/vlfez---beveled-vision-lite-

http://www.activarcpg.com/sites/default/files/submittals/AirLouvers/Specialty%20PAK.pdf

V2



Contractor: Model:

Project: Date:




Version: ALPDS0313

Low Profile Beveled Vision Lite For Fire Rated Doors. Self-Attaching for Glass 3/16” to 1/4” Frame Has Single-side Fasteners. Available in Round Shapes or Wood Veneer

SPECIFICATIONS:

Material: 20 gauge CRS frame. Min Size 3” x 3”, Max 60” x 104”. See Fire Rating Below.

Construction: 1-1/4” trim with radius corners, mitered and welded. Continuous glass retainer, countersunk mounting holes in the bevel on non-corridor side.

Door: For 1-3/4” door. For other sizes, see models VLFIG and VLFEZIG. Door cutout = order size.

Fasteners: #8 x 1” flathead phillips SMS to match finish.Woodlite has wood veneer plugs covering screw heads.

Powder Coat Finishes:

____ (B) Mineral Bronze ____ (G) Gray Primer (stock colors for VSL) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Color Samples Online

Glass:

3/16”- 1/4” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated appli-cations. Visible light is 2” under rough opening size. Glass size is 1” under order size. Fire-Rated Air Louvers Glazing to fit this Product: WS, UL, KFRF, PPF, PYRO.

Fire-Rating, Testing & Listings:

When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for max exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.

OPTIONS AT ADDITIONAL COST:

PAK: Includes Vision Lite, Glass Sized to Fit, Applied Glazing tape for UL10B Installations, Securely Packaged Individually. See First Page in Vision Lite Catalog to order.

UBC 7-2 Installation:

_____ Additional intumescent tape for Positive Pressure UL10C 20 minute combustible core wood doors installation. See detailed installation instructions.

Finishes & Materials:

_____ (S) 20 Gauge Stainless Steel: #4 Finish. _____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance.

Woodlite Wood Veneers:

_____ VWL .018 Wood Veneer to Match Wood Finish. (except round models) _____ Veneer Type: (WB) White Birch, (RO) Red Oak, (WO) White Oak, (MA) Maple, (CH) Cherry, (HM) Honduras Mahogany. See website for more colors & photos.

Fasteners: _____ Torx _____ Other: ______________________

Mullions: Factory welded to vision lite & painted. See Mullions Page in this section to order.

Round Vision Lite:

_____ SLR-12: One piece, 18 gauge construction. 11” glazing. (n/a (S) material) _____ SLR-18: One piece, 18 gauge construction. 17” glazing. (n/a (S) material)

Custom: Smaller or larger size or other options; Contact Customer Service for special orders.

SLIMLINE VISION KITS FOR 3/16-1/4” GLASS: VSL, SLR, VWL

STOCK ITEM - MANY STANDARD SIZES OF VSL FRAMES IN STOCK FOR

NEXT DAY SHIPMENT FROM ALL WAREHOUSES - LINK

Order Format: ____ ____ ____ ____ ____ Example: VSL 1212GH

VSL, SLR, VWL Option S,G,EG W H Color




activarcpg.com

http://www.activarcpg.com/air-louvers/product/410/vwl---slimline-wood-veneer-vision-kits-for-3-16-1-4----glass-





http://67.107.84.130/air-louvers/products/10/glazing

http://67.107.84.130/air-louvers/products?product_category=11&product_filter_1=&x=32&y=12

http://67.107.84.130/air-louvers/product/410/vwl---slimline-wood-veneer-vision-kits-for-3-16-1-4----glass-



http://67.107.84.130/air-louvers/product/401/vslg---mullions-for-vsl-vision-lites








Contractor: Model:

Project: Date:




V3

Version: ALPDS0313

SLIMLINE VISION LITE FOR 5/16 - 1” GLASS: VSIG

Low Profile Beveled Vision Lite For Fire Rated Doors. Corridor Side of Door is Free of Fasteners For Glazing thickness of 5/16” to 1”

Material: 20 gauge CRS frame. Min. size 3” x 3”, max. 60” x 104”. See Fire Rating Below.

Construction: 1-1/4” trim with radius corners, mitered and welded. Continuous glass retainer, coun-

tersunk mounting holes in the bevel on non-corridor side.

Door: For 1-3/4” door. For other sizes, see VLFIG and VLFEZIG. Door cutout = order size.

Fasteners: #8 x 1” flathead phillips SMS to match finish.


____ (B) Mineral Bronze (stock color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (G) Gray Primer ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Color Samples Online

Glass:

__________” Glass Thickness Will Be Used for this Order 5/16”-1” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 2” under rough opening size. Glass is 1” under order size. Must specify glass thickness above. If glazing is being provided by a supplier other than Air Louvers, coordinate with the supplier to ensure compatibility with IG kits. Fire-Rated Air Louvers Glazing to fit this vision frame: KFRL, KFRFU, SWISS45, CONTRA 60, ARMRSHIELD, LGSHIELD.


When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for max exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure. See Instructions

SPECIFICATIONS:



_____ (S) 20 Gauge Stainless Steel: #4 Finish. _____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Please provide color chip & contact Customer Service.



Custom: PAK, smaller or larger sizes, or other options, contact Customer Service for special orders.

Miniblind in Vision Lite:

Blinds are sealed between the two lites of glass. See separate VSLIGMB page in this section

STOCK ITEM - MANY STANDARD SIZES OF VSIG IN STOCK FOR NEXT DAY SHIPMENT FROM SEVERAL WAREHOUSES - LINK

Order Format: VSIG ____ ____ ____ ____ ____ Example: VSIG 1818B 01

Option S,G,EG W H Color Glass Thickness

Glass Thickness:




activarcpg.com






http://67.107.84.130/air-louvers/product/401/vslg---mullions-for-vsl-vision-lites

http://www.activarcpg.com/air-louvers/product/411/vsl-ig-mb---vision-lite-with-miniblind

http://www.activarcpg.com/air-louvers/product/411/vsl-ig-mb---vision-lite-with-miniblind


V4



Contractor: Model:

Project: Date:




Version: ALPDS0313

BEVELED VISION LITE FOR 3/16”-1/4” GLAZING: VLFEZ


Construction: 1-1/4” trim, with mitered and welded corners. Continuous glass retainer, counter-

sunk mounting holes in the bevel on non-corridor side. 3/8” projection from door.

Door: For 1-3/4” door. For other sizes, see VLFIG & VLFEZIG. Door cutout = order size.



____ (B) Mineral Bronze ____ (G) Gray Primer (stock colors) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Colors Online

Glass:

3/16” - 1/4” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 2” under rough opening size. Glass is 1” under order size. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO, PPF, KFRF.



SPECIFICATIONS:


PAK: Includes Vision Lite, Glass Sized to Fit, Applied Glazing tape for UL10B Installa-tions, Securely Packaged Individually. See First Page in Vision Lite Catalog.




_____ (S) 20 Gauge Stainless Steel: #4 Finish. _____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Please provide color chip & contact C.S.



Custom: Smaller or larger sizes. Leadlined. Contact Customer Service for special orders.

VL3000: Approved large glass lite with standard wire glazing approved to 90 minutes. See info on website. Note: Wire glass is not approved for hazardous locations.

STOCK ITEM - MANY STANDARD SIZES OF VLFEZ IN STOCK FOR NEXT DAY SHIPMENT FROM ALL WAREHOUSES - LINK

Order Format: VLFEZ ____ ____ ____ ____ Example: VLFEZ 1212AMS

Option S,G,EG W H Color

Self-Attaching, Beveled Vision Lite with Single Side Fasteners For Fire Rated Doors for 3/16” to 1/4”Glass




activarcpg.com






http://67.107.84.130/air-louvers/products?product_category=11&product_filter_1=&x=32&y=12

http://67.107.84.130/air-louvers/product/403/vlfezg---mullions-for-vlfez-vision-lites




Contractor: Model:

Project: Date:




V5

Version: ALPDS0313

Recommended for Applications Requiring Fire Rated, Safety, and or Insulated Glazing 5/16” to 1” Thick

BEVELED VISION LITE FOR ¼ - 1” GLAZING & UP TO 2-1/2” DOOR: VLFEZIG


Construction: 1-1/4” trim with radius corners, mitered and welded. Continuous glass retainer,

countersunk mounting holes in the bevel on non-corridor side. 3/8” projection.

Door: 1-3/8 - 2-1/2” door. Specify door thickness: ________ Door cutout = order size.



____ (B) Mineral Bronze (standard color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (G) Gray Primer ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Colors Online

Glass:

__________” Glass Thickness Will Be Used for this Order 5/16” - 1” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 2” under rough opening size. Glass is 1” under order size. Must specify glass thickness above. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO, KFRL, KFRFU, SWISS45, CONTRA60, ARMRSHIELD, LGSHIELD. If glazing is being provided by a supplier other than Air Louvers, coordinate with the supplier to ensure compatibility with IG kits.



SPECIFICATIONS:



_____ Additional intumescent tape for Positive Pressure UL10C 20 minute com-bustible core wood doors installation. See detailed installation instructions.





Custom: PAK, smaller or larger sizes. Leadlined. Contact Customer Service for Special Or-ders.

Miniblind in Vision Lite:

Blinds are sealed between the two lites of glass. See separate VLFEZIGMB page in this section.

Order Format: VLFEZIG ____ ____ ____ ____ ____ Example: VLFEZIG 1212S 01


Glass Thickness:

Door Thickness:




activarcpg.com






http://67.107.84.130/air-louvers/product/403/vlfezg---mullions-for-vlfez-vision-lites

http://www.activarcpg.com/air-louvers/product/412/vlf-ez-ig-mb---vision-lite-with-miniblind

http://www.activarcpg.com/air-louvers/product/412/vlf-ez-ig-mb---vision-lite-with-miniblind

V6



Contractor: Model:

Project: Date:




Version: ALPDS0313

VISION LITE FOR 3/16-1/4” GLASS: VLF



Construction: 1-1/4” trim with radius corners, mitered and welded. Continuous glass retainer,

countersunk mounting holes on both sides.

Door: For 1-3/4” door. Door cutout = order size.

Fasteners: #8 x 32 flathead phillips head thrubolts with blank heads one side to match finish.


____ (B) Mineral Bronze (standard color) ____ (G) Gray Primer ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Colors Online

Glass:

3/16” - 1/4” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 1” under rough opening size. Glass size is 1/4” under order size. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO, PPF, KFRF.



SPECIFICATIONS:







Custom: PAK, smaller or larger sizes. Leadlined. Please consult Customer Service for Special Orders. See Page 14 for Custom Shapes. See Page 11 for Round, Half-Round & Radius Frames in this Catalog.

Privacy Door: _____ VLFPVC 16 gauge door on continuous hinges welded to vision lite. Minimum size 4” x 4”, max size 60” x 60”. See Page V18 to order.

Standard, Multi-Purpose, Thru-Bolted Square Profile Vision Lite for Up to 1/4” Thick Glazing

Order Format: VLF ____ ____ ____ ____ Example: VLF 1212FBK

Option S,G,EG W H Color




activarcpg.com






http://67.107.84.130/air-louvers/product/402/vlfg---mullions-for-vlf-vision-lites

http://www.activarcpg.com/air-louvers/product/413/vlfpvc-vision-lite-metal-privacy-door-316-14%E2%80%9D-glass



Contractor: Model:

Project: Date:




V7

Version: ALPDS0313

Square Profile Vision Lite for Glass Thicker than 5/16” - Recommended for Applications Requiring Fire-Rated, Safety, and/or Insulated Glazing up to 1-1/2” Thick (REV A)

Material: 18 gauge CRS frame. Min. size 3” x 3”, max 60” x 104”. See Fire Rating Below.

Construction: 1-1/4” trim with mitered and welded corners, square return with countersunk mounting holes on both sides.

Door: For 1” - 3” thick. Specify door thickness: _________ Door cutout = order size.

Fasteners: #8 x 32 flathead Phillips head thru-bolts with blank head one side to match finish.



Glass:

__________” Glass Thickness Will Be Used for this Order 5/16” - 1-1/2” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 1” under rough opening size. Glass size is 1/4” under order size. Must specify glass thickness above. If glazing is being provided by a supplier other than Air Louvers, coordinate with the supplier to en-sure compatibility with IG kits. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO,KFRF, KFRL, KFRFU, SWISS45, CONTRA60, CONTRA90, ARMRSHIELD, LGSHIELD.





_____ Additional intumescent tape for Positive Pressure UL10C 20 minute com-bustible core wood doors installation. See detailed installation instructions.





Custom: PAK, smaller or larger sizes. Leadlined. Consult Customer Service for Special orders.

STANDARD VISION LITE FOR 5/16”- 1-1/2” GLASS & UP TO 3” DOOR: VLFIG

SPECIFICATIONS:

Order Format: VLFIG ____ ____ ____ ____ ____ Example: VLFIG 1227 BK 01


Glass Thickness:

Door Thickness:




activarcpg.com






http://67.107.84.130/air-louvers/product/402/vlfg---mullions-for-vlf-vision-lites

V8



Contractor: Model:

Project: Date:




Version: ALPDS0313

Recommended for Applications Where Two Lites of Glass are Required

Material: 18 gauge CRS frame. Min Size 3” x 3”, max size 60” x 104”.

Construction: 1-1/4” trim with mitered and welded corners, square return with counter-sunk mounting holes, 1/4” x1/4” continuous steel spacer provided.


Fasteners: #8 x 32 Phillips head thru bolts with blank head one side to match finish.


____ (B) Mineral Bronze (standard color) ____ (G) Gray Primer ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (AB) AMS Beige ____ (GH) Gray Hammertone View Colors Online

Glass:

3/16”- 1/4” glazing to be ordered separately from Glazing Section of catalog. Visible light is 1” under rough opening size. Glass is 1/4” under order size. Air Louvers Glazing to fit this Product: WS, UL, KFRF, PPF, PYRO.


When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for max exposed area. Tested and Listed for UL 10C and Crite-ria of UBC 7-2 Positive Pressure.



_____ Additional intumescent tape for Positive Pressure UL10C 20 minute combustible core wood doors installation. See detailed installa-tion instructions.


_____ (S) 18 Gauge Stainless Steel: #4 Finish. _____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Please provide color chip to Customer Service.

Mullions: Factory welded to vision lite & painted. See Mullions Page in this sec-

tion to order.View Mullions Page Online


Custom: PAK, smaller or larger sizes, leadlined. Consult Customer Service for Special Orders.

DOUBLE GLAZED VISION LITE: VLFDG

SPECIFICATIONS:

Order Format: VLFDG ____ ____ ____ ____ Example: VLFDG 1212 B Option S,G,EG W H Color




activarcpg.com






http://www.activarcpg.com/air-louvers/product/402/vlfg-mullions-vlf-vision-lites

http://www.activarcpg.com/product/vlfg-mullions-vlf-vision-lites



Contractor: Model:

Project: Date:




V9

Version: ALPDS0313

VLFRD

VLFR

VLF - STANDARD SHAPES - ROUND, RADIUS, HALF ROUND






Custom: Custom frame sizes, leadlined. Contact Customer Service for special orders.

Material: 18 gauge CRS frame.

Construction: Circular - one piece construction with no joints. Radius and half round are construct-ed with radius corners, mitered and welded with no exposed joints and countersunk

holes both sides.





Glass:

3/16” - 1/4” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with (WHI) or UL classification markings for fire rated applications. Visible light is 1” under rough opening size. Glass is 1/4” under order size. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO,KFRF. Non Fire-Rated Glazing: TEMP



SPECIFICATIONS:


Round: ___ VLFR12 ___ VLFR18 ___ VLFR24 ___ Custom _____” Standard widths shown above (Min size 4”, max size 60” diameter)

Radius Top & Bottom:

___ VLFRI-6 ___ VLFRI-12 ___ VLFRI-18 ___ VLFRI-24 ___ Custom _____” Standard widths shown above. (Min size 4 x 6”, max size 60 x 104”)

Radius Corner 6” Radius:

___ VLFRC12 ___ VLFRC18 ___ VLFRC24 ___ Custom _____” Standard widths shown above. (Min size 8” x 8”, max size 60 x 104”)

Half Round:

_____ VLFRD18 Dimensions: 46-1/2” x 18” Standard widths shown at left. _____ VLFRD20 Dimensions: 50-5/8” x 20” Min size 6” x 18” max size 36” x 60”) _____ VLFRD24 Dimensions: 58-3/4” x 24” Custom _____”W x _____” H

MODELS:

VLFRC

VLFRI

Order Format: _____ ____ ____ Example: VLFRD S 24

Model Option S,G,E Color




activarcpg.com






V10



Contractor: Model:

Project: Date:




Version: ALPDS0313

SPECIFICATIONS:

Material: 18 gauge CRS for VLF & VLFIG, 20 gauge for VLF-EZ, VLFEZIG, Slimline (VSL) and Slimline IG (VSIG).

Construction: Mullions are welded to both sides of vision lite at heads, sills and jambs, and butt to glass. Only one glass lite required.

Mullions: 1” x 5/8” formed steel See Page V11 to view selections.


Fasteners: See individual vision lite pages for fasteners.

Glass: Use fire-rated glazing with UL or WHI classification marking for fire rated applications. See individual data pages for glazing choices.


____ (B) Mineral Bronze (standard color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (S) Sand ____ (AB) AMS Beige ____ (R) Red ____ (GH) Gray Hammertone ____ (G) Gray Primer View Colors Online


When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for max exposed area. All models of vision lites for mullioned-vision lites are tested and listed for UL 10C and Criteria of UBC 7-2 Positive Pressure. See Individual Data Sheets.


Mullions: _____ 1/2” x 1/2”, 1/2 x 3/4”, other sizes, contact Cust. Service.



Fasteners: _____ Torx _____ Other: ________________

Custom: Custom frame sizes or specials. Contact Customer Service.

Square or Beveled Vision Lite with Mullions for Added Security or the “French Door” Look

MULLIONS FOR VISION LITES: VSL / VLF/ VLFEZ

VLFB2 VSLB2

Vision Frames - Mullions on Two Sides

# Mullions (See page

V11 for examples)

VSL Model

VLF Model

VLFEZ Model

1 VSLA2 VLFA2 VLFEZA2


2 VSLB2 VLFB2 VLFEZB2



4 VSLC3 VLFC3 VLFEZC3






Mullions are Constructed of 1" W x 5/8"

Formed Steel. New Codes for 2013—See pg. V11

Order Format: _______________ _____ ____ ____ ____ ____ Example: VLFB4 1836 VLF, VLFIG, VSL, VSIG, VLFEZ, VLFEZIG MULLION Option S,G,E W H Color Code




activarcpg.com








Contractor: Model:

Project: Date:




V11

Version: ALPDS0313

SPECIFICATIONS:

Material: Cold rolled steel

Construction: Mullions are welded at heads, sills and jambs, and butt to glass. Pre-drilled mounting holes are provided on the perimeter mullions. (fasteners by others)

Mullions: 3/4” x 3/4” steel tubes.

Std. Finish: Baked on powder coat gray prime for field painting.

Optional Powder Coat Finishes:

____ (B) Mineral Bronze (standard color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (S) Sand ____ (AB) AMS Beige ____ (R) Red ____ (GH) Gray Hammertone ____ (G) Gray Primer View Color Samples Online


Mullions: ______ Other sizes available, consult Customer Service


______ Galvanized steel. ______ Special order color. Please provide color chip.

Fasteners: _____ Torx _____ Other: _____________

Custom: Custom frame sizes or specials. Contact Customer Service.

Framed mullions for Transom and Sidelites Recommended for Divided Glass Look in Transom and Sidelites

FRAMED MULLIONS FOR TRANSOMS & SIDELITES: FRM

Transoms & Sidelites- Mullions for One Side

# Mullions Model

1 FRMA2

2 FRMA3

2 FRMB2

3 FRMB3

4 FRMB4

4 FRMC3

3 FRMA4

4 FRMA5

5 FRMB5

5 FRMC4

6 FRMC5

Mullions are Constructed of 3/4" x 3/4"

Steel Tubes

Order Format: FRM ____ ____ ____ ____ Example: FRMB5 2880B MULLION W H Color Code

Select Mullion Layout Here for

Pages V10 and V11

NOTE: NEW CODES FOR MULLIONS SHOWN BELOW A2 A3 B2 B3 B4 C3 A4 A5 B5 C4 C5




activarcpg.com





V12



Contractor: Model:

Project: Date:




Version: ALPDS0313

Many Specialty Designs Can be Manufactured Using the VLF Profile Including the Examples Shown

VLF CUSTOM SHAPES


Construction:

Radius and half round are constructed with radius corners, mi-tered and welded with no exposed joints. Holes are countersunk

on both sides.




____ (B) Mineral Bronze (standard color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (R) Red ____ (S) Sand ____ (AB) AMS Beige ____ (G) Gray Primer ____ (GH) Gray Hammertone View Colors Online

Glass:

3/16” - 1/4” glazing to be ordered separately from Glazing Sec-tion of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 1” under rough opening size. Glass is 1/4” under order size. Fire-Rated Air Louvers Glaz-ing to fit this vision frame: WS, UL PYRO,KFRF. Non Fire-Rated Glazing: TEMP



SPECIFICATIONS:






Fasteners: _____ Torx _____ Other: ___________________

Custom: Custom frame sizes, leadlined. Contact Customer Service & Provide Detailed Dimensions Information.

DRAWING AND DIMENSIONS ARE TO BE ATTACHED TO THIS PAGE




activarcpg.com








Contractor: Model:

Project: Date:




V13

Version: ALPDS0313

SPECIFICATIONS:

Material: 10 gauge CRS frame and 10 gauge perforated steel panel. Min size 4” x 4”, Max 60” x 104”. See Fire Rating Below.

Construction: 1-1/4” trim with mitered and welded corners, countersunk mounting holes both sides, and 1” wide glazing retainer.

Door: For 1 to 3” thick door. Specify door thickness: _____ Door cutout = order size.

Note: If glass thickness > door thickness, frame will be designed to fit the glass.


____ (B) Mineral Bronze (standard color) ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (R) Red ____ (SB) SC Beige ____ (SI) Silver ____ (S) Sand ____ (AB) AMS Beige ____ (GH) Gray Hammertone ____ (G) Gray Primer View Colors Online

Fasteners: #8 x 32 Torx head security binder bolt with blank head one side to match finish.

Glass:

__________” Glass Thickness Will Be Used for this Order. 1/4” - 1-1/2” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL classification mark-ings for fire rated applications. Visible light is 2-1/2” under rough opening size. Specify glass above. Glass is 1/4” under order size. If glazing is being provid-ed by a supplier other than Air Louvers, coordinate with the supplier to ensure compatibility with IG kits. See note in Door section above. Air Louvers Glazing to fit this vision frame: WS, PYRO, KFRL, DFRFU,SWISS 45, CONTRA 60, 90, ARMRSHIELD, LGSHIELD.


When installed in properly rated and approved door, ratings up to 3 hours can be achieved for model VLFS10 only, depending on the glazing used. See glazing ratings for max exposed area. Tested and Listed for UL 10C and Crite-ria of UBC 7-2 Positive Pressure. VLFS10SP not fire-rated.



_____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Please provide color chip & contact Customer Service.

Fasteners: _____ Other: ______________________

Speaker Panel:

_____ (S10SP) 10 gauge CRS frame and 10 gauge perforated steel speaker panel with

staggered holes. Speaker panel not fire, or pressure-rated.

Custom: Smaller or larger sizes, or other options. Contact Customer Service for special orders.

Security & Detention Vision Frame - Optional Speaker Port. Accommodates Glazing 1/4-1-1/2” Including Our Bullet-Resistant Glazing Selections

10 GAUGE SECURITY VISION LITE: VLFS10 & VLFS10SP

S10SP With Optional Speaker Panel

Order Format: VLFS10 ____ ____ ____ ____ ____ Example: VLFS10 1212G 01

Option G,E W H Color Glass Thickness

Glass Thickness:

Door Thickness:




activarcpg.com






V14



Contractor: Model:

Project: Date:




Version: ALPDS0313

SPECIFICATIONS:

Material: 18 gauge CRS frame. Min size 4” x 4”, Max 60” x 72”. See Fire Rating Below.

Grille: 12 gauge CRS with 13/16” square openings 1” on center.

Construction: Mitered and welded corners, countersunk mounting holes both sides, security grille welded to frame.





Glass:

3/16” - 1/4” glazing to be ordered separately from Glazing Section of catalog. Use fire rated glazing with Warnock Hersey (WHI) or UL clas-sification markings for fire rated applications. Visible light is 1” under rough opening size. Glass size is 1/4” under order size. Fire-Rated Air Louvers Glazing to fit this vision frame: WS, UL PYRO,KFRF


When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for max exposed area. Tested and Listed for UL 10C and Crite-ria of UBC 7-2 Positive Pressure.



_____ Additional intumescent tape for Positive Pressure UL10C 20 minute combustible core wood doors installation. See detailed installa-tion instructions.


_____ (S) 20 Gauge Stainless Steel: #4 Finish. _____ (G) Galvanized Sheet for Exterior Applications. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Provide color chip & contact Customer Service.


Custom: Smaller or larger sizes, leadlined. Consult Customer Service.

Security Vision Frame With Security Grille Each Side of Glass

VISION FRAME WITH 12 GAUGE SECURITY GRILLES: VLF-SG

VLF-SG-S in Optional Stainless Steel Finish

Order Format: VLF-SG ____ ____ ____ ____ Example: VLFSG 1212 AMS Option S,G,E W H Color




activarcpg.com








Contractor: Model:

Project: Date:




V15

Version: ALPDS0313

SPECIFICATIONS:


Construction: _____ VSIGMB - Lowest Profile Beveled Vision Frame. 1-1/4” trim. See page 3. _____ VLFEZIGMB - Beveled Vision Frame. 1-1/4” trim. See page 5.

Glass: 1.0” sealed unit. 2 panes of 1/8” clear tempered glass. Glass Size is 1” Under Vision Lite Order Size

Blinds: White painted 5/8” aluminum blinds. Blinds tilt a full 180 degrees for light control and privacy.

Operator: All Models Have Fingertip Raise, Lower and Tilt Control with Either 1 or 2 operators depending on Model.

Frame Finish: Mineral bronze powder coat finish. Optional color by request only.

Standard Sizes of Glass Unit:

8 x 36, 8 x 64, 14 x 64, 20 x 36, 20 x 64, 22 x 36, 22 x 48, 22 x 64, 22 x 80

Standard Sizes of Vision Lite to fit Above Glass:

Door cutout = order size. ___ 9 x 37” ___ 9 x 65” ___ 15 x 65” ___ 21 x 37” ___ 21 x 65” ___ 23 x 37” ___ 23 x 49” ___ 23 x 65” ___ 23 x 81”


The Ideal Solution for Privacy - Low Profile Vision Lite With Blinds Built In-Between the Insulated Glass Choose an Attractive, Dust-free Miniblind that is Maintenance Free

VISION LITE WITH MINIBLIND: VSIGMB & VLFEZIGMB

Frame Material: _____ (S) 20 Gauge Stainless Steel: #4 Finish.

Custom: Other Sizes, or Options; Contact Customer Service.

Blinds: _____ Other Colors. _____ Cord, Wand or Knob Operator

Full Door with VSIGMB 2264

Order Format: _______________ ____ ____ Example: VSIGMB 2264 VSIGMB or VLFEZIGMB W H

VISION LITE ORDER SIZE IS DOOR OPENING SIZE. GLASS IS 1” UNDER ORDER SIZE.

VLFEZIGMB

VLFEZIG Profile VSIG Profile




activarcpg.com


V16



Contractor: Model:

Project: Date:




Version: ALPDS0313

SPECIFICATIONS:

Material: 20 gauge galvanized frame. Min size 3” x 3”, max 24” x 62”. See Windstorm Rating Below

Construction:

1-1/4” trim with mitered and welded corners, beveled return, and countersunk mounting holes in the bevel. Screws fasten from room side into pre-punched mounting holes. This mounting method leaves corridor side of frame free of fasteners for aesthetic and security purposes.





Glazing: 1/4” Polycarbonate Glass size is 1” under order size

Caulking : SIKAFLEX 552 for caulking on both sides of glazing.

Glazing & Caulking included with Vision Frame


Glazing: 1/4” thick clear Polycarbonate (Not a fire-rated glazing) Glass size is 1” under order size.


_____ (S) 22 Gauge Stainless Steel: #4 Finish. _____ (E) Electro Zinc Plating for Maximum Corrosion Resistance. _____ Optional colors. Please provide color chip & contact Customer Service.

Mullions: Factory welded to vision lite & painted. See Mullions Page in this sec-

tion to order.


Beveled Vision Lite With Continuous Glass Retainer. Recommended for Applications Requiring Safety From Wind-Borne Debris. Includes Tested and Approved Polycarbonate Glazing and Caulking

Severe Windstorm Approved Vision Frame Tested in Accordance with ASTM E330, ASTM E1886, ASTM E1996 ANSI A250.13 TAS 203, 201, 202 Impact (ft lb) 350 Missile Level D, DP Rating (PSF) 55

HURRICANE & HIGH WIND VELOCITY LITE KIT: VLFEZHRC

Florida Building Code Approval

File # FL13187

Order Format: VLFEZHRC ____ ____ ____ ____ Example: VLFEZHRC 1212S Option S,E W H Color




activarcpg.com






http://www.activarcpg.com/air-louvers/product/401/vslg-mullions-vsl-vision-lites



Contractor: Model:

Project: Date:




V17

Version: ALPDS0313

SPECIFICATIONS:

Material: 18 gauge galvanized frame. Min size 3” x 3”. Max size 30” x 60-1/2””

Construction: 1-1/2” trim with mitered and welded corners, square re-turn and countersunk mounting holes on both sides.

Sealing: Between Frame & Glass: Sponge rubber, EPDM, neo-prene press-on glazing tape 1/8” x 3/8”. Dow Corning #995 (or equal) silicone structural glazing sealant applied per Dow Corning instructions. Between Door & Frame Perimeter: Closed cell EPDM press-on glazing tape 1/4” x 3/8” applied to inside face of lite kit frame. Screw Entry Points: We recommend that a Neoprene “O”-Ring, 7/32” I.D. with 1/16” wall, 50-70 Durometer, be used at each screw head. (provided by others) Setting Blocks to Suit: EPDM or neoprene setting blocks 1/16” minimum thickness at quarter points of bot-tom of glass and elsewhere as needed.

Finish: ____ (B) Mineral Bronze ____ (G) Gray Primer

Door: For 1-3/4” to 3”door. Door Size: ____ Door cutout = order size.


Glass: Glass in Included with Each Unit: Glass 5/16” thick configuration; (2) 1/8” heat-strengthened glass lites sepa-rated by 0.075” interlayer.

Recommended for Applications Requiring Safety From Wind-Borne Debris. Includes Tested and Approved, Glazing Components as Listed Below.

Severe Windstorm Approved Vision Frame Tested in Accordance with ASTM E330, ASTM E1886, ASTM E1996 ANSI A250.13 Impact (ft lb) 350 Missile Level D Structural (PSF) +/- 70

HURRICANE & HIGH WIND VELOCITY LIGHT KIT: VLFIGHRC


Mullions: Factory welded to vision lite & painted. See Mullions Page

in this section to order.

Door Thickness:




activarcpg.com

http://www.activarcpg.com/air-louvers/product/402/vlfg---mullions-for-vlf-vision-lites

V18



Contractor: Model:

Project: Date:




Version: ALPDS0313

Adjust this Patented, Maintenance-Free Window for Obscure or Vision with the Turn of A Lever Ideal for Hospitals and other Commercial Settings where Privacy is Desired

SPECIFICATIONS:

OPTIONAL FEATURES AT ADDITIONAL COST:

PRIVACY GLAZED SECURE VISION PANEL BY VISTAMATIC®: VISTA

Open Position Etched Lines

Closed Position Etched Lines

Construction: The glazed secure vision panel by Vistamatic® is manufactured with 3 panes of glass sealed together as an insulated, dustproof unit. Optional glass thicknesses can pro-duce a thicker unit. Each panel is made to order. No maintenance of panel needed.

Operation: When operator is turned, the middle pane of glass is raised, aligning the obscure stripes so that viewing is permitted. When the operator is rotated back, the middle pane is lowered, stripes are offset, obscuring the view through the panel.

Glass:

11/16” sealed unit with multiple panes of 1/4” clear tempered glass. 1” obscuring stripes are 1” apart. Visible light is 1-¼” under order size. Not fire-rated with tem-pered glass. _____ Etched Lines (Partially opaque see photo at right) _____ Color Vinyl Lines. (100% opaque) _____ Red _____ Black _____ White Note: larger sizes may require 2 operators with a center mullion to hide mechanism.

Lite Kit: 20 gauge CRS frame with countersunk mounting holes on non-corridor side and 1-3/8” face trim.

Powder Coat Finishes for Lite Kit:

____ (B) Mineral Bronze (standard color) View Colors Online ____ (G) Gray ____ (BK) Black ____ (FBK) Flat Black ____ (W) White ____ (SB) SC Beige ____ (SI) Silver ____ (S) Sand ____ (AB) AMS Beige ____ (R) Red ____ (GH) Gray Hammertone

Standard Sizes - Order by Opening Size:

_____ 11¼” x 11¼” _____ 13¼” x 13¼” _____ 19¼” x 19¼” _____ 6¼” x 21¼” _____ 7¼” x 31¼” _____ 25¼” x 31¼” (Visible light is 1-¼” under order size)

Operator:

3” Chrome-plated Handle. With standard vision lite, bottom of handle operator will be 1/8” above the edge of the vision frame. Mounted at bottom of panel. Lifetime warranty.

_____ One Side Only _____ Both Sides of Panel

Vista-Slide™ _____ Panels slide side to side instead of up and down. Stripes of pattern are vertical instead of horizontal. Photo above.

Full Length Panel _____ Max-XL™ panel features adjustable top half and obscure bottom half.

VistaPort ™ _____ Round vision panel with 15-3/4” visible light for 17” cutout. Call for pricing.

Glass:

_____ 1/4” Laminated Glass _____ 1/2” Laminated Glass ____ Other Vinyl Color

_____ Other Tempered Glass. _____ 20 Minute Fire-Rated ____ 45 Minute Fire-Rated

_____ Leadlined _____ Bullet -Resistant _____ Custom Graphic or Logo

Operator: _____ Ligature Free Knob (up to 18” x 18”) ____ Locking Key Knob ____ Lig. & Key

Other Sizes: Custom sizes available. Call for quotation.

OTHER PRIVACY OPTIONS: VLF Vision Lite with Metal Privacy Door—view online




activarcpg.com


http://www.activarcpg.com/air-louvers/product/413/vlfpvc---vision-lite--with-metal-privacy-door-for-3-16-1-4----glass

quality door & hardware - vision lites for wood & metal doors by … · standard finish for...

Documents