quectel cellular engine - microelectronicos commands.pdf · 2014-05-05 · flow control open...

M10 R2.0&R1.0 AT Commands Comparison

M10 R2.0&R1.0_ATC_Comparison_V1.1 -0-

GSM Quectel Cellular Engine

M10 R2.0&R1.0

AT Commands

Comparison M10 R2.0&R1.0_ATC_Comparison_V1.1



General Notes

Quectel offers this information as a service to its customers, to support application and

engineering efforts that use the products designed by Quectel. The information provided is

based upon requirements specifically provided for customers of Quectel. Quectel has not

undertaken any independent search for additional information, relevant to any information

that may be in the customer’s possession. Furthermore, system validation of this product

designed by Quectel within a larger electronic system remains the responsibility of the

customer or the customer’s system integrator. All specifications supplied herein are subject to

change.

Copyright

This document contains proprietary technical information of Quectel Co., Ltd. Copying this

document, distribution to others, and communication of the contents thereof, are forbidden

without permission. Offenders are liable to the payment of damages. All rights are reserved in

the event of a patent grant or registration of a utility model or design. All specifications

supplied herein are subject to change without notice at any time.

Copyright © Shanghai Quectel Wireless Solutions Ltd. 2012

Document Title M10 R2.0&R1.0 AT Commands Comparison

Revision 1.1

Date 2012-03-31

Status Released

Document Control ID M10 R2.0&R1.0_ATC_Comparison_V1.1

Quectel

Confidentia

l



Contents

Contents ............................................................................................................................................ 2

0. Revision history ............................................................................................................................ 3

1. Introduction ................................................................................................................................... 4

2. Functionality comparison .............................................................................................................. 5

3. AT commands comparison ............................................................................................................ 6

3.1. Serial interface commands ................................................................................................. 6

3.1.1. AT+IFC Set TE-TA local data flow control .......................................................... 6

3.2. SIM commands .................................................................................................................. 6

3.2.1. AT+CCUG Close user group control ................................................................... 6

3.2.2. AT+CSIM Generic SIM access ............................................................................ 6

3.3. Call commands ................................................................................................................... 7

3.3.1. ATDL Redial last telephone number used ............................................................ 7

3.3.2. AT+CKPD Keypad control .................................................................................. 7

3.4. GPRS commands ............................................................................................................... 7

3.4.1. AT+CGQREQ Quality of service profile (Requested) ......................................... 7

3.5. Audio commands ................................................................................................................ 8

3.5.1. AT+QSRT Select ring tone ................................................................................... 8

3.6. File commands ................................................................................................................... 8

3.6.1. AT+QFGR Read customer file ............................................................................. 8

3.6.2. AT+QFGW Write customer file ........................................................................... 8

3.6.3. AT+QFGL List customer files .............................................................................. 8

3.6.4. AT+QFGD Delete customer file ........................................................................... 9

3.6.5. AT+QFGM Query free space for customer file .................................................... 9

3.8. MMS commands ................................................................................................................ 9

3.8.1. AT+QMMSMS Set MMS’s SMS transactor ........................................................ 9

3.9. Hardware related commands ............................................................................................ 10

3.9.1. AT+QALARM Set alarm ................................................................................... 10

3.10. Others ............................................................................................................................. 10

3.10.1. A/ Re-issue the last command given ................................................................ 10

3.10.2. AT+QCLKOUT Output clock source ............................................................... 10

3.10.3. AT+QNITZ Network time synchronization ..................................................... 11

Quectel

Confidentia

l



0. Revision history

Version Date Author Description

1.0 2012-02-17 Derrick DAI Initial

1.1 2012-03-28 Bonnie Zhao 1. M12 R2.0 supports Recording

2. Deleted AT+QSCANF

3. Modified default value of

AT+QMMSMS

4. Added <ds> for AT+QNITZ

Quectel

Confidentia

l



1. Introduction

M10, built on MTK new platform, (hereinafter to be referred as M10R2.0) is launched officially.

Adopted the latest platform MT6252, M10 R2.0 inherits all of the functionality of MT6223

chipset.

This document introduces the difference of AT commands between M10 software version R2.0

M10ER01A03W32 and M10 version R1.0.

Quectel

Confidentia

l



2. Functionality comparison

The difference of software function between M10R1.0 and M10R2.0 is listed as below:

Functions M10 R1.0 M10 R2.0

Flow control Open hardware flow control

(Default)

Close flow control

(Default)

SMS Support Support

Voice Call Support Support

Data Call Support Support

FAX Support Not supported

CMUX Support Support

Dual UART Support Support

PPP Support Support

TCP/UDP Support Support

MMS Support Support（refer to AT+QMMSMS）

FTP Support Support

SMTP Support Support

HTTP Support Support

GSM Location Support Support

File Support Support

DTMF Decoding Support Support

NITZ Support Support

PING Support Support

NTP Support Support

RECORDING Not supported Support

TCP/UDP over GPRS Support Support

TCP/UDP over CSD Support Supported later

Quectel

Confidentia

l



3. AT commands comparison

3.1. Serial interface commands

3.1.1. AT+IFC Set TE-TA local data flow control

M10 R1.0 M10 R2.0

AT+IFC?

+IFC:2,2

OK

AT+IFC?

+IFC:0,0

OK

Difference Close flow control by default in M10 R2.0

3.2. SIM commands

3.2.1. AT+CCUG Close user group control

M10 R1.0 M10 R2.0

AT+CCUG=1,9,1

OK

AT+CCUG=1,8

OK

AT+CCUG=1,9,1

OK

AT+CCUG=1,8

ERROR

Difference M10 R2.0 does not support default setting of the

third parameter.

3.2.2. AT+CSIM Generic SIM access

M10 R1.0 M10 R2.0

AT+CSIM=?

+CSIM:

(0,1),<file_id>,<offset>/<record_id>,<len>/

"data"

OK

AT+CSIM?

OK

AT+CSIM=?

OK

AT+CSIM?

ERROR

Quectel

Confidentia

l



Difference M10 R2.0 does not support AT+CSIM

3.3. Call commands

3.3.1. ATDL Redial last telephone number used

M10 R1.0 M10 R2.0

ATDL

Redial last telephone number used

ATDL

+CME ERROR: not found

Difference M10 R2.0 does not support ATDL.

3.3.2. AT+CKPD Keypad control

M10 R1.0 M10 R2.0

AT+CKPD=?

OK

AT+CKPD=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+CKPD.

3.4. GPRS commands

3.4.1. AT+CGQREQ Quality of service profile (Requested)

M10 R1.0 M10 R2.0

AT+CGQREQ?

+CGQREQ: 1,0,0,0,0,0

+CGQREQ: 2,0,0,0,0,0

+CGQREQ: 3,0,0,0,0,0

OK

AT+CGQREQ?

+CGQREQ: 1,0,0,3,0,0

+CGQREQ: 2,0,0,3,0,0

+CGQREQ: 3,0,0,3,0,0

OK

Difference Default values are different.

Quectel

Confidentia

l



3.5. Audio commands

3.5.1. AT+QSRT Select ring tone

M10 R1.0 M10 R2.0

AT+QSRT=?

+QSRT: (1-10)

OK

AT+QSRT=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QSRT.

3.6. File commands

3.6.1. AT+QFGR Read customer file

M10 R1.0 M10 R2.0

AT+ QFGR=?

OK

AT+ QFGR=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QFGR.

3.6.2. AT+QFGW Write customer file

M10 R1.0 M10 R2.0

AT+ QFGW=?

OK

AT+ QFGW=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QFGW.

3.6.3. AT+QFGL List customer files

M10 R1.0 M10 R2.0

AT+ QFGL=?

OK

AT+ QFGL=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QFGL.

Quectel

Confidentia

l



3.6.4. AT+QFGD Delete customer file

M10 R1.0 M10 R2.0

AT+ QFGD=?

OK

AT+ QFGD=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QFGD.

3.6.5. AT+QFGM Query free space for customer file

M10 R1.0 M10 R2.0

AT+ QFGM=?

OK

AT+ QFGM=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QFGM.

3.8. MMS commands

3.8.1. AT+QMMSMS Open/close MMS receive function

M10 R1.0 M10 R2.0

AT+ QMMSMS?

+QMMSMS:0

OK

AT+ QMMSMS?

+QMMSMS:1

OK

Difference

Default values are different.

Customer must set AT+QMMSMS=0 when

customer uses MMS receive function in M10

R2.0 .

Quectel

Confidentia

l



3.9. Hardware related commands

3.9.1. AT+QALARM Set alarm

M10 R1.0 M10 R2.0

AT+ QALARM =?

+QALARM:

(0,1),"DATE,TIME",(0-3),(0-2)

OK

AT+ QALARM =?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QALARM.

3.10. Others

3.10.1. A/ Re-issue the last command given

M10 R1.0 M10 R2.0

A/

Re-issue the last command given

A/

ERROR

Difference M10 R2.0 does not support A/.

3.10.2. AT+QCLKOUT Output clock source

M10 R1.0 M10 R2.0

AT+QCLKOUT=?

+QCLKOUT: (0,1),(1-4)

OK

AT+QCLKOUT=?

+CME ERROR: 100

Difference M10 R2.0 does not support AT+QCLKOUT.

Quectel

Confidentia

l



3.10.3. AT+QNITZ Network time synchronization

M12 R1.0 M12 R2.0

AT+QNITZ=1

+QNITZ: <time>

OK

AT+QNITZ=1

+QNITZ: <time>,<ds>

OK

Difference M12 R2.0 adds <ds> Daylight Saving Time.

Quectel

Confidentia

l



Shanghai Quectel Wireless Solutions Co., Ltd.

Room 501, Building 13, No.99 Tianzhou Road, Shanghai, China 200233

Tel: +86 21 5108 6236

Mail: [email protected]

mailto:[email protected]

quectel cellular engine - microelectronicos commands.pdf · 2014-05-05 · flow control open...

Documents